222 Photo: Jerry Riley

Transcription

1 222 Photo: Jerry Riley

2 223 KALYPSO True Color IP67 Light intensive, IP67 protected and IK10 certified, linear LED luminaire with small form factor and precise linear optics for optimum directional light.

3 224 KALYPSO True Color IP67 Convinces with light intensity and unmatched precise light control Minimalistic design language with maximum lighting effect, KALYPSO True Color convinces as a high-performance encapsulated linear surface mounted luminaire with precise linear optics. This discreet light line in IP67 provides optimum directional light and at once a high degree of protection and high light output of up to 3,580 lm/m (1,091 lm/ft). It is IK10 certified and therefore particularly robust against environmental impacts. The utilized polyurethane features a 5 times higher chemical resistance and a 10 times lower water transmission compared to typical silicones for LED applications in the relevant temperature range (-50 C to 80 C / 58 F to 176 F). The profile with a small cross section of (W x H) 20.5 mm x 25.5 mm (0.8" x 1") allows the use of three different linear lenses. 10 grazing light and 30 or 60 general illumination optics are available and guarantee a targeted illumination. Screwed diffuse end caps for an optimal sealing at both ends of the luminaire. It is available in five standard lengths and is supplied ready to plug in with a IP67 mini connector. The installation is realized with invisible light joints and connections. It is perfectly suited for the accentuation of structured facades and walls, as well as for highlighting architectural details on buildings, windows and gables.

4 225 Allows the use of 3 precise and highly efficient linear optics (10 Wall grazing, 30 and 60 general lighting optics) Maximum light output of 3,580 lm/m (1,091 lm/ft) with minimum dimensions of (W x H) 20.5 mm x 25.5 mm (0.81" x 1") IK10 Encapsulated linear LED luminaire with linear lenses IP67 protected against water, salt water and UV radiation by an clear Polyurethane encapsulation and IK10 checked (impact resistance) Cross section Length Power Luminous flux Efficacy Beam angle/optics Color temperature/color CRI 20.5 mm x 25.5 mm 0.81" x 1" 639 mm, mm, 1,264 mm, 1,514 mm, 1,826.5 mm 2.1', 3.12', 4.15', 4.97', 5.99' 6 W/m 36 W/m 1.8 W/ft 11 W/ft up to 3,580 lm/m 1,091 lm/ft 101 lm/w 10, 30, 60 2,000 K 5,000 K, Tunable White, RGB 85 95

5 226 KALYPSO True Color IP67 The matching light distribution for your design 3 precisely manufactured PMMA optics for light control without large loss in luminous flux Lens 10 A Linear lens, narrow Absolute strictly directional light distribution for precise illumination Enormous and exact illumination at very high luminance Grazing Lens 30 A Linear lens, medium Precise, deep light distribution for accurate illumination of areas Thorough illumination at high luminance and very directional light General lighting Accent and decorative lighting Lens 60 A Linear lens, wide Wide and deep light distribution (Batwing) for precise and generous illumination of areas Pleasant illumination at moderate luminance and directional light General lighting Accent and decorative lighting Wall washing A DIN 5040:A50

6 227

7 228

8 229 KALYPSO True Color IP67 Voltage (V) CRI Lumen/W (lm/w) Watt/m / Watt/ft (W/m / W/ft) Lumen/m A / Lumen/ft A (lm/m / lm/ft) min. length (mm / in) max. length (mm / ft) Page KALYPSO True Color HYDRA White IP67 HD / / / ,827 / HD / / / ,827 / 6 HD / 4.6 1,510 / / ,827 / 6 HD / 7.6 2,450 / / ,827 / 6 HD / 11 3,580 / 1, / ,827 / 6 KALYPSO True Color IQ White ATON IP67 HD / / / ,827 / HD / 7.3 1,440 / / ,827 / 6 KALYPSO True Color RGB IP67 HD / / / ,827 / 6 A At warmer light colors the luminous flux is reduced. IQ White / RGB When all channels/colors are at full power. Using single channels/colors reduces the luminous flux.

