RN Thyristor Controllers
|
|
- Amelia Horn
- 6 years ago
- Views:
Transcription
1 Data Sheet RN Thyristor Controllers RN Thyristor Controllers Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive s, typically electric heating elements.they are not suitable for switching motors or for heater lamp applications. Trend RNFV RNFV RNF4V RNF4V RNF4V RNF4V Thyristors All Trend RN solid state thyristor relays have the following specification: Control input :0 to 0 Vdc, 0. ma at 0 Vdc Control supply : to Vdc or to 7 Vac; ma at Vdc or 7 Vac Current ratings :depend on ambient temperature, nominal, A ratings are at C ambient. Voltage ratings V :5 to 5 Vac 40 V :90 to 5 Vac Document Attached: Carlo Gavazzi RN F data sheet (/5/00) Description Housing pole Vac A thyristor RHN pole Vac A thyristor RHN pole 40 Vac A thyristor RHN pole 40 Vac A thyristor RHN pole 40 Vac A (5 A per pole) thyristor RHN pole 40 Vac A (5 A per pole) thyristor RHN Applications: wire phase to phase or phase to neutral NEUTRAL (resistive) Vac RNFV RNFV RNF4V RNF4V wire phase floating star (all s resistive). RNF4V RNF4V 4 wire phase with star point to neutral (all s resistive) NEUTRAL. RNF4V RNF4V RN Thyristor Controllers Data Sheet TA0097 Issue /C 5//0
2 RN Data Sheet Applications (continued) 4 wire phase closed delta. RNF4V RNF4V (all s resistive) 5 wire phase open delta 7.. RNF4V 4 RNF4V (all s resistive) wire phase star phases controlled (burst fire only) (all s resistive). 0. RNF4V RNF4V RNF4V 5 RNF4V 5 7 wire phase delta phases controlled (burst fire only) (all s resistive). 0. RNF4V RNF4V RNF4V 5 RNF4V 5 Trend Control Systems Ltd reserves the right to revise this publication from time to time and make changes to the content hereof without obligation to notify any person of such revisions or changes. Trend Control Systems Ltd P.O. Box 4 Horsham Sussex RH YF England Tel:44 (0)40 Fax:44 (0) RN Thyristor Controllers Data Sheet TA0097 Issue /C 5//0
3 Solid State Relays Analog Full Cycle Switching RN.F... AC solid state relay, - and poles Analog switching for resistive s (heating) 4-0 ma or 0-0 V controls Rated operational current and AAC rms Rated operational voltage up to 40 VAC LED-indication for normal operation and alarm status IP 0 protection DIN-rail mountable Product Description Ordering Key RN F 40 V The analog switching relay provides a number of full cycles, evenly distributed over a fixed period, depending of the control input. The input of 4-0 ma or 0-0 VDC respectively, corresponds to zero and full output within a period of. Hz (.07 0 Hz). This principle makes the transfer characteristics fully linear. The principle operates with zero switching, thus ensuring a reduced level of radiated and wire conducted noise. The - pole type has alarm LED indication by loss of master phase. The analogue Full Cycle Switching is not recommended for light control due to light-flickering. Solid State Relay Number of poles Switching type Rated operational voltage Control signal Rated operational current Selection, -Pole Rated Control Control Rated operational current operational voltage input supply A A 0 VAC 4-0 ma 7-0 VDC RN FI RN FI 0-0 VDC - VDC, 4 VAC RN FV RN FV VAC 4-0 ma 7-0 VDC RN FI RN FI 0-0 VDC - VDC, 4 VAC RN FV RN FV 40 VAC 4-0 ma 7-0 VDC RN F4I RN F4I 0-0 VDC - VDC, 4 VAC RN F4V RN F4V Selection, -Pole Rated Control Control Rated operational current operational voltage input supply A A 0 VAC 4-0 ma 7-0 VDC RN FI RN FI 0-0 VDC - VDC, 4 VAC RN FV RN FV VAC 4-0 ma 7-0 VDC RN FI RN FI 0-0 VDC - VDC, 4 VAC RN FV RN FV 40 VAC 4-0 ma 7-0 VDC RN F4I RN F4I 0-0 VDC - VDC, 4 VAC RN F4V RN F4V Specifications are subject to change without notice (.05.00)
