TS V MICROPOWER SHUNT VOLTAGE REFERENCE 2.5V OUTPUT VOLTAGE ULTRA LOW CURRENT CONSUMPTION:
|
|
|
- John Tucker
- 5 years ago
- Views:
Transcription
1 2.5V MICROPOWER SHUNT VOLTAGE REFERENCE 2.5V OUTPUT VOLTAGE ULTRA LOW CURRENT CONSUMPTION: 4µA TYP. HIGH 25 C ±2% and ±1% HIGH STABILITY WHEN USED WITH CAPACITIVE LOAD INDUSTRIAL TEMPERATURE RANGE: -4 to +85 C 15ppm/ C MAXIMUM TEMPERATURE COEFFICIENT Z TO92 (Plastic Package) DESCRIPTION The TS44 is a low power shunt voltage reference providing a stable 2.5V output voltage over the industrial temperature range (-4 to +85 C). Available in SOT23-3 surface mount package, it can be designed in applications where space saving is a critical issue. The low operating current is a key advantage for power restricted designs. In addition, the TS44 is very stable and can be used in a broad range of application conditions. L SOT23-3L (Plastic Micropackage) PIN CONNECTIONS (top view) APPLICATION Computers Instrumentation Battery chargers Switch Mode Power Supply Battery operated equipments ORDER CODE Precision TO92 SOT23-3 SOT23 Marking 2% TS44EIZ-2.5 TS44EILT-2.5 L243 1% TS44DIZ-2.5 TS44DILT-2.5 L242 Single temperature range: -4 to +85 C Z = TO92 Plastic package - also available in Bulk (Z), Tape & Reel (ZT) and Ammo Pack (AP) LT = Tiny Package (SOT23-3) - only available in Tape & Reel (LT) March 22 1/1
2 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit I k Reverse Breakdown Current 2 ma I f Forward Current 1 ma P d Power Dissipation 1) SOT23-3 TO92 T std Storage Temperature -65 to +15 C ESD Human Body Model (HBM) 2 kv Machine Model (MM) 2 V Tlead Lead Temperatue (soldering, 1 seconds) 26 C 1. Pd has been calculated with Tamb = 25 C, Tjunction =15 C andrthja = 2 C/W for the TO92 package Rthja = 34 C/W for the SOT23-3 package OPERATING CONDITIONS Symbol Parameter Value Unit I kmin Minimum Operating Current 6 µa I kmax Maximum Operating Current 15 ma T oper Operating Free Air Temperature Range -4 to +85 C mw 2/1
3 ELECTRICAL CHARACTERISTICS TS44E (2% Precision) Tamb = 25 C (unless otherwise specified) Symbol Parameter Test Condition Min. Typ. Max. Unit Reverse Breakdown Voltage Ik = 1µA V Vk Ik = 1µA -5 5 Reverse Breakdown Voltage Tolerance mv Ikmin Minimum Operating Current T = 25 C µa Vref/ T Average Temperature Coefficient Ik = 1µA 3 15 ppm/ C Vk/ Ik Rka Reverse Breakdown Voltage Change with Operating Current Range Reverse Static Impedance Ikmin < Ik < 1mA 1mA < Ik < 15mA Ik = Ikmin to 1mA Ik = 1 to 15mA Kvh Long Term Stability Ik = 1µA, t = 1hrs 12 ppm En Wide Band Noise Ik = 1µA 1Hz < f < 1kHz 35 µvrms mv Ω Note: Limits are 1% production tested at 25 C. Limits over temperature are guaranteed through correlation and by design. ELECTRICAL CHARACTERISTICS TS44D (1% Precision) Tamb = 25 C (unless otherwise specified) Symbol Parameter Test Condition Min. Typ. Max. Unit Reverse Breakdown Voltage Ik = 1µA V Vk Ik = 1µA Reverse Breakdown Voltage Tolerance mv Ikmin Minimum Operating Current T = 25 C µa Vref/ T Average Temperature Coefficient Ik = 1µA 3 15 ppm/ C Vk/ Ik Rka Reverse Breakdown Voltage Change with Operating Current Range Reverse Static Impedance Ikmin < Ik < 1mA 1mA < Ik < 15mA Ik = Ikmin to 1mA Ik = 1mA to 15mA Kvh Long Term Stability Ik = 1µA, t = 1hrs 12 ppm En Wide Band Noise Ik = 1µA 1Hz < f < 1kHz 35 µvrms mv Ω Note: Limits are 1% production tested at 25 C. Limits over temperature are guaranteed through correlation and by design. 3/1
