System Width. Panel Width
|
|
- Howard Watson
- 5 years ago
- Views:
Transcription
1 System X X System Primary Panel Panel " Handle Ht. from F.F. ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION Panel LS - PXX-XXP 90 Corner Out - Elevation - Primary Side HNDLE COLOR View 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 1 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
2 System X X System Secondary Panel Panel " Handle Ht. from F.F. ISION NOTES DTE View Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION Panel LS - PXX-XXP 90 Corner Out with 4 Screens - Elevation - Secondary Side HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 2 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
3 12 11 of Head Track line of Head Track line of Head Track Pocket Rough Pocket " Critical Dimension P4 Panel System Rough Opening Locations of Removable Handle Secondary Panel Primary Panel P " Finished wall to finished wall Pocket Rough Pocket P1 Panel P " Critical Dimension Rough Opening System ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Plan Section HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 3 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
4 Corner Post Protrudes into opening Clear Opening Clear Opening Panels in Open Condition Screen Lines of Bottom Track Screen ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Open Plan Section HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 4 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
5 " Shim Space Finished Floor to bottom of your Header Panel System System including Shim Space (Rough Opening ) " Handle Ht. from F.F. ISION NOTES Critical: 1 13 from F.F. to bottom of Bottom Track DTE Critical: 3 from top of Bottom Track to F.F. Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION " 1 2 " Shim Space LS - PXX-XXP 90 Corner Out with 4 Screens - Vertical Section HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 5 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
6 Door Jamb System Patent #6,381,911 Wood framing - Weiland recommends engineered lumber Finished interior most pocket wall finished surface line of Head Track " Finished wall to finished wall 1 4 " " Screen attached to Screen Skirt Follower with Face Interlock, gaskets, & Skirt Panel 2 11 LS Sash with Glass Stop & gaskets Glass & glazing, per specs Center line of exterior most Track " From mounting surface to center of Track 14 1 " From mounting surface to edge of Head Track Pocket Interlock with brush & gasket Finished exterior most pocket wall finished surface Wood framing - Weiland recommends engineered lumber " Critical Dimension Pocket Jacking Screws Clear Opening/Panel line of Head Track Rough Pocket Rough Opening ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Detail - Typical Typical Pocket Interlock HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 6 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
7 Screen Screen with Rear Interlock 4 3 Glass & glazing, per specs LS Sash with Face Interlock, gaskets, Glass Stop, & Stile End Cap " Panel ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Detail - Panel Interlock HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 7 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
8 Secondary Panel: LS Sash with gaskets, Glass Stop, & attached to Corner Post with Finger Pull Screen with Corner Post Screen Screen with brushes & Latch Kit " Panel Screen Primary Panel: LS Sash with Finger Pull, gaskets, Glass Stop, & Removable Handle Glass & glazing, per specs " " 3 7 Panel 3 ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Detail - Corner Post HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 8 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
9 Weiland recommends consulting your Engineer regarding engineered lumber or steel for your header 1 1 8" Header Blocking by others Head Track with wood interior Panel 5 8 " " Story Pole 1 2 " Shim Space 1 5 Screen System System including Shim Space (R.O. ) - Bottom of your Header to F.F. Screen with brushes LS Sash with gaskets & Glass Stop Glass & glazing, per specs line of Jamb/Head Track line of Jamb/Head Track ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Detail - Head Track HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 9 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
