Tubing. Version 2019 Revised 11/2018

Transcription

1 Tubing Version 2019 Revised 11/2018 your order to: or fax to (763) Questions call: (763) Ranchview Lane North. Plymouth, MN 55447

2 Standard Color Code Chart P2

3 Features and Speci cations for Polyurethane Tubing Polyurethane has a high resistance to abrasion while being highly exible and kink resistant. Its most notable quality though is its memory. is tubing will stretch and ex but always return to its original shape. It is available in 23 standard colors and in four different durometer levels: 95, 90, 85, and 70. is versatile tubing is used for everything from high pressure applications to medical uses to situations where exibility is key. Depending on durometer and size, Polyconn s polyurethane tubing can be used with push-in or barbed ttings. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. UV Stabilized Polyurethane 90A -40 F to +165 F 3:1 Safety Factor To 28 Hg. No Polyurethane 95A -40 F to +165 F 3:1 Safety Factor To 28 Hg. Yes * Naturally clear tubing with a broad resistance to chemicals, water, fuel, oil and fungus. * Polyurethane has a tensile strength twice that of vinyl tubing and is suitable for air logic applications. * It is highly exible, kink resistant with an incredible memory. * A large range of sizes, colors, con gurations, and packaging options to ful ll your needs. * It is ideal to use barb ttings with Polyurethane 85A and Polyurethane 90A tubing, offering a rubberlike feel with no plasticizers to leach or migrate, and ensures a long stable service life. * Barb and push-in ttings can be used with Polyurethane 95A tubing. P3

4 @ F Bend Radius PCU-250HR- -LR 1/4" 1/8".062" PSI 30 PSI 1/2" $ ' $ F Radius PCU-125BR- -50 $ ' $ PCU-125BR- -SR $ ' $ PCU-125BR- -R 1/8".066".030" PSI 55 PSI 3/16" $ ' $ PCU-125BR- -LR $ ' $ PCU-125BR- -XR $ ' $ PCU-156BR- $ ' $ PCU-156BR- -R $ ' $ /32" 5/64".039" 155 PSI 60 PSI 3/8" PCU-156BR- -LR $ ' $ PCU-156BR- -XR $ ' $ PCU-187BR- $ ' $ PCU-187BR- -R 3/16" 1/8".031" PSI 35 PSI 1/2" $ ' $ PCU-187BR- -XR $ ' $ PCU-250BR $ ' $ PCU-250BR- - $ ' $ /4" 1/8".062" PSI 60 PSI 1/2" PCU-250BR- -R $ ' $ PCU-250BR- -LR $ ' $ PCU-312BR- $ ' $ /16" 3/16".062" PSI 45 PSI 5/8" PCU-312BR- -R $ ' $ PCU-375BR- $ ' $ /8" 1/4".062" PSI 35 PSI 3/4" PCU-375BR- -R $ ' $ F Radius PCU-250PB- - $ ' $ PCU-250PB- -R 1/4".159".046" PSI 55 PSI 5/8" $ ' $ PCU-250PB- -LR $ ' $ PCU-375PB- $ ' $ PCU-375PB- -SR 3/8".245".065" 125 PSI 50 PSI 3/4" $ ' $ PCU-375PB- -R $ ' $ PCU-500PB /2" 3/8".062" PSI 35 PSI 2" $ ' $ P4

5 F Radius PCU-125F- -50 $ ' $ PCU-125F- -SR $ ' $ PCU-125F- -R 1/8".066".030" PSI 100 PSI 1/4" $ ' $ PCU-125F- -LR $ ' $ PCU-125F- -XR $ ' $ PCU-156F $ ' $ PCU-156F- -R $ ' $ /32" 3/32".031" PSI 85 PSI 3/8" PCU-156F- -LR $ ' $ PCU-156F- -XR $ ' $ PCU-187F- $ ' $ /16".107".040" PSI 90 PSI 3/8" PCU-187F- -LR $ ' $ PCU-250FH- 1/4" 1/8".062" 265 PSI 105 PSI 1/2" $ ' $ PCU-250F $ ' $ PCU-250F- -R 1/4".160".045" 175 PSI 70 PSI 1/2" $ ' $ PCU-250F- -LR $ ' $ PCU-375F $ ' $ PCU-375F- -SR 3/8".245".065" 170 PSI 70 PSI 7/8" $ ' $ PCU-375F- -R $ ' $ PCU-468F- -50 $ ' $ /32" 5/16".079" PSI 60 PSI 1-1/8" PCU-468F- -SR $ ' $ PCU-500F- -50 $ ' $ /2".320".090" PSI 70 PSI 1-1/8" PCU-500F- -SR $ ' $ PCU-562F- -50 $ ' $ /16" 3/8".094" PSI 60 PSI 1-3/8" PCU-562F- -SR $ ' $ PCU-750F- 3/4".467".142" PSI 70 PSI 1-1/2" $ ' $ P5