4 Reference voltage versus cathode current 15 3 Minimum operating current Cathode current (ma) 1 5 Cathode voltage (V) T=+25 C T=+85 C T=-4 C Cathode voltage (V) 2 4 Cathode current (µa) 2.58 Test circuit % Vin R Ik=(Vin-Vref)/R Vout=Vref Cathode voltage (V) % -1% % Temperature ( C) Static impedance (Ohms) Static impedance (Rka) versus temperature Noise voltage (nv/vhz) Noise voltage versus Frequency CL=1µF CL=1µF CL=1µF CL=1nF CL= Temperature ( C) Frequency (KHz) 1. 4/1
5 5 Pulse response for Ik=1µA Test circuit for pulse response at Ik=1µA 25k ohm Ik=1µA Pulse Generator Intput Time (µs) Pulse response for Ik=1µA Detailed part Pulse response for Ik=1µA Detailed part 5V 5V 2.5V 2.5V Time (µs) Time (µs) Pulse response for Ik=1mA Test circuit for pulse response at Ik=1mA 2.5k ohm 5V Ik=1mA Pulse Generator Intput 2.5V Time (µs) 5/1
6 Pulse response for Ik=1mA Detailed part Pulse response for Ik=1mA Detailed part 5V 5V 2.5V 2.5V Time (ns) Time (µs) 6/1
7 PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (TAPE & REEL) P A1 P T H L1 H1 H A d W W W1 I1 H W2 D F1 F2 P2 P Millimeters Inches Dim. Min Typ. Max. Min. Typ. Max. AL A T d I P PO P F1/F h P W W W W2.5.2 H H H DO L /1
8 PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (TAPE AMMO PACK) A1 P P T H L1 H1 H A d W W W1 I1 H W2 D F1 F2 P2 P Millimeters Inches Dim. Min Typ. Max. Min. Typ. Max. AL A T d I P PO P F1/F h P W W W W2.5.2 H H H DO L /1
9 PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (BULK) Millimeters Inches Dim. Min Typ. Max. Min. Typ. Max. L B O C K O a /1
10 PACKAGE MECHANICAL DATA 3 PINS - TINY PACKAGE (SOT23) D e GAUGE PLANE.25 k b e1 A1 A2.1 C A E E1 L L1 c SEATING PLANE C Millimeters Inches Dimensions Min. Typ. Max. Min. Typ. Max. A A A b c D E E e e L L k 8 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 1/1 22 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States - United Kingdom
TS HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE
HIGH THERMAL STABILITY MICROPOWER SHUNT VOLTAGE REFERENCE LOW Tc: ppm/ C MAXIMUM.V OUTPUT VOLTAGE LOW OPERATING CURRENT: 6µA max @ C HIGH PRECISION AT C: ±.% AND ±% STABLE WHEN USED WITH CAPACITIVE LOADS
TS V micropower shunt voltage reference. Features. Applications. Description
2. micropower shunt voltage reference Features 2.5 typical output voltage Ultra low current consumption: 4µA typ. High precision @ 25 C ±2% (standard version) ±1% (A grade) High stability when used with
TS2431. Programmable shunt voltage reference. Features. Applications. Description
Programmable shunt voltage reference Datasheet production data Features Adjustable output voltage:.5 to 4 V Precision selection at 5 C: ± %, ± 1% and ±.5% Sink current capability: 1 to 1 ma Industrial
LM135 LM235 - LM335,A
LM135 LM235 - LM335,A PRECISION TEMPERATURE SENSORS DIRECTLY CALIBRATED IN K 1 C INITIAL ACCURACY OPERATES FROM 450µA TO 5mA LESS THAN 1Ω DYNAMIC IMPEDANCE DESCRIPTION The LM135, LM235, LM335 are precision
TS834 MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER
MICROPOWER VOLTAGE SUPERVISOR RESET ACTIVE LOW OR HIGH INTEGRATED TIMER ULTRA LOW POWER CONSUMPTION : 12µA max. @ V CC = 5V BOTH ACTIVE HIGH AND ACTIVE LOW OUTPUTS RESET TIMER WITH DISABLE FUNCTION PRECISION
LM134 LM234 - LM334 THREE TERMINAL ADJUSTABLE CURRENT SOURCES
LM134 LM234 - LM334 THREE TERMINAL ADJUSTABLE CURRENT SOURCES OPERATES FROM 1V TO 40V 0.02%/V CURRENT REGULATION PROGRAMMABLE FROM 1µA TO 10mA ±3% INITIAL ACCURACY DESCRIPTION The LM134/LM234/LM334 are
LM4041. Precision micropower shunt voltage reference. Description. Features. Applications
Precision micropower shunt voltage reference Description Datasheet - production data SOT23-3L Features SOT323-5L Fixed 1.225 V typical output voltage Ultra low operating current: 40 µa at 25 C High precision:
BZW06-5V8/376 BZW06-5V8B/376B
BZW06-5V8/376 BZW06-5V8B/376B TRANSIL TM FEATURES PEAK PULSE POWER : 600 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 5.8V to 376 V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL
Symbol Parameter Value Unit. Maximum lead temperature for soldering during 10s at 5mm from case
BZW50-10,B/180,B TRANSIL TM FEATURES PEAK PULSE POWER : 5000 W (10/1000µs) STAND-OFF VOLTAGE RANGE : From 10V to 180V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED DESCRIPTION
ESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. ESDA6V1U1 TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : COMPUTERS PRINTERS
Obsolete Product(s) - Obsolete Product(s) Obsolete Product(s) - Obsolete Product(s) STG3684
LOW VOLTAGE 0.5Ω MAX DUAL SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 3.0V t PD = 0.4ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS
NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz TIMING FROM MICROSECONDS TO HOURS OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
Obsolete Product(s) - Obsolete Product(s)
SINGLE 2-INPUT NAND GATE 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.7ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT
Obsolete Product(s) - Obsolete Product(s)
MMBT2222A APPLICATIONS WELL SUITABLE FOR PORTABLE EQUIPMENT SMALL LOAD SWITCH TRANSISTOR WITH HIGH GAIN AND LOW SATURATION OLTAGE SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Type Marking MMBT2222A M22
Obsolete Product(s) - Obsolete Product(s)
BYT 30P-1000 FAST RECOVERY RECTIFIER DIODE VERY HIGH REVERSE VOLTAGE CAPABILITY VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING SUITABLE APPLICATIONS FREE WHEELING
Obsolete Product(s) - Obsolete Product(s)
TRIPLE 3-INPUT NOR GATE HIGH SPEED: t PD = 4.1 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
74LX1G132CTR SINGLE 2-INPUT SCHMITT NAND GATE
SINGLE 2-INPUT SCHMITT NAND GATE 5V TOLERANT INPUTS HIGH SPEED: t PD = 5.5ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C TYPICAL HYSTERESIS: V h =1V at V CC =4.5V POWER DOWN PROTECTION
Obsolete Product(s) - Obsolete Product(s)
PN2222A ABSOLUTE MAXIMUM RATINGS SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Ordering Code Marking Package / Shipment PN2222A PN2222A TO-92 / Bulk PN2222A-AP PN2222A TO-92 / Ammopack SILICON EPITAXIAL
TDA7231A 1.6W AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION SOFT CLIPPING
1.6 AUDIO AMPLIFIER OPERATING VOLTAGE 1.8 TO 15 V LO QUIESCENT CURRENT. HIGH POER CAPABILITY LO CROSSOVER DISTORTION SOFT CLIPPING DESCRIPTION The is a monolithic integrated circuit in 4 + 4 lead minidip