10 line of Jamb/Head Track System including Shim Space (R.O. ) System line of Jamb/Head Track Story Pole 1 " per foot slope 4 (min. required) begin at edge of Panel 3 Finished Floor to top of Track (CRITICL) including in Pocket " Finished Floor to bottom of Track Glass & glazing, per specs LS Sash with gaskets, Glass Stop, & Wheel Kit Screen with brushes & Wheel Kit Finished Floor Panel - F.F. to bottom of your Header 2" 1 2 " Shim Space 1-20 llthread (Washer & 4 Nut provided by others) Customer supplied Drip Pan Drainage Track " Bridge Flush Track Grout fill supporting Bottom Track and Flooring ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION LS - PXX-XXP 90 Corner Out with 4 Screens - Detail - Bottom Track (Drainage) HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 10 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
11 Isometric detail is provided as a cutaway for illustrative purposes only, not as a reflection of customer's actual track configuration. See plan details for true condition of bottom track. Unless otherwise specified, default is a staggered bottom track. If full track is required, track must be drainage track. Pan Drain Side Side Side Side Transverse Drains at Panel overlaps O.D. 5/8" I.D. 1/2" Tubing to connect to your exterior drain system (approximately 6" of tubing provided by manufacturer.) Transverse Drain at Pocket/Wall (for pocketing/walled units) ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION Liftslide - Generic Isometric Detail - Bottom Track (Drainage) HNDLE COLOR 1 NTS DB PPROVED S DRWN Windows, Inc to 2014 SPH HNC HNT CYNC CYNT 11 of 12 SCLE ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY DTE
12 NOTES: 1. Default for a pocketing unit is a Removable Handle, unless otherwise noted. 2. Default for a non-pocketing unit is Permanent Handles, unless otherwise noted. 3. Permanent handles will cause a multi-panel system not to sit flush at the side jamb. (see below). 4. Standard Handle is " from Finished Floor to center line. 5. Finger Pull on exterior side. (primary panel only). The default is aluminum painted to match exterior. 39 3/8" To Finished Floor 3" 10" 3 3 3" " " 3 9 Handle Primary Panel ISION NOTES DTE Oceanside, C JOB NME SYSTEM TYPE - CONFIGURTION Typical Detail - Generic Handle Disclaimer HNDLE COLOR SCLE NTS DB PPROVED S DRWN ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Windows, Inc to of 12 DTE
System Width. System Height. AWLS - PXXXXX - Exterior Elevation
System Width System X X X X X Primary Panel Panel 39 3 8 " Handle Ht. from F.F. Pocket Width Panel Width View ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXXXX - Elevation
More informationSystem Width. AWLS - OXX with 2 Screens - Exterior Elevation
System Width O X X System Primary Panel Panel 39 3 8 " Handle Ht. from F.F. ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION View WLS - OXX with 2 Screens - Elevation HNDLE COLOR NTS
More informationSystem Width. Primary Panel. System Height. Panel Height " Finger Pulls Ht. from F.F. AWLS - PX - Exterior Elevation
System Width X System Primary Panel Panel 39 3 8 " Finger Pulls Ht. from F.F. ISION NOTES Pocket Width DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Elevation HNDLE COLOR Panel Width View SCLE NTS
More informationSystem Width. System Height. Panel Height DUE TO SYSTEM EXCEEDING JOB NAME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRACKS.
System Width X X X System Primary Panel Panel 39 3 8 " Finger Pull Ht. from F.F. Pocket Width View ISION NOTES DUE TO SYSTEM EXCEEDING JOB NME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRCKS. DTE
More informationSystem Width O X X O. Primary Panel. Exterior View DUE TO SYSTEM EXCEEDING JOB NAME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRACKS.
System Width O X X O System Primary Panel Panel 39 3 8 " Finger Pull Ht. from F.F. ISION NOTES View DUE TO SYSTEM EXCEEDING JOB NME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRCKS. DTE SYSTEM TYPE
More informationSystem Width. Panel Width. AWLS - O - Exterior Elevation
System Width O System Panel ISION NOTES DTE JOB NME Panel Width SYSTEM TYPE - CONFIGURTION WLS - O - Elevation HNDLE COLOR View SCLE NTS DB ttention: Please take these drawings very seriously and make
More informationTechnical Guide M. MMultiSlide Doors. Technical Guide M1
Technical Guide M MultiSlide Doors M Technical Guide M1 Loewen MultiSlide MultiSlide doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth
More informationLift & Slide W6400. (rev )
Copyright 2010 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Multi-Slide Door Systems (JII043) IMPORTANT INFORMATION AND GLOSSARY. Considerations Before Installation:
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Multi-Slide doors. Read these instructions thoroughly before beginning. They are designed to
More informationLandmark Builders of Montana LANDMARK RESIDENCE TECHNICAL GUIDE L LIFTSLIDE DOORS
Landmark Builders of Montana LANDMARK RESIDENCE TECHNICAL GUIDE L LIFTSLIDE DOORS PRODUCT FEATURES STYLES Jamb or pocketing, single or multipanel systems in stacking, biparting or corner configurations.
More informationMULTISLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
MULTISLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TOOLS AND SUPPLIES 1 TOOLS CHECK LIST 1. laser level 2. hammer 3. pry bars 4. ladders 5. utility knife 6. screw gun 7. applicator foam gun 8. "j"
More informationLIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
Landmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TABLE OF CONTENTS Site Preparation... 3 General Information... 5 Pre-Install Checklist... 6 Flush Track
More informationLiftslide Install IN 8 STEPS STEP CHAPTER PAGE. 1 Overview 2. 2 Setting Up 2. 3 Bottom Track 4. 4 Head Track 6. 5 Side Jambs 7.
Liftslide Install IN 8 STEPS STEP CHAPTER PAGE 1 Overview 2 2 Setting Up 2 3 Bottom Track 4 4 Head Track 6 5 Side Jambs 7 6 Panels 7 7 Flooring, Sealing, & Caulking 9 8 System Care 10 weilandslidingdoors.com
More informationWEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS
CORE WEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS Removing Old Windows Part I - Frame In Although all possible measures have been taken to insure the accuracy of the material
More informationICU TRACKLESS SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and #4 screws Wrenches / Sockets
More informationCurtain Wall Installation Guide
Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather
More information(773) INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GL OSSARY ROUGH OPENINGS
Thank you for selecting C l i m a t e G u a r d products. Attached are our recommended installation instructions for Vinyl windows with an integral (2400-02) will not affect application of the ClimateGuard
More informationStorefront Installation Guide INSTALLATION INSTRUCTIONS
STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.
More informationSeries 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing)
Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration
More information6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
More informationInSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled
InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty
More informationDear Contractor, I am glad that you are interested in our window rebate program.
Dear Contractor, I am glad that you are interested in our window rebate program. I have included three documents with this letter. One is our form to indicate your intention to participate in the program.
More informationPlease read and understand all instructions before beginning. These instructions cover the non-impact aluminum sliding glass door.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationINSTALLATION INSTRUCTIONS. Unit No. 126, 726 Classic Pivot Panel/Door/Panel Shower Enclosure
INSTALLATION INSTRUCTIONS Unit No. 126, 726 Classic Pivot Panel/Door/Panel Shower Enclosure QCI0027 Rev. 0 Page 1 of 10 Certified 11/07/2006 MAINTENANCE: Two primary materials are used to manufacture your
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GLOSSARY ROUGH OPENINGS
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationInstallatIon InstructIons for 2-lIte PatIo Door unassembled
InstallatIon InstructIons for -lite PatIo Door unassembled tools & materials You will need: Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Utility Knife High-Performance Premium Silicone
More informationLandmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
Landmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TABLE OF CONTENTS Site Preparation... 3 General Information... 4 Pre-Install Checklist... 5 Jamb to
More informationWOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationICU TRACK SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and # screws Wrenches / Sockets
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationSite Preparation Information for:
Site Preparation Information for: Product Series - Big Doors Product Type - MultiGlide Door Read these instructions and the Product Safety Information before starting procedure. For: MultiGlide Door Instructions/Videos
More informationMultiSlide Doors. Seamless Indoor/Outdoor Spaces. Nelson Cabin - courtesy Stefan Hampden of CAST architecture
MultiSlide Doors Seamless Indoor/Outdoor Spaces Nelson Cabin - courtesy Stefan Hampden of CAST architecture MULTISLIDE DOORS Contemporary Look Sliding Doors Loewen MultiSlide MultiSlide doors provide large
