Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, CA Phone (800) , (626) Fax: (626)

Transcription

1 Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, CA Phone (800) , (626) Fax: (626)

2 About Standard Crystal Corporation The company has been in business since It occupies a modern 12,400 sq. ft. Plant (build in 1977) designed expressly for the manufacture of crystal and oscillator products. It is located in the city of El Monte which is located in Los Angeles County. The is located adjacent to Interstate 10, also known as the San Bernadino Freeway. In 1993 we added the capability of manufacturing products in China. This gives us the advantage of both large and small volume production to support all our customer needs. The most modern and sophisticated equipment is used to efficiently and accurately test and manufacture each crystal and hybrid oscillator. All crystal and oscillator designs have been computerized to minimize error. Our company also has application assistance and research and development capabilities available for in-house and customer use. We are continually improving quality and expanding our product lines to meet the needs of our customers. Information furnished by Standard Crystal Corporation is believed to be accurate and reliable. However, no responsibility is assumed by Standard Crystal Corporation for it use, nor for any infringements of patents or other rights of third parties which may result from its use. stdxtl@pacblell.net

3 TABLE OF CONTENTS OSCILLATORS PAGE OSCILLATOR QUICK SELECTOR GUIDE... A-1 ~ A-3 HCMOS/TTL 5X7 CERAMIC SMD... O-1 HCMOS/TTL FULL SIZE... O-2 HCMOS/TTL HALF SIZE... O-3 TTL FULL SIZE... O-4 TTL HALF SIZE... O-5 FAST TTL FULL SIZE... O-6 VCXO 5X7 CERAMIC SMD 6 PAD... O-7 VCXO FULL SIZE... O-8 VCXO HALF SIZE... O-9 ECL FULL SIZE... O-10 ECL HALF SIZE... O-11 DTCXO FULL SIZE... O-12 TCXO FULL SIZE... O-13 TCXO 7X9 CERAMIC SMD 4 PAD... O-14 TC & VCXO FULL SIZE SMD... O-15 VTCXO 9X11 CERAMIC SMD 4 PAD... O-16 VTCXO 9X11 CERAMIC SMD 6 PAD... O-17 VTCXO 3X5 CERAMIC SMD 4 PAD... O-18 VTCXO 7X9 CERAMIC SMD 4 PAD... O-19 VTCXO 3X6 CERAMIC SMD 4 PAD... O-20 CRYSTALS PAGE CRYSTAL QUICK SELECTOR GUIDE... A-4 & A-5 HC49U... C-1 HC49US & HC49USS (LOW PROFILE)...C-2 HC49UP & HC49UPS (LOW PROFILE SMD)...C-3 5X7 CERAMIC SMD 2 PAD & 4 PAD... C-4 6X3 CERAMIC SMD 2 PAD & 4 PAD... C-5 5X3 CERAMIC SMD 2 PAD & 4 PAD... C-6 UM-1... C-7 UM-5... C-8 UM-4... C-9 TO-5... C-10 HC51U & HC6U... C-11 3X9 CYLINDRICAL... C-12

4 STANDARD CRYSTAL CORP. OSCILLATOR QUICK SELECTOR GUIDE HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Pin #1 & Symmetry Frequency page O-1 5 x 7.5 x 1.6 Max. HCMOS 5x7mm 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) /TTL SMD 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% x 0.29 x 0.07 Symmetry Part Number CH 5 1 A 0D AD 40M00000 HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 20.8 x 13.2 x 5.1 HCMOS Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) /TTL 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.82 x 0.52 x 0.20 Symmetry page O-2 Part Number CH 1 1 A 0D AD 40M00000 HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 20.8 x 13.2 x 5.1 HCMOS Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) /TTL GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.82 x 0.52 x 0.20 Symmetry page O-2 Part Number CH 3 1 A 0D AD 40M00000 HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 13.2 x 13.4 x 5.08 HCMOS Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) /TTL 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.52 x 0.52 x 0.20 Symmetry page O-3 Part Number CH 2 1 A 0D AD 40M00000 HCMOS Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 13.2 x 13.4 x 5.08 HCMOS Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) /TTL GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.52 x 0.52 x 0.20 Symmetry page O-3 Part Number CH 4 1 A 0D AD 40M00000 TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 20.8 x 13.2 x 5.1 TTL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.82 x 0.52 x 0.20 Symmetry page O-4 Part Number T 1 1 A 0D AD 40M00000 TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 20.8 x 13.2 x 5.1 TTL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.82 x 0.52 x 0.20 Symmetry page O-4 Part Number T 3 1 A 0D AD 40M00000 TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency page O x 13.4 x 5.08 TTL Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.52 x 0.52 x 0.20 Symmetry Part Number T 2 1 A 0D AD 40M00000 TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 13.2 x 13.4 x 5.08 TTL Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.52 x 0.52 x 0.20 Symmetry page O-5 Part Number T 4 1 A 0D AD 40M00000 A-1

5 STANDARD CRYSTAL CORP. OSCILLATOR QUICK SELECTOR GUIDE FAST TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 20.8 x 13.2 x 5.1 FAST Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) TTL 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.82 x 0.52 x 0.20 Symmetry page O-6 Part Number TF 1 1 A 0D AD 40M00000 FAST TTL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Options Frequency 20.8 x 13.2 x 5.1 FAST Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm A=Pin #1 Enable Hi (MHz) TTL GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm D=45/55% 0.82 x 0.52 x 0.20 Symmetry page O-6 Part Number TF 3 1 A 0D AD 40M00000 VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability 5.2 x 7.5 x 1.8 Max. VCXO 5 x 7 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max. SMD 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max x 0.20 x 0.07 page O-7 Part Number V 5 1 A 0D 40M00000 A VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability 20.8 x 13.2 x 5.1 VCXO Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max. 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max x 0.52 x 0.20 page O-8 Part Number V 1 1 A 0D 40M00000 A VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability 20.8 x 13.2 x 5.1 VCXO Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max. GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max x 0.52 x 0.20 page O-8 Part Number V 3 1 A 0D 40M00000 A VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability 20.8 x 13.2 x 5.1 VCXO Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max. 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max x 0.52 x 0.20 page O-9 Part Number V 2 1 A 0D 40M00000 A VCXO Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Max. Pullability 13.2 x 13.4 x 5.08 VCXO Half Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) A=±100ppm Max. GullWing 3= 3.3V B= -40E to 85EC 1D= ±50ppm B=±50ppm Max x 0.52 x 0.20 page O-9 Part Number V 4 1 A 0D 40M00000 A ECL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Pin Configurations 20.8 x 13.2 x 5.1 ECL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) please see page 10 B= -40E to 85EC 1D= ±50ppm 0.82 x 0.52 x 0.20 page O-10 Part Number E 1 1 A 0D 40M00000 AC ECL Dimensions mm/inch Family Package Voltage Temp. Range Freq. Tolerance Frequency Pin Configurations 20.8 x 13.2 x 5.1 ECL Full Size 1= 5V A= 0E to 70EC 0D= ±100ppm (MHz) please see page 10 GullWing B= -40E to 85EC 1D= ±50ppm 0.82 x 0.52 x 0.20 page O-10 Part Number E 3 1 A 0D 40M00000 AC A-2