Obsolete Product(s) - Obsolete Product(s)
SINGLE 2-INPUT NOR GATE HIGH SPEED: t PD = 3.6ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS
Inverting Input 1. Non-inverting Input 1
Micropower Dual CMOS Voltage Comparators Extremely low supply current: 9µa typ/comp. Wide single supply range 2.7V to 6V or dual supplies (±.35V to ±8V) Extremely low input bias current: pa typ. Extremely
74V1T07CTR SINGLE BUFFER (OPEN DRAIN)
SINGLE BUFFER (OPEN DRAIN) HIGH SPEED: t PD = 4.3ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN PROTECTION
74LVX05 LOW VOLTAGE CMOS HEX INVERTER (OPEN DRAIN) WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS HEX INVERTER (OPEN DRAIN) WITH 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.8ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS INPUT VOLTAGE LEVEL: V IL =0.8V, V IH =2V at V CC =3V LOW POWER DISSIPATION:
74VHC20 DUAL 4-INPUT NAND GATE
DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 3.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
Obsolete Product(s) - Obsolete Product(s)
SINGLE INVERTER (OPEN DRAIN) HIGH SPEED: t PD = 3.7ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
MMBT2222A SMALL SIGNAL NPN TRANSISTOR
SMALL SIGNAL NPN TRANSISTOR PRELIMINARY DATA Type Marking M22 SILICON EPITAXIAL PLANAR NPN TRANSISTOR MINIATURE SOT-23 PLASTIC PACKAGE FOR SURFACE MOUNTING CIRCUITS TAPE & REEL PACKING THE PNP COMPLEMENTARY
74V1G00CTR SINGLE 2-INPUT NAND GATE
SINGLE 2-INPUT NAND GATE HIGH SPEED: t PD = 3.7ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS
Obsolete Product(s) - Obsolete Product(s)
SINGLE SCHMITT INERTER HIGH SPEED: t PD = 4.3ns (TYP.) at CC =5 LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C TYPICAL HYSTERESIS: h =1 at CC =4.5 POWER DOWN PROTECTION ON INPUT SYMMETRICAL OUTPUT
STG719 LOW VOLTAGE 4Ω SPDT SWITCH
LOW VOLTAGE 4Ω SPDT SWITCH HIGH SPEED: t PD = 0.3ns (TYP.) at V CC = 5V t PD = 0.4ns (TYP.) at V CC = 3.3V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C LOW "ON" RESISTANCE: R ON = 4Ω (MAX. T A
Obsolete Product(s) - Obsolete Product(s)
HEX INVERTER (SINGLE STATE) HIGH SPEED: t PD = 5ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 10% V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74V1T00CTR SINGLE 2-INPUT NAND GATE
SINGLE 2-INPUT NAND GATE HIGH SPEED: t PD = 5.0ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V(MIN),V IL =0.8V(MAX) POWER DOWN PROTECTION
Obsolete Product(s) - Obsolete Product(s)
SINGLE 2-INPUT NAND GATE HIGH SPEED: t PD = 5.0ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V(MIN),V IL =0.8V(MAX) POWER DOWN PROTECTION
74V1G77CTR SINGLE D-TYPE LATCH
SINGLE D-TYPE LATCH HIGH SPEED: t PD = 4.4ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS SYMMETRICAL
Obsolete Product(s) - Obsolete Product(s)
P-CHANNEL 20V - 0.065Ω - 5ASOT23-6L 2.5V-DRIVE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STT5PF20V 20 V < 0.080 Ω (@4.5V)
74V2G66STR DUAL BILATERAL SWITCH
DUAL BILATERAL SWITCH HIGH SPEED: t PD = 0.3ns (TYP.) at V CC =5V t PD = 0.4ns (TYP.) at V CC =3.3V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A = 25 C LOW "ON" RESISTANCE: R ON =6.5Ω (TYP.) AT V CC =5VI
HCF4070B QUAD EXCLUSIVE OR GATE