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail apron
More informationESA-300 Full Breakout
Interior View 0 Installation Instructions For use with ESA II Controler DORMA AUTOMATICS, Inc. 94 Sherwood Drive Toll-Free: 877-67-6 DL844-00 Lake Bluff, IL 60044 Fax: 877-4-7999 Rev. /07 Tools Required:
More information463-GP. Swing Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 463-GP 5/06
463-GP Swing Technical ssistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 (Toll Free) PRTS LIST FRME PCKGE KEY DESCRIPTION PRT QTY SILL 855 1 JM 942 2 E MGNETIC
More informationSliding Glass Door Assembly and Installation Guide
Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all
More informationContemporary 3 Panel Classic 5 Panel French Panel
Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =
More informationSTACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS
STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Picture Frame Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Picture Frame Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More informationSAF-T-LINER MVP-EF PARTS MANUAL. Window Section. Page 5-1. Windows 10/96
Windows Page 5-1 Driver's Standard Page 5-2 Windows Driver's Standard Item Part Num. Number Qty. Description Notes 45001506 1 Sash - Driver's, Assembly, with Tempered Glass 7/32" Complete with Trim, No
More informationSingle-Hung Windows Premium Atlantic Aluminum
TABLE OF CONTENTS Specifications... 2-2 QuickSpecGuide... 2-3 Elevations: Scale Single-Hung-FloridaSizes... 2-4 Grille Patterns... 2-5 SectionDetails: 6 Scale... 2-6 InstallationWallDetails... 2-10 PagethroughthePDFusingthebutonsontheright,
More informationELEPHANT DOOR SYSTEMS SERIES E1200
INSTALLATION INSTRUCTIONS ELEPHANT DOOR SYSTEMS SERIES E1200 Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com AVDB3096 03.13 TABLE OF CONTENTS SUBJECT PAGE GENERAL INSTALLATION
More informationPicture Window and Welded Dead-Lite (Exterior) Tools: (Not Provided by Manufacturer) Fig Supplies: (Not Provided by Manufacturer) Fig.
Picture Window and Welded Dead-Lite (Exterior) Tools: (Not Provided by Manufacturer) Tape Measure Utility Knife Fig. 0-1 Drill Level Putty Knife Pry bar Square Foam Gun (Optional) Caulk Gun Hammer Safety
More informationI n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS
I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS Page 2-9: Installation Instructions, Figures 1, 2, & 3 Page 10-12: Figures A-1, A-2, & A-3: Installation
More informationINSTALLATION INSTRUCTIONS for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) ImpOrTaNT INFOrmaTION & GlOssary.
for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) Thank you for selecting JELD -WEN products. Attached are JELD-WEN s recommended installation instructions for metal clad wood windows
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Premium Atlantic Vinyl Patio Doors (JII018) ImPortAnt InformAtIon & glossary
ASSEMBLY AND INSTALLATION INSTRUCTIONS Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Premium Atlantic vinyl sliding patio doors. Read these
More informationGrand Garden Chalet 6X3 Assembly Manual - Costco
Revision #16 March 22nd, 2013 Grand Garden Chalet 6X3 Assembly Manual - Costco Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use
More informationESA-100 Fixed Sidelite/Non Breakout
/Non Breakout Exterior View Installation Instructions For use with ESA II Controller 1 Tools Required: Suggested Fasteners Required - (Not supplied) Screwdrivers Small Straight (FlatBlade) - for Terminal
More informationUNIT 5: EXTERIOR DOORS AND WINDOWS
KEY CONCEPTS 1. Identify tools needed for exterior door and window installation 2. Last step to weather proofing the home 3. Steps to installing exterior doors and windows 4. Maintenance and safety of
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationCROSS SECTIONS OF PATIO DOORS
CROSS SECTIONS OF PATIO DOORS MOUNTING OPTIONS FOR A SINGLE DREAMSCREEN OPTION A Attach the housing to a 1 x 2 rectangular aluminum tube that is attached to the stile (frame) of the fixed patio door panel.
More informationShed Assembly Instructions
Shed Kit Contents The shed kit includes all the parts needed to assemble your shed except for tools and fasteners such as screws and nails. The various pieces are pre-cut and many are marked to indicate
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.