6 Features and Speci cations for Polyethylene Tubing Linear Low Density Polyethylene or LLDPE s greatest advantage over any other low density polyethylene is its superior environmental stress crack resistance (ESCR). Environmental stresses that can shorten the service life of tubing includes: chemical exposure, aging, connection to barb-type ttings, or high vibration connections with compression ttings. All colors comply with FDA regulation 21 CFR (c) for food contact applications. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. * Greater tensile strength. * High burst pressure. * Superior stress and crack resistance. * Tasteless and odorless. * Puncture resistance. * Impermeable to some gasses and moisture. * Superior dielectric properties. * Lightweight * Push-in and compression ttings can be used with Polyethylene. Hardness Polyethylene -40 F to +150 F 3:1 Safety Factor To 28" Hg. 50 Shore D F Radius PCE-125PG- $ ' $ PCE-125PG- -SR $ ' $ /8".062".031" 305 PSI 120 PSI 1/2" PCE-125PG- -R $ ' $ PCE-125PG- -LR $ ' $ PCE-156PG- $ ' $ PCE-156PG- -SR $ ' $ /32".106".025" PSI 70 PSI 1" PCE-156PG- -R $ ' $ PCE-156PG- -LR $ ' $ PCE-250PG $ ' $ PCE-250PG- -R 1/4".170".040" 200 PSI 80 PSI 1-1/4" $ ' $ PCE-250PG- -LR $ ' $ PCE-312PG- $ ' $ /16".187".062" PSI 90 PSI 1-1/2" PCE-312PG- -R $ ' $ PCE-375PG $ ' $ /8".250".062" 190 PSI 75 PSI 2" PCE-375PG- -R $ ' $ PCE-500PG- $ ' $ PCE-500PG- -SR 1/2".375".062" PSI 55 PSI 2-1/2" $ ' $ PCE-500PG- -R $ ' $ PCE-625PG- $ ' $ /8".500".062" PSI 40 PSI 3" PCE-625PG- -R $ ' $ P6

7 Features and Speci cations for Nylon 11 Tubing Nylon 11 tubing can withstand higher temperatures, making it an ideal choice for a wide variety of applications. When compared to other Nylon resins this tubing allows for a lighter weight wall, greater exibility and smaller bend radius. It is also more corrosion resistant than other types of Nylon tubing because of its resistance moisture absorption. It s heat and UV stabilization makes it resistant to stress-cracking, so it works well in sunny areas. It is chemical resistant which makes it a good choice in areas where exposure to certain chemicals is a possibility. * Strong, lightweight and exible. * Dimensionally stable. * Heat and light stable. * Resistant to corrosion and stress cracking. * Push-in and compression ttings are suggested for use with Nylon 11 tubing. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. Hardness Nylon F to +200 F 4:1 Safety Factor To 28" Hg. 78 Rockwell R P7