QUAD EXCLUSIVE OR GATE MEDIUM-SPEED OPERATION t PHL =t PLH = 70ns (Typ.) at CL = 50 pf and V DD = 10V QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I
HCF4050B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME : t PD = 40ns (TYP.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION HIGH "SINK" AND "SOURCE" CURRENT CAPABILITY QUIESCENT CURRENT
TEB1033 TEF1033-TEC1033
TEB1033 TEF1033-TEC1033 PRECISION DUAL OPERATIONAL AMPLIFIERS VERY LOW INPUT OFFSET VOLTAGE : 1mV max. LOW DISTORTION RATIO LOW NOISE VERY LOW SUPPLY CURRENT LOW INPUT OFFSET CURRENT LARGE COMMON-MODE
TL1431. Programmable voltage reference. Features. Description
Programmable voltage reference Features Adjustable output voltage: V REF to 36 V Sink current capability: 1 to 100 ma Typical output impedance: 0.22 Ω 0.4% and 0.25% voltage precision Description The TL1431
TS2431. Adjustable shunt voltage reference. Applications. Description. Features
Adjustable shunt voltage reference Datasheet - production data Industrial temperature range: - 40 to + 105 C Performance compatible with industrystandard TL431 Applications Computers Instrumentation Battery
74V1G79CTR SINGLE POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP
SINGLE POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP HIGH SPEED: f MAX = 180MHz (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER
74VHC08 QUAD 2-INPUT AND GATE
QUAD 2-INPUT AND GATE HIGH SPEED: t PD = 4.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
TSM100 SINGLE OPERATIONAL AMPLIFIER AND SINGLE COMPARATOR
OPERATIONAL AMPLIFIER LOW INPUT OFFSET VOLTAGE : 0.5 typ. MEDIUM BANDWIDTH (unity gain) : 0.9MHz LARGE OUTPUT VOLTAGE SWING : 0V to (V CC - 1.5V) INPUT COMMON MODE VOLTAGE RANGE INCLUDES GROUND WIDE POWER
L4941 VERY LOW DROP 1A REGULATOR
VERY LOW DROP 1A REGULATOR LOW DROPOUT VOLTAGE (450mV Typ. at 1A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY PROTECTION DESCRIPTION The L4941 is a three terminal
ESDALC6V1W5. Quad TRANSIL array for data protection. Main applications. Features. Description. Benefits SOT323-5L. Order codes
Quad TRANSIL array for data protection Main applications Where transient overvoltage protection in ESD sensitive equipment is required, such as : Computers Printers Communication systems Cellular phones
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT AND GATE HIGH SPEED: t PD = 4.7 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER DOWN PROTECTION
74V1T126CTR SINGLE BUS BUFFER (3-STATE)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.6ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN
TDA7241B 20W BRIDGE AMPLIFIER FOR CAR RADIO
TDA7241B 20W BRIDGE AMPLIFIER FOR CAR RADIO VERY LOW STAND-BY CURRENT GAIN = 32dB OUTPUT PROTECTED AGAINST SHORT CIRCUITS TO GROUND AND ACROSS LOAD COMPACT HEPTAWATT PACKAGE DUMP TRANSIENT THERMAL SHUTDOWN
74VHCT00ATTR QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 5 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER DOWN PROTECTION
LD3985 SERIES ULTRA LOW DROP-LOW NOISE BICMOS VOLTAGE REGULATORS LOW ESR CAPACITORS COMPATIBLE
LD3985 SERIES ULTRA LOW DROP-LOW NOISE BICMOS VOLTAGE REGULATORS LOW ESR CAPACITORS COMPATIBLE INPUT VOLTAGE FROM 2.5V TO 6V STABLE WITH LOW ESR CERAMIC CAPACITORS ULTRA LOW DROPOUT VOLTAGE (100mV TYP.
