How to Order Manifold. Manifold mounting. DIN rail mounting style Direct mounting style

Transcription

1 Plug Lead Unit Series 000 [Option] How to Order Manifold S 0 FD D Electrical entry F kit D-sub connector kit P kit Kit type Flat ribbon cable connector kit J kit Flat ribbon cable (0P) (PC Wiring System compatible) C kit 0 Note) P ( 0P ) FD0 FD FD FD PD0 PD PD PD PDC JD0 Stations station stations Note) The maximum number of stations depends on the type of electrical entries. D E Note) Lead wire connector location () Manifold mounting DIN rail mounting style Direct mounting style Note) Type E is only available with a C kit. Refer to page 0 for details. Cable specifications D-sub connector (P) kit, without cable D-sub connector (P) kit, with. m cable D-sub connector (P) kit, with.0 m cable D-sub connector (P) kit, with.0 m cable Flat ribbon cable (P) kit, without cable Flat ribbon cable (P) kit, with. m cable Flat ribbon cable (P) kit, with.0 m cable Flat ribbon cable (P) kit, with.0 m cable Flat ribbon cable (0P) kit, without cable Flat ribbon cable (0P) PC Wiring System compatible CE compliant Nil Q CE marked (P), (R) port size Nil (P), (R) port, One-touch fittings for ø0 00T (P), (R) port, One-touch fittings for ø/" Option Nil None 0 to () DIN rail length specified B Back pressure check valve K () Special wiring specifications (Except double wiring) N With name plate (Side ported only) R External pilot specifications S Built-in silencer, direct exhaust Note ) Specify DIN rail length with D at the end. (Enter the number of stations inside.) The number of stations that may be displayed is longer than the manifold number of stations. Example: -D0 Note ) When installing back pressure check valves only on the stations required, enter the part number and specify the mounting stations on a manifold specification sheet. Note ) Standard wiring specifications are for double wiring. Indicate wiring specifications for single wiring or mixed single and double wiring, or when exceeding the standard maximum number of stations. (Except C kit.) Note ) For specifying two or more options, enter them alphabetically. Example: -BKN Refer to pages 0 to 0 for manifold option parts. Stations to stations to stations to stations to stations Max. number of stations for special wiring specifications stations stations stations () Max. number of solenoids C Connector kit to stations Connector kit 0 Note ) Separately order the 0P type cable assembly for the P kit. Note ) The maximum number of stations should not be more than the maximum number of solenoids. (The number of solenoids are counted as: for single solenoids and for type P and P double solenoids.) Refer to page 0 for manifold spare parts.

2 Type of actuation position single () B C 0 position closed center ()(B) position exhaust center ()(B) position double (Latching) () ()(B) (R)(P)(R) (R) (P)(R) position double (Double solenoid) () ()(B) ()(B) (R) (P)(R) position pressure center ()(B) position dual port valve (R) N.C. () (B) (R) (P)(R) (R) (P)(R) (R) (P)(R) (R) (P)(R) () (P) (B) ()(B) (R) (P)(R) (R) (R) N.C. (P) N.C. position dual port valve () () (B) (R) (R) N.O. (P) N.O. position dual port valve () () (B) (R) N.O. Note ) Refer to page 0 for precautions. Note ) For double solenoid specifications, the function symbol below is D. Note ) Only rubber seal types are applicable. Seal 0 Function Nil Standard type (.0 W DC) position double (Double solenoid specifications) D (Latching type: Nil) N Negative COM Y () () Low wattage type (0. W DC) () R External pilot specifications Note ) Except double (latching) type. Note ) Please select when you expect to energize the unit for extended periods of time. Refer to page for details. Note ) Except dual port valves. Note ) When two or more symbols are specified, indicate them alphabetically. How to Order Valves L C Manual override Nil Non-locking push type (Tool required) Coil voltage VDC VDC When ordering with manifolds When only valves are required. Note) Except double (latching) type. Note) Light/Surge voltage suppressor is built-in. Port plug mounting port Nil None Port () B Port (B) Cylinder port C One-touch fitting for ø C One-touch fitting for ø C One-touch fitting for ø L One-touch fitting for ø L One-touch fitting for ø L One-touch fitting for ø B Note) Locking type (Tool required) Electrical entry L Plug connector type With 00 mm lead wire With/Without manifold block Nil M MB Without manifold block CE compliant Nil Q CE marked With manifold block Lead wire is not included. Lead wire is not included. For adding stations Side ported () Top ported Note ) Can be changed to side ported configuration. Note ) Refer to page 0 for the inch-size one-touch fittings. D Note) Slide locking type (Manual type) Only side ported type applicable LO Plug connector type without connector With manifold block, built-in back pressure check valve For F, P, J kit manifolds Note) Note) Indicate LO when ordering centralized wiring type manifolds, F, P, and J kits, since the lead wire will be attached to the manifold side. 0 J VP C Z

