Quick Change. The combination of design, function and systematics. Quick change system for instruments for ceramic, wax models and prosthetics
|
|
- Noah Horton
- 5 years ago
- Views:
Transcription
1 Quick Change The combination of design, function and systematics Carbon handle REF Quick change system for instruments for ceramic, wax models and prosthetics Design carbon handle esthetic and haptic Stainless blade holder with magnetic receptacle for perfect fixation of all blades All metal components and magnets are corrosionresistant Temperature resistance of instruments inside the handle: 80 C Single hand use with quick change system Individual indications for ceramic, wax models and prosthetics Easy control thanks to reduced range of instruments Clever system allows to find the suitable instrument quickly Troublesome screwing with keys is a thing of the past Blades can be adjusted at any position familiar working position is retained High safety thinks to immediate release of the heated blades Proper storage of sensitive ceramic blades Ceramic brushes can be perfectly stored in a hanging position Ceramic blades with high surface quality for outstanding gliding properties Holder REF / GB 3
2 The Quick Change system In the past technicians desks were frequently overloaded with instruments to be used in the fields of ceramic, wax models and prosthetics. Well-structured, clearly arranged and proper storage was impossible. When instruments were frequently exchanged (thread connection!) a key had sometimes to be used and the position of the inserts towards each other could not be freely adjusted. Quick Change was developed to put and end to these problems. Quick Change is a system consisting of a handle with integrated magnets and high-precision retaining sockets. This combination allows to take up and release the various inserts very quickly. The blade holder is suitable for 12 inserts (brushes, special and standard blades and adapter). The Greenstein ceramic spatula that are available on the market can be integrated into the Quick Change system with an especially developed thread adapter. Blades for ceramic applications Twin Point REF Contouring mamelons by drawing with the inner tip - accurate shaping and correction with the outer tip. Fissure tool REF For specific preparation of depth, e.g. of the central fissure Olive, serrated REF Serrated and smooth blade for separating Adapter with M4 thread REF Universal adapter to be used for standard pen-knife inserts
3 Croco, smooth REF Blade for separating and smoothening of excess material in the approximal region. Croco, serrated REF Blade for improved separating of slightly dried ceramic materials. REF REF REF Black bristles for relaxed working thanks to perfect contrast to ceramics. Proper storage in hanging position. REF REF REF Top-quality, golden brown natural hair (Kolinsky). Proper storage in hanging position.
4 Surface characteristics A special high luster finish on the surface of the ceramic blades ensures outstanding gliding properties of the ceramic materials.
5 Blades for wax models and prosthetics Blade according to Zahle REF Smoothening of the wax model - the material thickness allows for individual design of incisal edges. Probe 0.8 REF Shaping of occlusals. Probe 1.1 REF Shaping the outer contour of crowns. Blade, Fig. 4 REF Universal blade for modelling adaptation to the personal working technique is ensured.
6 Blade Fig. 3 REF Modelling the gumline more economic application of large quantities. Overview of instruments approx. dimensions in mm Twin Point REF Fissure tool REF Olive with teeth REF Croco, smooth REF Croco, serrated REF Adapter with M4 thread REF REF REF REF REF REF REF Ø 0.8 Ø Blade according to Zahle REF Probe 0.8 REF Probe 1.1 REF Blade Fig. 3 REF Blade Fig. 4 REF Holder w 102 x d 100 x h 75 mm, weight approx. 575 g REF Ø Carbon handle l 101 mm, Ø 8 mm REF Subject to changes
INSTRUCTIONS for fire lamps 1-8
INSTRUCTIONS for fire lamps 1-8 1. Lamp from wooden pen holder: Material used: Article Number Quantity:: Pendant lamp holder, 100cm lamp cable with ceiling rose and pendant lamp holder 116013 1 Wooden
More information3Insert the second rod no. 4
Yamato: Step-by-step 37 The stern block and searchlight control towers a b c d e f Recommended tools and materials Wood glue Sandpaper (no. 800 grain) Metal file Putty Craft knife For metal: Super Glue
More informationGolden angels in an elegant design
Golden angels in an elegant design The magic of advent these modern-looking, golden-gowned angels are simply perfect for giving your home a festive Christmas feel. Made using the clay-like FIMOair basic
More informationFinishing. Separating and grinding discs. Supercut ST separating discs. Supercut separating discs for ceramic
Separating and grinding discs Supercut ST separating discs maximum cutting efficiency minimal breakage risk excellent strength nylon reinforced quality Color: brown Recommended speed: 15000 min -1 Maximum
More informationPliers and instruments.
