UL CONDITIONS OF ACCEPTABILITY
|
|
|
- Stuart Carpenter
- 5 years ago
- Views:
Transcription
1 Certificate Number: Date: UL CONDITIONS OF ACCEPTABILITY Company Name: FUTURE DESIGN CONTROLS INC File-CCN: E QUYX2 Product Description: Process Control Equipment, Electrical Models: FDC-L91 Series f/b 4 or 5, f/b 1 thru 4, f/b 1, 2, 6, or C, f/b 0, 1, 2, 6, 7, 8, 9, A, B, C, D, E or F, f/b blank or AA thru ZZ FDC-4300, f/b 4 or 5, f/b 1, f/b 0 thru 6 or C, f/b 0 thru 9 or C, f/b 0 or 1, f/b 0 or 1, f/b 0 thru 5, f/b blank, 0 or 1, f/b blank or AA thru ZZ. FDC Series f/b 4 or 5, f/b 1, f/b 0 thru 6 or C, f/b 0 thru 9 or C, f/b 0, 1 or 2, f/b 0 thru 5, f/b blank or AA thru ZZ, Suitable to be mounted on vertical position on a flat surface of Type 4X enclosure. Conditions Of Acceptability: When installed in the final use equipment, etc., the following are among the considerations to be made: 1. The device shall be installed in compliance with the enclosure, mounting, spacing, and segregation requirements of the ultimate application. Device shall be installed so that only the face of the enclosure is exposed in the end product. 2. The spacings, ratings, etc., recorded herein shall be judged in the ultimate application. 3. The terminals are not acceptable for field connection. The acceptability of connections to these terminals, including temperature and secureness, shall be determined in the ultimate application. Ratings: Electrical Supply Input: Minimum 90, Maximum 264 V ac, Hz, 7 W maximum, or 15 VA maximum Minimum 11, Maximum 26 V ac or dc, SELV, Limited Energy, 7 W maximum, or 15 VA maximum Control Sensor: SELV, Limited Energy Load Output: See Designation System Environmental: Maximum operating temperature, 50 C This document is for reference only. It is current as of the date referenced above, and is subject to change at any time without notice.
2 Nomenclature: FDC-L91 Last 2 digits codes 5 & 6 are for special faceplate only, Typically these last 2 digits are left blank 1 - Power Input V ac, 50/60 Hz Vac/Vdc 2 - Signal Input 1 Universal Input T/C, RTD mv 2 Voltage DC: 0-1, 0-5, Voltage: 0-10 V 4 ma: 0-20, Output 1 1 Form C Relay (SPDT) 2 resistive (N.O.) 2 SSR drive 5V 6 Triac C SSR 4 - Option 1 Form A Relay 2A@240 Vac resistive (N.O.) 2 SSR Drive 5VDC@30mA 6 Triac - 1Amp@240 Vac 7 Transmitter Power Supply 20Vdc/25 ma (isolated) 8 Transmitter Power Supply 12Vdc/40 ma (isolated) 9 Transmitter Power Supply 5Vdc/80mA (isolated) A RS-485 (Modbus RTU) B Remote Reset C SSR Drive, D Retransmission: 0-20/4-20 ma E Retransmission: 0-5/1-5VDC,(isolated) 10k ohm load min F Retransmission: 0-10VDC, (isolated) 10k ohm load min 5 Faceplate Blank: AA thru ZZ: Standard logo on faceplate Custom logo or no logo on faceplate
3 Nomenclature: FDC-4300 DESIGNATION SYSTEM: Example: Model FDC X X X X X X X X X I II III IV V VI VII VIII IV X [Last two-digit code (Option X) is for special faceplate only ; typically this is left blank.] I - Basic System FTC-4300 II - Power Input V ac, 50/60 Hz V ac/v dc III - Signal Input 1 Standard Input Input 1 - Universal T/C, RTD or 4/20, 0-20 ma 0-1V, 0-5V, 1-5V, 0-10V dc Input 2 CT and Analog input* 4-20, 0-20 ma, 0-1V, 0-5V, 1-5V, 0-10V dc Current Transformer : 0-50 Amp AC current transformer Input 3 - Event Input** IV - Output 1 1 Form A Relay rated 2A/240V ac resistive (N.O.) 2 SSR Drive 5 V ma /0-20 ma linear, isolated, max load 500 ohms V/0-5 V dc linear, isolated, min impedance V dc linear, isolated, min impedance 6 Triac 1A/240 V ac C SSR Drive 14 V V - Output 2 1 Form A Relay 2A/240 V ac resistive (N.O.) 2 SSR Drive 5 V ma ma/0-20 ma linear, isolated, max load 500 ohms V/0-5 Vdc linear, isolated, min impedance V dc linear, isolated, min impedance 6 Triac 1A/240 V ac 7 Transmitter Power Supply 20VDC/25 ma (isolated) 8 Transmitter Power Supply 12VDC/40 ma (isolated) 9 Transmitter Power Supply 5VDC/80 ma (isolated)
