Table of Contents. Proximity Sensors. IEC Limit Switches. Encoders. Current Sensors. Section 17

Transcription

1 Proximity Section 17 Table of Contents Application Guide ACT Series Transducers ACTR Series Transducers ACS150 Series Switches ACS200 Series Switches ACSX Series Switches Photoelectric Section 18 IEC Limit Switches Section 19 Section 20 Section 21 NEW Product! 21 1

2 Switches and Transducers The ACUAMP series is a family of high performance current sensors offering outstanding features, flexibility and durability at an incredible price. Choose from a wide selection of Transducer and Switch models, all designed in a rugged industry standard feedthrough package, consisting of both fixed core and split core models. Each model has multiple input ranges (set by movable jumpers) for maximum flexibility across many current ratings. The current transducer output choices include 4-20 ma, 24 VDC loop-powered and 0-10 volt selfpowered analog outputs. The Switch outputs are isolated solid state switches and are available in Normally Open configurations. A unit featuring field adjustable time delay is also offered in the Switch series. All models are panel-mountable as standard, and convenient DIN-rail adapter accessories are available. Use the selection guide to find the best sensor module for your requirements. ACUAMP Specifications by Model Type Specifications Transducer Transducer with True RMS Switch Switch Switch Model ACT ACTR ACS150 ACS200 ACSX Input Range Range Jumper selectable: ACT005: 0 to 2 A, 0 to 5 A ACT050: 0 to 10 A 0 to 20 A, 0 to 50 A ACT200: 0 to 100 A, 0 to 150 A, 0 to 200 A -10 models: 0-10 VDC -42L models: 4-20 ma, loop-powered Jumper selectable: ACTR005: 0 to 2 A, 0 to 5 A ACTR050: 0 to 10 A 0 to 20 A, 0 to 50 A ACTR200: 0 to 100 A, 0 to 150 A, 0 to 200 A 4-20 ma, loop-powered true RMS -F core: 1 to 150 A -S core: 1.75 to 150 A VAC or VDC Jumper Selectable: -F core: 1 to 6 A, 6 to 40 A, 40 to 175 A -S core: 1.75 to 6 A, 6 to 40 A, 40 to 200 A Jumper Selectable: -F core: 1 to 12 A, 12 to 55 A, 55 to 175 A -S core: 2 to 12 A, 12 to 55 A, 55 to 200 A -AA Model: 240 VAC -AA Model: 240 VAC -AD Model: 30 VDC -AE Model: 240 VAC/VDC Frequency Range -10 models: 50 to 60 Hz sinusoidal waveforms only -42L models: Hz 10 to 400 Hz non-sinusoidal waveforms 6 to 100 Hz 6 to 100 Hz 50 to 100 Hz Response Time Sensing Aperture -10 models: 100 ms -42 models: 300 ms -F core: 0.75 (19mm) dia. -S core: 0.85 (21.6mm) sq. 600 ms 120 ms 40 to 120 ms -F core: 0.75 (19mm) dia. -S core: 0.85 (21.6mm) sq. -F core: 0.75 (19mm) dia. -S core: 0.85 (21.6mm) sq. -F core: 0.75 (19mm) dia. -S core: 0.85 (21.6mm) sq.. Field adjustable time delay: 0.2 to 15 seconds -F core: 0.75 (19mm) dia. -S core: 0.85 (21.6mm) sq