LM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
LM193 LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS
LM293 - LM393 LOW POWER DUAL VOLTAGE COMPARATORS WIDE SINGLE SUPPLY VOLTAGE RANGE OR DUAL SUPPLIES : +2V TO +36V OR ±V TO ±8V VERY LOW SUPPLY CURRENT (.4mA) INDEPENDENT OF SUPPLY VOLTAGE (mw/comparator
TSM104W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS
TSM14W/A QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET
74AC10B TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
TL061 TL061A - TL061B
TL61 TL61A - TL61B LOW POWER J-FET SINGLE OPERATIONAL AMPLIFIERS VERY LOW POWER CONSUMPTION : µa WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGES LOW INPUT BIAS AND OFFSET CURRENTS OUTPUT
L4940 SERIES VERY LOW DROP 1.5A REGULATORS
L4940 SERIES VERY LOW DROP 1.5A REGULATORS PRECISE 5, 8.5, 10, 12V OUTPUTS LOW DROPOUT VOLTAGE (500mV Typ. at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY
74AC00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
UA748 PRECISION SINGLE OPERATIONAL AMPLIFIER
PRECISION SINGLE OPERATIONAL AMPLIFIER INPUT OFFSET VOLTAGE : 3mV max. OVER TEMPERATURE FREQUENCY COMPENSATION WITH A SINGLE 30pF CAPACITOR (C1) OPERATION FROM ±5V to ±15V LOW POWER CONSUMPTION : 50mW
74LVX257 LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER (3-STATE) WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER (3-STATE) WITH 5V TOLERANT INPUTS HIGH SPEED: t PD =5.8ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS POWER-DOWN PROTECTION ON INPUTS INPUT VOLTAGE LEVEL: V IL
Obsolete Product(s) - Obsolete Product(s)
SINGLE POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP HIGH SPEED: f MAX = 180MHz (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V(MIN),V IL =0.8V(MAX)
PB137 POSITIVE VOLTAGE REGUALTOR FOR BATTERY CHARGER REVERSE LEAKAGE CURRENT LESS THAN
PB137 POSITIVE VOLTAGE REGUALTOR FOR BATTERY CHARGER REVERSE LEAKAGE CURRENT LESS THAN 10 µa THREE TERMINAL FIXED VERSION (13.7V) OUTPUT CURRENT IN EXCESS OF 1.5A AVAILABLEIN ± 1% (AC) SELECTION AT 25
TS431. Adjustable shunt voltage reference IC (automotive for SOT23-5) Description. Features. Z TO92 (plastic package)
Adjustable shunt voltage reference IC (automotive for SOT235) Datasheet production data Z TO92 (plastic package) L SOT235 (plastic micropackage) Description The TS431 is a lowvoltage, threeterminal, adjustable
74ACT00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4.5ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.) 50Ω TRANSMISSION
TDA1151 MOTOR SPEED REGULATOR
MOTOR SPEED REGULATOR EXCELLENT VERSATILITY IN USE HIGH OUTPUT CURRENT (UP TO 800mA) LOW QUIESCENT CURRENT (1.7mA) LOW REFERENCE VOLTAGE (1.2V) EXCELLENT PARAMETERS STABILITY VERSUS TEMPERATURE DESCRIPTION
74LVX132TTR LOW VOLTAGE CMOS QUAD 2-INPUT SCHMITT NAND GATE WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2-INPUT SCHMITT NAND GATE WITH 5V TOLERANT INPUTS HIGH SPEED : t PD = 5.9ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C TYPICAL
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
LDRxxyy VERY LOW DROP DUAL VOLTAGE REGULATOR
VERY LOW DROP DUAL VOLTAGE REGULATOR OUTPUT CURRENT 1 UP TO 500mA OUTPUT CURRENT 2 UP TO 1.0A LOW DROPOUT VOLTAGE 1 (0.3V @ I O =500mA) LOW DROPOUT VOLTAGE 2 (0.4V @ I O =1A) VERY LOW SUPPLY CURRENT (TYP.50µA
LM723 HIGH PRECISION VOLTAGE REGULATOR
