XL... easy mounting - concretin
|
|
|
- James Townsend
- 5 years ago
- Views:
Transcription
1 Neaver again doing a jigsaw puzzle XL... easy mounting - concretin Do you spend? hours looking for components time on price calculations time on complicated planning time on costly mounting in production To put it in a nutshell doing a jigsaw puzzle! IBTronic XL automatically puts the jigsaw puzzle together. IBTronic XL offers an economic and lowpriced solution with integrated accessory parts! IBTronic XL = Many requirements one part 2
2 IBTRONIC XL g - installing! Applications The new IBTronic XL enclosure system offers versatile opportunities to integrate NV/HV/LED luminaries and loudspeakers in prefabricated ceilings in a simple way. Application to site cast is also possible. 3
3 IBTronic XL H 185 for applications in component factories IBTronic XL H 185 Universal installation housing for applications in pre cast ceiling factories for mounting of NV / HV / LEDluminaires and loudspeakers Plasterboard with tolerance compensation Ø 185 mm Outlet aperture: variable up max. 150 mm Housing up max. 150 VA Volume 4.5 litre Simplified installation of transformer due to short cable runs Simple alignment due to marking of the centre of cover and enclosure 4 stainless steel clamps used to give stability and safety, plasterboard can be used throughout Problem-free retrieving after plastering thanks to plaster mark Pilable: - Minimal Stock - Protection of plasterboard 4
4 IBTRONIC XL H 185 Light installation Drilling ceiling outlet up to Ø 150 mm with the Spelsberg Profi Hole cutter Transformer installation up max. 150 VA For the installation of VDE approved luminaires according to DIN EN and with or marking, power luminaire max. 50 W. Introducing a flexible system 8 integrated conduit entries for rigid and corrugated conduits (4 x M20, 4 x M25) (4 x M16, 4 x M19) Integral conduit stopper and strain relief Simplified power supply and throughwiring Knockout membrane in-feeds Conduit entries above the prefabricated ceiling 5
5 IBTronic XL Drillbox for later installation of prefabricated plates 6 Light installation Carry out positioning of light by means of centre hole, make core hole drilling with Ø 82 mm from above into the prefabricated ceiling. Fix enclosure on the prefabricated ceiling and carry out piping Transformer installation up max. 150 VA comfortably due to the Ø 82 mm core hole For the installation of VDE approved luminaires according to DIN EN and with or marking
6 IBTRONIC XL DRILLBOX IBTronic XL Drillbox Universal installation housing for easy mounting in prefabricated ceilings mm thick. Cost-intensive plastering up is a thing of the past. For the installation of NV / HV / LEDluminaires For counter hole drilling Ø 82 mm Simplified light installation by means of light adaptor for low-voltage and high-voltage lamps Power luminaire max. 50 W The 2-part light adapter can easily compensate ceiling thickness of mm without any problem. The ceiling aperture is 76 mm, the outer ring diameter must be at least 85 mm. The retaining springs are locked in the light adapter. The light unit is mounted until the cover ring of the lamp is flush. Introducing a flexible system 8 integrated conduit entries for rigid and corrugated conduits (4 x M20, 4 x M25) (4 x M16, 4 x M19) Integral conduit stopper and strain relief Simplified power supply and throughwiring Knockout membrane in-feeds Conduit entries above the prefabricated ceiling 7
7 Stable... as concrete IBTronic enclosures with outlet aperture 2-way receptable offer sufficient space for installation of rail mounted devices (standard rail is required, order n : ) Retrospective extension of the installed height possible on the building site Simple assembly in site concrete ceilings and walls and prefabricated components Integrated conduit stoppers prevents the conduits from being pushed right through 8 Compatible with the tried and tested support spar technique (Support spar technique = wall thickness less 1 cm)