3 Application Guide ACUAMP are a great fit for many applications, including material handling, fan and pump applications, and heating systems. With two basic models, Transducers and Switches and Transducers Application Guide Switches, this sensor family is a great fit for almost any current sensor need, ranging from monitoring loads to preventive maintenance. Models with the ability to read True RMS non-sinusoidal waveforms make it easy to monitor applications containing variable frequency drives. Use the application examples to help choose the best sensor model for your application. DL05/06 DL105 DL205 DL305 DL405 Field I/O Pump Jam & Suction Loss Protection Heater Life Prediction Software Control Signal Input ACS Series Operated Switch I Switch or Transducer C-more HMIs Other HMI AC Drives s Steppers/ Servos Controls Pump Load Monitoring Variable Frequency Drive 0-10v or 4-20mA Input to Controller True RMS Transducer Use: ACTR Series - True RMS Proximity Photo Limit Switches Pushbuttons/ Lights Process Crusher/Grinder/Shredder Interlocks The performance of size reduction equipment like crushers or grinders can be optimized by controlling the in-feed in order to Help prevent jamming improve the uniformity of the resultant product Enhance overall production efficiency s Inputs Lamp Failure Detection ACS Series Operated Switch L1 Relays/ Timers Comm. TB s & Wiring Power s Inactive Relay Contact L2 Circuit Protection Enclosures Switch or Transducer When L1 fails, the current drops. The Operated Switch detects the drop in current and activates the relay which turns on the back-up lamp L2. The system may be configured fail-safe by using a Normally Open switch together with Normally Closed relay contacts Appendix Part Index 21 3

4 ACT Series Transducers ACT current transducers combine a current transformer and signal conditioner into a single package. The ACT series has jumper-selected current input ranges and industry standard 4-20 ma or 0-10 VDC outputs. The ACT series is designed for application on linear or sinusoidal AC loads and is compatible with most s, data loggers and SCADA systems. Full-scale input ranges are userselectable from 2A to 200 A. This series is available in split-core or fixed-core models. Applications Automation Systems Analog current reading for remote monitoring and software alarms Data Loggers Self-powered transducer helps conserve data logger batteries Split-core enclosures make using portable data loggers easy Panel Meters Simple connection displays power consumption or other motor status Features Five-year Warranty 4-20 ma or 0-10 VDC outputs Use up to 14 AWG copper wires Factory matched and calibrated single piece transducer is more accurate than traditional two-piece field installed products Average responding algorithm gives an RMS output on pure sine waves. Perfect for constant speed (linear) loads or On/Off loads Jumper-selectable input ranges allow end-users to tailor sensing ranges and improves the odds of having the right range for the job is magnetically isolated from the input for safety and to eliminate voltage drop Agency Approvals UL, cul, CE approvals accepted worldwide ACT Series Transducers Part Number Description Pcs/Pkg Wt/lb ACT F AC current transducer, 0-10 VDC output, fixed core ACT S AC current transducer, 0-10 VDC output, split core ACT F AC current transducer, 0-10 VDC output, fixed core ACT S AC current transducer, 0-10 VDC output, split core ACT005-42L-F AC current transducer, 4-20mA output, fixed core ACT005-42L-S AC current transducer, 4-20mA output, split core ACT050-42L-F AC current transducer, 4-20mA output, fixed core ACT050-42L-S AC current transducer, 4-20mA output, split core ACT200-42L-F AC current transducer, 4-20mA output, fixed core ACT200-42L-S AC current transducer, 4-20mA output, split core Accessories DRA-2 DIN rail adapters, 1.69 x0.39 x0.75 (43x10x19 mm) ACT Series Specifications -10 Models -42L Models Power Supply Self-powered 24 VDC loop nominal, (40 VDC max) Loop-powered Signal 0-10 VDC 4-20 ma, Loop-powered Limit 15 VDC 32 ma Accuracy 1% full scale 1% full scale Response Time (10-90% step change) 100 ms 300 ms Input Ranges Field selectable from A Sensing Aperture -F core: 0.75 (19 mm) diameter; -S core: 0.85 (21.6 mm) sq. Isolation Voltage UL listed to 1,270VAC. Tested to 5,000 VAC (1 minute max) Frequency Range (for sinusoidal waveforms) 50 to 60 Hz 20 to 100 Hz Case UL 94V-0 flammability rated Environmental Temperature -4 to 122 F (-20 to 50 C) Humidity 0 to 95% RH, non-condensing Agency Listings UL listed 508, UL file E222847, CE approved Model ACT005 ACT050 ACT200 Maximum Input Ranges Maximum Input Amps Range Continuous 6 Sec max 1 Sec max 0 to 2A to 5A to 10A to 20A to 50A to 100A to 150A to 200A