4 C SSR Drive ma VI - Alarm 1 1 Form C Relay 2A/240 V ac resistive (SPDT) VII - Alarm 2 1 Form A Relay 2A/240 V ac resistive (N.O.) VIII - Communications 1 RS-485 Modbus RTU 2 RS-232 Modbus RTU 3 Retransmission: 0-20/4-20 ma, isolated, 500 ohm load min 4 Retransmission: 0-5 V/1-5 V dc, isolated, 10K ohm load min 5 Retransmision: 0-10 V dc IV Enclosure Options Blank: None 0: None 1: Nema 4X X Faceplate Blank: Standard logo on faceplate AA thru ZZ: Custom logo or no logo on faceplate Nomenclature: BTC-9300 DESIGNATION SYSTEM: Example: Model BTC X X X X X X I II III IV V VI VII I - Basic System II - Power Input V ac, Hz V ac/v dc, SELV, Limited Energy III - Signal Input 1 Standard Input Input 1 - Universal Input Thermocouple: J, K, T, E, B, R, S, N, L RTD: PT100 DIN, PT100 JIS
5 Current: 4-20 ma, 0-20 ma Voltage: 0-1V, 0-5 V, 1-5 V, 0-10 V Input 2 - CT : 0-50 A Voltage Input: 0-1 V, 0-5 V, 1-5 V, 0-10 V Input 3 - Event Input (EI) IV - Output 1 1 Relay rated 2 A/240 V ac 2 Pulse voltage to drive SSR, 5 V/30 ma 3 Isolated 4-20 ma/0-20 ma 4 Isolated 1-5 V/0-5 V 5 Isolated 0-10 V 6 Triac Output 1 A/240 V ac, SSR C Pulse voltage to drive SSR, 14 V/40 ma
Temperature Controls
Model TZ4 Temperature Controller 5 Models In Sizes From 1/16 to 1/4 DIN New Lower Control Prices! Two Alarm Outputs Standard, Each with Nine Selectable Alarm Functions. Dual Display Process Value and Set
High Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
PID CONTROLLERS LT SERIES
PID CONTROLLERS LT SERIES The Axis family of microprocessor based controllerscombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4
Fuzzy Temperature Controllers E5AF
Fuzzy Temperature Controllers 1/4 DIN Controller Combines Fuzzy and PID Control For Fast Response to Process Disturbances Advanced PID control provides optimal response during start-up and steadystate
Excellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
CT325 Miniature DC Temperature Controller
CT325 Miniature DC Temperature Controller Overview The CT325 Miniature DC Temperature Controller is designed for use with Minco Thermofoil heaters and RTD or thermistor sensors. It offers inexpensive on/off
- SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND LINEAR INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION
ADVANCED - CONTROLLERS - SMART TUNE- PID CONTROL - UNIVERSAL, 3 WIRE- TC, RTD AND INPUT - AUX- REMOTE SET POINT/ TRIM INPUT - 2x ISOLATED CONTROL AND RETRANSMISSION (ma) OUTPUTS - 4x EVENT OR ALARM OUTPUTS
Data Acquisition Modules/ Distributed IO Modules
User Manual Data Acquisition Modules/ Distributed IO Modules Future Design Controls, Inc. 7524 West 98 th Place / P.O. Box 1196 Bridgeview, IL 60455 888.751.5444 - Office: 888.307.8014 - Fax 866.342.5332
Page H x 96 W x 69.5 D mm (1.89 x 3.78 x 2.74 in)
Page 19 Page 29 MODEL Dimensions K3TL 48 H x 96 W x 69.5 D mm (1.89 x 3.78 x 2.74 in) E5C2 48 H x 48 W x 86.7 D mm (1.89 x 1.89 x 3.41 in) Description & input and scale ranges Digital temperature display
MICROPROCESSOR-BASED METERING EQUIPMENT SECTION 16901C PART 2
PART 1 PART 2 PRODUCTS 2.01 MANUFACTURERS A. Eaton products B.. C.. The listing of specific manufacturers above does not imply acceptance of their products that do not meet the specified ratings, features
