Promaster 260Z & 250Z

Transcription

1 Promaster 0Z & 0Z Parts Manual Models 0-0Z 00-0Z 0-0Z 0-0Z 0-0Z 0-0Z 0-0Z 0-0Z 000A /00 Supercedes 000 Printed in USA

2 THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. PRODUCT REGISTRATION PRODUCT REGISTRATION A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Gravely replacement parts. The replacement of any part on this vehicle with anything other than a Gravely authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Gravely disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps:. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two.. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. TO SPEED PARTS ORDERING:. Know the model and serial numbers of your unit.. Know the part number required.. Know the quantity required.. Know the part description. /00

3 TABLE OF CONTENTS PROMASTER 0Z & 0Z MODELS Model 0 HP Kohler with 0" Mower Deck Serial No and up Model 00 HP Kohler with 0" Mower Deck Serial No and up Model 0 HP Robin with 0" Mower Deck Serial No and up Model 0 HP Kohler with 0" Mower Deck Serial No and up Model 0 0 HP Briggs & Stratton with 0" Mower Deck Serial No and up Model 0 HP Robin with 0" Mower Deck Serial No and up Model 0 HP Kohler with " Mower Deck Serial No and up Model 0 (International) HP Kohler with 0" Mower Deck Serial No and up REFERENCE TABLE Hardware descriptions are given in decimals. Decimals to Fractions.0 /. /. /. /. /. /.0 /.0 /. /. /. /. /. /. /.00 /.00 DECALS Decals... MAIN FRAME Frame... Seat and Hood Frame... Hood...0 POWER PLANT Engine and Clutch... Fuel Tanks... DRIVE TRAIN Transmission... Motors and Wheels... Brakes...0 HYDRAULICS Tank and Filter... Lift Valve and Cylinder... Pump to Tank Circuit... Deck Lift Circuit... Motor to Pump Circuit... Hydraulic Diagram... OPERATOR CONTROLS Steering Controls - Upper... Steering Controls - Lower...0 Deck Lift... Control Panel... ELECTRICAL Continuity Diagrams... Wiring Diagrams... Electrical System...0 Hood and Panel Switches... MOWER DECKS " Deck and Spindles... 0" Deck and Spindles... 0" Deck and Spindles... " Discharge Chute and Baffles... 0" Discharge Chute and Baffles... 0" Discharge Chute and Baffles...0 Belts, Idlers and Blades... Rollers... Mounting Arms and Belt Guards... Mounting Brackets... 0/00 Copyright Ariens Company

4 DECALS Model 0, 00, 0, 0, 0, 0, 0, 0 PF0 0/00

5 DECALS Model 0, 00, 0, 0, 0, 0, 0, 0 0 Hrs. 00 Hrs. 0 Hrs. 0 Hrs. 0 Hrs. PF 0/00

6 DECALS Model 0, 00, 0, 0, 0, 0, 0, 0 PF 0/00

7 DECALS Model 0, 00, 0, 0, 0, 0, 0, Decal Set PM0Z 00 Decal Set Mower Decks 000 Decal, GRAVELY Belt Diagram 000 Decal Set Gravely Logo (0, 00, 0, 0, 0, 0) 000 Decal-PM 0Z Logo 000 Decal-PM 0Z Logo 000 Decal-" Gravely Logo 000 Decal-Hot Surface 0/00

8 FRAME Model 0, 00, 0, 0, 0, 0, 0, PF 0/00

9 FRAME Model 0, 00, 0, 0, 0, 0, 0, Frame (Serial Numbers 0000 to 000) 0 Frame (Serial Numbers and up) 0 Axle-Front (0, 00, 0, 0, 0, 0, 0) 0 Axle-Front (0) 0000 Bushing-Flange.00 x. x. x Fitting-Lube.- x Pin-Axle 000 Spacer 000 Nut-Locking Screw-Tapping.- x. 0 Cover-Axle Button Bumper 000 Washer-Flat-Steel. x. x.0 0 Panel-Inspection 00 Mount-Inspection Panel 000 Bolt-Round Head Square Neck.- x.00 Grade 000 Nut-Locking-Nylon.- 0 Step-Ingress 0000 Bolt-Round Head Square Neck.- x. Grade 0000 Nut-Locking-Nylon.- 00 Plate-Kick 0 0 in Strip-Cowl 0 Channel-Cross 0 Bumper-Seat 0 Bushing-Sleeve Steel. x. x Washer-Flat-Steel. x. x Bolt-Hex.-0 x. Grade 000 Nut-Locking-Center Bolt-Serrated Flange Washer Head.- x Nut-Retainer.- x. 00 Cover, Cylinder Rod End Screw-Tapping.-0 x.0 Hex Washer Head 0/00

