Notor LED. Designed by Julle Oksanen and Vesa Honkonen

Transcription

1 Notor LED

2 Notor LED Designed by Julle Oksanen and Vesa Honkonen Fagerhult s classic Notor G2 luminaire has now been brought right up to date using the latest LED technology. The expansive range spans suspended, surface mounted and recessed variations, offering the flexibility to maintain a consistent aesthetic across numerous applications. Notor is characterised by discretion. Its minimalist style and clean line design is constructed of aluminium with a natural anodised finish. In continuous runs Notor provides an unbroken line of light in the ceiling while the L-coupler offers the scope to create more varied installations. The LED variation is lit all the way to the end caps of the luminaire housing, further enhancing its visual appeal with illuminated corners. The luminaires can be connected using a snap in connector for safe and efficient installation, while providing additional protection to the light sources and other technology during installation Notor LED utilises the benefits of LEDs. The luminaire has an exceptional level of uniformity in the diffuser and a high luminous efficacy. Notor LED can be surface mounted or suspended via a wire pendant. 2. The system is connected via end cap of the start luminaire. The wiring is hidden by the end cap. The start luminaire can also be used in a single installation. 3. For continuous and system installations, through wiring is achieved via a snap in connection: the luminaires are clicked together and then secured with a screw joint. Each luminaire unit has an integrated ballast. 4. The continuous luminaires have an unbroken line of light without dark fields at the transition between the luminaire units. 5. The L-joints provide full lighting, creating an aesthetically pleasing transition in corners. 6. The LEDs are protected against contact by a plastic cover which prevents external influences

3 523 Notor LED Luminaire System, W Colour temp., K Luminous flux, lm Efficiency, lm/w kg Start Continuous Straight luminaire Illuminated corner Right * Left * * Only for suspension and in closed systems. Information LED-Luminaire Colour temp, (CCT) Ra (CRI) Life Colour quality 4000 K 80 L h MacAdam 4 SDCM For further information on LEDs, please refer to the Technical Information chapter. Suffix code -402 DALI Add suffix code to the end of the luminaire part number to indicate required function. Installation Designed for single or continuous installation with surface mounting and via a wire pendant and special loops that give flexible c/c spacing. Can also be mounted on the wall via the wall bracket, see accessories. Connection The luminaire is equipped with an access hole for cabling on the top. A special short end with cable entry is used for a surface mounted mains cable, see accessories. The luminaire unit is equipped with a throughwiring cable (5 1.5 mm²) and a snap-in connection in each end-cap. In a continuous installation, the luminaire row should always begin with a start luminaire. Design Luminaire unit in natural anodised, extruded aluminium finish. Louvre Opal plate in frosted acrylic (PMMA). Accessories Assembly fittings and supplementary components, see accessories. Miscellaneous The LEDs are protected against contact. Illuminated corners with wiring option can only be suspended. The illuminated corners can be used as a start luminaire and are equipped with through-wiring and quick connection in one end. The corners can only be used in closed systems. All variants By continuous installation all wiring needed is performed in the start luminaire, which provides a safe and efficient installation. A₁ A A₂ A₁ A A₂ 100 A A₁ A₂ A A₁ A₂ LED provides uniform luminance and completely illuminated corners. 3

4 523 Notor Recessed LED Opal flush Straight luminaire LED-module, lm, W Colour temp., K Length Luminous flux, lm Efficiency, lm/w kg Single Start Continuous 1250, * , , , * , , * Not possible to be mounted as single luminaire in ceilings with visible T-bars (VTB). Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (25 or 15 mm) or one-piece suspended ceilings. Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a continuous installation the luminaire row should always start with a start luminaire. With continuous installation the luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium. With continuous installation an unbroken line of light is achieved, even via a L-coupling. Louvre Opal plate in frosted acrylic (PMMA). Miscellaneous Accessories and cables, see Accessories. Illuminated corners LED-module, lm, W Colour temp., K Module Luminous flux, lm Efficiency, lm/w kg 2500, , Information LED-Luminaire Colour temp, (CCT) Ra (CRI) Lif e Colour quality 3000 K 85 L h MacAdam 4 SDCM 4000 K 85 L h MacAdam 4 SDCM For further information on LEDs, please refer to the Technical Information chapter. Suffix code -402 DALI Add suffix code to the end of the luminaire part number to indicate required function. Opal flush, 600 mm Opal flush, 1200 mm Continuous coupler bends into the frame for a single installation. Single Module A¹ A² A¹+22 A¹ A¹+22 A¹ A¹+22 A¹ Total A¹ Total A² A¹ + A¹ A¹ + A¹ + 26 A¹ Continuous Total A¹ t h 78.5 A¹ h t A² The LED board is safeguarded by the transparent contact protection with a lens function.