4 RN F General Specifications Thermal Specifications RN.F... RN.F... RN.F4... Operational voltage range 5 to 40 VAC 5 to 5 VAC 90 to 5 VAC Non-rep. peak voltage 00 V p 00 V p 000 V p Varistor voltage 75 VAC 75 VAC 50 VAC Zero voltage turn-on < 0 V < 0 V < 0 V Operational frequency range 45 to 5 Hz 45 to 5 Hz 45 to 5 Hz Power factor at rated voltage Average output power 0 to 00% 0 to 00% 0 to 00% Output power resolution /4 of 00% /4 of 00% /4 of 00% Approvals UL, cul, CSA UL, cul, CSA UL, cul, CSA CE-marking Yes Yes Yes Norms fulfilled HD 49.S Low-voltage controlgear semiconductor contactors EN 0- Generic Immunity Standard. Residential, Commercial & Light Industry Environment EN 0- Generic Immunity Standard. Industrial Environment Input Specifications Current controlled input Control current range Allowable input current Reverse polarity protected Voltage drop Output Specifications RN.F..I ma ma Yes 0 0 ma Voltage controlled input Supply voltage range Supply current Control voltage range Control input current RN.F..V.. RN.F.. RN.F.. Rated operational current RNF.. C A C A C A C 0 A A RNF.. C A total sum A total C A total sum A total C A total sum A total C 0 A total sum A total sum Zero crossing detection Yes Yes Min. operational current (per pole) 0 ma 0 ma Rep. over current t= s (Tj init.=5 C) 55 A (rms) 5 A (rms) Non-rep. surge current t=0 ms (Tj init.=5 C) < A p < 00 A p Off-state leakage rated voltage and frequency (Tj.=5 C, max.) < ma < ma I t for fusing t= to 0 ms 0 A s 00 A s Critical dv/dt off-state 0 V/µs 0 V/µs - 7 VAC, - VDC 4 VAC/ VDC 0-0 V 0. 0 VDC RN.F.. RN.F.. Operational temperature -0 to 70 C (-4 to 5 F) -0 to 70 C (-4 to 5 F) Storage temperature -0 to 00 C (-4 to F) -0 to 00 C (-4 to F) Junction temperature < 5 C (57 F) < 5 C (57 F) R th junction to ambient (AC ). K/W.7 K/W Specifications are subject to change without notice (.05.00)
5 RN F Housing Specifications Mounting DIN-rail 5 mm Weight with RHN 470 g Weight with RHN 70 g Housing material Glass reinforced noryl SEGFN LED window material PC Lexan 4R Base plate Aluminium, nickel plated Potting compound Polyurethane, Casco Nobel Terminals Screw with captive wire clamp Control terminals nominal 4 mm or x.5 mm AWG or x AWG 4 Min. 0.5 mm, AWG 0 Mounting torque max. 0. Nm Power terminals nominal 0 mm or x mm AWG or x AWG 0 Min. mm, AWG Mounting torque max..0 Nm Heatsink compound used Dow Corning 40 Insulation Rated impulse withstand voltage Input to output 4000 V imp Rated impulse withstand voltage Output to heatsink 4000 V imp Environment Specifications Humidity max. Dimensions 95%, no condensation Dimensions with RHN ( A) (H x W x D) 0 x 45 x 0 mm Dimensions with RHN ( A) (H x W x D) 0 x 90 x 0 mm Dimensions , , RHN,7 Note: all dimensions in mm RHN 7 Note: all dimensions in mm Wiring Diagrams Current Control 4-0 ma Voltage Control 0-0 VDC Current Control 4-0 ma Voltage Control 0-0 VDC L A A L A A L L A A L L A A T T A A 4 T T T T A A 4 Single-pole relay Control Supply Double-pole relay Control Supply Specifications are subject to change without notice (.05.00)
6 RN F Terminal Layout -pole RN.. -pole RN.. Functional Diagrams -pole current controlled input A L A A L L A Master VAC/VDC / VDC(A, A 4 only used for voltage control) A A 4 L A control signal A C/V T Slave (-pole version) L A A 4 T A 4 T T A Shown with RHN T Applications Single and double pole relay application Line-Neutral Double pole relay in -phase application Star and delta application (Economy Switching only) L L L L L N 4 Specifications are subject to change without notice (.05.00)
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current
More informationSolid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P
Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P AC semiconductor contactor Multi-function - 5 selectable modes of operation: Phase Angle, Distributed Full Cycle and Burst Control
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationSolid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA 24.... 06/RA 44.... 08/RA 48.... 12 AC Solid State Relay Zero switching Direct copper bonding technology Rated operational current:, 2,
More informationMotor Controllers Soft Starting/Soft Stopping Types RSC-AAM60/RSO...
otor Controllers Soft Starting/Soft Stopping Types RSC-60/RSO... Control and output modules for analogue control of 3-phase induction motors or heaters Rated operational current: 3 x, 25, 50, 90, 1 Crms
