Fuji Electric France S.A.S. ABSOLUTE, DIFFERENTIAL AND GAUGE PRESSURE TRANSMITTER FOR REMOTE SEAL(S) FEATURES SPECIFICATIONS FKB, FKD, FKM...
|
|
- Lionel Maxwell
- 5 years ago
- Views:
Transcription
1 ABOLU, DIFFNIAL AND GAUG U ANMI FO MO AL() DAA H he FCX-AII series absolute, differential and gauge pressure transmitters accurately measures and transmits proportional 4 to 20 madc signal. he transmitters utilize the unique micromachined capacitive silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. FKB, FKD, FKM...F FAU 1. High accuracy 0.065% accuracy is a standard feature for differential and gauge pressure models and 0.2% accuracy for absolute pressure models. he microcapacitance silicon sensor assures this feature for all elevated or suppressed calibration ranges without additional adjustment. 2. Minimum inventory and design lectronics unit, local indicators and electronics housing are interchageable among all FCX-AII transmitters. Our differential, gauge and absolute pressure transmitters for remote seal(s) are welded design with reduced volume flange welded on cell s body to guarantee a perfect vaccum tightness and high pressure services. he Advanced Floating Cell design which protects the pressure sensor against changes in tempera ture, and overpressure substantially re duces total measurement error in 4. Fuji/HA bilingual communications protocol FCX-AII series transmitter offers bilingual communications to speak both Fuji proprietary protocol and HA. Any HA compatible devices can communicate with FCX-AII. Various options that render the FCX-AII suitable for almost any process applications include: - Full range of hazardous area approvals - 5-digit LCD meter with engineering unit - tainless steel electronics housing - Wide selection of materials - High temperature, high vacuum seals 6. rogrammable output Linearization Function Output signal can be freely programmable. Up to 14 compensated points at approximation. Over cale: 20.0 to 22.5 ma) Burnout signal level is adjustable using Model FXW or Hand Held Communicator (HHC) to comply with NAMU N Dry calibration without reference pressure hanks to the best combination of unique construction of mechanical parts (ensor unit) and high performance electronics circuit (lectronics unit), reliability of dry calibration without reference pressure is at equal level as wet calibration. CIFICAION Fuji lectric France.A.. ype: - FKD : differential pressure transmitter with remote seal(s) - FKB : gauge pressure transmitter with remote seal - FKM : absolute pressure transmitter with remote seal ervice : Liquid, gas, or vapour pan, range, and overrange limit : pan limits ange limits Model Minimum Maximum FKD (mbar) (mbar) (mbar) F D ± 320 F D ± 1300 F D ± 5000 F D ± F D 9* ± FKB (bar) (bar) (bar) F B 1 0,013 1,3-1 to + 1,3 F B 2 0, to + 5 F B 3 0, to + 30 F B to F B to FKM (bar abs) (bar abs) (bar abs) F M 1 0,016 0,16 0 to +0,16 F M 2 0,013 1,3 0 to +1,3 F M 3 0, to +5 F M 4 0, to +30 F M to +100 emark: o minimize environmental influence, span should be greater than 1/40 of the max. span in most applications. 100 bar. he accuracy is not guaranteed when used at negative D. DF6-05m Date October, 2015
2 FKB, FKD, FKM...F Output signal : 4 to 20 ma DC (linear or square root) with digital signal superimposed on the analogic signal ower supply : ransmitter operates on 10.5 to 45 V DC at transmitter terminals to 32 V DC for the units with optional arrester. Load limitations : Load resistance [ ] When the upper limit of the saturation current (Imax) is 21.6 ma 600 Operating area Note: For communication with HHC (1) Hazardous locations : Communication range with HHC [V] ower voltage Note) he load resistance varies with the upper limit of the saturation current [I max] [V] [Ω] = (I max [ma]+0.9)x10-3 AX x II 1 G (K) ntity arameters: CA (J) ICx () C ntity arameters: ntity arameters: ntity arameters: AX (X) (D) CA () ICx () AX () (H) CA (J) ICx (Q) x II 2 GD x td A21 I66/ C C DI A21 I66/ C x II 3 G Model code C 2
3 Zero/span adjustment : Zero and span are adjustable from the HHC (1). Zero and span are also adjustable externally from the adjustment screw. Damping : Adjustable from HHC or local adjustment unit with LCD display. he time constant is adjustable between 0,06 to 32 sec Zero elevation/suppression : Zero can be elevated or suppressed within the speci- +100% of UL for FKD. FKB : -1 bar to 100% of UL. Normal/reverse action : electable from HHC (1). Indication : A plug-in analog indicator can be mounted on the electronics unit or the terminal block. Burnout direction : electable from HHC (1) If self-diagnostic detect transmitter failure, the analog signal will be driven to either Output Hold, Output Overscale or Output Underscale modes. Output Hold : Output signal is hold as the value just before failure happens. Output Overscale : Adjustable within the range 20.0 ma to 22.5 ma from HHC (1) Output Underscale : Adjustable within the range 3.2 ma to 4.0 ma from HHC (1) [ma] Over scale Burnout Damping v v v v v v Output Linear v v v v v v mode quare root v v v v v v Burnout direction v v v v v v Calibration v v v v v v Output adjust v v v Data v v v elf diagnoses v v v rinter (In case of FXW with printer option) v xternal switch lock v v v v v v ransmitter display v v v v v v Linearize* v v erange v v v v v v aturate current v v v v v v Write protect v v v v v v History Calibration history Ambient temperature history v v (Note) (1) HHC: Hand Held Communicator can support all items (Fuji rotocol list) except Linearize function. rogrammable output linearization function : Output signal can be characterized with 14 points linear approximation function from HHC (1). v v v v v v v Under scale Burnout Normal operating range robable under range robable over range Output Limits comforming the NAMU N43 by order. Loop-check output : 3.2 ma through 22.5 ma by HHC (1). emperature limit : Ambient: -40 to +85 C -20 to +80 C (for LCD indicator) -40 to +60 C (for arrester option) - each standard. rocess: temperature conditions. torage: - 40 to +90 C Humidity limit : 0 to 100% H (elative Humidity) Communication : With HHC (1) (model FXW, consult D No.D8-47), Note: HHC s version must be higher than 7.0 (or FXW 1 4), for FCX -AII for supporting these items: aturate current, Write protect. Items Fuji rotocol with FXW Hart rotocol By local configurator (with 3 push button), (LCD indicator) Display et Display et Display et ag No. v v v v v v Model No. v v v v v v erial No. & oftware Version v v v ngineering unit v v v v v v ange limit v v v Measuring range v v v v v v diaphragms, 4 to 20 ma analog output. Accuracy rating : (including linearity, hysteresis, and repeatability) For span greater than 1/10 of UL : ± 0,065% of calibrated span (FKB & FKD) ± 0,1% of calibrated span for FKB 5VF ± 0,2% of calibrated span for FKM For span smaller than 1/10 of UL : ± (0, ,05 x 0,1 x UL/span) % of span (FKB & FKD) ± (0,1+ 0,1 x 0,1 x UL/span) % of span (FKM) tability : ± 0.2% of upper range limit (UL) for 10 years. Linearity : 0,05% of calibrated span (FKB & FKD) 0,1% of calibrated span (FKM) emperature effect : ffect per 28 C change between - 40 C and +85 C Model FKM : Zero shift : ±(0, ,1 x UL/span) % of UL otal effect : ±(0,15 + 0,1 x UL/span) % f UL Model FKB & FKD : Zero shift : ±(0, ,0125% UL/span) % of UL otal effect : ±(0, ,0125 UL/span) % of UL tatic pressure effect (FKD) : Zero shift : ± 0,035% of UL for 100 bar Overrange effect (FKB & FKM) : Zero shift : 0,2% of UL, for any overrange pressures (limited to the max. overrange pressure) 3