6 STANDARD CRYSTAL CORP. OSCILLATOR QUICK ELECTOR GUIDE DTCXO Dimensions mm/inch Family Package Voltage Temp. Range Output Wave Frequency Freq. Stability 15 x 25 x 14 DTCXO Thru-Hole 5V A= 0E to 70EC H=CMOS & TTL (MHz) ±1.0~±0.3ppm B= -20E to 70EC S=Sine Wave 0.59 x 0.98 x 0.55 page O-12 Part Number DTC 1525T A H 12M DTCXO Dimensions mm/inch Family Package Voltage Temp. Range Output Wave Frequency Freq. Stability 12.6 x 18.6 x 10 TCXO Thru-Hole 5V A= 0E to 60EC H=CMOS & TTL (MHz) ±10.0~±0.3ppm B= -20E to 70EC S=Sine Wave 0.49 x 0.73 x 0.40 page O-13 Part Number TC 1218T A H 12M TCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability 7.0 x 9.0 x 2.0 TCXO 7x9 SMD 3V -20E to 75EC [10k Ohms/10pF]±10% (MHz) see Page O-14 4 pad 0.28 x 0.36 x 0.08 page O-14 Part Number TC M TC & VCXO Dimensions mm/inch Family/ Package Freq. Stability Temp. Range Output Load Freq. Deviation Frequency 7.62 x 18.3 x 4.5 TC & VCXO See Table See Table C= CMOS/ TTL Blank= TCXO (Mhz) 14 Pin SMD Page O-15 Page O-15 Compatible 5 = ±5ppm 5Vdc (2 digit code) (1 letter code) S= Clipped Sinewave 10= ±10ppm 0.3 x 0.72 x 0.18 page O-15 Part Number TVCFS 25 C S 10 12M28800 VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability page O x 11.4 x 2.3 VTCXO 9x11 SMD 3V -30E to 75EC 10k Ohms/10pF (MHz) see Page O-16 4 pad 0.38 x 0.45 x 0.09 Part Number VTC M VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability 9.6 x 11.4 x 2.3 VTCXO 9x11 SMD 3V -30E to 75EC 10k Ohms/10pF (MHz) see Page O-17 6 pad 0.38 x 0.45 x 0.09 page O-17 Part Number VTC M VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability 3.2 x 5.0 x 1.5 VTCXO 3x5 SMD 3V - 20E to 75EC [10k Ohms/10pF]±10% (MHz) see Page O-18 4 pad 0.13 x 0.20 x 0.06 page O-18 Part Number VTC M VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Freq. Stability Output Load Frequency page O x 9.0 x 2.0 VTCXO 7x9 SMD 3V - 20E to 75EC 2.5= ±2.5ppm [10k Ohms/10pF]±10% (MHz) 4 pad 5 = ±5ppm 0.28 x 0.35 x 0.08 Part Number VTC M VTCXO SMD Dimensions mm/inch Family Package Voltage Temp. Range Output Load Frequency Freq. Stability 3.5 x 6.0 x 1.7 VTCXO 3x6 SMD 3V - 30E to 80EC 10pF/ 10k Ohms (MHz) ±2.5ppm 4 pad see Page O x 0.24 x 0.07 page O-20 Part Number VTC M A-3

7 OSCILLATORS ENVIRONMENTAL S TEMPERATURE CYCLE: SHOCK: VIBRATION: HUMIDITY: MECHANICAL: BEND TEST: MARKING INK: ±50PPM Max. 0 to 120EC, 3 Cycles, 2 Hrx. Max. each, 25 ±2EC ref. 100G S 0.10 millisec, ½ sinewave; 3 shocks each plane. 10Hz to 55Hz, 0.060" D.A., 55Hz to 2000Hz 35G S Duration Hours. 95% Relative +85EC, 250 Hours. Hermetically sealed package. Pins will withstand maximum bend of 90E reference to base for 2 bends. Epoxy, heat cured. SOLVENT RESISTANCE: Isopropyl alcohol, Trichloromethane, Freon, TMC. No marking or seal destruction. Dipped 1 +25EC ±5EC in Solvent. SOLDERABILITY: Each wire lead terminal shall be solderable when tested as specified in Method 208 of MIL-STD-202. NOTE: (1) Unit can be cleaned by only type of the solvents listed. NOTE: (2) Ultrasonic degreaser no to be used.

8 OSCILLATOR REQUEST FOR QUOTE SHEET Your Company Name: Your Name:, Phone : Fax:, Address: Quantity:, Delivery: Part Number: Example: CH11A0DA20M Family: (TTL, HCMOS, VCXO, Etc.) Frequency: MHz or KHz Supply Voltage (Vdd): (5V, 3.3V) Frequency Tolerance: ± Frequency Stability: ± Operating Temperature Range Operating Temperature Range: from EC to EC Package Type: (Full Size, Half Size, 5x7 SMD, Etc.) Tri State/ Enable Hi: Symmetry: (40/60%, 45/55% Duty Cycle) Pin Connections (ECL Only): (AA, AC, ACE, Etc.) Frequency Pullability (VCXO Only): PPM Min. Special Instructions:

9 HCMOS/TTL MINIATURE SMD OSCILLATOR 5x7mm SURFACE MOUNT Storage Temperature Range Operating Temperature Range MHz to MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC Input Voltage 5Vdc ± 0.5V 3.3Vdc ± 0.3V Max. Input Current 5-80 ma Logic 1" / 0" 90% Vdd Min. / 10% Vdd Max. Output Symmetry Output Rise / Fall Time 45 / ½ V p-p 100Sec. Max. Output Load 10TTL Gates/ 50pF HCMOS 10LS TTL/ 15pF Max. Options on Pin 1 1" = Enable, 0" = Disable N/C = No Connection Dimensions in mm Pin Connections #1 Enable Hi #2 Ground Note: External 0.01FF capacitor #3 Output #4 VDD required between pins 4 and 2 HCMOS 5x7 SMD Part Number Break Down CH 5 1 A 0 D A 20M (Frequency) Supply Voltage Temp. Range Tolerance/ Stability Tri State Enable Hi 1= 5Vdc A= 0 to 70EC 0= ±100 PPM (Standard) 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM 4= ±25 PPM O-1

10 HCMOS/ TTL FULL SIZE FEATURES! CMOS and TTL compatible! Tri-State option available! Selection of thru-hole or gull wing! 14 pin dip OSCILLATOR THRU HOLE AND GULL WING SMD S Storage Temperature Range Operating Temperature Range 1MHz to 150MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC Input Voltage 5V±0.5V or 3.3V 0.3V Max. Input Current Logic 1" / 0" Output Symmetry Output Rise / Fall Time Output Load Options on Pin 1 Dimensions in inches 5-80 ma 90% Vdd Min. / 10% Vdd Max. 60 / ½ V p-p 100Sec. Max. CMOS C = 15pF or 10TTL Gates 1" = Enable, 0" = Disable N/C = No Connection FULL SIZE FULL SIZE GULL WING HCMOS Full Size Thur Hole Part Number Break Down CH 1 1 A 0 D A - Frequency Package Supply Voltage Temp. Range Tolerance/ Stability Options 1= Full Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard 3= Full Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi Gull Wing 4= ±25 PPM D= Tight Symmetry 45/55% O-2

11 FEATURES! CMOS and TTL compatible! Tri-State option available! Selection of thru-hole or gull wing! 8 pin dip HCMOS/ TTL HALF SIZE OSCILLATOR THRU HOLE AND GULL WING SMD S Storage Temperature Range Operating Temperature Range Input Voltage Max. Input Current Logic 1" / 0" Output Symmetry Output Rise / Fall Time Output Load Options on Pin 1 Dimensions in inches 1MHz to 150MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC 5V±0.5V or 3.3V±0.3V 5-80 ma 90% Vdd Min. / 10% Vdd Max. 60 / ½ V p-p 100Sec. Max. CMOS C = 15pF or 10TTL Gates 1" = Enable, 0" = Disable N/C = No Connection HALF SIZE HALF SIZE GULL WING HCMOS Half Size Thur Hole Part Number Break Down CH 2 1 A 0 D A - Frequency Package Supply Voltage Temp. Range Tolerance/ Stability Options 2= Halfl Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard 4= Half Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi Gull Wing 4= ±25 PPM D= Tight Symmetry 45/55% O-3

12 TTL FULL SIZE FEATURES! Drive 1 to 10 TTL loads.! Tri-State option available! Selection of thru-hole or gull wing! 14 pin dip OSCILLATOR THRU HOLE AND GULL WING SMD S Storage Temperature Range Operating Temperature Range Input Voltage Max. Input Current 25MHz to 65MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC 5V±0.5V or 3.3V±0.3V 90 ma 1" / 0" Level 0.4V Max. / 2.4V Min. Output Symmetry Output Rise / Fall Time Output Load Options on Pin 1 Dimensions in inches 60 / ½ V p-p 150Sec. Max. 1 to 10 TTL Loads 1" = Enable, 0" = Disable N/C = No Connection FULL SIZE FULL SIZE GULL WING TTL Full Size Thur Hole Part Number Break Down T 1 1 A 0 D A - Frequency Package Supply Voltage Temp. Range Tolerance/ Stability Options 1= Fulll Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard 3= Full Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi Gull Wing 4= ±25 PPM D= Tight Symmetry 45/55% O-4

13 TTL HALF SIZE FEATURES! Drive 1 to 10 TTL loads! Tri-State option available! Selection of thru-hole or gull wing! 8 pin dip OSCILLATOR THRU HOLE AND GULL WING SMD S Storage Temperature Range Operating Temperature Range Input Voltage Max. Input Current 25MHz to 65MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC 5V±0.5V or 3.3V±0.3V 90 ma 1" / 0" Level 0.4V Max. / 2.4V Min. Output Symmetry Output Rise / Fall Time Output Load Options on Pin 1 Dimensions in inches 60 / ½ V p-p 150Sec. Max. 1 to 10 TTL Loads 1" = Enable, 0" = Disable N/C = No Connection HALF SIZE HALF SIZE GULL WING TTL Half Size Thur Hole Part Number Break Down T 2 1 A 0 D A - Frequency Package Supply Voltage Temp. Range Tolerance/ Stability Options 2= Halfl Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard 4= Half Size 3= 3.3Vdc B= -40 to 85EC 1= ±50 PPM A= TS Enable Hi Gull Wing 4= ±25 PPM D= Tight Symmetry 45/55% O-5

14 FAST TTL FULL SIZE FEATURES! Drive 1 to 10 LS TTL loads.! Selection of thru-hole or gull wing! 14 pin dip OSCILLATOR THRU HOLE AND GULL WING SMD S Storage Temperature Range Operating Temperature Range Input Voltage Max. Input Current 60MHz to 110MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC 5V±0.5V 80 ma 1" / 0" Level 0.5V Max. / 2.4V Min. Output Symmetry Output Rise / Fall Time Output Load Options on Pin 1 Dimensions in inches 60 / ½ V p-p 70Sec. Max. 1 to 10 LS TTL Loads 1" = Enable, 0" = Disable N/C = No Connection FULL SIZE FULL SIZE GULL WING FAST TTL Full Size Thur Hole Part Number Break Down TF 1 1 A 0 D A - Frequency Package Supply Voltage Temp. Range Tolerance/ Stability Options 1= Fulll Size 1= 5Vdc A= 0 to 70EC 0= ±100 PPM Blank= Standard 3= Full Size B= -40 to 85EC 1= ±50 PPM D= Tight Symmetry Gull Wing 4= ±25 PPM 45/55 % O-6