More informationIndustrial, 2-Pole ZS Type RA2A
Solid State Relays Industrial, 2-Pole ZS Type 2-Pole AC Solid State Relay Zero switching For resistive and inductive AC loads Direct copper bonding (DCB) technology LED indication Rated operational current:
More informationMotor Controllers 3-Phase Analog Power Controller Types RSC-AAM60/RSO...
otor Controllers 3-Phase nalog Controller Types RSC-60/RSO... Control and output modules for analogue control of 3-phase induction motors or heaters Rated operational current: 3 x, 25, 50, 90, 1 Crms Rated
More informationSolid State Relay. Zero Switching Types RGC Solid State Contactor 'U' Connection. Product Description RGC 1 A 60 A 40 K G U _.
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 85AAC
More informationSOLID STATE RELAY RATINGS
Solid State Relays SOLID STATE RELAY RATINGS PART NUMBER HPR48A25 HPR48A50 HPR48A75 3PSS60A75 HPR48D25 HPR48D50 HPR48D75 Rated operational current AC51 @ Ta=25 C 25 AMPS rms 50 AMPS rms 75 AMPS rms 75
More informationCI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1
MAKING MODERN LIVING POSSIBLE Technical brochure CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1 www.danfoss.com Contents Page Features... 3 Description... 3 Selection... 3 Technical data...
More information08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
More informationNEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks
More information77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
More informationSolid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long
More informationSemiconductor contactors, Solid-state relays
Semiconductor contactors, Solid-state relays Content Benefits and advantages... 338 Approvals and marks... 338 Semiconductor contactors... 339 Ordering details... 339 R100.xx, single-phase... 339 R300.xx,
More informationSolid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
More informationCI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1
Technical Document CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1 Features Phase angle or burst firing control mode Current loop control, 4 20 ma, 20 4 ma, 0 20 ma and 20 0 ma Voltage control,
More informationRated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
77 Modular Solid State Relay 5 A 77 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random
More information3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching
Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL
More information1-Phase Integrated Heatsink Zero Cross or Instant On Switching
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage:
More informationcelduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac
Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use Single-Phase Relay: Phase angle ler Transfer characterisic :Angle open loop Operating voltage
More informationSolid State Relays Industrial, 1Phase Peak Switching Type RM1C
Solid State Relays Industrial, 1Phase Peak Switching Type Ideal for switching of transformers and other highly inductive loads Direct copper bonding (DCB) technology Thyristor power units LED indication
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01 DPC01 PPC01 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More information08/07/2015
17.5 mm - 1 Relay 8A MUR1 Part number 88827105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external load connection
More informationADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Types DPB01, PPB01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Types, TRMS 3-phase over and under voltage, phase sequence and phase loss monitoring relays Detect when all 3 phases are present and have the
More informationSolid State Relay, 1-phase
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relay, 1-phase Short-Circuit Proof, heat sink integrated Main Characteristics: Standards / Approvals: CE C-Ti I Zero-point switching Short-circuit
More informationSolid State Relays 1-Phase, Soft Start Switching Types RGS1P..K..