3 R P R P Series 000 Manifold Option Blanking plate S P. 0 Individual SUP/EXH spacer P. 0 Name plate (-N) P. 0 External pilot P. 0 C S000-PR-- S000-N-n specifications (-R) L External pilot port SUP/EXH block P. 0 SUP block plate P. 0 S000-PR--C0 (-S) S000-B-R Blanking plug KQP-0/0/0/0 P. 0 Dual flow fitting C0 S000--N P. 0 Individual SUP spacer C S000-P-- L P. 0 EXH block plate S000-B-R P. 0 Port plug VZ000-CP P. 0 Silencer (For EXH port) P. 0 SMC N00 Individual EXH spacer C S000-R-- L P. 0 Back pressure check valve (-B) P. 0 Built-in silencer (-S) P. 0 Special wiring specifications (-K) P. 00 S000-BP D-sub connector Terminal no. 0 0 station stations stations stations stations stations stations stations SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Connector terminal no. lthough the standard products come with double wiring, mixed single and double wiring is available upon request. 0

4 How to Order Manifold ssembly (Example) Example: D-sub connector kit, with cable ( m) position single ( VDC) 0-L0-C ( sets) position double (Double solenoid) ( VDC) 0D-L0-C ( sets) position exhaust center ( VDC) 0-L0-C ( set) Blanking plate S ( set) m D-sub connector cable XT00-DS-00 Stations F kit (D-sub connector kit) 0-L0-C 0-L0-C 0-L0-C S-0FD-D set (F kit -station manifold base) 0-L0-C sets ( position single) 0D-L0-C sets ( position double [double solenoid]) 0-L0-C set ( position exhaust center) S set (Blanking plate) 0D-L0-C 0D-L0-C Cylinder port fitting C: ø One-touch fitting Manifold base ( stations) S-0FD-D The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc. dd the valve and option part numbers in order starting from the first station on the. When entry of part numbers becomes complicated, indicate on the manifold specification sheet. S L0-C 0D-L0-C J VP C Z 0