Pliers and instruments. Premium quality premium function. Dentaurum Online Shop shop.dentaurum.com 327 One program to cover all areas. Whether for removable orthodontics or for prosthetics, the Dentaurum
More informationBasic Assembly For Conventional Series 9000 Structural Panels
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Basic Assembly For Conventional Series 9000 Structural Panels NOTE: Assembly directions for curved panels are the same as standard panels. Tools
More informationCannulated Screws Ø 3.5 mm / 4.5 mm
Cannulated Screws Ø / 4.5 mm Table of contents Implants Ø 4 Implants Ø 4.5 mm 6 Operation technique - Ø Cannulated Screws 9 Reduce fracture and insert guide wire 9 Determine the screw length 9 Drilling
More informationThermal Wire Stripper
Thermal Wire Stripper Thermal Wire Stripper Blade not included Thermal wire stripper that ensures clean-cut removal of wire insulation High stripping perfmance ensures clean cut through highly heat-resistant
More informationThis lecture contains four sections as reading information.
Sample Preparation: The Backloading Technique This lecture contains four sections as reading information. Basic XRD Course 1 Sample Preparation: The Backloading Technique Basic XRD Course 2 Sample Preparation:
More informationTorch Consumables. Air-Cooled Torch Systems Wire Feeder Wire Guiding PRÄZISION. For following torch systems:
Torch Consumables Air-Cooled Torch Systems Wire Feeder Wire Guiding PRÄZISION. For following torch systems: Power Joint Power Clutch Wire Select Frontpull Document no.: DOC-0135EN Revision: sks1210.en.2.a.bp
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationMaterial Used Article Number Quantity
Instruction S019K009 Concrete Etagere 1. Etagere Material Used Article Number Quantity Metal Etagere Construction Kit Classic, approx. 330 mm, handle approx. ø 45 x 5 mm, silver coloured, 9 parts Casting
More informationPneumatic Robot arm/digger
1 0 6. 1 8 6 Pneumatic Robot arm/digger Please Note The OPITEC range of projects is not primarily intended as toys for young children. It is for teaching, designing and making to ensure that pupils experience
More informationBK-Medent. BK-Medent
2008 BK-Medent BK-Medent BK-Medent www.bkmedent.com Porcelain Plate Ez-Master M (Auto-Mixing Plate) Ez-SingleM (Auto-Mixing Plate) B-009M (Auto-Mixing Plate) Ez-Master & Ez-Single (Auto-Mixing Plate) R-Mixing
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationAnswer Power Beam and Boundary Screen
Answer Power Beam and Boundary Screen 5/16 MAGNETIC 3/8 If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by
More informationINSTRUCTIONS. GP Catamaran Mainsheet System. Description and Features
INSTRUCTIONS GP Catamaran Mainsheet System N5W4983 Bluemound Road Pewaukee, WI 5307 U.S.A. Telephone: (6) 69-330 Fax: (6) 70-5780 Web: www.harken.com Email: harken@harken.com Description and Features Low
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL MODELS SR22 AND SR22T CHAPTER 56-30: DOOR GENERAL. Door 56-30: DOOR. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Door CHAPTER 56-30: DOOR GENERAL 56-30: DOOR 1. General The cabin door windows are manufactured of acrylic and adhesive bonded to the door structure. Replacement is accomplished
More informationJewellery in a concrete look made out of FIMOair light
Jewellery in a concrete look made out of FIMOair light Urban lifestyle design Concrete is a highly popular material at the moment for furniture, home deco accessories and jewellery. Casting concrete yourself
More informationHow to Mount a Moto Accessories MV Agusta F4 Hugger in Less than 30 Minutes.
How to Mount a Moto Accessories MV Agusta F4 Hugger in Less than 30 Minutes http://idealcycle.com/mv_agusta Materials and Tools: 13 10 4 1 3 2 5 11 6 15 17 14 12 9 8 16 7 1. Electric drill 2. Tap drill
More informationRR Series TM USER GUIDE. For Vinyl Express R Series Cutters
RR Series TM USER GUIDE For Vinyl Express R Series Cutters Thank you for choosing an R Series cutter from SignWarehouse, Inc. Before using your cutter, we suggest you read this guide. It will guide you
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationSTYLE BAR & TONNEAU COVER INSTALLATION
STYLE BAR & TONNEAU COVER INSTALLATION INSTALLATION MANUAL: 2005 to '09 Mustang P/N: 10-8002-C12071B Saleen Performance, Inc. 1225 East Maple Rd., MI 48083 800-888-8945 www.saleen.com 1 IF YOU ARE NOT
More informationComprehensive Instructions for Zirconia Solutions
Comprehensive Instructions for Zirconia Solutions Compatibility Chart of CZR & CZR Press CZR CZR Press CZR Press LF Framework Zirconia Framework KATANA / Nobel Procera Zirconia / Others Pure Zirconia No
More informationDesigned for Vectric by Michael Tyler. Show how crazy you are about your significant other with this free Crazy Heart project!
