General. Environmental. EMC & Safety
|
|
- Paul Allison
- 5 years ago
- Views:
Transcription
1 65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package <0.5 W No Load Input Power Low Leakage Current 3 Year Warranty Specification Input Input Voltage -264 VAC (275 VAC ECS65) (20-3 VDC), derate output power < VAC, see derating curves Input Frequency 47-0 Hz () Input Current 65 W:.0/0.6 A typical at 5/2 VAC W:.5/0.9 A typical at 5/2 VAC, W:.9/. A typical at 5/2 VAC full load Inrush Current A max at 2 VAC, cold start at 25 C Power Factor EN-3-2, class A No Load Input Power <0.5 W Earth Leakage Current 65/ W: 2 µa at 264 VAC/ Hz max W: 2 µa at 264 VAC/ Hz max Input Protection Internal T3.5 A/2 V fuse in line and neutral Output Output Voltage 2-48 VDC (see tables) Output Voltage Trim ±0% Initial Set Accuracy ±% Minimum Load No minimum load required Start Up Delay s typical Start Up Rise Time ms Hold Up Time 6 ms min at 5 VAC Drift ±0.2% after 20 min warm up Line Regulation ±0.5% max Load Regulation ±% Over/Undershoot 5% typical Transient Response 4% max. deviation, recovery to within % in 0 µs for a -75-% load change Ripple & Noise % pk-pk, 20 MHz bandwidth Overvoltage Protection 5-% Vnom, recycle input to reset Overload Protection 0-% Short Circuit Protection Continuous trip and restart (hiccup mode) Temperature 0.05%/ C Coefficient. Safety approvals cover frequency Hz. General Efficiency Up to % model dependent Isolation 00 VAC Input to Output, 2 x MOPP, 0 VAC Input to Ground, x MOPP, 0 VDC Output to Ground, x MOPP Switching Frequency 65 KHz typical Power Density 65 W: 7.7 W/in 3, W: 0 W/in 3, W: 3 W/in 3 MTBF 65 W: 8 khrs, W: 834 khrs, W: 75 khrs to MIL-HDBK-27F at 25 C, GB Environmental Operating Temperature -20 C (- C, ECS) to + C derate linearly from + C at 2.5%/ C to % load at + C. Cooling Convection & fan cooled ratings (see tables) Operating Humidity 95% RH, non-condensing Storage Temperature - C to +85 C Operating Altitude 65- W: 00 m, W: 00m Shock g pk, half sine, 6 axes Vibration 2 g rms, 5 Hz to 0 Hz, 3 axes EMC & Safety Low Voltage PSU EMC EN6204-3, high severity level Emissions EN5/22 level B conducted EN5/22 level A radiated, level B Suffix -B models Harmonic Currents EN-3-2, class A Voltage Flicker EN-3-3 ESD Immunity EN-4-2, ±6 kv Contact, ±5 kv Air Discharge, Perf Criteria A Radiated Immunity EN-4-3, level 3 Perf Criteria A EFT/Burst EN-4-4, level 3 Perf Criteria A Surge EN-4-5, installation class 3 Perf Criteria A Conducted Immunity EN-4-6, level 3 Perf Criteria A Dips & Interruptions EN-4-, % 0 ms, % ms, % 00 ms, Perf Criteria A, B, B, EN--2, % 0 ms, % ms, % 0 ms, % 00 ms, Perf Criteria A, A, A, B - 2 VAC. Consult longform datasheet for 5 V operation. Safety Approvals IEC9- CB report, CSA 22.2 No. 9-, UL9-, TUV EN9- IEC- CB report, CSA 22.2 No. -, ANSI/AMMI ES-, TUV -, including risk management Equipment Protection Class I & II (ECS65 Non -B models, Class Class I only)