4 FKB, FKD, FKM...F Overrange effect (FKD) : Zero shift : ± 0,15% of UL / 160 bar limit upply voltage effect : Less than 0.005% of calibrated span per 1V FI effect : < 0,2% of UL for the frequences of 20 to 1000 MHz and AMA MC 33.1) Update rate : 60 msec esponse time : (at 63,3% of output signal without damping) ime constant : 300 msec (FKD span code 3 ) ime constant : 200 msec (other spans and FKB, FKM) Dead time : 300 msec esponse time = time constant + dead time Mounting position effect : Zero shift : < 12 mm C for 10 incline in any position. his shift can be corrected with the zero adjustment. Vibration effect : < ±0,25% Of span for spans greater than 1/10 of UL. Frequency 10 to 150 Hz, acceleration 39,2 m/sec 2. hese informations are available only for capillary mounting. Material fatigue : lease consult Fuji lectric Dielectric strength: 500 V AC, 50/60 Hz 1 min., between circuit and earth. Insulation resistance : ressure equipment directive (D) 97/23/C FKD: According to Article 3.3 FKB: Digit 6 code 1, 2, 3, 4 according to Article 3.3 Digit 6 code 5 : Category III module B FKM: According to Article 3.3 Mass {weight} : efer to outline dimensions page 12 to 17. Diaphragm seal(s) : A comprehensive selection of seals can be chosen in Optional features Indicator : A plug-in analog indicator (2.5% accuracy) can be housed in the electronics compartment or in the terminal box of the housing. An optional 5 digit LCD meter with engineering unit is also available. An optional 5 digits LCD meter with 3 push buttons can support items as using communication with FXW. Arrester : A built-in arrester protects the electronics from lightning surges. Lightning surge immunity: 4 kv ( μs) Metallic materials for all pressure boundary parts comply with NAC M 0175/IO bolts and nuts comply with NAC M 0175/IO Optional tag plate : An extra stainless steel tag for customer tag data is wired to the transmitter. Vacuum service : ee Fig.1 [orr] 760 ealing liquid:ilicone oil (Code Y) FKB & FKD type only lectrical connections : 1/2-14 N, g 13,5 or M20 x 1,5 rocess-wetted parts material : Diaphragm : 316L, Hastelloy-C, Monel, antalum, itanium or Zirconium Flange face : 316L, Hastelloy-C, Monel, antalum, itanium or Zirconium xtension : 316L, Hastelloy-C (efer to Code symbols ) Non-wetted parts material : lectronics housing : - Bolts and nuts : tandard : Cr-Mo alloy pressure > 100 bar tandard : ilicone oil Mounting bracket : 304L or 316L nvironmental protection : IC I66/I67 and NMA4X Mounting bracket: Without : direct mounting With (option) : On 50 mm (2 ) pipe or direct wall mounting 4 Operating pressure Operating area Non operating area rocess temperature[ C ] 120 Fig. 1 elation between process temperature and operating pressure ACCOI Hand-held communicator : (Model FXW, refer to Data heet No. D8-47)
5 COD YMBOL - FKB F K B V F - Y DCIION ype mart, 4-20 madc + Fuji/Hart digital signal Conduit connection 1/2"-14N V g 13.5 W M20 x 1.5 Diaphragm seal rating 2 N 25 4 N Lbs 6 N Lbs 8 N 40 9 N 16 L N Lbs M N Lbs N N Lbs N Lbs (*1) pans 1 (*2) 0 to 0.013/1.3 bar 2 (*3) 0 to 0.05/5 bar 3 0 to 0.3/30 bar 4 (*4) 0 to 1/100 bar 5 (*4) 0 to 5/500 bar Indicator, arrester and initial setting Indicator Arrester Initial setting V F - A None None V F - B Analog, 0-100% linear scale None V F - D Analog, Custom scale None V F - J Analog, double scale None 4-20mA DC V F - None Yes + V F - F Analog, 0-100% linear scale Yes Hart /Fuji V F - H Analog, Custom scale Yes digital signal V F - K Analog, double scale Yes "MA'' V F - L Digital, 0-100% None V F - Digital, Custom scale None V F - Q Digital, 0-100% Yes V F - Digital, Custom scale Yes V F - 1 Digital, 0-100% with push button None V F - 2 Digital, Custom scale with push button None V F - 4 Digital, 0-100% with push button Yes V F - 5 Digital, Custom scale with push button Yes A X K D H J Q L M N V Approvals for hazardous locations (consult FUJI for availability) None (tandard) AX - Flameproof enclosures (digit 4 = "" & "W" only) AX - Intrinsic afety (*8) FM - xplosion-roof (digit 4 = "" only) CA - xplosion-roof (digit 4 = "" only) FM - Intrinsic afety and Non Incendive CA - Intrinsic afety AX - ype "n" (digit 9 = A,, 1, 2, 3, 4 & 5 only) ICx - ype "n" (digit 9 = A,, 1, 2, 3, 4 & 5 only) ICx - Flameproof enclosures (digit 4 = "" & "W" only) ICx - Intrinsic afety CA - xplosion-roof & Intrinsic afety combined approval (digit 4 = "" only) AX - Flameproof enclosures & Intrinsic afety combined approval (digit 4 = "" & "W" only) ICx - Flameproof enclosures & Intrinsic afety combined approval (digit 4 = "" & "W" only) FM - xplosion-roof & Intrinsic afety combined approval (digit 4 = "" only) (*5) Mounting design Ambiant temperature correction B Capillary ransmitter and diaphragm seal assembly L igid - long design ransmitter and diaphragm seal assembly M igid - short design ransmitter and diaphragm seal assembly G Capillary ransmitter igid - long design ransmitter igid - short design ransmitter Cell flange design tainless teel parts Operating pressure (bar) Bolts/nuts ag plate Housing & mounting bracket 1 Y (*7) (*6) none None None 2 Y (*7) (*6) none Yes None 3 Y (*7) (*6) none None Yes 4 Y (*7) (*6) none Yes Yes Y Y (*7) carbon steel None None B Y (*7) carbon steel Yes None C Y (*7) carbon steel None Yes Y (*7) carbon steel Yes Yes A Y (*7) 316(L)/ 316(L) None None D Y (*7) 316(L)/ 316(L) Yes None F Y (*7) 316(L)/ 316(L) None Yes G Y (*7) 316(L)/ 316(L) Yes Yes H Y (*7) (*9) 660/ 660 None None J Y (*7) (*9) 660/ 660 Yes None K Y (*7) (*9) 660/ 660 None Yes L Y (*7) (*9) 660/ 660 Yes Yes Notes* : 1- urn down of 100:1 is possible, but should be used at the span greater than 1/10 of the maximum span for better performance. 5- ransmitter with capilary design has a standard mounting bracket - igid monting design are always without monting bracket 6- Codify bolts and nuts for all mounting even if p < 50 bar 8- Code "D & V" FM approval only possible with electrical connection 1/2"-14 N 9- Our bolts/nuts in 660 are in conformity with the NAC M 0175/IO requirements and must be used for NAC M 0175/IO service. 5
