SN78xxx. Description TO-252-3L. Application TO-220F-3L ORDERING INFORMATION. Features and Benefits. Equivalent Circuit

Transcription

1 3 Terminal 1A Positive oltage Regulator Semiconductor TO-252-3L Description The SN78xxx series are three-terminal positive regulators providing over 1A output current with internal current limiting, thermal shutdown and safe area protection. These regulators are useful in a wide range of applications. Although they are just fixed voltage regulators, the SN78xxx series can be used with external components to obtain adjustable voltages and Currents. TO-220F-3L Application Consumer and personal electronics SMPS post-regulator / dc-to-dc modules High-efficiency linear power supplies ORDERING INFORMATION Product Marking Package SN78xxD SN78xxD TO-252-3L SN78xxPI SN78xxPI TO-220F-3L Marking Detail Information [ TO-220F-3L ] AUK(1) G YMD (2) SN78xxPI (3) Features and Benefits Output Current up to 1.0A Output oltage : 5, 6, 8, 9, 10, 12, 15, 18, 24 Built in OP, CLP circuit. Built in TSD Protection. Output Transistor Safe Area Protection. Ultra High level of ESD [ Built in ESD Protection Cell ] MM : 500 / HBM 5K Equivalent Circuit 1 AUK Logo 2 Grade & M Code & Y & M & D 3 Device Code [ TO-252-3L] SN78xxD (1) YWW (2) 1 Device Code 2 Year & Week Code KSD-I0O

2 Pin Configuration TO-252-3L 1: IN 2: GND 3: OUT 4: GND TO-220F-3L 1: IN 2: GND 3: OUT Product Line-up Product Name OUT Operating Junction Temperature Package SN7805D ~125 TO-252-3L SN7806D ~125 TO-252-3L SN7808D ~125 TO-252-3L SN7809D ~125 TO-252-3L SN7810D 10-40~125 TO-252-3L SN7812D 12-40~125 TO-252-3L SN7815D 15-40~125 TO-252-3L SN7818D 18-40~125 TO-252-3L SN7824D 24-40~125 TO-252-3L SN7805PI ~125 TO-220F-3L SN7806PI ~125 TO-220F-3L SN7808PI ~125 TO-220F-3L SN7809PI ~125 TO-220F-3L SN7810PI 10-40~125 TO-220F-3L SN7812PI 12-40~125 TO-220F-3L SN7815PI 15-40~125 TO-220F-3L SN7818PI 18-40~125 TO-220F-3L SN7824PI 24-40~125 TO-220F-3L KSD-I0O

3 Absolute Maximum Ratings ( Ta = 25 ) Parameter Symbol TO-220F-3L Limits TO-252-3L Input oltage IN 40.0 ( O =24 ) 35.0 ( O =5 to 18 ) Power Dissipation P d W Thermal Resistance Junction to Case R ΘJC 5 5 C/W Thermal Resistance Junction to Air R ΘJA C/W Junction Temperature T J 150 C Operating Junction Temperature Range T opr -40 ~ +125 C Storage Temperature Range T stg -55 ~ +150 C Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, T J(max), the junction-to-ambient thermal resistance, θ JA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated using: PD(max) = (T J(max) T A ) θ JA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. KSD-I0O

4 Electrical characteristics ( IN =10, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7805x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 7.0 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 7.0 IN mA I O 1.0A ma Ripple Rejection RR 8.0 IN 18.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

5 Electrical characteristics ( IN =11, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7806x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 8.0 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 8.0 IN mA I O 1.0A ma Ripple Rejection RR 9.0 IN 19.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

6 Electrical characteristics ( IN =14, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7808x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 10.5 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 10.5 IN mA I O 1.0A ma Ripple Rejection RR 11.5 IN 21.5 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35, T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

7 Electrical characteristics ( IN =15, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7809x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 11.5 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 11.5 IN mA I O 1.0A ma Ripple Rejection RR 12.0 IN 22.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

8 Electrical characteristics ( IN =16, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7810x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 12.5 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 12.5 IN mA I O 1.0A ma Ripple Rejection RR 13.0 IN 23.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35, T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

9 Electrical characteristics ( IN =19, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7812x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 14.5 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 14.5 IN mA I O 1.0A ma Ripple Rejection RR 15.0 IN 25.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

10 Electrical characteristics ( IN =23, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7815x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 17.5 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 17.5 IN mA I O 1.0A ma Ripple Rejection RR 18.5 IN 28.5 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

11 Electrical characteristics ( IN =27, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7818x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 21.0 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 21.0 IN mA I O 1.0A ma Ripple Rejection RR 22.0 IN 32.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

12 Electrical characteristics ( IN =33, C IN = 0.33uF, C OUT = 0.1 uf, I OUT = 500mA, T J =0 ~125 ; unless otherwise specified ) Characteristic Symbol Test Condition* SN7824x Min. Typ. Max. Output oltage** O IN mA I O 1.0A, P D 15W Line Regulation O( I) 27.0 IN IN O( IL) 5.0mA I O 1.5A mA I O 750mA Quiescent Current I QC ma Quiescent Current Change I QC 27.0 IN mA I O 1.0A ma Ripple Rejection RR 28.0 IN 38.0 f=120hz db Dropout oltage DROP I O =1.0A Output Noise oltage N 10Hz f 100kHz T A = u/ O Output Resistance r O f=1.0khz mω Short Circuit Current I SC I =35 T A = ma Peak Output Current I PK A Temperature coefficient of Output voltage O / Temp I O =5.0mA / C * Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into separately. ** This specification applies only for dc power dissipation permitted by absolute maximum ratings. KSD-I0O

13 Typical Application Fixed Output Regulator SN78xxx + IN R L OUT C IN C O 1) C IN should be required if regulators are located far from power supply filter 2) C O improves output stability and transient response SN78xxx + IN C IN R L OUT STC4350F C C 0 Constant Current Regulator SN78xxx OUT IN C IN I Q C O R 1 1 I O R L I O = 1 R 1 + I Q KSD-I0O

14 Adjustable Output Regulator SN78xxx + IN C IN SN321 + R C O OUT High Current oltage Regulator Q 1 STA723D R IN IN SN78xxx + I IN I O C IN C O OUT I O = I IN + β Q1 (I IN BEQ1 / R IN ) KSD-I0O

15 Fig.1 Quiescent Current vs. Junction Temperature Fig.2 Output Peak Current vs. Input to Output Differential Fig.3 Output oltage vs. Junction Temperature Fig.4 Dropout oltage vs. Junction Temperature Fig.5 Line Transient Response Fig.6 Load Transient Response Output oltage Deviation [] INPUT OLTAGE OUTPUT OLTAGE DEIATION Cin=0.33uF, Cout=0.1uF Iout=5mA, T A = Time [ms] Load Current [A] OUTPUT OLTAGE DEIATION LOAD CURRENT Time [µs] Cin=0.33uF, Cout=0.1uF o=5, T A =25 KSD-I0O

16 TO-252-3L Outline Dimension ( : mm) Θ Θ Θ Θ Recommend PCB solder land [: mm] KSD-I0O

17 TO-220F-3L Outline Dimension ( : mm) KSD-I0O

18 The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-I0O