5 523 Notor Recessed LED Opal dropped Straight luminaire LED-module, lm, W Colour temp., K Length Luminous flux, lm Efficiency, lm/w kg Start Single/Cont./End 1250, * 2500, , , * 2500, , * Not possible to be mounted as single luminaire in ceilings with visible T-bars (VTB). Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (25 or 15 mm) or one-piece suspended ceilings. Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a continuous installation the luminaire row should always start with a start luminaire. With continuous installation the luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium. With continuous installation an unbroken line of light is achieved, even via a L-coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. Miscellaneous Accessories and cables, see Accessories. Illuminated corners LED-module, lm, W Colour temp., K Module Luminous flux, lm Efficiency, lm/w kg 2500, , Information LED-Luminaire Colour temp, (CCT) Ra (CRI) Life Colour quality 3000 K 85 L h MacAdam 4 SDCM 4000 K 85 L h MacAdam 4 SDCM For further information on LEDs, please refer to the Technical Information chapter. Suffix code -402 DALI Add suffix code to the end of the luminaire part number to indicate required function. Opal dropped, 600 mm Opal dropped, 1200 mm Illuminated L-coupling provides light right into the corner. Single Module A¹ A² A¹+22 A¹ A¹+22 A¹ A¹+22 A¹ Total A¹ Total A² A¹ + A¹ A¹ + A¹ + 26 A¹ Continuous Total A¹ t h h 78.5 A¹ t A² Dummy section. 5

6 Notor Recessed LED Accessories 1. Mounting bracket Mounting bracket/pair Dummy section Dummy section 600 mm, Opal dropped Dummy section 600 mm, Opal flush End-cap End-cap/pair, Opal flush End-cap/pair, Opal dropped Cover unit Cover plate/pair provides IP 44 on dropped opal start luminaire used single installation. Cover plate comes with start luminaire Mains cable 1-phase, 3-way connectors (Wieland GST). Mains cable, female, length 2.0 m Mains cable, female + earthed plug, length 2.0 m Connection cables, quick connection system, 3-way White connection cable, female + male, cross-section 1.5 mm 2, 1-phase, 3-way connectors (Wieland GST). Length 1.0 m Length 2.0 m Length 2.5 m Length 3.0 m Mains cable 1-phase + dimming (Wieland GST) 5-way. Mains cable, female, length 2.0 m Connection cables, quick connection system, 5-way Black connection cable, female + male, cross-section 1.5 mm 2, 1-phase + dimming (Wieland GST) 5-way. Length 1.0 m Length 2.0 m Length 2.5 m Length 3.0 m ex. 1.0 m mm 1200 mm 647 Length Inter-connecting cable mm 1.0 m mm 1.0 m mm 2.0 m mm 2.0 m mm 2.0 m mm 2.5 m

7

8 australia eagle lighting australia victoria Jets Court Melbourne Airport, VIC 3045 Phone Fax new south wales Unit 4, 21 Mars Road Lane Cove, NSW 2066 Phone Fax Fagerhult develops, manufactures and market professional lighting systems for human environments. Our operations are run with a constant focus on design, function, flexibility and energy saving. Fagerhult is a member of the Fagerhult Group, the largest lighting group in the Nordic region and a leading company in Europe. We have offices in more than 15 countries and production units in Europe, China and Australia. queensland 53 Caswell Street East Brisbane, QLD 4169 Phone Fax act lite-tech agencies 1 Lithgow Street Fyshwick, ACT 2609 Phone Fax tasmania southern lighting & distribution 34 Federal Street North Hobart, TAS 7000 Phone Fax south australia h.i. lighting sa pty ltd 8 Hender Avenue Magill, SA 5072 Phone Fax western australia h.i. lighting pty ltd 111 Broadway Bassendean, WA 6054 Phone Fax new zealand fagerhult new zealand auckland Level 1, 18A Neilpark Drive East Tamaki, Auckland 2013 Mobile Mobile wellington Mobile christchurch flare lighting Unit 1/204 Cumnor Terrace Woolston 8023 Phone Fax