TS7900 Series 3-Terminal Fixed Negative Voltage Regulator
|
|
|
- Megan Wright
- 5 years ago
- Views:
Transcription
1 TO-220 ITO-220 TO-263 (D 2 PAK) Pin Definition: 1. Ground 2. Input (tab) 3. Output General Description The TS7900 series of fixed output negative voltage regulators are intended as complements to the popular TS7800 series device. These negative regulators are available in the same seven-voltage options as the TS7900 devices. In addition, one extra voltage option commonly employed in MECL systems is also available in the negative TS7900A Series. Available in fixed output voltage options from -5.0 to -24 volts, these regulators employ current limiting, thermal shutdown, and safe-area compensation--making them remarkably rugged under most operating conditions. With adequate heat sinking they can deliver output currents in excess of 1 ampere. This series is offered in 3-pin TO-220, ITO-220 & TO-263 package. Features Output oltage Range -5 to -24 Output current up to 1A No external components required Internal thermal overload protection Internal short-circuit current limiting Output transistor safe-area compensation Output voltage offered in 4% tolerance Ordering Information Part No. Package Packing TS79xxCZ C0 TO pcs / Tube TS79xxCI C0 ITO pcs / Tube TS79xxCM RN TO pcs / 13 Reel Note: Where xx denote voltage option Standard Application Circuit A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0 above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required if regulator is located an appreciable distance from power supply filter. ** = Co is not needed for stability; however, it does improve transient response. Absolute Maximum Rating (Ta = 25 o C unless otherwise noted) Parameter Symbol Limit Unit Input oltage IN * -35 Input oltage IN ** -40 Power Dissipation P D Internal Limited W Operating Junction Temperature T J 0~+125 Storage Temperature Range T STG -65~+150 Note: * TS7905 to TS7918 ** TS7924 *** Follow the derating curve o C o C 1/11 ersion: A07
2 TS7905 Electrical Characteristics (in= -10, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output voltage out -7.5 in -20, 10mA Iout 1A, PD 15W Line Regulation REGline Tj=25 o -7.5 in C -8 in Load Regulation REGload Tj=25 o 10mA Iout 1A C 250mA Iout 750mA Quiescent Current Iq Iout=0, Tj=25 o C in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C µ Ripple Rejection Ratio RR f=120hz, -8 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C TS7906 Electrical Characteristics (in= -11, Iout=500mA, 0oC Tj 125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output oltage out -8.5 in -21, 10mA Iout 1A, PD 15W Line Regulation REGline Tj=25 o -8.5 in C -9 in Load Regulation REGload Tj=25 o 10mA Iout 1A C 250mA Iout 750mA Quiescent Current Iq Iout=0, Tj=25 o C in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C u Ripple Rejection Ratio RR f=120hz, -9 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible, and thermal effects must be taken into account separately. This specification applies only for DC power dissipation permitted by absolute maximum ratings. 2/11 ersion: A07
3 TS7908 Electrical Characteristics in= -14, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output voltage out in -23, 10mA Iout 1A, PD 15W in Line Regulation REGline Tj=25 o C -11 in mA Iout 1A Load Regulation REGload Tj=25 o C 250mA Iout 750mA Quiescent Current Iq Iout=0, Tj=25 o C in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C µ Ripple Rejection Ratio RR f=120hz, 11 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C TS7909 Electrical Characteristics (in= -15, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output oltage out in -23, 10mA Iout 1A, PD 15W in Line Regulation REGline Tj=25 o C -12 in mA Iout 1A Load Regulation REGload Tj=25 o C 250mA Iout 750mA Quiescent Current Iq Iout=0, Tj=25 o C in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C u Ripple Rejection Ratio RR f=120hz, -12 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible, and thermal effects must be taken into account separately. This specification applies only for DC power dissipation permitted by absolute maximum ratings. 3/11 ersion: A07