HIGH PRECISION VOLTAGE REGULATOR INPUT VOLTAGE UP TO 40V OUTPUT VOLTAGE ADJUSTABLE FROM 2 TO 37V POSITIVE OR NEGATIVE SUPPLY OPERATION SERIES, SHUNT, SWITCHING OR FLOATING OPERATION OUTPUT CURRENT TO 150mA
Obsolete Product(s) - Obsolete Product(s)
HEX INVERTER (OPEN DRAIN) HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) WIDE OPERATING VOLTAGE RANGE:
M74HC51TTR DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE
DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE HIGH SPEED: t PD = 11ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
STD12NF06L N-CHANNEL 60V Ω - 12A IPAK/DPAK STripFET II POWER MOSFET
N-CHANNEL 60V - 0.08 Ω - 12A IPAK/DPAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D 60 V < 0.1 Ω 12 A TYPICAL R DS (on) = 0.08 Ω EXCEPTIONAL dv/dt CAPABILITY LOW GATE CHARGE LOW THRESHOLD DRIVE THROUGH-HOLE
t p = 10 ms T j initial = T amb
P6KE TRANSIL FEATURES Peak pulse power: 600 W (/0 µs ) Stand-off voltage range 6.8 to 440V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil
STD10NF10 N-CHANNEL 100V Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET
N-CHANNEL 100V - 0.115 Ω - 13A IPAK/DPAK LOW GATE CHARGE STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STD10NF10 100 V
M74HC10TTR TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 8ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 8ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
TS931ILT/AILT/BILT SOT23-5L Tape & Reel
Output Rail-to-Rail Micropower Operational Amplifiers n Rail-to-rail output voltage swing n Micropower consumption (µa) n Single supply operation (.7V to V n Low offset (mv max for TS93xB) n CMOS inputs
STG3699AQTR LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE
LOW VOLTAGE 0.5Ω MAX QUAD SPDT SWITCH WITH BREAK-BEFORE-MAKE FEATURE HIGH SPEED: t PD = 1.5ns (TYP.) at V CC = 3.0V t PD = 1.5ns (TYP.) at V CC = 2.3V ULTRA LOW POWER DISSIPATION: I CC = 0.2µA (MAX.) at
74LCX257 LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER WITH 5V TOLERANT INPUTS AND OUTPUTS (3-STATE)
LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER WITH 5V TOLERANT INPUTS AND OUTPUTS (3-STATE) 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED: t PD = 6.0 ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND
DIP14 Tube LM2901N LM2901D/LM2901DT SO-14 Tube or Tape & Reel
LM2901 Low Power Quad Voltage Comparator Wide single supply voltage range or dual supplies for all devices: +2V to +36V or ±1V to ±18V Very low supply current (1.1mA) independent of supply voltage (1.4mW/comparator
74VHC132 QUAD 2-INPUT SCHMITT NAND GATE
QUAD 2-INPUT SCHMITT NAND GATE HIGH SPEED: t PD = 3.9 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C TYPICAL HYSTERESIS: V h = 1V at V CC = 4.5V POWER DOWN PROTECTION ON
74LVQ14 LOW VOLTAGE CMOS HEX SCHMITT INVERTER
LOW VOLTAGE CMOS HEX SCHMITT INVERTER HIGH SPEED: t PD = 6 ns (TYP.) at V CC = 3.3 V HYSTERESIS INPUT VOLTAGE: V H = 650mV (TYP.) at V CC = 3.0 V COMPATIBLE WITH TTL OUTPUTS LOW POWER DISSIPATION: I CC
STP55NF03L STB55NF03L STB55NF03L-1 N-CHANNEL 30V Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II POWER MOSFET
STP55NF03L STB55NF03L STB55NF03L-1 N-CHANNEL 30V - 0.01 Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STP55NF03L STB55NF03L STB55NF03L-1 30 V 30 V 30 V
M74HCT02TTR QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM150/LM250 LM350 THREE-TERMINAL 3 A ADJUSTABLE VOLTAGE REGULATORS GUARANTEED
TPP OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE. Application Specific Discretes A.S.D.