2 Models and Ratings ECS65 Output Power Output Voltage Output Current Model Number () 65 W 2.0 VDC 5.4 A ECS65US2 65 W 5.0 VDC 4.3 A ECS65US5 65 W 8.5 VDC 3.4 A ECS65US8 65 W 24.0 VDC 2.7 A ECS65US24 65 W 28.0 VDC 2.3 A ECS65US28 65 W 48.0 VDC.4 A ECS65US48 AC-DC. For Class B radiated emissions models, add suffix -B to model number. For covered versions, add suffix -C to model number or order part no. ECM/ COVER for standalone cover. Derate output power by 20% with cover. The cover is not suitable for Class II installations (0.6) 0.25 (3.7) 3.7 (95.25).05 (26.7) C (.8).75 (44.45) J 2 C5 T 0.95 (24.) (24.5) 0.25 (3.8) 0.25 Faston Ground Tab Q 4 X ø.56 (3.96) Mounting Holes ø.32 (7.92) Clearance top and bottom 0.4 (3.5) SMD Component Height In put Connector J Pin Line Output Connector Pin +V Pin 2 +V J mates with Molex Housing PN , mates with Molex Housing PN and both with Molex Series 594 Crimp Terminals. All dimensions in inches (mm). Tolerance.xx = ±0.02 (0.);.xxx = ±0.0 (0.25) 2. Weight: lbs (75 g) Derating Curve - ECS65 Models Output Load (%)
3 Models and Ratings ECS Output Power Forced Cooled (0 CFM) Output Voltage Output Current Model Number () W W 2.0 VDC 8.3 A ECSUS2 W W 5.0 VDC 6.7 A ECSUS5 W W 8.0 VDC 5.5 A ECSUS8 W W 24.0 VDC 4.2 A ECSUS24 W W 28.0 VDC 3.6 A ECSUS28 W W 48.0 VDC 2. A ECSUS48. For Class B radiated emissions models, add suffix -B to model number. For covered versions, add suffix -C to model number or order part no. ECM/ COVER for standalone cover. Derate output power by 20% with cover. The cover is not suitable for Class II installations. -C not available for -B models (0.6).25 (3.8) 0.25 (3.8) 3.7 (95.25) C4 (.8 +.5/-0.00).00 (25.4) 0.25 (3.8) -B Model.7 (44.45) J C5 Q 4. (4.3) T 0.25 Faston Ground Tab 4 X ø.56 (3.96) Mounting Holes ø.32 (7.92) Clearance top and bottom Voltage Adj..0 (25.7) 0.4 (3.5) SMD Component Height.25 (3.8) Output Connector Pin +V Pin 2 +V In put Connector J Pin Line (.8 +.5/-0.00) 0.37 (9.52).00 (25.4) 0.25 (3.8) 0.0 (2.5).75 J (44.45) 0.20 (5.) 3.75 (95.25) 4 X ø.56 (3.96) Mounting Holes ø.32 (7.92) Clearance top and bottom 0.25 Faston Ground Tab.0 (25.7) 0.4 (3.5) SMD Component Height J mates with Molex Housing PN , mates with Molex Housing PN and both with Molex Series 594 Crimp Terminals. All dimensions in inches (mm). Tolerance.xx = ±0.02 (0.);.xxx = ±0.0 (0.25) 2. Weight: lbs (75 g) Derating Curve - ECS Models Output Power (%) Force-cooled >0 CFM Input Voltage (VAC)
4 Models and Ratings. For covered versions, add suffix -C to model number or order part no. ECM/ COVER for standalone cover, see derating curve. The cover is not suitable for Class II installations. -C. ECS Output Power Forced Cooled (0 CFM) Output Voltage Output Current Model Number () W W 2.0 VDC 0.9 A ECSUS2 W W 5.0 VDC 8.7 A ECSUS5 W W 8.0 VDC 7.3 A ECSUS8 W W 24.0 VDC 5.4 A ECSUS24 W W 28.0 VDC 4.7 A ECSUS28 W W 48.0 VDC 2.7 A ECSUS48 AC-DC 0.25 (3.7) 4.00 (0.6) 3.7 (95.25).28 (32.5) C9 Voltage Adjust N (.8 +.5/-0.00).75 (44.45) 2 J T L.00 (25.4) C (26.7) 0.2 (3.8) Q.25 FASTON GROUND TAB 0.5 (3.8) SMD COMPONENT HEIGHT 4X 0.56 (3.96) MOUNTING HOLES 0.32 (7.92) CLEARANCE TOP AND BOTTOM In put Connector J Pin Line. All dimensions in inches (mm). Tolerance.xx = ±0.02 (0.);.xxx = ±0.0 (0.25) 2. Weight: lbs (75 g) J mates with Molex Housing PN , mates with Molex Housing PN and both with Molex Series 594 Crimp Terminals Output Connector Pin +V Pin 2 +V Derating Curve - ECS Models Forced-cooled >0 CFM Some specification parame ters may not be met Forced-cooled >0 CFM 264 Input Voltage (VAC)