5 Dimensions (in/mm) 3.03 " 77.0mm Ø 0.19 " 4.8mm 2.40 " 61.0mm ACT Series Transducers 0.93 " 23.6mm Ø 0.74 " 19mm 1.1 9" 30.2 m m 3.04" 77.3 m m 89.7 m m 2.40" 61m m Ø 0.19 " 4.8 m m DL05/06 DL105 DL205 DL305 DL405 Field I/O Software 2.18 " 3.50 " 88.9mm -F Style 0.85" 21.7 m m 0.86 " 21.7 m m 2.2 5" 57.2 m m -S Style C-more HMIs Other HMI AC Drives s 4 20mA Option 24 VDC Power ( ) (+) Load (+) (Controller, Meter, etc.) ( ) Steppers/ Servos Controls Proximity (VDC) Loop Power Range Jumper 0 10 VDC Option Range Jumper ( ) 2(+) 1( ) 2(+) Terminals are #6 screws. Notes: V L = 12VDC + (R L 0.020A) where V L = Minimum Loop Supply R L = Total Loop Resistance (Ohms) Captive screw terminals. Use AWG solid or stranded Observe polarity. >1M Recommended 100k Acceptable Power Supply (4 20mA output only) Operator Interface Panel Operating Range Total Loop Impedance (Ohms) Input to Controller Transducer, even on VFDs or SCRs Photo Limit Switches Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index 21 5

6 ACTR Series Transducers The ACTR transducers combine a current transformer and a True RMS signal conditioner into one. These transducers are available in 4 to 20 ma output only. The ACTR Series provides True RMS output on distorted waveforms found on VFD or SCR outputs, and on linear loads in noisy power environments. Choose from fixed or split-core style. Applications VFD Controlled Loads VFD output indicates how the motor and attached load are operating SCR Controlled Loads Accurate measurement of phase angle fired or burst fired (time proportioned) SCRs. measurement gives faster response than temperature measurement Switching Power Supplies and Electronic Ballasts True RMS sensing is the most accurate way to measure power supply or ballast input power Features Five-year Warranty 4-20 ma output only True RMS technology is accurate on distorted waveforms like VFD or SCR outputs Choice of jumper-selectable ranges reduces inventory and eliminates zero and span pots. is magnetically isolated from the input for safety and eliminates voltage drop Agency Approvals UL, cul, CE approvals accepted worldwide Why use ACTR transducers? The current waveform of a typical linear load is a pure sine wave. In VFD and SCR applications, however, output waveforms are rough approximations of a sine wave, and are non-sinusoidal. There are numerous spikes and dips in each cycle. ACTR transducers use a mathematical algorithm called True RMS, which integrates the actual waveform over time. The output is the amperage component of the true power (heating value) of the AC current waveform. ACTR Series Transducers Part Number Description Pcs/Pkg Wt/lb ACTR005-42L-F AC current transducer with true RMS, 4-20mA output, fixed core ACTR005-42L-S AC current transducer with true RMS, 4-20mA output, split core ACTR050-42L-F AC current transducer with true RMS, 4-20mA output, fixed core ACTR050-42L-S AC current transducer with true RMS, 4-20mA output, split core ACTR200-42L-F AC current transducer with true RMS, 4-20mA output, fixed core ACTR200-42L-S AC current transducer with true RMS, 4-20mA output, split core Accessories DRA-2 DIN rail adapters, 1.69 x0.39 x0.75 (43x10x19 mm) True RMS is the only way to accurately measure distorted AC waveforms. Select ACTR transducers for nonlinear loads or in noisy power environments. Maximum Input Ranges Maximum Input Amps Model Range Continuous 6 Sec max 1 Sec max 0 to 2A ACTR005 0 to 5A to 10A ACTR050 0 to 20A to 50A to 100A ACTR200 0 to 150A to 200A Power Supply Signal Limit Accuracy Response Time (10-90% step change) Input Ranges Sensing Aperture Isolation Voltage Frequency Range Case Environmental Agency Listings ACTR Series Specifications -42L Models Temperature Humidity 24 VDC nominal, (12-40 VDC) Loop-powered 4-20 ma, loop-powered, true RMS 23 ma 1% full scale 600 ms Field selectable from A -F core: 0.75 (19 mm) dia. -S core: 0.85 (21.6 mm) sq. UL listed to 1,270VAC. Tested to 5,000 VAC (1 minute max) 10 to 400 Hz UL 94V-0 flammability rated 4 to 122 F ( 20 to 50 C) 0 to 95% RH, non-condensing UL listed 508, UL file E222847, CE approved