15 VCXO 5x7 Surface Mount VOLTAGE CONTROLLED CRYSTAL OSCILLATORS Storage Temperature Range Operating Temperature Range 8MHz to 36MHz -50EC to 125EC 0EC to 70EC or -40EC to 85EC Input Voltage +5V ± 0.5V +3.3V ± 0.3V Frequency Control +0.5V to +4.5V +0.3V to +3.0V Frequency Deviation ± 80ppm Min. ± 100ppm Min. Control Voltage 2.5 ± 2.0V 1.65 ± 1.5V Input Current 30mA Max. 20mA Max. Output Rise / Fall Time, Output Symmetry 80 Sec. Max., 40 / 60% Output Load 15pF Dimensions in mm Recommended Pad Layout VCXO 5x7 SMD Part Number Break Down V 5 1 A 0D - 20M A Holder Size Supply Voltage Temp. Range Tolerence/ Stability Pullability 5= 5x7 SMD 1= 5Vdc A= 0 to 70EC 0D= ±100 PPM A= 200 PPM Max. 3= 3.3Vdc B= -40 to 85EC 1D= ±50 PPM O-7

16 VCXO FULL SIZE VOLTAGE CONTROLLED CRYSTAL OSCILLATORS Storage Temperature Range Operating Temperature Range 1MHz to 80MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC Input Voltage +5V ± 0.5V or +3.3V ± 0.3V Frequency Control +0.5V to +4.5V Frequency Deviation Sensitivity 60 PPM / Volt at V control = +2V to +3V Frequency Nominal Sensitivity V control = +2.5V ± 0.05V Output Symmetry Output Rise / Fall Time Output Load 40 / 1.4V Level 150Sec. (0.4 to 2.4 Levels) 10 TTL, CMOS Compatible Dimensions in inches FULL SIZE FULL SIZE GULL WING VCXO Full Size Part Number Break Down V 1 1 A 0D - 20M A Holder Size Supply Voltage Temp. Range Tolerence/ Stability Pullability 1= Full Size 1= 5Vdc A= 0 to 70EC 0D= ±100 PPM A= 200 PPM Max. 3= Full Size 3= 3.3Vdc B= -40 to 85EC 1D= ±50 PPM Gull Wing O-8

17 VCXO HALF SIZE VOLTAGE CONTROLLED CRYSTAL OSCILLATORS Storage Temperature Range Operating Temperature Range 1MHz to 80MHz -55EC to 125EC 0EC to 70EC or -40EC to 85EC Input Voltage +5V ± 0.5V or +3.3V ± 0.3V Frequency Control +0.5V to +4.5V Frequency Deviation Sensitivity 60 PPM / Volt at V control = +2V to +3V Frequency Nominal Sensitivity V control = +2.5V ± 0.05V Output Symmetry Output Rise / Fall Time Output Load 40 / 1.4V Level 150Sec. (0.4 to 2.4 Levels) 10 TTL, CMOS Compatible Dimensions in inches HALF SIZE HALF SIZE GULL WING VCXO Half Size Part Number Break Down V 2 1 A 0D - 20M A Holder Size Supply Voltage Temp. Range Tolerence/ Stability Pullability 2= Half Size 1= 5Vdc A= 0 to 70EC 0D= ±100 PPM A= 200 PPM Max. 4= Half Size 3= 3.3Vdc B= -40 to 85EC 1D= ±50 PPM Gull Wing O-9

18 ECL Series FULL SIZE DESCRIPTION ECL (Emitter Coupled Logic) clock oscillators provide MECL 10K and 10HH compatible signals for applications such as high speed computing, graphic workstations, digital communications and A/D conversion. FEATURES! 10K or 10Kh output compatible, +5.2V or -5.2V supply voltage! Low output impedance! Excellent noise margins! Full size metal package S ECL Full Size Pin Configurations 20MHz to 140MHz PIN AA AM AE Frequency Stability ±100PPM, ±50PPM, ±25PPM 1 Case GND NC Enable /Disable Operating Temperature 0EC to 70EC or -40EC to 85EC 7-5.2V Case GND -5.2V Range 8 Output Output Output Storage Temperature Range -55EC to 125EC 14 GND -5.2V Case GND Input Voltage + or -5.2V ± 0.5V PIN AB AC AAC Input Current 140mA Max. 1 NC NC Comp Output Output Symmetry 40 / 1.4V Level 7-5.2V Case GND -5.2V Output Rise / Fall Time <40Sec measured between 20 to 80% voltage level 8 Output Output Output 0" / 1" Levels -1.6V Max. / -1.0V Min. 14 Case GND +5.2V Case GND Output Load Typical 50 Ohms to -2.0V DC PIN ACE AMC ACC 1 Enable/ Disable Comp Output Comp Output 7 Case GND Case GND Case GND 8 Output Output Output V -5.2V +5.2V Dimensions (Inches) ECL Part Number Break Down E 1 1 A 0 D - 20M AC Holder Supply Voltage Temp. Range Tolerence/ Stability Pin Configuration 1= Full Size 1= + or -5.2V ± 0.5V A= 0 to 70EC 0= ±100 PPM (See Table ) 3= Full Size B= -40 to 85EC 1= ±50 PPM Gull Wing O-10

19 ECL Series HALF SIZE DESCRIPTION ECL (Emitter Coupled Logic) clock oscillators provide MECL 10K and 10HH compatible signals for applications such as high speed computing, graphic workstations, digital communications and A/D conversion. FEATURES! 10K or 10Kh output compatible, +5.2V or -5.2V supply voltage! Low output impedance! Excellent noise margins! Half size metal package S ECL Half Size Pin Configurations 20MHz to 140MHz PIN AA AM AE Frequency Stability ±100PPM, ±50PPM, ±25PPM 1 Case GND NC Enable /Disable Operating Temperature 0EC to 70EC or -40EC to 85EC 4-5.2V Case GND -5.2V Range 5 Output Output Output Storage Temperature Range -55EC to 125EC 8 GND -5.2V Case GND Input Voltage + or -5.2V ± 0.5V PIN AB AC AAC Input Current 140mA Max. 1 NC NC Comp Output Output Symmetry 40 / 1.4V Level 4-5.2V Case GND -5.2V Output Rise / Fall Time <40Sec measured between 20 to 80% voltage level 5 Output Output Output 0" / 1" Levels -1.6V Max. / -1.0V Min. 8 Case GND +5.2V Case GND Output Load Typical 50 Ohms to -2.0V DC PIN ACE AMC ACC 1 Enable/ Disable Comp Output Comp Output 4 Case GND Case GND Case GND 5 Output Output Output V -5.2V +5.2V Dimensions (Inches) ECL Part Number Break Down E 2 1 A 0 D - 20M AC Holder Supply Voltage Temp. Range Tolerence/ Stability Pin Configuration 1= Half Size 1= + or -5.2V ± 0.5V A= 0 to 70EC 0= ±100 PPM (See Table) 3= Half Size B= -40 to 85EC 1= ±50 PPM Gull Wing O-11