8 F Radius PCN-125N- $ ' $ PCN-125N- -R 1/8".093".016" $ ' $ PSI 160 PSI 1/2" PCN-125N- -LR $ ' $ PCN-125N- -XR $ ' $ PCN-156N- $ ' $ PCN-156N- -R $ ' $ /32".106".025" 350 PSI 210 PSI 1/2" PCN-156N- -LR $ ' $ PCN-156N- -XR $ ' $ PCN-187N- $ ' $ PCN-187N- -R 3/16".138".025" PSI 160 PSI 5/8" $ ' $ PCN-187N- -LR $ ' $ PCN-250N- $ ' $ PCN-250N- -R 1/4".180".035" PSI 170 PSI 1" $ ' $ PCN-250N- -LR $ ' $ PCN-312N- $ ' $ /16".232".040" PSI 140 PSI 1-1/2" PCN-312N- -R $ ' $ PCN-375N- $ ' $ /8".275".050" PSI 150 PSI 1-1/2" PCN-375N- -R $ ' $ PCN-500N- $ ' $ PCN-500N- -SR 1/2".375".062" PSI 140 PSI 2-1/4" $ ' $ PCN-500N- -R $ ' $ PCN-625N /8" 1/2".062" PSI 100 PSI 3-1/4" $ ' $ 75 F Bend Radius PCN-125NHP-0 1/8".073".026" PSI 5/16" $ ' $ PCN-187NHP-0 3/16".109".039" PSI 7/16" $ ' $ PCN-250NHP- $ ' $ /4".150".050" PSI 9/16" PCN-250NHP- -R $ ' $ PCN-375NHP-0 $ ' $ /8".225".075" PSI 1" PCN-375NHP-0-R $ ' $ PCN-500NHP-0-SR 1/2".350".075" PSI 2" $ ' $ F Bend Radius PCN-156SN- 5/32".106".025" PSI 130 PSI 9/16" $ ' $ P8

9 Features and Speci cations for Polyvinylchloride (PVC) Tubing is non-reinforced exible PVC uses a non-phthalate plasticizer and is made of environmentally friendly material. is PVC tubing has a smooth interior and exterior which prevents sediment accumulation, making it well suited for the food and beverage, medical and pharmaceutical industries. Polyvinylchloride (PVC) Hardness Suggested Fittings -30 F to +150 F 3:1 Safety Factor 80A Durometer Barb * Resin Compliance: FDA for Food Contact CA Prop. 65 Meets USPVI * Clear for full ow viewing. * Barb ttings and clamps are suggested to be used with Polyvinylchloride (PVC) tubing. * Well suited for the food & beverage, medical and pharmaceutical industries. *Special Note - Only Non-Reinforced tubing below. Contact Polyconn for a questions on the Reinforced F Bend Radius PCPVC /8" 1/16".031" PSI 20 PSI 3/8" $ ' $ PCPVC /4" 1/8".062" PSI 25 PSI 1/2" $ ' $ PCPVC /16" 3/16".062" PSI 15 PSI 5/8" $ ' $ PCPVC /8" 1/4".062" 0 91 PSI 15 PSI 7/8" $ ' $ PCPVC /2" 3/8".062" 0 57 PSI 10 PSI 1-3/4" $ ' $ PCPVC /4" 1/2".125" 0 63 PSI 15 PSI 1-1/4" $ ' $ P9

10 Features and Speci cations for Kynar PVDF Tubing Kynar PVDF compound is an economical alternative to Te on (PTFE, PFA, and FEP) tubing for applications not requiring heat resistance. Kynar possesses excellent resistance to a wide range of chemicals. e high purity material is the ideal tubing for a variety of applications requiring an odorless and tasteless tube. Hardness Kynar PVDF -40 F to +180 F 4:1 Safety Factor To 28" Hg. 65 Shore D * Resists: Acids, Alcohol, Aliphatics, Aromatics, Chloride, Fungus, Mild Bases, Out-gassing, Radiation, UV Light * Sterilizable by Gamma Radiation or Ozone. * Resists fungal growth per MS 810B, Method 508 testing. * Well suited for medical, pharmaceutical, food & beverage, deionized water systems, semiconductor processing, wastewater treatment, pulp & paper F Bend Radius PCK-125K-0 1/8" 1/16".030" PSI 125 PSI 3/16" $ ' $ PCK-250K-0 $ ' $ PCK-250K-0-R 1/4".170".040" PSI 70 PSI 3/4" $ ' $ PCK-250K-0-LR $ ' $ 1, PCK-375K-0 3/8" 1/4".062" 0 $ ' $ PSI 70 PSI 1-1/4" PCK-375K-0-R $ ' $ 1, PCK-500K-0 $ ' $ PCK-500K-0-SR 1/2" 3/8".062" PSI 55 PSI 2-1/8" $ ' $ 1, PCK-500K-0-R $ ' $ 2, P10

