Parts Manual DX260D / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

Size: px

Start display at page:

Download "Parts Manual DX260D / Please read the operator s manual carefully and make sure you understand the instructions before using the machine."

Roy Manning
5 years ago
Views:

1 Parts Manual DX260D / Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Form Number Rev B

2 When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This Parts Manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number The machine s manufacturing number can be found on the printed plate affixed under the seat on the right side of the frame. Stated on the plate, from the top are: The machine s type designation (I.D.). The manufacturer s type number (Model). The machine s serial number (Serial no.) Please have the type designation and serial number available when ordering spare parts. The engine s manufacturing number is on the head cover. The plate states: The engine s model. The engine s serial number. The engine s type. Code Please have these available when ordering spare parts. The wheel motors and hydrostatic pumps have a barcode decal affixed on the top. Accessories Available Mulch Kit 60" OCDC Kit 60" (Operator Controlled Discharge Chute) Bearing Kit All rights reserved. Orangeburg, SC Printed in U.S.A.

3 CONTENTS FRAME... 4 ENGINE... 6 COOLING SYSTEM... 8 STEERING... IGNITION SYSTEM... PARKING BRAKE WHEELS AND TIRES MOWER LIFT / DECK LIFT MOWER DECK / CUTTING DECK SEAT DECALS PROTECTION FRAME HYDRAULIC PUMP-MOTOR NOTE: ALL FASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIFIED.

4 4 FRAME

5 FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FLOORPAN BLU BUMPER, REAR BLU w/ DECAL PLATE, SKID BLK GUARD, REAR BLU FOOT REST BLU MOUNT, F/F INSERT BRACKET, REST MOUNT FLEX TRIM BLK NUTSERT 5 / NUT 3 /8-16 HEX FLG NYLOC RHSNB 3 /8-16 x HHFS 5 /16-18 x 3¾ SCREW 5 /16-18 x ½ SLF TAP HHFS 5 /16-18 x 1¼ TPBLT HCS 3 /8-16 x WASHER 5 /16 DISC SPRING WASHER 3 /8 EXT STAR CLAMP, DOUBLE TUBE BOLT 5 /16-18 x 1 THD FRM NUT 5 /16-18 HEX FLANGE NYLOC HHFS 5 /16-18 x ¾ TIE WRAP w/ CLIP CROSS MEMBER, BLU FRAME BLU MOUNT, TANK RT BLK MOUNT, TANK LT BLK LINKAGE, U-BOLT NUT ½-13 HEX FLG NYLOC PLATE, WEIGH BLK WASHER SPRING, TANK MOUNT BUMPER NUT ¼-20 HEX THIN NYLOC STRAP, FRAME HHFS 3 /8-16 x 2½ HCS 5 /16-18 x WASHER 5 /16 FLAT WASHER 3 /8 THICK 5

6 6 ENGINE

7 ENGINE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BRACKET, MOUNTING PULLEY, ENGINE SHAFT, PILOT GEAR BOX, 90 O ISOLATOR, ENGINE MOUNT, MOTOR LT BLK MOUNT, MOTOR RT BLK GROMMET PULLEY, DRIVE AIR FILTER ASSY HOSE, AIR INTAKE HCS M-1.25 x 20 GR NUT 5 /16-18 HEX CTRLK BOLT M GR8.8 TAP BOLT M x 25 GR SCREW 5 /16-18 x 1 HWH TAP WASHER 7 /16 SLW SCREW 7 /16-20 x 2 GR WASHER 5 /16 SLW SCREW 5 /16-18 x ¾ SCREW M x 35 GR NUT 3 /8-16 HEX CNTRLK WASHER 3 /8 SAE FLT HHFS 3 /8-16 x 1¼ BOLT 5 /16-18 x ¾ THD FRM NUT 5 /16-18 HEX FLANGE NYLOC WASHER, HEAVY NUT ½-13 HEX FLG NYLOC SCREW ½-13 x 2¾ HEX HD M x 16 GR KEY ¼ SQ x ¾ SCREW 7 /16-20 x 1 HEX HD M6-1.0 HEX NUT WASHER ¼ INT TOOTH LK CLAMP SCREW 3 /8-16 x 1½ HEX HD BRACKET, THROTTLE SWIVEL, THROTTLE CLAMP, CABLE SCREW -24 x 5 /8 WSHR HD WASHER 5 /16 SAE FLAT PIN, COTTER SCREW #-24 x ½ SLT HD SCREW 5 /16-18 x 1¼ HEX HD KIT, SPARK ARRESTOR WASHER 5 /16 EXT STAR LK SHIELD ASSY AIR FILTER ASSY, LOWER WASHER, SPECIAL CLUTCH, OGURA YOKE, CLEVIS PIN, PIVOT LINKAGE, ANTI-ROTATION PULLEY, IDLER MOUNT, GEAR BOX, BLK TENSIONER PULLEY, GEAR BOX MOUNT, IDLER PLATE, PULLEY WASHER, BLADE MOUNT, GEAR BOX, BLK PIN, DETENT NUT 7 /16-14 HEX CTRLK GR A SPRING, COMPRESSION BELT, CLUTCH HCS 5 /16-18 x WASHER, HEAVY NUT 7 /16-20 HEX NYLOC SCREW 7 /16-20 x 2¾ HEX HD E- RING 3 / AIR FILTER ASSY, UPPER KEY ¼ SQ x 1½ SHIELD, HEAT BARRIER MUFFLER ASSY SPACER, RUBBER WASHER ½ x PIN 7 /16 CLEVIS E RING 7 / HOSE, VENT PIPE, MANIFOLD TERMINAL COVER-SM SHIELD, HEAT BLK CLAMP NOT SHOWN HARNESS, ENGINE CABLE, GROUND WIRE TIE 7