5 Series 000 Valve Specifications Model Series 000 position position position position single () (B) (R) (P)(R) position double (Latching) ()(B) ()(B) (R) (P)(R) (R) (P)(R) position double (Double solenoid) () (B) () (B) (R) (P)(R) Number of solenoids Single Double (Latching) Double (Double solenoid) Closed center Exhaust center Pressure center Dual port valve JIS Symbol Flow characteristics () Model / (P /B) / / (/B R/R) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv 0 0 0D D (R) (P)(R) B C. 0. Specifications 0.0. Valve construction Fluid Maximum operating pressure Single Double (Latching) Double (Double solenoid) position position mbient and fluid temperature Lubrication Pilot valve manual override Vibration/Impact resistance () Protection structure Coil rated voltage llowable voltage fluctuation Coil insulation type Power consumption VDC (Current) VDC Response time (ms) () Standard: Low W wattage 0 or less or less or less or less or less or less or less 0 or less 0 or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less or less Note ) Values for the top ported cylinder port size of C, CYL Values of EXH. The side ported type will be about 0% less. Note ) Based on JIS B -. (Values with a supply pressure of 0. MPa and light/surge voltage suppressor. Values fluctuate depending on the pressure and air quality.) Valve specifications Solenoid specifications Min. operating pressure Mass (g) ir/inert gas 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa 0. MPa 0 to 0 C () Not required Push type (Tool required)/locking type (Tool required) Slide locking type (Manual type) 0/0 m/s Dust tight VDC, VDC ±0% of rated voltage Equivalent to class B W DC ( m), 0. W DC ( m) () W DC ( m), 0. W DC ( m) () Note ) Use dry air to prevent condensation when operating at low temperatures. Note ) Vibration resistance: No malfunction occurred in a one-sweep test between and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and deenergized states every once for each condition. Note ) Values for the low wattage (0. W) specifications. position closed center ()(B) (R) (P)(R) position exhaust center ()(B) position pressure center ()(B) (R)(P)(R) position dual port valve () position dual port valve (B) N.O. N.O. position dual port valve (C) (R) (P)(R) N.C. N.C. N.C. N.O. 00

6 Manifold Specifications Base model Porting specifications Port size (), (B) (P), (R) Port location Port size pplicable solenoid valve Type of connection pplicable station () () () station station mass mass (g) (g) S- - C0 (For ø0) Option Built-in silencer, direct exhaust C (For ø) C (For ø) C (For ø) L (For ø) L (For ø) L (For ø) 0 F kit: D-sub connector to stations P to stations P kit: Flat ribbon cable 0P to stations J kit: Flat ribbon cable to stations PC Wiring System compatible C kit: Connector kit to stations Note ) One-touch fittings in inch sizes are also available. For details, refer to page 0. Note ) Can be changed to side ported configuration. Note ) n optional specification for special wiring is available to increase the maximum number of stations. Refer to page 00 for details. Note ) Except valves. For valve mass, refer to page00. P F kit Side () Top (), (B) port (R) port (P) port P/0P (P kit) 0P (J kit) P kit J kit J VP C Z C kit 0

7 Series 000 F Kit (D-sub Connector kit) Simplification and labor savings for wiring work can be achieved by using a D-sub connector for the electrical connection. Using connector for flat ribbon cable (P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. Top or side entry for the connector can be changed freely, allowing later changes according to the mounting space. Manifold specifications Series 000 Port location Side, Top Porting specifications Port size (P), (R) (), (B) C0 C, C, C Maximum number of stations stations ( as an option) D-sub Connector ( pins) XT00-DS D-sub connector cable assemblies can be ordered with manifolds. Refer to manifold ordering. L (.) D-sub Connector Cable ssembly Cable ssembly part no. length (L) Note. m m m 0 SMC.0 XT00-DS-0 XT00-DS-00 XT00-DS-00 Cable 0. mm x cores O.D. ø. ø0 Seal (length indication) Molded cover x M. x 0. Connector DB-SF-N manufactured by Japan viation Electronics Industry, Ltd. Socket side Terminal no. Cable 0. mm x cores Cable assembly D-sub Connector Cable ssembly Terminal No. Terminal number 0 0 Lead wire color Dot marking None Brown None Red None Orange None Yellow None Pink None Blue None Purple White Gray White White Red Yellow Red Orange Red Yellow Pink Blue White Purple None Gray None Orange Red White Brown White Pink Red Gray Red White White None For other commercial connectors, use a pins type with female connector conforming to MIL-C-0. Cannot be used for transfer wiring. Lengths other than the above are also available. Please contact SMC for details. Electric characteristics Item Characteristics Conductor resistance Ω/km, 0 C or less Withstand voltage VC, min. 000 Insulation resistance MΩ/km, 0 C or more 0 Note) The minimum bending radius for D- sub connector cables is 0 mm. Connector manufacturers example Fujitsu, Ltd. Japan viation Electronics Industry, Ltd. J.S.T. Mfg. Co., Ltd. Hirose Electric Co., Ltd. stations Valves are numbered from the. Electrical wiring specifications D-sub connector 0 station stations stations stations stations stations stations stations stations 0 stations stations stations 0 s the standard electrical wiring specifications, double wiring (connected to SOL. and SOL. B) is adopted for the internal wiring of each station for stations or less, regardless of valve and option types. Mixed single and double wiring is available as an option. For details, refer to page 00. Connector terminal no. Lead wire colors for D-sub connector assembly XT00-DS Terminal no. Polarity Lead wire Dot color marking SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. 0 0 ( ) None ( ) Yellow ( ) Brown None ( ) Pink ( ) Red None ( ) Blue White ( ) Orange None ( ) Purple None ( ) Yellow None ( ) Gray None ( ) Pink None ( ) Orange ( ) Blue None ( ) Red White ( ) Purple White ( ) Brown White ( ) Gray ( ) Pink Red ( ) White ( ) Gray Red ( ) White Red ( ) White ( ) Yellow Red ( ) White None ( ) Orange Red Note) Positive common Negative common specifications specifications Note) When using the negative common specifications, use valves for negative common.