Falcon F35 & F45 Digital Panel Meters
1/8 DIN Indicator 3-1/2 or 4-1/2 digit bright red LED display Front panel pops off for easy decimal point setting and display scaling Only 3.12 (79mm) required behind panel Optional excitation output NEMA
New Signal Conditioner VJ series
New Signal Conditioner VJ series Yokogawa M&C corporation 1st Edition March 2000 Signal Conditioner Families YTA series* Temperature transmitter VJ series Small Plug-In type Intelligent Communication New
PID Controller-Single Loop (1/16 DIN - Microcontroller Based) (Product Code 10.10)
PID Controller-Single Loop (1/16 DIN - Microcontroller Based) (Product Code 10.10) PID-480 Model Wise Description: Sr. No Model Description Size (mm.) 10.10 PID-480-U PID Controller (Universal Input) 48
MICRO-CONTROLLER X (48 48 mm)
PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature
Temperature Controllers E5 J
Temperature Controllers Advanced PID Controller with Fuzzy Logic-Based Adaptive Tuning Provides Optimum Performance Available in 3 standard DIN sizes: Choose 1/4, 1/8 and 1/16 DIN Fuzzy adaptive tuning
PROCESS & TEMPERATURE CONTROLLERS
PROCESS & TEMPERATURE CONTROLLERS NOVA PD54 Series Thermocouple, RTD, & Process Inputs High Accuracy Auto-Tuning PID Heating & Cooling Models Universal Power Supply 1-24 VAC Up to 3 Relays & 2 Analog Outputs
4-20mA, 0-10V and general process measuring bargraph displays
Page 1 of 6 Digital panel meters Large displays Bargraphs Transmitters 4-20mA, 0-10V process input bargraph displays Display almost any physical variable... The bargraph displays on this page accept most
Miniature Low-Cost Temperature Transmitters MTX
Miniature Low-Cost Temperature Transmitters MTX Two-Wire Design 4-20 ma dc Output ±0.1% Accuracy Upscale Break Protection Non-Isolated Mountable in Any Standard Protection Head Accepts J, K, T, E Thermocouple
LAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate True RMS AC Voltage & Current Meter with 1 Cycle Update at 50/60 Hz Features True AC or AC plus DC RMS measurement with crest factor of 3.0 at FS Fast response: reading
User Manual Universal Process Indicator
User Manual Universal Process Indicator DQ-500 UN series (Applicable for Temperature, Humidity, Pressure, CO2, Air velocity,level etc ) Digiqual Systems No.144/1,Ramakrishna Avenue, Easwaran Koil street,
Industrial Modbus I/O Modules
Industrial Modbus I/O Modules Modbus I/O Modules Introduction & Features Digital Input / Output Modules Analog Input / Output Modules Modbus I/O Modules The Best Choice For Your SCADA Applications Introduction
DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification
01 May 20 30-10-10--EN Page 1 of DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of
B850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
DIGITAL PROGRAM CONTROLLER
KP1000 SERIES DIGITAL PROGRAM CONTROLLER The KP1000 series is a 96x96mm digital program controller with the indicating accuracy of ±0.1%, the control cycle of approximately 0.1 seconds and maximum 19 program
DC1010/DC1020/DC1030/DC1040
05/0 0-10-10-0-EN Page 1 of DC1010/DC1020/DC100/DC1040 DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and
MINI 048 / JUN 2003 PAGE 1. Temperature I/O Module HE500OCS048 / HE500OCS078 HE500RCS078
MINI 048 / 078 07 JUN 2003 PAGE 1 Temperature I/O Module HE500OCS048 / HE500OCS078 HE500RCS078 Mini OCS/RCS 1 SPECIFICATIONS Relay Outputs Number of Channels 2 N.O. Relays Maximum Load Current (resistive)
OP2 OP1 LSP1 RESET. LIMIT L91 Microprocessor Based Limit Controller
