System Width. System Height. Panel Height DUE TO SYSTEM EXCEEDING JOB NAME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRACKS.
|
|
- Maximilian Davis
- 5 years ago
- Views:
Transcription
1 System Width X X X System Primary Panel Panel " Finger Pull Ht. from F.F. Pocket Width View ISION NOTES DUE TO SYSTEM EXCEEDING JOB NME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRCKS. DTE SYSTEM TYPE - CONFIGURTION WLS - PXXX - Elevation HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
2 26 " Finished wall to finished wall System Width Locations for Removable Handle line of Head Track line of Head Track P P2 P3 Pocket Width 5 8 " Critical Dimension Rough Pocket Width Rough Opening Width Panels in open condition Lines of Bottom Track Clear Opening ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXX - Plan Section HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
3 0 5 Finished Floor to bottom of your Header Panel System System including Shim Space (Rough Opening ) " Handle Ht. from F.F. ISION NOTES Critical: 3 from F.F. to bottom of Bottom Track Critical: 3 from top of Bottom Track to F.F. DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXX - Vertical Section HNDLE COLOR 2 8 " SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
4 Door Jamb System Patent #6,38,9 Wood framing - Weiland recommends engineered lumber Finished interior most pocket wall finished surface line of Head Track 2 Finished wall to finished wall Follower with Face Interlock, gaskets, & Skirt Panel Center line of exterior most Track 7" WLS Sash with Glass Stop & gaskets " From mounting surface to center of Track 4 " From mounting surface to edge of Head Track 5 8 " Pocket Interlock with brush & gasket Finished exterior most pocket wall finished surface Wood framing - Weiland recommends engineered lumber 5 8 " Critical Dimension Pocket Width Jacking Screws Clear Opening/ line of Head Track Rough Pocket Width Rough Opening Width ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXX - Detail - Pocket Interlock HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
5 4 8 " WLS Sash with gaskets, Glass Stop, & Rear Wood Cover " WLS Sash with gaskets, Glass Stop, & Rear Interlock 3 2 " ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXX - Detail - Panel Interlock HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
6 line of Head Track 3 2 " 5 8 " 3 Jamb with wood interior Jacking Screw Door Jamb System Patent #6,38,9 Customer's wall line of Head Track WLS Sash with Finger Pull, gaskets, Glass Stop, & Removable Handle System Width Rough Opening Width 5 ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXX - Detail - Side Jamb HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
7 Door Jamb System Patent #6,38,9 Weiland recommends consulting your Engineer regarding engineered lumber or steel for your header 8" Header Blocking by others Jacking Screw Head Track with wood interior Finished Floor to bottom of your Header Panel 2 4 " " System System including Shim Space (R.O. ) Story Pole ISION NOTES WLS Sash with gaskets & Glass Stop line of Jamb/Head Track DTE JOB NME SYSTEM TYPE - CONFIGURTION 0 5 WLS - PXXX - Detail - Head Track HNDLE COLOR line of Jamb/Head Track SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
8 Drainage Track Patent #7,007,343 line of Jamb/Head Track line of Jamb/Head Track Panel - F.F. to bottom of your Header WLS Sash with gaskets, Glass Stop, & Wheel Kit " per foot slope 4 (min. required) begin at edge of Panel 3 Finished Floor to top of Track (CRITICL) including in Pocket Finished Floor Story Pole System System including Shim Space (R.O. ) 2 5 (CRITICL) Min. Slot Depth from Finished Floor 3 Finished Floor to bottom of Track 2" 2 " Shim Space Grout fill supporting Bottom Track and Flooring Customer supplied Drip Pan 2 8 " Bridge Width -20 llthread (Washer & 4 Nut provided by others) Drainage Track ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXX - Detail - Bottom Track (Patented Flush Drainage) HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
9 Drainage Track Patent #7,007,343 Isometric detail is provided as a cutaway for illustrative purposes only, not as a reflection of customer's actual track configuration. See plan details for true condition of bottom track. Unless otherwise specified, default is a staggered bottom track. If full track is required, track must be drainage track. Pan Drain Side Side Transverse Drains at Panel overlaps Transverse Drain at Pocket/Wall (for pocketing/walled units) O.D. 5/8" I.D. /2" Tubing to connect to your exterior drain system (approximately 6" of tubing provided by manufacturer.) ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION Liftslide - Generic Isometric Detail - Bottom Track (Patented Flush Drainage) HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
System Width O X X O. Primary Panel. Exterior View DUE TO SYSTEM EXCEEDING JOB NAME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRACKS.