9 230 KALYPSO True Color White IP67 24 V, IP67 protected and IK10 certified, linear surface-mounted LED luminaire with small form factor. Polyurethane encapsulation offering a premium water proof sealing (values), UV resistance (no coloration or increase of absorption) chemical stability against urban gazes and protection against abrasion. A thin air channel between the LEDs and the encapsulation compound enables a optimum rendition of the LED spectrum (no color shift). Extruded H-shaped aluminum profile painted in white with cable groove on its backside. Delivered with male/female IP67 connectors and translucent end caps for a perfect fixture to fixture light overlap. Allows the use of 3 linear lenses (15, 30 or 60 ) integrated in the encapsulation material. Ideal solution for wall grazing (10 ) or wide flood illumination (30 and 60 ) with precise light control in outdoor or humid environments. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear Tj Away thin flexible circuit board technology. In combination with ceramic LED packages a thermal resistivity of 18.5 K/W is achieved for an optimal heat dissipation (junction to profile) which guarantees an outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality japanese LEDs with 3 step MacAdams (SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 95 and TM up to R f = 91 / R g = 100 ensuring a remarkable light quality. Consistent light intensity all along the luminaire length is obtained thanks to active current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 khz (flicker free for frequency higher then 1.2 khz according to IEEE P1789 standard). Engineered and produced in Germany. Dimensions & available lengths 20.5 mm / 0.81" 25 mm / 0.98" 25.5 mm / 1" 8.5 mm / 0.33" 7 mm / 0.28" 225 mm / 8.86" 200 mm / 7.87" 5 Standard lengths (L): 639 mm / 952 mm / 1,264 mm / 1,514 mm / 1,827 mm 2.1' / 3.12' / 4.15' / 4.97' / 6' 7 mm / 0.28" Tc 7 mm / 0.28" Clear encapsulated LED light line with lenses Finish: White powder coated Tc-point (Case temp.) on the rear side of the module Electrical & output data Voltage 24 Volt (23 V min, 25 V max) Temperature B Tc min = -25 C / -13 F, Tc max = specific, see Table below Storage temperature Ts min = -30 C / -22 F, Ts max = 85 C / 185 F Ambient temperature Ta min = -25 C / -13 F, Ta max = specific, see Table below CRI / R9 up to 95 / up to 65 L80/B10 > h Lifetime UV protected Resistant to solvents KALYPSO True Color HYDRA HD6 HD10 HD15 HD25 HD36 Power (W/m / W/ft) A 6 / / / / / 11 Efficacy (lm/w) W max. serial run length (m / ft) 5 / / / / / 6.6 Temperature Tc-point (Tc max) B 70 C / 158 F 70 C / 158 F 70 C / 158 F 75 C / 167 F 85 C / 185 F max. Ambient temperature (Ta max) 40 C / 104 F 40 C / 104 F 40 C / 104 F 40 C / 104 F 35 C / 95 F Wxxx/ 339 LM 79 LM 80 Photometric code LM 79 compliant LM 80 compliant IK10 Saltwater resistant Temporary immersion protection Impact resistant (suitable for walk over) HD6 HD10 HD15 HD25 HD36 low output high output No color shift Color temperature C lumen/meter (lm/m) A lumen/feet (lm/ft) A W820 2,000 K 330 / / / 264 1,420 / 432 2,070 / 630 W822 2,200 K 370 / / 188 1,000 / 304 1,620 / 493 2,370 / 721 W825 2,500 K 430 / / 215 1,140 / 346 1,850 / 563 2,710 / 825 W827 W927 2,700 K 380 / / 194 1,210 / 368 1,970 / 599 2,870 / 874 W830 W930 3,000 K 390 / / 197 1,280 / 389 2,090 / 636 3,050 / 929 W835 W K, 400 / / 203 1,350 / 410 2,190 / 667 3,200 / 974 W840 W940 4,000 K 410 / / 206 1,380 / 420 2,240 / 682 3,270 / 996 W850 5,000 K 560 / / 286 1,510 / 459 2,450 / 746 3,580 / 1,090 A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. B The Tc-point should be measured in thermal equilibrium according to IEC EN C In case of IP67 products, tolerances in the color temperature can occur. Edition: September 19, 2018 For actual data, further options and detailed information, please visit our website