User's Manual LIMIT FDC-L OP OP C F PV HSP LSP SP LOCK RESET LIMIT L Microprocessor Based Limit Controller Warning Symbol This Symbol calls attention to an operating procedure, practice, or the like, which,
AK48 SPECIFICATIONS APPLICATIONS GENERALS FEATURES. 1/16 DIN Process controller
/6 DIN Process controller AK48 Three control types The user can select among three different control actions: ON/OFF, PID or PID ( PI with automatic derivative action). PID and PID include two differente
MICRO-CONTROLLER X (96 96 mm)
PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature
MC-2 Series Micro Processor Temperature Controller
MC-2 Series Micro Processor Temperature Controller Application Plastic, rubber, equipment Injection molding machinery Extruding machinery Mold temperature controllers Vacuum forming Blow molding (Thermo
NetBiter I/O Extender 4RO 6RTD 8DIO - DAIO User Manual Revision 1.00
NetBiter I/O Extender 4RO 6RTD 8DIO DAIO User Manual Revision 1.00 IntelliCom Innovation AB Linjegatan 3D SE302 50 Halmstad SWEDEN Phone +46 35 18 21 70 Fax +46 35 18 21 99 email info@intellicom.se www
General Information SANUP ELECTRIC CO. PRODUCTS. Since 1963 APPROVAL
Since 1963 General Information SANUP ELECTRIC CO. Sanup Electric Co., Ltd. is a temperature control industry leader in advanced technology, announced that it has commenced production of the industries
MICRO-CONTROLLER X (48 96 mm)
PX series digital temperature controller MICRO-CONTROLLER X ( mm) DATA SHEET PXG PXG is a compact size temperature controller of front panel size mm. To cope with any of versatile uses as a temperature
TSC. Transtech Signal Conditioners. Galvanic Isolation as Standard Full Input Range Field Adjustable 0.1% Accuracy Dual Rail Mounting.
TSC Transtech Signal Conditioners Industrial AUSTRALIAN DESIGNED AND MANUFACTURED Process Galvanic Isolation as Standard Full Input Range Field Adjustable 0.1% Accuracy Dual Rail Mounting Mining Dec 2005
Advanced Ladder Logic Full IEC Languages 25A for <1 24 VDC DC Switched
EXL6 OCS Datasheet for HE- EXL1E0, HE- EXL1E2, HE- EXL1E3, HE- EXL1E4, HE- EXL1E5, HE- EXL1E6 HEXT371C100, HEXT371C112, HEXT371C113, HEXT371C114, HEXT371C115, HEXT371C116 1. Specifications Required Power
SHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
B850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PROCESS CONTROLLERS. Table of Contents and Type Numbers
Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff of engineering, manufacturing
7SD/7SH/7SM Temperature Controllers
7SD/7SH/7SM Temperature ADVANTAGE EZ Series 7SD, 7SH, 7SM 1/16 DIN Temperature 3Digit LED Display Thermocouple and RTD Input Autotuning NEMA 4X Field onfigurable 100 to 40 Vac Switching Power Supply Programmable
Model Number Structure
Digital Controller CSM DS_E_3_1 Advanced Digital Controllers Ideal for Worldwide Use Modular structure High-accuracy: 100 ms sampling (for analog input) Auto-tuning and fuzzy self-tuning Conforms to international
RISH EM 3490 DS Dual Source Energy Meter (With All Display Parameters) RISH EM 3490 DS. Application : Product Features:
(With All Display Parameters) Application : RISH EM 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network
PID500 FULL FEATURED PID TEMPERATURE CONTROLLERS
PID500 FULL FEATURED PID TEMPERATURE CONTROLLERS DESCRIPTION FEATURES * Compact Size: 1/16 DIN * Dual LED displays for simultaneous indication of process temperature and set point (Lower display selectable
Table of Contents Panel Mount Controllers Analog Series C-Series Controller Software Legacy Series Power Controllers Analog Series P-Series
