Multilayer Balun Transformers
|
|
|
- Daniella Boone
- 5 years ago
- Views:
Transcription
1 Multilayer Balun Transformers For GSM9 Tx & Rx HHM Series Type: HHM776B (.6.8.6mm) HHM76B (.6.8.6mm) HHM7B (.6.8.6mm) HHM76P (.6.8.6mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
2 (/8) Multilayer Chip Baluns For EGSM/Tx & Rx Conformity to RoHS Directive HHM Series HHM776B SHAPES AND DIMENSIONS.5±..6±..55±..±..5±..6±..±..8±. Terminal functions Unbalanced port GND or DC feed+ RF GND Balanced port 4 Balanced port 5 GND 6 N.C. RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 5Ω 5Ω 88 to 96MHz db min. 8±deg. ±.db.db max. 4 to +85 C 4 to +85 C 4pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
3 (/8) FREQUENCY CHARCTERISTICS Unbalance 5Ω /Balance 5Ω RETURN LOSS Return loss(db) INSERTION LOSS Insertion loss(db) dB 7.46dB 4.dB.8dB.8dB.88dB AMPLITUDE BALANCE Amplitude balance(db) PHASE BALANCE Phase balance(deg.) dB.8dB.6dB 75.8deg deg. 74.4deg. - / 6 / e75_multibalun_hhm
4 (/8) Multilayer Chip Baluns For EGSM/Tx & Rx Conformity to RoHS Directive HHM Series HHM76B SHAPES AND DIMENSIONS.6±..55±..±..5±..6±..±..8±. Terminal functions Unbalanced port GND or DC feed+ RF GND Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input 5Ω Balanced output 5Ω RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 5Ω 5Ω 88 to 96MHz db min. 8±deg. ±.db.4db max. 4 to +85 C 4 to +85 C 4pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
5 (4/8) FREQUENCY CHARACTERISTICS Unbalance 5Ω /Balance 5Ω RETURN LOSS Return loss(db) dB.7dB 9.4dB AMPLITUDE BALANCE Amplitude balance(db) 5 4.7dB.9dB.dB INSERTION LOSS Insertion loss(db).5..db.5.9db..5.89db PHASE BALANCE Phase balance(deg.) deg. 77.6deg. 76.7deg. - / 6 / e75_multibalun_hhm
6 (5/8) Multilayer Chip Baluns For EGSM/Tx & Rx Conformity to RoHS Directive HHM Series HHM7B SHAPES AND DIMENSIONS.6±..55±..±..5±..6±..±..8±. Terminal functions Unbalanced port GND or DC feed+ RF GND Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input 5Ω Balanced output Ω RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 5Ω Ω 88 to 96MHz db min. 8±deg. ±.db.4db max. 4 to +85 C 4 to +85 C 4pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
7 (6/8) FREQUENCY CHARACTERISTICS Unbalance 5Ω /Balance Ω RETURN LOSS Return loss(db).4db 6.45dB 8.7dB AMPLITUDE BALANCE Amplitude balance(db) 5 4.7dB.dB.5dB INSERTION LOSS Insertion loss(db).5..7db.5.97db..5.db PHASE BALANCE Phase balance(deg.) deg. 77.9deg. 77.5deg. - / 6 / e75_multibalun_hhm
8 (7/8) Multilayer Chip Baluns For EGSM/Tx & Rx Conformity to RoHS Directive HHM Series HHM76P SHAPES AND DIMENSIONS.6±..55±..±..5±..6±..±..8±. Terminal functions Unbalanced port GND Balanced port 4 Balanced port 5 GND 6 N.C. CIRCUIT DIAGRAM Unbalanced input 5Ω Balanced output Ω RECOMMENDED PC BOARD PATTERNS ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase imbalance at balanced port Amplitude imbalance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 5Ω Ω 88 to 96MHz db min. 8±deg. ±.db.8db max. 4 to +85 C 4 to +85 C 4pieces/reel Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. - / 6 / e75_multibalun_hhm
9 (8/8) FREQUENCY CHARACTERISTICS Unbalance 5Ω /Balance Ω RETURN LOSS Return loss(db) dB 6.6dB 6.4dB AMPLITUDE BALANCE Amplitude balance(db) 5 4.9dB.5dB.dB INSERTION LOSS Insertion loss(db).5..9db.5.8db..5.9db PHASE BALANCE Phase balance(deg.) deg. 8.deg. 8.74deg. - / 6 / e75_multibalun_hhm
Multilayer Balun Transformers