10 25.5 / 1" 231 Order code Your order code KALYPSO TC HD W IP Order code example KALYPSO TC HD10 W IP LED tape HYDRA HD6... HD6 HYDRA HD10... HD10 HYDRA HD15... HD15 HYDRA HD25... HD25 HYDRA HD36... HD36 Color rendering > > 90 (only HD6, HD10)... 9 Color temperature 2,000 K ,200 K ,500 K ,700 K ,000 K ,500 K ,000 K ,000 K Length 639 mm (2.1') (2 clips recommended) mm (3.12') (2 clips recommended) ,264 mm (4.15') (3 clips recommended) ,514 mm (4.97') (3 clips recommended) ,827 mm (6') (4 clips recommended) Lens options (DIN 5040:A50) Ingress protection IP67... IP67 Lens 10 C Lens 30 C Lens 60 C C DIN 5040:A50 cd/1.000 lumen C0/C180 C90/C Photo: Shutterstock / Dr Ajay Kumar Singh Please choose your accessories Mounting Extensions / Jumpers (optional) VarioClip 010 Set (required every 40 cm / 1.31') Contour 010 Adjustable Wall Mount Set Mounting Lock Set D (for vertical mounting) VarioCon Female Mini 2 x 0.34 mm 2, 2 m / 6.56' IP VarioCon Extension Mini 2 x 0.34 mm 2, 0.1 m / 0.33' IP VarioCon Female Mini Protection Cap Mono IP67 F Adjustable Mounting Clip C007/C010 L140 VarioContour 010 Inground Channel E (for indoor installation only) SIL RAL9003-FS Recommended power supply Power Supply Unit IP / 0.8" Recommended control unit Control System White/IQ-White DT6 D The mounting lock is used to fix the sliding mounting clips, thus allowing a vertical wall mounting. Easy and clean installation due to internal mounting clips. ADONIS True Color / KALYPSO True Color H-channel also acts as cable raceway. Therefore you do not see any clips or cables from the outside. For actual data, further options and detailed information, please visit our website E Article requires end caps, please contact us for more information F Required for IP67 connector sealing at end of runs. Edition: September 19, 2018