10 Model 0, 00, 0, 0, 0, 0, 0, 0 SEAT AND HOOD FRAME PF 0/00

11 SEAT AND HOOD FRAME Model 0, 00, 0, 0, 0, 0, 0, Seat-Suspension (0, 00, 0, 0, 0, 0, 0) 0000 Seat- Suspension (0) 000 Nut-Locking-Center M Washer-Flat-Steel. x. x.0 00 Weldment- Hood Frame (0, 00, 0, 0, 0, 0, 0) 0000 Weldment - Seat Frame (0) 0 Bushing-Flange. x.0 x. x.00 0 Bumper-Seat 0 Bushing-Sleeve. x. x Washer-Flat-Steel. x. x Bolt-Hex.-0 x. Grade Nut-Locking-Center Rod-Seat Frame Pivot 000 Ring-Retaining-External.00 x Rod-Prop (0, 00, 0, 0, 0, 0) 0000 Screw-Tapping.-0 x.0 Hex Washer Head (0, 00, 0, 0, 0, 0, 0) 0000 Clip (0, 00, 0, 0, 0, 0, 0) 0 Bushing-Sleeve. x. x. 000 Washer-Flat-Steel. x.0 x AR Kit-Damper w/hardware (0, 00, 0, 0, 0, 0, 0) 000 AR Kit-Knob ( per bag) AR Kit-Roller ( per bag) 000 AR Kit-Spring Cable ( per bag) 000 AR Kit-Arm Pad ( per bag) 0000 AR Kit-Adjuster ( per carton) 000 AR Kit-Cushion ( per carton) 0 Weldment-Seat Pivot Plate 0000 Bolt-Rib Neck.- x Nut-Locking-Top-Flange in. Tape -VHB F 0/00

12 HOOD Model 0, 00, 0, 0, 0, 0, 0, PF 0 0/00

13 HOOD Model 0, 00, 0, 0, 0, 0, 0, 0 0 Hood (0, 00, 0, 0, 0, 0, 0) 0 Screen-Hood (0, 00, 0, 0, 0, 0, 0) 0000 Screw-Tapping.-0 x.0 Hex Washer Head (0, 00, 0, 0, 0, 0, 0) in Seal-Trim-Lok Bulk.0 Bubble (0, 00, 0, 0, 0, 0, 0) in Seal-Trim-Lok Bulk.0 Bubble (0, 00, 0, 0, 0, 0, 0) in Seal-Trim-Lok Bulk.0 Bubble (0, 00, 0, 0, 0, 0, 0) in Seal-Trim-Lok Bulk.0 Bubble (0, 00, 0, 0, 0, 0, 0) in Seal-Trim-Lok Bulk.0 Bubble (0, 00, 0, 0, 0, 0, 0) in Seal-Trim-Lok Bulk.0 Bubble (0, 00, 0, 0, 0, 0, 0) Screw-Tapping.- x.0 Hex Washer Head (0, 00, 0, 0, 0, 0, 0) 0 Hood Support Left-Hand (0, 00, 0, 0, 0, 0, 0) 0 Hood Support Right-Hand (0, 00, 0, 0, 0, 0, 0) 0 Bumper-Rear 000 Bolt-Hex.- x.00 Grade (0, 00, 0, 0, 0, 0, 0) 000 Bolt-Hex.- x.0 Grade (0) 000 Nut-Locking-Center Screw-Tapping.- x. Hex Washer Head 0000 Latch-Rubber (0, 00, 0, 0, 0, 0, 0) 000 Screw-Machine 0- x.0 Hex Washer Head (0, 00, 0, 0, 0, 0, 0) 000 ScrewMachine 0- x.0 Hex Washer Head (0, 00, 0, 0, 0, 0, 0) Bolt-Round Head Square Shank.-0 x.0 Grade (0, 00, 0, 0, 0, 0, 0) 0000 Nut-Locking-Nylon.-0 (0, 00, 0, 0, 0, 0, 0) 000 Bracket-Screen Support (0, 00, 0, 0, 0, 0, 0) 0 Weldment, Plenum (0, 00, 0, 0, 0, 0, 0) 0/00

14 Model 0, 00, 0, 0, 0, 0, 0, 0 ENGINE AND CLUTCH 0 see "Fuel Tanks" A 0 0 PF 0/00

15 ENGINE AND CLUTCH Model 0, 00, 0, 0, 0, 0, 0, Seal-Kohler to Adapter (0, 00, 0) 000 Seal-Foam Robin to Plenum (0, 0, 0) 000 HP-Kohler Command Vertical (0, 00, 0) 000 Engine-Robin EH.V (0, 0) 000 Engine-Briggs & Stratton Vanguard 0HP (0) 0000 Muffler-Kohler CV-CV (0, 00, 0) 000 Muffler (0, 0, 0) 000 Muffler (0) 0000 Heat Shield CV- (0, 00, 0, 0, 0) 000 V-Belt HA-Section.0 x. 000 Screw-Tapping w/washer 000 Screw-Tapping Hex-Washer-Head.- x Bolt-Hex.- x. Grade 000 Nut-Locking-Center Pulley-. DIA x. Bore 0000 Key-Square. x.00 x. 000 Electric Clutch 0000 Washer-Flat-Steel. x. x Washer-Locking. x Bolt-Hex.-0 x.00 Grade 0000 Anchor-Clutch 0 in Gas Line-Bulk /" ID 000 Hose-Clamp 0 Cock-Oil Drain 0 0 Adapter-Oil Drain 0 in Gas Line-Bulk /" ID 00 Air Filter (0, 00, 0) 00 Air Filter (0, 0, 0) 0000 Air Filter (0) 000 Fuel Filter (0, 00, 0) 000 Fuel Filter (0, 0, 0) 000 Fuel Filter (0) 00 Oil Filter (0, 00, 0) 000 Oil Filter (0) 00 Spark Plug (0, 00, 0) 00 Spark Plug (0, 0, 0) 00 Spark Plug (0) 00 Element, Precleaner (0, 00, 0) 000 Heat Shield-Robin (0) 0000 Washer-Lock. x.0 Regular (0, 0, 0) 000 Nut-Hex M-. (0, 0, 0) Bolt-Hex M-. x 0 (0, 0, 0) 000 Screw-Tapping With Washer (0) 0000 Screw-Tapping.-0 x.0 (0) 000 Bolt-Hex.- x. Grade (0, 0, 0) 000 Bolt-Hex.- x. Grade (0, 0, 0) 000 Nut-Locking-Nylon.- (0, 0, 0) 0000 Nut-Locking-Nylon.- (0, 0, 0) 000 Bolt-Hex.- x.0 (0, 0, 0) 000 Screw-Cap.- x. (0) 0000 Washer-Lock. x.0 (0) 0/00

