Linx MEMBER OF THE FAGERHULT GROUP

Transcription

1 Linx MEMBER OF THE FAGERHULT GROUP

2 Designer Olle Lundberg has added a new park luminaire Linx to ateljé Lyktan's outdoor product range. Lundberg has created a minimalist luminaire in the modern idiom based on a LED light source. Linx is available as post luminaire or bollard, and both models are equipped with the latest lighting technology. The post version is equipped with wide-beamed lenses that maximise spread, and a high-tech film that diffuses the light. The bollard emits indirect shaded light via a semi-diffuse reflector. The luminaire is ideal along promenades and walkways where symmetric, wellshaded light is strived for. While Linx blends well into the modern landscape, it also creates exciting contrasts with older, more diverse architecture. "Because the eye is drawn toward light, it's important that the luminaire doesn't dazzle; the light must be there, but no glare," says Olle Lundberg.

3 Photographed in ateljé Lyktan's light laboratory, Åhus.

4 While Linx blends well into the modern landscape, it also creates exciting contrasts with older, more diverse architecture.

5 Technical information

6 Linx post Design by Olle Lundberg Material Installation Connection Standard colours Diffuser Light scattering Light source Other Luminaire housing and connection to pole in cast aluminium. Shade in impact-resistant acrylic. Internal, white painted reflector in aluminium. For mounting on 60 mm poles. Luminaire supplied with 6 m 5-wire cable. Anthracite-grey RAL9023 textured, Aluminium-grey RAL9006 textured, or Graphite-grey RAL7016 textured. Other colours available on request. Frosted technical foil for optimal light scattering and glare control. Symmetric omnidirectional. Including LED module equipped with Cree XP-G3. Colour temperature: 3000K or 4000K. Colour rendering: CRI 80. Chromaticity tolerance: 3 SDCM. Equipped with LEDIL lenses for optimised light scattering. Rated lifetime: L90 B h, L80 B h. IK class: 10. Projected wind area: 0.06 m². Weight: 13.2 kg. Pole and connection box not included. Can be ordered separately. Linx bollard Design by Olle Lundberg Material Luminaire housing in cast aluminium. Aluminium reflector. Clear protective glass. Stainless steel bezel around protective glass. Installation Fixing to 108 foundation, in-situ casting or ground fixing plate. Each fixing is included in the specified article no. Connection Luminaire supplied with external driver incl. connection box with quick connector to luminaire. Terminal block 4x16 mm². Protech fuse 6A included. Standard colour Anthracite Grey textured RAL9023, Silver Grey textured RAL9006, Graphite Black textured RAL7016. Other colours available on request. Diffuser LED module is recessed in the reflector to prevent glare. Clear protective glass. Light scattering Symmetric. Light source Incl. LED light source, colour temperature 3000K or 4000K. Colour rendering CRI 80. Chromaticity tolerance 3 SDCM. Service life: L90 B h. Other IK code 10. Luminaire housing excluding fixing can be quoted upon request. Description Type ØxH (mm) Luminaire power Luminaire flux Anthracite-grey Aluminium-grey Graphite-grey Colour temp. Post DALI 604x253 22W LED 2500 lm K Post DALI 604x253 31W LED 3270 lm K Post DALI 604x253 37W LED 4100 lm K Post DALI 604x253 22W LED 2290 lm K Post DALI 604x253 31W LED 3000 lm K Post DALI 604x253 37W LED 3760 lm K 108 foundation ØxH (mm) Luminaire power Luminaire flux Luminaire efficacy Anthracite-grey Aluminium-grey Graphite-grey On/off 255x199 22W LED 1150 lm 59 lm/w DALI 255x199 22W LED 1150 lm 59 lm/w Ground fixing plate ØxH (mm) Luminaire power Luminaire flux Luminaire efficacy Anthracite-grey Aluminium-grey Graphite-grey On/off 255x199 22W LED 1150 lm 59 lm/w DALI 255x199 22W LED 1150 lm 59 lm/w In-situ casting ØxH (mm) Luminaire power Luminaire flux Luminaire efficacy Anthracite-grey Aluminium-grey Graphite-grey On/off 255x199 22W LED 1150 lm 59 lm/w DALI 255x199 22W LED 1150 lm 59 lm/w Above article numbers are with colour temperature 3000K. For article numbers with colour temperature 4000K, please visit Ø255 The pole luminaire is fitted with a specially designed LED module. To minimize glare the luminaire is equipped with a frosted technical foil The pole connection in cast aluminium attaches to the shade in impact-resistant acrylic The bollard emits indirect shaded light via a semidiffuse reflector. Ø255 Ø Ø Ø99 Ø72 Fitted with a STARK - SLE module. Linx

7 The post luminaire consists of a luminaire housing and pole connection in cast aluminium with a shade in impact-resistant acrylic and internal white-painted aluminium reflector. The bollard also has a luminaire housing in cast aluminium and an aluminium reflector. The luminaire housing is adapted for attachment to a 108 foundation, in-situ casting or ground fixing plate. The bollard version has a luminous flux of 1150 lm, and to prevent glare the LED module is recessed in the reflector. Linx is available in three standard colours and is also available with or without a dimmer.

8 Head Office Fyrvaktaregatan 7, SE Åhus Tel: +46 (0) Fax: +46 (0) Offices Stockholm: Hesselmans Torg 9, SE Nacka Gothenburg: Fabriksgatan 7, SE Gothenburg Malmö: Slussgatan 10, SE Malmö Luleå: Västra Varvsgatan 3, SE Luleå England: Dolben Street, GB-SE1 0UQ London Norway: Strandveien 30, Pb 471, N-1327 Lysaker Finland: Mannerheimintie 113, FI Helsinki Russia: Butyrskaya Str. 75, office 305, RU Moscow