Project Tutorial Compatible with: (or greater) and (or greater) Sample Carved with: ShopBot Buddy PRSalpha BT48 www.shopbottools.com Featuring compatibility with nearly all CNC Machines Show how crazy
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationThe Percutaneous Reduction Forceps Technique Guide
The Percutaneous Reduction Forceps Technique Guide Indications + Product Overview Introduction The Percutaneous Reduction Forceps The Percutaneous Reduction Forceps facilitate standard technique for fixation
More informationThermo fan. Important Notice:
105.434 Thermo fan Important Notice: Beware of fire, never leave a burning candle unattended!! Please Note The OPITEC range of projects is not intended as play toys for young children.they are teaching
More informationNORITAKE SUPER PORCELAIN NORITAKE SUPER PORCELAIN NORITAKE SUPER PORCELAIN EX-3 FULL KIT ( POWDER OPAQUE ) NORITAKE SUPER PORCELAIN NORITAKE
EX-3 FULL KIT ( POWDER OPAQUE ) The fabrication procedures for EX-3 are remarkably easy. Its outstanding features are made possible because of its very fine particle size. EX-3 is superior to other dental
More informationPRIME SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
PRIME SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationSelf Feeder. Soldering-Related Equipment and Materials. V-Groove Maker. Features. Packing List. Specifications. Option
Self Feeder V-Groove Maker Features Minimize solder and flux splash Cutting a V-groove on the solder surface enables the release of gas pressure generated by the flux, thereby suppressing splash. HAKKO
More informationTitanium. The most biocompatible metal. Dentaurum. shop.dentaurum.com
. The most biocompatible metal. Dentaurum Online Shop shop.dentaurum.com 207 High-tech in dentistry. Titanium is not only used in the aerospace industry but also in many different areas in medicine. It
More informationSellotape Dispenser E112134#1
2. 4 Sellotape Dispenser Please Note The OPITEC range of projects is not primarily intended as toys for young children. It is for teaching, designing and making to ensure that pupils experience a range
More informationElectronic magnetic switches
Electronic magnetic switches Electronic magnetic switches The from Bernstein are based on two different physical operating principles: the Hall effect and magneto-resitive (MR) effect. The sensors are
More informationDENTAL PORCELAIN NORITAKE SUPER PORCELAIN EX-3 FULL KIT PST. 16 colors. 16 colors 3 colors 4 colors 4 colors 2 colors 11 colors
SUPER PORCELAIN EX-3 FULL KIT PST The fabrication procedures for SUPER PORCELAIN EX-3 are remarkably easy. Its outstanding features are made possible because of its very fine particle size. SUPER PORCELAIN
More information1Take the keel (3) and
1 The hull and the bridge 1Take the keel (3) and apply PVA wood glue in the second slot from the left: a toothpick may make it easier. Take care: the left end is the one that has a projection. THE HULL
More informationVehicle with robotic arm
1 0 6. 2 0 2 Vehicle with robotic arm Please Note The OPITEC range of projects is not intended as play toys for young children.they are teaching aids for young people learning the skills of Craft, Design
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SHOWER STUDIO GLIDE Englefield has a history of making superb showers and their popularity is testament to their quality and affordability. It s the details that Englefield cares
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationVenetian masks. Venetian masks
Venetian masks These wonderful masks from the Canevale di Venezia are both beautiful and mysterious at the same time. Whether elegant-looking in black and gold or conspicuously colourful, you can custom-make
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationCUTTER BLOCKS. Knives HSS & Carbide Tipped