16 Model 0, 00, 0, 0, 0, 0, 0, 0 FUEL TANKS 0 0 see "Engine and Clutch" A PF0 0/00

17 FUEL TANKS Model 0, 00, 0, 0, 0, 0, 0, Fuel Tank Right-Hand 0000 Bolt-Hex.- x. Grade 0000 Washer-Locking. x Washer-Flat-Steel. x. x.0 0 in Gas Line-Bulk /" ID 000 Hose-Clamp 0000 Fuel Tank Left-Hand 000 Valve-Fuel 000 Cap-Gas AR Bushing 0/00

18 Model 0, 00, 0, 0, 0, 0, 0, 0 TRANSMISSION PF 0/00

19 TRANSMISSION Model 0, 00, 0, 0, 0, 0, 0, Hydrostat BDP with Auxiliary 00 Key-Straight mm x mm x mm 0 Sheave.0 x. 000 Washer-Flat-Steel. x.0 x Washer-Locking. x Bolt-Hex M x.0 x 000 Bolt-Hex.-0 x.0 Grade 0000 Bolt-Hex.- x. Grade 000 Washer-Flat-Steel.0 x. x Nut-Locking-Center.- 00 Variable-Displace Pump 0 Fitting-Lube.- x. 0 Anchor-Spring-Idler 000 Arm-Ground Drive Idler 000 Spring-Tension.0 x. x Bushing-Flange. x.0 x.0 x. 000 Washer-Flat-Steel. x.0 x Bolt-Hex.0- x.00 Grade 0 Bushing-Steel.0 x. x Nut-Locking-Center.0-0 Assembly-Idler Pulley 000 Bolt-Hex.- x. Grade 0000 AR Kit-Pump Seal (One Kit Required for each Pump) 000 Washer-Flat-Steel. x.0 x.0 0/00

20 Model 0, 00, 0, 0, 0, 0, 0, 0 MOTORS AND WHEELS PF 0/00

21 MOTORS AND WHEELS Model 0, 00, 0, 0, 0, 0, 0, 0 0 Fork-Front Bearing-Cone w/ Grease Bearing-Cup.0 x Bearing Seal. x x Spacer, PM,.0 I.D. x. O.D. x. 000 Spacer-Wheel 0000 Washer-Flat-Steel. x. x AR Wheel/Tire x Bolt-Hex.0- x.00 Grade Nut-Locking-Center Wheel-Tire x Multi-Trac (0, 00, 0, 0, 0, 0) 0000 A/R Tire x 0.0 (0, 00, 0, 0, 0, 0) 000 Wheel-Tire Assembly x 0 0- (0) 0000 Wheel-Tire x.0 Multi-Trac (0) A/R Tire x.0 (0) Bolt-Lug.0-0 x. 000 Hydraulic Wheel Motor (includes ) 000 Bushing-Sleeve. x. x. 000 Bolt-Hex.0- x.00 Grade 0000 Spacer.00 x.0 x Washer-Locking.0 x. 000 Rod-Motor Connecting 000 Hub and Disc Bolt-Hex.0- x.0 Grade 000 Nut -Lock Jam Patch (Included with ) 000 Washer-Flat-Steel. x. x Nut-Slotted Pin-Cotter. x Cap-Dust 0000 AR Wheel/Tire Kit, 0Z L. & R. (Optional) (Includes L.H. & R.H.) 000 AR Wheel/Tire-L.H. x 0.- TruPower (Optional) 000 AR Wheel/Tire-R.H. x 0.- TruPower (Optional) 000 AR Wheel/Tire x TruPower 0/00

