200W DIN Rail Programmable Output Voltage Power Supply
|
|
|
- Marian Kennedy
- 5 years ago
- Views:
Transcription
1 _ EH-0817 POWERMASTER Main Features High efficiency and compact size Active PFC Digital Power regulation Wide input voltage range Vac Wide output voltage range Vdc, user settable User settable current limitation threshold Remote ON/OFF or other remote control functions Modbus over RS-485 interface for control and monitoring Multiple protections 2 user programmable voltage steps with settable duration Can be used as battery charger (lead acid, nickel, lithium) Can be used for LED lighting Can be paralleled for power or redundancy (with external ORing Module) Up to 50 C operating temperature with no derating Suitable for POWERMASTER software (available for Windows and Android OS) Excellent versatility, allowing parts stock savings Rev.V2.1 Page 1/4
2 _ EH-0817 TECHNICAL DATA Model type OUTPUT DATA Rated voltage Vdc Adj. output voltage range Vdc (1V resolution programmable) Continuous current 24Vdc, 48Vdc, or Vout x Iout= 200W Max. for Vout > 48Vdc Overload limit 4.4A to 1.9A (depending on Vout) Short circuit peak current 4.9A to 2.2A (depending on Vout) Load regulation 1% Ripple & Noise¹ 200mVpp Hold up time 25ms Battery charger function Battery chemistries Protections Status Signals Parallel connection INPUT DATA Input AC rated voltage Frequency Input DC rated voltage Input AC rated current Vin = 200Vac Vin = 500Vac Input DC rated current Vin = 250Vdc Vin = 725Vdc Standby power Lead Acid Nickel Lithium Overload and short circuit protection Thermal protection Input undervoltage lockout (UVLO) Input overvoltage protection (VDR) C.C. / C.V. (setup via front panel or POWERMASTER application) 7 segment, 3 digits display 3 programming keys ENABLE - isolated remote ON/OFF input, active for 5 30Vdc DC OK - dry contact (NO, 24Vdc / 1A) Modbus over RS-485 interface Possible for power and redundancy (with external ORing module) Nominal: 1/2 phases Vac Range: Vac Hz Vdc 1.4A 0.5A 1.0A 0.4A Power Factor Correction Active > 0.9 Inrush peak current Touch (leakage) current Internal Protection fuse < 4W 50A 0.4mA None, external fuse must be provided Recommended external protection MCB 10A C curve It is strongly recommended to provide external surge arresters (SPD) according to local regulations. GENERAL DATA Efficiency > 82% > 90% (depending Vout) Dissipated power < 21W Operating temperature² - 40 C + 70 C Derating Over 60Vdc: - 1.5W/ C over 50 C Under 60Vdc: - 3.0W/ C over 50 C See Fig.1 Storage temperature - 40 C C Humidity Life time expectation Overvoltage category Pollution degree Input / output isolation Input / ground isolation Output / ground isolation Safety Standards EMC Emission EMC Immunity EN50178 III IEC UL508 (reference) EN60950 (reference) EN50178 (reference) EN55011 (CISPR11) Class A EN55022 (CISPR22) Class A EN Class A EN Level 3 EN Level 3 EN Level 3 EN Level 4 EN Level 2 Protection degree EN60529 IP % r.h. non condensing h (8.1 years) at 25 C ambient full load 4.2kVdc 2.2kVdc 0.75kVdc Vibration sinuosoidal IEC (5-17.8Hz: ±1.6mm; Hz: 2g 2hours / axis (X,Y,Z) Shock IEC (30g 6ms, 20g 11ms; 3 bumps / direction, 18 bumps total) IN/OUT Connection terminals Auxiliary connection terminals Communication interface connector 2.5mm², screw type pluggable ( AWG) Up to 0. 5mm², Fast pluggable type (20AWG) RS-485 through RJ45 Female Rev.V2.1 Page 2/4