7 ACTR Series Transducers DL05/06 Dimensions (in/mm) 3.03" mm " 77.0mm Ø 0.19" Ø 4.8mm 0.19 " 2.40" 4.8mm 2.40 " 61.8mm 61.0mm Ø 0.74" 19mm 2.18 " " " 88.9mm 88.9mm 0.93" mm " 23.6mm Ø 0.74 " 19mm 2.18" Range Jumper -F Style -F Style 1.18" 30mm 1.18" 3.04" 77.2mm 89.7mm 2.40" 31mm 0.45" 11.4mm 0.85" 21.6mm 3.04" 2.40" 0.45" 0.85" 0.85" 21.6mm 0.86" 2.25" 57.2mm Ø 0.19" 4.83mm 2.25" Ø 0.19" Range Jumper -S Style -S Style DL105 DL205 DL305 DL405 Field I/O Software C-more HMIs Other HMI AC Drives s 4 20mA Option (VDC) Loop Power Range Jumper VDC Power ( ) (+) 1( ) 2(+) Power Supply (4 20 ma output only) 0 V L = 12VDC + (R L 0.020A) where V L = Minimum Loop Supply R L = Total Loop Resistance (Ohms) Total Loop Impedance (Ohms) Load (+) (Controller, Meter, etc.) ( ) Notes: Deadfront captive screw terminals ( F case) AWG solid or stranded Observe polarity Operating Range Operator Interface Panel 1000 Input to Controller Steppers/ Servos Controls Proximity Photo Limit Switches Pushbuttons/ Lights Process Relays/ Timers Comm. Variable Frequency Drive True RMS Transducer, even on VFDs or SCRs TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index 21 7

8 ACS150 Series Switches ACS150 Series current operated switches combine a current transformer, signal conditioner and limit alarm into a single package for use in monitoring or proof of operation applications. Offering an adjustable setpoint range of 1 to 150 amps and universal, solid-state outputs, the self-powered ACS150 can be tailored to provide accurate and dependable digital indication of over-current conditions across a broad range of applications. The ACS150 is available in fixed-core and split-core models. Applications Electronic Proof of Flow operated switch eliminates the need for multiple pipe or duct penetrations More reliable than electromechanical pressure or flow switches Conveyors Detect jams and overloads; useful when interlocking multiple conveyor sections Heating Circuits Detect ON/OFF status; faster response times than with temperature sensors Loss of Load Detective Detect belt or coupling breaks with fast response times Lighting Circuits Easier and faster than photocells Features Five-year warranty N.O. Universal s VAC/VDC Status LED provides visual indication of setpoint trip and contact action Self-powered operation cuts installation time and operating costs Field-adjustable trip points speed start-up and allow for tailored operation Choose either split-core or fixed-core enclosure style. Split-core packages allow easy installation on existing systems ; fixed-core enclosures offer more compact package for OEM or new installations Integral mounting feet offer secure mounting Agency Approvals UL, cul, CE approvals accepted worldwide ACS150 Operated Switches Part Number Description Pcs/Pkg Wt/lb ACS150-AE-F N.O. AC/DC adjustable current switch in fixed core enclosure ACS150-AE-S N.O. AC/DC adjustable current switch in split core enclosure Accessories DRA-2 DIN rail adapters, 1.69 x0.39 x0.75 (43x10x19 mm) ACS150 Series Specifications Power Supply None - Self-powered Isolated solid-state switch Rating N.O VAC or VDC Response Time 120 ms Off State Leakage < 10 µa Fixed-core: 1 to 150 A. Input Ranges Split-core: 1.75 to 150 A Hysteresis 5% of Setpoint Overload (1 second duration) 1,000 A Isolation Voltage UL listed to 1,270VAC. Tested to 5,000 VAC (1 minute max) Frequency Range 6 to 100 Hz Case UL 94V-0 flammability rated Environmental Temperature -58 to 149 F (-50 to 65 C) Humidity 0 to 95% RH, non-condensing Agency Listings UL listed 508, UL file E222847, CE approved Type ACS150 Maximum Input Ranges Range - Maximum Input Amps Adjustable Continuous 6 Sec max 1 Sec max Fixed Core A Split Core A Minimum Load Operating ACS150 Minimum Load/MTBF MTBF (Mean Time Between Failure) x 10^6 ** 4.33 hours ** 4.33 hours ** The AC/DC switch output has no specified minimum load required to operate the output. There is a maximum resistance of 5 ohms across the output when the switch is on