22 BRAKES Model 0, 00, 0, 0, 0, 0, 0, PF 0 0/00

23 BRAKES Model 0, 00, 0, 0, 0, 0, 0, Caliper, Park Brake (CW) Right Hand 000 Caliper, Park Brake (CCW) Left Hand 0000 Pivot-Brake Rod 000 Nut-Locking-Center Rod-Brake inch 000 Spring-Compression. x.0 x Washer-Flat-Steel.0 x. x Nut-Hex Shaft-Brake Cross Interlock-Fixed 000 Interlock-Adjustable 000 Nut-Hex-Jam Bolt-Hex.- x.00 Grade 000 Nut-Locking-Center.- 0 Bushing-Flange.0 x.000 x Spacer.0 x. x.000 Key-Woodruff. x. Hard # 000 Arm-Brake Left-Hand 0000 Ring-Retaining-External. x Washer-Flat-Steel. x. x Pin-Cotter External.0 x. 000 Shaft-Brake Actuating 0000 Actuator Pin-Roll. x.00 Key-Woodruff. x. Hard # 0 Bushing-Flange.0 x.000 x Spacer.0 x. x Washer-Flat-Steel. x.0 x Ring-Retaining-External. x Knob-Steering Lock 000 Rod-Brake Actuating 0000 Pin-Cotter-External.0 x. 000 Spring-Tension.0 x. x.00 0/00

24 Model 0, 00, 0, 0, 0, 0, 0, 0 TANK AND FILTER PF Head-Filter 000 Bolt-Hex.-0 x.0 Grade 0000 Washer-Locking. x Oil Filter 00 Tank-Hydraulic Weldment 0000 Hydraulic Tank Dipstick Plug-Breather. 000 Screw-Tapping.- x. Hex Washer Head 0/00

25 LIFT VALVE AND CYLINDER Model 0, 00, 0, 0, 0, 0, 0, PF 000 Valve, Hydraulic Lift 0000 Nut-Locking-Nylon Bolt-Hex.-0 x. Grade 0000 Link 000 Screw-Machine 0- x.00 Hex Washer Head 0000 Nut-Locking-Nylon 0- with Insert 000 Cylinder-Hydraulic Lift 0 Strap-Height of Cut Indicator 000 Bushing. x.000 x Bolt-Hex.- x. Grade 0000 Washer-Lock. x. 000 Rod End-Right Hand-Female / 000 Nut-Locking-Center Nut-Jam Bolt-Hex.0- x. Grade 000 Nut-Locking-Center Washer-Flat-Steel. x. x Washer-Flat-Steel. x.0 x Spacer.00 x.0 x Washer-Flat-Steel. x.000 x Washer-Flat-Steel. x. x Wave-Washer 0000 Latch 0/00

26 Model 0, 00, 0, 0, 0, 0, 0, 0 PUMP TO TANK CIRCUIT see "Deck Lift Circuit" B PF0 0 Adapter 0 Adapter-Tee.- 0 Hose-Hydraulic Valve to Tank 000 Adapter 0 Adapter 00 Hose-Pump to Tee 0 Adapter-Tee.- 0/00

27 DECK LIFT CIRCUIT Model 0, 00, 0, 0, 0, 0, 0, 0 see "Pump to Tank Circuit" B 0 PF0 000 Adapter 0 Adapter 0 Hose-Hydraulic Valve to Tank 0 Adapter 0 Adapter 0000 Hose Hydraulic.. Long 000 Hose-Hydraulic. 0." Long 000 Sleeve Protective " 0 Adapter Cable Tie 0/00

28 Model 0, 00, 0, 0, 0, 0, 0, 0 MOTOR TO PUMP CIRCUIT PF Adapter-Hydraulic Steel. to. 000 Hose-Hydraulic.0. Long 000 Hose-Hydraulic.0 x.0 Long 0000 Adapter-Hydraulic Steel / to / 0/00

29 HYDRAULIC DIAGRAM Model 0, 00, 0, 0, 0, 0, 0, 0 Lift Cylinder Return Inlet Lift Valve B A Deck Lower Deck Lift Left Pump A B B A Right Pump Forward High Pressure Left Wheel Motor Upper B Forward High Pressure Reverse High Pressure Upper A Right Wheel Motor A Lower Reverse High Pressure B Lower Oil Filter PRESSURE RETURN SUCTION Oil Tank PF 0/00

30 Model 0, 00, 0, 0, 0, 0, 0, 0 STEERING CONTROLS - UPPER D C D 0 C 0 PF 0/00

31 STEERING CONTROLS - UPPER Model 0, 00, 0, 0, 0, 0, 0, Spring-Tension.0 x. x Rod-Steering Adjustment 000 Rod End / Right-Hand-Female 000 Nut-Jam Washer-Locking. x Bolt-Hex.- x. Grade 000 Nut-Locking-Center Bolt-Hex.- x.0 Grade 000 Rod-Steering 0 0 Bushing-Flange. x.0 x. x Eccentric 000 Screw-Tapping.- x. Hex Washer Head 000 Nut-Locking-Center Handle Weldment Left-Hand 0 Bushing-Flange-Nylon. x. x. 000 Spacer 0000 End Cap-Steering Lever Tube 000 Grip-Handlebar 000 Handle Weldment Right-Hand 0 0 Mount-Steering Rod-Right Hand 0000 Washer-Locking. x Nut-Hex.- 00 Mount-Steering Rod-Left Hand 0000 Bolt-Round Head Square Neck.- x Bolt-Round Head Square Neck.- x.0 0/00

