Trend Collection. create your own light system in only 5 steps

Transcription

1 Trend Collection LED STRIPES module create your own light system in only 5 steps

2 LED STRIPES module Flexible system: sectional, can be shortened, extendable Sheer unlimited application possibilities Colour changer, including 5 programmes, 16 fixed colours, and a remote control Stripes with RGB, warm and cold white light Also available with motion sensor Both white light versions and the RGB stripes come with an on/off remote control and are dimmable Easy installation with adhesive tape 100% high-quality LEDs, 100% energy-efficient, low heat emission Durability of up to 25,000 hours 2

3 3

4 4

5 s Module numerous combinations, a lot of possibilities to connect and extend With the EGLO s Modules you can individually illuminate your living space. Combine lengths, light colours and shapes of the LED stripes for your own personal light system. 5

6 how to combine lights on in 5 steps 1 Step 1: Select the s straight or angular (length, light colour and quantity) Step 2: Select the connector (connection cable) 2 5 Step 5: Select the accessories 4 s information system: 1 = s straight or angular 2 = Connector 3 = Switch (remote control, motion sensor) 4 = Driver 5 = Accessories Step 4: Select the driver (corresponding to the wattage of the stripes) 6

7 check list for your led stripes module selection: ü Selection of s Indoor living area: s without coating (Step 1) Moist room version: s with coating (Step 1) (also useable for indoor living areas, provides a better protection against moisture and dust) ü Quantity and length of the s Take the measurements of the object that you want to illuminate and choose the quantity of straight s accordingly. (Step 1). If the object to be illuminated has corners, please choose angular s (Step 1) or a connecting cable (Step 2). All angular s have a coating. Nevertheless, you can connect them with s without coating. LED Stipes without coating can be shortened. They can be re-connected with connecting cable (step 2). The maxiumum length of stripes in a row is 5m. ü Selection of the light colour _ Stripes with RGB colour changer _ White s with 3000 Kelvin (warm white light) _ White s with 6400 Kelvin (cold white light) ü Selection of the switch (Step 3) _ Remote control: RGB colour changer _ Remote control: white light (3000 or 6400 Kelvin) _ Motion sensor: only for white light (3000 or 6400 Kelvin) Remote controls have an on/off switch as well as a dimming function. The motion sensor can`t be combined with a remote control. 3 Step 3: Select the switch (remote control, motion sensor) ü Selection of the driver Add the wattage of all needed s (straight and angular) and choose the corresponding driver (Step 4) 30 W, 48 W or 60 W. Attention: Wattage of the driver must be higher than the combined amount of the wattage of all s. ü Selection of the accessories (Step 5) _ Decorative aluminium rail _ Angular section to aluminium rail _ Junction box _ Heat shrink tube (IP 44) 7

8 led stripes step 1 1 WARM NEUTRAL cm 100 cm 500 cm 100 cm 500 cm 100 cm 4.8 W 24 W 4.8 W 24 W 7.2 W 36 W white (3000K) white (3000K) white (6400K) white (6400K) RGB RGB adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape WARM NEUTRAL cm 100 cm 500 cm 100 cm 500 cm 100 cm 4.8 W 24 W 4.8 W 24 W 7.2 W 36 W white (3000K) white (3000K) white (6400K) white (6400K) RGB RGB adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape WARM NEUTRAL Dimension 47 x 47 mm Dimension 47 x 47 mm Dimension 47 x 47 mm 0.4 W 0.4 W 0.72 W white (3000K) white (6400K) RGB adhesive tape adhesive tape adhesive tape

9 connectors step connecting cable 50 cm to connect uncut stripes connecting cable connecting cable 10 cm 10 cm to connect uncut stripes to connect uncut stripes connecting cable connecting cable 50 cm 10 cm to connect uncut stripes to connect shortened stripes connecting cable for a connection between shortened and t shortened stripes Example of use on page 12 Eco connection for shortened stripes open front part, connect it with shortened and close it again light colour warm white cold white RGB Pin connection for n shortened Stripes connectable with a new Stripe 9