9 ACS150 Series Switches DL05/06 Dimensions (in/mm) 3.03 " 77.0mm Ø 0.19" 4.8mm 2.40" Ø 0.19 " 61.8mm Ø 0.74" 4.8mm 2.40 " 19mm 61.0mm 2.18 " 3.03" 76.9mm 3.50" 88.9mm 3.50 " 88.9mm 0.93" 23.6mm 0.93 " Setpoint 23.6mm Adjust LED 2.18" FAN ON Controller Ø 0.74 " 19mm DO DI 1.19 " 30.2mm 1.19" 30.2mm NOT REQUIRED! 2nd Conduit, Wire, DP Switch, Pressure 2.25 Tubing, " Pipe Fitter, etc. 57.2mm Perfect Match for 3.53 " 89.7mm 2.40 " 61mm 0.85 " 21.6mm 2.25" 0.85 " 21.6mm 57.2mm Ø 0.19 " 4.8mm -F Style Out In -F Style Automation -S -S Style Style Systems LED 3.04 " 77.2mm 3.04" 77.3mm 89.7mm 2.40" 61mm 0.85" 21.7mm 0.86" 21.7mm Trip Point Adjust Ø 0.19" 4.8mm DL105 DL205 DL305 DL405 Field I/O Software C-more HMIs Other HMI AC Drives s Typical of Models with LED R Setpoint SmartLED 1 2 Terminals are #6 screws. Use up to 14 AWG copper wire L I N E AMPS Startup Inrush Underload or Status Normal Operation TIME Belt or Coupling Breaks AMPS Startup Inrush Overload or Jam Normal Operation TIME Jam MOTOR OFF Steppers/ Servos Controls Proximity Photo Limit Switches Control Signal Input Pushbuttons/ Lights Process ACS Series Operated Switch Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index 21 9