6 6 FKB, FKD, FKM...F COD YMBOL - FKD F K D V F - Y DCIION (*5) ype Differential pressure transmitter - mart, 4-20 madc + Fuji/Hart digital signal Conduit connection 1/2"-14N V g 13.5 W M20 x 1.5 Diaphragm seal rating 2 N 25 4 N Lbs 6 N Lbs 8 N 40 9 N 16 L N Lbs M N lbs N (*9) N lbs (*9) N lbs (*1) pans 3 (*2) 0 to 3,2/320 mbar 5 (*2) 0 to 0,013/1,3 bar 6 0 to 0,05/5 bar 8 0 to 0,3/30 bar 9 0 to 2/200 bar Indicator, arrester and initial setting Indicator Arrester Initial setting V F - A None None V F - B Analog, 0-100% linear scale None V F - C None V F - D Analog, Custom scale None V F - J Analog, double scale None V F - None Yes V F - F Analog, 0-100% linear scale Yes V F - G Yes V F - H Analog, Custom scale Yes V F - K Analog, double scale Yes V F - L Digital, 0-100% None V F - Digital, Custom scale None V F - M Digital, 0-100% scale None V F - Q Digital, 0-100% Yes V F - N Digital, 0-100% scale Yes V F - Digital, Custom scale Yes V F - 1 Digital, 0-100% with push button None V F - 2 Digital, Custom scale with push button None V F - 3 Digital, 0-100% scale with push button None V F - 4 Digital, 0-100% with push button Yes V F - 5 Digital, Custom scale with push button Yes V F - 6 Digital, 0-100% scale with push button Yes A X K D H J Q L M N V Approvals for hazardous locations (consult FUJI for availability) None (tandard) AX - Flameproof enclosures (digit 4 = "" & "W" only) AX - Intrinsic afety 4-20mA DC + Hart /Fuji digital signal "MA'' (*7) FM - xplosion-roof (digit 4 = "" only) CA - xplosion-roof (digit 4 = "" only) FM - Intrinsic afety and Non Incendive CA - Intrinsic afety AX - ype "n" (digit 9 = A,, 1, 2, 3, 4 & 5 only) ICx - ype "n" (digit 9 = A,, 1, 2, 3, 4 & 5 only) ICx - Flameproof enclosures (digit 4 = "" & "W" only) ICx - Intrinsic afety CA - xplosion-roof & Intrinsic afety combined approval (digit 4 = "" only) AX - Flameproof enclosures & Intrinsic afety combined approval (digit 4 = "" & "W" only) ICx - Flameproof enclosures & Intrinsic afety combined approval (digit 4 = "" & "W" only) FM - xplosion-roof & Intrinsic afety combined approval (digit 4 = "" only) (*5) (*6) Mounting design (*3) Ambiant temperature correction B Capillary on H side ransmitter and diaphragm seal assembly C Capillary on H & L side ransmitter and diaphragm seal assembly (*6) igid short design on H & capillary on L side ransmitter and diaphragm seal assembly G Capillary on H side ransmitter H Capillary on H & L side ransmitter Cell flange design tainless teel parts Operating pressure (bar) Bolts/nuts ag plate Housing 1 Y (*4) None None None 2 Y (*4) None Yes None 3 Y (*4) None None Yes 4 Y (*4) None Yes Yes Y Y Carbon steel None None B Y Carbon steel Yes None C Y Carbon steel None Yes Y Carbon steel Yes Yes A Y 316(L)/ 316(L) None None D Y 316(L)/ 316(L) Yes None F Y 316(L)/ 316(L) None Yes G Y 316(L)/ 316(L) Yes Yes H Y (*8) 660/ 660 None None J Y (*8) 660/ 660 Yes None K Y (*8) 660/ 660 None Yes L Y (*8) 660/ 660 Yes Yes Notes* : 1- urn down of 100:1 is possible, but should be used at the span greater than 1/10 of the maximum span for better performance 3- ransmitter with capilary design has a standard mounting bracket 4- If direct mounted seal design is required, bolts are necessary even when p < 50bar 6- ransmitter with different diaphragm seals or capillary lenghtes on H and L side must be temperature corrected. 7- Code "D & V" FM approval only possible with electrical connection 1/2"-14 N. 8- Our bolts/nuts in 660 are in conformity with the NAC M 0175/IO requirements and must be used fornac M 0175/IO service. 9- High static pressure D measuring cell and M12 bolting required (upon request.
7 COD YMBOL - FKM F K M V F - Y DCIION ype mart, 4-20 madc + Fuji/Hart digital signal Conduit connection 1/2"-14N V g 13.5 W M20 x 1.5 Diaphragm seal rating 2 N 25 4 N Lbs 6 N Lbs 8 N 40 9 N 16 (*1) pans 1 (*2) 0 to 0.016/0.16 bar abs 2 (*3) 0 to 0.013/1.3 bar abs 3 0 to 0.05/5 bar abs 4 0 to 0.3/30 bar abs 5 0 to 1/100 bar abs Indicator, arrester and initial setting Indicator Arrester Initial setting V F - A None None V F - B Analog, 0-100% linear scale None V F - D Analog, Custom scale None V F - J Analog, double scale None V F - None Yes V F - F Analog, 0-100% linear scale Yes V F - H Analog, Custom scale Yes V F - K Analog, double scale Yes V F - L Digital, 0-100% None V F - Digital, Custom scale None V F - Q Digital, 0-100% Yes V F - Digital, Custom scale Yes V F - 1 Digital, 0-100% with push button None V F - 2 Digital, Custom scale with push button None V F - 4 Digital, 0-100% with push button Yes V F - 5 Digital, Custom scale with push button Yes A X K D H J Q L M N V Approvals for hazardous locations (consult FUJI for availability) None (tandard) AX - Flameproof enclosures (digit 4 = "" & "W" only) AX - Intrinsic afety 4-20mA DC + Hart /Fuji digital signal 'MA'' (*7) FM - xplosion-roof (digit 4 = "" only) CA - xplosion-roof (digit 4 = "" only) FM - Intrinsic afety and Non Incendive CA - Intrinsic afety AX - ype "n" (digit 9 = A,, 1, 2, 3, 4 & 5 only) ICx - ype "n" (digit 9 = A,, 1, 2, 3, 4 & 5 only) ICx - Flameproof enclosures (digit 4 = "" & "W" only) ICx - Intrinsic afety CA - xplosion-roof & Intrinsic afety combined approval (digit 4 = "" only) AX - Flameproof enclosures & Intrinsic afety combined approval (digit 4 = "" & "W" only) ICx - Flameproof enclosures & Intrinsic afety combined approval (digit 4 = "" & "W" only) FM - xplosion-roof & Intrinsic afety combined approval (digit 4 = "" only) Mounting design (*4) Ambiant temperature correction B Capillary ransmitter and diaphragm seal assembly L igid - long design ransmitter and diaphragm seal assembly M igid - short design ransmitter and diaphragm seal assembly G Capillary ransmitter igid - long design ransmitter igid - short design ransmitter tainless steel parts Operat. pressure (bar) Bolts/nuts ag plate Housing & mounting bracket 1 Y (*6) (*5) None (capillary mounting) None None 2 Y (*6) (*5) None (capillary mounting) Yes None 3 Y (*6) (*5) None (capillary mounting) None Yes 4 Y (*6) (*5) None (capillary mounting) Yes Yes Y Y (*6) Carbon steel None None B Y (*6) Carbon steel Yes None C Y (*6) Carbon steel None Yes Y (*6) Carbon steel Yes Yes A Y (*6) 316(L)/ 316(L) None None D Y (*6) 316(L)/ 316(L) Yes None F Y (*6) 316(L)/ 316(L) None Yes G Y (*6) 316(L)/ 316(L) Yes Yes H Y (*6) (*8) p 100 bar 660/ 660 None None J Y (*6) (*8) p 100 bar 660/ 660 Yes None K Y (*6) (*8) p 100 bar 660/ 660 None Yes L Y (*6) (*8) p 100 bar 660/ 660 Yes Yes Notes* : 1- urn down of 100:1 is possible, but should be used at the span greater than 1/10 of the maximum span for better performance. 4- ransmitter with capilary design has a standard mounting bracket - rigid monting design are always without monting bracket 7- Code D & V FM approval only possible with electrical connection 1/2-14 N 8- Our bolts/nuts in 660 are in conformity with the NAC M 0175/IO requirements and must be used for NAC M 0175/IO service. 7