8 8 COOLING SYSTEM

9 COOLING SYSTEM ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION SCREEN, DEBRIS, BLK ISO-MOUNT INSERT ISO-MOUNT BUSHING ISO-MOUNT BUSHING MOUNT, RADIATOR, BLU FAN, ELECTRIC NUT 3 /8-16 HEX FLG NYLOC HHFS 3 /8-16 x NUT 5 /16-18 HEX FLANGE NYLOC HHFS 5 /16-18 x ¾ TIE WRAP w/ CLIP WIRE TIE RADIATOR MOUNT, RADIATOR RR BLK WASHER 7 /16 FLAT GUARD, HOSE BLK w/ DECAL HOSE, RADIATOR, LT HOSE, RADIATOR, RT MOUNT, RADIATOR, FT BLK SCREW ¼ -20 x 5 /8 THDROLL NUT ¼-20 HEX THIN NYLOC GROMMET, BUMPER CLAMP, HOSE RHSNB 5 /16-18 x 1¾ GUARD, BELT STRAP, BELT GUARD BLK FLEX TRIM BLK STRAP, GUARD SLEEVE, HOSE NUT #-24 HEX NYLOC SCREW#-24 x.625 MACH CLAMP WASHER ¼ SPLT LK WASHER ¼ FLAT SAE FITTING, PIPE, ¼ NPT BOTTLE, OVERFLOW MOUNT, RADIATOR, RT HOSE, OVERFLOW UPPER HOSE, OVERFLOW LOWER GUARD, OVERFLOW BLK BOLT 5 /16-18 x ¾ THD FRM SHIELD, BELT, BLU w/ DECAL RHSNB 3 /8-16 x 1¾ MODULE, FAN REVERSE SCREW #-24 x ½ SLT HEX HD WASHER 3 /16 LOCK SCREW #- 24 x 1 1 / WASHER x ¾ x 16 GA SPACER, SPLIT NUT, ACORN # LATCH, HOOD PLATED, WELD NUT 9

10 STEERING

11 STEERING ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FRAME MOUNT BLU RETAINER, U TYPE SWITCH, BRAKE (3-POLE) DAMPENER BEARING, FLANGE BRACKET, CONTROL SWITCH N.C LEVER, MOTION LEVER w/ GRIP RT LEVER w/ GRIP LT LEVER, CONTROL ROD END, SPHERICAL SPACER, BLK SPRING SPRING BOLT 5 /16-18 x 1¼ HEX TPBLT RETAINER NUT 3 / WASHER 5 /16 SAE FLAT BUSHING ¼ FLANGE LINK, SWITCH BALL STUD MM SCREW -24 x ¾ SKT HD TURNBUCKLE 3 / NUT 3 /8-16 HEX FLG NYLOC NUT 3 /8-24 HEX JAM NUT 5 /16-18 HEX FLANGE NYLOC HHFS 3 /8-16 x NUT 5 /16-24 NYLOC ROD END, SPHERICAL RH HHFS 5 /16-18 x ¾ GRIP, LEVER WASHER 3 /8 SAE FLT HAIRPIN COTTER PUSH NUT ¼ BUMPER WASHER 5 /16 SLW NUT 5 /16-24 HEX LINKAGE, CONTROL PLATE, TAPPED DAMPENER ASSY NUT ¼-20 HEX THIN NYLOC SEAT STRUT ASSY RHSNB ¼-20 x ¾ GR HEXNUT M8 x 1.25 STD LINKAGE, CONTROL FT LINKAGE, CONTROL HCS ½-13 x 2¾ HEX NYL BLOCK, TRACKING SCREW 5 /16-18 x 1¾ BTN HD SPACER, PIVOT NUT ½-13 HEX JAM NYLOC GR NUT 5 /16-18 HEX NYLOC BRACKET, DAMPENER SCREW 3 /8-16 x 1 HEX FLG 11