10 ACS200 Series Switches ACS200 series current operated switches provide the same dependable status indication as the ACS150 series, but with added resolution. A choice of three jumper-selectable input ranges allows the ACS200 to be tailored to an application and provides more precision in setpoint adjustment. Self-powered, isolated solidstate relay outputs and multiple input ranges are standard features. Applications Electronic Proof of Flow operated switch eliminates the need for multiple pipe or duct penetrations, lowering installed costs Solid-state technology more reliable than electromechanical pressure or flow switches Conveyors Detect jams and overloads; useful when interlocking multiple conveyor sections Lighting, Heating Circuits Detect ON/OFF status, easier to install and less expensive than photocell or temperature sensor alternatives Features Five-year warranty N.O. Universal s 240 VAC or VDC Status LED provides visual indication of setpoint trip and contact action Self-powered operation cuts installation time and operating costs Field-adjustable trip points speed start-up and allow for tailored operation Choose fixed-core or split-core enclosure style. Split-core allows easy installation on existing systems; fixed-core offers more compact package for OEM or new installations Integral mounting feet provide secure mounting Agency Approvals UL, cul, CE approvals accepted worldwide ACS200 Operated Switches Part Number Description Pcs/Pkg Wt/lb ACS200-AA-F N.O. AC adjustable current switch, fixed core ACS200-AA-S N.O. AC adjustable current switch, split core ACS200-AD-F N.O. DC adjustable current switch, fixed core ACS200-AD-S N.O. DC adjustable current switch, split core Accessories DRA-2 DIN rail adapters, 1.69 x0.39 x0.75 (43x10x19 mm) ACS200 Series Specifications Power Supply None - Self-powered Isolated solid-state switch Rating N.O. AC: 240 VAC N.O. DC: 30 VDC Response Time ms Off State Leakage < 10 µa Jumper selectable: Fixed-core: 1 to 175 A. Input Ranges Split-core: 1.75 to 200 A Hysteresis low: 0.15A; mid: 0.3; high: 0.9A Overload (1 second duration) low: 600 A; mid: 800 A; high: 1,200 A Isolation Voltage UL listed to 1,270VAC. Tested to 5,000 VAC (1 minute max) Frequency Range 6 to 100 Hz Case UL 94V-0 flammability rated Environmental Temperature -58 to 149 F (-50 to 65 C) Humidity 0 to 95% RH, non-condensing Agency Listings UL listed 508, UL file E222847, CE approved Maximum Input Ranges Range Range - Jumper Fixed Core Range Maximum Input Amps Split Core 6 Sec max 1 Sec max NONE 1 to 6 A 1.75 to 6 A MID 6 to 40 A 6 to 40 A HIGH 40 to 175 A 40 to 200 A Switching Delay Delay LOW Range MID Range HIGH Range ON Delay 0.23 sec max 0.05 sec max 0.03 sec max OFF Delay 0.02 sec max 0.02 sec max 0.01 sec max Hysteresis 6% 4% 3% Part Number ACS200 Minimum Load/MTBF Min. Operating MTBF (Mean Time Between Failure) x 10^6 ACS200-AA-F 20 ma 4.29 hours ACS200-AA-S 20 ma 4.29 hours ACS200-AD-F 1 ma 4.39 hours ACS200-AD-S 1 ma 4.39 hours

11 ACS200 Series Switches DL05/06 Dimensions (in/mm) Ø 0.19 " 4.8mm 2.75 " 69.9mm 2.16 " 54.9mm 0.92 " 23.4mm 1.19 " 30.2mm 3.04 " 77.2mm 3.53 " 89.7mm Ø 0.19 " 4.8mm DL105 DL205 DL305 DL405 Field I/O Software 2.18 " Ø 0.55 " 14mm 2.40 " 61mm 0.85 " 21.6mm C-more HMIs Other HMI AC Drives Setpoint Input Range Jumper none low mid high 3.30 " 83.8mm Status LED Terminals are #6 screws Use up to 14 AWG copper wire L I N E AMPS FAN ON Controller 2.25 " Great 57.2mm with Relay Logic Control 0.85 " 21.6mm -F Style -S Style Startup Inrush DO Out DI In Underload or Status Normal Operation TIME Belt or Coupling Breaks AMPS Startup Inrush Input Overload or Jam Normal Operation TIME Jam MOTOR OFF s Steppers/ Servos Controls Proximity Photo Limit Switches Pushbuttons/ Lights Process ACS Series Operated Switch Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index 21 11

