RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
|
|
- Cordelia Banks
- 6 years ago
- Views:
Transcription
1 phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms Surface mount technology Flexible encapsulation for extended life Control voltage: 3 to 3 VDC / 6 to 3 VAC Optoisolation: > 4000 VACrms Blocking voltage: Up to 000 Vp Nonrepetitive surge current: Up to 50 Ap Description The RP is an SSR series for socket or PCBmounting, providing an ideal interface between logic controls and AC loads. The RP is designed for resistive and inductive loads up to 480VACrms. Internally this new series enjoys an improved technical design with the introduction of stressfree flexible encapsulation and automated assembly of components. The Solid State technology used can withstand peak voltages of 000V, making the RP series suitable to drive AC loads such as valve solenoids and small induction motors. Applications These relays can be used to switch heaters, motors, lights, valves or solenoids. Main functions Zero cross or Instant on AC switching Ratings up to 480 VACrms, 5.5 AACrms 33 VDC or 63 VAC control voltage
2 References Order code RP Enter the code entering the corresponding option instead of Code Option Description Notes R Solid State Relay (PCB) P Number of poles A Switching mode: zero switching B Switching mode: instanton switching 3 Rated operational voltage: 30 VACrms 40 Rated operational voltage: 400 VACrms 48 Rated operational voltage: 480 VACrms 4 to 3 VDC for RPA48.. D Control voltage: 3 to 3 VDC 4 to 3 VDC for RPB40.. and RPB48.. A Control voltage: 6 to 3 VAC Only available for 30V, 5.5 A 3 Rated operational current: 3 AACrms 5 Rated operational current: 5 AACrms 6 Rated operational current: 5.5 AACrms Mx M = Mounting on DIN EN adaptor RPM Max. 50V M = Mounting on DIN EN adaptor RPM Max. 600V Selection guide Rated operational voltage Blocking voltage 30 VACrms 650 Vp 400 VACrms 850 Vp Control voltage 3 to 3 VDC 6 to 3 VAC 3 to 3 VDC 4 to 3 VDC 480 VACrms 000 Vp 4 to 3 VDC Rated operational current 3 AACrms 5 AACrms 5.5 AACrms RPA3D3 RPA3D5 RPA3D6 RPB3D3 RPB3D5 RPB3D6 RPA3A6 RPA40D3 RPA40D5 RPA40D6 RPB40D3 RPB40D5 RPB40D6 RPA48D3 RPB48D3 RPA48D5 RPB48D5 RPA48D6 RPB48D6 Selection Guide (mounted on DIN EN adaptor) Rated operational voltage Blocking voltage 30 VACrms 650 Vp Control voltage 5 to 34 VDC 6 to 3 VAC Rated operational current 3 AACrms 5 AACrms 5.5 AACrms RPA3D3M RPA3D5M RPA3D6M RPB3D3M RPB3D5M RPB3D6M RPA3A6M* 480 VACrms 000 Vp 6 to 34 VDC RPA48D5M * Version RPA3A6M does not include an LED on the DIN adaptor.
3 CARLO GAVAZZI compatible components Purpose Component name/code Notes DIN adaptors RPM* RPMV* RPMP RPMPD* RPM DIN adaptor 50V with LED DIN adaptor 50V with LED + varistor DIN adaptor 50V with pins for removal of RP DIN adaptor 50V with pins for removal of RP + LED DIN adaptor 600V with LED *not suitable for use with RPA3A6 Further reading Information Where to find it 3
4 Features General Material PBT, RAL7035 Potting compound Flameretardant flexible silicone rubber Weight Approx. 0 g Isolation: input to output 4 kvacrms Insulation resistance 0 0 Insulation capacitance 8 pf Dimensions 4
5 Performance Mains supply Operational voltage range RPA RPB Operational frequency range RP.3 RP.40 RP VACrms 65 VACrms VACrms 440 VACrms Hz Blocking voltage 650 Vp 850 Vp 000 Vp Zero voltage turnon < 0 V VACrms 530 VACrms Outputs RP...3 RP...5 RP...6 Rated operational current AC T a = 5 C AC T a = 5 C 3 A A 5 A 3 A 5.5 A 5 A Min. operational load current 0 ma Power factor > 0.5 Rep. overload current t= s 0 AACrms AACrms 6 AACrms Nonrep. surge current t=0 ms 65 Ap 80 Ap 50 Ap Offstate leakage current < ma I t for fusing t=0 ms 0 A s 50 A s 340 A s Critical dv/dt off state min. 50 V/μs 500 V/μs Onstate voltage rated current <. Vrms Inputs Control voltage RP.3.. RPA40.. RPB40.. RP.48.. Pickup voltage RP.3.. RPA40.. RPB40.. RP.48.. RP..D RP..D..Mx RPA3A6 33 VDC 43 VDC.8 VDC 3.8 VDC 534 VDC 634 VDC 4.8 VDC 5.8 VDC 6 3 VAC 0 VAC Dropout voltage. VDC 5 VAC Max. input curent RPA... RPB... 0 madc 5 madc Max. reverse voltage 3 VDC 34 VDC Response time pickup RPA... RPB... Response time dropout RPA... RPB... < 0 ms < 60 μs ( VDC/ 50 Hz) < 30 μs (5 VDC/ 50 Hz) < 0 ms < 0 ms 3 maac < 0 ms < 0 ms 5