System Width O X X O System Primary Panel Panel 39 3 8 " Finger Pull Ht. from F.F. ISION NOTES View DUE TO SYSTEM EXCEEDING JOB NME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRCKS. DTE SYSTEM TYPE
More informationSystem Width. Primary Panel. System Height. Panel Height " Finger Pulls Ht. from F.F. AWLS - PX - Exterior Elevation
System Width X System Primary Panel Panel 39 3 8 " Finger Pulls Ht. from F.F. ISION NOTES Pocket Width DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Elevation HNDLE COLOR Panel Width View SCLE NTS
More informationSystem Width. AWLS - OXX with 2 Screens - Exterior Elevation
System Width O X X System Primary Panel Panel 39 3 8 " Handle Ht. from F.F. ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION View WLS - OXX with 2 Screens - Elevation HNDLE COLOR NTS
More informationSystem Width. System Height. AWLS - PXXXXX - Exterior Elevation
System Width System X X X X X Primary Panel Panel 39 3 8 " Handle Ht. from F.F. Pocket Width Panel Width View ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXXXX - Elevation
More informationSystem Width. Panel Width
System X X System Primary Panel Panel 39 3 8 " Handle Ht. from F.F. ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION Panel LS - PXX-XXP 90 Corner Out - Elevation - Primary Side HNDLE
More informationSystem Width. Panel Width. AWLS - O - Exterior Elevation
System Width O System Panel ISION NOTES DTE JOB NME Panel Width SYSTEM TYPE - CONFIGURTION WLS - O - Elevation HNDLE COLOR View SCLE NTS DB ttention: Please take these drawings very seriously and make
More informationLiftslide Install IN 8 STEPS STEP CHAPTER PAGE. 1 Overview 2. 2 Setting Up 2. 3 Bottom Track 4. 4 Head Track 6. 5 Side Jambs 7.
Liftslide Install IN 8 STEPS STEP CHAPTER PAGE 1 Overview 2 2 Setting Up 2 3 Bottom Track 4 4 Head Track 6 5 Side Jambs 7 6 Panels 7 7 Flooring, Sealing, & Caulking 9 8 System Care 10 weilandslidingdoors.com
More informationLIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
Landmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TABLE OF CONTENTS Site Preparation... 3 General Information... 5 Pre-Install Checklist... 6 Flush Track
More informationICU TRACKLESS SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and #4 screws Wrenches / Sockets
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Picture Frame Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Picture Frame Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More informationMULTISLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
MULTISLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TOOLS AND SUPPLIES 1 TOOLS CHECK LIST 1. laser level 2. hammer 3. pry bars 4. ladders 5. utility knife 6. screw gun 7. applicator foam gun 8. "j"
More informationSite Preparation Information for:
Site Preparation Information for: Product Series - Big Doors Product Type - MultiGlide Door Read these instructions and the Product Safety Information before starting procedure. For: MultiGlide Door Instructions/Videos
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More information6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
More informationLift & Slide W6400. (rev )
Copyright 2010 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.