12 IGNITION SYSTEM

13 IGNITION SYSTEM ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION TANK ASSY, LT TANK ASSY, RT CLAMP CAP, DIESEL FUEL GROMMET, RUBBER FITTING, FUEL FITTING, RETURN KNOB CABLE, THROTTLE DECAL, CONTROL SWITCH, IGNITION KEY, IGNITION HOUR METER SWITCH, PTO AMP PANEL, CONTROL BLK SPRING, TANK MOUNT WASHER 5 /16 SAE FLAT STUD, FUEL TANK NUT -24 HEX NYLOC NUT 5 /16-18 HEX FLANGE NYLOC LINE, FUEL ASSY FUEL LINE 2½" FUEL LINE 14" VALVE, FUEL CLAMP, HOSE LINE, FUEL ASSY RETURN HOSE, FUEL 9½" TEE, FUEL LINE FUEL LINE ¼" FUEL LINE 18½" LINE, FUEL ASSY TEE, FUEL LINE VALVE, CHECK FUEL LINE 5" FUEL LINE 21" SCREW -24 x ¾ SKT HD SCREW -24 x 3 /8 SKT HD BOX, BATTERY BLK BATTERY, 500 CCA BRACKET, BATTERY MOUNT J HOOK WINGNUT ¼-20 NYLOC RHSNB 5 /16-18 x ¾ NUTCAP, IGNITION FILTER, FUEL HEAD, FUEL FILTER HCS ¼-20 x ¾ WASHER ¼ SPLT LK FITTING, 90 O MODULE, CONTROL CLAMP NOT SHOWN CABLE, POSITIVE CABLE, NEGATIVE HARNESS, MAIN 13

14 14 PARKING BRAKE

15 PARKING BRAKE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BRACKET, BRAKE SPRING LINKAGE, BRAKE, PRIMARY WASHER 3 /8 SAE FLT BUSHING, PIVOT SPRING HCS 5 /16-18 x NUT 5 /16-18 HEX FLANGE NYLOC WASHER 3 /8 FLT STD HCS 3 /8-16 x NUT 3 /8-16 HEX FLG NYLOC LEVER, BRAKE BLK LINK, FOLLOWER BUSHING, BRAKE ARM, BRAKE E-RING ¾ BUSHING ¾ x 1 SLEEVE WASHER HCS 3 /8-16 x NUT 3 /8-16 HEX JAM NYLOC NUT 5 /16-24 NYLOC HCS 3 /8-16 x 1¼ RHSNB 3 /8-16 x 1¼ LINKAGE, BRAKE LT-RR PIN, BRAKE ARM RING 5 /16 RETAINING EXT LINKAGE, BRAKE, RT-RR NUT 5 /16-18 HEX JAM E- RING 3 / HCS 3 /8-16 x BELLCRANK, BRAKE WASHER 1 /8 FRICTION HHFS 5 /16-18 x 1½ TPBLT GRIP, LEVER WASHER, WAVE PLATE, BRAKE BLK LINKAGE, BRAKE BALL END, RH ROD END, SPHERICAL RH NUT 5 /16-24 HEX 15