8 FKB, FKD, FKM...F Diaphragm seals designed by Fuji lectric are used to measure accurately liquid level, density on open use of the diaphragm seal(s) avoid(s) that the measuring cell is directly in contact with the process. he welded seal construction assures excellent reliability in high temperature and high corrosive, viscous, sticking, crystallizable and abrasive process conditions. DIAHAGM AL() FAU 1- Construction he diaphragm seals are mounted on differential, gauge and absolute pressure transmitters of FCX-AII series. he seal can be rigid, (direct) mounted on the transmitter or with capillaries between the seal and the transmitter. he construction is an all welded design without any gasket with the suitable oil for your application. 2- Operating principle he measuring pressure is applied on the diaphragm seal and measuring cell of the pressure transmitter. 3- arts materials Wetted parts materials (diaphragm and gasket face) are in stainless steel, antalum, Hastelloy, Monel, itanium, Zirconium, Nickel, depending on the application requirements. Other parts are in stainless steel : capillary tube, reduced volume Fluorinated oil, sanitary oil, high temperature oil and vacuum 4- Diaphragm seal types According to the mounting and operating conditions different seal types can be useful : Flush mounting design from DN40 to DN100. eals with extensions (50 to 200 mm). Flanged, screwed or weld neck adaptors eals for sanitary applications according DIN, M or ri- Clamp standards. CIFICAION Diaphragm seal application : he seal(s) can be mounted direct or rigid on the transmitter (for example for liquid level measurement at the bottom of the tank) or capillary mounted to distance the measuring point away from the transmitter (for example in case of high process temperature). he rigid mounted seal can be assembled in a long design or in a short (compact) design according to the physical dimension requests of the customer (see outline dimensions drawings). igid mounting Capillary mounting FKB short or long design H side FKM short or long design H side FKD see datasheet of level H and L side transmitter (FK) H side L side tandard capillary lengthes : 1,5 / 3 / 6 m (other upon request) Inside diameter : 1 mm standard 2 mm for vacuum service, high process temperature applications, short response time requirements mallest bending radius of the capillary : 100 mm Capillary tube sheald possibilities : emperature limit : VC sheald : -10 à 80 C tainless steel sheald : -40 à 350 C rocess connection possibilities : he diaphragme seals can be: - Flush mounting design - xtension mounting he adaptors mounting can adapte the remote seals to special connection and to increase the sensibilty of the transmitter during special process conditions. 8
9 emperature limits : Ambiant temperature : -40 to 85 C for transmitter rocess temperature : -40 to 150 C for rigid mounting, ressure limits : Working pressure : Limited by the static pressure or the working pressure of the seal (N). (lease take the smallest of both) Vacuum limit : of the seal. For a differential or gauge pressure transmitter the lowest vaccum is 20 orr or 27 mbar abs. Only the absolute pressure transmitter can be used till absolute zero (FKM). For the utilization of vacuum service < 20 orr, please consult Fuji lectric. he absolute pressure transmitter has to be used. o calculate the total performance, both the transmitter and the diaphragm seals performances have to be added. 316L, analogic output 4/20 ma at linear mode) Accuracy : he assembling of 1 or 2 diaphragm seals on a transmitter increases the accuracy error at reference conditions of 0,1% of the span. Ambiant temperature effect : ffect when transmitter alone is corrected. (ee digit 11 code G,, of the code symbols FKB and FKM and code G, H of the code symbols FKD). eals DN 50 / 2 DN 80 / 3 DN 80 / 3 DN 100 / 4 Adaptor diaphr. diaphr. other diaph. diaphr. diaphr. ransmitters materials FKB/FKM - gauge /abs pressure capillary(m) FKD - differential pressure capillary (m) rocess temperature effect : (mbar/10 C) eals DN 50 / 2 DN 80 / 3 DN 80 / 3 DN 100 / 4 Adaptor Other diaph. for transmitters diaphragm diaphragm material. diaphragm diaphragm FKB/FKM FKD diaphragms (FKD transmitter with DN80 and DN100 seals) : Zero shift : digit 7 at 25 C 0 to 0 to 320 mbar 1.3 bar td silicone oil Y, G 0,95 0,15 0,037 Fluorinated oil W,A,D 1,84 0,17 0,04 Oil for vaccum or U, X 1,07 0,25 0,065 high temperature esponse time : (mean values) he indicated values are in seconds per meter of capillary length with internal tube diameter Ø 1 mm. he indicated response time is based on a pressure change of 0 to 100% of the calibrated span at reference temperature of 20 C. he indicated values do not include the response time of the transmitter. Code Designation emperature resistance ( C) Density Y ilicone oil -40 to to 120 0,95 W Fluorinated oil -20 to to 120 1,84 V ilicone oil 20 to 200 1,07 U ilicone oil 0 to to 200 1,07 X ilicone oil -10 to to 200 1,09 he indicated values and limits are indicated for the most lease consult Fuji lectric for special applications indicating your temperature, pressure and vacuum conditions (vacuum and temperature can occure together). Note : the indicated values are in mbar/10 C for capillary length of 1m and internal capillary tube ø of 1 mm ffect when transmitter and the seal assembly is corrected. and FKM). According to the complete transmitter design (transmitter and seals), a strong correction of the zero drift can be realized by an additional temperature correction operation on the complete transmitter unit (trasnmitter and seals). A thermal isolation or a heating of the capillaries minimises the ambient temperature effect. 9
10 FKB, FKD, FKM...F COD YMBOL DCIION A W Flanged axial diaphragm seal connection Flanged radial diaphragm seal connection - Not possible with rigid mounting design digit 6 : code Wafer type - Not possible with rigid mounting design digit 6 : code (*1) Flanges F (Flange size and rating) 4 ANI-150LB 3''-IO N 20 DN 80 5 ANI-150LB 4''-IO N 20 DN ANI-300LB 3"-IO N 50 DN 80 7 ANI-300LB 4"-IO N 50 DN DIN N40 DN80 9 DIN N16 DN100 H (*2) ANI-150LB 2''-IO N 20 DN 50 J (*2) ANI-300LB 2''-IO N 50 DN 50 G (*2) DIN N40 DN50 U N 25 / DN 50 - coupling nut DIN design material code "V" only V N 40 / DN 50 - coupling nut M material code "V" only W N 40 / DN 50 - seal only Clamp material code "V" only X No dead volume anitary material code "V" only A (*3) Flange adaptor N 40 DN 25 material code "V" - others U B (*3) Flange adaptor IO N 20 DN 25 (1"-150 ANI) material code "V" - others U C (*3) Flange adaptor IO N 50 DN 25 (1"- 300 ANI) material code "V" - others U D (*3) Flange adaptor N 40 DN 40 material code "V" - others U (*3) Flange adaptor IO N 20 DN 40 (1"1/2-150 ANI) material code "V" - others U F (*3) Flange adaptor IO N 50 DN 40 (1"1/2-300 ANI) material code "V" - others U (*3) crewed 1/2 N material code "V" - others U (*3) o be welded (pipe 2"1/2) material code "V" - others U Diaphragm seal material Diaphragm Flange raised face Flange V 316 L 316 L 316 L H (*7) Hastelloy-C Hastelloy-C 316 L B (*7) Monel Monel 316 L (*7) antalum antalum 316 L C (*9) (*7) itanium (*9) (*7) Zirconium (*7) 316 L + gold coat itanium Zirconium 316 L 316 L 316 L 316 L F (*4) (*7) 316L + FA lining 316 L + FA lining 316 L Diaphragm seal design Y Flush mounting A Diaphragm extension 50 mm B Diaphragm extension 100 mm material code "V" - digit 4 C Diaphragm extension 150 mm D Diaphragm extension 200 mm Diaphragm extension 50 mm F Diaphragm extension 100 mm material code "H" - digit 4 G Diaphragm extension 150 mm H Diaphragm extension 200 mm J Diaphragm extension 50 mm K Diaphragm extension 100 mm material code "B" - digit 4 L Diaphragm extension 150 mm M Diaphragm extension 200 mm Diaphragm extension 50 mm Diaphragm extension 100 mm material code "" - digit 4 Diaphragm extension 150 mm Diaphragm extension 200 mm ransmission diaphragm seal to measuring cell Mounting design Capillary length Capillary design A Capillary 1,5 m VC protection B Capillary 3 m VC protection C Capillary 6 m VC protection D Capillary Upon request VC protection G (*5) Capillary 1,5 m sheald H (*5) Capillary 3 m sheald K (*5) Capillary 6 m sheald L (*5) Capillary Upon request sheald igid design - not possible with digit 2 =, W - max. process temperature : 150 C pecial applications and fill fluid for the diaphragm seal only reatment Fill fluid Y None (standard) ilicone oil W None (standard) Fluorinated oil F None (standard) anitary fill fluid D Chlorine service Fluorinated oil G Degreasing ilicone oil A Oxygen service Fluorinated oil - material code ''V'' only N NAC ilicone oil V (*6) Vacuum - max temperature 200 C ilicone oil U (*6) Very high temperature (0 to 300 C) - No vacuum X (*6) Very high temperature (20 to 350 C) - No vacuum pecial options or design - * (*8) pecial, no code available 10