8 IBTRONIC Easy wall mounting with tried and tested support spar technique (supporting spar length=wall thickness minimum 1 cm) Application as back mounted box with minimum wall thickness of 240 mm IBTronic IBTronic-TT 2-way 1-way 1-way receptacle: Enables the use of numerous standard flush-mounted devices, e.g. sockets and switches. 2-way receptacle: Enables the use of numerous standard flush-mounted devices, e.g. sockets and switches. Ceiling outlet: Ø 68 mm Ø 68 mm Typical installation dimensions of numerous NV luminaires Fermacell Ø 108/120 mm Ø 108 / 120 mm According to the requirements this option can be opened in two sizes: - Ø 108 mm The connecting elements between the 18 mm and 120 mm aperture are simple separated with a knife. Then, the 108 mm aperture can simply be knocked out with a hammer. - Ø 120 mm: This aperture can directly be carried out with the hole cutter (order n ). IBTronic makes it possible to integrate halogen lighting, loudspeakers and LED lights, as well as high-quality electronic components into concrete ceilings in a convenient and elegant IBTronic-TT with additional connection space for the installation of electronic safety transformers Plasterboard The universal outlet, variable up to Ø 100 mm. The required installation aperture is defined on the site. For this purpose, the required section is simply cut directly in the plasterboard by means of an adequate hole cutter. manner. 9
9 IBTronic XL 255 x 280 x 130 mm for installation into prefabricated ceilings Description Order No. Packing Qty Universal installation enclosure with additional space for connection e.g. for the installation of a safety transformer (*) for pre-cast concrete structures, halogen-free, for mounting of NV / HV / LED-luminaires (*1) and loudspeakers. Suitable for adhesive and nail fixing. IBTronic XL H 185 Outlet aperture: Plasterboard, variable up to Ø 150, 8 Combi conduit entries 4 x M20,4 x M25, integrated conduit stoppers for conduits M20, M / 1 IBTronic XL H 185 E Outlet aperture: Plasterboard, variable up to Ø 150, 8 Combi conduit entries 4 x M16, 4 x M19, integrated conduit stoppers for conduits M16, M / 1 (*) Electronic transformers up to max. 150 W (e.g. Osram Halotronic HTM 150 Mouse). (*1) For the installation of VDE approved luminaires according to EIN EN (VDE 0711) and with or marking. Max. installation height NV-luminaires: 105 mm, HV-luminaires: 110 mm, max. power luminaire 50 W. IBTronic XL Drillbox 255 x 280 x 92 mm for installation into prefabricated ceilings Universal installation enclosure with additional space for connection (e.g. for the installation of a safety transformer (*) for pre-cast concrete structures, halogen-free, for mounting of NV / HV / LED-luminaires (*1). Suitable for later installation into prefabricated ceilings from 45-70mm by means of Ø 82 mm core drilling. IBTronic XL Drillbox Outlet aperture Ø 76 mm, ORD (Outer Ring Diameter) min. Ø 85 mm. Combi conduit entries 4 x M20,4 x M25, integrated conduit stoppers for conduits M20, M / 1 IBTronic XL Drillbox E Outlet aperture Ø 76 mm, ORD (Outer Ring Diameter) min. Ø 85 mm. Combi conduit entries 4 x M16,4 x M19, integrated conduit stoppers for conduits M16, M / 1 (*) Electronic transformers up to max. 150 W (e.g. Osram Halotronic HTM 150 Mouse). (*1) For the installation of VDE approved luminaires according to EIN EN (VDE 0711) and with or marking. Max. installation height NV-luminaires: 105 mm, HV-luminaires: 110 mm, max. power luminaire 50 W. IBTronic 150 x 150 x 106 mm Installation in ceilings from a ceiling thickness of 140 mm (Wall installation with IBT-Support spars) Universal installation enclosure for site cast or pre-cast concrete structures for mounting of NV / HV / LED-luminaires (*) and loudspeakerssuitable for adhesive fixing and opposing shuttering. IBTronic H120-S1 Outlet aperture: 1-way receptacle / 1 IBTronic H120-S2 Outlet aperture: 2-way receptacle / 1 IBTronic H Outlet aperture: Ø 68 mm / 1 IBTronic H120-0 Outlet aperture optional: Ø 108/120 mm / 1 Entries: 4 x up to 34 mm Ø Integrated conduit stopper for M25, M32 IBTronic H120-P Outlet aperture: Plasterboard, / 1 variable up to Ø 100 mm (*) For the installation of VDE approved luminaires according to EIN EN (VDE 0711) and with or marking. Max. installation height NV-luminaires: 75 mm, HV-luminaires: 80 mm, max. power luminaire 50 W 10