C CUTTER BLOCKS Knives HSS & Carbide Tipped 185 UNIVERSAL TOOLHEAD High tensile steel body toolhead with 2 teeth Supplied with 12, 24 or 36 sets of solid HSS knives Custom profiled knives available on
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationTuff Tread. 502 W. Montgomery STE 120 Willis, TX PH: (800) FAX: (888)
Motor Brush Holder Assembly Installation Instructions Never use a sanding stone or comm stone on the commutator of a Noramco Fitness Treadmill motor. The commutator of a motor that has been properly broken
More informationModel No. MLT100 TABLE SAW 255MM
Page 1 / 6 Page 2 / 6 Page 3 / 6 Page 4 / 6 Page 5 / 6 Page 6 / 6 Page 1 / 8 001 JM27000001 HEX.BOLT M10X35 4 002 JM27000002 SPRING WASHER 10 4 003 JM27000003 FLAT WASHER 10 4 004 JM27000004 CROSS HEAD
More informationTorch Consumables. - air cooled torch systems - Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select
Torch Consumables Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select - air cooled torch systems - Power Joint Power Joint Lite Frontpull 8i Power Clutch Frontpull 7 Wire Select
More informationOverview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools
8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,
More informationChief s Shop: Simple Woodworking Bench
Chief s Shop: Simple Woodworking Bench Be sure to read the instructions and review the illustrations and accompanying video for this project BEFORE you start. Follow ALL SAFETY GUIDELINES AND RECOMMENDATIONS
More informationFancy Keepsake Box. Premium Plan. In this plan you ll find: America s leading woodworking authority
America s leading woodworking authority Premium Plan In this plan you ll find: Step-by-step construction instruction. A complete bill of materials. Construction drawings and related photos. Tips to help
More informationZ14 MANUAL TÉCNICO TECHNICAL MANUAL
Z14 MANUAL TÉCNICO TECHNICAL MANUAL Z14 TECHNICAL INSTRUCTIONS CONTENTS: 1.- Opening the machine 2.- Changing the bridge 3.- Checking if cleaning and greasing is needed 4.- Puller runner bolts 5.- Tray
More informationV4 Premium Kit. Prusa i3 Build Guide
V4 Premium Kit Prusa i3 Build Guide Hi! Congratulations on your purchase of the DIYElectronics.co.za Prusa I3 kit, the best South African 3D Printer Kit! Hopefully this should serve as complete guide to
More informationOWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM
The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS III system consists of three
More informationINSTALLATION INSTRUCTIONS Accessory MOTORCYCLE BED P/N 08L26-SJC-100A Application 2011 RIDGELINE Publications No. AII 43440 Issue Date JUNE 2010 PARTS LIST Left tube 6 Hex bolts Right tube (with label)
More informationINCRA INCRA TS-III ULTRA OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control
INCRA Patented Precision Woodworking Tools The only table saw fence with Automatic Positioning Control R R INCRA TS-III ULTRA OWNER S MANUAL Please read this manual before use and keep it at hand for easy
More informationINSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
More informationGSE GROUND SYSTEM. Ground Mounting System for framed PV modules. INSTALLATION MANUAL GSE GROUND SYSTEM Ground Mounting System for framed PV Modules
G R O U P E S O L U T I O N E N E R G I E GSE GROUND SYSTEM Ground Mounting System for framed PV modules INSTALLATION MANUAL GSE GROUND SYSTEM Ground Mounting System for framed PV Modules V 2.1 WWW.GSEINTEGRATION.COM
More informationCHAINSAW SHARPENER MODEL: ECSS-1
CHAINSAW SHARPENER MODEL: ECSS-1 Part No: 3402075 ASSEMBLY & INSTRUCTION MANUAL LS0409 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that
More informationPliers I Instruments. Premium-Line pliers / Fixed appliance technique Premium-Line pliers / Removable appliance technique. Page 366.