11 Features and Speci cations for Static Dissipative Tubing Static electricity is a stationary charge of electricity resting on an object s surface. With plastic tubing, the charge is usually generated by friction on the exterior or interior of the tubing. e charge is typically localized. is means that a charge may exist on one part of the tube but not the entire tube. e spotty nature of the charge makes it much harder to detect. Furthermore, humans can only sense electrostatic discharge (ESD) greater than 3,500 electrostatic volts. A charge as low as 100 ESD volts can damage certain circuits meaning that electronics can be destroyed by ESD without the person even knowing it. Static Dissipative Polyurethane tubing is made from an ether-based polyurethane that is specially formulated to help control ESD. It should always be used in low humidity environments or when tubing is going to be near circuit boards. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. Static Dissipative Polyurethane Suggested Fitting Surface Resistivity -40 F to +165 F 3:1 Safety Factor To 28" Hg Barb 9.9x10 9 ohms/sq * Dissipates electrostatic charges with no chemical additives. * Contains no conductive llers and no particle emission. * Dissipative values are permanent and cannot be washed away. * Non-contaminating and non-outgassing. * Non-corrosive to electronic leads and components. * Barb ttings are the suggested ttings to use with the static dissipative polyurethane tubing F Radius PCU-156SDT- $ ' $ /32" 3/32".031" PSI 50 PSI 3/8" PCU-156SDT- -LR $ ' $ PCU-250SDT-4 1/4".160".045" PSI 60 PSI 3/4" $ ' $ P11

12 Features and Speci cations for Spatter Guard Tubing Spatter Guard SRT is made from a 94V0 polyurethane resin that has been speci cally formulated to resist against weld spatter without the need of an outer jacket. While this new tubing can be used in any application where you are currently using the jacketed version, it has a higher working pressure making it even better suited for industrial applications. is resin resists oils, greases, heat-aging, ultra-violet light, and is silicone and halogen free. Since it is polyurethane, it is kink resistant, abrasion resistant, and it can also be bonded and formed into retractable coils. Spatter Guard SRT works with push to connect and compression ttings without the need for boots or skiving saving you time and money. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. Diameter Tolerances Spatter Guard -40 F to +165 F 3:1 Safety Factor To 28" Hg ±0.005" * Protects tube from incidental weld spatter contact. * No skiving necessary. * Resistant to kink damage. * Broad range of chemical resistance. * Can be formed into retractable coils. * Ideal for use on machine tools, pneumatic plumbing systems, water and air lines on automatic or spot welders. * Push-in and compression ttings are the suggested ttings to use. Part # OD ID Standard Colors F Radius PCU-156SRT- $ ' $ PCU-156SRT- -R 5/32".093" $ ' $ PSI 105 PSI 9/16" PCU-156SRT- -LR $ ' $ PCU-156SRT- -XR $ ' $ 2, PCU-250SRT- $ ' $ PCU-250SRT- -SR 1/4".160" PSI 90 PSI 1" $ ' $ PCU-250SRT- -LR $ ' $ 1, PCU-375SRT- $ ' $ /8".245" PSI 85 PSI 1" PCU-375SRT- -R $ ' $ PCU-500SRT- -50 $ ' $ /2".320" PSI 80 PSI 1-1/8" PCU-500SRT- -SR $ ' $ P12

13 Features and Speci cations for Multi-Bore Tubing Multi-Bore Tubing is produced using polyurethane in a single extrusion. Unlike MCR (Multi-Colored Ribbon), it is made in one extrusion, which means the tube can only be made in a single color. Unlike MCR, Multi-Bore can t be separated cleanly and should not be used with push-in ttings. If you require more colors than are listed here, consider using MCR see page for more information. Multi-Bore Polyurethane Suggested Fitting -40 F to +125 F 3:1 Safety Factor To 28" Hg Barb * Two or more tubes extruded as a single piece, joined by a tough connecting web. * Mono-colored * One tube has an identi cation rib. * Ribbon tube con guration. * Ideal for applications requiring severe or constant exing. * Barb ttings are the suggested ttings to use with the multi-bore tubing. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. Part # OD ID Con guration Standard F PCMB2-125PB- $ ' $ /8" 1/16" PSI 75 PSI PCMB2-125PB- -LR TWIN TUBE $ ' $ PCMB2-250PB- $ ' $ /4".159" PSI 50 PSI PCMB2-250PB- -R TWIN TUBE $ ' $ P13