4 TS7912 Electrical Characteristics (in= -19, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output oltage out in -27, 10mA Iout 1A, PD 15W in Line Regulation REGline Tj=25 o C -15 in mA Iout 1A Load Regulation REGload Tj=25 o C 250mA Iout 750mA Quiescent Current Iq Tj=25 o C, Iout= in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C u Ripple Rejection Ratio RR f=120hz, -15 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C TS7915 Electrical Characteristics in= -23, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output voltage out in -30, 10mA Iout 1A, PD 15W in Line Regulation REGline Tj=25 o C -18 in mA Iout 1A Load Regulation REGload Tj=25 o C 250mA Iout 750mA Quiescent Current Iq Tj=25 o C, Iout= in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C µ Ripple Rejection Ratio RR f=120hz, -18 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible, and thermal effects must be taken into account separately. This specification applies only for DC power dissipation permitted by absolute maximum ratings. 4/11 ersion: A07
5 TS7918 Electrical Characteristics in= -24, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output voltage out -21 in -33, 10mA Iout 1A, PD 15W -21 in Line Regulation REGline Tj=25 o C -22 in mA Iout 1A Load Regulation REGload Tj=25 o C 250mA Iout 750mA Quiescent Current Iq Iout=0, Tj=25 o C in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C µ Ripple Rejection Ratio RR f=120hz, -21 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C TS7924 Electrical Characteristics in= -33, Iout=500mA, 0 o C Tj 125 o C, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.) Tj=25 o C Output voltage out -27 in -38, 10mA Iout 1A, PD 15W -27 in Line Regulation REGline Tj=25 o C -28 in mA Iout 1A Load Regulation REGload Tj=25 o C 250mA Iout 750mA Quiescent Current Iq Iout=0, Tj=25 o C in ma Output Noise oltage n 10Hz f 100KHz, Tj=25 o C µ Ripple Rejection Ratio RR f=120hz, -27 in db oltage Drop drop Iout=1A, Tj=25 o C Output Short Circuit Current Ios Tj=25 o C ma Output oltage Δout/ ΔTj Iout=10mA, 0 o C Tj 125 o C / o C Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible, and thermal effects must be taken into account separately. This specification applies only for DC power dissipation permitted by absolute maximum ratings. 5/11 ersion: A07
6 Electrical Characteristics Curve Figure 1. Worse Case Power Dissipation as a Function of Ambient Temperature Figure 2. Peak Output Current as a Function of Input-Output Differential oltage Figure 3. Ripple Rejection as a Function of Frequency Figure 4. Ripple Rejection as a Function of Output oltage Figure 5. Output oltage as a Function of Junction Temperature Figure 5. Output oltage as a Function of Junction Temperature 6/11 ersion: A07
7 Application Information Figure 7. D 2 PAK Thermal Resistance and Maximum Power Dissipation vs. P.C.B Copper Length 7/11 ersion: A07
8 TO-220 Mechanical Drawing TO-220 DIMENSION DIM MILLIMETERS INCHES MIN MAX MIN MAX A B C D E F G H I J K L M N O P Marking Diagram XX Y M L CZ = Output oltage (05=-5, 06=-6, 08=-8, 09=-9, 12=-12, 15=-15, 18=-18, 24=-24) = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Package Code for TO-220 8/11 ersion: A07
9 ITO-220 Mechanical Drawing ITO-220 DIMENSION DIM MILLIMETERS INCHES MIN MAX MIN MAX A B 6.20 (typ.) (typ.) C 2.20 (typ.) (typ.) D 1.40 (typ.) (typ.) E F 0.80 (typ.) (typ.) G H I 1.47 (max.) (max.) J K L 1.15 (typ.) (typ.) M N O Marking Diagram XX Y M L CI = Output oltage (05=-5, 06=-6, 08=-8, 09=-9, 12=-12, 15=-15, 18=-18, 24=-24) = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Package Code for ITO-220 9/11 ersion: A07
10 TO-263 Mechanical Drawing TO-263 DIMENSION DIM MILLIMETERS INCHES MIN MAX MIN MAX A B C D E F G H I J Marking Diagram XX = Output oltage (05=-5, 06=-6, 08=-8, 09=-9, 12=-12, 15=-15, 18=-18, 24=-24) Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code CM = Package Code for TO /11 ersion: A07
11 Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 11/11 ersion: A07
12 Mouser Electronics Authorized Distributor Click to iew Pricing, Inventory, Delivery & Lifecycle Information: Taiwan Semiconductor: TS7924CZ TS7924CI TS7915CZ TS7915CI TS7908CI TS7908CZ TS7906CI TS7906CZ TS7909CZ TS7909CI TS7918CZ TS7918CI
TS78M00 Series 3-Terminal 500mA Positive Voltage Regulator
TO-220 TO-252 (DPAK) Pin Definition: 1. Input 2. Ground (tab) 3. Output General Description The TS78M00 Series positive voltage regulators are identical to the popular TS7800 Series devices, except that
TS7800 Series 3-Terminal Fixed Positive Voltage Regulator
TO-220 ITO-220 Pin Definition: 1. Input 2. Ground (tab) 3. Output General Description The TS7800 series voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator
TO-92 Pin Definition: SOT-23 Pin Definition: SOP-8 Pin Definition: SOT-89 1. Output 1. Output 1. Output 8. Input 2. Ground 2. Input 2. Ground 7. Ground 3. Input 3. Ground 3. Ground 6. Ground 4. N/C 5.