5 Covered Version (not available for ECS-B Models) 4.49 (4.0) ECS65// 2.52 (64.0) Input Connector Output Connector 0.25 (0.6) Ground Faston Terminal 0.7 (20.).54 (39.0) 2 x M3 x 0.5 THD 0.6 (4.0) Max Screw Penetration 0.79 (20.0) (03.00) (03.00) 0.22 (5.5) 0.22 (5.5) (25.00) 4 x M3 x 0.5 THD 0.6 (4.0) Max Screw Penetration. All dimensions in inches (mm). Tolerance.xx = ±0.02 (0.);.xxx = ±0.0 (0.25) 2. Weight: 0.8 lbs (3 g) Thermal Considerations - All Models In order to ensure safe operation of the PSU in the most adverse conditions permitted in the end-use equipment, the temperature of the components listed in the table below must not be exceeded. See mechanical drawing for component locations. Temperature should be monitored using K type thermocouples placed on the hottest part of the component (out of any direct air flow). Temperature Measurements (Ambient C) Component Max Temperature C T 0 C C5 C C4/C9 C Q 0 C 2 April 8
DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More informationOutput Voltage (Vfan) & Current
C-DC Power Supplies 50/80/250/350 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safey pprovals (Class I & II) < 0.5 W Standby Power (50 & 80 Models) -40 C to +70 C Operation
More informationOutput Voltage (Vfan) Convection-cooled (6,7) Forced-cooled (8) & Current
C-DC Power Supplies 5/8/25/35 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safety pprovals (Class I & II)
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
More informationMedical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationGeneral. Environmental. EMC & Safety
AC-DC 400-2500 Watts f lexpower Series Configurable for Fast Time to Market SEMI F47 Compliant xppower.com Flexible Series & Parallel Capability -20 C Operation Extra Power Available at High Line Optional
More informationECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
More informationOutput Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
More information420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
More informationCCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationWatts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
More informationPage 2 - ECS65 Page 13 - ECS100
ECS65 & ECS100 Page 2 - ECS65 Page 13 - ECS100 ECS65 Series IT & Medical Safety Approvals
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationM A D 65 U S 12 B - PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 65 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationNLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 40 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationMAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 30 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M S D 30 U S 12 B - T Application Package Dimension Output Input Output Output Protection
More informationLFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1. Automation Datacom IPC. Industry Measurement Telecom
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE TAD 65 U B - xx yy - Series Name Output Input Output Output Output Output Output Protection
More informationW a tts A H M S e r ie s A C D C. S p e c if ic a tio n. G e n e r a l. In p u t. E n v ir o n m e n ta l. E M C & S a f e ty.