More informationThermally Broken Framing and Door Installation
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationProviding 3 Layers of Protection
Providing 3 Layers of Protection Barrier 1: Barrier 2: Barrier 3: Integrate the Opening Seal the Exterior Seal the Interior Standard Integral Flange After Housewrap Standard Window Integral Flange After
More information675 Quick N Stall Neo Angle Framed Hinge Shower Enclosure
INSTALLATION INSTRUCTIONS 675 Quick N Stall Neo Angle Framed Hinge Shower Enclosure Call Technical Dept @ 1-800-452-2726 QCI1003 Page 1 of 9 Certified 10/01/09 INSTALLATION NOTES: Unpack your unit carefully
More informationESA-200 Fixed Sidelite
Exterior View Installation Instructions For use with ESA II Controller 1 Tools Required: Suggested Fasteners Required - (Not supplied) Screwdrivers Small Straight (FlatBlade) - for Terminal Block wiring
More informationSliding Doors S l i d i n g W i n d o w s R o l l e r S h u t t e r s
Sliding Doors S l i d i n g W i n d o w s R o l l e r S h u t t e r s The SALIENT 55 sliding window system The SALIENT 70 sliding window and door system The SALIENT 90 heavy-duty sliding door and window
More informationWindow with Nail fin (New construction)
Window with Nail fin (New construction) Disclaimer: Improper installation and care may void warranty. These instructions are a basic/general recommendation for installation, but may not be utilized in
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING BASEMENT EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail
More informationINOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS
INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.
More informationSuperior by Design. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
Superior by Design. Euro PIVOT Door INSTALLATION GUIDE Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 22410 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING
More informationUNIT No. 1415NP / 1715NP / 1815NP INFINITY FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE WITH NO INLINE POST
INSTALLATION INSTRUCTIONS UNIT No. 1415NP / 1715NP / 1815NP INFINITY FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE WITH NO INLINE POST QCI0240 Page 1 of 13 Certified 8/2/10 INSTALLATION NOTES: Unpack your
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Premium Atlantic Aluminum (6800) Bypass Sliding Patio Doors (JII020) IMPORTANT INFORMATION AND GLOSSARY
for Premium Atlantic Aluminum (6800) Bypass Sliding Patio Doors (JII020) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Premium Aluminum Sliding
More informationSERIES 4070-T GENERAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
Table of Contents I. Care and Maintenance... 2 II. Tools / Materials, Sealant Requirements, & Anchor Instructions... 2 III. Structure Verification & Sub-Sillpan Installation... 3 1. Opening Verification...3
More informationTHANK YOU FOR PURCHASING FROM HERITAGE PATIOS
Installation Guide THANK YOU FOR PURCHASING FROM HERITAGE PATIOS Your purchase is engineered by nearly a half century of commercial and residential product design proudly manufactured in the USA from responsibly
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More informationPIVOT DOOR 3400P INSTALLATION INSTRUCTIONS
Table of Contents I. Tools, Sealant Requirements, Anchor Recommended Table...1 II. Opening, Frame & Panel Verification...2-3 III. Frame Assembly...4 IV. Frame Installation...5-7 V. Glazing Instructions...8
More informationVINYL REPLACEMENT WINDOW INSTALLATION STANDARDS
VINYL REPLACEMENT WINDOW INSTALLATION STANDARDS BEFORE you start to remove the existing windows Place clean drop cloths in all work areas. Re-measure the opening to ensure the new window will fit. Remove
More informationMaterials. Description Quantity/Size Material Foundation Drainage material. 1.4 cu. yd. Compactible gravel
This 8 12-ft. shed features a simple gable roof, double doors, and side and rear windows for natural lighting. With full-height walls and doors, there's ample room for storing large items or creating a
More informationInstallation Instructions for Vista Air Vertically Folding Walls
Installation Instructions for Vista Air Vertically Folding Walls Use these instructions in conjunction with your shop drawings to see the specifics that are particular to the model you are installing.