6 Derating curve Load current (AACrms) D6 D5 D Surrounding temp. ( C) Derating curve is used for finding max. load current at an elevated ambient temperature. The 3 lines in the graph represent the 3 nominal current ratings of the RP series (RP...D3/D5/D6). When used at full load current, the relays must be placed vertically. If more than one relay is mounted, please allow a minimum distance of 0 mm in between for sufficient air cooling. Increased Current Options I peak I nom T amb = 5 o C t I peak (Amps) D5 : t (minutes) D6 : t (minutes Note: even though the D3 can withstand a slight increase in current for a limited time, it is not recommended for this purpose. Thermal data Operating temperature Storage temperature 0 to +70 C (4 to +58 F) 40 to +00 C (40 to + F) 6
7 Compatibility and conformity Standards compliance LVD: EN EMCD: EN 60006, EN UL508 C. No. 43 VDE 0700, VDE 0805 (excluding RPA3A6) Approvals Electromagnetic compatibility (EMC) immunity EN/IEC Electrostatic discharge (ESD) 8 kv air discharge, 4 kv contact (PC) EN/IEC V/m, from 80 MHz to GHz (PC) Radiated radio frequency 0 V/m, from.4 to GHz (PC) 0 V/m, from to.7 GHz (PC) EN/IEC Electrical fast transient (burst) Output: kv, 5 khz (PC) Input: kv, 5 khz (PC) EN/IEC Conducted radio frequency 0V/m, from 0.5 to 80 MHz (PC) EN/IEC Output, line to line: kv (PC) Electrical surge Output, line to earth: kv (PC) Input, line to line: 500 V (PC) Input, line to earth: 500 V (PC) Voltage dips Voltage Interruptions EN/IEC % for 0.5, cycle (PC) 40% for 0 cycles (PC) 70% for 5 cycles (PC) EN/IEC % for 5000ms (PC) Electromagnetic compatibility (EMC) emissions Radio interference field emission (radiated) Class A: from 30 to 000 EN/IEC 550 MHz Radio interference voltage emissions (conducted) From 0.5 to 30 MHz EN/IEC 550 Class A (industrial) with filter capacitor across the Mains supply EN/IEC Class A (no filtering needed) Note: Performance Criteria (PC): no degradation of performance or loss of function is allowed when the product is operated as intended. Performance Criteria (PC): during the test, degradation of performance or partial loss of function is allowed. However when the test is complete the product should return operating as intended by itself. Performance Criteria 3 (PC3): temporary loss of function is allowed, provided the function can be restored by manual operation of the controls. Control input lines must be installed together to maintain products' susceptability to Radio Frequency interference. A suppression device, such as a varistor, needs to be connected across the output terminals L, T for immunity against higher voltage levels. A suppression device, such as a transil, needs to be connected across the control terminals A, A for immunity against higher voltage levels. 7
8 RP... Functional diagram (+) 3 Control input () 4 REGULATION ZC IO * ZC Zero Crossing IO Instant On RP..Mx Functional diagram RP..Mx RP... (+) 3 Control input () 4 (+) 3 Control input () 4 3 (+) 4 () REGULATION ZC IO ZC Zero Crossing IO Instant On * * The varistor is not included in the solid state relay. Connecting a varistor across terminals helps protect the solid state relay against damages by overvoltage Connection specifications Terminals Terminals soldering temperature Copper alloy, tinplated max. 300 C for 5 seconds COPYRIGHT 06 Content subject to change. Download the PDF: 8
RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
1phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
More informationSolid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long
More informationSolid State Relay. Zero Switching Types RGC Solid State Contactor 'U' Connection. Product Description RGC 1 A 60 A 40 K G U _.