10 IBTRONIC IBTronic 150 x 150 x 151 mm Installation in ceilings from a ceiling thickness of 180 mm (Wall installation with IBT-Support spars) Entries: 8 x up to 34 mm Ø Integrated conduit stopper for M25, M32 IBTronic-TT 150 x 306 x 106 mm Installation in ceilings from a ceiling thickness of 140 mm (Wall installation with IBT-Support spars) Description Order No. Packing Qty Universal installation housing for site cast concrete or pre-cast concrete structure, for the installation of NV/HV/LED-luminaires (*) and loudspeakers. Suitable for adhesive fixing and opposing shuttering. IBTronic H120-S1-S2 Outlet aperture optional: 1-way or 2-way receptacle / 1 IBTronic H120-S1-0 Outlet aperture optional: 1-way receptacle or Ø 108/120 mm / 1 IBTronic H Outlet aperture optional: Ø 68 mm or Ø 108/120 mm / 1 IBTronic H120-P-0 Outlet aperture optional: Plasterboard, variable up to Ø 100 mm or Ø 108/120 mm / 1 (*) For the installation of VDE approved luminaires according to EIN EN (VDE 0711) and with or marking. Max. installation height NV-luminaires: 120 mm, HV-luminaires: 125 mm, max. power luminaire 50 W. Universal installation housing with separate Space for connection (e.g. for the installation of a safety transformer (*) for site cast or pre-cast concrete structures, for mounting of NV / HV / LED-luminaires (*1) and loudspeakers. Suitable for adhesive fixing and opposing shuttering. IBTronic H120TT-S1 Outlet aperture: 1-way receptacle / 1 IBTronic H120TT-S2 Outlet aperture: 2-way receptacle / 1 IBTronic H120TT-68 Outlet aperture: Ø 68 mm / 1 IBTronic H120TT-0 Outlet aperture: Ø 108/120 mm / 1 IBTronic H120TT-P Outlet aperture: Plasterboard, / 1 variable up to Ø 100 mm Entries: 6 x up to 34 mm Ø Integrated conduit stopper for M25, M32 IBTronic-TT 150 x 306 x 151 mm Installation in ceilings from a ceiling thickness of 180 mm (Wall installation with IBT-Support spars) Entries: 10 x up to 34 mm Ø Integrated conduit stopper for M25, M32 (*) Electronic transformers up to max. 150 W (e.g. OSRAM HALOTRONIC HTM 150 Mouse). (*1) For the installation of VDE approved luminaires according to EIN EN (VDE 0711) and with or marking. Max. installation height NV-luminaires: 75 mm, HV-luminaires: 80 mm, max. power luminaire 50 W. Universal installation housing with separate Space for connection (e.g. for the installation of a safety transformer (*) for site cast or pre-cast concrete structures, for mounting of NV / HV / LED-luminaires (*1) and loudspeakers. Suitable for adhesive fixing and opposing shuttering. IBTronic-TT H120TT-S1-0 Outlet aperture: 1-way receptacle / 1 IBTronic-TT H120TT-S2-0 Outlet aperture: 2-way receptacle / 1 IBTronic-TT H120TT-68-0 Outlet aperture: Ø 68 mm / 1 IBTronic-TT H120TT-0-0 Outlet aperture: Ø 108/120 mm / 1 IBTronic-TT H120TT-P-0 Outlet aperture: plasterboard, / 1 variable up to Ø 100 mm (*) Electronic transformers up to max. 150 W (e.g. OSRAM HALOTRONIC HTM 150 Mouse). (*1) For the installation of VDE approved luminaires according to EIN EN (VDE 0711) and with or marking. Max. installation height NV-luminaires: 120 mm, HV-luminaires: 125 mm, max. power luminaire 50 W 11
11 Accessories Description Order No. Packing Qty Recommended accessories K0 K15 BL, blank cleat for opposing formwork / 1 2 off required per installation box NS 35-90, standard rail 35 mm / 1 for retrospective installation into IBTronic H120-S2 (Order n and ) Support spars for fixing the IBTronic housing in opposing formwork. Always used in conjunction with blank cleat AS. Supporting spar length = wall thickness minimum 1 cm Wall thickness Spar length STH 13, 14 cm 13 cm / 50 STH 14, 15 cm 14 cm / 50 STH 15, 16 cm 15 cm / 50 STH 17, 18 cm 17 cm / 50 STH 19, 20 cm 19 cm / 50 STH 23, 24 cm 23 cm / 50 STH 24, 25 cm 24 cm / 50 STH 29, 30 cm 29 cm / 50 FPD 120 plasterboard / 1 for retrospective installation into IBTronic H120-P (Order n , , and ) HW LFR-120, hole cutter, Ø 120 mm / 1 Günther Spelsberg GmbH + Co. KG Headquarter Im Gewerbepark 1, D Schalksmühle P.O. Box 15 20, D Schalksmühle T: +49 (0) / F: +49 (0) / info@spelsberg.de VK Branch office Vor dem Lohe 3, D Buttstädt P.O. Box 30, D Buttstädt T: +49 (0) / F: +49 (0) /