Premium-Line pliers / Fixed appliance technique Premium-Line pliers / Removable appliance technique Page 366 Page 374 362 Premium-Line pliers. Premium quality premium function. Dentaurum Online Shop shop.dentaurum.com
More informationEXERCISE SPECIFIC ARMAMENTARIUM LIST
EXERCISE SPECIFIC ARMAMENTARIUM LIST Full Metal Crown Prep: 1. Nitrile gloves 2. Plastic over-gloves 3. White coat or scrubs 4. Masks 1. Thin tip explorer (Hu -friedy XP23/ONC15 or XP23/QW explorer + probe)
More informationEntrance Cabinet Plans
Entrance Cabinet Plans www.andrewharriswoodwork.com Page 1 of 19 Introduction I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then
More informationPORTA~TRACE. GAGNE, INC. 41 Commercial Dr. Johnson City, New York Phone: Fax: ASSEMBLY INSTRUCTIONS
PORTA~TRACE GAGNE, INC. 41 Commercial Dr. Johnson City, New York 13790 Phone: 1-607-729-3366 Fax: 1-607-729-7644 ASSEMBLY INSTRUCTIONS PORTA~TRACE MODEL 2436T LIGHT TABLE PORTA~TRACE MODEL 3648T LIGHT
More informationInstructions: Beginning Stained Glass
BASIC TYPES OF GLASS Cathedral - clear or colored see through glass Wispy/Translucent - clear glass with opal streaks Opal - glass that allows light through but cannot be seen through I. CUTTING AND BREAKING
More informationKMFS. User Manual. sharpener SHARPENING KIT FOR SYMMETRICAL KNIFE SHARPENING KMFS SHARPEN YOUR KNIVES LIKE A PRO - 1 -
User Manual SHARPENING KIT FOR SYMMETRICAL KNIFE SHARPENING sharpener Name: User Manual Sharpening system with accurate angle retention Date: 18 August 2017-1 - Document version: Manual_ sharpener_2017_v1
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationMICROWAVE MOISTURE SENSOR WITH WIRELESS DATA TRANSMISSION FL-WAPP
- 1 MICROWAVE MOISTURE SENSOR WITH WIRELESS DATA TRANSMISSION FL-WAPP INDEX General Function Description P. 2 Technical Data P. 2 1. Software Installation P. 3 2. System Integration P. 3 2.1 Sensor as
More informationCoffee table with recessed tray
Coffee table with recessed tray Dinner is served Coffee table with recessed tray This coffee table has it all: it contains a recessed tray, so that you can treat your guests to various delicacies. 1 Introduction
More informationDISTAL RADIUS PLATES 3.5 mm / ANGULARLY STABLE. Distal radius plates 3,5 mm / angularly stable. Locking bone screws. Cortical bone screw
SURGICAL NÁSTROJE TECHNIQUE PRO ARTROSKOPII DISTAL INSTRUMENTS RADIUS PLATES FOR ARTHROSCOPY 3.5 mm / ANGULARLY STABLE Distal radius plates 3.5 mm / angularly stable Indication The plates are used for
More informationThomas Scientific Swedesboro, NJ U.S.A.
Thomas Scientific Swedesboro, NJ 08085-0099 U.S.A. Wiley Mini Mill 3383-L10 (115 V, 60 HZ) USE AND CARE OF CATALOG NUMBER: 3383-L10 Wiley Mini Mill (115 V, 60 HZ) PRELIMINARY 1. Mill has been properly
More informationHOSTESS TROLLEY U.K.
SERVICE MANUAL HOSTESS TROLLEY U.K. 0312 200 15110 - HL6200DB (Mahogany) 0312 200 15210 - HL6200LB (Teak) 0312 200 15227 - HL6200GO ( Golden Oak) Service Hints Technical Data Wiring Diagram Exploded Views
More informationCircular Saw Machines
AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB Circular Saw Machine Series for Bar Material CMB 75/100/150 CNC Circular saw machines for use of carbide tools The ideal solution for sawing bar material
More informationThe Phoenix. Professional Quilting Frame. Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.
The Phoenix Professional Quilting Frame Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.1 1 The Phoenix Professional Quilting Frame Parts List Box 1...3 Box
More informationHOW TO MAKE A COMPOSITION ZISA DOLL
HOW TO MAKE A COMPOSITION ZISA DOLL WITH STUFFED FELT BODY AND 3D PRINTED HANDS AND HEAD A composition doll is made of different materials, in this case the body and limbs are sewn in felt and then padded,
More informationMOTOR & BULK HEAD. A Manual for Repair and Maintenance Technicians
MOTOR & BULK HEAD A Manual for Repair and Maintenance Technicians CAUTION This manual is designed to help technicians who are already experienced in workshop procedures and know how to handle tools. Only
More informationLS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationINSTALLATION INSTRUCTIONS Accessory MOTORCYCLE BED P/N 08L26-SJC-100A Application 2010 RIDGELINE Publications No. AII 42145 Issue Date AUG 2009 PARTS LIST Left tube 2 Washers 2 Well nuts Right tube (with
More informationREEL BLADE / BED KNIFE ADJUSTING & SHARPENING
Here s a QR code image that can be used to access this document on a portable device. Reel Mower Cutting Fundamentals The reel mower s cutting ability is the result of the corner edges of the reel blade
More informationV 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic. Panel rip and crosscut saws. It s the result that matters
V 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic Panel rip and crosscut saws It s the result that matters V 91 basic - 5,7 Touch-Screen Display of the current cutting height and input field
More informationTools Required. * When installing on a fire door, please see instructions below. *
CL615 Tubular Mortice Latch with Code Free option CL615 Tubular Mortice Latch with Code Free option Number relating to picture Item 1 Front Plate and handle * 2 Back Plate and handle * 3 Neoprene seals
More informationinstruments APEX SERIES INSTRUMENTS: OVERVIEW
APEX SERIES INSTRUMENTS: OVERVIEW 223 APEX Series instruments are manufactured using high-tech equipment and high-end processing to ensure our customers get the highest quality product at a very economical
More informationTechnique Guide. Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5.