8 (Mounting hole dimension) (.).. pplicable connector: D-sub connector (P) (Conforming to MIL-C-0) L. L L M: External pilot port.. P =. Release for switching 0 connector direction ( position). [Single, Double, Dual port valve]. () EXH outlet C0: (R) port C0: (P) port Stations n R P 0. P =. For top ported B. Indicator light Manual override x M clamp screw J VP C Z n x C, C, C ((), (B) port) C: One-touch fitting for ø C: One-touch fitting for ø C: One-touch fitting for ø Dimensions L L L L n Formula: L =.n + 0 n: Stations (Maximum stations)

9 Series 000 P Kit (Flat ribbon cable connector) Simplification and labor savings for wiring work can be achieved by using a MIL type for the electrical connection. Using connector for flat ribbon cable (P, 0P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. Top or side entry for the connector can be changed freely, allowing later changes according to the mounting space. Flat Ribbon Cable ( pins, 0 pins) Manifold Specifications Series 000 Port location Porting specifications Port size (P), (R) (), (B) Side, Top C0 C, C, C Maximum number of stations stations ( as an option) 0 XT00-FC - Type P flat ribbon cable connector assemblies can be ordered with manifolds. Refer to manifold ordering. 0 (0P).(P) Flat Ribbon Cable Connector ssembly Cable ssembly part no. length (L). m m m Terminal no. (.) Red P XT00-FC- XT00-FC- XT00-FC- L Cable assembly WG 0P XT00-FC0- XT00-FC0- XT00-FC0- For other commercial connectors, use a pins or 0 pins with strain relief conforming to MIL-C-0. Cannot be used for transfer wiring. Lengths other than the above are also available. Please contact SMC for details. Connector manufacturers example Hirose Electric Co., Ltd. Sumitomo M Limited Fujitsu Limited Japan viation Electronics Industry, Ltd. J.S.T. Mfg. Co., Ltd. Oki Electric Cable Co,. Ltd. stations Valves are numbered from the. Electrical wiring specifications Flat ribbon cable connector station stations stations stations stations stations stations stations stations 0 stations stations stations 0 0 <P> Connector terminal no. Terminal no. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. SOL. Double wiring (connected to SOL. and SOL. B) is adopted for the internal wiring of each station, regardless of valve and option types. Mixed single and double wiring is available as an option. For details, refer to page 00. Triangle mark indicator position Polarity station stations stations stations stations stations stations stations stations ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 0 ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 0 ( ) ( ) ( ) ( ) ( ) ( ) ( ) Note) Positive Negative common common specifications specifications <0P> Terminal no. Polarity SOL. ( ) ( ) SOL. ( ) ( ) SOL. ( ) ( ) SOL. ( ) ( ) SOL. ( ) 0 ( ) SOL. ( ) ( ) SOL. ( ) ( ) SOL. ( ) ( ) SOL. ( ) ( ) 0 Positive common specifications Note) Negative common specifications 0 Note) When using the negative common specifications, use valves for negative common.