20 DTCXO THRU-HOLE Digital Temperature Compensated Crystal Oscillators Input Voltage Output Voltage Frequency Stability 3.5MHz to 25MHz 5.0±10%Vdc >500Mv(rms) CMOS/ 5 TTL ±0.3ppm ~ ±1ppm Temperature Range 0~+70EC -20~+75EC -40~+75EC -55~+90EC Output Load 270 Ohms / 100pF 1K Ohms or 5TTL +15pF Output Wave Sine CMOS & TTL Harmonics & Subharmonics Input Current Calibration Range <-30 db <15mA >±5ppm Dimensions in mm DTCXO Thru-Hole Part Number DTC1525T- A H- 12M (Frequency) A= 0 to 70EC H= CMOS & TTL B= -20 to 70EC S= Sine Wave C= -40 to 75EC D= -55 to 90EC Phone: (800) , (626) , Fax: (626) O-12

21 TCXO THRU-HOLE Temperature Compensated Crystal Oscillators Input Voltage Output Voltage Frequency Stability 1MHz to 35MHz 5.0±10%Vdc >500Mv(rms) CMOS 5 TTL ±1ppm ~ ±10ppm Temperature Range 0~+60EC -20~+70EC -40~+75EC Output Load 270 Ohms/ 100pF 1K Ohms or 5TTL +15pF Output Wave Sine CMOS & TTL Harmonics & Subharmonics Input Current Calibration Range <-30 db <10mA >±5ppm Dimensions in mm TCXO Thru-Hole Part Number TC1218T-A H- 12M (Frequency) A= 0 to 60EC H= CMOS & TTL B= -20 to 70EC S= Sine Wave C= -40 to 75EC Phone: (800) , (626) , Fax: (626) O-13

22 TCXO 7x9 SMD 4 PAD Temperature Compensated Crystal Oscillators (MHz) 12.6, 12.8, 13.0, 14.4, 14.85, 15.36, 16.8, 19.2, 19.44, 19.68, 19.8 Input Voltage Max. Input Current Storage Temperature Range Output Load 3.0±5%Vdc 3Vdc, 25EC -40 ~ 85EC [10k Ohms/10pF]±10% Frequency Shift vs. Temperature ±2.5ppm (-20~+75EC) vs. Supply Voltage vs. Load At Shipping vs. Aging Voltage Controlled Range ±0.3ppm (3V±5%) ±0.2ppm ([10k Ohms/10pF]±10%) 25±2EC) ±1ppm per year +9~+15ppm (1.5V±1V) Dimensions in mm TCXO 7x9 SMD 4 PAD Part Number TC M (Frequency) Phone: (800) , (626) , Fax: (626) O-14

23 TCXO & VTCXO 14 Pin Surface Mount Temperature Compensated Crystal Oscillators Or With Voltage Control Output TTL/HCMOS Clipped Sinewave 1.0 MHz to 35 MHz 9.6 MHz to 35 MHz Frequency Stability Temperature See Table Aging ±1.0ppm/year (25EC) Supply Volt Change ±0.5ppm/(+5.0V ±5%) Load ±0.3ppm Input Voltage +5.0V ±5% Max. Input Current 20mA 3mA Storage Temperature Range -40 ~ 85EC Output Max.. Load 10TTL or 15pF HCMOS 20K Ohms/ 5pF Level High Min. TTL: 2.4Vdc, CMOS: Vdd-0.5 Vdc 1.0 Vp-p Min. Level Low Max. TTL: 0.4Vdc, CMOS: 0.5Vdc Frequency Tuning Control Voltage ±3.0ppm Min. 2.5Vdc ± 2.0Vdc Positive Transfer Characteristic Rise / Fall Time Max. 10n Sec. - Duty Cycle Max. 50 ± 10% - Operation Temperature Frequency Stibility (±PPM) *Denotes Availablity Range Code ~50EC A ** ** ** ** ** ** ** ** -10~60EC B ** ** ** ** ** ** ** ** -10~70EC C ** ** ** ** ** ** ** ** -20~70EC D ** ** ** ** ** ** ** ** -30~60EC E ** ** ** ** ** ** ** -30~70EC F ** ** ** ** ** ** ** -30~70EC G ** ** ** ** ** ** -40~80EC H ** ** ** ** ** TCXO & VTCXO Full Size Surface Mount Part TVCFS- 15 A T 5-12M28800 (Frequency) Frequency Stability Operating Temperature Output Frequency Deviation Two Digit Code 1 Letter Code T= TTL Blank= Pin #1 Open (TCXO) (See Table) (See Table) M= CMOS 5 = ±5ppm Min. C= CMOS/ TTL Compatible 10 = ±10ppm Min. S= Clipped Sinewave Phone: (800) , (626) , Fax: (626) O-15

24 VTCXO CLIPPED SINE WAVE SMD 4 PAD Temperature Compensated Crystal Oscillators With Voltage Control MHz to MHz Frequency Stability Temperature ±2.5ppm/-30EC to 75EC Aging ±1.0ppm/year (25EC) Supply Volt Change ±2.5ppm/(+3.0V ±5%) Input Voltage Max. Current Consumption Storage Temperature Range 3.0Vdc 2mA -40 ~ 85EC Output Load 10k Ohms/10pF Voltage Waveform 1.0V p-p Min. Clipped Sine Wave Frequency Tuning ±3.0ppm Min. Voltage Control Frequency Tuning Range ±4.0ppm Min. Function Control Voltage +1.5V±1.0Vdc Dimensions in mm VTCXO 9x11 SMD 4 PAD Part Number VTC M (Frequency) Phone: (800) , (626) , Fax: (626) O-16