TS1085 3A Low Dropout Positive Voltage Regulator
TO-220 TO-263 (D 2 PAK) TO-252 (DPAK) Pin Definition: 1. Fixed / Adj 2. Output 3. Input Pin 2 connect to heat sink General Description TS1085 are high performance positive voltage regulators are designed
TS78L00 Series 3-Terminal 100mA Positive Voltage Regulator
TO-92 Pin Definition: SOT-23 Pin Definition: SOP-8 Pin Definition: 1. Output 1. Output 1. Output 8. Input SOT-89 2. Ground 2. Input 2. Ground 7. Ground 3. Input 3. Ground 3. Ground 6. Ground 4. N/C 5.
TS79M00 Series 3-Terminal 500mA Negative Voltage Regulator
TO-220 TO-252 (DPAK) Pin Definition: 1. Ground 2. Input (tab) 3. Output General Description The TS79M00 series of fixed output negative voltage regulators are intended as complements to the popular TS78M00
TS317 3-Terminal Adjustable Positive Voltage Regulator
TO-220 TO-263 (D 2 PAK) TO-252 (DPAK) SOT-223 Pin Definition: 1. Adjustable 2. Output 3. Input Heatsink is connected to Pin 2 General Description The is adjustable 3-terminal positive voltage regulator
TS mA Ultra Low Dropout Voltage Regulator
TO-220 TO-263 (D 2 PAK) TO-252 (DPAK) SOT-223 Pin Definition: 1. Input 2. Ground 3. Output General Description TS2937 of fixed-voltage monolithic micro-power voltage regulators is designed for a wide range
3-Termal 500mA Negative Voltage Regulator
3-Termal 500mA Negative Voltage Regulator DESCRIPTION The TS79M00 series of fixed output negative voltage regulators are intended as complements to the popular TS78M00 series device. These negative regulators
TS317L 3-Terminal Adjustable Positive Voltage Regulator
TO-92 Pin Definition: 1. Adjustable 2. Output 3. Input SOP-8 Pin Definition: 1. Input 8. N/C 2. Output 7. Output 3. Output 6. Output 4. Adjustable 5. N/C General Description The TS317L is adjustable 3-terminal
TS324 Low Power Quad Operational Amplifiers
DIP-14 General Description SOP-14 TS324 contains four independent high gain operational amplifiers with internal frequency compensation. The four opamps use a split power supply. The device has low power
TS358/TS2904 Single Supply Dual Operational Amplifiers
SOP-8 DIP-8 Pin assignment: 1. Output A 8. cc 2. Input A (-) 7. Output B 3. Input A (+) 6. Input B (-) 4. Gnd 5. Input B (+) General Description Utilizing the circuit designs perfected for recently introduced
TS2596 3A / 150KHz Buck Dc-Dc Converter
TO-220-5L TO-263-5L (D 2 PAK) Pin Definition: 1. Input 2. SW Output 3. Ground 4. Feedback 5. Enable General Description The Series are step-down switching regulators with all required active functions.