12 Stable...as concrete
OptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
CHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
Cable Management Solutions with DLP TM
DLP trunking system P. 374-375 Selection chart for DLP trunking system P. 397 Floor boxes & Under floor boxes Technical data P. 373 DLP U-PVC adaptable trunking system Cable Management Solutions with DLP
Cabtite Cable entry system. Cable entries and Cabtite
Cabtite Cable entry system Do you really need a plug-in connector on the outside of your switchgear cabinet? Or do you simply just want to make the right connections? Now you can save space, time and money
ASSEMBLY INSTRUCTIONS. Construction type approved Reg. no S819 F ENERGY AND SANITARY SYSTEMS
Heliostar 252 S4 and 218 S4 FREE-STANDING INSTALLATION vertical ASSEMBLY INSTRUCTIONS Construction type approved Reg. no. 011-7S819 F ENERGY AND SANITARY SYSTEMS Safety instructions Safety instructions
PUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
² TL Beton-StB 07 = German technical conditions for construction materials for concrete road pavements
Introduction A transverse joint frequently crossed by heavy goods traffic tends to form steps if it not perfectly doweled. This is associated with negative effects on ride comfort and driving safety as
STATE WHEN ORDERING HI =...
STATE WHEN ORDERING HI =... mm Surface treatment of outer walls and night closing doors Stainless steel cladding Special anodized... RAL... Special powder coating...... Surface treatment of door leaves
CMS 603DC. Technical Data Sheet
CMS 63DC Product description The Tannoy CMS 63DC is a full bandwidth, high power-handling and high sensitivity loudspeaker built around CMS 3. the third generation of Tannoy s revolutionary Ceiling Monitor
CMS 803DC. Technical Data Sheet
CMS 83DC Product description The Tannoy CMS 83DC is a full bandwidth, high power-handling and high sensitivity loudspeaker built around CMS 3. the third generation of Tannoy s revolutionary Ceiling Monitor
J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi
![J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi](/thumbs/85/92217343.jpg "J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi")
INdex ZERTIFIZIERT 4 INTERIOR DOOR SIMONSWERK TECTUS TE 210 3D for unrebated and rebated, flush-faced quality doors Hinge up to 40 kg Technical Data Load capacity Length (leaf/frame) Width (leaf/frame)
Outdoor Enclosure. VIVOTEK Pan/Tilt & Fixed Dome Series. Installation Guide
VIVOTEK Pan/Tilt & Fixed Dome Series Outdoor Enclosure Using AE-131/-132 Outdoor Enclosure, AE-151 Outdoor Enclosure, AM-114 Pendant Head (outdoor), AM-116 and AM-117 Pendant Pipes, AM-221 Gooseneck, AM-212
Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009)
Privacy Wall & Glass Selections Pivot-Hinged Door (For products manufactured after September 14, 2009) 3/16" HEX BIT #2 ACR BIT 3/8" HEX SOCKET Full-Height (No Switch) Transom (No Switch) Full-Height (With
CMS 603DC PI. Technical Data Sheet
CMS 63DC PI Product description The Tannoy CMS 63DC PI is a full bandwidth, high power-handling and high sensitivity loudspeaker built around CMS 3. the third generation of Tannoy s revolutionary Ceiling
On-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
LED linear trunking lights are available in suspended, surface-mounted and recessed versions. Its very easy to mount the linear
Suspension Installation LED linear trunking lights are available in suspended, surface-mounted and recessed versions. Its very easy to mount the linear system by hand without tools, save both time and
Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
CMS601 DC. Product Description. Features. Applications
CMS601 DC GRILLE FITTED CMS601 DC PI CMS601 DC BM Product Description The Tannoy CMS601 DC is a full bandwidth; high power and high sensitivity ceiling monitor system. The 165mm (6.50") Tannoy Dual Concentric
A q u a r i u s 3 5 M e d i u m a n d A q u a r i u s 3 5 W i d e
Pool 35 Focus and Pool 35 Wide User Manual A q u a r i u s 3 5 M e d i u m a n d A q u a r i u s 3 5 W i d e User Manual This manual describes the following products: Product numbers 033 0750 and 033 0755.
Folding-Arm Cassette Awning markilux 6000
Folding-Arm Cassette Awning markilux 6000 Fitting Instructions 1. Fitting the mounting fixtures 1.1 Fitting height H = Projection Y = Horizontal cover X = Value from Table 2 K = Headroom = G X G = Fitting
Tree protection systems 2.0
r e z t ü h c s m u Die Ba Tree protection systems 2.0 Installation and assembly instructions 2 General information The installation instructions below are merely a recommendation for how to install the
MevaDec. Contents. Ref. No. Description / Application Product m² list kg
Ref. No. Description / Application Product m² list kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list.
Wall-mount Bracket. VIVOTEK Fixed Dome & PTZ Series. Installation Guide. IP Sur veillance. Using AM-215 wall-mount bracket and compatible accessories
VIVOTEK Fixed Dome & PTZ Series Wall-mount Bracket Installation Guide Using AM-215 wall-mount bracket and compatible accessories Corresponding part numbers: AM-215: 909004300G (v01) 909004301G (v02) Rev.
Solutions. Installation Instructions. Ref Description Illustration Qty. A Shower Tray* mm Radius Curved Panel* Universal. Curved Quad Panel*
Solutions Parts Supplied Installation Instructions Ref Description Illustration ty Shower Tray* *Shape of tray may vary from illustration B 550mm Radius Curved Panel* *If your tray is uadrant you will
Adjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
Quarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
BURRI public elements AG BURRI public elements Deutschland GmbH
BURRI public elements AG www.burri.world CH-8152 Glattbrugg T +41 44 874 44 22 office-ch@burri.world BURRI public elements Deutschland GmbH D-41066 Mönchengladbach T +49 21 61 400 72 40 office-de@burri.world
Zero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
1.2 Overview. Self-adhesive mounting bases and clamps for screw and rivet mounting. Typical applications
1.2 Overview Self-adhesive mounting bases and clamps for screw and rivet mounting The main difference between a mounting base and a cable clamp is the way the cable bundle can be mounted: while the cable
Diagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
Material High-quality aluminium alloy High-quality aluminium alloy
Aluminium enclosures The -Series of enclosures offers excellent resistance in industrial and transport environments. They are ideal for a wide series of applications, including configurations with terminals,
.com More than a machine. Power your life
Hydraulic Clamp 50mm Heavy Duty Radial Drilling Machine with Variable Speed Proven Performance, Quality and Cost-Effeteness www.maxnovomachine +86-514-87892928 info@maxnovomachine This kind of MM-R50V
CMS 603DC BM. Optimised for Installation
Product Information Document Full range ceiling loudspeaker for installation applications 80 Watts continuous, 320 Watts peak power Next generation 6" Dual Concentric driver featuring Omnimagnet technology
TECHNICAL INFORMATION
NONMETALLIC FLOOR BOX & ACCESSORIES TECHNICAL INFORMATION KRALOY FB FLOOR BOX Kraloy FB Floor Box 6.063 4.030 Typ. 1" 4.940 4.560 6.375 3/4" 3/4" 5.740 6.000 1" Product Description Kraloy FB Floor Box
Standard Halogen Light
Standard Halogen Light : Niche type protection index IP 68 underwater light for concrete or vinyl pools. Material: Body and Rim are made of UV resistance white ABS. Cable:.6 m H07RN-F cable with 2 x 4