More informationYSD 400 Sliding Door System Installation Manual
System Installation Manual 2006 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS DESCRIPTION
More informationIn the 30-plus years that I ve been a remodeling contractor, I ve
New Window in Redundant s and attention to detail keep out air and water By Mike Sloggatt In the 30-plus years that I ve been a remodeling contractor, I ve replaced hundreds of windows. The difficulties
More informationHow To Install Windows: Nail-Fin Application
How To Install Windows: Nail-Fin Application Required Tools & Materials: Materials: 1 3/4" galvanized roofing nails. Nails must penetrate at least 1" into framing For mulled and/or DP50 or above units:
More informationINSTALLATION GUIDELINES: X25 SERIES using perimeter installation fin
INSTALLATION GUIDELINES: X25 SERIES using perimeter installation fin Wall systems designed to manage water or that have been upgraded to manage water are important for a trouble free installation. Site
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationSERIES 3070-T MULTI-SLIDE ASSEMBLY & INSTALLATION INSTRUCTIONS
Table of Contents I. Care and Maintenance...2 II. Tools / Material & Sealant Requirements...2 III. Assembly and Installation...2 IV. Glazing Assembly...3 V. Panel Assembly...3 1. X Panel...3 2. O Panel...4
More informationIllustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty.
Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. Exterior Glazed Back Members for 1" Glass Illustration Part Description Base List Weight/ Ft./ Box Price/S.L. S.L. S.L. Qty.
More informationNEW HOME WARRANTY A REFERENCE GUIDE FOR TYPICAL WALL AND WINDOW DETAILS (RAINSCREEN SYSTEM) SHOWN AS FIBRE CEMENT CLADDING
NEW HOME WARRANTY A REFERENCE GUIDE FOR TYPICAL WALL AND WINDOW DETAILS (RAINSCREEN SYSTEM) SHOWN AS Reference Guide 0.1 GENERAL 0.1 Reference Guide 0.2 Index 0.3 Disclaimer & Limitations 0.4 General Notes
More information3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS
3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure
More informationVisions 2000 Single Hung Tilt Window Parts Reference Catalog
Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung
More informationwindow installation Guide wood FRaMinG New Construction
window installation Guide wood FRaMinG New Construction IMPORTANT NOTICES AND INFORMATION Read these instructions in their entirety prior to installing windows. Any local building code requirements supersede
More informationQCI0029 REV. 1 Page 1 of 11 Certified 07/06/05
QCI0029 REV. 1 Page 1 of 11 Certified 07/06/05 MAINTENANCE: Two primary materials are used to manufacture your new Basco enclosure: tempered glass and anodized aluminum. To assure a long lasting finish
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e Download 12,000 More Shed Plans Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More informationHOW TO BUILD A 12X8 SHED
HOW TO BUILD A 12X8 SHED With Illustrations, Drawings & Step By Step Details Note: This is a sample plan from RyanShedPlans. All other plans in our collection goes indepth with more details, more instructions,
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Standard Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Standard Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More information4-lite Patio Door. Installation Instructions
4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e H O W B U I L D S H E D.
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e H O W B U I L D S H E D. C O M Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More information1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A
1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationDouble Beam Freestanding Pergola Installation Guide
Double Beam Freestanding Pergola Installation Guide Patent Pending. Copyright 2011 USAVinyl, LLC - All Rights Reserved The information contained in these instructions are proprietary to USAVinyl, LLC and
More informationTESTED FOR Report No. : A04H-009 Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of Railroad Street Corona, CA 91720
TESTED FOR Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed
More informationVYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4
VYTEX PREMIUM SLIDING GLASS DOOR Table of Contents Precautions and Safety 2 Tools Required...3 Inspect and Prepare Door...4 Hardware and Parts Check List....4 Master Frame Assembly 5 Master Frame Installation..7
More informationUnit No. 1413NP, 1713NP, 1813NP Infinity Continuous Hinge Frameless Door & Inline Panel with No Post Shower Enclosure
INSTALLATION INSTRUCTIONS Unit No. 1413NP, 1713NP, 1813NP Infinity Continuous Hinge Frameless Door & Inline Panel with No Post Shower Enclosure QCI0239 Page 1 of 12 Certified 8/2/10 MAINTENANCE: Two primary
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More information