Multilayer Balun Transformers HHM Series Type: HHM58B (..5.95mm) HHM595A (..5.95mm) HHM596A (..5.95mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive
Multilayer Balun Transformers
Multilayer Balun Transformers For 5.GHz W-LAN HHM Series Type: HHM7B (.6.8.6mm) HHM7B (.6.8.6mm) HHM75A (.6.8.6mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with
Multilayer Balun Transformers
Multilayer Balun Transformers HHM Series Type: HHM7J (.6.8.6mm) HHM7E (.6.8.6mm) HHM77D (.6.8.6mm) HHM75E (.6.8.6mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with
Multilayer Balun Transformers
Multilayer Balun Transformers For.4GHz W-LAN/Bluetooth HHM Series Type: HHM57 (..5.95mm) HHM5 (..5.95mm) HHM5 (..5.95mm) HHM54E (..5.95mm) Issue date: December Conformity to RoHS Directive: This means
Wound Chip Baluns. ATB Series. Type: ATB ( mm) ATB ( mm) ATB M (
Wound Chip Baluns ATB Series Type: ATB-5 (...mm) ATB-75 (...mm) ATB-75M (...mm) Issue date: December Conformity to RoHS Directive: This means that, in conformity with EU Directive /95/EC, lead, cadmium,
April Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![April Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/81/83197626.jpg "April Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s April 2015 Multilayer Balun For 1920-2170MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Balun For 1920-2170MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/87/95899776.jpg "June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz
October Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
![October Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]](/thumbs/83/88211263.jpg "October Multilayer Balun. For MHz HHM1908A2. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s October 2017 Multilayer Balun For 4900 5950MHz 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA] Multilayer Balun For 4900 5950MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/86/93522025.jpg "June Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7210A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24 25MHz DEA2245BT-721A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output
DEA211898BT-9033B1. Multilayer Band Pass Filter (Balance Output Type) (2in1) For MHz / MHz. 2.0x1.5mm.
R F C o m p o n e n t s October 5 Multilayer Band Pass Filter (Balance Output Type) (in) For 869-96MHz / 85-5MHz DEA898BT-9B.x.5mm * Dimensions Code JIS Multilayer Band Pass Filter (Balance Output Type)
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded SPM series Type: SPM3012 (3.2x3.0 mm) SPM5030 (5.2x5.0 mm) SPM6530 (7.1x6.5 mm) Issue date: March 2012 Conformity to RoHS Directive: This means
Inductors for Standard Circuits
Inductors for Standard Circuits Multilayer/STD magnetic shielded MLF series Type: MLF05L MLF608 MLF202 05[0402 inch]* 608[0603 inch] 202[0805 inch] * Dimensions Code JIS[EIA] Issue date: November 20 Conformity
Common Mode Choke Coils(Line Filters)
Common Mode Choke Coils(Line Filters) For power line, Closed magnetic circuit core type HF Series Type: Vertical type HF36/HF38 /HF9 For large inductance HF04/HF4/HF430/HF86/HF836/HF3545 Issue date: December
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
TDK CORPORATION NEXT 2 MLK0603
Multilayer Chip Inductors For High-frequency Circuits And Modules, Conforming to RoHS Directive Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium,
ATB series. Balun Transformers. Wound SMD
R F C o m p o n e n t s March 0 Balun Transformers Wound SMD ATB series ATB-70CT (...mm) ATB-70CT (...mm) ATB-70CT (...mm) ATB-00CT (...mm) (/) REMINDERS FOR USING THESE PRODUCTS Before using these products,