Solid State Relays 1-Phase, Soft Start Switching Types RGS1P..K.. 1-pole AC solid state relays Soft start switching for short wave infrared heaters Rated operational voltage: up to 660 VAC Rated operational
More informationcelduc SILD Output : VAC 32A(*) Input : 3-32VDC - I<10mA Diagnostic : 30VDC - 100mA r e l a i s celpac P roud to serve you
AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting. Ready to use Single-Phase Relay: " Install it & Forget it!" Zero cross model : 7-28AC 5A back to back thyristors
More informationcelduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you
Power Solid State Relay With Analog Control, pitch.5mm compact size and DIN rail mounting. Ready to use SinglePhase Relay: Phase angle controller Transfer characterisic :Angle open loop Operating voltage
More informationSolid State Relays 1-Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K..
Solid State Relays 1Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K.. 1pole AC solid state contactors Soft start switching for short wave infrared heaters Rated operational voltage:
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71 DPC71 PPC71 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More informationSolid State Relays Zero Switching Types Solid State Contactor
Solid State Relays Zero Switching Types Solid State Contactor Product Description This new range of solid state contactors presents an unique opportunity to maximize efficiency in panel space and is an
More informationSELECTION GUIDE. BULLETIN 156 Solid-State Contactors
SELECTION GUIDE BULLETIN 156 Product Overview/Product Selection Bulletin 156 The Bulletin 156 are ideal replacements for electro-mechanical contactors where fast and demanding switching of loads such
More information3.6. Control Relays and Timers D A M D 2. Contents. Product Overview. Catalog Number Selection. Solid-State Relays
.6 Control Relays and Timers Product Overview Catalog Number Selection D9, D96 and D99 Series Description D9 = Hockey puck D96 = Compact D99 = DIN rail Contents D 9 2 5 A M D 2 Output Voltage 1 = 2 60
More informationcelduc SIL Phase angle controller Output : VAC 32A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you
Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use SinglePhase Relay: Phase angle controller Transfer characterisic :Angle open loop Operating voltage
More informationcelduc SILD r e l a i s celpac PATENTED! AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting.
AC Semiconductor Contactor pitch,5mm with Diagnostic compact size and DIN rail mounting. Ready to use SinglePhase Relay: " Install it & Forget it!" Zero cross model : 55VAC 5A back to back thyristors on
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01 Product Description 3-phase or 3-phase+neutral line voltage monitoring relay for phase sequence, phase loss, asymmetry, over and
More informationSolid-state Timer H3DS
Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More informationSemiconductor contactors, Solid-state relays
Semiconductor contactors, Solid-state relays Content Benefits and advantages, approvals... 224 R100.xx semiconductor contactors, single-phase Ordering details... 225 Technical data... 228 Dimensional drawings...
More information48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
More informationSolid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 40A types LED indication Clip-on IP 20 protection
More informationSolid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
More informationControl Input. Status Ouputs. 0 to 24VDC 1A AC/DC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM
SVTA4690 DIGITAL THREE PHASE ANGLE CONTROLLER Farnell order relais code code 399-6335 SVTA4690! Allows to set the voltage applied to different sort of loads :! Resistive (Bulbs, UV and IR lamps, ovens,
More informationSubject to changes 11/2003 Page 1/7
Main Characteristics: Zero switching. LED display. Various connection systems. Plug-in control terminal. Degree of protection IP 2. Double-insulated design. General Data: Standards / Approvals DIN EN 697--3
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationAQ-R SOLID STATE RELAY FEATURES
(A 5A A type) SOLID STATE RELAY FEATURES. Two types of terminal shape: Plug-in terminal and Screw terminal ( A A is screw terminal types only). Flat type of SSR possible by aluminium printed circuit board.