TSM1N60L 600V N-Channel Power MOSFET
TO-252 TO-251 Pin Definition: 1. Gate 2. Drain 3. Source PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) 600 12 @ V GS =10V 1 General Description The TSM1N60L is used an advanced termination scheme to provide
TS mA Low Quiescent Current CMOS LDO
SOT-23 Pin Definition: SOT-89 Pin Definition: TO-92 1. Ground 1. Ground 2. Output 2. Input 3. Input 3. Output Pin Definition: 1. Ground 2. Input 3. Output General Description TS9011 is a positive voltage
TS358 Single Supply Dual Operational Amplifiers
SOP-8 DIP-8 Pin assignment: 1. Output A 8. Vcc 2. Input A (-) 7. Output B 3. Input A (+) 6. Input B (-) 4. Gnd 5. Input B (+) General Description Utilizing the circuit designs perfected for recently introduced
3-Terminal 500mA Positive Voltage Regulator
3-Terminal 500mA Positive Voltage Regulator DESCRIPTION The TS78M00 Series positive voltage regulators are identical to the popular TS7800 Series devices, except that they are specified for only half the
TS39300/1/2/3 3A Ultra Low Dropout Voltage Regulator with Multi-Function
TO-220 TO-263 (D 2 PAK) TO-220-5L TO-263-5L (D 2 PAK) Pin Definition: TS39300 1. Input 2. Ground (tab) 3. Output Pin Definition: TS39301xx TS39302 TS39303xx 1. Enable 1. Enable 1. Enable 2. Input 2. Input
TS2950/A 150mA Ultra Low Dropout Voltage Regulator
TO-92 Pin Definition: 1. Output 2. Ground 3. Input TO-252 (DPAK) Pin Definition: 1. Input 2. Ground 3. Output General Description The TS2950/A are low power voltage regulators. These devices are excellent
TS1431 Adjustable Precision Shunt Regulator
SOT-23 Pin Definition: 1. Cathode 2. Reference 3. Anode General Description TS1431 series integrated circuits are three-terminal programmable shunt regulator diodes. These monolithic IC voltage references
TSM V P-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 55 @ V GS = -4.5V -4.0-20 85 @ V GS = -2.5V -2.5 Features Advance Trench Process Technology High Density
TS A Ultra Low Dropout Voltage Regulator
SOT-223 TO-252 (DPAK) Pin Definition: 1. Input 2. Ground (tab) 3. Output General Description The TS39100 are 1A ultra low dropout linear voltage regulators that provide low voltage, high current output
TSM V N-Channel MOSFET w/esd Protected
SOP-8 Pin Definition: 1. Source 2. Source 3. Source 4. Gate 5, 6, 7, 8. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 25 @ V GS = 4.5V 4.5 20 30 @ V GS = 2.5V 3.5 65 @ V GS = 1.8V 2.0 Features Advance
TS A Ultra Low Dropout Voltage Regulator with Multi-Function
TO-252-5L (PPAK) Pin Definition: 1. Enable 2. Input 3. Ground (tab) 4. Output 5. Flag / Feedback General Description The TS39103 are 1A ultra low dropout linear voltage regulators that provide low voltage,
TS79L00 Series 3-Terminal 100mA Negative Voltage Regulator
TO-92 SOT-89 Pin Definition: 1. Ground 2. Input 3. Output General Description The TS79L00 Series of negative voltage regulators are inexpensive, easy-to-use devices suitable for a multitude of applications
TS mA Low Noise CMOS LDO
SOT-343 Pin Definition: SOT-25 Pin Definition: DFN 2x2 1. Enable 1. Input 2. Ground 2. Ground 3. Output 3. Enable 4. Input 4. Bypass 5. Output Pin Definition: 1. Input 2. N/C 3. Output 4. N/C 5. Ground
TS432 Adjustable Precision Shunt Regulator
TO-92 Pin Definition: SOT-23 Pin Definition: SOT-25 1. Reference 1. Reference 2. Anode 2. Cathode 3. Cathode 3. Anode General Description TS432 series is a three-terminal adjustable shunt regulator with
TS2509 3A / 500KHz PWM Buck Converter
SOP-8 Pin Definition: 1. FB 8. Vss 2. EN 7. Vss 3. Comp 6. SW 4. Vcc 5. SW General Description TS2509 is step-down switching regulator with PWM control and with build in internal PMOS. TS2509 provides
TSM V N-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 33 @ V GS = 4.5V 4.9 20 40 @ V GS = 2.5V 4.4 100 @ V GS = 1.8V 2.9 Features Advance Trench Process Technology
TS34063 Dc to Dc Converter Controller
SOP-8 DIP-8 Pin Definition: 1. SC 5. Comp 2. SE 6. Vcc 3. CT 7. Ipk 4. Gnd 8. Vdriver General Description TS34063 is a monolithic switching regulator and subsystem intended for use as DC to DC converter.
TSM4946D 60V Dual N-Channel MOSFET
SOP-8 Pin Definition: 1. Source 1 8. Drain 1 2. Gate 1 7. Drain 1 3. Source 2 6. Drain 2 4. Gate 2 5. Drain 2 PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 55 @ V GS = 10V 4.5 60 75 @ V GS = 4.5V 3.9
TS mA/180kHz Dc to Dc Converter Controller
SOP-8 MSOP-8 Pin Definition: 1. SC 5. Comp 2. SE 6. Vcc 3. 7. Ipk 4. Gnd 8. Vdriver General Description The TS3063 is a monolithic switching regulator and subsystem intended for use as DC to DC converter.
