LED source. Lumascape Head Office - Cleveland QLD, Australia LS853LED inground uplight luminaire

Transcription

1 source Lumascape Head Office - Cleveland QLD, Australia inground uplight luminaire

2 kg IP68 IK10 OPTIONAL OPTIONAL The is a full featured shallow depth inground luminaire. The luminaire features a built in driver, and measures only 180 mm deep (in direct burial fmat). The ability to aim the luminaire ensures the most efficient light delivery can be set accding to the site conditions. SPECIFICATIONS Source 14 W 20 W (1) Control Signal Dimmable Integral driver 20 W (1) RGB PWM Optional f 24 V DC and 12 V AC versions Recommend using LS6125 f 0-10 V dimming NOTE: 4 wires circuit required to be run to luminaire. F alternative single colour dimming options refer to page 162 RGB Control F RGB control options refer to page 162 NOTE: 6 wires circuit required to be run to luminaire. IP Rating Construction Installation Types Drive-over Static Load Rating Impact Rating Standard Inclusions Ambient Operating Temperature Warranty IP marine grade stainless steel Direct burial Landscapes, etc. Mounting collar Decks and grates (LS640) Pre-installation blockout Drive-over other applications requiring pre-installation (LS6072-K - with single gland entry) (LS6052-K - single colour line voltage with IP68 connect) (LS6102-K - single colour low voltage with IP68 connect) With OptiClear lens and pre-installation blockout 4200 kg with OptiClear lens and pre-installation blockout IK10 with OptiClear lens Teflon coated cover screws MicroAntiLeach cable entry Thermal cutout Humidity absbent desiccant -20 C to +50 C 10 year structural, 1 year electrical Accessies Order separately Refer to page 13 f direct burial Refer to page 15 f pre-installation Photometrics Refer to page 16 Glass Temperature HumanTouch compliant 65 C NOTE: Product specifications are subject to change without notice. Any luminaire can become hot - take care with appropriate use and placement (1) Nominal power consumption only, actual power consumed may vary. Recessed Round Flush Pre-installation Round Flush 360 o 20 20

3 12 Direct Burial Options WHY USE DIRECT BURIAL Direct burial installation is ideal f landscaping areas in locations where the depth is restricted. This type of installation also allows f maximum heat dissipation. The stainless steel construction of the luminaire perfms flawlessly in alkaline and acidic soil types, as well as chemically fertilised landscapes. Option f Direct Burial Options OptiClear Glass Glass of very high optical purity and load strength. Suitable f drive-over applications. Armoured & Junction Box Armoured cable 0.6 m provides protection against damage to cable between luminaire and 3 way junction box (included). Allows f loop in / loop out and flexibility of luminaire placement. Not available f RGB option Single Gland MicroAntiLeach and 3 m flexible cable provide additional protection to luminaire against water ingress via cable. OptiClear glass with process. Suitable f drive-over applications. Bosilicate Glass Ideal f general use areas. Not suitable f drive-over applications. Options f Direct Burial Recessed SS316: Polished SS316: Brushed Ø240 mm Round Flush SS316: Polished SS316: Brushed Ø256 mm Ø240 mm 3 mm Use recessed cover f installation in soil, grass, pavers and other uneven surfaces where no cover overhang is desired. 180 mm 14 mm Use flush covers f installation in fine finished surfaces such as granite and marble. They can also be used in some suspended applications (decks, etc). The flush cover will conceal gaps between the luminaire and the surrounding surface. 180 mm 14 mm

4 TM Direct Burial 13 CONFIGURE THIS PRODUCT Product Wattage Colour Optical System Body Depth 28 Supply WATTAGE COLOUR OPTICAL SYSTEM Beam 14 W W 20 RGB M4 Adjustable Narrow (1) 14 NR Adjustable Medium 30 ME Linear hizontal (1) 40 x 20 LH Linear vertical (1) 20 x 40 LV (1) Not available f RGB. NOTE: Beam angle values are nominal. INSTALLATION TYPE & Body Depth Depth Direct burial 180 mm 28 F other body depths consult facty. OptiClear Bosilicate glass Very high optical purity and load strength OptiClear with process Ideal f general use areas Material Finish Recessed cover Round flush cover Stainless steel Stainless steel A G X Polished Brushed Polished Brushed B H D I Location Side Bottom Supply N Q V AC 50/60 Hz (1) V DC 12 V AC (2) 07 (2) (3) 24 V DC 12 V AC dimmable PWM dimmable (1) Not available f RGB. (2) Requires remote power supply transfmer - see page 167. (3) Required f RGB single colour dimming. LS V to PWM converter recommended f single colour dimming - der separately. F RGB control and alternative single colour dimming options refer to page Armoured cable and J-box (1) 81 Single gland entry, MicroAntiLeach 84 (1) Not available f RGB dimming. ACCESSORIES LS636 Brass grill External accessy Use with recessed covers only Not suitable f use in traffic areas LS6013 Slatted louvre LS688 Wall wash lens LS6012 Cross hatch louvre LS691 Prismatic lens standard Other accessy stacking options may be available - consult facty