More informationSolid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor U Connection Product width ranging from 17.5mm up to 70mm Rated operational voltage: up
More informationStatus Ouputs. Control Input. 0 to 24VDC 1A AC/DC. 4-20mADC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM
Page 1/6 GB DIGITAL THREE PHASE ANGLE CONTROLLER Allows to set the voltage applied to different sort of loads with 3 wires, 4 wires or inside the delta wiring: Resistive (Bulbs, UV and IR lamps, ovens,
More informationSeries 7 Power Controllers
Series 7 DIN Rail Mount Power Devices Series 7 Power Devices put 12 to 80 Amps in a DIN rail mount package that provides precision machine control for heater bands, cartridge heaters, and other resistive
More informationRated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
Modular 5 A 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random switch-on versions available
More information38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationRP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
1phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
More informationSolid-state Contactor Specifications
Technical Data Solid-state Contactor Specifications Bulletin Number 156 Topic Page Topic Page Catalog Number Explanation 2 Dual- and Three-phase Devices 25 Single-phase Devices 3 Product Selection 25 Product
More informationZelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
More informationATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW
Characteristics soft starter for asynchronous motor - ATS01-25 A - 110..480V - 2.2..11 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW
Characteristics soft starter for asynchronous motor - ATS01-12 A - 110..480V - 1.5..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application
More informationCatalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
More informationRP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
More informationDATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection
DATASHEET - ETR4-70-A Delivery program Timing relay, 2W, 0.05s-100h, multi-function, 24-240VAC/DC, potentiometer connection Part no. ETR4-70-A Catalog No. 031888 Eaton Catalog No. XTTR6A100H70B EL-Nummer
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More informationATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW
Characteristics soft starter for asynchronous motor - ATS01-22 A - 200..240 V - 4..5.5 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationSolid State Relay. Zero Switching Types RGC Solid State Contactor 'E' Connection. Product Description RGC 1 A 60 A 30 K K E _.
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
More information05/09/2012
17.5 mm EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer ON LED) Option
More informationCI-tronic Soft start motor controller
Data sheet CI-tronic Soft start motor controller MCI 3, MCI 15, MCI, MCI 30 I-O, MCI 40-3D I-O and MCI 50-3 I-O The MCI soft starters are designed for soft starting and stopping of 3 phase AC motors, thus
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More informationSolid-State Relays Zero-point switching, without heatsink
PM Prozeß- und Maschinen-utomation GmbH Solid-State Relays Zero-point switching, without heatsink Main Characteristics: Space-saving, width of only 22.5 mm LED display Various technologies Plug-in control
More informationGTT 25A - 40A - 60A - 90A - 120A POWER SOLID STATE RELAYS WITH ANALOG CONTROL
GTT 25A - 40A - 60A - 90A - 120A POWER SOLID STATE RELAYS WITH ANALOG CONTROL Main applications Plastics extrusion lines and injection moulding machines Polymerization plant for synthetic fibre production
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More informationIGS IGS-M-EL-22(1) Contactors APPROVED. Iranian Gas Standards
APPROVED IGS Iranian Gas Standards Contactors. Fax:(9821)-8131-5679 --. /012 34-52673892 :;395- 8? /@A7 B;CD /E FGH 34-52673892I2
More informationPole "Common" Jumper 10 postion jumper - Red
SIMM Series Input Modules * 6. mm wide and 6 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP0 s 06 06 06
More informationElectronic timer CT-SDE Star-delta change-over with 1 n/c + 1 n/o contact