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes 05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A76 A76 pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab Δ déåéê~ä=^ééäáå~íáçåë o^`l=ñäççê=äçñéë=~êé=áçé~ääó=ëìáíéç
Operating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
Flush Round Single or Multi-Service Non-Metallic Concrete Floor Box Floor Boxes
Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Dimensions Inches (mm) D C PF1 Min. Depth of Pour 3.00" (76.2) Capacity
CMS601. Product Description. Features. Applications
CMS61 Product Description The Tannoy CMS61 is a full bandwidth; high power and high sensitivity ceiling monitor system. The design comprises a 165mm (6.5") transducer mounted in a vented, injection moulded,
Wagons & Chests. Tool Sets. (FA Series) Modular Storage Tray Sets. Full-extension ball bearing drawer slides open and close easier
Wagons & Chests Modular Storage Tray Sets Tool Sets (FA Series) Full-extension ball bearing drawer slides open and close easier Anti-shock protection on all four corners Central locking with two reversible
Round or Square Chicago Plenum Down Light Housing with Lamp
Installation Instructions for 90ELED-DCP Round or Square Chicago Plenum Down Light Housing with Lamp LED E_-L_DC. LED - ROUND/ SQUARE GENERAL PRODUCT I NFORMATION: This product is suitable for indoor locations.
TS-20KD-1010 LOW PROFILE CARGO SCALE INSTALLATION GUIDE
TS-20KD-1010 LOW PROFILE CARGO SCALE INSTALLATION GUIDE Triner Scale & Mfg. Co., Inc. 8411 Hacks Cross Rd. Olive Branch, MS 38654 Phone: 800-238-0152 Fax: 662-809-2386 Description The Triner Scale Model
Spiral gypsum plasterboard fixing
Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per
Simplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
Kiosk Solution W1000. Installation and Assembly Instructions July 2015 Edition
Kiosk Solution W1000 Installation and Assembly Instructions July 2015 Edition All product names mentioned in this document are the trademarks, brands or registered trademarks of their respective owner.
TECTUS. The completely concealed hinge system
The completely concealed hinge system index te 210 3d up to 40 kg 4 te 310 3d up to 60 kg 5 te 510 3d up to 100 kg 6 TE 525 3D up to 100 kg 7 te 630 3d up to 200 kg 8 Cable set TECTUS Accessories 9 Fixing
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
Perfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks
ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks 221 SERIES LEVER-NUTS The Next Generation of Compact Splicing Connectors 221 SERIES LEVER-NUTS The Difference is Clear:
Distributed Design Series
APPLICATIONS Convention centers, exhibit halls Corporate training rooms, ballrooms Athletic venues, sports facilities, health clubs Houses of worship Malls, airports FEATURES High intelligibility with
Installation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
BVS Cable support systems
Installation manual BVS Cable support systems Installation method Additional products Industriveien 29, 2020 Skedsmokorset, Norway BVS CABLE SUPPORT SYSTEMS Content Page no. Description 3-11 BVS Additional
T360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
Bracket guide. LK Pipe Pole. LK Radiator fixture Uni
Bracket guide LK Radiator fixture Uni LK Radiator fixture Uni c/c 40 (Article no. 481 43 92) LK Radiator fixture Uni c/c 50 (Article no. 481 44 03) LK Pipe Pole (Article no. 481 43 91, 481 43 90) Used
Distributed Design D SERIES D6 TWO-WAY 6.5-INCH HIGH OUTPUT CEILING MOUNT LOUDSPEAKER FEATURES APPLICATIONS
APPLICATIONS Convention centers, exhibit halls Corporate training rooms, ballrooms Athletic venues, sports facilities, health clubs Houses of worship Malls, airports Nightclubs, bars, restaurants The is
Job no. 5241_Accessories Brochure_Size: 8.2 x 8.2 _ KOHLER Genuine Accessories
KOHLER Genuine Accessories CHOOSING THE PERFECT WALL-HUNG TOILET FOR YOUR BATHROOM IS N0T ENOUGH. KOHLER presents a range of accessories to enhace your bathroom experience. INSTAFIT+ Specially designed
Wash basin and urinal fixings Complete fixing sets.