Technique Guide Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5. Table of Contents Introduction Quadrilateral Surface Plates 3.5 2 AO Principles 4 Indications 5 Surgical Technique
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationMODEL T21973 METAL BLADE GUIDE SET INSTRUCTIONS
MODEL T21973 METAL BLADE GUIDE SET INSTRUCTIONS Introduction (Figure 1) These Euro-style blade guides replace the blade guides on the G0531, G0531B, G0566, G0568, and G0569 bandsaw. Tools Needed Wrench
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationEraser Conveyor Belt Cleaning System IWARNING Always obey all applicable safety rules. Be sure all power to the conveyor has been disconnected and con
INSTALLATION GUIDE LIB-CP-REA-03-01 Rev. 10 Eraser Conveyor Belt Cleaning System ARGONICS Eraser Conveyor Belt Cleaning System IWARNING Always obey all applicable safety rules. Be sure all power to the
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationShorten Screws without a Burr!
Tips & Tricks www.youtube.com/user/breitfeldschliekert Fitting Tool for Rimless Frames 22 Shorten Screws without a Burr! Works as a Nut Driver and Screw utter in one Tool No. 2268 00 for screws with 1.2
More informationProsthetics. Well-proven product quality. Dentaurum. shop.dentaurum.com
. Well-proven product quality. Dentaurum Online Shop shop.dentaurum.com 249 From impressions to grid strengtheners. A diverse range of products available for impression taking and model casting to various
More informationRobert Bosch GmbH. Lounge light fixture
Lounge light fixture Nice and relaxing Lounge light fixture Light has an important effect on mood. This cool light fixture is perfect for creating a cosy lounge atmosphere. 1 Introduction This cool light
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationPart 1: Operating Instructions Cl. 271 to 274
Contents Page: Preface and General Safety Notes Part 1: Operating Instructions Cl. 271 to 274 1. Product Description 1.1 Short Description and Proper Use..................... 5 1.2 Technical Data................................
More informationINSTRUCTIONS FOR USE B2 FORM KNURLING TOOL
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. B2 Tools... 6 2.1 Technical Data... 6 2.2 Overview: Main components... 7
More informationCOFFEE TABLE WITH RECESSED TRAY
COFFEE TABLE WITH RECESSED TRAY Why not treat your guests to a tray laid with delicacies and then remove it from sight in your new coffee table. There's no easier way to show that you are a thoughtful
More informationFAR EAST TOOLS CATALOG 5700Z BERGEON MODEL
No: JK01 GLASS & CASE PRESS (LIGHTER) No: JK03 WOOD HOLDER PRESS MACHINE No:JK02 SCREW CASE BACK CLOSING PRESS LIKE 5700Z BERGEON MODEL No: JK04 POCKET SIZE BACK CASE OPENER Page:1 No: JK05 CASE FIXING
More informationHandling instructions
Hand Shear Model CE 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More informationCLASSIC SERIES PRICE LIST 18.1 Recommended retail price
CLASSIC SERIES PRICE LIST 18.1 Recommended retail price CLASSIC SERIES Soldering Pencil Soldering Irons Temperature-controlled Soldering Iron Soldering Iron with Solder Feed 14ST 30ST 40ST 65ST SL 2020
More informationtools cutters 524 orderline: larsson side cutters, larsson end cutters tools
cutters larsson side cutters, larsson end cutters Side Cutters: 999 720 Diagonal cutters, pointed jaws (3054) flush cut for wire Ø 0.35-1.00mm 29.75 999 721 Diagonal cutters pointed jaws (3055) regular
More informationArtsign Adjustable Flat Roof Mount System
With the latest technology in hand, Artsign Solar is always in the forefront of solar mounting system PV market. We offer the quality product solution and comprehensive service to meet the increasing market
More informationOWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM
The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS II system consists of three
More information