3-Termal 100mA Positive Voltage Regulator
3-Termal 100 Positive Voltage Regulator DESCRIPTION The TS78L00 Series of positive voltage Regulators are inexpensive, easy-to-use devices suitable for a multitude of applications that require a regulated
TS19371 Boost (Step-up) WLED Driver with OVP
SOT-26 Pin Definition: 1. SW 6. VIN 2. GND 5. OVP 3. FB 4. CTRL SOP-8 Pin Definition: 1. VIN 8. SW 2. GND 7. GND 3. GND 6. GND 4. CTRL 5. FB General Description The TS19371 is a step-up DC/DC converter
TS1117B 1A Low Dropout Positive Voltage Regulator
TO-252 (DPAK) SOT-223 Pin Definition: 1. Fixed / Adj 2. Output (Tab) 3. Input SOP-8 Pin Definition: 1. Fixed / Adj 8. N/C 2. Output 7. Output 3. Output 6. Output 4. Input 5. N/C General Description TS1117B
Surface Mount Schottky Barrier Rectifiers
CREAT BY ART LL587 thru LL589 Surface Mount Schottky Barrier Rectifiers FEATURES - Plastic package has carries underwriters - Ideal for automated placement - Surge overload rating to 25 Ampers peak - Reliable
N-Channel Power MOSFET 600V, 0.5A, 10Ω
N-Channel Power MOSFET 6V,.5A, Ω FEATURES % Avalanche Tested Pb-free plating Compliant to RoHS Directive 2/65/EU and in accordance to WEE 22/96/EC Halogen-free according to IEC 6249-2-2 KEY PERFORMANCE
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO DESCRIPTION TS4264 is a 5V low-drop fixed-voltage regulator in an SOT-223 package. The IC regulates an input voltage in the range of 5.5V
1A Ultra Low Dropout Voltage Regulator
1A Ultra Low Dropout Voltage Regulator GENERAL DESCRIPTION The TS2940 series of fixed-voltage monolithic micropower voltage regulators is designed for a wide range of applications. This device excellent
TS A Buck (Step-down) WLED Driver
SOP-8 Pin Definition: 1. FB 8. GND 2. EN 7. GND 3. Comp 6. 4. Vcc 5. General Description TS19377 consists of step-down switching regulator with PWM control. These devise include a reference voltage source,
80mA Low Noise Ultra Low Dropout Voltage Regulator
80mA Low Noise Ultra Low Dropout Voltage Regulator DESCRIPTION The TS5204 series is an efficient linear voltage regulator with ultra-low noise output, very low dropout voltage (typically 20mV at light
TS1117B. 1A Low Dropout Positive Voltage Regulator. General Description. Features. Ordering Information. Typical Application Circuit.
TO-252 (DPAK) SOT-223 Pin Definition: 1. Fixed / Adj 2. Output (Tab) 3. Input SOP-8 Pin Definition: 1. Fixed / Adj 8. N/C 2. Output 7. Output 3. Output 6. Output 4. Input 5. N/C General Description TS1117B
BC807-16/-25/-40 Taiwan Semiconductor Small Signal Product 0.3 Watts, PNP Plastic-Encasulate Transistor
Small Signal Product 0.3 Watts, PNP Plastic-Encasulate Transistor FEATURES - Ideally suited for automatic insertion - Epitaxial planar die construction - For switching, AF driver and amplifer applications
TS1518 Step-Up DC-DC Converter, White LED Driver
SOT-25 Pin Definition: 1. SW 2. Ground 3. Feedback 4. CTRL 5. Input General Description The TS1518 is a step-up DC-DC converter; operates as current source to drive up to 6 white LEDs(V IN at 3.0V) or
500mA Ultra Low Dropout Voltage Regulator With Inhibit Function
500mA Ultra Low Dropout Voltage Regulator With Inhibit Function DESCRIPTION The TS2938 series of fixed-voltage monolithic micropower voltage regulators is designed for a wide range of applications. This
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO DESCRIPTION The TS4264GCW50 is a monolithic integrated low-drop fixed voltage regulator which can supply loads up to 150mA. It is functional
Pin Definition: 1. VCC 8. VB 2. RT 7. HO 3. CT 6. VS 4. COMP 5. LO
DIP-8 SOP-8 Pin Definition: 1. VCC 8. VB 2. RT 7. HO 3. CT 6. VS 4. COMP 5. LO Description is a high voltage, high speed, self-oscillating power MOSFET and IGBT driver with both high and low side referenced