32 Model 0, 00, 0, 0, 0, 0, 0, 0 STEERING CONTROLS - LOWER 0 0 PF 0000 Arm-Pump Actuating 000 Bolt-Hex.-0 x. Grade 000 Nut-Locking-Center Rod-Pivot 0000 Pivot-Neutral Right-Hand 000 Bolt-Hex.- x.00 Grade 0000 Spring-Tension.0 x.0 x Pivot-Neutral Left-Hand 000 Spacer Support-Pivot Rod 000 Bolt-Round Head Square Neck.- x Nut-Locking-Nylon Dampener Control 000 Stud-Ball 0000 Washer-Locking. x Nut-Locking-Center.- 0 Anchor-Damper 0 Grommet. x Bolt-Hex.- x. Grade 0 0/00

33 DECK LIFT Model 0, 00, 0, 0, 0, 0, 0, Lift-Mower 000 Ring-Retaining-External.00 x.0 0 Bushing-Flange-Nylon.00 x. x. x. Key-Woodruff. x.00 0 Washer-Flat-Steel.0 x.00 x. 000 Weldment, Lift Arm-Front 000 Weldment, Lift Arm-Shaft-Left Hand 00 Bushing-Flange-Nylon. x.0 x.0 x. 00 Washer-Hardened-Steel. x. x Ring-Retaining-External. x Weldment, Lift Arm Shaft-Right Hand 0 Bushing-Flange.0 x.000 x. 00 Knob-Steering Lock 000 Nut-Hex-Jam Rod-Lift Assist 000 Nut-Jam Pivot-Mower Lift 000 Washer-Flat-Steel.0 x.00 x Ring-Retaining-External. x Lever-Deck Lift 0/00

34 Model 0, 00, 0, 0, 0, 0, 0, 0 CONTROL PANEL PF0 000 Panel-Control 000 Screw-Machine 0- x.0 Hex Washer Head 000 Throttle Control (0, 00, 0, 0) 000 Throttle Control (0, 0, 0) 000 Screw-Machine 0- x.0 Hex Washer Head 0000 Nut-Locking-Nylon 0- With Insert 000 Choke Control (0, 00, 0) 000 Choke-Control (0, 0, 0) 000 Choke-Control (0) 000 Screw-Machine 0- x.0 Hex Washer Head 0/00

35 CONTINUITY DIAGRAMS Model 0, 00, 0, 0, 0, 0, 0, 0 The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch (0000) Seat Switch (000) B A S S B A S S B A S S M G M G M G OFF RUN START OPERATOR OFF SEAT OPERATOR ON SEAT PTO Switch (0000) Relay (0000) A A 0 0 DISENGAGED (down position) ENGAGED (up position) NOT ENERGIZED ENERGIZED Brake Switch and CE Harness Switches (000 and 000) ENGAGED (button in) DISENGAGED (button out) PF0 0/00

36 WIRING DIAGRAM Model 0, 00, 0, 0, 0, 0 SEAT / PTO RELAY SEAT SWITCH 0 PINK a CAB POWER SUPPLY 0 BLACK BLACK HOUR METER PURPLE RED / YELLOW PTO SWITCH PURPLE / WHITE PTO CLUTCH BLACK ENGINE STARTER SOLENOID RED OIL PRESSURE FUEL SOLENIOD MAGNETO KILL BATTERY REGULATOR RED BLACK BLACK A BLUE / WHITE RED / YELLOW PURPLE WHITE / BLACK FUSE 0A B RED BLACK OIL LIGHT B G A M a 0 RED / YELLOW RED / VIOLET START RELAY BLACK BROWN / YELLOW BRAKE SWITCH BLACK BROWN S RED / VIOLET S KEY SWITCH PF0 0/00

37 WIRING DIAGRAM Model 0, 00, 0, 0, 0, Key Switch 0 Hour Meter 0000 Switch-Clutch With Retainer Ring 00 Light-Indicator 000 Electric Clutch 000 Battery with Tube 00 Cable-Battery To Solenoid 000 Ground Cable 00 AR Relay (Included with Harness) 0 00 Seat Switch 000 Switch-Single Pole 000 Harness Kohler AR Fuse, 0 Amp (Included with Harness) 0000 AR Molded Diode Plug-Black -Amp (Included with Harness) 0/00

38 WIRING DIAGRAM Model 0 SEAT / PTO RELAY SEAT SWITCH 0 a PINK CAB POWER SUPPLY 0 BLACK BLACK HOUR METER PURPLE RED / YELLOW PTO SWITCH PURPLE / WHITE PTO CLUTCH ENGINE OIL PRESSURE FUEL SOLENIOD REGULATOR BLACK BLUE / WHITE RED / YELLOW PURPLE OIL LIGHT START RELAY BLACK BROWN / YELLOW BLACK BLACK STARTER SOLENOID RED MAGNETO KILL a 0 CE RELAY WHITE / BLACK BLUE BLACK LIGHT BLUE HOOD SWITCH DECK LID SWITCH LIGHT BLUE a 0 RED / YELLOW PURPLE BATTERY RED A FUSE 0A B RED BLACK B G A M RED / VIOLET BRAKE SWITCH BLACK BROWN S RED / VIOLET S KEY SWITCH PF0 0/00

39 WIRING DIAGRAM Model Key Switch 0 Hour Meter 0000 Switch-Clutch With Retainer Ring 00 Light-Indicator 000 Electric Clutch 000 Battery with Tube 00 Cable-Battery To Solenoid 000 Ground Cable 00 AR Relay (Included with Harness) 0 00 Seat Switch 000 Switch-Single Pole 000 Harness-Kohler AR Fuse, 0 Amp (Included with Harness) 0000 AR Molded Diode Plug-Black -Amp (Included with Harness) 000 Harness-CE Adapter 0/00