25 VTCXO CLIPPED SINE WAVE SMD 6 PAD Temperature Compensated Crystal Oscillators With Voltage Control MHz to MHz Frequency Stability Temperature ±2.5ppm/-30EC to 75EC Aging ±1.0ppm/year (25EC) Supply Volt Change ±2.5ppm/(+3.0V ±5%) Input Voltage Max. Current Consumption Storage Temperature Range 3.0Vdc 2mA -40 ~ 85EC Output Load 10k Ohms/10pF Voltage Waveform 1.0V p-p Min. Clipped Sine Wave Frequency Tuning ±3.0ppm Min. Voltage Control Frequency Tuning Range ±4.0ppm Min. Function Control Voltage +1.5V±1.0Vdc Dimensions in mm VTCXO 9x11 SMD 6 PAD Part Number VTC M (Frequency) Phone: (800) , (626) , Fax: (626) O-17

26 VTCXO 3.2x5 SMD 4 PAD Temperature Compensated Crystal Oscillators With Voltage Control (MHz) 12.6, 12.8, 13.0, 14.4, 14.85, 16.8, 19.2, 19.44, 19.68, 19.8 Input Voltage Max. Input Current Storage Temperature Range Load 3.0±5%Vdc 3Vdc, 25EC -40 ~ 85EC [10k Ohms/10pF]±10% Frequency Shift vs. Temperature ±2.5ppm (-20~+75EC) vs. Supply Voltage vs. Load At Shipping vs. Aging ±0.2ppm (3V±5%) ±0.2ppm ([10k Ohms/10pF]±10%) 25±2EC) ±1ppm per year Output Level Voltage Controlled Range 0.8 Min. +5~+15ppm (1.5V±1V) Dimensions in mm VTCXO 3.2x5 SMD 4 PAD Part Number VTC M (Frequency) Phone: (800) , (626) , Fax: (626) O-18

27 VTCXO 7x9 SMD 4 PAD Temperature Compensated Crystal Oscillators With Voltage Control (MHz) 12.6, 12.8, 13.0, 14.4, 16.8, 19.2, Input Voltage Output Voltage 3.0±5%Vdc +1Vpp Min. Frequency Stability/ Temperature ±2.5ppm/ -30~+80EC ±5ppm/ -30~+80EC Power Source Variation Output Load Power Consumption ±0.3ppm Max./ +3V±5% 10pF/ 10k Ohms 1.5mA Max. (12.6 ~ 13.0MHz) 2.0mA Max. (14.4 ~ 19.68MHz) AFC Control Voltage Controlled by AFC Aging Higher Harmonic +1.5V±1.0V ±5ppm~±12ppm Max. ±1ppm per year -5dBm Max. Dimensions in mm VTCXO 7x9 SMD 4 PAD Part Number 2.5ppm Max. VTC M (Frequency) 5.0ppm Max. VTC M (Frequency) Phone: (800) , (626) , Fax: (626) O-19

28 VTCXO 3.5x6 SMD 4 PAD Temperature Compensated Crystal Oscillators With Voltage Control (MHz) 12.6, 12.8, 13.0, 14.4, 16.8, 19.2, Input Voltage Output Voltage Frequency Stability/ Temperature Power Source Variation Output Load Power Consumption 3.0±0.3Vdc +0.9Vpp Min. ±2.5ppm/ -30~+80EC ±0.3ppm Max./ +3V±10% 10pF/ 10k Ohms 1.5mA Max. (12.6 ~ 13.0MHz) 2.0mA Max. (14.4 ~ 19.68MHz) AFC Control Voltage Controlled by AFC Aging Higher Harmonic +1.5V±1.0V ±5ppm~±12ppm Max. ±1ppm per year -10dBm Max. Dimensions in mm VTCXO 3.5x6 SMD 4 PAD Part Number VTC M (Frequency) Phone: (800) , (626) , Fax: (626) O-20

29 CRYSTAL PART NUMBER REFERENCE SHEET X A A K 16M F L E 18 A Internal use Frequency M = MHz Mode K = KHz A = Fund. B = 3RD OT 25EC C = 5TH OT D = 7TH OT A = ± 5PPM E = 9TH OT B = ± 10PPM C = ± 15PPM D = ± 20PPM Cut E = ± 25PPM F = ± 30PPM A = AT CUT G = ± 50PPM B = BT CUT H = ±100PPM X = Other Temperature Range D = 0 to 50EC E = 0 to 70EC F = -5 to 55EC G = -10 to 60EC H = -20 to 70EC I = -25 to 85EC J = -40 to 85EC K = -55 to 105EC L = -55 to 125EC X = Other Load Capacitance (CL) Package A = HC6 B = HC12 C = HC50 D = UM-4 E = HC18 F = HC33 G = HC49USS H = UM-1/HC80 I = HC49UPS J = HC48 K = HC49 L = HC49US M = HC51 N = TO-5 P = HC49UP Q = UM-5/HC52 S = SMD 5X7 4 PAD T = SMD 5X7 2 PAD U = SMD 6X3 4 PAD V = SMD 6X3 2 PAD W = SMD 5X3 4 PAD Y = SMD 5X3 2 PAD Z = CYLINDRICAL X = Other Stability D = ± 5PPM F = ± 10PPM Options G = ± 15PPM H = ± 20PPM A = Standard I = ± 25PPM B = Top Wire J = ± 30PPM C = Gull Wing L = ± 50PPM D = Sleeve N = ±100PPM E = Top Wire, Sleeve X = Other F = Gull Wing, Sleeve G = Mylar Spacers H = Tape & Reel X = Other Marking: 00 = Series XX = pf (Parallel)