123 Wash basin and urinal fixings... page 124 WC and sanitary fixings... page 127 Accessories for sanitary fixings... page 129 WC fixing WB... page 131 On wall installation... page 132 124 SANITARY FIXINGS
GENERAL CATALOGUE. Connectivity for workplaces
GENERAL CATALOGUE Connectivity for workplaces CONTENTS GENERAL 2 General Catalogue Connectivity for workplaces WORKPLACE SOLUTIONS SIMON 500 CIMA SIMON K45 SIMON TRUNKING p. 4 p. 86 p. 150 SIMON ELECTRICAL
Raised Floor system LIMOGES Cedex. Phone : Fax :
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 Raised Floor system CONTENTS PAGES 1.Range 1 to 3 2.Installation process 4 to 10 3.Products détails 11 to 22 4.Technical characteristics
Tried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
Installation. Instructions. Built-In Microwave/Convection and Microwave Ovens. Models ZMC1095 JEB1095 JEB1055
Installation Instructions Built-In Microwave/Convection and Microwave Ovens Models ZMC1095 JEB1095 JEB1055 Before you begin Read these instructions completely and carefully. IMPORTANT: Save these instructions
Mizuho America Inc Ahern Avenue Union City, CA Phone No
Hongo Shintoku Building 7F, 3-38- Hongo, Bunkyo-ku, Tokyo 3-0033, JAPAN Phone F a x U R L E-mail +8-3-385-70 +8-3-388-705 www.mizuhomedical.co.jp sales-dept@mizuhomedical.co.jp Caution Prior to product
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
General Installation Instructions
General Installation Instructions WARNING To reduce the risk of death, injury or property damage from fire, electric shock, cuts, abrasions, falling parts and other hazards: Service of the equipment must
1.1. THREADED SLEEVES for different fixing purposes
.. THREADED SLEEVES for different fixing purposes ANCHORING TECHNOLOGY GENERAL INFORMATION INDEX General information...................................... Installation-kits D&W 5 mm...............................
6.1. PUSH-PULL-PROPS and accessories
6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................
TECTUS. The completely concealed hinge system
TECTUS The completely concealed hinge system It s still design even if there s nothing to be seen! TECTUS This Latin word for concealed signifies SIMONSWERK s newly developed, completely hidden hinge system.
Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
COWO. Customer Wall Outlet. 1 General. 2 Kit content. 3 Handling of the box. TC-1203-IP Rev A, Apr
COWO I N S T A L L A T I O N I N S T R U C T I O N TC-1203-IP Rev A, Apr 2017 www.commscope.com Customer Wall Outlet 1 General Customer Wall Outlet 2 Fiber for max. 2 bend reduced fibers, 2 SC-adapters
Fast and flexible use Powerful results
Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete
TECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
Multilift. Two-stage lifting column
Multilift Two-stage lifting column Two-stage lifting column - Multilift Slimline design and and an unbeatable price/performance ratio Longitudinal slots 9Simple 9 connection Milled slot in the external
Khathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
The following parts list is maintained for the UPI structural components.