Application Specific Discretes A.S.D. OVERVOLTAGE and OVERCURRENT PROTECTION for TELECOM LINE FEATURES UNIDIRECTIONAL FUNCTION PROGRAMMABLE BREAKDOWN VOLTAGE UP TO 250 V PROGRAMMABLE CURRENT LIMITATION
74VHC174 HEX D-TYPE FLIP FLOP WITH CLEAR
HEX D-TYPE FLIP FLOP WITH CLEAR HIGH SPEED: f MAX = 175MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION
HCF4020B RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE
RIPPLE-CARRY BINARY COUNTER/DIVIDERS 14 STAGE MEDIUM SPEED OPERATION: 16MHz (Typ.) at V DD = 10V FULLY STATIC OPERATION COMMON RESET BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS
Obsolete Product(s) - Obsolete Product(s)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.8ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 12ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION
74LCX00TTR LOW VOLTAGE CMOS QUAD 2-INPUT NAND GATE WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2-INPUT NAND GATE WITH 5V TOLERANT INPUTS 5V TOLERANT INPUTS HIGH SPEED : t PD = 4.3ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE:
74LX1G04BJR LOW VOLTAGE CMOS SINGLE INVERTER WITH 5V TOLERANT INPUT
LOW VOLTAGE CMOS SINGLE INVERTER WITH 5V TOLERANT INPUT 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.2ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C POWER DOWN PROTECTION ON INPUTS
74LVC244ATTR LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE
LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE 5V TOLERANT INPUTS HIGH SPEED: t PD = 5.9ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: I
Obsolete Product(s) - Obsolete Product(s)
OPERATIONAL AMPLIFIERS LOW SUPPLY CURRENT : 375µA/op. (@ V CC = 5V) LOW INPUT BIAS CURRENT : 2nA MEDIUM SPEED :.9MHz LOW INPUT OFFSET VOLTAGE :.5mV typ for TSM14A WIDE POWER SUPPLY RANGE : ±1.5V to ±15V
TL431. Programmable voltage reference. Features. Description
Programmable voltage reference Features Adjustable output voltage: 2.5 to 36 V Sink current capability: 1 to 100 ma Typical output impedance: 0.22 Ω 1% and 2% voltage precision Description The TL431 is
TL082 TL082A - TL082B
TL082 TL082A - TL082B GENERAL PURPOSE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION
TDA0161. Proximity Detectors. Features. Description. Block Diagram. 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V
Proximity Detectors Features 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V Description These monolithic integrated circuits are designed for metallic body detection by sensing
. HIGH PERFORMANCE CLAMPING AT
L9700 HEX PRECISION LIMITER. HIGH PERFORMANCE CLAMPING AT GROUND AND POSITIVE REFERENCE VOLTAGE FAST ACTIVE CLAMPING OPERATING RANGE 4.75-5.25 V SINGLE VOLTAGE FOR SUPPLY AND POSITI-. VE REFERENCE LOW
Non-inverting input 1. Part Number Temperature Range Package Packing Marking. 4558C MC4558CPT TSSOP8 Tape & Reel MC4558IN
Wide Bandwidth Dual Bipolar Operational Amplifier Internally compensated Short-circuit protection Gain and phase match between amplifier Low power consumption Pin-to-pin compatible with MC1458/LM358 Gain
-55 to 175 C T j ( ) Pulse width limited by safe operating area.
N-CHANNEL 60V - 0.020 Ω - 28A IPAK/DPAK STripFET II POWER MOSFET TYPE V DSS R DS(on) I D 60 V