Chip Beads(SMD) For Signal Line
(1/8) Chip Beads(SMD) For Signal Line Conformity to ohs Directive MM Series MM168 Type FEATUES Chip bead(impeder), MM series offers 7 construction materials. Size standardized for use by automatic assembly
Common Mode Choke Coils
Common Mode Choke Coils For power line UF series Type: Two sections bobbin type for high frequency UF Issue date: September 0 Conformity to RoHS Directive: This means that, in conformity with EU Directive
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
Model BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
July Balun Transformers. Wound SMD. ATB series. ATB CT ( mm) ATB CT ( mm) ATB CT (
R F C o m p o n e n t s July 0 Balun Transformers Wound SMD ATB series ATB-70CT (...mm) ATB-70CT (...mm) ATB-70CT (...mm) (/) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
Common Mode Choke Coils(Line Filters) for Signal Line UF and TF Series
(/7) Common Mode Choke Coils(Line Filters) for Signal Line UF and TF Series Conformity to RoHS Directive TDK s compact type common mode choke coils are suitable for protecting telephone circuitry from
CE-09 xx Non-insulation type DC-DC converter
CE-9 xx Non-insulation type DC-DC converter Features SMD type Short in height: 4.mm or 4.mm Equipped with variable output voltage (single output type only) Wide range of operating temperature conditions:
Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
RFFM MHz Transmit/Receive Module
925MHz Transmit/Receive Module This module is intended for 868MHz and 915MHz AMR solutions. The FEM provides separate ports for Rx/Tx paths, single-ended Tx and single-ended Rx or Rx differential port,
Model BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Inductors for Power Circuits
Inductors for Power Circuits Radial lead TSL series Type: TSL0709 TSL0808 TSL1112 TSL1315 Issue date: September 2011 Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC,
LTS(3-terminal type self-oscillation formula) series TSP(2-terminal type separate excitation oscillation formula) series
Powder Level s Piezoelectric type LTS(3-terminal type self-oscillation formula) series TSP(2-terminal type separate excitation oscillation formula) series Issue date: February 2012 Conformity to RoHS Directive:
August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/83/87790005.jpg "August Multilayer Band Pass Filter. For MHz DEA202450BT-1294C1-H. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s August 2016 Multilayer Band Pass Filter For 2412-2484MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 2412-2484MHz Conformity to RoHS Directive
2.4 GHz ISM Band Working Frequency
RFBLN 2012 (0805) Series RoHS Compliance MULTILAYER CERAMIC BALUN TRANSFORMER Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBLN2012090A1T *Contents in this sheet are subject to change
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS)
MEMO/08/763 Brussels, 3 December 2008 Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS) What is RoHS about? The
Discover TDK Solutions
Discover TDK Solutions RF Components for Wireless Applications TDK RF Components & Services : Band Pass Filters Diplexers Low Pass Filters Couplers High Inductors Circulators/ Isolators Baluns Antennas
Model X3DC18E2S Rev B
b Doherty Combiner Description The X3DC18E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC18E2S is designed particularly
Thin-Film Directional Couplers