40 WIRING DIAGRAM Model 0 SEAT / PTO RELAY SEAT SWITCH 0 PINK a CAB POWER SUPPLY 0 BLACK BLACK HOUR METER PURPLE RED / YELLOW PTO SWITCH PURPLE / WHITE PTO CLUTCH SWITCH ENGINE BLACK OIL PRESSURE FUEL SOLENIOD REGULATOR BLUE / WHITE RED / YELLOW PURPLE OIL LIGHT START RELAY BROWN / YELLOW BLACK BLACK MAGNETO KILL WHITE / BLACK a 0 BLACK STARTER RED / YELLOW RED RED BATTERY RED BLACK A FUSE 0A B RED BLACK B G A M RED / VIOLET BRAKE SWITCH STARTER SOLENOID BROWN S S RED / VIOLET BLACK KEY SWITCH PF0 0/00

41 WIRING DIAGRAM Model Key Switch 0 Hour Meter 0000 Switch-Clutch With Retainer Ring 00 Light-Indicator 000 Electric Clutch 000 Battery with Tube 00 Cable-Battery To Solenoid 000 Ground Cable 00 AR Relay (Included with Harness) 0 00 Seat Switch 000 Switch-Single Pole 0000 Harness-Briggs Wiring AR Fuse, 0 Amp (Included with Harness) 0000 AR Molded Diode Plug-Black -Amp (Included with Harness) 0/00

42 Model 0, 00, 0, 0, 0, 0, 0, 0 ELECTRICAL SYSTEM PF 0 0/00

43 ELECTRICAL SYSTEM Model 0, 00, 0, 0, 0, 0, 0, Key Switch 000 Harness Kohler 0000 Wire Harness-Briggs 0 Nut-Panel.- 00 Cap-Ignition Switch 0 Ignition Switch Key 0 Key Chain 0 Hour Meter 000 Switch-Clutch With Retainer Ring 00 Light-Indicator Tube Clip. 000 Battery with Tube 000 Clamp-Battery 0000 Screw-Tapping.-0 x.0 Hex Washer Head 000 Washer-Flat-Steel. x.0 x Nut-Locking-Center Bolt-Hex.-0 x. Grade 0 Insulator 000 Start Cable " 000 Ground Cable 0 0 Cable Tie 000 Screw-Machine 0- x.0 Hex Washer Head 0000 Nut-Locking-Nylon 0- With Insert 00 AR Relay (Included with Harness) 00 Seat Switch 000 Screw-Tapping - x.0 Hex Washer Head 000 Switch-Single Pole 000 Screw-Machine 0- x. Hex Washer Head 0 Plate-Switch Screw-Tapping.- x.0 Hex Washer Head AR Fuse, 0 Amp (Included with Harness) 0000 AR Molded Diode Plug-Black -Amp (Included with Harness) 00 Pad-Battery 000 Solenoid-Starting 000 Bolt-Hex.-0 x.0 Grade 0/00

44 HOOD AND PANEL SWITCHES Model 0 PF0 000 Mount-Switch 000 Bracket-Switch 000 Switch-Single Pole N.O. 000 Screw-Machine 0- x. Hex Washer Head 0000 Nut-Lock-Nylon 0- With Insert 000 Screw-Tap. x x.0 Hex Washer Head 000 Switch-Single Pole N.O. with Cover 000 Wire Harness-CE Adaptor 0/00

45 " DECK AND SPINDLES Model PF0 00 Weldment, " Deck (Side Discharge) 00 Plate, " Reinforcment 0000 Spacer. x. x Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Nylon Assembly, Spindle L-Hub (Contains Items -) 000 Washer-Flat-Steel.0 x. x Nut-Locking-Center Assembly, Spindle Bolt-Round Head Square Neck.- x.00 Grade 0000 Washer-Locking. x Slinger-Dust 000 Ring, Retaining-Internal.0 x Bolt-Hex.- x.00 Grade 0/00

46 0" DECK AND SPINDLES Model 00, 0, o 0 PF 0 Weldment, 0" Deck (Side Discharge) 0 Plate, 0" Reinforcing 00 Spring, Bracket 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Nylon Assembly, Spindle L-Hub 000 Assembly, Spindle 000 Bolt-Round Head Square Neck.- x.00 Grade 0000 Washer-Locking. x Bolt-Hex.- x.00 Grade 000 Slinger-Dust 0/00

47 0" DECK AND SPINDLES Model 0, 0, 0, PF 0 Weldment, 0"Deck (Side Discharge) 00 Plate, 0" Reinforcement 0 Anchor, Spring 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Nylon Assembly, Spindle L-Hub 000 Slinger-Dust 000 Bolt-Hex.- x.00 Grade 0000 Washer-Locking. x Bolt-Round Head Square Neck.- x.00 Grade 000 Assembly, Spindle 0/00