30 STANDARD CRYSTAL CORP. CRYSTALS QUICK SELECTOR GUIDE HC49U Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 11.0 x 4.8 x 13.5 AA=Fund. HC49U 1.8 to 125 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF B=Top Wire 0.43 x 0.19 x 0.53 CA=5th OT C=Gullwing page C-1 Part Number AA K 20M00000 F L E 00 A HC49US Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 11.4 x 5.0 x 4.0 AA=Fund. HC to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT US MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF 0.45 x 0.20 x 0.14 page C-2 Part Number AA L 20M00000 F L E 00 A HC49USS Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 11.4 x 5.0 x 2.5 AA=Fund. HC to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT USS MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF 0.45 x 0.20 x 0.10 page C-2 Part Number AA G 20M00000 F L E 00 A HC49UP Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 12.5 x 4.6 x 5.0 AA=Fund. HC to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT UP MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R x 0.18 x 0.19 page C-3 Part Number AA P 20M00000 F L E 00 H HC49UPS Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 12.5 x 4.6 x 3.5 AA=Fund. HC to 75 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT UPS MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R x 0.18 x 0.14 page C-3 Part Number AA I 20M00000 F L E 00 A 5 x 7 SMD Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 7.2 x 5.2 x 1.13 AA=Fund. 5 x 7 10 to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT 4 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R x 0.21 x 0.05 page C-4 Part Number AA S 20M00000 F L E 00 H 5 x 7 SMD Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 7.2 x 5.2 x 1.13 AA=Fund. 5 x 7 10 to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT 2 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R x 0.21 x 0.05 page C-4 Part Number AA T 20M00000 F L E 00 H 6 x 3.5 SMD Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 6.0 x 3.5 x 1.12 AA=Fund. 6 x to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT 4 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R x 0.14 x 0.05 page C-5 Part Number AA U 20M00000 F L E 00 H 6 x 3.5 SMD Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options page C x 0.35 x 1.12 AA=Fund. 6 x to 85 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT 2 pad MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF H=Tape/ R x 0.14 x 0.05 Part Number AA V 20M00000 F L E 00 H A-4

31 STANDARD CRYSTAL CORP. CRYSTALS QUICK SELECTOR GUIDE 5 x 3.2 SMD Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 5.0 x 3.2 x 1.0 AA=Fund. 5 x to 45 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard 4 pad MHz G=±50ppm N= ±100ppm 20=20pF H= Tape/ R x 0.13 x 0.04 page C-6 Part Number AA W 20M00000 F L E 00 H 5 x 3.2 SMD Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 5.0 x 3.2 x 1.0 AA=Fund. 5 x to 45 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard 2 pad MHz G=±50ppm N= ±100ppm 20=20pF H=Tape/ R x 0.13 x 0.04 page C-6 Part Number AA Y 20M00000 F L E 00 H UM-1 (HC80) Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 7.7 x 3.0 x 8.6 AA=Fund. UM-1 10 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF B=Top Wire 0.31 x 0.12 x 0.34 page C-7 Part Number AA H 20M00000 F L E 00 A UM-5 (HC52) Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 7.7 x 3.0 x 5.8 AA=Fund. UM-5 15 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF 0.31 x 0.12 x 0.23 page C-8 Part Number AA Q 20M00000 F L E 00 A UM-4 Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 7.7 x 3.0 x 4.5 AA=Fund. UM-4 20 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF 0.31 x 0.12 x 0.18 Page C-9 Part Number AA D 20M00000 F L E 00 A TO-5 Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options i9.6 x i6.7 AA=Fund. TO-5 5 to 150 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF i0.378 x i0.265 page C-10 Part Number AA N 20M00000 F L E 00 A HC51 Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 19.2 x 8.9 x 19.7 AA=Fund. HC to 20.0 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF B=Top Wire 0.76 x 0.35 x 0.78 C=Gullwing page C-11 Part Number AA M 20M00000 F L E 00 A HC6 (pin) Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options 19.2 x 8.9 x 19.7 AA=Fund. HC6 1.0 to 20.0 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF 0.76 x 0.35 x 0.78 page C-11 Part Number AA A 20M00000 F L E 00 A 3 x 9 Dimensions mm/inch Mode/cut Holder Frequency 25EC Freq. Stability Temp. Range Load Cap. Options Cylindrical i9.3 x i3.1 AA=Fund. 3 x to 60.0 F= ±30ppm L= ±50ppm E=0E to 70EC 00=Series A=Standard BA=3rd OT MHz G=±50ppm N= ±100ppm J=-40E to 85EC 20=20pF i0.37 x i0.12 page C-12 Part Number AA Z 20M00000 F L E 00 A A-5

32 CRYSTAL REQUEST FOR QUOTE SHEET Your Company Name: Your Name:, Phone : Fax:, Address: Quantity:, Delivery: Part Number: Example: AAK20M000000FLE20A Package Type: (HC49U, UM-1, 5x7 SMD 4 Pad, Etc.) Frequency: MHz or KHz Frequency Tolerance: ± 25EC Frequency Stability: ± Operating Temperature Range Operating Temperature Range: from EC to EC rd Mode of Operation: (Fundamental, 3 Overtone, Etc.) Load Capacitance (CL): Parallel pf or Series Resistance: Ohms C0 (Shunt): pf C1 ( Motional): pf Options: Top Wire, Gull Wing, Sleeve, Insulator, T&R. Special Instructions:

33 CUSTOM MADE CRYSTALS Specifications Package Styles Frequency 25EC±2EC 10 to 100PPM Seal Lead Type Large Standard Miniature Operating Temperature Ranges -10EC to 60EC Resistance Wire HC51U HC49U UM-1-20EC to 70EC Weld -30EC to 80EC -40EC to 85EC -55EC to 105EC Solder Pin Wire HC48U HC33U HC50U HC18U Seal Freq. Stability Over Temperature 10 to 100PPM Pin HC6U HC25U Range Load Capacitance (TYP) 12pF to 50pF & Series Oscillation Fundamental MHz MHz 2-30MHz Mode Overtone N/A MHz MHz Aging Rate per Year Drive Level 1 to 7PPM 0.1mW (TYP) STANDARD FREQUENCIES AVAILABLE IN HC49/U PACKAGE Frequency 25EC ± 30PPM, Temperature Stability 0 to 70EC ± 50PPM FREQ. (MHz) CL (pf) ESR (Ohms) FREQ. (MHz) CL (pf) ESR (Ohms) FREQ. (MHz) CL (pf) ESR (Ohms) Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series Series 40 For unlisted frequencies or different specifications contact the factory

34 HC49U MICROPROCESSOR CRYSTALS / RESISTANCE WELD to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency Stability ± 100 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in In (mm) HC49U Part Number Break Down AA K 20M F L E 18 A (Frequency) CL MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC B= Top Wire th CA= 5 Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC C= Gull Wing th DA= 7 Overtone G= ±50 PPM N= ±100 PPM D= Sleeve H= ±100 PPM C-1

