PRESSURE TRANSMITTER FKB...4

Transcription

1 FX RI RO Y RUR RNIR F...4 he FX 2 pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 2m signal. he transmitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. otally welded construction of the seals assures excellent reliability in high temperature and highly corrosive process conditions. FUR 1. igh accuracy.2% accuracy for all calibrated spans is a standard feature for all G models covering 1.ka{.1bar} range to ka{bar} high pressure range..1% accuracy is available as option. Fuji's micro-capacitance silicon sensor assures this accuracy for all elevated or suppressed calibration ranges without additional adjustment. 2. inimum environmental influence he "dvanced Floating ell" design which protects the pressure sensor against changes in temperature, and overpressure substantially reduces total measurement error in actual field applications.. Fuji/R bilingual communications protocol and FOUNION fieldbus and rofibus compatibility FX 2 series transmitter offers bilingual communications to speak both Fuji proprietary protocol and R. ny R compatible devices can communicate with FX 2. Further, by upgrading electronics FOUN- ION fieldbus and rofibus are also available. 4. pplication flexibility arious options that render the FX 2 suitable for almost any process applications include: nalog indicator at either the electronics side or terminal side Full range of hazardous area approvals uilt-in RFI filter and lightning arrester -digit meter with engineering unit tainless steel electronics housing ide selection of materials igh temperature, high vacuum seals. urnout current flexibility (Under cale:.2 to.8m, Over cale: 2.8 to 21.m) urnout signal level is adjustable using odel FX and eld ommunicator () to comply with NUR N4.. ry calibration without reference pressure hanks to the best combination of unique construction of mechanical parts (ensor unit) and high performance electronics circuit (lectronics unit), reliability of dry calibration without reference pressure is at equal level as wet calibration. IFIION Functional specifications ervice: iquid, gas, or vapour pan, range, and overrange limit: ype F 1 F 2 F F 4 F pan limit [ka]{bar} in. 1. {.1} {.} {.} 1 {1} {} ax. 1 {1.} {} {} 1 {1} {} Range limit [ka]{bar} 1 to +1 { 1 to +1.} 1 to + { 1 to +} 1 to + { 1 to +} 1 to +1 { 1 to +1} 1 to + { 1 to +} Overrange limit [a] {bar} 1 {1} 1. {1} 9 {9} 1 {1} {} Remark: o minimize environmental influence, span should be greater than 1/4 of the max. span in most applications. ower range limit (vacuum limit) ; ilicone fill sensor: ee Fig. 1, Fig. 2 Fluorinated fill sensor: tmospheric pressure onversion factors to different units; 1a=1 ka=1bar=1.191kgf/cm 2 =14.psi 1ka=1mbar=11.91mm 2 O=4.14in 2 O Output signal: 4 to 2m with digital signal superimposed on the 4 to 2m signal. ower supply: ransmitter operates on 1. to 4 at transmitter terminals. 1. to 2 for the units with optional arrester. X-8f -2b ate pr. 1, 2

2 F oad limitations: see figure below Note: oad resistance [Ω] For communication with (1) (odel: FX), min. of 2Ω is required. azardous locations: 1Ω Ω Operating area [ ] 1. ower voltage uthorities Flameproof Intrinsic safety ype n Nonincendive X x II 2 G x II 1 G x II G - xd II / - xia II 4/ - xn II 4/ Factory lass I II III lass I II III lass I II III utual iv. 1 iv. 1 iv. 2 Groups thru. G Groups thru. F Groups thru. G lass I II III lass I II III lass I II III iv. 1 iv. 1 iv. 2 Groups thru. G Groups thru. G Groups thru. G II x do II+ 2 4 x ia II 4 (*) (*) pproval pending Zero/span adjustment: Zero and span are adjustable from the (1). Zero and span are also adjustable externally from the adjustment screw (pan adjustment is not available with 9th digit code ",,, "). amping: djustable from or local adjustment unit with display. he time constant is adjustable between.12 to 2 seconds. Zero elevation/suppression: Zero can be elevated or suppressed within the specified range limit of each sensor model. Normal/reverse action: electable from (1). Indication: nalog indicator or -digit meter, as specified. urnout direction: electable from (1) If self-diagnostic detect transmitter failure, the analog signal will be driven to either Output old, Output Overscale or Output Underscale modes. Output old : Output signal is hold as the value just before failure happens. Output Overscale : djustable within the range 2.8m to 21.m from (1) (Note) (1) : and eld ommunicator Output Underscale : djustable within the range.2m to.8m from (1) [m] Over scale urnout Under scale urnout Normal operating range robable under range robable over range oop-check output: ransmitter can be configured to provide constant signal.8m through 21.m by (1). emperature limit: mbient: 4 to +8 ( 2 to +8 for indicator) ( 4 to + for arrester option) ( 1 to + for fluorinated oil fill transmitter) ( 1 to +8 for silicone oil "", "", "") (+2 to +8 for silicone oil "", "") For explosionproof units (flameproof or intrinsic safety), ambient temperature must be within the limits specified by each standard. rocess: Fill fluid ode in the 1th digit of "ode symbols" rocess temperature ower limit of static press. Fluorinated oil, and 2 to 12 tmospheric ilicone oil 1 to 2 pressure 8 to Y and G 4 to 12 2.ka abs {2mmg 1 to 2 abs} 8 to.1ka abs 1 to 2 {1mmg abs} or more torage: 4 to +9 umidity limit: to 1% R ommunication: ith (1) (odel FX, consult ata heet No. 8-4), following information can be remotely displayed or reconfigured. Note: 's version must be more than. (or FX 1 ), for FX- 2. Items isplay et ag No. odel No. erial No. v ngineering unit Range limit v easuring range amping Output mode v urnout direction alibration Output adjust v ata v elf diagnoses v rinter xternal switch lock ransmitter display inearize Rerange

