CE-09 xx Non-insulation type DC-DC converter

Size: px

Start display at page:

Download "CE-09 xx Non-insulation type DC-DC converter"

Sarah Holland
6 years ago
Views:

1 CE-9 xx Non-insulation type DC-DC converter Features SMD type Short in height: 4.mm or 4.mm Equipped with variable output voltage (single output type only) Wide range of operating temperature conditions: -4 C to +8 C (CE-97 - CE-99: - to +7 ) -side metal-shielded low noise design Delivery in tray or by taping available Model naming method CE-96-TP Packing type TP: Taping None: Tray Applications Product Line up Model number Series name Model name CE-96 CE-97 CE-98 CE-99 CE-9 CE-9 CE-9 CE-9A CE-98LC CE-9 Input voltage (V) Output voltage (V) ± ± Output current (ma) /ch 6 6 4/ch Output power (W) Model name CE-97 CE-994 CE-97 CE-99 CE-99 Input voltage (V) Output voltage (V) Output current (ma) Output power (W) Conformity to RoHS Directive This means that, in conformity with EU Directive /9/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. -/84/etl_ce_9XX

2 CE-9xx Specifications ITEMS/UNIT MODEL CE-96 CE-97 CE-98 CE-99 CE-9 CE-9 CE-9 CE-9A CE-98LC CE-9 Nominal Voltage V DC./. DC. DC DC./. DC. DC./. Input Voltage Range V DC.-. DC.-.6 DC4.-. DC.-. DC.-.6 DC.-. Efficiency (typ) (*) % Nominal Voltage VDC Maximum Current (*) ma /ch 6 4/ch Maximum Power (*) W Output Max Power Total Regulation (max) (*4) % 4 4 Maximum Ripple & Noise (typ) (*) mvp-p Maximum Ripple & Noise (max)(*) mvp-p Voltage Adjustable Range VDC Fixed Fixed Over Current Protection Available Function Over Voltage Protection Remote ON/OFF Control Operating Temperature -4 to +8 Storage Temperature -4 to +8 Operating Humidity % RH -9 (the conditions of maximum 8 C in wet bulb temperature and non-condensation should be ensured.) Environment Storage Humidity % RH -9 (the conditions of maximum 8 C in wet bulb temperature and non-condensation should be ensured.) Vibration -Hz, 4 minutes sweep and 98m/s² (G) acceleration, directions,.h for each, in non-operation Shock 98m/s² (G), 6ms, directions, times for each, in non-operation Weight g. Mechanical Size (W x H x D) mm 8 x 4 x.8 (*) In CE-96: =V, and Io=Io=mA. In CE-97: =.V, nominal output voltage, Io=mA. In CE-98: =.V, nominal output voltage, Io=mA. In CE-99/9/9: =.V, nominal output voltage, Io=mA. In CE-9: =.V, Io=Io=4mA. (*) For the output side (Io) of dual-output models (CE-96/9), refer to the items of output voltage setting in the instructions. (*) The maximum output power value is that of nominal output voltage x maximum output current. (*4) Max power total regulation (% ) is the regulation of the set output voltage including load change, input change, and temperature change. Condition of Io for dual-output models (CE-96/9):. x Io < Io <. x Io (*) In MHz, Ta= C. With nominal input/output voltage, maximum output current, and Ta= C, if not specified separately. 8-ø.8 Outline Drawing CE-9xx TDK-Lambda MADE IN JAPAN Lot No ±. P P P.4.±. 8± max. P=±..4 (9.4) Derating Curve