Data sheet Electronic timer CT-SDE Star-delta change-over with n/c + n/o contact The CT-SDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More information02/11/2015
Emergency stop and safety guard monitoring 2 channels KNE3-YS Part number 85102436 "Emergency stop" & "Safety gates monitoring" functions Single and 2-channel operation Security with redundancy and feedback
More information02/11/2015
17.5 mm - 1 Relay 5A EMER8 Part number 88829198 Multifunction or mono-function Multi-range (7 ranges) Multi-voltage or single voltage Screw terminals LED status indicator (1 voltage present LED, 1 timer
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Product datasheet Characteristics ATS01N206QN soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Complementary Assembly style Function available Supply voltage limits Main Range of
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More informationElectronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
More information38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
More informationSolid State Relays 3-Phase with Integrated Heatsink Types 2 & 3 Pole
Solid State Relays 3Phase with Integrated Heatsink Types 2 & 3 Pole 2pole & 3pole AC switching solid state contactors Product width up to 2.84" (72 mm) Rated operational voltage: up to VAC Rated operational
More informationEC centrifugal fan. backward curved, single inlet
RG56-AG7- ebm-papst Mulfingen GmbH & Co. KG Bachmühle 746 Mulfingen Phone: +49 798 - Fax: +49 798 - www.ebmpapst.com info@de.ebmpapst.com Nominal data Type Motor RG56-AG7- MG-FF Phase ~ Nominal voltage
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationEnergy Management Energy Meter Type EM110
Energy Management Energy Meter Type EM110 Single phase energy meter Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Electro-mechanical display Energy readout on display: 6+1 digit
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationSelect G3PA SSRs and G32A Cartridges to be Discontinued; Replace with G3PA-X or G3PJ Relays, G32A-A-X Cartridges
NO: RL-159 PRODUCT: G3PA SSRs, G32A Cartridges DATE: January 2017 TYPE: Partial Discontinuation Notice Select G3PA SSRs and G32A Cartridges to be Discontinued; Replace with G3PA-X or G3PJ Relays, G32A-A-X
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationRE17LLBM asymmetrical flashing relay s V AC - solid state output
Characteristics asymmetrical flashing relay - 0.1..1 s - 24..240 V AC - solid state output Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 75.00 USD Main Range
More information22/10/2012
22.5 mm DIN rail mounting TUR1 Part number 88865105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator Option of connecting an external power supply
More informationCircuit Breakers. Excerpt from Master Catalogue. Circuit Breakers. Specifically For You
Circuit Breakers Excerpt from Master Catalogue Circuit Breakers Specifically For You Hydraulic-magnetic technology ensures reduced nuisance tripping with temperature variance Always holds 00% rated current
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+, Multifunction Types DPC01 Product Description 3-phase or 3-phase+neutral line voltage monitoring relay for phase sequence, phase loss, asymmetry, over and
More informationResilient 3000 EP3000AC48IN Rectifier 3000W Output at 48 58Vdc
Resilient 3000 EP3000AC48IN Rectifier 3000W Output at 48 58Vdc Product Description The Resilient 3000 is a high Efficiency, single phase, general purpose and ruggedized fan cooled rectifier for stand alone
More informationEnergy Management Energy Meter Type EM110
Energy Management Energy Meter Type EM110 Single phase energy meter Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Electro-mechanical display Energy readout on display: 6+1 digit
More informationModular timers A
Modular timers 1-6 - 8-16 A Building automation Elevators and lifts 80 SЕRIES Automation for blinds, grilles and shutters oists and cranes Panels for electrical distribution Door and gate openers FINDER
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays rue RMS 3-Phase, 3-Phase+, Multifunction ypes DPC01, PPC01 DPC01 Product Description 3-phase or 3-phase+neutral line voltage monitoring relay for phase sequence, phase loss, asymmetry,
More information48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
More information