48 " DISCHARGE CHUTE AND BAFFLES Model PF0 0/00

49 " DISCHARGE CHUTE AND BAFFLES Model 0 0 Weldment, Discharge Chute Bracket 000 Bolt-Hex.- x.00 Grade 000 Nut-Locking-Flange Deflector, " 000 Bolt-Round Head Square Neck.- x.00 Grade 000 Nut-Locking-Center Bolt-Round Head Square Neck.- x.00 Grade 0000 Nut-Locking-Nylon.- 00 Weldment, " Left Hand Baffle Bolt-Hex.- x.00 Grade 000 Washer-Flat-Steel. x. x.0 00 Weldment, " Center Baffle 000 Washer-Flat-Steel. x. x.0 00 Weldment, " Right Hand Baffle 00 Weldment, Discharge Chute " 0000 Bolt-Shoulder.- x. 000 Bolt-Round Head Square Neck.- x. Grade 0/00

50 0" DISCHARGE CHUTE AND BAFFLES Model 00, 0, PF 0/00

51 0" DISCHARGE CHUTE AND BAFFLES Model 00, 0, 0 0 Weldment, Discharge Chute Bracket 000 Bolt-Hex.- x.00 Grade 000 Nut-Locking-Flange.- 0 Deflector, 0" 000 Bolt-Round Head Square Neck.- x.00 Grade 000 Nut-Locking-Center Bolt-Round Head Square Neck.- x.00 Grade 0000 Nut-Locking-Nylon.- 0 Weldment, 0" Left Hand Baffle-Upper Bolt-Hex.- x.00 Grade 000 Washer-Flat-Steel. x. x.0 0 Weldment, 0" Center Baffle-Up 000 Washer-Flat-Steel. x. x.0 0 Weldment, 0" Right Hand Baffle-Upper 0000 Weldment, Discharge Chute 0" 000 Bolt-Round Head Square Neck.- x. Grade 0000 AR 0" Mulching Kit 0000 AR 0" Discharge Cover 0/00

52 Model 0, 0, 0, 0 0" DISCHARGE CHUTE AND BAFFLES 0 PF 0 0/00

53 0" DISCHARGE CHUTE AND BAFFLES Model 0, 0, 0, 0 0 Weldment, Discharge Chute Bracket 000 Bolt-Hex.- x.00 Grade 000 Nut-Locking-Flange.- 0 Deflector 000 Nut-Locking-Center.- 0 Weldment, 0" Left Hand Baffle-Upper 000 Bolt-Hex.- x.00 Grade Nut-Locking-Nylon Washer-Flat-Steel. x. x Weldment, 0" Center Baffle-Up 000 Bolt-Round Head Square Neck.- x. Grade 0 Weldment, 0" Right Hand Baffle-Upper 000 Bolt-Round Head Square Neck.- x.00 Grade 000 Weldment, Discharge Chute 0" 000 Bolt-Hex.- x.00 Grade 0000 AR 0" Discharge Cover 0000 AR 0" Mulch Kit 0/00

54 Model 0, 00, 0, 0, 0, 0, 0, 0 BELTS, IDLERS AND BLADES 0 0 0" 0" 0 PF 0/00

55 BELTS, IDLERS AND BLADES Model 0, 00, 0, 0, 0, 0, 0, Blade, " Mower Tungsten Hi-Lift 000 Blade, 0" Mower Tungsten Hi-Lift 000 Blade, 0" Mower Tungsten Hi-Lift 000 AR 0" Mulching Blade-Tungsten 000 AR 0" Mulching Blade-Tungsten 000 Washer, Flat.0 x. x Washer-Bellville. x. x Bolt, Blade 0000 Key-Straight. x.00 x. 000 Weldment, Spindle Sheave.00 (" Deck) 000 Weldment, Spindle Sheave.00 (0" Deck) 000 Weldment, Spindle Sheave.00 (0" Deck) 000 Weldment, Sheave (Double). (" Deck) 000 Weldment, Spindle Sheave (Double). (0" Deck) 000 Weldment, Spindle Sheave (Double). (0" Deck) Washer, Cupped, Serrated. Washer-Flat-Steel. x. x Bolt-Hex.- x.00 Grade 000 V-Belt, B-RMA. x. (" Deck) 000 V-Belt, B-RMA.0 x. (0" Deck) 000 V-Belt, B-RMA.0 x. (0" Deck) 000 V-Belt, B-RMA. x. (" Deck) 0000 V-Belt, B-RMA. x. (0" Deck) 000 V-Belt, B-RMA. x. (0" Deck) 00 Arm,Idler Pivot 00 Bushing-Flange-Nylon. x.0 x.0 x. 000 Bolt, Hex.- x.00 Grade 000 Idler-V.00 x. 00 Spring-Compression.0 x.0 x.00 WLD 000 Bolt-Hex.- x. Grade 000 Nut-Locking-Center Bolt-Round Head Square Neck.0- x.0 0 Spacer.0 x.0 x. Steel 000 Spring, Extension 000 Nut-Locking-Center Assembly, Idler Pivot Arm (Contains Items & ) 000 AR Weldment, Idler Pivot Arm 000 AR Bearing.000 x. x Fitting-Lube.- x Bearing, Pedistal Powdered Metal 0000 Idler-Flat.00 x. (.00 W) 0 0 Bushing.0 x.0 x. 000 Spring, Extension 000 Bolt-Round Head Square Neck.- x. Grade 0 Bracket, Spring 000 Nut-Locking-Nylon Washer-Flat-Steel. x. x.0 0/00