Table of Contents Panel Mount Controllers C-Series C-Series 32C...4-5 C-Series 16C...6-7 C-Series 18C and 19C...8-9 C-Series 25C...10-11 C-Series OTC25...12-13 C-Series OTC25 Limit... 14 Legacy Series
BATCHMATE 1500 Batch Control Computer Technical Bulletin
TS-5(C) BATCHMATE 5 Batch Control Computer Technical Bulletin DESCRIPTION The BATCHMATE features an 8 digit.55-in. alphanumeric LED display. The pulse input model will accept up to 2, pulses per second
R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
FC-33, DC SELECTABLE SIGNAL CONDITIONER
FC-33, DC SELECTABLE SIGNAL CONDITIONER Description. The FC-33 is a DIN rail or side mount, selectable input/output signal conditioner with 1500VDC isolation between input and output, and 1500VDC isolation
SPECIFICATIONS. Superluminous SunBright display Readable from 100 feet away
PD2-6000 Helios Process Meter 0-20 ma, 4-20 ma; ±10 VDC (0-5, 1-5, 0-10 V); Modbus PV (slave) Dual-scale for applications 32-point, square root, exponential, or round horizontal tank linearization Tare
Series 1700 PX. Selection Guide. Threshold relays. Process signal converters/isolators. Temperature converters
Selection Guide Threshold relays Process signal converters/isolators Temperature converters Process signal to pulse frequency converters/isolators Pulse frequency to process signal converters/isolators
AI-700 / 500 INTELLIGENT INDICATING/ALARMING INSTRUMENT. Operation Instruction
AI-700 / 500 INTELLIGENT INDICATING/ALARMING INSTRUMENT Operation Instruction CONTENTS Page MAIN FEATURES... 2 ORDERING CODE.3 TECHNICAL SPECIFICATION.5 FRONT PANEL AND OPERATION..7 PARAMETER AND SETTING...
- SMART TUNE - PID CONTROL - UNIVERSAL, 3 WIRE - TC, RTD AND LINEAR INPUT - 2 INDEPENDENT SET POINT RAMP UP/ DOWN PROFILES - SERVO VALVE POSITIONER
MULTI - FUNTION ONTROLLERS - SMART TUNE - PID ONTROL - UNIVERSAL, 3 WIRE - T, RTD AND LINEAR INPUT - 2 INDEPENDENT SET POINT RAMP UP/ DOWN PROFILES - SERVO VALVE POSITIONER WITH POTENTIOMETER FEEDBAK -
269 Troubleshooting Guide 11/4/98 1
269 Troubleshooting Guide 11/4/98 1 Table of Contents Phase currents 3 Communications. 6 RTDs.. 9 Ground Fault Currents... 13 Output Relays. 15 Analog Output 17 Switch Inputs...18 11/4/98 2 Phase Currents
INSTRUCTION MANUAL PLUG AND SEND WIRELESS MONITOR SYSTEM TABLE OF CONTENTS
DEVAR Inc. 706 Bostwick Ave., Bridgeport CT 06605 Tel 203 368 6751 Fax 203 368 3747 http://www.devarinc.com e-mail: info@devarinc.com INSTRUCTION MANUAL PLUG AND SEND WIRELESS MONITOR SYSTEM TABLE OF CONTENTS
General Purpose Digital Controllers Specifications
General Purpose Digital Controllers Specifications DC1010 - DC1020 - DC1030 - DC1040 51-52-03-33 August 2003 Overview The DC1000 family of microprocessor based controllers combines a high degree of functionality
F-SERIES FOR. Indicators Totalizers Transmitters Flow computers Batch controllers Monitors. Flow Level Pressure Temperature
F-SERIES Indicators Totalizers Transmitters Flow computers Batch controllers Monitors Flow Level Pressure Temperature FOR F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F - SERIES F
Non-Submersible Industrial Pressure Transducer
Non-Submersible Industrial Pressure Transducer KPSI Transducers Series 27, 28, 30 FEATURES Custom Pressure Ranges up to 2000 (13,790 kpa) Accuracy to ±0.10% FS Analog Outputs of 4-20 ma or VDC Welded 316
Hawk 3 Digital Panel Meter / Controller
File # E199939 All parameters set from easy to understand front panel access One, two or four 5-amp relays optional Five user-selectable brightness levels 1/8 DIN, shallow depth case, 3.24 RS485 digital