1A Ultra Low Dropout Voltage Regulator with Multi-Functions
1A Ultra Low Dropout Voltage Regulator with Multi-Functions DESCRIPTION The TS39104 are 1A ultra low dropout linear voltage regulators that provide low voltage, high current output from an extremely small
TS mA Low Noise LDO Voltage Regulator with Enable Function
SOT-25 Pin Definiti: 1. Input 2. Ground 3. Enable 4. Bypass / Adjust 5. Output General Descripti TS5205 is an efficient linear voltage regulator with ultra low noise output, very low dropout voltage (typically
N-Channel Power MOSFET 900V, 4A, 4.0Ω
N-Channel Power MOSFET 900V, 4A, 4.0Ω FEATURES Low R DS(ON) 4Ω (Max.) Low gate charge typical @ 25nC (Typ.) Improve dv/dt capability APPLICATION High efficiency switch mode power Supply Lighting KEY PERFORMANCE
TS mA / 1.5MHz Synchronous Buck Converter
SOT-25 Pin Definition: 1. EN 2. Ground 3. Switching Output 4. Input 5. Feedback General Description The TS3406 is a high efficiency monolithic synchronous buck regulator using a 1.5MHz constant frequency,
Not Recommended. TS19702 High Power Factor Corrector LED Driver. Description. Features. Application. Ordering Information
SOT-26 Pin Definition: 1. VCC 2. Ground 3. Output 4. Dimming 5. Compensation 6. Current Sense Description The TS19702 is a highly-integrated, low startup current, average current mode, one cycle control
TS431-Z Adjustable Precision Shunt Regulator
SOT-23 TS431-Z Pin Definition: 1. Reference 2. Cathode 3. Anode TS431AR-Z Pin Definition: 1. Cathode 2. Reference 3. Anode General Description TS431 integrated circuits are three-terminal programmable
TSC873 NPN Silicon Planar High Voltage Transistor
TO-92 Pin Definition: SOT-223 Pin Definition: PRODUCT SUMMARY 1. Emitter 2. Collector 3. Base 1. Base 2. Collector 3. Emitter BV CBO BV CEO I C V CE(SAT) 600V 400V 1A 0.5V @ I C / I B = 500mA / 100mA Features
TSM6866SD 20V Dual N-Channel MOSFET
TSSOP-8 Pin Definition: 1. Drain 1 8. Drain 2 2. Source 1 7. Source 2 3. Source 1 6. Source 2 4. Gate 1 5. Gate 2 PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 30 @ V GS = 4.5V 6.0 20 40 @ V GS = 2.5V
100mA, 75V Switching Diode
ma, 75V Switching Diode FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
TSM V N-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 60 156 @ V GS = 10V 3 192 @ V GS = 4.5V 2.1 Features Advance Trench Process Technology High Density Cell
TSM V P-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 39 @ V GS = -4.5V -4.7-20 52 @ V GS = -2.5V -4.1 68 @ V GS = -1.8V -2.0 Features Advance Trench Process
Not Recommended. TSM V N-Channel MOSFET. PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) Features. Block Diagram. Application
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 30 @ V GS = 10V 5.8 30 43 @ V GS = 4.5V 5.0 Features Advance Trench Process Technology High Density Cell
TS432I Adjustable Precision Shunt Regulator
SOT-23 Pin Definition: 1. Reference 2. Cathode 3. Anode General Description The TS432AI/TS432BI is a three-terminal adjustable shunt regulator with specified thermal stability. The output voltage may be
TSM V P-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 55 @ V GS =-4.5V -3.2-20 80 @ V GS =-2.5V -2.7 130 @ V GS =-1.8V -2.0 Features Advance Trench Process Technology
TSM4936D 30V N-Channel MOSFET
SOP-8 Pin Definition: 1. Source 1 8. Drain 1 2. Gate 1 7. Drain 1 3. Source 2 6. Drain 2 4. Gate 2 5. Drain 2 PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 36 @ V GS = 10V 5.9 30 53 @ V GS = 4.5V 4.9
Glass Passivated Bridge Rectifier
Glass Passivated Bridge Rectifier UR3KB60 - UR3KB00 FEATURES Ideal for printed circuit board High case dielectric strength High surge current capability UL Recognized File # E-326243 Compliant to RoHS
MC78XXE. 3-Terminal 1A Positive Voltage Regulator. Features. Description. Internal Block Digram.