3 erformance specifications Reference conditions, silicone oil fill, 1 isolating diaphragms, 4 to 2m analog output in linear mode. ccuracy rating: (including linearity, hysteresis, and repeatability) (tandard) For spans greater than 1/1 of UR: ±.2% of span For spans below 1/1 of UR:.1 UR ± (.1+.1 % of span pan ) (Option) (ode; 21th digit,) Not available for ax span ka model. For spans greater than 1/1 of UR: ±.1% of span For spans below 1/1 of UR:.1 UR ± (.+. % of span pan ) tability: ±.1% of upper range limit (UR) for month. emperature effect: ffect per 28 change between the limits of 4 and +8 (tandard) Zero shift: ±.% of UR otal effect: ±.% of UR (Option) (ode; 21th digit,) Zero shift: ±.% of UR otal effect: ±.4% of UR Overrange effect: Zero shift;.2% of UR for any overrange to maximum limit upply voltage effect: ess than.% of calibrated span per 1 RFI effect: ess than.2% of UR for the frequencies of 2 to 1z and field strength /m when electronics covers on. (lassification: 2-abc:.2% span per.1) tep response: ime constant:.2s* ) ead time:.2s* ) (without electrical damping) *) Faster response is available as option (maximum update rate: 2 times per second). ielectric strength:, /z 1 min., between circuit and earth. Insulation resistance: ore than 1Ω/. urn-on time: 4 sec. Internal resistance for external field indicator: 12Ω or less hysical specifications lectrical connections: G1/2, 1/2-14 N, g1., or 2 1. conduit, as specified. 1-port (standard) or 2-port with each conduit, as specified. rocess connections: I, NI, or IN raised face flanges or screw connection I/IO G1 external thread. Refer to "ode symbols." rocess-wetted parts material: iaphragm: 1 stainless steel, astelloy- onel, antalum, itanium or Zirconium Flange face:1 stainless steel, astelloy- onel, antalum, itanium or Zirconium xtension: 1 stainless steel, astelloy- (Refer to "ode symbols") Non-wetted parts material: lectronics housing: ow copper die-cast aluminum alloy finished with epoxy/ polyurethane double coating (standard), or 1 stainless steel (14 per I G121), as specified. apillary: In case of 11th code ",,, F,, N, ", armored stainless steel. In case of 11th code ", R,,,,, X", stainless steel armored stainless steel. ounting flange: 4 stainless steel or carbon steel, as specified Fill fluid: ilicone oil (standard) or fluorinated oil ounting bracket: 4 stainless steel nvironmental protection: I I and N / ounting: On.mm (I ) pipe using mounting bracket, direct wall mounting ass {weight}: ransmitter approximately 1kg without options. dd;.kg for mounting bracket.8kg for indicator option 4.kg for stainless steel housing option 1.kg per mm extension of diaphragm