16 16 HYDRAULIC PUMP-MOTOR

17 HYDRAULIC PUMP-MOTOR ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PUMP BAY, BLK IDLER ASSY w/ BEARINGS MOTOR, PRM, RT MOTOR, PRM, LT PUMP, 21CC, RT PUMP, 21CC, LT SHEAVE, PUMP BELT, PUMP RESERVOIR ASSY SPRING KEY, 5MM SQ x 36MM HEAD, FILTER GUARD, HOSE GUIDE, BELT IDLER ASSY w/ BEARINGS SHIELD, DUST ½ ID SHIELD, DUST BOLT 7 /16-14 x 4 GR 8 BLK HCS ¼-20 x 5 / WASHER ¼ SPLT LK NUT 7 /16-14 HEX NYLOC WASHER, SAE RETAINER, U TYPE HHFS 5 /16-18 x ¾ HCS ½-13 x 2½ NUT ½ LUG NUT ¼-20 HEX THIN NYLOC NUT 5 /16-18 HEX FLANGE NYLOC RHSNB 5 /16-18 x ¾ HHFS 3 /8-16 x 2¾ NUT 3 /8-16 HEX FLG NYLOC NUT 3 /8-16 HEX WHIZLK HCS 3 /8-16 x 1½ GR NUT ½-13 HEX FLG NYLOC BOLT ½-13 x 1¼ WHIZLK SP SET SCREW 5 /16-18 x 1 SQ HD SPACER, IDLER WASHER 3 /8 SAE FLT MOUNT, FILTER, BLK FILTER, 25 MICRON RHSNB 5 /16-18 x CAP, RESERVOIR TUBE, ANTI-SPLASH PIVOT, BEARING HCS ½-13 x NUT ½-13 HEX WHIZLK ½-13 HEX NUT THIN NYLOC WASHER, ½ x ½ BOLT 3 /8-16 x LINE, HYD, CASE-PRM LINE, HYD, LT-AA LINE, HYD, LT-BB LINE, HYD, RT-AB LINE, HYD, RT-BA LINE, HYD, SUCTION LINE, HYD, CASE-PUMP LINE, HYD, CHARGE LINE, HYD, CHARGE FITTING, -8 STRAIGHT FITTING ELBOW 90 O ADJ FITTING, HYD FITTING, O FITTING, HYD, BEARING, BALL BEARING IDLER, PUMP RING 1 5 /8 RETAINING

18 WHEELS AND TIRES

19 WHEELS AND TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION CAP, DUST NUT ¾-16 HEX THIN NYLOC WASHER ¾ FLAT BEARING, TAPERED SEAL, BEARING AXLE SPACER TIRE ASSY 13 x 6.5, FLT FREE BOLT ½-13 x 9½ HEX NYLOC NUT ½-13 HEX FLG NYLOC FORK, CASTER BLU WASHER ½ SAE ZERK ZERK STEM, VALVE WHEEL ASSY RIM x 8.5 CENTERED TIRE 26 x - NOT SHOWN TIRE ASSY 13 x 6.5 PNEU (optional)

20 MOWER LIFT / DECK LIFT

21 MOWER LIFT / DECK LIFT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION ROD, LIFT BUSHING, FLANGED 1¼ ID SPRING, EXTENSION STRUT ASSY BUSHING ¾ x 1 SLEEVE BALLJOINT ¾ SWIVEL SPACER, STRUT GUIDE, HEIGHT BAR PIN 7 /16 CLEVIS PIVOT, SPRING NUT 5 /16-18 HEX FLANGE NYLOC PIN, HEIGHT EYEBOLT 4½ NUT 3 /8-16 HEX FLG NYLOC NUT ½-13 HEX FLG NYLOC PIN, STRUT E-RING 5 / DECK LIFT LEVER ASSY BUSHING 1 x 14 GA E-RING E- RING 3 / WASHER, 3 /8 SAE FLT E-RING 7 / RHSNB 5 /16-18 x HHFS ½-13 x PLATE, PILLOW BLOCK ROD, HEIGHT LATCH BAR, HEIGHT SHAFT, RR LIFT SHAFT, LIFT, FT BLOCK, PILLOW LATCH, HEIGHT SWIVEL, HEIGHT LATCH SCREW 3 /8-16 x 3½ HEX FLG KEY 5 /16 SQ x SCREW 5 /8-11 x 3 HEX FLG NUT 5 /8-11 FLG NYLOC SWIVEL, HEIGHT BAR NUT ¾- HEX E-RING ½ CAP, HEIGHT BAR SCREW 5 /16-18 x ¾ HEX SCKT LINK, INDICATOR NUT ¼-20 JAM PLATE, INNER HEIGHT BLU PLATE, OUTER HEIGHT BLU RHSNB 3 /8-16 x 3 GR SPACER, HEIGHT PLATE SCREW 3 /8-16 x 1 HEX FLG BOLT ½ x 2¼, 3 /8-16 SHLDR LATCH, TRANSPORT SPRING, TORSION PEDAL, DECK HEIGHT DECK LIFT CRANK ASSY ARM, CAST LIFT SCREW 5 /16-18 x 1½ HEX FLG E-RING ¾ ARM, LIFT LEVER ARM, LIFT SHAFT, LIFT TRUNION LIFT CHAIN HHFS ½-13 x NUT ½-13 HEX JAM PEDAL, RELEASE BOLT, SHOULDER PAD, FOOT PEDAL SPRING, TORSION 21