11 * Notes : *2 Only available with span higher than : 0 to 0,5/5 bar - max process temperature : 150 C - or ask FUJI with operating conditions *3 Axial diaphragm seal connection - no extension possible *4 Not possible with digit 7 : V, H, *5 ecommended for Vacuum or High emperature applications > 120 C - (Capillary internal diameter = 2mm) *8 When no code can be found in the current code symbols, place "*" in concerned code digit(s)and add "*" in 8th digit *9 Max process temperature 150 C MC Directive (2004/108/C) All models of FCX series transmitters type FCX-AII are in accordance with : the harmonized standards: - N : 2006 (lectrical equipment for measurement, control and laboratory use - MC requirements). criteria for tranducers with integrated or remote signal conditioning) mission limits : N : 2006 Frequency range (MHz) Limits Basic standard 30 to db (μv/m) quasi peack, measured at 10m distance N / CI 11 Group 1 Class A 230 to db (μv/m) quasi peack, measured at 10m distance Immunity requirements : N : 2006 (able 2) henomenon est value Basic standard erformance criteria lectrostatic discharge (D) 4 kv (Contact) N B 8 kv (Air) IC V/m (1.4 to 2.0 GHz) IC A 1 V/m (2.0 to 2.7 GHz) ated power frequency 30 A/m N A Burst 2 kv (5/50 N, 5 khz N B IC urge 1 kv Line to line N B 2 kv Line to line IC Conducted F 3 V (150 khz to 80 MHz) N A IC erformance criteria : A B : During testing, temporary degradation or loss of function or performance which is self-recovering. 11
12 FKB, FKD, FKM...F Outline dimensions for rigid mounted diaphragm seal on a gauge or an absolute pressure transmitter (unit:mm) - Dimensions of seals - efer to page 18 and 19 hort mounting design G F W OU / WIGH : 4 kg (WIHOU OION) ADD : - FLANG WIGH ( ABL) - 0,8 kg FO INDICAO OION - 2 kg FO AINL L HOUING OION l A 12
13 Long mounting design W F G l WIGH : 4 kg (WIHOU OION) ADD : - FLANG WIGH ( ABL) - 0,8 kg FO INDICAO OION - 2 kg FO AINL L HOUING OION A 13
14 FKB, FKD, FKM...F Outline dimensions for capillary mounted diaphragm seal(s) on a differential pressure transmitter (units:mm) - Dimensions of seals - efer to page 18 and 19 Code X4 W F G WIGH : 3,5 kg (WIH OION) ADD : - FLANG WIGH ( ABL) - 1 kg 50 mm XNION - 0,8 kg FO INDICAO OION - 2 kg FO AINL L HOUING OION l A A 14
15 W F G WIGH : 3,5 kg (WIH OION) ADD : - FLANG WIGH ( ABL) - 1 kg 50 mm XNION - 0,8 kg FO INDICAO OION - 2 kg FO AINL L HOUING OION l A A 15
16 FG FKB, FKD, FKM...F Outline dimensions for capillary mounted diaphragm seal(s) on a gauge or an absolute pressure transmitter (units:mm) - Dimensions of seals - efer to page 18 and 19 LCICAL CONNCION D D M WIGH : 3,5 kg (WIHOU OION) ADD : - FLANG WIGH ( ABL) - 0,8 kg FO INDICAO OION - 2 kg FO AINL L HOUING OION G H J F K M FKM 0,016 bar abs 0,16 bar abs FKM 0,013 bar abs 1,3 bar abs FKM 0,05 bar abs 5 bar abs FKM 4 0,3 bar abs 30 bar abs 16
17 W F G OU / l WIGH : 3,5 kg (WIHOU OION) ADD : - FLANG WIGH ( ABL) - 1 kg 50 MM XNION - 0,8 kg FO INDICAO OION - 2 kg FO AINL L HOUING OION A F K M FKM 0,016 bar abs 0,16 bar abs FKM 0,013 bar abs 1,3 bar abs FKM 0,05 bar abs 5 bar abs FKM FKM 4 5 0,3 bar abs 1 bar abs 30 bar abs 100 bar abs 17
18 FKB, FKD, FKM...F Outline dimensions of the standard diaphragm seals - Flush/extension (units : mm) DN 50, 80, 100 Ø FLANG DIMNION ACCODING DIN 2501 B16.5 G L t DIN / IO ANI N DN N NW ØD Ø ØF G ØH t N x Øh x x x 14 Ø H Ø F Ø D x x x lbs 1/ , x lbs 3/ x lbs , x lbs 1/ , x lbs 3/ , x lbs x lbs ,5 92 1, x lbs , , x lbs , , x lbs , ,5 8 x lbs , , x lbs , x 22 Outline dimensions of diaphragm seals with adaptors (units : mm) Flange adaptor crewed adaptor FLANG DIMNION DIN AINI ØD Ø ØF Cmin f1 A ØM N DN e DN N ØH , ,5 4 15,8 50,8 16 1, , ,8 17,5 1, , , / ,4 4 15, , / ,3 4 22, , ,2 18
19 Outline dimensions of sanitary diaphragm (units : mm) he seals for the sanitary and pharmaceutical applications are available DIN, M and ri Clamp standards eals according DIN and M standard 2 different designs exist for DIN and M : (d M = diaphragm actif diameter) Coupling nut design DIN DN N (Max) D h d M G d 52 x 1/ d 58 x 1/ d 65 x 1/ d 78 x 1/ d 95 x 1/ d110 x 1/4 Male thread design d M DN G h M DN N (Max) D h d M G d 40 x 1/ d 48 x 1/ d 60 x 1/ d 70 x 1/ d 85 x 1/ d 98 x 1/4 ri Clamp design DN N (Max) D h d M 1 1/ , / , Dead volume seal ø43, DN25 NU (DIN 11851) ø36 ø40 Diaphragm 19
20 FKB, FKD, FKM...F CONNCION DIAGAM Fuji lectric France.A.. 46 rue Georges Besse - ZI du brézet Clermont ferrand él : Fax : Mail : sales.dpt@fujielectric.fr - web : Fuji lectric can accept no responsability for possible errors in catalogues, brochures and other printed material. Fuji lectric reserves the right to alter its products without notice. his also applies to products already on order provided that such alterations can be made without subsequential changes being necessary
Fuji Electric France S.A.S. ABSOLUTE, DIFFERENTIAL AND GAUGE PRESSURE TRANSMITTER FOR REMOTE SEAL(S) FEATURES FUNCTIONAL SPECIFICATIONS
ABOLU, DIFFNIAL AND GAUG U ANMI FO MO AL() DAA H FKB, FKD and FKM models of FCX-AII V5 series of pressure transmitters accurately measure a gauge, differential or absolute pressure and transmit a proportional
More informationFuji Electric France S.A.S. ABSOLUTE PRESSURE TRANSMITTER FEATURES SPECIFICATIONS FKH...5 DATA SHEET
ABSOLUTE PRESSURE TRANSMITTER DATA SHEET FKH...5 The FCX-AII absolute pressure transmitter (direct mount type) accurately measures absolute pressure and transmits proportional 4 to 20 ma signal. The transmitter
More informationFUNCTIONAL SPECIFICATIONS
DATA SHEET The ProcessX differential pressure (flow) transmitter accurately measures differential pressure, liquid leel, gauge pressure or fl ow rate and transmits a proportional 4 to 20mA signal. The
More informationPRESSURE TRANSMITTER <SANITARY TYPE> FKB...4
DT HEET REMOTE EL TYPE PREURE TRNMITTER FK...4 The FCX 2 pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20m signal. The transmitter utilizes a unique
More informationFKB... 4 Pressure Transmitter <Sanitary Type> (Remote Seal Type)
FK... 4 Pressure Transmitter (Remote eal Type) GENERL The FCX 2 pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20m signal. The transmitter utilizes
More informationFuji Electric France S.A. ABSOLUTE AND GAUGE PRESSURE TRANSMITTER FOR REMOTE SEAL DATASHEET FEATURES SPECIFICATIONS. Functional specifications
ABSOLUTE AND GAUGE PRESSURE TRANSMITTER FOR REMOTE SEAL DATASHEET FKP, FKH...F The FCX-AII pressure transmitter accurately measures gauge pressure and level and transmits proportional 4 to 20mA signal.