4 F...4 Optional features Indicator: plug-in analog indicator (1.% accuracy) can be housed in the electronics compartment or in the terminal box of the housing. n optional -digit meter with engineering unit is also available. ocal adjustment unit with display: n optional -digit meter with Zero/ pan adjustment function, loop-check function and damping adjustment function, is available. rrester: built-in arrester protects the electronics from lightning surges. ightning surge immunity: 4k (1.2 µs) Oxygen service: pecial cleaning procedures are followed throughout the process to maintain all process wetted parts oil-free. he fill fluid is fluorinated oil. hlorine service: Oil-free procedures as above. Includes fluorinated oil for fill. egreasing: rocess-wetted parts are cleaned, but the fill fluid is standard silicone oil. Not for use on oxygen or chlorine measurement. acuum and high temperature service: pecial silicone oil and filling procedure are applied. ee Fig.1 and Fig.2. Optional tag plate: n extra stainless steel tag for customer tag data is wired to the transmitter. oating of cell: ell's surface is finished with epoxy/polyurethane double coating. pecify if environment is extremely corrosive. ORI and-held communicator: (odel FX, refer to ata heet No. 8-4) Z/ board: arts No.=ZZFX4- hen Z/ board is mounted on the FX 2 amplifier unit, external adjustment screw will be available for zero and span adjustment. [ka abs] {mbar abs} Operating pressure 11 {11}. {} 1. {1} 2. {2} ilicone (ode Y,G) ilicone (ode ) Operating area ilicone (ode ) rocess temperature[ ] [ka abs] {mbar abs} 11 {11} Operating pressure.2 {2.}.1 {1.} ealing liquid:ilicone (ode ) Operating area Fig. 2 Relation between process temperature and operating pressure 1 1 rocess temperature[ ] 2 Non-operating area Fig. 1 Relation between process temperature and operating pressure 4

5 O YO igit 4 <onduit connection> G1/2 ( 1) 1/2-14N ( 1) g1. ( 1) 2 1. ( 1) G1/2 ( 2) 1/2-14N ( 2) g1. ( 2) 2 1. ( 2) <Flanges> ounting flange 4 stainless steel arbon steel 1 stainless steel (wafer type) <pan limit (*2) [ka]{bar}> escription 1. 1 {.1 1.} {. } {. } 1 1 {1 1} { } vailable only with material code "" <aterial/diaphragm extension> iaphragm 1 stainless steel Flange face 1 stainless steel iaph. extension [mm] astelloy- 1 stainless +u coating onel antalum itanium Zirconium ombination with 12th digit code ",,, " are not available. Flange size and rating I 1 8 I 1 1 NI/I 1 "" NI/I 1 "4" IN N1/4 N8 IN N1 N1 I 2 8 I 8 NI/I NI/I I 1 8 I 1 1 NI/I 1 "" NI/I 1 "4" IN N1/4 N8 IN N1 N1 crew type, I/IO G1 NI/I 1 NI/I 1 4 NI/I NI/I 4 NI/I inch wafer 4 inch wafer astelloy- 1 stainless steel onel antalum itanium Zirconium Ranges * * (*) (*4) Note Note 2 Note 1 Note Note F G X Y U igit No. of code (*1) F G Note1: (*1) If range 4 or is selected, specify material "" in any cases. Note2: (*2) 1: 1 turn down is possible, but should be used at a span greater than 1/4 of the maximum span for better performance. Note: (*) vailable for 1th digit code "", "", "" and th digit code 1, 4,,,,,,,, Y. Note4: (*4) vailable for th digit code 2, and th digit,,, 9,,, G,,,,, U,, X. R

6 F...4 igit escription Note <Indicator and arrester> Indicator rrester Z/ board nalog, to 1% linear scale attached. nalog, custom scale pproval Yes pending for nalog, to 1% linear scale Yes 1th digit code nalog, custom scale Yes "G,,,, " igital, to 1% igital, custom scale igital, to 1% Yes igital, custom scale Yes igital, to 1% (ocal adjustment unit with display) pproval igital, custom scale pending for (ocal adjustment unit with display) 1th digit code igital, to 1% ",, G,,,, (ocal adjustment unit with display) Yes " igital, custom scale (ocal adjustment unit with display) Yes pprovals for hazardous locations (for ordinary locations) II, Flameproof (onduit seal) (vailable for 4th digit code, ) II, Flameproof (able gland seal) (vailable for 4th digit code, ) F, Flameproof (or explosionproof) (vailable for 4th digit code, ), Flameproof (or explosionproof) (vailable for 4th digit code, ) X, Flameproof II, Intrinsic safety (pproval pending) F, Intrinsic safety and nonincendive, Intrinsic safety and nonincendive X, Intrinsic safety X, ype n <apillary and mounting bracket> apillary ounting bracket rmor of capillary 1. m tainless steel tainless steel tainless steel tainless steel tainless steel tainless steel tainless steel (*) (*) (*) (*) Note Note Note Note <Options> xtra tag plate tainless steel elec. housing oating of cell Yes Yes Note Yes (*) Yes Yes Yes Yes Yes Yes Yes Yes Yes Note: vailable for 1th digit code "Y,, G,, ". Inquire about in case of 1th other code. Note: (*) vailable for all 1th digit code. Note: (*) ustomer tag number can be engraved on standard stainless steel name plate. If extra tag plate is required, select "Yes" F igit No. of code F X G F N R X Y N