DPF-MAC Auto power factor controller
Digital Electric& Electronics System DPF-MAC Auto power factor controller MULTI POWER FACTOR AUTOMATIC MULTI POWER FACTOR AUTOMATIC Introduction DPF-MAC increases usage efficiency by controlling the power
Process controller Setpoint programmer 1/16 DIN - 48 x 48 mm gammadue series M5 line
BT. 2.9 M/E Process controller programmer /6 DIN - 48 x 48 mm gammadue series M line Advanced features, customizable and process adaptable High speed data aquisition and signal management. Efficent information
USER S MANUAL. Manual for Panel Mount Process Indicator. HTA INSTRUMENTATION (P) LTD. Your One Stop for Instrumentation, Calibration & Service
Member of SN Registrars (Holdings) Ltd 8327 USER S MANUAL Manual for Panel Mount Process Indicator EQ-DS8B-IRRB EQ-DS8B-IRRB HTA INSTRUMENTATION (P) LTD. Your One Stop for Instrumentation, Calibration
ADAM 4000/4100 Series
ADAM 4000/4100 Series Common Dimensions Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication
LIMIT CONTROL L91 Microprocessor Based Limit Controller
User's Manual DIN EN ISO 9001 Certificate: 01 100 98505 R R APPROVED LIMIT CONTROL L91 Microprocessor Based Limit Controller UM0L911C BRAINCHILD Warning Symbol The Symbol calls attention to an operating
PROMUX Distributed MODBUS I/O Modules Catalog and Design Guide
PROMUX Distributed MODBUS I/O Modules Catalog and Design Guide 14/11/2006 V10 P.O.Box 24 Stanfield 3613 SOUTH AFRICA Tel: +27 (031) 7028033 Fax: +27 (031) 7028041 Email: proconel@proconel.com Web: www.proconel.com
Paperless Recorder PR20
Technical Information TI 075R/24/ae Paperless Recorder PR20 Economical and time saving recorder operates without the need for paper or pens and is exceedingly simple to operate Application Areas Technological
RISH EM 3490 SS Kilowatt Hour Energy Meter With Rs485 RISH EM 3490 SS. Application : Product Features: Indication: Pulse Indication:
Application : RISH Master 3490 SS is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy having auto-resetting 8 digit seven segment LED counter. The unit
ONEXIS AUTOMATIONS PVT LTD B-8, First Floor, Industrial Area, Sector - 64, NOIDA , U.P, India Ph:
X A L I S XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide display and signals transmission solutions. XALIS disign allows exceptional performances
Product Discontinuation Notices
PRODUCT NEWS Product Discontinuation Notices Temperature Controllers Issue Date March 2, 2015 No. 2015E005C Discontinuation Notice of E5AZ-series. (For China area only) Product Discontinuation Digital
Application: Product Features: On site programmable PT/CT ratios: User selectable CT Secondary 5A/1A. User selectable PT Secondary
Application: Rish Master 3440 measures important electrical parameters in 3 phase and single phase etwor & replaces the multiple analog panel meters. t measures electrical parameters lie AC current,, frequency,
APPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
CompoBus/D-type Digital Controller
CompoBus/D-type Digital Controller Digital Controller for the CompoBus/D and Conforming the DeviceNet Conforms the DeviceNet and connects a Programmable Controller without any programming. High performance
FDC-9300 Self-Tune Fuzzy / PID Process / Temperature Controller
User's Manual FDC- Self-Tune Fuzzy / PID Process / Temperature Controller CONTENTS Page No Chapter Overview - Features ------------------------------------------------------------------------- - Ordering