DB6N 9 Couplers GENERAL DESCRIPTION RFAP TECHNOLOGY The DB6N 9 Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and
3.0 GHz DIVIDE BY 4 PRESCALER
. GHz DIVIDE BY PRESCALER UPB5GV FEATURES TEST CIRCUIT HIGH FREUENCY OPERATION TO GHz FIXED DIVIDE RATIO: LOW CURRENT CONSUMPTION: 5 ma at 5 V SMALL PACKAGE: 8 PIN SSOP AVAILABLE IN TAPE AND REEL Power
FEU (Front End Unit) for Optic Repeater
FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz
RF V to 4.2V, 2.4GHz Front End Module
3.0V to 4.2V, 2.4GHz Front End Module Package Style: QFN, 20-Pin, 3.5mm x 3.5mm x 0.5mm TXCT _BAIS GND NC 15 14 13 12 11 Features TX Output Power: 23dBm TX Gain: 28dB RX Gain: 11.5dB RX NF: 3dB Integrated
Johanson Technology, Inc. 2450BM14A0002 Matched Balun for the Nordic nrf24l01/nrf24l01+ Chipsets. November 2009
Johanson Technology, Inc. 2450BM14A0002 Matched Balun for the Nordic nrf24l01/nrf24l01+ Chipsets November 2009 1. Introduction The nrf24l01/nrf24l01+ from Nordic Semiconductor is a 2.45GHz one chip, ultra
5 V, SUPER MINIMOLD WIDEBAND SI RFIC AMPLIFIER
V, SUPER MINIMOLD WIDEBAND SI RFIC AMPLIFIER UPC278TB FEATURES GAIN vs. FREQUENCYand TEMPERATURE HIGH DENSITY SURFACE MOUNTING: pin super minimold or SOT-33 package HIGH GAIN: 1 db TYP SATURATED OUTPUT
RKE SERIES Single phase input / single output 1500W
RKE SERIES Single phase input / single output 1500W 5 Features Ultracompact highcapacity frontend power supply Meeting the standards for the harmonics current limiter Complying with the semiconductorprocess
NEC's NPN SiGe RF TRANSISTOR FOR MEDIUM OUTPUT POWER AMPLIFICATION (800 mw) 3-PIN POWER MINIMOLD (34 PACKAGE)
NEC's NPN SiGe RF TRANSISTOR FOR MEDIUM OUTPUT POWER AMPLIFICATION (8 mw) 3-PIN POWER MINIMOLD (34 PACKAGE) FEATURES THIS PRODUCT IS SUITABLE FOR MEDIUM OUTPUT POWER (8 mw) AMPLIFICATION PO = 29 dbm TYP.
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
5 V AGC AMPLIFIER + VIDEO AMPLIFIER
5 V AGC AMPLIFIER + VIDEO AMPLIFIER UPC327GV UPC328GV FEATURES ON-CHIP LOW DISTORTION AMPLIFIER: IIP3 = -4 dbm at minimuim gain WIDE AGC DYNAMIC RANGE: GCR = 53 db TYP ON-CHIP VIDEO AMPLIFIER: VOUT =.25
June Multilayer Low Pass Filter. For MHz DEA070960LT-4006B x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]
![June Multilayer Low Pass Filter. For MHz DEA070960LT-4006B x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]](/thumbs/86/94114379.jpg "June Multilayer Low Pass Filter. For MHz DEA070960LT-4006B x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 824-960MHz 0.65x0.5mm [EIA 0202]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 824-960MHz Conformity to RoHS Directive SHAPES
Agilent 1GG Packaged 13.5 GHz GaAs Diode Limiter
Agilent 1GG5-8205 Packaged GaAs Diode Limiter TC626P Data Sheet Features ESD Protection: 3000V Human Body Model Insertion Loss: 1.0 db Typ. Port Match: S 11 and S 22 15 db Typ. Power Handling: P 1dB 25
ZWD100PAF. Conformity to RoHS Directive
SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
ZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
RF2436 TRANSMIT/RECEIVE SWITCH
Transmit/Receive Switch RF2436 TRANSMIT/RECEIVE SWITCH Package Style: SOT-5 Features Single Positive Power Supply Low Current Consumption db Insertion Loss at 900MHz 24dB Crosstalk Isolation at 900MHz
Gap : 3mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter
GP1S50J0000F Gap : 3mm, Slit : 0.5mm Phototransistor Output, Case package Transmissive Photointerrupter Description GP1S50J0000F is a standard, phototransistor output, transmissive photointerrupter with
Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
AxCent Servo Drive A25A100
Description Power Range The A25A100 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
Typical Performance Data
Ceramic Balun RF Transformer 50Ω 720 to 1600 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Input RF Power*** 3W **Derate linearly to 2.5W at 100 C Permanent
3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER
3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER UPC277TB FEATURES HIGH GAIN: 2 db at 9 to MHz Typical HIGH OUTPUT POWER: PSAT = +2. dbm at 9 MHz + dbm at MHz LOW BIAS VOLTAGE: 3. V Typical, 2.7 V Minimum
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
June Multilayer Low Pass Filter. For MHz DEA161990LT-1182A8
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 1710-1990MHz Multilayer Low Pass Filter For 1710-1990MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS [Top view] 1.60±0.15 (2) 0.80±0.10
Sub-Miniature Cable. Specifications: Page <1> 05/04/12 V1.1
: Sub-miniature cable, 7-1-2C, to Def Stan 61-12 (Part 4) : 0.055 mm 2 (7/0.1 mm) tinned annealed copper wires to BS 6360 (as far as applicable), class 5 : Number of wires = 7 : Maximum resistance at 20
Features. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
TPX205950MT-7010A1. Multilayer Triplexer. For MHz / MHz / MHz. 2.0x1.25mm [EIA 0805]* August 2016
![TPX205950MT-7010A1. Multilayer Triplexer. For MHz / MHz / MHz. 2.0x1.25mm [EIA 0805]* August 2016](/thumbs/81/84143597.jpg "TPX205950MT-7010A1. Multilayer Triplexer. For MHz / MHz / MHz. 2.0x1.25mm [EIA 0805]* August 2016")
R F C o m p o n e n t s August 216 Multilayer Triplexer For 156-166MHz / 24-25MHz / 49-595MHz TPX2595MT-71A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Triplexer For 156-166MHz / 24-25MHz
September Multilayer Diplexer. For MHz / MHz DPX105950DT-6012A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]
![September Multilayer Diplexer. For MHz / MHz DPX105950DT-6012A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]](/thumbs/82/86818293.jpg "September Multilayer Diplexer. For MHz / MHz DPX105950DT-6012A1. 1.0x0.5mm [EIA 0402]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s September 16 Multilayer Diplexer For 2-MHz / 49-59MHz DPX59DT-612A1 1.x.5mm [EIA 2]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 2-MHz / 49-59MHz Conformity to RoHS Directive
Model X3DC07E2S. Doherty Combiner. Mechanical Outline
b Model X3DC7E2S Doherty Combiner Description The X3DC7E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC7E2S is designed
Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver
(ANN-2005) Rev B Page 1 of 13 Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver Trong N Duong RF Co-Op Nithya R Subramanian RF Engineer Introduction The tradeoff
RF V TO 4.2V, 2.4GHz FRONT END MODULE
3.V TO 4.2V, 2.4GHz FRONT END MODULE Package Style: QFN, 2-Pin, 3.5mmx3.5mmx.5mm TXCT GND VCC_BAIS VCC NC 15 14 13 12 11 Features TX Output Power: 22dBm RX Gain: 11.5dB RX NF: 2.5dB Integrated RF Front
L, S-BAND SPDT SWITCH
DESCRIPTION The µpg8tk is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed for mobile phone and another L, S-band application. This device can operate control switching
Development of Small-Capacity UPS "SANUPS A11G-Ni"
New Products Introduction Development of Small-Capacity UPS "SANUPS A11G-Ni" Yutaka Kamakura Hitoshi Yoshiike Hideaki Miyajima Hideaki Matsuo Hidenori Takizawa 1. Introduction 2. Background to development