-Terminal A Positive Voltage Regulator www.fairchildsemi.com Features Current up to A Voltages of 5, V Thermal Overload Protection Short Circuit Protection Transistor Safe Operating Area Protection Description
200mW High Speed SMD Switching Diode
200mW High Speed SMD Switching Diode FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 20/65/EU and in accordance to WEEE
1.5A, 1000V Miniature Fast Recovery Glass Passivated Surface Bridge Rectifier
RABS5M.5A, 000 Miniature Fast Recovery Glass Passivated Surface Bridge Rectifier FEATURES - Ideal for automated placement, for compact PCB design - High surge current capability - Ultrafast reverse recovery
SN78xxx. Description TO-252-3L. Application TO-220F-3L ORDERING INFORMATION. Features and Benefits. Equivalent Circuit
3 Terminal 1A Positive oltage Regulator Semiconductor http:// www.auk.co.kr TO-252-3L Description The SN78xxx series are three-terminal positive regulators providing over 1A output current with internal
TSM V P-Channel MOSFET
SOT-26 Pin Definition: 1. Drain 6. Drain 2. Drain 5, Drain 3. Gate 4. Source PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 48 @ V GS = -10V -5.3-30 79 @ V GS = -4.5V -4.1 Features Advance Trench Process
Preliminary TSM9N50 500V N-Channel Power MOSFET
TO-220 ITO-220 Pin Definition: 1. Gate 2. Drain 3. Source PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) 500 0.85 @ V GS =10V 4.8 General Description The TSM9N50 N-Channel enhancement mode Power MOSFET
N-Channel Power MOSFET 150V, 1.4A, 480mΩ
TSM48N5CX6 N-Channel Power MOSFET 5V,.4A, 48mΩ FEATURES Low R DS(ON) to minimize conductive losses Low gate charge for fast power switching Compliant to RoHS directive /65/EU and in accordance to WEEE
NPN Silicon Planar High Voltage Transistor
NPN Silicon Planar High Voltage Transistor FEATURES High BV CEO, BV CBO High current gain Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-Free according to IEC 61249-2-21
200mW, V High Voltage SMD Switching Diode
200mW, 120-250V High Voltage SMD Switching Diode FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 2011/65/EU and in accordance
0.8A, 600V V Glass Passivated Bridge Rectifier
MBS6-K - MBS-K 0.8A, 600V - 00V Glass Passivated Bridge Rectifier FEATURES Ideal for automated placement Reliable low cost construction utilizing molded plastic technique High surge current capability
Linear Constant Current Regulated LED Driver
Linear Constant Current Regulated LED Driver DESCRIPTION The TSCR420 & TSCR421 are Constant Current Regulator (CCR) for linear LED driving. The device regulates with a preset 10mA nominal that can be adjusted
TS19702 High Power Factor Corrector LED Driver
SOT-26 Pin Definition: 1. VCC 2. Ground 3. Output 4. Dimming 5. Compensation 6. Current Sense Description The TS19702 is a highly-integrated, low startup current, average current mode, one cycle control
TS34119 Low Power Audio Amplifier
SOP-8 Pin assignment: 1. CD 8. VO2 2. FC2 7. Gnd 3. FC1 6. Vcc 4. Vin 5. VO1 General Description The TS34119 is a low power audio amplifier, it integrated circuit intended (primarily) for telephone applications,
N-Channel Power MOSFET 600V, 18A, 0.19Ω
N-Channel Power MOSFET 600V, 18A, 0.19Ω FEATURES Super-Junction technology High performance, small R DS(ON) *Q g figure of merit (FOM) High ruggedness performance 100% UIS tested High commutation performance
N-Channel Power MOSFET 600V, 11A, 0.38Ω
N-Channel Power MOSFET 600V, 11A, 0.38Ω FEATURES Super-Junction technology High performance due to small figure-of-merit High ruggedness performance High commutation performance Pb-free plating Compliant
N-Channel Power MOSFET 100V, 160A, 5.5mΩ
N-Channel Power MOSFET 100V, 160A, 5.5mΩ FEATURES Advanced Trench Technology Low R DS(ON) 5.5mΩ (Max.) Low gate charge typical @ 154nC (Typ.) Low Crss typical @ 260pF (Typ.) KEY PERFORMANCE PARAMETERS
Switching Diode SYMBOL. Peak reverse voltage 100 DC blocking voltage Non-repettive peak forward current 300 I FSM. A Power dissipation P D 200
Switching Diode FEATURES - Surface Mounted Device - Fast Switching Speed - Moisture sensitivity level (MSL): - Pb free and RoHS compliant MECHANICAL DATA - Case: Bend lead package - High temperature soldering
200W, 5V - 100V Surface Mount Transient Voltage Suppressor
200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I