8 5 5 0 W a tts A H M S e r ie s IT & M e dic a l A ppro va ls E ne rg y E ffic ie nc y L e ve l V, C E C 0 0 8 & E IS A 0 0 7
More informationCompliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight
IEC 1-1-2 4th Edition Compliant BF (Body Floating) Rated Class II Construction for Home Health Care Applications Class I With Functional Ground Connection 3 x 5 Footprint ua @ 264VAC Earth Leakage Current
More information150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
More informationElectrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
More informationElectrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
More informationPOWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
More informationPDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
More informationPEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
More informationElectrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationFeatures. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationThese medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More informationFor more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
More informationFeatures. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationThe MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
More information3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
More informationXSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
More informationMVAB120 Series 120W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAB120 Series FEATURES ITE (2nd) and Medical 3rd ed. 1MOPP (primarysecondary) safety approved 120W compact high density 2" x 4" standard footprint High effi ciency up to 91% Universal
More informationElectrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
More information5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
More informationElectrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
More informationElectrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
More informationThese medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
More informationsolo Ultra-high efficiency 1U size Xsolo Single Output Power Supply 500W W 2 FEATURES APPLICATIONS INCLUDE
XS XS solo Ultra-high efficiency 1U size FEATURES The family of single output power supplies provides up to an incredible 1008W in an extremely compact package. Single output: 24V, 36V or 48V IEC60950
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationThese power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
More informationGeneral. Efficiency Isolation. Dimensions Net Weight. Safety & EMC
10KV Lightning Surge Protection Smart Over-Temperature Protection Universal AC Input up to 305Vac High Efficiency (Up to 92%) Active Power Factor Correction Constant Current With Dimming Options Waterproof
More informationIMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More information3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The ABC41 Series of ultra low open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in a variety
More informationThe MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
More informationFeatures. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationThis convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationIMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 1000 Watts Power Supply Series for medical and industrial applications Product data sheet Features 1000 Watts Power Supply Series for medical and industrial applications Safety rated for Medical, Industrial
More informationThe MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
More informationIndustrial Serie +600S
D A T A S H E E T Industrial Serie +6S Modular Configurable Reduced fan noise Enhanced Line Derating 6 watts in the palm of your hand The +6S series fetures improved low input line derating delivers 6
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
More informationOrdercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
More informationIMA 400 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 400 Watts Power Supply Series for medical and industrial applications Product data sheet 400 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More informationModel Vnom Power Description Set Point Dynamic Vtrim Imax Remote Power (V) (W) Adjust Range (V) Range (V) (A) Sense Good
XS XS 400W-800W solo Ultra-high efficiency 1U size FEATURES Single output: 24V or 48V EN60950 2 nd Edition & EN60601-1 2 nd and 3 rd Edition Ultra high efficiency, >92% Low profile: 1U height (40mm) Convection
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationMTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
More informationFeatures. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter
Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical
More informationSirius 250/350 Watts, Single / Multi output AC-DC, modular power solution
Up to 350W Up to 6 outputs Voltages up to 28V, Current up to 50 mps Fast-on output connection Worldwide approvals 3 Year Warranty Sirius 250/350 Watts, Single / Multi output C-DC, modular power solution
More informationAC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Cooling by Free Air Convection 160 Watts and 240 Watt with 10CFM Forced Air 4000VAC Input to 2MOPP Insulation High Efficiency up to 94% With P.F.C.
More informationMB120S 120W Single Output Medical Series
Features 2 x 4 x 1.25 Package, Ideal for 1U Applications 10-year Life design with Premium E-Caps 100 Watts convection cooled Class B Conducted and Radiated EMI performance BF Isolation Type Rated Designed
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single
More informationModel Vnom Power Description Set Point Dynamic Vtrim Imax Remote Power (V) (W) Adjust Range (V) Range (V) (A) Sense Good
XS XS Xsolo 400W-800W solo Ultra-high efficiency 1U size FEATURES Single output: 24V or 48V EN60950 2 nd Edition & EN60601-1 2 nd and 3 rd Edition Ultra high efficiency, >92% Low profile: 1U height (40mm)
More informationNote1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)
Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationModel Selection Model Output Current Total OVP Number Class Volts (Convection Cooled) Efficiency 1 Ripple &Noise 2 Regulation Threshold
Features 2 x 3.5 x 1.3 Package, Ideal for 1U Applications 10-year life design with Premium E-Caps 65 Watts convection cooled Class I and Class II models Class B Conducted and Radiated EMI Performance BF
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
More informationAsia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
More informationTE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range IP22 Rated Enclosure Meets Heavy Industrial Levels
More informationCLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
More informationABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC120 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 120 W of output power in a compact footprint, with a variety of isolated single output voltages.
More informationFeatures. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
More informationNFF Series. CoolX600 NFF Series Cool. Patent Pending Resonant Technology. NFF Series; No Fan Featured
Cool TM 600 NFF Series Patent Pending Resonant Technology NFF Series; No Fan Featured 100 natural convection cooled No internal or external fans needed No base-plate needed No Acoustic Noise or Vibrations
More informationModel Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise Efficiency(min/nom) Capacitive Load
130 Watts Output Power Triple Outputs Universal 90-264VAC Input 4242VDC Input to Output Isolation Active Power Factor Correction 3 x 5 x 1.4 Model Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise
More informationCB Scheme UL508 UL ATEX II3G
Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More informationAll specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More information