10 (Mounting hole dimension) (.).. L. L M: External pilot port L. P =. Release for switching 0 connector direction ( position). [Single, Double, Dual port valve]. () Triangle mark indicator position pplicable connector: Flat ribbon cable connector (P) (Conforming to MIL-C-0). EXH outlet C0: (R) port C0: (P) port 0 R P. P =. For top ported B. Stations n Indicator light Manual override x M clamp screw..... n x C, C, C ((), (B) port) C: One-touch fitting for ø C: One-touch fitting for ø C: One-touch fitting for ø 0 J VP C Z Dimensions L L L L n Formula: L =.n + 0 n: Stations (Maximum stations)

11 Series 000 J Kit (PC wiring system compatible flat ribbon cable Kit) PC Wiring System compatible. Using connector for flat ribbon cable (0P) conforming to MIL standard permits the use of connectors put on the market and gives a wide interchangeability. Top or side entry for the connector can be changed freely, allowing later changes according to the mounting space. Manifold specifications Series 000 Port location Side, Top Porting specifications Port size (P), (R) (), (B) C0 C, C, C Maximum number of stations stations ( as an option) stations Valves are numbered from the. Electrical wiring specifications Double wiring (connected to SOL. and SOL. B) is adopted for the internal wiring of each station, regardless of valve and option types. Mixed single and double wiring is available as an option. For details, refer to page 00. Terminal no. Polarity SOL. 0 ( ) station ( ) Flat ribbon cable connector SOL. ( ) stations ( ) 0 SOL. ( ) stations 0 ( ) SOL. ( ) stations ( ) SOL. ( ) 0 stations ( ) Connector terminal no. SOL. ( ) stations ( ) Triangle mark SOL. ( ) indicator position stations ( ) SOL. ( ) stations ( ) ( ) ( ) ( ) ( ) Note) Positive Negative common common specifications specifications Note) When using the negative common specifications, use valves for negative common. For details about the PC Wiring System, refer to catalog CT.E0-0 separately. 0

12 .TURN.PUSH.TURN.PUSH (Mounting hole dimension) (.).. M: External pilot port Release for switching connector direction ( position). [Single, Double, Dual port valve] Triangle mark indicator position pplicable connector: Flat ribbon cable connector (0P) (Conforming to MIL-C-0) ().. EXH outlet C0: (R) port C0: (P) port. 0 Stations R P L L L P =. 0. P =. B B n For top ported B. Indicator light Manual override x M clamp screw n x C, C, C ((), (B) port) C: One-touch fitting for ø C: One-touch fitting for ø C: One-touch fitting for ø J VP C Z Dimensions L L L L n Formula: L =.n + 0 n: Stations (Maximum stations)