14 Features and Speci cations for Multi-Colored Ribbon Tubing Multi-Colored Ribbon tubing (MCR) is a bonded ribbon of multi-colored polyurethane tubing. Any time that you are routing two or more lines, MCR is the way to go. It offers faster installation times and eliminates the need for spiral wrap or jacketing. e proprietary bonding process allows the tubing to be separated without leaving any residue. is ensures a tight, leak free seal with push-in style ttings. MCR is a durable, cost-effective way to color code your tubing lines for identi cation, tracing or troubleshooting. MCR is available in a wide range of stock con gurations which are provided for you. Custom con gurations are available from 2 to 20 tubes. Contact Polyconn for more information about custom con gurations. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. 95A Multi-Color Ribbon UV Stabilized -40 F to +165 F 3:1 Safety Factor Yes To 28" Hg * Bond 2 to 20 tubes. * Use multiple colors in any combination. * Mix or match tube sizes. * Tubes can be stacked into many con gurations. * Heat bonding process allows you to easily hand separate tubing for routing. * Cost-effective way to color code your tubing lines for identi cation, tracing or troubleshooting. P14

15 Part # OD ID Con guration & Standard 75 F PCR2-125F PCR4-125F-100 PCR6-125F-100 PCR8-125F-100 PCR2-250F-100 PCR4-250F-100 PCR6-250F-100 PCR8-250F-100 PCR2-375F-100 PCR4-375F-100 1/8".066" 1/4".160" 3/8".245" TUBES TUBES TUBES TUBES TUBES TUBES TUBES TUBES TUBES TUBES Bend Radius 255 PSI 1/4" 175 PSI 1/2" 170 PSI 7/8" $ ' $ $ ' $ $ ' $ $ ' $ $ ' $ $ ' $ $ ' $ $ ' $ $ ' $ $ ' $ P15

16 Features and Speci cations for Drop Coil Tubing Polyurethane coils possess outstanding memory, a soft feel and superior exibility. ese coils are extraordinarily tough and resistant to abrasion, overstretching, kinking and repeated exing. Variations are easy. If you don't see the color or length that you want, just ask us. We can con gure these coils to perfectly match your requirements. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. UV Stabilized Drop Coil Tubing -40 F to +125 F 3:1 Safety Factor Yes To 28" Hg * Single or multi-bore ribbon tube con gurations available. * Numerous colors available. * Ideal for use with small air tools, nut runners, blow guns, robotic and pneumatic pick and place equipment. Coil diameter plays a very signi cant role in retractability. e smaller and tighter the coil diameter, the snappier and more retractable the coil becomes. Length: of a coil is usually a percentage of the total tubing length. It may be necessary to experiment with working lengths to produce a coil that can be stretched and used comfortably. Polyurethane features exibility allowing a working length of 80-90% the actual material length; nylon, a more rigid tubing, has a working length that is 67-75% the total tubing length. Retracted Length: Is the length of a coil not including pig tails. Retracted length or outer coil diameter may be important in applications where the coil rests over a pole or retracts into a box. Tails: Standard sized Polyurethane coils have two straight tails (8 and 16 ). Tails ease use of coils with diameters. Nylon tails are not standard-rather coils are produced from 100 (foot) bulk length coils, if tail length is required, please supply measurement for quote. P16

17 Part # OD ID Standard F Material Length Length Retracted Length PCD1-250PB10-1/4".159" PSI 45 PSI 10' 8' 5" 10' $ PCD1-375PB10-10' 8' 7.5" 10' $ /8".245" PSI 40 PSI PCD1-375PB25-25' 20' 22" 25' $ Part # OD ID Standard Colors Material F Length Length Length PCD1-250F10-1/4".16" 150 PSI 60 PSI 10' 8' 7" 10' $ Part # OD ID Standard Colors F Length PCD2-125PB7-1/8" 1/16" TUBES Length Retracted Length 160 PSI 65 PSI 7' 5' 6" 7' $ P17