35 HC49US Low Profile MICROPROCESSOR CRYSTALS / RESISTANCE WELD to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency 25EC ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF or Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in mm HC49US Part Number Break Down AA L 20M F L E 18 H (Frequency) CL MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental G = 2.8 H B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone L = 4.0 H D= ±20 PPM J = ±30 PPM H= -20 to 70EC F= ±30 PPM L= ±50 PPM J= -40 to 85EC G= ±50 PPM N= ±100 PPM H= ±100 PPM C-2

36 HC49UP Low Profile Surface Mount MICROPROCESSOR CRYSTALS / RESISTANCE WELD to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency 25EC ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF or Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in mm Recommended Pad Layout HC49UP Part Number Break Down AA P 20M F L E 18 H (Frequency) CL MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental I = 3.5 H B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone P = 5.0 H D= ±20 PPM J = ±30 PPM H= -20 to 70EC H= Tape & Reel F= ±30 PPM L= ±50 PPM J= -40 to 85EC G= ±50 PPM N= ±100 PPM H= ±100 PPM C-3

37 5x7 CRYSTAL MINIATURE SMD MICROPROCESSOR CRYSTAL Frequency Tolerance 10 to 100 MHz ± 50 PPM (Standard) Frequency Stability ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 100uWatt Maximum ±3 PPM per year Maximum Dimensions in mm Layout T - 2 PAD Pad Layout S - 4 PAD Pad 5 x 7 MINI. SMD CRYSTAL Part Number Break Down AA S 20M F L E 18 H (Frequency) CL MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental S = 4 Pad D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone T = 2 Pad F= ±30 PPM J= ±30 PPM H= -20 to 70EC H= Tape & Reel G= ±50 PPM L= ±50 PPM J= -40 to 85EC H= ±100 PPM N= ±100 PPM C-4

38 6x3 CRYSTAL MINIATURE SMD MICROPROCESSOR CRYSTAL Frequency Tolerance 12 to 100 MHz ± 50 PPM (Standard) Frequency Stability ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 100uWatt Maximum ±3 PPM per year Maximum Dimensions in mm U - 4 PAD Pad Layout V - 2 PAD Pad Layout 6X3 MINI. SMD CRYSTAL Part Number Break Down AA U 20M F L E 18 H (Frequency) CL MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental U = 4 Pad D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone V = 2 Pad F= ±30 PPM J= ±30 PPM H= -20 to 70EC H= Tape & Reel G= ±50 PPM L= ±50 PPM J= -40 to 85EC H= ±100 PPM N= ±100 PPM C-5

39 5x3 CRYSTAL MINIATURE SMD MICROPROCESSOR CRYSTAL Frequency Tolerance 10 to 45 MHz (Fundamental) ± 50 PPM (Standard) Frequency Stability ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 100uWatt Maximum ±3 PPM per year Maximum Dimensions in mm W - 4 PAD Pad Layout Y - 2 PAD Pad Layout 5 x 3 MINI. SMD CRYSTAL Part Number Break Down AA W 20M F L E 18 H (Frequency) CL MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental W = 4 Pad F= ±30 PPM J= ±30 PPM E= 0 to 70EC A= Standard Y = 2 Pad G= ±50 PPM L= ±50 PPM H= Tape & Reel H= ±100 PPM N= ±100 PPM stdxtl@pacblell.net C-6

40 UM-1 (HC80) MICROPROCESSOR CRYSTALS / RESISTANCE WELD 10 to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency Stability ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in In (mm) UM-1 Part Number Break Down AA H 20M F L E 18 A (Frequency) CL MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC B= Top Wire th CA= 5 Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC C= Gull Wing G= ±50 PPM N= ±100 PPM H= ±100 PPM C-7

41 UM-5 (HC52) MICROPROCESSOR CRYSTALS / RESISTANCE WELD 10 to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency Stability ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in In (mm) UM-5 Part Number Break Down AA Q 20M F L E 18 A (Frequency) CL MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC th CA= 5 Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC G= ±50 PPM N= ±100 PPM H= ±100 PPM C-8

42 UM-4 MICROPROCESSOR CRYSTALS / RESISTANCE WELD 10 to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency Stability ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in In (mm) UM-4 Part Number Break Down AA D 20M F L E 18 A (Frequency) CL MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental B= ±10 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone D= ±20 PPM J= ±30 PPM H= -20 to 70EC th CA= 5 Overtone F= ±30 PPM L= ±50 PPM J= -40 to 85EC G= ±50 PPM N= ±100 PPM H= ±100 PPM C-9

43 TO-5 MICROPROCESSOR CRYSTALS / RESISTANCE WELD 5 to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency Stability ± 100 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in In (mm) TO-5 Part Number Break Down AA N 20M F L E 18 A (Frequency) CL MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone F= ±30 PPM J= ±30 PPM J= -40 to 85EC th CA= 5 Overtone G= ±50 PPM L= ±50 PPM th DA= 7 Overtone H= ±100 PPM N= ±100 PPM C-10

44 HC51 / HC6 RESISTANCE WELD 1.0 to MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency 25EC ± 50 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF or Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in mm HC51 / HC6 Part Number Break Down AA M 20M F L E 18 A (Frequency) CL MODE HOLDER TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental M = HC51 D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard A = HC6 F= ±30 PPM J = ±30 PPM J= -40 to 85EC B= Top Wire G= ±50 PPM L= ±50 PPM (HC51 Only) H= ±100 PPM N= ±100 PPM C-11

45 3x9 Cylindrical Crystal to 60.00MHz Frequency Tolerance ± 50 PPM ( Standard ) Frequency Stability ± 100 PPM ( Standard ) Operating Temperature Range 0EC to 70EC ( Standard ) Load Capacitance ( CL ) Shunt Capacitance Drive Lavel Aging 12pF to 50pF & Series 7pF Maximum 1mWatt Maximum ±5 PPM per year Maximum Dimensions in In (mm) 3x9 Cylindrical Crystal Part Number Break Down AA Z 20M F L E 18 A (Frequency) CL MODE TOLERANCE STABILITY TEMP. RANGE OPTIONS AA= Fundamental D= ±20 PPM H= ±20 PPM E= 0 to 70EC A= Standard rd BA= 3 Overtone F= ±30 PPM J= ±30 PPM J= -40 to 85EC G= ±50 PPM L= ±50 PPM H= ±100 PPM N= ±100 PPM C-12