3 _ EH-0817 Case material Weight Size (W x H x D) 1) Ripple and Noise are measured with 20MHz bandwidth, probe terminated with a 0.1μF MKP parallel capacitor. 2) Start-up type tested: - 40 C, possible at nominal voltage with load deration. Aluminum 0.75kg 80.0 x x 100.0mm Notes: - For more details, performance and descriptions regarding all parameters not indicated in the above table, please refer to the user manual downloadable from - Technical parameters are typical, measured in laboratory environment at 25 C and 400Vac / 50Hz, at nominal values, after minimum 5 minutes of operation. - Power rating, losses, efficiency, ripple, thermal behaviour and start-up may change outside of the nominal rated input range. Contact factory for details. - Data may change without prior notice in order to improve the product. Fig.1 Operating Temperature Wout [W] [ C] Output < 60Vdc Output > 60Vdc Rev.V2.1 Page 3/4
4 _ EH-0817 DIMENSIONS CONNECTION Input Connection: Single phase: L1 = Line N = Neutral I = Earth ground 2 phases: L1 = Phase 1 L2 = Phase 2 I = Earth ground DC: L1 = + Positive DC L2 = - Negative DC I = Earth ground ENABLE: (5 30Vdc) + = Positive DC - = Negative DC Output Connection: + = Positive DC - = Negative DC Signaling: DC OK: dry contact + = NO - = COM RS-485 PIN4 = TX/RX D1 PIN5 = TX/RX D0 PIN8 = GND Rev.V2.1 Page 4/4
5 Headquarter Switzerland: Pewatron AG Thurgauerstrasse 66 CH-8050 Zurich Phone Office Germany: Pewatron Deutschland GmbH Edisonstraße 16 D Unterschleißheim Phone We are here for you. Addresses and Contacts. Sales Germany & Austria Postcode Postcode Postcode Austria Kurt Stritzelberger Phone Mobile kurt.stritzelberger@pewatron.com Postcode Postcode Gerhard Vetter Phone Mobile gerhard.vetter@pewatron.com Geometrical sensors Sensor elements Thorsten Ravagni Phone thorsten.ravagni@pewatron.com Sales Switzerland & Liechtenstein Postcode Basil Frei Phone Mobile basil.frei@pewatron.com Postcode Christian Mohrenstecher Mobile christian.mohrenstecher@pewatron.com Sales International Key Accounts Peter Felder Phone Mobile peter.felder@pewatron.com Sales Other Countries / Product Management Pressure Sensors Philipp Kistler Phone philipp.kistler@pewatron.com Gas sensors / Gas sensor modules Load cells Dr. Thomas Clausen Phone thomas.clausen@pewatron.com Flow / Level / Medical products Dr. Adriano Pittarelli Phone adriano.pittarelli@pewatron.com Accelerometers / Level Flow sensor elements Thorsten Ravagni Phone thorsten.ravagni@pewatron.com Power supplies Sebastiano Leggio Phone sebastiano.leggio@pewatron.com Linear position sensors Angle sensors Eric Letsch Phone eric.letsch@pewatron.com Drive technology CH Postcode / DE Roman Homa Mobile roman.homa@pewatron.com Drive technology CH Postcode / AT / IT / FR Christian Mohrenstecher Mobile christian.mohrenstecher@pewatron.com Current sensors Power solutions Osman Coban Phone osman.coban@pewatron.com Competitive sensor & power supply solutions worldwide
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications.