4 PARTS LIST The following parts list is maintained for the UPI structural components. The product code consists of two four-digit parts: the first part refers to the product group and the second to the
Installation Manual Roof Frames for Use with Rinnai Solar Hot Water Systems
Installation Manual Roof Frames for Use with Rinnai Solar Hot Water Systems This system shall be installed in accordance with: Manufacturer s Installation Instructions Current AS/NZS 300 All applicable
Distributed Design D SERIES D8 TWO-WAY 8-INCH HIGH OUTPUT CEILING MOUNT LOUDSPEAKER FEATURES APPLICATIONS
APPLICATIONS Convention centers, exhibit halls Corporate training rooms, ballrooms Athletic venues, sports facilities, health clubs Houses of worship Malls, airports FEATURES High intelligibility with
Operating, Servicing, and Safety Manual Model # & 72 Ultimate Box & Pan Brake
Operating, Servicing, and Safety Manual Model # 2800 48 & 72 Ultimate Box & Pan Brake CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. 1-800-467-2464
Sport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
aluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
Open Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
Install the Housing. Installation Instructions for Entra Round or Square Type IC, Air-tight New Construction Adjustable LED Housing EN3_-LH9_ 1.
Installation Instructions for Entra Round or Square Type IC, Air-tight New Construction Adjustable LED Housing 90ENTRA EN_-LH9_. LED - ROUND/ SQUARE GENERAL PRODUCT I NFORMATION: This product is safety
Through and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
CountryAccents Pergola Assembly Instructions
CountryAccents Pergola Assembly Instructions Options 11 2" Squares Lattice Railing Gingerbread Scroll (For 5" Posts Only) Site Preparation Site preparation for either the round column or the 5" post pergola
Wiring ducts Easily allows for organization, pulling and separation of cables
Easily allows for organization, pulling and separation of cables 2 Catalogue Wiring ducts I ABB Index Halogen free wiring ducts with vertical slots 4 Thermoplastic wiring ducts with vertical slots Flexible
CVS 4. Product Description. Features. Applications
Product Description The Tannoy CVS4 is a full bandwidth ceiling speaker system comprising a 1mm (4. ) mid bass driver with a coaxially mounted 19mm (.75 ) high frequency section mounted in a vented, injection
Annexe to: IECEx SIR U Issue 5 Redapt Engineering Co. Limited Electrical Component: Ranges of Adaptor, Reducers and Stopping Plugs
Product Descriptions and Codings Adaptors and Reducers The AD-U series adaptors and RD-U series reducers each comprise a metallic, hexagonal, hollow body with an external male thread and an internal female
1. In the Y direction: to the vertical axis of the wall (middle of the wall)
Installation of TENLOC Panel Connectors Precast Factory Installation of the TENLOC The is placed into the reinforcement of the wall and attached to the mold with nails. The wall thickness must be minimum
GMS FLEX. / Versatile mounting system for open-terrain PV power plants / Adaptable to terrain: Variable module tilt angle and lateral tilt, various
GMS FLEX Adjustable and flexible as the nature / Versatile mounting system for open-terrain PV power plants / Adaptable to terrain: Variable module tilt angle and lateral tilt, various foundation types
with Lamp Install the Housing with Adjustable Bars Installation Instructions for LED E3_-L_DN 1.1 ½ to ¾ ¾ or thicker
Installation Instructions for 90ELED-D Round or Square Type IC, Non-IC Down Light Housing with Lamp LED E_-L_DN. LED - ROUND/ SQUARE GENERAL PRODUCT I NFORMATION: This product is suitable for indoor locations.
PART #MSP-DCCST Flat Panel Tilt Mount
INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate
Workbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
installation instructions WC Frame 1180mm with Dual Flush Cistern
installation instructions WC Frame 1180mm with Dual Flush Cistern (C,D,E) K F/G N L M 12 13 14 16 1 2 11 A 5 6 Q O Y 3 C 10 E D B P,Z,AA R T V S 4 U 2 No. Part no. Description Quantity A WC Frame with
HAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length