3 CE-9xx Specifications ITEMS/UNIT MODEL CE-97 CE-994 CE-97 CE-99 CE-99 Input Voltage Range Nominal:VDC V DC4.-. Efficiency (typ) (*) % Nominal Voltage (*) V Maximum Current ma Maximum Power (*) W..8 Maximum Line Regulation Within input voltage range (typ).%.%.%.% Output Maximum Load Regulation (-%)(typ).% %.% Temperature Coefficient (- to C)(typ) (*4) %.. Max Power Total Regulation (max) % Maximum Ripple & Noise (typ) (*) mvp-p 4 7 Maximum Ripple & Noise (max) (*) mvp-p Acceptable Output Capacitorco (*6) μ F Over Current Protection Available Function Over Voltage Protection Remote ON/OFF Control Operating Temperature - to +7 Storage Temperature -4 to +8 Operating Humidity % RH -9 (the conditions of maximum 8 C in wet bulb temperature and non-condensation should be ensured.) Environment Storage Humidity % RH -9 (the conditions of maximum 8 C in wet bulb temperature and non-condensation should be ensured.) Vibration -Hz, minutes sweep and 98m/s² (G) acceleration, directions, h for each, in non-operation Shock 98m/s² (G), 6ms, directions, times for each, in non-operation Weight g. Mechanical Size (W x H x D) mm 7. x 4. x.8 (*) In nominal input voltage, maximum output current, and Ta= C. (*) V in CE 994 is the value when and + are short-circuited. -V in CE 99 is the value when and + are short-circuited. (*) The maximum output power value is between - C and + C. For use outside this temperature rage, derating is needed. (*4) Temperature coefficient in - C - + C. (*) Frequency range in measurement (MHz). Ripple & noise value is that in the condition where a specified external output capacitor Co is attached to the output terminal. (*6) Use an external output capacitor with Ωmax. impedance and.6 max. loss angle. Recommended capacitor: TE series (MATSUSHITA) With nominal input/output voltage, maximum output current, and Ta= C, if not specified separately. 8-ø.8 Outline Drawing.. 4 CE-9xx TDK-Lambda MADE IN JAPAN Lot No P P P (Board thickness) (.7) 7. 4.max. P=. 4.9 (8.9) Derating Curve

4 4 CE-9xx Instruction Manual. CE-96,-97,-98,-99,-9,-9,-9,-9A,-98LC,-9 -. Connection diagram -. Output voltage setting CE-96,-9 CE-97,-98,-98LC Terminal assignments No. No. No. No.4 No. No.6 No.7 No.8 CE-96 CE-9 Vo CE-97 CE-98 CE-98LC CE-99 CE-9 Vo CE-9 CE-9A CE-9 CE-99,-9 -. Output voltage setting To change the output voltage, calculate Rex by assigning the absolute value of the output voltage to in the expression below, and attach it between the terminals to be connected. CE CE-9 CE CE CE CE-9A,-9 CE-9 CE-9A The No. // terminals are the internally common terminals. However, if possible, use the No. terminal for the input-side, and the No. terminal for the output-side. (Or, use them as solid.) It is not necessary to connect the No. terminal to. CE-98LC CE Output current range (dual-output type) CE-96 CE

5 . CE-97,-994,-97,-99, Connection diagram CE-97/CE-994 ut Ci R R Co -. Output voltage setting To raise the output voltage, calculate R or R by assigning the absolute value of the output voltage to in the expression below, and attach it between the terminals to be connected. CE-97 R= CE-97/CE-99/CE C i 7 6 R R - Ci: External input capacitor (V, μf) Co: External output capacitor (Refer to specifications.) L: Load (electronic load module) -. Terminal assignments Terminal assignments No. No. No. No.4 No. No.6 No.7 No.8 CE-97 CE ut Co + CE-97 CE-99 CE CE-994 CE-97 CE-99 CE To reduce the output voltage, calculate R or R by assigning the absolute value of the output voltage to in the expression below, and attach it between the terminals to be connected. CE-97 CE-994 CE-97 CE-99 CE R= R= R= R= -4.6

6 . Notes on mounting and handling The connection diagrams in these handling instructions represent the standard connection methods for this product. Consult us for use with other connection methods. When a choke coil is to be connected between the input power supply and the No. terminal, it should be of 4.7µH or lower Otherwise, maximum ripple voltage may increase. If the ripple voltage of the input power supply is high, or the ripple returned to input from the converter should be reduced, connect a capacitor with the appropriate capacity. For proper start-up of the converter, the start-up time of the input voltage should be 4ms or less. The time after the input voltage becomes.v until it reaches the specified input voltage range, should be 4ms or less. Parallel operation of outputs for enhancing the output current of the converter is not applicable. Series connection is not applicable for this product. Input fuse is not installed in this product. Do not use this product in an overload condition. Doing so can cause failure. Cleaning is not applicable for this product. Use low-residue or non-cleaning flux. Recommended reflow soldering conditions 4 8 s max s max Notes on storage Keep this product indoors with little temperature/humidity change and away from direct sunlight. Note that if this product is kept in a hot and humid condition or in a condition with drastic temperature changes, it can cause condensation, performance deterioration, or solderability deterioration.

CE-09xx. CE-09xx Specifications. Outline Drawing. Derating Curve

CE-09xx. CE-09xx Specifications. Outline Drawing. Derating Curve CE-9 xx その他その他 -//etl_ce_9xx CE-9xx Specifications Nominal Voltage V DC./. DC. DC DC./. DC. DC./. Input Voltage Range V DC.-. DC.-. DC4.-. DC.-. DC.-. DC.-. Efficiency (typ) (*) 8 88 7 8 7 9 Nominal Voltage