56 Model 0, 00, 0, 0, 0, 0, 0, 0, 0 ROLLERS 0 "& 0" Deck " Deck PF 0/00

57 ROLLERS Model 0, 00, 0, 0, 0, 0, 0, Bolt-Round Head Square Neck.- x.00 Grade (" & 0" Deck) Bolt-Round Head Square Neck.- x.00 Grade (0" Deck) Nut-Locking-Nylon.- (" & 0" Deck) Nut-Locking-Nylon.- (0" Deck) 0000 AR Assembly, Roller Bracket (" & 0" Deck)(Contains Items -)(Optional) 000 AR Assembly, Roller Bracket-Left Front (" & 0" Deck)(Contains Items -,) 0 AR Weldment-Roller Bracket (Optional) 0 AR Weldment-Roller Bracket-Left Front (" & 0" Deck) 000 AR Weldment-Roller Fork 000 AR Pin-Clevis. x AR Kickout Ring 0 AR Bushing-Sleeve.0 x. x AR Washer-Hardened Thrust.00 x. x AR Bushing-Flange.00 x. x. x AR Fitting-Lube.- Taper 000 AR Washer-Flat Steel. x. x AR Pin-Cotter. x AR Shaft, Castor 0000 AR Roller 00 Bracket, Anti-Scalp Roller 0000 Roller 0000 Nut-Locking-Nylon.0- (" & 0" Deck) 000 Bolt-Hex.- x.00 Grade (0" Deck) Washer-Flat-Steel. x. x.0 (" & 0" Deck) 000 Washer-Flat-Steel. x. x.0 (0" Deck) 000 Washer-Flat-Steel. x.0 x.0 (" & 0" Deck) 0 Shaft, Center Roller (0" Deck) 0 Bracket, Roller (0" Deck) 0 Rod (0" Deck) 000 Washer-Flat-Steel. x. x.0 00 Roller, Gage (0" Deck) 0 Roller, Gage (0" Deck) 000 Pin-Cotter. x Bolt-Hex.-0 x. Grade Nut-Locking-Center Bolt-Hex.- x.00 Grade (0" Deck) 000 Bolt-Round Head Square Neck.0- x.00 Grade (" & 0" Deck) 000 Wheel, x (" & 0" Deck) 0000 Screw-Self Tapping.-0 x.0 x Hex Washer Head 000 Washer-Flat-Steel 0000 Pin 000 Bolt-Round Head Square Neck.- x. Grade 000 Washer-Flat-Steel.0 x. x.0 (" & 0" Deck) 000 Washer-Flat-Steel.0 x. x.0 (0"Decks) 0 0 Weldment-Left Front Roller Bracket (" & 0" Deck) 0 Weldment-Right Front Roller Bracket (" & 0" Deck) 0 Weldment-Wheel Support Left Hand (" & 0" Deck) 0 Weldment-Wheel Support Right Hand (" & 0" Deck) 0/00

58 MOUNTING ARMS AND BELT GUARDS Model 0, 00, 0, 0, 0, 0, 0, " & 0" Deck 0 0 0" Deck PF 0/00

59 MOUNTING ARMS AND BELT GUARDS Model 0, 00, 0, 0, 0, 0, 0, 0 00 Bracket, Mower Mounting (Rear) 000 Bolt-Round Head Square Neck.0- x.00 Grade 000 Nut-Locking-Center Assembly, Mower Mounting Arm (Contains Items,) 0 AR Weldment-Mower Mounting Arm 000 AR Bearing. x. x Fitting-Lube.- x. 000 Weldment, Mower Mounting Pin 000 Bolt-Hex.- x. Grade Nut-Locking-Center.- 0 Guard, Pulley Right Hand (" Deck) 00 Guard, Pulley Right Hand (0" Deck) 000 Guard, Pulley Right Hand (0" Deck) 0 Guard, Pulley Left Hand (" Deck) 00 Guard, Pulley Left Hand (0" Deck) 000 Guard, Pulley Left Hand (0" Deck) 000 Bolt-Round Head Square Neck.- x Washer-Flat-Steel. x. x Washer-Locking. x Nut-Hex Nut-Locking-Center Washer-Flat-Steel. x.00 x Bolt-Hex.- x. Grade Washer-Flat-Steel. x.00 x. 0" Deck 000 Washer-Flat-Steel. x.00 x. 0" Deck 000 Nut-Locking-Center Bolt-Round Head Square Neck.- x.00 Grade 0/00

60 MOUNTING BRACKETS Model 0, 00, 0, 0, 0, 0, 0, 0 " & 0" Deck 0" Deck PF0 000 Bracket, Mower Mounting 000 Bolt-Round Head Square Neck.- x. Grade (0" Deck) 000 Bolt-Round Head Square Neck.- x. Grade (0" Deck) 000 Nut-Locking-Nylon Chain, Link 000 Bolt-Hex.- x.0 Grade 000 Nut-Hex Washer-Flat-Steel.0 x. x Nut-Locking-Center Bolt-Round Head Square Neck.- x.0 Grade (0" Deck) 0/00

61 GRAVELY A Division of Ariens Company West Ryan Street P.O. Box Brillion, WI Fax