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications. Its compact size, high efficiency, excellent reliability together with easy
WAF300_ EH-0817 PART NUMBER STRUCTURE 24:24 28:28 48:48
PART NUMBER STRUCTURE WAF0-48 Series Name Input Voltage () 48:18~75 110:43~160 S Output Quantity Output Voltage () S:Single : 15:15 24:24 28:28 48:48 W Input Range 4:1 N S Remote Control Option Load Share
1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load. LEAKAGE CURRENT Earth leakage current < 300μA/264VAC, Touch leakage current < 100μA/264VAC
MSP-600_040-0-40-0-EH-07 SPECIFICATION MODEL OUTPUT INPUT SAFETY EMC (Note 4) MSP-600-. MSP-600-5 MSP-600-7.5 MSP-600- MSP-600-5 MSP-600-4 MSP-600-6 MSP-600-48 DC VOLTAGE.V 5V 7.5V V 5V 4V 6V 48V RATED
RCP-1600 series. 1600W Rack Mountable Front End Rectifier RCP-1600_ EH File Name:RCP-1600-SPEC
Bauart gepruft Sicherheit egelma ge od o s be wac g RCP-10_0-03-9-022-EH-0317 www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT INPUT PROTECTION SAFETY & EMC (Note 7) OTHERS NOTE RCP-10-12 RCP-10-24
QAE100W SERIES QUARTER-BRICK DC-DC CONVERTER
SERIES QUARTER-BRICK DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 90Watts FEATURES NO MINIMUM LOAD REQUIRED LOW STANDBY POWER CONSUMPTION SOFT-START 2250 INPUT TO OUTPUT BASIC INSULATION SAFETY MEETS
RSP-750_ EH RSP-750 series. 750W Power Supply with Single Output. File Name:RSP-750-SPEC
RSP-750_040-0-409-098-EH-07 750W Power Supply with Single Output File Name:RSP-750-SPEC 06-07-6 RSP-750_040-0-409-098-EH-07 750W Power Supply with Single Output SPECIFICATION MODEL OUTPUT INPUT PROTECTION
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications.
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications. Its compact size, high efficiency, excellent reliability
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply.
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
P-Series Inclinometer
Single or Dual axis inclinometer Measurement range +/-5, +/-15 and +/- 45 High accuracy Digital and analogue output signal DESCRIPTION The P-Series of conductive inclinometers offers modern technology
Optical Shaft Encoder Page 1 of 6. Description. Mechanical Drawing. Features EH-1014.pdf EH-1014
Description Page 1 of 6 The series optical shaft encoder is a non-contacting rotary to digital converter. Useful for position feedback or manual interface, the encoder converts real-time shaft angle, speed,
1.3. Part number for ordering. Non-corrosive gases only (No liquid) 5±0.25
.pdf Features Applications Industrial instrumentation Pressure switch, Pneumatic device Medical device Differential On-chip amplification and temperature compensations Pre-calibration of offset voltage
The MiCS-VZ-89TE is an integrated sensor board for Indoor Air Quality monitoring.
1 MiCS-VZ9TE_1620-21530-0001-E-1016 The is an integrated sensor board for Indoor Air Quality monitoring. The combines state-of-the-art MOS sensor technology with intelligent detection algorithms to monitor
PWM-120_ EH PWM-120 series. 120W PWM Output LED Driver IP67. File Name:PWM-120-SPEC
PWM120_04002409125EH1017 PWM120 series ~ IP67 05 File Name:PWM120SPEC 201704 PWM120_04002409125EH1017 PWM120 series SPECIFICATION MODEL PWM12012 PWM12024 PWM12036 PWM12048 DC VOLTAGE 12V 24V 36V 48V RATED
RCB-1600_ EH-0817 RCB W Rack Mountable Front End Battery Charger. Sicherheit ID File Name:RCB-1600-SPEC
Bauart gepruft Sicherheit egelma ge od o s be wac g _040-03-409-042-EH-0817 www. tuv.com ID 2000000000 _040-03-409-042-EH-0817 SPECIFICATION MODEL OTHERS NOTE -12-24 BOOST CHARGE VOLTAGE(Vboost)(default)
FC22 Compression Load Cell
10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable due
CONNECTION TO THE NETWORK For connecting Profibus encoders to the network, cables within the device can be accessed by the three skintop (in any event
EA PROFIBUS SINGLETURN ABSOLUTE ENCODER PRESENTATION The Eltra singleturn Profibus encoder series (Identification Number 0x0599) is complying to the Profibus DP standard as described on the European Standard
Metrodyne Microsystem Corp
1 MIS-3600_1610-21499-0005-E-1012 MIS-3600 series (Preliminary) Intelligent Pressure Sensor Features Supply Voltage 2.0 to 3.6V 0.5, 1, 5.8, 15, 30 psi differential pressure range Low standby current:
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies.
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
MXD40Multi_ EH-0218 PART NUMBER STRUCTURE. Vo3 (Triple only) 9: 24V. y: refer to Suffix yy. P-DUKE Technology Co., Ltd.