10 control system step remote control Sensor with cable 50 cm Adapter cable 50 cm Switch remote control LED colour warm and cold white incl. fastening clip for strain relief remote control motion Sensor Sensor with cable 50 cm Adapter cable 50 cm Adapter cable 50 cm Switch on/off Infraredsensor Switch remote control Sensor reach 1 bis 5 cm LED colour RGB incl. fastening clip for strain relief incl. fastening clip for strain relief driver step driver 30 W Adapter V Cable length max. 2.5 m Watt 30 W driver 48 W Adapter V Cable length max. 2.5 m Watt 48 W driver 60 W Adapter V Cable length max. 2.5 m Watt 60 W 10

11 accessories step aluminium rail connector junction box incl. 1 rail, 1 acryl-cover, 1 feed cap, 1 end cap, 2 mounting clips, 2 retaining wedges, 1 length connector, tools 100 cm Accessory for the aluminium rail Dimension 55 x 55 mm Connecting cables 4 x 50 cm Adapter cable 50 cm Not more than 5m of stripes in a row Heat shrink tube 10 cm Usable for 2 connections (5cm each) motion sensor heat shrink tube The heat shrink tube provides better protection against moisture and dust. With the help of a hot air blower you can shrink the tube. Example of use on page 13 Stripe heat shrink tube Stripe coated IP20 coated hot air blower special protection 11

12 example of use shortable All straight s can be shortened. s with coating can be shortened, but you can`t connect them again. Only s without coating can be connected again. You can connect them again with the connecting cable RGB stripes White light stripes Please only cut the s at the designated marks. Open front part, connect it with shortened LED Stripe and close it again. If you connect s again, please check whether the polarity is correct. example of use aluminium rail Stylish aluminium rail for a unique light The aluminium rail (1 m) is especially qualified for LED Stripes that are installed in a visible area. It gives the s a special and elegant touch, diffuses the light and lends the room a soft and harmonic ambience. You can use all EGLO LED Stripes Modules in combination with the aluminium rail. You can easily install the aluminium rail with the mounting clips. In addition to the aluminium rail you get suitable end and connecting parts, as well as stoppers that allow a vertical installation of the rail. 12

13 example of use humidity For installation in moist areas you can use the following products: s: 92306, 92307, 92308, 92309, 92312, 92313, 92367, 92368, Connecting cable: 92297, Accessory: With coated s and insulated connecting cables you can install a light system in areas with splash water. The heat shrink tube protects the connections between s and cables, or between two s. If you combine the aluminium rail with coated stripes, you can also use it in moisture areas. Attention: Not to be used in wet areas or underwater. example of use junction box Endless possibilities With the junction box you can connect 4 s and synchronise them. With the 50 cm connection cables you also have the possibility to combine areas which are t adjacent to each other (e.g. shelves). The junction box allows you to use more than 5m of stripes for your project, but remember: t more than 5m of stripes in a row. What you can do, for example, is to connect 3m of stripes to each one of the 4 junction points, giving you 12m in total. Attention: the wattage of all s you have used must t exceed the wattage of the driver. 13

14 calculation example watt Calculation is based on 1 m stripes Driver 30 Watt (max. stripes) Driver 48 Watt (max. stripes) Driver 60 Watt (max. stripes) white light stripes straight per 4.8 Watt angular per 0.4 Watt switch 0.6 Watt 6 x 1 x 1 x = 29.8 Watt 9 x 8 x 1 x = 47.0 Watt 12 x 4 x 1 x = 59.8 Watt RGB stripes straight per 7.2 Watt angular per 0.72 Watt switch 0.6 Watt 4 x 0 x 1 x = 29.4 Watt 6 x 4 x 1 x = Watt 8 x 2 x 1 x = Watt Attention: To retain the maximum light output quality it is adviseable t to connect more then 5 m of stripes in a row. The only way to use more than 5m is the junction box. Yet, even with the junction box, we do t advise you to connect more than 5m of stripes in a row (s. junction box on p. 13). Legend to symbols: RGB colour changer WARM white light (3000 K warm white) COLD WARM NEUTRAL white light (6400 K cold white) 6400K 3000K dimmable Disclaimer: Errors and omissions excepted. Models and prices subject to change without tice. Our products conform to the European standard EN The content of this brochure is the property of EGLO Leuchten GmbH. All rights reserved. Pictures and texts may t be used without explicit prior approval in writing. Illustrations were printed in 4c and may vary from the actual product shown. Design, layout and formatting: EGLO GmbH, A-6136 Pill AUSTRIA Print: Alpina Druck GmbH, Innsbruck AUSTRIA Please combine only s Modules which you find in this folder. Using other components may lead to malfunctions or short-circuit. 14

15 15