More informationA New Generation Of Pressure Transmitters -AII V5. ECNO : 610f
A New Generation Of Pressure Transmitters -AII V5 ECNO : 610f A New Transmitter at the edge of Technology - - - - - -AII V5 2 - Approvals Fieldbus (FF) Protocols TM Hart /Fuji (bilingual) PROFIBUS The
More informationA New Generation of Pressure Transmitters
e-front runners A New Generation of Transmitters SeriesAII/CII ECNO : 610d A New addition to the FCX Family at the edge of Technology As a leader in the field of pressure measurement, Fuji Electric has
More informationABSOLUTE PRESSURE TRANSMITTER (DIRECT MOUNT TYPE)
ABSOLUTE PRESSURE TRANSMITTER (DIRECT MOUNT TYPE) DATA SHEET FKH...5 The FCX AIII absolute pressure transmitter (Direct mount type) accurately measures absolute pressure and transmits proportional 4 to
More informationA New Generation of Pressure Transmitters
Fuji Electric Instrumentation & Control A New Generation of Transmitters ECNO : 610d A New addition to the FCX Family at the edge of Technology As a leader in the field of pressure measurement, Fuji Electric
More informationLEVEL TRANSMITTER <SANITARY TYPE>
LEVEL TRNSMITTER DT SHEET FKE...4 The FCX 2 level transmitter accurately measures liquid level and transmits a proportional 4 to 20m signal. The transmitter utilizes a unique micromachined
More informationA New Generation Of Pressure Transmitters -AII V5. ECNO : 610e
A New Generation Of Pressure Transmitters -AII V5 ECNO : 610e A New Transmitter at the edge of Technology As a leader in the field of measurement, Fuji Electric has an installed base of more than 1 000
More informationFuji Electric France S.A.S. PRESSURE TRANSMITTER (DIRECT MOUNT TYPE) FEATURES SPECIFICATIONS FKP...5 DATA SHEET. Functional specifications.
PRESSURE TRANSMITTER (DIRECT MOUNT TYPE) DATA SHEET FKP...5 The FCX-AII pressure transmitter accurately measures gauge pressure and transmits proportional 4 to 20mA signal. The transmitter utilizes the
More informationPRESSURE TRANSMITTER (DIRECT MOUNT TYPE)
PRESSURE TRNSMITTER (DIRECT MOUNT TYPE) DT SHEET FKP...5 The FCX III pressure transmitter accurately measures gauge pressure and transmits proportional 4 to 20m signal. The transmitter utilizes the unique
More informationFKD... 4 Differential Pressure Transmitter (Remote Seal Type)
F... 4 ifferential ressure ransmitter (Remote eal ype) NR he FX 2 pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 2m signal. he transmitter utilizes a unique micromachined
More informationFuji Electric France S.A.S. ABSOLUTE PRESSURE TRANSMITTER
ABSOLUTE PRESSURE TRANSMITTER DATA SHEET FKH...5 The FCX-AII absolute pressure transmitter (direct mount type) accurately measures absolute pressure and transmits proportional 4 to 20mA signal. The transmitter
More informationFKA...5. Absolute pressure transmitter. Data sheet. Features
Data sheet The ProcessX absolute pressure transmitter accurately measures absolute pressure and transmits a proportional 4 to 20 m signal. The transmitter utilizes a unique micromachined capacitance silicon
More informationFKP... 5 PRESSURE TRANSMITTER (DIRECT MOUNT TYPE) FEATURES SPECIFICATIONS. Functional specifications
FKP... 5 PRESSURE TRNSMITTER (DIRECT MOUNT TYPE) The FCX III pressure transmitter accurately measures gauge pressure and transmits proportional to 20m signal. The transmitter utilizes the unique micromachined
More informationFKP...5. Pressure transmitter (direct mount type) DATA SHEET FEATURES. Functional specifications
DT SHEET The ProcessX pressure transmitter accurately measures gauge pressure and transmits proportional 4 to 20 m signal. The transmitter utilizes the unique micromachined capacitie silicon sensor with
More informationPressure transmitter (Direct mount type) Caractéristique fonctionnelles FKP* { } {1.3} FKP* {0.
DT SHEET The ProcessX pressure transmitter accurately measures gauge pressure and transmits proportional 4 to 20m signal. The transmitter utilizes the unique micromachined capacitie silicon sensor with
More informationFKH...5. Absolute pressure transmitter DATA SHEET FEATURES SPECIFICATIONS. Functional specifications
DT SHEET The ProcessX absolute pressure transmitter (direct mount type) accurately measures absolute pressure and transmits proportional 4 to 20m signal. The transmitter utilizes the unique micromachined
More informationFunctional safety and safety integrity
LES REGULATEURS GEORGIN A more than 70 years experience Established in 1939, the company has constantly grown by widening the range of its activities around two areas of expertise: industrial instrumentation
More informationPRESSURE TRANSMITTER FKB...4
FX RI RO Y RUR RNIR F...4 he FX 2 pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 2m signal. he transmitter utilizes a unique micromachined capacitance silicon
More informationRosemount Specifications. Product Data Sheet , Rev BA February 2009 PERFORMANCE SPECIFICATIONS
Rosemount 2051 Product Data Sheet PERFORMANCE SPECIFICATIONS Specifications For zero based spans, reference conditions, silicone oil fill, SST materials, Coplanar flange () or 1 /2 in. - 14 NPT () process
More informationABSOLUTE PRESSURE TRANSMITTER
ABSOLUTE PRESSURE TRANSMITTER DATA SHEET FKA...5 The FCX -AIII absolute pressure transmitter accurately measures absolute pressure and transmits a proportional 4 to 20mA signal. The transmitter utilizes
More informationFKG... 5 PRESSURE TRANSMITTER FEATURES SPECIFICATIONS. Functional specifications
FKG... 5 PRESSURE TRANSMITTER The FCX AIII pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20mA signal. The transmitter utilizes a unique micromachined capacitance
More informationPAD - Heavy Duty Differential Pressure Trasmitter
Benefits and Features Span: 0.3" W.C. 6" W.C. to 60 6000 PSIG Static Pressure: Max. 4500 PSIG t max : 248 F Process Connection: ½" NPT, ¼" NPT, or Various Diaphragm Seals Available upon Request Material:
More informationFCX. Series AII & AIIe Electronic Transmitters. Barton
Barton FCX Series AII & AIIe Electronic Transmitters Compact Cost Effective Reduced Cost of Ownership Ideal for: Oil/Gas Power Chemical Water/Waste Water General Industrial Food/Beverage A single silicon
More informationFKE...F. Level transmitter DATA SHEET FEATURES SPECIFICATIONS
DT SHEET The ProcessX leel transmitter accurately measures absolute pressure and transmits proportional 4 to 20m signal. The transmitter utilizes the unique micromachined capacitie silicon sensor with
More information2600T Series Pressure Transmitter Model 264DS Differential Pressure Transmitter. Kent-Taylor
INDUSTRIAL INSTRUMENTS AND CONTROLS SPECIALIST Kent-Taylor 2600T Series Pressure Transmitter Model 264DS Differential Pressure Transmitter Features Include Base accuracy : ±0.075% Span limits 0.134 to
More informationFKE...5. Level transmitter DATA SHEET FEATURES. Functional specifications
Leel transmitter DT SHEET The ProcessX leel transmitter accurately measures liquid leel and transmits a proportional 4 to 20 m signal. The transmitter utilizes a unique micromachined capacitance silicon
More informationAPT3200L SMART PRESSURE TRANSMITTER. Application Areas: WITH DIAPHRAGM SEAL
WITH DIAPHRAGM SEAL APT3200L Application Areas: Nuclear Water & Wastewater Chemicals Petrochemical Oil & Gas Pulp & Paper Food & Beverage, Pharmaceutical Power Renewable Energy Alternate Fuel Autrol America
More informationGeneral Specifications
General Specifications EJA530E S-Series Cherry Burrell I Line Sanitary Pressure Transmitter GS 530SCBS-01E The EJA530E S-Series sanitary pressure transmitters combine Yokogawa s EJA-E series in-line pressure
More informationSTD96. Universal Pressure Transmitter with local LCD Display
TD96 Universal Pressure Transmitter with local LCD Display TD96 Universal Pressure Transmitter with local LCD Display Characteristics Ideal for various industrial process environments Robust Aluminum or
More informationFKY Small Flange Level Transmitter GENERAL FEATURES SPECIFICATIONS. Functional specifications