12 ACSX Series Switches The ACSX series high-performance current-operated switch has a fieldadjustable time delay feature that minimizes nuisance trips during start-up and operation. These switches are designed for motor status applications where setpoint accuracy and repeatability are critical and offer a linear setpoint characteristic and constant hysteresis. Applications Protection Serves as an electronic proof-of-operation; detects current draw changes in motors when they encounter problems such as pumps running dry or impending bearing failure Non-intrusive; less expensive to install than differential pressure flow sensors or thermal switches Much quicker response time than Class 10 overload relays High Inrush or Temporary Overload Adjustable start-up/delay timer allows 0-15 second delay to eliminate nuisance trips from high inrush or short overload conditions ACSX Operated Switches Part Number Description Pcs/Pkg Wt/lb ACSX200-AA-F N.O. AC adjustable current switch, fixed core ACSX200-AA-S N.O. AC adjustable current switch, split core ACSX200-AE-F N.O. AC/DC adjustable current switch, fixed core ACSX200-AE-S N.O. AC/DC adjustable current switch, split core Accessories DRA-2 DIN rail adapters, 1.69 x0.39 x0.75 (43x10x19 mm) Features Standard features include self-powering, jumper-selectable ranges and a choice of outputs and core styles Five-year warranty Adjustable start-up/delay timer is fieldadjustable from 0.2 to 15 seconds to eliminate nuisance alarms caused by start-up inrush or temporary overcurrent conditions. Choice of N.O. AC or AC/DC outputs: Contact ratings of 240 VAC or universal outputs of 240 VAC/VDC for use with most standard motor control systems. Improved ease of installation and use: - 1.0A rating eliminates need for time delay relay - Self-powered, split-core models simplify installation - Status LED provides visual indication of setpoint trip and contact action Industrial grade performance - constant hysteresis and linear setpoint response for greater accuracy Agency Approvals UL, cul Listed CE approval pending ACSX Series Specifications Power Supply None - Self-powered Isolated solid-state switch Rating N.O. AC: 240 VAC N.O. AC/DC: VAC/VDC Response Time Adjustable 0.2 to 15 seconds Off State Leakage < 10 µa Jumper Selectable: Fixed core: 1 to 175 A Input Ranges Split core: 2 to 200 A Hysteresis 5% constant 2 to 12 A Range: 600 A; Overload (1 second duration) 12 to 55 A Range: 800 A; 50 to 200 A Range: 1200 A Isolation Voltage UL listed to 1,270VAC. Tested to 5,000 VAC (1 minute max) Frequency Range 50 to 100 Hz Case UL 94V-0 flammability rated Environmental Temperature 5 to 122 F (-15 to 50 C) operating temperature Humidity 0 to 95% RH, non-condensing Agency Listings UL listed 508, UL file E222847, CE approval pending Type Maximum Input Ranges Range - Maximum Input Amps Adjustable Continuous 6 Sec max 1 Sec max Fixed Core A Split Core A Part Number ACSX200 Minimum Load/MTBF Minimum Load Operating MTBF (Mean Time Between Failure) x 10^ hours 4.33 hours 4.29 hours 4.29 hours ACSX200-AE-F ** ACSX200-AE-S ** ACSX200-AA-F 20 ma ACSX200-AA-S 20 ma ** The AC/DC switch output has no specified minimum load required to operate the output. There is a maximum resistance of 5 ohms across the output when the switch is on

13 Dimensions (in/mm) 0.125" 3.2mm 0.75" 19mm dia " 24.56mm 1.506" 38.3mm S 2.433" 61.8mm 89.7mm LED 1.5" 39mm 3.08" 78mm Time Delay ACSX Series Switches high Range Use up to 14 AWG copper wire 2.18" mid 1.93" 49mm L I N E AMPS 0.931" FAN ON 23.7mm 0.17" 4.5mm int. dia. DO Typical of Controller 2 Out 0.6" 15mm Startup Inrush t DI In Normal Operation TIME 1.18" 0.125" 3.2mm 0.72" 18.3mm Belt or Coupling Breaks 0.857" 21.7mm LED Match for Automation Systems AMPS Trip Point Adjust 3.04" Startup Inrush t 2.4" 61mm 2.25" 57.2mm 0.52" 13mm NOT REQUIRED! 2.40" 2nd Conduit, Wire, DP 0.52" Switch, 0.854" Pressure Tubing, Pipe Fitter, etc. 13mm 21.7mm 0.45" Perfect89.7mm 2.4" 0.85" 61mm 0.86" Normal Operation TIME 0.36" Ø 0.19" 9.1mm 0.19" 4.5mm dia. Typical of 2 Jam 1.18" 30mm -F Style 3.044" -S Style 77.3mm -S Style Input Time Delay Adjust 2.25" Range Jumper MOTOR OFF DL05/06 DL105 DL205 DL305 DL405 Field I/O Software C-more HMIs Other HMI AC Drives s Steppers/ Servos Controls Proximity Photo Limit Switches Pushbuttons/ Lights Process ACSX Series Operated Switch Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index 21 13