7 igit escription Note <pecial applications and fill fluid> reatment Fill fluid tandard ilicone oil tandard Fluorinated oil egreasing ilicone oil Oxygen service Fluorinated oil (th digit code "", "", "", "" and "") hlorine service Fluorinated oil (th digit code "", "F", "G", "", "" and "") igh temp. 2 ilicone oil vailable for th digit code "1", "2"or igh temp. ilicone oil "". In case of 1th code "", "", "", igh temp. and vacuum (2 ) ilicone oil available for th digit code "2", "" only. (* 8) igh temp. and vacuum ( ) ilicone oil vailable for th digit code "", "", igh temp. and high vacuum ilicone oil "", "", "", "", "F", "G", "" or "". Note 8 <eflon membrane> Yes (vailable for the th digit code "", "", "", "", "", "G", "" and th digit code "", "", "", "", "", "R". Not available for the 1th digit code "", "", "", "", "".) <olt/nut> (*9) Note 9 (th digit code "1", "2", "") r-o alloy hexagon socket head cap screw/carbon steel nut r-o alloy hexagon bolt/carbon steel unit 4 stainless steel/4 stainless steel (th digit code "4") stainless steel/4 stainless steel (th digit code "") <Other options> igh accuracy type ow temperature effect type + Note8: (*8) reatment; tandard Note9: (*9) In case of tropical use, select stainless bolts and nuts. (th digit code "4", "") F igit No. of code Y G Y Y F

8 F...4 OUIN IGR (Unit:mm) G. pipe I (2) In case of 4th digit code ",," U - olt 8 "" onduit conn.2 Zero. crew ø (1) Up own 14 Fastener (Flameproof only) ø8 4 holes 9 dia (2) 88 "" onduit conn.1 Note) able gland (Option) "" onduit conn. ith field ind. Inner of gasket etail "" (onduit conn.) ø1 etail "" (onduit conn.) ø1 N holes h dia. ø ø øf øg ø 1 2 t ee table 1 arth terminal G 1 / No flange is attached in case of th digit code ",,R". th digit code R F ass approx.(kg) th digit of the code symbols,,,, onduit conn. G1/ /2-14N 1 g able lectronics unit ensor unit ø ø øf øg ø 9 Note) able gland is supplied in case of 1th digit code "". ø11 cable is suitable. 9 9 t N-øh (Flange) I-1-8 I-1-1 NI/I -1- NI/I -1-4 IN N4 N8 IN N1 N1 ONNION IGR 12 (4 screws) 11th digit code R F (m) 1. N 8 X 1 8

9 "" onduit conn.2 G. pipe I (2) Zero. crew U - olt 8 In case of 4th digit code ",," ø8 1 (1) Up 14 Fastener (Flameproof only) ø8 2. own 4 holes 9 dia (2) 88 Note) able gland (Option) "" onduit conn. "" onduit conn G1 ø ø ith field ind. acking arth terminal lectronics unit etail "" (onduit conn.) ø1 etail "" (onduit conn.) ø1 21 ensor unit G1/2 G1/2 11th digit code R (m) 1. ONNION IGR 12 F (4 screws) N 8 X 1 9

10 F...4 ORRING INFOION hen ordering this instrument, specify. 1. O YO 2. easuring range.. Output orientation (burnout direction) when abnormality is occurred in the transmitter. old / Overscale (21.m) / Underscale (.2m) Unless otherwise specified, output hold function is supplied. 4. Indication method (indicated value and unit) in case of the actual scale (code,,, on 9th digit).. ag No. (up to 2 alphanumerical characters), if required. he product conforms to the requirements of the lectromagnetic compatibility irective 94/9/ as detailed within the technical construction file number N1. he applicable standards used to demonstrate compliance are : I (mission) N12 : 199 lass (standard for Industrial ocation) Frequency range Reference z imits standard to 2 2 to 1 henomenon lectrostatic discharge lectromagnetic field 4d (µ/m) quasi peak, measured at 1m distance 4d (µ/m) quasi peak, measured at 1m distance est value 4k (ontact) 8k (ir) 8 to 1z 1/m 8% (1kz) asic standard IR1-1 and IR1-2 I (Immunity) N12: 199 nnex (standard for Industrial ocation) Rated power frequency magnetic field urst urge /m z 2k kz 1.2µs/µs 1k (ine to line) 2k (ine to ground) I1-4-2 I1-4- I1-4-8 I1-4-4 I1-4- erformance criteria onducted RF.1 to 8z 8% (1kz) I1-4- Note) efinition of performance criteria : uring testing, normal performance within the specification limits. : uring testing, temporary degradation, or loss of function or performance which is self-recovering. ead office 11-2 Osaki 1-chome, hinagawa-ku, okyo, apan ales iv. International ales ept. No.1, Fuji-machi, ino-city, okyo, apan hone: , 22 Fax: Information in this catalog is subject to change without notice. rinted in apan