Type QG-G50-2C- M-BU
Page 1/6 Specification for Optical Fiber Cable Assemblies for CC-Link IE Controller network Type QG-G50-2C- M-BU MITSUBISHI ELECTRIC SYSTEM & SERVICE CO.,LTD Note Revision Drawn Check Design Approved Kariya
October Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![October Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/91/106422637.jpg "October Multilayer Band Pass Filter. For MHz DEA205425BT-2190E1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s October 2017 Multilayer Band Pass Filter For 4920 5950MHz 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4920 5950MHz Conformity to RoHS Directive
March Multilayer Diplexer. For MHz / MHz DPX202170DT-4049A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![March Multilayer Diplexer. For MHz / MHz DPX202170DT-4049A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/82/85702642.jpg "March Multilayer Diplexer. For MHz / MHz DPX202170DT-4049A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s March 17 Multilayer Diplexer For 824-96MHz / 171-217MHz DPX217DT-449A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 824-96MHz / 171-217MHz Conformity to
AM3089 Filter Bank. Description. Functional Diagram. Features. Characteristic Performance. Analog Tunable 2.0 to 18.0 GHz Bandpass
Insertion Loss (db) AM3089 Filter Bank Description AM3089 is an analog voltage-tunable bandpass filter bank covering the 2.0 to 18.0 GHz frequency range. Six bandpass filters with SP6T switches on the
3 V SUPER MINIMOLD L-BAND SI MMIC DOWNCONVERTER
V SUPER MINIMOLD L-BAND SI MMIC DOWNCONVERTER FEATURES HIGH DENSITY SURFACE MOUNTING: Pin Super Minimold or SOT- package WIDE BAND OPERATION: RF =. to. GHz IF = to MHz ON BOARD OSCILLATOR SUPPLY VOLTAGE:
250 MHz QAM IF DOWNCONVERTER UPC2798GR
25 MHz QAM IF DOWNCONVERTER UPC2798GR FEATURES RF/LO FREQUENCY RANGE: 3-25 MHz ON CHIP VCO LOW DISTORTION AGC AMPLIFIER: -9 dbm IIP3 @ MIN Gain ON CHIP VIDEO AMP: 3. Vp-p () SMALL 2 PIN SSOP PACKAGE AVAILABLE
July Multilayer Diplexer. For MHz / MHz DPX165950DT-8126A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![July Multilayer Diplexer. For MHz / MHz DPX165950DT-8126A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/85/91663949.jpg "July Multilayer Diplexer. For MHz / MHz DPX165950DT-8126A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s July 15 Multilayer Diplexer For -2496MHz / 49-59MHz DPX1659DT-8126A1 1.6x.8mm [EIA 63]* * Dimensions Code JIS[EIA] Multilayer Diplexer For -2496MHz / 49-59MHz Conformity to RoHS
High Frequency Ceramic Solutions
Page 1 of 5 General Specifications Part Number Frequency (MHz) Unbalanced Impedance Differential Balanced Impedance 2450BM15B0002 2400-2500 50 Ω Conjugate match to TI Chipset 2520 Differential Mode Attenuation
RFFM V to 4.0V, 450MHz to 470MHz Transmit/Receive Front End Module
.V to.0v, 0MHz to 0MHz Transmit/Receive Front End Module Package Style: LGA, 8-Pin,.mm x.0mm NC 8 Features Tx Output Power: 0dBm Tx Gain: 0dB Separate 0Ω Tx/Rx Transceiver Interface Rx Insertion Loss:
0.5-4 GHz 6-Bit Digital Attenuator
.5-4 GHz 6-Bit Digital Attenuator Features Frequency Range :.5 to 4 GHz 31.5dB Attenuation Range.5dB resolution 4.5 db Insertion loss max. +.4dB Attenuation Error 5Ω Impedance 1 Typical Phase variation.2
Add-on modules DX 3 63A for MCBs DX 3 1,5 modules per pole
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Add-on modules DX 3 63A for MCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4.
Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
July Multilayer Diplexer. For MHz / MHz DPX205950DT-9108A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
![July Multilayer Diplexer. For MHz / MHz DPX205950DT-9108A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]](/thumbs/77/76227594.jpg "July Multilayer Diplexer. For MHz / MHz DPX205950DT-9108A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s July 215 Multilayer Diplexer For 2-2MHz / 49-59MHz DPX259DT-918A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 2-2MHz / 49-59MHz DPX259DT-918A1 Conformity
Materials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 178-025-613R571 0.03540 Environment
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
915MHz Transmit/Receive Module
RF6599 915MHz Transmit/Receive Module This module is intended for 915MHz AMR solutions. It provides separate ports for Rx and Tx paths and two ports on the output for connecting a diversity solution or
June Multilayer Low Pass Filter. For MHz DEA160710LT-5023B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![June Multilayer Low Pass Filter. For MHz DEA160710LT-5023B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/85/91341795.jpg "June Multilayer Low Pass Filter. For MHz DEA160710LT-5023B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 2015 Multilayer Low Pass Filter For 470-770MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Low Pass Filter For 470-770MHz Conformity to RoHS Directive SHAPES
July Multilayer Band Pass Filter. For MHz DEA165363BT-2124A3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![July Multilayer Band Pass Filter. For MHz DEA165363BT-2124A3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/86/93201016.jpg "July Multilayer Band Pass Filter. For MHz DEA165363BT-2124A3. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s July 2015 Multilayer Band Pass Filter For 4900-5825MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4900-5825MHz Conformity to RoHS Directive
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2 0 0 2 / 9 5 / E C r e q u i r e m e n t restricting the use of Lead (Pb), Mercury (Hg),
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
June Multilayer Band Pass Filter. For MHz DEA165375BT-2122A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
![June Multilayer Band Pass Filter. For MHz DEA165375BT-2122A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]](/thumbs/96/128240000.jpg "June Multilayer Band Pass Filter. For MHz DEA165375BT-2122A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]")
R F C o m p o n e n t s June 2015 Multilayer Band Pass Filter For 4900 5850MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter For 4900 5850MHz Conformity to RoHS Directive
High Frequency Ceramic Solutions
Page 1 of 6 Do you need a small sub-ghz or 2.4GHz antenna? Go to: /antennas General Specifications Part Number 9PC15A36 Frequency (MHz) 862-928 24-25 Insertion Loss (db) 1.8 typ (2. max.) 1.3 typ (1.6
Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
DISCONTINUED. California Eastern Laboratories NX8564LE NX8565LE NX8566LE SERIES
FEATURES NEC's EA MODULATOR INTEGRATED InGaAsP MQW DFB LASER DIODE MODULE FOR 2.5 Gb/s ULTRALONG-REACH 360, 600, 240 km DWDM APPLICATIONS INTEGRATED ELECTROABSORPTION MODULATOR VERY LOW DISPERSION PENALTY:
INDEX ORDERING CODE...1~4 CHIP ANTENNA...5~11 HIGH FREQUENCY MULTILAYER BAND PASS FILTER...12~18 HIGH FREQUENCY MULTILAYER BALANCED FILTER...
Table of Contents www.passivecomponent.com INDEX Subject Page ORDERING CODE...1~4 CHIP ANTENNA...5~11 HIGH FREQUENCY MULTILAYER BAND PASS FILTER...12~18 HIGH FREQUENCY MULTILAYER BALANCED FILTER...19~23
3V OPERATION SILICON LDMOSFET RF POWER AMPLIFIER INTEGRATED CIRCUIT FOR 1.9 GHz PHS AND 2.4 GHz APPLICATIONS
DESCRIPTION The µpd572tu is a silicon laterally diffused (LD) MOSFET IC designed for use as power amplifier 1.9 GHz PHS and 2.4 GHz applications. This IC consists of two stage amplifiers. The device is
Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 214. All of the contents specified herein are
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
NEC's NPN SILICON TRANSISTOR. ñ EIAJ 1 REGISTERED NUMBER PACKAGE OUTLINE
FEATURES NEW MINIATURE M PACKAGE: Small transistor outline. X. X. mm Low profile /. mm package height Flat lead style for better RF performance HIGH GAIN BANDWIDTH PRODUCT: ft = GHz LOW NOISE FIGURE: =.