FKY... 4 mall Flange Level Transmitter GNRL The FX 2 small flange level transmitter accurately measures liquid level and transmits a proportional 4 to 20m signal. The transmitter utilizes a unique micromachined
More informationIntrinsically safe pressure transmitter MBS 4201, MBS 4251, MBS 4701 and MBS 4751
Data sheet Intrinsically safe pressure transmitter MBS 420, MBS 425, MBS 470 and MBS 475 The intrinsically safe pressure transmitter program is designed for use in hazardous environments and offers a reliable
More informationProcess transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm
Electronic pressure measurement Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm WIKA data sheet PE 86.05 Applications Process technology Machine building and plant
More informationField IT 2600T Series Pressure Transmitters
Data Sheet Field IT 2600T Series Pressure Transmitters Model 364GS Gauge Model 364AS Absolute standard overload Best in class total performance long term stability of 0.25% for 10 years base accuracy of
More informationFuji Electric France S.A. PRESSURE TRANSMITTER
PRESSURE TRANSMITTER ATA SHEET The FCX AII pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20mA signal. The transmitter utilizes a unique micromachined capacitance
More informationFuji Electric France S.A.S. INSTRUCTIONS MANUAL and SERVICE INSTRUCTIONS "FCX-AII-V5" SERIES TRANSMITTERS
INSTRUCTIONS MANUAL and SERVICE INSTRUCTIONS "FCX-AII-V5" SERIES TRANSMITTERS Type : FKC...5 FKG...5, FKP...5 FKA...5, FKH...5 FKE...F FKD, FKB, FKM...F FKP, FKH...F Fuji Electric France S.A.S. TN5FCXA2V5h-E
More informationProcess pressure transmitter Model IPT-10, standard version Model IPT-11, flush diaphragm
Electronic pressure measurement Process pressure transmitter Model IPT-10, standard version Model IPT-11, flush diaphragm WIKA data sheet PE 86.11 Applications Process engineering Pharmaceutical industry
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More informationTEK-TEMP 2100A. Explosion-Proof Temperature Transmitter. TEMPERATURE. Technology Solutions
Technology Solutions TEK-TEMP 2100A Explosion-Proof Temperature Transmitter TEMPERATURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Trol s Explosion-Proof
More informationFIELD DEVICES - PRESSURE
FIELD DEVICES - PRESSURE Product Specifications Logo Models 15A, 13A, and 13HA Pneumatic d/p Cell Transmitters PSS 2B-1C1 A The Foxboro brand Models 15A, 13A, and 13HA pneumatic d/p Cell transmitters measure
More information11A Series Absolute Pressure Transmitters
Product Specifications 11A Series Absolute Pressure Transmitters PSS 2B-1A1 A 11 SERIES TRANSMITTER 11 SERIES TRANSMITTER 11 SERIES TRANSMITTER In 11A Series Transmitters, the reliable force-balance d/p
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Series 000 Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Series 000 000-SAN Cable with separate electronics Description
More informationPressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11
Electronic pressure measurement Pressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11 WIKA data sheet PE 81.27 for further approvals see page
More informationPRESSURE TRANSMITTER FEATURES SPECIFICATIONS FKG...4 DATA SHEET. Functional specifications
PRSSUR TRNSMITTR T SHT FKG...4 The FX 2 pressure transmitter accurately measures gauge pressure and transmits a proportional 4 to 20m signal. The transmitter utilizes a unique micromachined capacitance
More informationED701 General Industry Pressure Transmitter
ED701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationSubmersible pressure sensor For oils and fuels Model LF-1
Level measurement Submersible pressure sensor For oils and fuels Model LF-1 WIKA data sheet LM 40.04 Applications Level measurement in vessel and storage systems for oils and fuels Overfilling and dry-run
More informationDS 400 DS 400. Intelligent Electronic Pressure Switch Completely in Stainless Steel. piezoresistive stainless steel sensor
GmbH Postal address: House address Fon (+49) 0 22 42-870-0 Postbox 26 Löhestr. 7 Fax (+49) 0 22 42-870-20 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de Data Sheet Page /5 Intelligent
More informationDOC. NO. : C3200-E04A APPROVED. Smart PressureTransmitter for Gauge and Absolute Pressure Measurement MODEL APT3200
DOC. NO. : C3200-E04A FM APPROVED Smart PressureTransmitter for Gauge and Absolute Pressure Measurement MODEL APT3200 APT3200 Smart Pressure Transmitter Standard SST Housing Description of Product The
More informationUltrasonic level transmitter, non-contact
Ultrasonic level transmitter, non-contact Type 8175 can be combined with... Compact, remote versions for level measurement up to 10 m Multi language menu control Interference echo filter Automatic calibration:
More informationGeneral Specifications
General Specifications YTA70 Temperature Transmitter The YTA70 is the highly accurate temperature transmitter that accepts Thermocouple, RTD, ohms or DC millivolts inputs and converts it to a to 0 ma DC
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationTLR wire System Level Radar. MICROWAVE level meter GENERAL FEATURES OPERATION PRINCIPLE
2-wire System Level Radar TLR3000 MICROWAVE level meter GENERAL The TLR3000 is a non-contact type continuous level meter using microwaves. It detects a level by measuring a reciprocating time of a microwave
More information600T Series Transmitters Model 653L Electronic temperature transmitter (PC programmable for RTD and resistance) Specification Sheet
Specification Sheet 600T Series Transmitters Model 65L Electronic temperature transmitter (PC programmable for RTD and resistance) High flexibility and wide rangeability Primary element and calibration
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationNon-Submersible Industrial Pressure Transducer
Non-Submersible Industrial Pressure Transducer KPSI Transducers Series 27, 28, 30 FEATURES Custom Pressure Ranges up to 2000 (13,790 kpa) Accuracy to ±0.10% FS Analog Outputs of 4-20 ma or VDC Welded 316
More informationStrong monosilicon gauge pressure transmitter
Product introduction Description Strong monosilicon gauge pressure transmitter SMP858 monosilicon pressure transmitter is a high performance pressure transmitter with international leading technology meticulously
More informationAccutech DP20. Wireless differential pressure field unit
Accutech DP20 Wireless differential pressure field unit 1 The Accutech DP20 differential pressure field unit provides differential pressure data in a variety of ranges up to +/-300in H 2 0. Both traditional
More informationAPT3100 MODEL. Smart Pressure Transmitter. for Differential / Gauge / Absolute Pressure Measurement. Doc. No. : C3100-E05A
Doc. No. : C3100-E05A Smart Pressure Transmitter for Differential / Gauge / Absolute Pressure Measurement MODEL APT3100 Duon System Co.,Ltd. www.autrol.com Smart Pressure Transmitter APT3100 Standard Description
More informationDPharp OVERVIEW PRESSURE SENSORS INTRODUCTION FEATURES. Resonant silicon sensor
DPharp INTRODUCTION Yokogawa has more than 4 years experience in the development, design and manufacture of pressure sensors and pressure transmitters. The DPharp EJA series of digital pressure transmitters
More informationMHPS MHPS. Modular pressure transmitter. Technical documentation. Table of content. Characteristics - applications - technical data
Technical documentation Table of content Page 2: Page 3: Page 4: Page 5: Page 6: Page 7: Page 8: Characteristics - applications - technical data Technical data - input quantity - output quantity Electrical
More informationFlush pressure transmitter For viscous and solids-containing media Model S-11
Electronic pressure measurement Flush pressure transmitter For viscous and solids-containing media Model S-11 WIKA data sheet PE 81.02 Applications Machine building Hydraulic aggregates General industrial
More informationGeneral Specification