TSM V N-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain Key Parameter Performance Parameter Value Unit V DS 20 V V GS = 4.5V 33 R DS(on) (max) V GS = 2.5V 40 V GS = 1.8V 51 mω Q g 11 nc Features Advance Trench
NPN Silicon Planar High Voltage Transistor
NPN Silicon Planar High Voltage Transistor FEATURES High BV CEO, BV CBO High current gain Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-Free according to IEC 61249-2-21
10A, 100V - 200V Trench Schottky Rectifier
A, 0V - 200V Trench Schottky Rectifier TSDH0CW - TSDH200CW FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ high efficiency
L78. Positive voltage regulator ICs. Description. Features
Positive voltage regulator ICs Datasheet - production data Features Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V Thermal overload protection Short circuit protection
TSM V P-Channel MOSFET
SOT-26 Pin Definition: 1. Drain 6. Drain 2. Drain 5, Drain 3. Gate 4. Source PRODUCT SUMMARY V DS (V) R DSON (mω) I D (A) 20 60 @ VGS = -4.5V -4.7 100 @ VGS = -2.5V -3.8 Features Advance Trench Process
2A, 800V V Glass Passivated High Efficient Rectifier
2A, 800V - 1000V Glass Passivated High Efficient Rectifier FEATURES Glass passivated chip junction High efficiency, Low V F High current capability High surge current capability Low power loss Compliant
0.3W, PNP Plastic-Encapsulate Transistor
0.3W, PNP Plastic-Encapsulate Transistor FEATURES Low power loss, high efficiency Ideal for automated placement High surge current capability Compliant to RoHS directive 2011/65/EU and in accordance to
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
Dual N-Channel MOSFET 30V, 20A, 20mΩ
Dual N-Channel MOSFET 30V, 20A, 20mΩ FEATURES Fast switching 100% avalanche tested Pb-free plating RoHS compliant Halogen-free package APPLICATION Power Supply Motor COntrol KEY PERFORMANCE PARAMETERS
TS mA High Voltage Adjustable Current Regulator With Enable Control
SOP-8EP Pin Definition: 1. GND 8. OUT 2. GND 7. OUT 3. VDD 6. NC 4. ISET 5. OE General Description The is a high voltage, low dropout current regulator of maximum output current up to 400mA. The output
Not Recommended. TSM V P-Channel MOSFET. PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) Features. Block Diagram. Application
SOP-8 Pin Definition: 1. Source 8. Drain 2. Source 7. Drain 3. Source 6. Drain 4. Gate 5. Drain PRODUCT SUMMARY V DS (V) R DS(on) (mω) I D (A) 14 @ V GS = -10V -11-30 20 @ V GS = -4.5V -8.5 Features Advance
TSM6N50 500V N-Channel Power MOSFET
ITO-220 TO-252 (DPAK) Features Low R DS(ON) 1.4Ω (Max.) TO-251 (IPAK) Low gate charge typical @ 25nC (Typ.) Low Crss typical @ 15pF (Typ.) Fast Switching Ordering Information Part No. Package Packing TSM6N50CI
TS3410 1A / 1.4MHz Synchronous Buck Converter
SOT-25 Pin Definition: 1. EN 2. Ground 3. Switching Output 4. Input 5. Feedback General Description TS3410 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current
20A, 300V Trench Schottky Rectifier
20A, 300V Trench Schottky Rectifier FEATURES Patented Trench Schottky technology Excellent high temperature stability Low forward voltage Low power loss/ High efficiency High forward surge capability Compliant
4 1N5400G-K - 1N5408G-K Taiwan Semiconductor. 3A, 50V V Glass Passivated Rectifier
4 1N5400-1N5408 3A, 50V - 0V Glass Passivated Rectifier FEATURES Glass passivated chip junction High current capability, Low V F High reliability High surge current capability Low power loss, high efficiency
LM317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com 3-Terminal 0.5A Positive Adjustable Regulator Features Output Current in Excess of 0.5A Output Adjustable Between 1.2V and 37V Internal Thermal Overload Protection Internal Short
10A, 100V - 200V Trench Schottky Rectifier
- TSSDL200SW A, 0V - 200V Trench Schottky Rectifier FEATURES Patented Trench Schottky technology Low power loss / high efficiency Ideal for automated placement Guard ring for over-voltage protection High
TSM2307CX 30V P-Channel MOSFET
SOT-23 Pin Definition: 1. Gate 2. Source 3. Drain Key Parameter Performance Parameter Value Unit V DS -30 V V GS = -10V 95 R DS(on) (max) mω V GS = -4.5V 140 Q g 10 nc Features Advance Trench Process Technology
30A, 100V - 200V Trench Schottky Rectifiers
30A, 0V - 200V Trench Schottky Rectifiers TSD30H0CW - FEATURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ High efficiency - High