18 Features and Speci cations for Flecoil Coiled Polyurethane with Reusable Fittings Flexcoil is the original tangle free coiled hose. I s made from polyurethane. Just like our other polyurethane tubing, it resists abrasion and kinking. Of course it always springs back to its original shape. Flexcoil is ideal for use with air tools, blow guns, impact wrenches and nailers. It s a great way to keep your work area organized and safe. Standard sized coils have two straight tails (8 and 16 ) to position tubing away from tools. Hardness Flexcoil -40 F to +125 F 3:1 Safety Factor To 28" Hg 95A * Extremely exible, kink resistant tubing with excellent memory. * Resin Compliance: NSF61, Meets UL94HB * Available with Rigid, Swivel or both ttings. * Ideal for tough air tool hose requirements. * Ideal for use with air tools, blow guns, impact wrenches and nailers. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. Part # Fitting Material Retracted Standard Coil OD ID Options Length Length Length Colors OD PCCF-250D2-10' 8' 7" 10' $ PCCF-250D3-15' 12.5' 9-1/2" ' $ /4" Swivel 1/4".160" 1-1/2" 150 PSI PCCF-250D4-20' 17' 12-1/2" ' $ PCCF-250D5-25' 20' 15-1/2" 25' $ PCCF-375D- 5' 4' 2-1/2" 5' $ PCCF-375D2-10' 8' 6" ' $ PCCF-375D3-1/4" Swivel 15' 12.5' 9-1/2" 3/8" 1/4" 2-1/2" 130 PSI 15' $ PCCF-375D4-20' 17' 13" 20' $ PCCF-375D5-25' 20' 16" 25' $ PCCF-562D2- RS 3/8" Swivel/Rigid 10' 8' 5-1/2" 10' $ PCCF-562D2-10' 8' 5-1/2" ' $ PCCF-562D3-15' 12.5' 8-1/2" 9/16" 3/8" 4-1/8" 135 PSI 15' $ /8" Swivel 6 27 PCCF-562D4-20' 17' 11" 20' $ PCCF-562D5-25' 20' 14" 25' $ PCCF-750D2-10' 8' 7" 10' $ PCCF-750D3-15' 12.5' 11-3/4" ' $ /2" Swivel 3/4".467" 4-1/2" 155 PSI PCCF-750D4-20' 17' 16-1/2" ' $ PCCF-750D5-25' 20' 23" 25' $ P18

19 Features and Speci cations for Flexeel Coiled Polyurethane Hose Flexeel Polyurethane Reinforced Hose is an excellent alternative to much bulkier rubber hoses. Extremely lightweight and tough, it is ideal for either outdoor or indoor use. Flexeel retains its exibility even in cold environments. UV Stabilized Flexeel -40 F to +165 F 4:1 Safety Factor To 28" Hg Yes * Withstans constant exing, even in subzero conditions. * Kink & abrasion resistant. * Much lighter than other comparably sized hoses. * Very small bend radius. * Resistant to chemicals, water, fuel, oil and fungus. * Mon-marring to furniture and auto nishes. *Special Note - Not all colors pictured above may be available, please call us for availability. denotes color code. To select color by code please refer to Standard Available Colors chart below or on page 2. Part # Fitting Material Retracted Standard Coil OD ID Options Length Length Length Colors OD PCCUIB-375F2 10' 8.5' 9" 10' $ PCCUIB-375F3 15' 12.5' 14.5" 1/4" Swivel 27 15' $ /8" 1/4" 1-3/4" 200 PSI PCCUIB-375F4 20' 17' 13" 20' $ PCCUIB-375F5 25' 21' 16" 25' $ PCCUIB-562F2 10' 8.5' 5-1/2" 10' $ PCCUIB-562F3 15' 12.5' 8-1/2" 3/8" Swivel/Rigid 27 15' $ /16" 3/8" 2-7/8" 200 PSI PCCUIB-562F4 20' 17' 11" 20' $ PCCUIB-562F5 25' 21' 14" 25' $ P19

20 Features and Speci cations for Spiral Wrap Spiral Wrap is made from a spiral cut of linear low density polyethylene (LLDPE) material. It easily wraps around tubing and allows for easy branching of contents. Part # OD ID Standard Colors Price PCTH $ ' $ PCTH-500-1/2" 3/8" 0 2 $ ' $ PCTH SR $ ' $ P20

21 Polyconn offers Push-In ttings in many different materials! Available Materials: Composite Plastic Nickel Plated Brass Stainless Steel D.O.T. Brass Polyconn the one-stop shop for your pneumatic needs.