13 Series 000 C Kit (Connector) Standard with lead wires connected to each valve individually. Manifold Specifications Series 000 Port location Side, Top Porting specifications Port size (P), (R) (), (B) Maximum number of stations C0 C, C, C stations Wiring Specifications: Positive COM Specifications Since lead wires are connected to the valves as shown below, connect each wire to the power supply. stations Valves are numbered from the. Wiring Specifications: Negative COM Specifications (Option) Since lead wires are connected to the valves as shown below, connect each wire to the power supply. Single solenoid : side solenoid ( ) Single solenoid Red: side solenoid SOL. Lead wire color ( ) Red Red: COM SOL. Lead wire color Red ( ) : COM ( ) Double solenoid SOL. ( ) Lead wire color Red ( ) White Individual Common Connector ssembly Part No. Lead wire length Socket only ( pcs.) 00 mm 00 mm 000 mm 000 mm 000 mm : side solenoid ( ) White: B side solenoid ( ) Red: COM Single solenoid Double solenoid XT-L XT-L XT-L XT-L- XT-L- XT-L-0 XT-L-0 XT-L-0 XT-L-0 XT-L-0 XT-L-0 Plug connector lead wire length The lead wire length of the valves with lead wire is 00 mm. When ordering a lead wire length of 00 mm or longer, list the part numbers for the valve without connector and the connector assembly. Example) For lead wire length of 000 mm: 0-LO-C pcs. XT-L-0 pcs. Double solenoid SOL. Lead wire color Red ( ) White Red: side solenoid White: B side solenoid : COM ( ) Connector ssembly Part No. Lead wire length Single solenoid Double solenoid Socket only ( pcs.) XT-L 00 mm XT-NL XT-NL 00 mm XT-NL- XT-NL- 000 mm XT-NL-0 XT-NL mm XT-NL-0 XT-NL mm XT-NL-0 XT-NL-0 Note) When using the negative common specifications, use valves for negative common. Plug connector lead wire length The lead wire length of the valves with lead wire is 00 mm. When ordering a lead wire length of 00 mm or longer, list the part numbers for the valve without connector and the connector assembly. Example) For lead wire length of 000 mm: 0-LO-C pcs. XT-NL-0 pcs. ll Common Connector ssembly for ll Common Type Part No. Mounted valve (n: Station) Part no. Connector assembly shape Mounted valve (n: Station) Part no. Connector assembly shape Station n Single type XT-0B- Note) CB Red Station n Single type XT-0BN- Note) CB Red Station to (n ) station Single type XT-0- Note) CB Station to (n ) station Single type XT-0N- Note) CB Station n Latching, double solenoid -position, dual -port blanking plate Station to (n ) station Latching, double solenoid -position, dual -port blanking plate XT-B- Note) XT-- Note) Note) : Lead wire length. 0: 0. m, 0: 0. m, 0: m, 0: m, 0: m, 0: m 0 CB CB Red White White Station n Latching, double solenoid -position, dual -port blanking plate Station to (n ) station Latching, double solenoid -position, dual -port blanking plate XT-BN- Note) XT-N- Note) CB CB Red White White

14 (Mounting hole dimension) (.).. Lead wire length: 00 M: External pilot port ( position). [Single, Double, Dual port valve] L L L L P =...PUSH B.TURN.PUSH B.TURN B Indicator light Manual override x M clamp screw... J VP (). EXH outlet C0: (R) port C0: (P) port Stations n R P For top ported.. 0 C Z. 0. P =. n x C, C, C ((), (B) port) C: One-touch fitting for ø C: One-touch fitting for ø C: One-touch fitting for ø Dimensions L L L L L n Formula: L =.n +, L =.n + 0 n: Stations (Maximum stations)

15 Construction: Series 000 Plug Lead Type Main Parts and Pilot Valve ssembly type Single: 0 r e q w type Single: re q w 0 ()(B) ()(B) Double (Latching): 0 t e q w Double (Double solenoid): 0D y e q w e u position: 0 y e q w e u (R) (P)(R) 0 ()(B) (R)(P)(R) 0D ()(B) (R) (P)(R) ()(B) ()(B) ()(B) Double (Latching): t e q w Double (Double solenoid): D y e q w e u position: y e q w e u () (B) ()(B) (R) (P)(R) () (B) (R) (P)(R) D ()(B) (R)(P)(R) () (B) J VP C Z (R) (P)(R) Component Parts No. Description Body Spool/Sleeve Spool Piston (R)(P)(R) (R)(P)(R) Material Zinc die-casted Stainless steel () luminum () Resin (R)(P)(R) (R) (P)(R) Dual port valve: B C i e w q w e (R) (P)(R) Pilot Valve ssembly Note) No. For single Model For double (Latching) For double (Double solenoid) on side P: For side For double (Double solenoid) on B side P: For B side Dual port: For side Dual port: For B side Note) Nil : Standard N : Negative COM specifications Y : Low wattage specifications S(Y)- (N)J 0SL- J Negative COM: 0SN- J S(Y)- (N)J S(Y)- J S(Y)- (N)J-X S(Y)- J-X o B N.C. N.C. N.O. N.O. C N.C. N.O. 0