22 MOWER DECK / CUTTING DECK Torque to 90 Ft-Lbs 30 22

23 MOWER DECK / CUTTING DECK ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECK w/ SAFETY DECALS BAFFLE, FLOW DIVERTER BLK PULLEY BRACKET, CHUTE PIVOT BLK PULLEY, IDLER 7" NARROW PULLEY, IDLER, 6" SHIELD, BELT BLU BLADE, 21" ZERK NUT ½-13 HEX FLG NYLOC CHUTE, DISCHARGE BRACKET, CHUTE SUPPORT BLK BEARING, IDLER ARM WASHER, HEAVY SCREW 3 /8-16 x 2¾ HEX FLG SHIELD, DUST NUT 3 /8-16 HEX FLG NYLOC HHFS 5 /16-18 x ¾ NUT 5 /16-18 HEX FLANGE NYLOC RHSNB ½-13 x RHSNB ½-13 x 4¾ RHSNB 5 /16-18 x 1½ RHSNB 5 /16-18 x 1¼ WASHER 5 /16 STD FLT HCS 5 /16-18 x WASHER 5 /16 SLW RETAINER, U TYPE SCREW 3 /8-16 x 1 HEX FLG BEARING BLADE BOLT SCREW ½-13 x 1 HEX FLG WASHER 5 /16 DISC SPRING BOLT 5 /16-18 x ½ HEX NYLOC ROLLER, GAUGE TUBE, ROLLER AXLE TUBE, ROLLER AXLE LONG NUT ¼-20 HEX NYLOC BOLT ¼-20 x ¾ CARRIAGE NUT ¾-16 FLG V-RING ARM, IDLER w/ BRGS, SPACR BEARING, IDLER PIVOT BELT, DECK SPINDLE ASSY WASHER 3 /8 THICK BOLT 3 /8-16 x 4½ HEX GR PULLEY, IDLER 7" WIDE EYEBOLT 3 /8 x SPACER, IDLER PIVOT SPRING, TORSION KEEPER, BELT GUIDE, BELT BLK BOLT 3 /8-16 x 2½ CARRIAGE RHSNB 5 /16-18 x SHAFT, SPINDLE CUP, DEBRIS SPACER HUB SHIELD, DUST NOT SHOWN - OPTIONAL BLADE, HIGH LIFT 21" BLADE, LOW LIFT 21" BLADE, GATOR 21" BLADE, WAVY REV LIFT 21" 23

24 SEAT

25 SEAT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION SEAT ASSY PAN, SEAT BLK BOLT 3 /8 x 1¼ 5 /16-18 SHLDR ROD, SEAT RETAINER NUT 3 / NUT 3 /8-16 HEX FLG NYLOC HHFS 3 /8-16 x 1¼ NUT 5 /16-18 HEX FLANGE NYLOC LATCH, SEAT BLK SPRING, TORSION SPRING. SEAT TRACK KIT BOLT 5 /16-18 x 1 THD FRM SWITCH, SEAT STOP, SEAT BLK RHSNB ¼-20 x 5 / NUT ¼-20 HEX THIN NYLOC ARMREST, LT ARMREST, RT SEAT BELT RHSNB 3 /8-16 x COVER, CUSHION COVER, SEAT BACK 25

26 DECALS

27 DECALS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECAL, DEBRIS SCREEN DECAL, MOTION CONTROL DECAL, BATTERY WARNING DECAL, DIXON DECAL, NO STEP DECAL, WARNING DECAL, TRACKING DECAL, DANGER BELT DRIVES DECAL, OIL TANK DECAL, COMMERCIAL DECAL, BLADES DECAL, HOT DECAL, PARK BRAKE DECAL, WARNING DECAL, SEVERING DECAL, ECM DECAL, EXHAUST DECAL, HYDRO BELT DECAL, ROPS, WARNING DECAL, ROPS, DIESEL DECAL, SERVICE, DIESEL DECAL, FUSE, DIESEL DECAL, SPARK ARRESTOR DECAL, BELT ROUTING DECAL, DECAL, DX DECAL, HEIGHT DECAL, HEIGHT 27

28 PROTECTION FRAME

29 PROTECTION FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION BUMPER, MALE STUD ¼ NUT ¼-20 HEX NYLOC HHB 5 /8-18 x 3½ WASHER 5 /8 STD FLAT NUT 5 /8-11 FLG NYLOC LATCH PIN w/ LANYARD PIN, HAIR 29

Parts Manual PZ6029D / PZ29D BF / English

Parts Manual PZ6029D / PZ29D BF / English Parts Manual PZ6029D / 966476701 PZ29D BF / 966554801 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English When you need spare parts