NEW. MODEL ACL Pat. Pend. WORLD'S FIRST POWERLESS TM A.C. LOOP TRANSMITTER, CONTROLLER FOR: VOLTS-AMPS-WATTS-HERTZ
NEW WORLD'S FIRST POWERLESS TM A.C. LOOP TRANSMITTER, CONTROLLER FOR: VOLTS-AMPS-WATTS-HERTZ MODEL ACL Pat. Pend. FEATURES: Powered By Your P.T. or C.T.! No Power Supply Required Only 2 Wires to Connect
Recorder Products Catalog
Recorder Products Catalog The Partlow Brand Welcome to the Partlow Brand of circular chart recorders. The Partlow Brand has been synonymous with rugged, quality built process recording and controlling
Digital Multifunction Instrument - Rish Master 3440
Application Rish Master 3440 measures important electrical parameters in 3 phase and single phase etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC current,
Condition Monitoring Custom Products
CMCP500 Series Transmitters/Monitors Low Cost Din rail mount 4-20 ma output Sensor fault detection Buffered transducer output Optional filters Alert, Danger & OK Alarms and Relays Trip Multiply Remote
Economical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
Absolute Process Instruments
Strain Gauge, Load Cell, Bridge Current Switches and Transmitters Amplify, alarm strain gauge sensor signals Economical sensors for current out-of range alarms or monitoring current levels APD 1520 APD
Delta Temperature Controller DT Series
Automation for a Changing World Delta Temperature Controller DT Series www.deltaww.com Features Many Sizes Available: From 48x24 mm to 96x96 mm, all panel sizes comply with international standards Quality
1/8 DIN BAR-DIGITAL METER/CONTROLLER *AUTOMATIC TRICOLOR BAR *RELAYS/DAC/SERIAL *NUCLEAR *MIL-SPEC * INDUSTRIAL GRADES
TO BE DISCONTINUED /06. FOR REPLACEMENT, CLICK NTM0 or NTMB NEW /8 DIN BARDIGITAL METER/CONTROLLER *AUTOMATIC TRICOLOR BAR *RELAYS/DAC/SERIAL *NUCLEAR *MILSPEC * INDUSTRIAL GRADES MODEL BDM FEATURES: Proven
T E L I S T E L I S reinvents conversion and transmission of measures
T E L I S 9000 T E L I S reinvents conversion and transmission of measures Its graphic screen display, and its joystick make user-frendly and easily programmable device. Its USB front face plug enables
AI-501 INTELLIGENT INDICATING/ALARMING INSTRUMENT. Operation Instruction
AI-501 INTELLIGENT INDICATING/ALARMING INSTRUMENT Operation Instruction CONTENTS Page MAIN FEATURES... 2 ORDERING CODE.3 TECHNICAL SPECIFICATION.5 FRONT PANEL AND OPERATION..6 PARAMETER AND SETTING...
Temperature Controller
Temperature Controller 1/8 IN - 48 x 96mm Platinum Series X400 Line Cost Effective Solutions This 48x96mm size controller of the Platinum Series, provides a high degree of functionality and reliability
PROMUX Distributed MODBUS I/O Modules Catalog and Design Guide
PROMUX Distributed MODBUS I/O Modules Catalog and Design Guide 12/03/2012 V11.0 P.O.Box 164 Seven Hills 1730 NSW AUSTRALIA Tel: +61 2 96248376 Fax: +61 2 9620 8709 Email: proconel@proconel.com Web: www.proconel.com
MODEL PAX 1/8 DIN ANALOG INPUT PANEL METERS
Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net Bulletin No. PAX-P Drawing No. LP0545 Released 01/15 MODEL PAX 1/8 DIN ANALOG PANEL METERS PROCESS, VOLTAGE, CURRENT, TEMPERATURE, AND STRAIN
K3P ENG.qxd 23/10/ Pagina 1
K3P ENG.qxd 23/10/2003 12.30 Pagina 1 - CLEAR PROGRAM STATUS DISPLAY - DIRECT PROGRAM PARAMETER ADJUSTMENT - 8 INDEPENDENT PROGRAMS - 10 SEGMENTS FOR EACH PROGRAM - "SET - POINT TRACKING " AND "GUARANTEED
1 INTRODUCTION ORDER CODE / INFORMATION
INTRODUCTION ORDER CODE / INFORMATION 269/269Plus * * * * * * 269/269Plus SV D/O.4 ORDER CODE / INFORMATION Motor management relay Standard version Drawout version Phase CT Ground CT (required for D/O