2001 Catalog General Specification WISE SENSOR INC. WISE SENSOR INC. C O N T E N T S Product guide for pressure measurement Product guide for level measurement Product guide for temperature measurement
More informationIntrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F,
More informationSmart Pressure Transmitter
DOC. NO. : C3200-E05A Smart Pressure Transmitter for Gauge and Absolute Pressure Measurement MODEL APT3200 Duon System Co.,Ltd. www.autrol.com AUTROL, AUTROL are trade mark of smart transmitter brand series
More informationDRS390 High stability, flange mounting
DRS 390 1 Monocrystalline silicon smart differential pressure transmitter DRS390 High stability, flange mounting Detailed Information Application the flow of gas, vapor and liquid measurement with device
More informationSubmersible pressure sensor For superior applications Model LF-1
Level Submersible pressure sensor For superior applications Model LF-1 WIKA data sheet LM 40.04 Applications Level measurement in vessel and storage systems Overfilling and no-load operation monitoring
More informationConductivity Transmitter
Conductivity Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma Removable backlighted display Universal process connection Type can be combined with... Three cell constants
More informationType PLC Fitting. Valve for Continuous control. Diaphragm valve. Output
Digital Inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationMobrey Ultrasonic. MSP422, MSP400RH, and MSP900GH Level Transmitters. Product Data Sheet February 2015 IP2045, Rev EA
Mobrey Ultrasonic Product Data Sheet February 215 IP245, Rev EA MSP422, MSP4RH, and MSP9GH Level Transmitters Non-contacting measurement with no moving parts Integral LCD and push-buttons as standard for
More information914DNS. Pressure and Density Transmitter. Features. 1 Datasheet 914DNS Pressure and density transmitter.
Pressure and Density Transmitter Features Pressure and density transmitter. Low maintenance, quick calibration and configuration. Installation directly into pressurized vessels. HART technology provides
More informationFeatures. Picture. Specifications. Pressure Transmitter 4-20mA 2-wire MPG Type: MPGxxxxxxxx for level measurement Order No.: see Table 1 / Page 4
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Pressure measurement relative or absolute Output signal 4-20 ma, adjustable
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationSeries Smart Pressure Transmitter
www.tek-trol.com TEK-BAR 3100 Series Smart Pressure Transmitter www.tek-trol.com 2 Introduction The Tek-Bar series of smart transmitters have excellent stability, high accuracy and include features that
More informationMonocrystalline silicon smart differential pressure transmitter. High stability. Benefits. application DRS
DRS 300 1 Monocrystalline silicon smart differential pressure transmitter DRS300 High stability Detailed Information application the flow of gas, vapor and liquid measurement with device (volume or mass
More informationDigital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
More informationElectro-Magnetic Flowmeters COPA-XE
Data Sheet Electro-Magnetic Flowmeters COPA-XE 10DX4311 Flowmeter system utilizes a smart microprocessor converter System accuracy of ± 0.5% of rate Field configurable via integral pushbuttons, eliminates
More informationSmart Displacer Level (Interface) Transmitter DLT100 Series
Smart Displacer Level (Interface) Transmitter DLT100 Series Equipped with FISHER FIELDVUE DLC3010 1 Introduction DLT100 series is Smart Displacer Level (Interface) Transmitter equipped with the original
More informationMODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With
Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationScrew-in resistance thermometers with plug connector
Data Sheet 90.2004 Page 1/7 s with plug connector for temperatures from -50 to +300 C highly resistant to shock and vibration connector locked in for reliable contact, IP65 or IP69K protection available
More informationATM.ECO - Analog Pressure Transmitter with Temperature Compensation
Pressure Transmitter ATM.ECO - Analog Pressure Transmitter with Temperature Compensation CUSTOMER BENEFITS Entry level series into precision pressure measurement High measurement accuracy is ensured by
More informationDesign and applications
Design and applications The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated
More informationFeatures. Picture. Specifications
Type: for level measurement Order No.: see Table 1 / Page 5 Features Picture Two wire system Piezoresistive measuring element Output signal 4-20 ma, adjustable within 1 : 4 of the nominal pressure Conformity
More informationThe transducer component converts the measured signal and displays the actual value.
Digital inductive conductivity transmitter System Integration Provides low Total Cost of Ownership PEEK/PPA version for CIP applications TEACH IN and SIMULATION Function Approval PVDF Version PEEK Version
More informationPressure measurement PBMR Fully welded pressure transmitter for railway applications
Fully welded pressure transmitter for railway Product highlights Ecellent accuracy and long term stability up to % FS Active temperature compensation over the entire operating temperature range Sensor
More informationSATRON VB Pressure Transmitter
SATRON VB pressure transmitter belongs to the series V transmitters. SATRON VB is userfriendly, through the ball valve mounted transmitter which is used for 04 kpa... 03 MPa ranges. The transmitter communicates
More informationSubmersible pressure sensor For water and wastewater Model LW-1
Replacement product: Model LF-1 Level measurement Submersible pressure sensor For water and wastewater Model LW-1 WIKA data sheet LM 40.03 Applications Level measurement in rivers and lakes Deep well and
More informationPressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 RD.5G.H4.02 Danfoss A/S (IC-MC/mr), 09-2004 Introduction AKS 32 and AKS 33 are pressure transmitters that
More informationTHERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED
age 1 of 5 THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED A thermowell is a thermally conductive socket recommended to: rotect the delicate instrument sensing elements against corrosive effects.
More informationPTG series Smart Pressure Transmitter
No. SS2-PTG300-0100 PTG series Smart Pressure Transmitter Model PTG71 / PTG72 OVERVIEW The Smart Pressure Transmitter model PTG is a high- performance, highly reliable gauge pressure transmitter. Based
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More information600T Series Transmitters. Specification Sheet. Model 653T Electronic temperature transmitter (PC programmable)
Specification Sheet 600T Series Transmitters Model 65T Electronic temperature transmitter (PC programmable) High flexibility and wide rangeability Single transmitter accepts RTD/THC/mV/ohm Galvanically
More informationTIDALFLUX 2300 F Technical Datasheet
Technical Datasheet Electromagnetic flow sensor for partially filled pipes Measurement in partially filled pipes up to DN1600 / 64" Patented, non-contact level measurement Measurement possible down to
More informationMJK Expert 700 / 800 / 900 / 1100 / 2100 MJK Expert 1400 / 3400
Data Sheet MJK Expert 700 / 800 / 900 / 1100 / 2100 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile We reserve the right to continuously improve our products and make any change in
More informationFLOMID FX Electromagnetic Flowmeter
FLOMID FX Electromagnetic Flowmeter Working pressure manufacturing according to PED 97/23/CE (Lloyd s Register Certificate Nº 031) Introduction Modular design in two versions: Compact, sensor and electronics
More informationINSTRUCTIONS MANUAL SERIES TRANSMITTERS. ProcessX.
INSTRUCTIONS MANUAL SERIES TRANSMITTERS ProcessX 2 fu-processx-en CAUTION : Rotating the upper assembly part : The upper assembly (housing and electronic unit) can be rotated by 90 left or right just by
More information