11 232 KALYPSO True Color IQ White/RGB IP67 24 V, IP67 protected and IK10 certified, linear surface-mounted LED luminaire with small form factor. Polyurethane encapsulation offering a premium water proof sealing (values), UV resistance (no coloration or increase of absorption) chemical stability against urban gazes and protection against abrasion. A thin air channel between the LEDs and the encapsulation compound enables a optimum rendition of the LED spectrum (no color shift). Extruded H-shaped aluminum profile painted in white with cable groove on its backside. Delivered with male/female IP67 connectors and translucent end caps for a perfect fixture to fixture light overlap. Allows the use of 3 linear lenses (15, 30 or 60 ) integrated in the encapsulation material. Ideal solution for wall grazing (10 ) or wide flood illumination (30 and 60 ) with precise light control in outdoor or humid environments. Light source assembled using state of the art automated Reel to Reel (R2R) production process supporting LED Linear Tj Away thin flexible circuit board technology. In combination with ceramic LED packages an optimal heat dissipation (junction to installation surface) is achieved which guarantees an outstanding lifetime of > 60,000 hrs L80/B10 for tunable white and 30,000 hrs for RGB. Embeds for tunable white centered high quality LEDs with 3 step MacAdams (SDCM3) binning on target CCT (One Bin Only) with an extended photometric code of Wxxx/339 ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 85 and TM up to R f = 86 / R g = 98 ensuring a remarkable light quality. Consistent light intensity all along the luminaire length is obtained thanks to active current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 khz (flicker free for frequency higher then 1.2 khz according to IEEE P1789 standard). Engineered and produced in Germany. Dimensions & available lengths 20.5 mm / 0.81" 25 mm / 0.98" 25.5 mm / 1" 8.5 mm / 0.33" 7 mm / 0.28" 225 mm / 8.86" 200 mm / 7.87" 7 mm / 0.28" 5 Standard lengths (L): 639 mm / 952 mm / 1,264 mm / 1,514 mm / 1,827 mm 2.1' / 3.12' / 4.15' / 4.97' / 6' Tc 7 mm / 0.28" a) IQ White 1 + white 2 + red 3 W840 4 W822 b) RGB 1 + white 2 red 3 blue 4 green Clear encapsulated LED light line with lenses Finish: White powder coated Tc-point (Case temp.) on the rear side of the module Electrical & output data Voltage 24 Volt (23 V min, 25 V max) Temperature B Tc min = -25 C / -13 F, Tc max = 70 C / 158 F Storage temperature Ts min = -30 C / -22 F, Ts max = 85 C / 185 F Ambient temperature Ta min = -25 C / -13 F, Ta max = specific, see Table below L80/B10 > h IQ White IQ White Lifetime UV protected Resistant to solvents KALYPSO True Color IQ White ATON HD12 IQ White ATON HD24 RGB HD20 Power (W/m / W/ft) A 12 / / / 6.7 Efficacy (lm/w) A CRI / R9 85 / / 20 max. serial run length (m / ft) 5 / / / 13.1 max. Ambient temperature (Ta max) 40 C / 104 F 40 C / 104 F 45 C / 113 F lumen/meter (lm/m) A LED tape Color temperature C Color (λd) A lumen/feet (lm/ft) A IQ White ATON HD / 213 W822 (2,200 K) W840 (4,000 K) IQ White ATON HD24 1,440 / 439 RGB HD (R)/532 (G)/466 (B) 690 / 219 L h Wxxx/ 339 LM 79 LM 80 RGB Lifetime Photometric code LM 79 compliant LM 80 compliant No color shift IK10 Saltwater resistant Temporary immersion protection Impact resistant (suitable for walk over) A The given data are typical values. Due to tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. B The Tc-point should be measured in thermal equilibrium according to IEC EN C In case of IP67 products, tolerances in the color temperature can occur. Edition: September 19, 2018 For actual data, further options and detailed information, please visit our website

12 25.5 / 1" 233 Order code Your order code KALYPSO TC IP Order code example KALYPSO TC IQ W ATON HD IP LED tape IQ White ATON HD12... IQ White ATON HD12 IQ White ATON HD24... IQ White ATON HD24 RGB HD20... RGB HD20 Length 639 mm (2.1') (2 clips recommended) mm (3.12') (2 clips recommended) ,264 mm (4.15') (3 clips recommended) ,514 mm (4.97') (3 clips recommended) ,827 mm (6') (4 clips recommended) Lens options (DIN 5040:A50) Ingress protection IP67... IP67 Lens 10 3 Lens 30 3 Lens C DIN 5040:A50 cd/1.000 lumen C0/C180 C90/C270 Photo: BM Light OÜ Please choose your accessories Mounting Extensions / Jumpers (optional) VarioClip 010 Set (required every 40 cm / 1.31') Contour 010 Adjustable Wall Mount Set Mounting Lock Set D (for vertical mounting) VarioCon Female Mini 4 x 0.25 mm 2, 2 m / 6.56' IP VarioCon Extension Mini 4 x 0.25 mm 2, 0.1 m / 0.33' IP VarioCon Female Mini Protection Cap RGB F Adjustable Mounting Clip C007/C010 L140 VarioContour 010 Inground Channel E (for indoor installation only) SIL RAL9003-FS Recommended power supply Power Supply Unit IP / 0.8" Recommended control unit Control System White/IQ-White DT6 Recommended control unit Control System RGB D The mounting lock is used to fix the sliding mounting clips, thus allowing a vertical wall mounting. Easy and clean installation due to internal mounting clips. ADONIS True Color / KALYPSO True Color H-channel also acts as cable raceway. Therefore you do not see any clips or cables from the outside. For actual data, further options and detailed information, please visit our website E Article requires end caps, please contact us for more information F Required for IP67 connector sealing at end of runs. Edition: September 19, 2018