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 85AAC
More informationIndustrial, 2-Pole ZS Type RA2A
Solid State Relays Industrial, 2-Pole ZS Type 2-Pole AC Solid State Relay Zero switching For resistive and inductive AC loads Direct copper bonding (DCB) technology LED indication Rated operational current:
More information2-pole solid state relays
2-pole solid state relays Description The series consists of 2-pole solid state relays contained in one housing with the possibility to control each pole independently (D2.. models) or both poles together
More information1-Phase Integrated Heatsink Zero Cross or Instant On Switching
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage:
More informationSolid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
More informationSolid State Relays Zero Switching Types Solid State Contactor
Solid State Relays Zero Switching Types Solid State Contactor Product Description This new range of solid state contactors presents an unique opportunity to maximize efficiency in panel space and is an
More information2-pole solid state relays
2-pole solid state relays Description The series consists of 2-pole solid state relays contained in one housing with the possibility to control each pole independently (D2.. models) or both poles together
More informationSolid State Relays 1-Phase, Soft Start Switching Types RGS1P..K..
Solid State Relays 1-Phase, Soft Start Switching Types RGS1P..K.. 1-pole AC solid state relays Soft start switching for short wave infrared heaters Rated operational voltage: up to 660 VAC Rated operational
More informationSolid State Relays 1-Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K..
Solid State Relays 1Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K.. 1pole AC solid state contactors Soft start switching for short wave infrared heaters Rated operational voltage:
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationSolid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA 24.... 06/RA 44.... 08/RA 48.... 12 AC Solid State Relay Zero switching Direct copper bonding technology Rated operational current:, 2,
More informationSolid-state Contactor Specifications
Technical Data Solid-state Contactor Specifications Bulletin Number 156 Topic Page Topic Page Catalog Number Explanation 2 Dual- and Three-phase Devices 25 Single-phase Devices 3 Product Selection 25 Product
More informationSolid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P
Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P AC semiconductor contactor Multi-function - 5 selectable modes of operation: Phase Angle, Distributed Full Cycle and Burst Control
More informationSolid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor U Connection Product width ranging from 17.5mm up to 70mm Rated operational voltage: up
More informationIntroduction EMC. Filter parameters. Definition of EMC / EMI. X-Capacitor. Sources of EMI. Coupling mechanism. Y-Capacitor.
Introduction to EMC Schurter has over 75 years experience in the electronics and electrical industries, developing and manufacturing components that ensure a clean and safe supply of power. Schurter provides
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationSolid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
More informationSolid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current
More informationFeatures. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
More informationFeatures. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter
Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationSolid State Relays 3-Phase with Integrated Heatsink Types 2 & 3 Pole
Solid State Relays 3Phase with Integrated Heatsink Types 2 & 3 Pole 2pole & 3pole AC switching solid state contactors Product width up to 2.84" (72 mm) Rated operational voltage: up to VAC Rated operational
More informationTMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
More informationSolid State Relay. Zero Switching Types RGC Solid State Contactor 'E' Connection. Product Description RGC 1 A 60 A 30 K K E _.
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More informationFeatures. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter
Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationFeatures. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter
Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationSolid-state Contactor Specifications
Technical Data Solid-state Contactor Specifications Bulletin Number 156 Topic Page Topic Page Catalog Number Explanation 2 Specifications Dual- and Three-phase Devices 25 Specifications Single-phase Devices
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationSOLID STATE RELAY RATINGS
Solid State Relays SOLID STATE RELAY RATINGS PART NUMBER HPR48A25 HPR48A50 HPR48A75 3PSS60A75 HPR48D25 HPR48D50 HPR48D75 Rated operational current AC51 @ Ta=25 C 25 AMPS rms 50 AMPS rms 75 AMPS rms 75
More informationDSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More informationFeatures. Regulated Converter RAC Watt Single Output. AC/DC Converter
Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationFeatures. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationSolid State Relays 1-Phase with Integrated Heatsink Proportional Switching Controllers Types RGC1P..AA.., RGC1P..V..