MXDMulti_0-02-2-02-EH-0218 Medical utomation Datacom IPC Industry Measurement Telecom utomobile Boat Charger PV Railway PRT NUMBER STRUCTURE MD U Name Power (W) Input (VC) Quantity 1 () Vo1 D:Dual 3: 5V
MA3. Miniature Absolute Magnetic Shaft Encoder Page 1 of 8. Description. Mechanical Drawing. Features EH-1009.pdf
1 MA-3_1630-21448-0001-E-1009 Page 1 of 8 Description The is a miniature rotary absolute shaft encoder that reports the shaft position over 360 with no stops or gaps. The is available with an analog or
KMT36H 360 Angular Sensor
AMR Sensor with 360 capability TDFN outline 2.5x2.5x0.75 mm 3 Three 120 phase-shifted signals Moderate field strength requirements DESCRIPTION The KMT36H is a magnetic field sensor utilizing the anisotropic
AccuStar Electronic Clinometer
2--32-2-EH-2.pdf 2--32-2-EH-2 Single Axis ±6 Range DESCRIPTION The AccuStar Electronic Clinometer is an extremely accurate angle measurement device. This compact and rugged sensor is ideal where space
MA3. Miniature Absolute Magnetic Shaft Encoder Page 1 of 8. Description. Mechanical Drawing. Features EH-1009.pdf
12503202001EH1009.pdf 12503202001EH1009 Page 1 of 8 Description The is a miniature rotary absolute shaft encoder that reports the shaft position over 360 with no stops or gaps. The is available with an
CLEANING. <7.5mA (streaming 1 sample per second), <20mA Peak mbar ppo₂ 0-25% O₂ (LOX-02) Indication Only / 0.1 C
GENERAL DESCRIPTION The Family (LOX) is a range of factory calibrated oxygen sensors which measure ambient oxygen partial pressure (ppo₂) levels using the principle of fluorescence quenching by oxygen.
ELG-100_ EH ELG-100 series. 70~100W Constant Voltage + Constant Current LED Driver IP67 IP65. File Name:ELG-100-SPEC
Ⅱ ~ IP65 IP67 { A Dx SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT OTHERS NOTE DC VOLTAGE ELG10024 24V ELG10036 36V ELG10042 42V ELG10048 48V ELG10054 54V CONSTANT CURRENT REGION Note.2 12 ~
Angle sensors
Housing Ø [mm] Supply voltage [V] Output signal Number of outputs Angle el. [ ] Mounting Output Connection HP-8 22.3 0...40 0 to 00% Vin 3600 Bushing M9 Wire CP-22H-xS 22 x 30 5 0 to 90% Vin, 2 800 to
180~240W Constant Voltage + Constant Current LED Driver ELG-240 series
IP65 IP67 8 Ⅱ ~ { A Dx SPECIFICATION MODEL OUTPUT INPUT OTHERS NOTE ELG24024 ELG24036 ELG24042 ELG24048 ELG24054 DC VOLTAGE 24V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.2 12 ~ 24V 18 ~ 36V 21 ~ 42V
E L G T C s e r i e s 110 IP65 IP67 Features Applications Description Model Encoding ELGT C700 A
IP65 IP67 Ⅱ Ⅱ Ⅱ A SPECIFICATION MODEL OUTPUT RATED CURRENT RATED POWER CONSTANT CURRENT REGION Note.2 107 ~ 214V 72 ~ 143V OPEN CIRCUIT VOLTAGE(max.) 225V 151V Adjustable for AType only (via builtin potentiometer)
LDC-55_ DH Preliminary. LDC-55 series. 55W Constant Power output Linear LED Driver. File Name:LDC-55-SPEC
8 SPECIFICATION MODEL OUTPUT INPUT OTHERS NOTE OUTPUT CURRENT REGION CONSTANT POWER OUTPUT VOLTAGE REGION Note.2 OPEN CIRCUIT VOLTAGE(max.) CURRENT TOLERANCE ±5.0% SET UP TIME Note.4 500ms/230VAC VOLTAGE
ColibrysACCELERATION
MS9000 DATASHEET Single axis analog accelerometer Accelerometer specifications The MS9000 product is MEMS capacitive accelerometer based on a bulk micro-machined silicon element specifically designed for
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
PBM230 series Digital barometer
PBM230 series Digital barometer Features Supply voltage: 1.7 to 5.5V(V DD ) 1.2 to 5.5V(V DDIO ) 300 to 1100 hpa pressure range 8cm altitude resolution (RMS) 2.2ms fastest conversion time Standby current
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
Electrochemical Sensors Application Note 2 Design of Electronics for Electrochemical Gas Sensors
Microprocessor 1 ECDiagram_1620215300060E0916 INTRODUCTION This application note gives guidance on the design of electronic circuits for use with GX ensortech electrochemical gas sensors. There are 4 types
PDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
Instruction Manual DPG-Series Inclinometer
DPG-Series Inclinometer Version 1.2 1 of 15 Contents 1 History 3 2 2.1 2.2 General Information Features Type and order codes 3 3 3 3 3.1 General Information Notice 4 4 4 4.1 General function of the inclinometer