5 14 Pre-Install & Mounting Collar Options WHY USE PRE-INSTALLATION BLOCKOUT This type of installation requires the LS6052-K, LS6072-K LS6102-K pre-installation kit (der separately) which acts as a blockout, and is intended f installation befe the luminaire. This method ensures the luminaire itself is not damaged during concreting other site wks, and also allows f all wiring to be completed pri to luminaire placement. Pre-installation also allows f off-site maintenance, via the detachable IP68 connect fitted on the luminaire housing (LS6072-K uses a single gland entry instead). The mating connect on the cable has a sealing cap which ensures water does not enter the cable befe the installation is completed. Pre-installation is required f all drive-over applications. WHY USE MOUNTING COLLARS The LS640 mounting collar suppts installation in decks and grates. They may also be used in hollow flos where there is appropriate ventilation. Option f Pre-Installation Blockout Options IP67 Connect & Junction Box The luminaire is fitted with an IP68 connect, which attaches directly to the cable supplied with LS6052-K LS6102-K without the use of any tools. The cable is 0.56 m in length, and is facty assembled with a 3 way junction box. The LS640 mounting collar and the LS6072-K pre-installation kit have a single gland entry. See page 12. OptiClear Glass Glass of very high optical purity and load strength. Suitable f drive-over applications. OptiClear glass with process. Suitable f drive-over applications. Bosilicate Glass Ideal f general use areas. Not suitable f drive-over application. Options f Pre-Installation Blockout & Mounting Collar Round Flush SS316: Polished SS316: Brushed Flush covers f pre-installation use special seals and suppt bushes to ensure static loads up to 4200 kg are properly suppted. In der to achieve this drive-over rating, OptiClear must be used m m Ø262 mm m m Ø 262 mm 40 mm 21 mm Ø191 mm LS6052-K pre-installation blockout LS640 mounting collar

6 TM Pre-Install & Mounting Collar 15 CONFIGURE THIS PRODUCT Product Wattage Colour Optical System Body Depth 29 Q Supply WATTAGE 14 W W 20 OptiClear Bosilicate glass (1) COLOUR RGB Very high optical purity and load strength OptiClear with process Ideal f general use areas (1) Not suitable f drive-over. Material Finish Round flush cover M4 Stainless steel Polished Brushed M N Single gland entry, MicroAntiLeach (1) 84 IP67 connect & J-box (2) 87 (1) Mounting collar pre-installation blockout LS6072-K only. (2) Pre-installation blockout LS6102-K LS6052-K only. Not available f RGB dimming. A G X OPTICAL SYSTEM Beam Adjustable Narrow (1) 14 NR Adjustable Medium 30 ME Linear hizontal (1) 40 x 20 LH Linear vertical (1) 20 x 40 LV (1) Not available f RGB. NOTE: Beam angle values are nominal. INSTALLATION TYPE & Body Depth Depth Mounting collar (1) 180 mm 29 Pre-installation (2) 280 mm (1) Requires LS640 - der separately. (2) Requires pre-installation kit - der separately. LS6072-K with single gland entry, LS6052-K with IP68 connect f single colour line voltage (code 01), LS6102-K with IP68 connect f single colour low voltage (code 07). F other body depths consult facty. Location Bottom Supply V AC 50/60 Hz (1) V DC 12 V AC (2) 07 (2) (3) 24 V DC 12 V AC dimmable PWM dimmable (1) Not available f RGB. (2) Requires remote power supply transfmer - see page 167. (3) Required f RGB single colour dimming. LS V to PWM converter recommended f single colour dimming - der separately. F RGB control and alternative single colour dimming options refer to page 162. ACCESSORIES LS636 Brass grill External accessy Use with recessed covers only Not suitable f use in traffic areas Q 27 LS6013 Slatted louvre LS688 Wall wash lens LS6012 Cross hatch louvre LS691 Prismatic lens standard Other accessy stacking options may be available - consult facty

7 16 Photometrics PHOTOMETRICS IES data is available at Technical Data Photometric Files K 14 Beam Angle Power Input 15 W Lumens 795 Efficacy 52 lm/w Polar Candela Distribution 180º 170º º 150º 140º º 120º 4759 C 0 C 15 C 30 C 45 C 60 C 75 C Illuminance at a Distance m Center Beam lx Beam Ø cm cm cm 2379 C-0º 110º 100º 90º cm cm 4300 K 30 Beam Angle Power Input 21 W Polar Candela Distribution 180º Medium 170º º 150º 140º º C 0 C 15 C 30 C 45 C 60 C 75 C Illuminance at a Distance m Center Beam lx Beam Ø cm cm Lumens 1137 Efficacy 54 lm/w º 110º 100º cm cm C-0º 90º cm 4300 K 20 x 40 Beam Angle Power Input 21 W Lumens 1126 Efficacy 54 lm/w Polar Candela Distribution 180º 170º º 150º 140º º 120º º º C 0 C 15 C 30 C 45 C 60 C 75 C Illuminance at a Distance m Center Beam lx Beam W Beam L cm 72 cm cm 146 cm cm 218 cm cm 290 cm C-0º C-90º 90º cm 364 cm Beam Orientations Beam Orientation f the "LV" optical system Beam Orientation f the "LH" optical system