Solid State Relays 1-Phase with Integrated Heatsink Proportional Switching Controllers Types RGC1P..AA.., RGC1P..V.. 1-pole analog switching AC solid state contactors Selectable mode of operation: - Phase
More informationCB Scheme UL508 UL ATEX II3G
Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationElectronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact The CT-EBE is an electronic time relay with the function flasher starting with OFF. It is from the CT-E range. The CT-E
More informationEfficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
More informationPCB MOUNT SOLID STATE RELAY ESR2 SERIES
PCB MOUNT SOLID STATE RELAY ESR2 SERIES E155181(R) FEATURES PCB Mount; Single in Line Package. Optically Isolated. Input LED Indicator. High dv/dt and High Blocking Voltage. Low Input Power Consumption,
More informationPackaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More information2PSS60A40 Solid State Relays 3-Phase with Integrated Heatsink
Soli State Relays -Phase with Integrate Heatsink -pole AC switching soli state contactors Prouct with.84" (7 mm) Rate operational voltage: 600 VAC Rate operational current: up to 40 AAC Control voltages:
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationElectronic timer CT-SDE Star-delta change-over with 1 n/c + 1 n/o contact
Data sheet Electronic timer CT-SDE Star-delta change-over with n/c + n/o contact The CT-SDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
More informationThree-phase monitoring relays CM-PFE and CM-PFE.2
Data sheet Three-phase monitoring relays CM-PFE and CM-PFE.2 The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251
More informationOutput Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
More informationElectronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
More informationTE90 90W Single Output External Power Test & Measurement/Industrial Series
Features Meets U.S. DoE Efficiency Level VI and EU CoC Tier 2 Requirements No load input power Average Efficiency Up to 90W of AC-DC Power Universal Input 90-264Vac Input Range IP22 Rated Enclosure Meets
More informationProduct Specification sheet
INPUT MINIMUM RATED MAXIMUM Input Voltage 90V AC 100 240V AC 264V AC Input Frequency 47 Hz 50 / 60 Hz 63 Hz Input Current * 350mA Inrush Current **
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationFeatures. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationTE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range IP22 Rated Enclosure Meets Heavy Industrial Levels
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationOrdercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
More informationATV12H018F1 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application
More informationDC/DC Converter VRA_YMD-6WR3 & VRB_YMD-6WR3 Series
6W isolated - converter in YMD package Wide input voltage and regulated dual/single output CB Patent Protection RoHS FEATURES Wide 2:1 input voltage range High efficiency up to 88% No-load power consumption
More informationNotes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More informationParameter Condition Min. Typ. Max. Internal Input Filter. refer to line derating graph on PA-4 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input 85-35VAC 3W PCB mount package
More informationHigh power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
More information9 Specifications. Specifications NOMINAL CHARACTERISTICS
9 Specifications Specifications NOMINAL CHARACTERISTICS WARRANTED CHARACTERISTICS Nominal characteristics describe parameters and attributes that are guaranteed by design, but do not have associated tolerances.
More informationPS1201 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 12 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
More informationFED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More informationFeatures. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, for DI-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.5%
More informationCP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
More information08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
More informationTE W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 120W of AC-DC Power Universal Input 90-264Vac Input Range IPX-2 Rated Enclosure for protection against liquid
More information500 ma DC-DC Step Down Converter P78G-Series
500 ma DC-DC Step Down Converter -Series Pin compatible to linear 78xx regulator (TO-220) Not isolated Efficiency up to 95 % Input voltage range up to 6 V Positive or negative output voltage possible Operating
More informationATV12HU40M3 variable speed drive ATV12-4kW - 5hp V - 3ph - with heat sink
Characteristics variable speed drive ATV12-4kW - 5hp - 200..240V - 3ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
More informationSubject to changes 11/2003 Page 1/7
Main Characteristics: Zero switching. LED display. Various connection systems. Plug-in control terminal. Degree of protection IP 2. Double-insulated design. General Data: Standards / Approvals DIN EN 697--3
More informationControl Input. Status Ouputs. 0 to 24VDC 1A AC/DC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM
SVTA4690 DIGITAL THREE PHASE ANGLE CONTROLLER Farnell order relais code code 399-6335 SVTA4690! Allows to set the voltage applied to different sort of loads :! Resistive (Bulbs, UV and IR lamps, ovens,
More informationFeatures. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368
More informationTE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI and EU CoC Tier 2 Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range Meets Heavy Industrial Levels
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More informationNEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks
More informationHigh precision measurement system for current and voltage IHC-A/B-RM01/03
Measurement Offset-free and low-noise 16 bit data acquisition system ISA-ASIC Internal sample rate 3,500 Hz Communication Standard RS232- or RS485 interface Advantages Direct measurement on the bus bar
More informationThree-phase monitoring relay CM-PVE
Data sheet Three-phase monitoring relay CM-PVE The three-phase monitoring relay CM-PVE monitors the phase parameter phase failure as well as over- and undervoltage in three-phase mains. 2CDC 251 006 S0012
More informationREK 510 Current injection device for earth-fault protection of a synchronous machine rotor. User s Manual
REK 50 protection of a synchronous machine User s Manual REK 50 X 0 9 8 7 6 5 4 0 V 00 V 0 V 5 6 7 Ordering No: REK 50-AA Uau = 00/0 Vac Un = 48 V Serial No: fn = 50/60 Hz Uec = ma 600 Vdc MRS 75587-MUM
More information77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
More informationSeries AM50E-NZ 50 Watt DC-DC Converter
FEATURES: Wide Input range 2:1 Input to Output Isolation of 1500 High Efficiency up to 93% Input Over Voltage and Under Voltage Lockout Remote On/Off Control Output OVP, OCP & SCP Trim Adjustment Operating
More information