EH-1112.pdf. MR-whitepaper_ E-1112 WHITE PAPER MEASURING ANGLE
1 WHITE PAPER 2 TABLE OF CONTENT ABSTRACT 3 SENSORS 4 EXTERNAL MAGNET 7 DESIGN CONSIDERATIONS ALIGNMENT GAP EXAMPLE 7 9 9 10 SIGNAL EVALUATION CIRCUIT 12 GENERAL MICROCONTROLLER BASED SOLUTION INTERPOLATOR
DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
POWERBOX Defense Line 1200 DBA Series 1200W AC/DC Conduction Cooled. Preliminary
Preliminary Description The DBA series, very compact and low profi le AC/DC power supply up to in chassis format, incorporates input filtering, input and output protections, very robust mechanical mounting
S C A D 0 1 P R O D U C T S P E C I F I C A T I O N F O R XY- D U A L A X I S A C C E L E R O M E T E R 1 SCA1000-D01_ E-1118
1 _1640-21648-0009-E-1118 P R O D U C T S P E C I F I C A T I O N F O R XY- D U A L A X I S A C C E L E R O M E T E R S C A 1 0 0 0 D 0 1 Murata Electronics Oy 1/18 2 _1640-21648-0009-E-1118 Table of Contents
Watts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
Electrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
AC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Remote ON/OFF Function 200 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Standby 5V@1A with Fan, @0.4A without
420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
Switching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
The MiCS-VZ-87 is an integrated sensor board for Indoor Air Quality monitoring.
The is an integrated sensor board for Indoor Air Quality monitoring. The combines state-of-the-art MOS sensor technology with intelligent detection algorithms to monitor VOCs and CO2 equivalent variations
Specification DPL-Series Inclinometer Module
DPL-Series Inclinometer Module Version.9 of 3 Contents. History.. General Information Functional Description Part Number 3 3. 3. 3.3 3. 3. 3.6 3.6. 3.6. Mechanics and Connections Mounting Label information
TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
ECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
Power Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
C B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
Efficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
Ordercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
PSU s e r i es
000W Single Output Power Supply PSU48-000-0 s e r i es SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
MI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:
MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency
ECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
SCA3300-D01_ E-1118
1 Data Sheet 3-axis Industrial Accelerometer and Inclinometer with Digital SPI Interface Features 3-axis high performance accelerometer with ±1.5g to ±6g user selectable measurement range Extensive self-diagnostics
15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
POWERBOX Defense Line 1200 DBA Series 1200W AC/DC Conduction Cooled Manual. 2. Features. 1. Introduction
Table of Contents 1. Introduction P1 2. Features P1 3. Block diagram P2 4. Options description P3 5. Input P3 6. Output P4 7. Auxiliary functions P5 8. Electromagnetic P6 9. Mechanical P8 10. Connector
1500W Single Output Power Supply AK V 100A 0~100A 1500W. 150mVp-p. Adjustment of output current is between 40 ~ 105% of rated output
AK-0 Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to % +5V / 0.5A auxiliary output Intelligent LED indicators.5u
Electrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
General. Environmental. EMC & Safety
65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package
KMA36 Contactless Rotational and Linear Encoder
1 _1630-21559-0001-E-1117 SPECIFICATIONS Contactless Absolute 360 (180 ) angle measurement Incremental mode Linear mode Standard I2C Interface (100 khz) Programmable resolution up to 13 bit (0.04 degree)
CCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
24V 40A 0 ~ 40A 960W. 150mVp-p 20 ~ 26.4V 83% 85% 88% 88% 90%
000W Single Output Power Supply RSP-000 s eries SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
Features : 15V 50A 0 ~ 50A. 750W 150mVp-p. 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.
SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION ENVIRONMENT SAFETY EMC (Note ) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED WER RIPPLE NOISE (max.) Note. 0mVp-p VOLTAGE ADJ. RANGE VOLTAGE
RCP-1600 series. 1600W Rack Mountable Front End Rectifier. File Name:RCP-1600-SPEC Sicherheit ID
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 10W Rack Mountable Front End Rectifier SPECIFICATION MODEL OUTPUT INPUT PROTECTION SAFETY & EMC (Note 7) OTHERS NOTE RCP-10-12
LB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
Switched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
1000W Single Output Medical Type. MSP-1000 series. File Name:MSP-1000-SPEC
000W Single Output Medical Type MSP-000 series File Name:MSP-000-SPEC 08-05-04 000W Single Output Medical Type MSP-000 series SPECIFICATION MODEL MSP-000- MSP-000-5 MSP-000-4 MSP-000-48 DC VOLTAGE V 5V
3000W Single Output Power Supply AK V 200A. 0 ~ 200A 3000W 150mVp-p
000W Single Output Power Supply AK-000 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 0% ) Programmable output Current ( 0% ~ 0% ) High efficiency up to % +V /
DRP-3200 series. 3200W Rack Mountable Front End Rectifier. File Name:DRP-3200-SPEC Sicherheit ID
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 3200W Rack Mountable Front End Rectifier / SPECIFICATION MODEL DRP-3200-24 DRP-3200-48 DC VOLTAGE 24V 48V RATED CURRENT 133A
800W Single Output Power Supply
Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( 0% ~ 05% ) U profile, High power density Constant current limiting High efficiency up
1000 ~ 3000W 1U Distributed Power System RCP-1U Rack System
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 000 ~ 3000W U Distributed Power System RCP-U Rack System - File Name:RCP-U Rack System-SPEC 206-0-30 000 ~ 3000W U Distributed
CP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
solo Ultra-high efficiency 1U size Xsolo Single Output Power Supply 500W W 2 FEATURES APPLICATIONS INCLUDE
XS XS solo Ultra-high efficiency 1U size FEATURES The family of single output power supplies provides up to an incredible 1008W in an extremely compact package. Single output: 24V, 36V or 48V IEC60950
Power supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
CLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
DRF Series. 120W - 480W Single Output: 24V 180W - 720W Peak Power DIN Rail Mount Power Supplies. DRF Series 1. Specifications
DRF Series www.emea.tdk-lambda.com/drf 120W - 480W Single Output: 24V 180W - 720W Peak Power DIN Rail Mount Power Supplies Features 150% Peak Power, 4 sec Efficiency up to 94% Ultra Compact Footprint ErP
NLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
IP65 IP mVp-p 13.5 ~ 17V. 150mVp-p 17 ~ 22V 22 ~ 27V. Can be adjusted by internal potentiometer or through output cable
IP65 IP67 SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V
Switched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
1500W Programmable Single Output AK V. 48V Rated Current. 31.3A Current Range 100A. 0~31.3A Rated Power 0~100A 1500W
500W Programmable Single Output AK-500 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (40% ~ 05%) +5V / 0.5A auxiliary output High power
IP65 IP mVp-p 13.5 ~ 17V. 150mVp-p 17 ~ 22V 22 ~ 27V 4.65 ~ 9.3A 1.0% 3.9 ~ 7.8A 1.0%
IP65 IP67 SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option