NEW NEW OMX 380. Programmable isolated transmitters Measuring rate - up to measur./s Teach-in Output: 4 20 ma/0 10 V Power supply VDC
54 OMX 380 Programmable isolated transmitters Measuring rate up to 7 500 measur./s Teachin Output: 4 20 ma/0 10 V Power supply 18 30 VDC xcitation Data output Power supply 10 30 VDC, isolated OMX 380PM
PROGRAMMABLE CONTROLLER
SERIES FP21 High Accuracy ±0.1% Programmable 9 Patterns and 9 Steps (81 Steps Max.) Auto-Tuning PID RA / DA Selectable User-Selectable Inputs (Thermocouple) User-Selectable Ranges Programmable Scaling
PANEL MOUNT PROCESS METER IDP
NEWPORT PRODUCT INFO MANUAL (HTML) - PDF Version QUICK START MECHANICAL PRICE REQUIRES ADOBE ACROBAT - HELP PANEL MOUNT PROCESS METER IDP Very easy scaling Easily Scaled in Any Engineering Unit from -1999
Analogue temperature controllers
Analogue temperature controllers CT8A Input by J-K thermo-couple or by thermo-resistance Pt 00 (-wire) regulation modes : ON/OFF or proportional derivative selected by wiring Relay output Specifications
ORDERING INFORMATION T79D
Action Instruments Isolating Two-Wire Transmitter Isolated, Linearized Current Loop Output for an RTD or Thermocouple Input HART Compatible or Field Configurable with Optional Display Intrinsically Safe
Process and Temperature Controllers
Process and Temperature Controllers www.durexindustries.com Input Input Input break action Input short action Sampling time Influence of external resistance Influence of lead resistance PV bias Input
SECTION 16483D ADJUSTABLE FREQUENCY DRIVE - MICRODRIVE (MVX <10-HP)
ADJUSTABLE FREQUENCY DRIVE - MICRODRIVE (MVX
DOCUMENTATION. The new XALIS 9000 integrates a 32 bits microprocessor offering some more of performance.
DOCUMENTATION The new integrates a 32 bits microprocessor offering some more of performance. XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide
VELTRON II Microprocessor Based Pressure & Flow Smart
VELTRON II Microprocessor Based Pressure & Flow Smart Transmitter Accurate airflow measurement for demanding applications Precision Airflow Measurement An ONICON Brand VELTRON II with Automatic Zeroing
Order number 031-1BB BB BB BD30 Figure. SM 031, AI 2x12Bit I. Note - - Coming soon - Features. 2 inputs, Current 0(4)...
System SLIO nalog input modules Order number Figure Type SM 0, xbit U General information SM 0, xbit I SM 0, xbit TC SM 0, xbit U Note - - Coming soon - Features outputs, inputs, inputs, inputs, oltage
DIN rail mounting temperature controller with current transformer input deltadue series D1 line
BT.. D/E S E R I E S DIN rail mounting temperature controller with current transformer input deltadue series D line The controller with load control The deltadue series includes a powerful DIN rail mounting
DRG-SC Series Signal Conditioners
DRG-SC Series Signal Conditioners DRG-SC Series 245 Basic unit Models Available for Thermocouples, RTDs, DC Voltage and Current, Frequency, Strain Gage Bridge, AC Voltage and Current Field Configurable
Technical Data Sheet. x1000. kwh R Y B
Technical Data Sheet x1000 Von kwh IRev 3600 imp /kwh R Y B is a compact multifunction instrument which is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy
Energy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
ISOLATED 4-20 ma TRANSMITTERS
500 SERIES FOR DEMANDING APPLICATIONS Isolated to 1500 V rms Two-Wire 4-20 ma Operation 9-50 V Compliance Turndown Ratio to 10:1 NMV Protection to 120 Vac -40 to +85 C (-40 to 185 F) Operation Shock Resistance