More information(773) INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GL OSSARY ROUGH OPENINGS
Thank you for selecting C l i m a t e G u a r d products. Attached are our recommended installation instructions for Vinyl windows with an integral (2400-02) will not affect application of the ClimateGuard
More informationInstalling a Weiland Beefy Bifold
Installing a Weiland Beefy Bifold In 9 steps Table Of Contents 1. Overview 2 2. Setting Up 2 3. Bottom Track 3 4. Head Track and Side Jambs 4 5. Panels 4 6. Fine Tuning the System 5 7. Notes on Flooring
More informationLandmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
Landmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TABLE OF CONTENTS Site Preparation... 3 General Information... 4 Pre-Install Checklist... 5 Jamb to
More informationHow To Install Windows: Nail-Fin Application
How To Install Windows: Nail-Fin Application Required Tools & Materials: Materials: 1 3/4" galvanized roofing nails. Nails must penetrate at least 1" into framing For mulled and/or DP50 or above units:
More informationCurtain Wall Installation Guide
Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GLOSSARY ROUGH OPENINGS
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationLandmark Builders of Montana LANDMARK RESIDENCE TECHNICAL GUIDE L LIFTSLIDE DOORS
Landmark Builders of Montana LANDMARK RESIDENCE TECHNICAL GUIDE L LIFTSLIDE DOORS PRODUCT FEATURES STYLES Jamb or pocketing, single or multipanel systems in stacking, biparting or corner configurations.
More informationICU TRACK SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and # screws Wrenches / Sockets
More informationVYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4
VYTEX PREMIUM SLIDING GLASS DOOR Table of Contents Precautions and Safety 2 Tools Required...3 Inspect and Prepare Door...4 Hardware and Parts Check List....4 Master Frame Assembly 5 Master Frame Installation..7
More informationESA-100 Fixed Sidelite/Non Breakout
/Non Breakout Exterior View Installation Instructions For use with ESA II Controller 1 Tools Required: Suggested Fasteners Required - (Not supplied) Screwdrivers Small Straight (FlatBlade) - for Terminal
More informationTechnical Guide M. MMultiSlide Doors. Technical Guide M1
Technical Guide M MultiSlide Doors M Technical Guide M1 Loewen MultiSlide MultiSlide doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth
More informationSeries 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing)
Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration
More informationContemporary 3 Panel Classic 5 Panel French Panel
Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =
More information463-GP. Swing Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 463-GP 5/06
463-GP Swing Technical ssistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 (Toll Free) PRTS LIST FRME PCKGE KEY DESCRIPTION PRT QTY SILL 855 1 JM 942 2 E MGNETIC
More information1 PREPARE HEADER AND ROUGH OPENING
CONTENTS. HEADER & TRACK ASSEMBLY. END BRACKET PLAIN 3. FLOOR PLATE.. 8. 4. SPLIT STUD 6 5. CARRIER (987) 6. QUICK RELEASE PLATE (960) 7. DOOR GUIDE SET (9883) 3. 4. 7. 8. BUMPER KIT (988) 9. #8 X 3/4
More informationESA-300 Full Breakout
Interior View 0 Installation Instructions For use with ESA II Controler DORMA AUTOMATICS, Inc. 94 Sherwood Drive Toll-Free: 877-67-6 DL844-00 Lake Bluff, IL 60044 Fax: 877-4-7999 Rev. /07 Tools Required:
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationPlease read and understand all instructions before beginning. These instructions cover the non-impact aluminum sliding glass door.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Standard Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Standard Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationINSTALLATION INSTRUCTIONS. Unit No. 126, 726 Classic Pivot Panel/Door/Panel Shower Enclosure
INSTALLATION INSTRUCTIONS Unit No. 126, 726 Classic Pivot Panel/Door/Panel Shower Enclosure QCI0027 Rev. 0 Page 1 of 10 Certified 11/07/2006 MAINTENANCE: Two primary materials are used to manufacture your
More informationStorefront Installation Guide INSTALLATION INSTRUCTIONS
STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationSliding Glass Door Assembly and Installation Guide
Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationSERIES 4070-T GENERAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
Table of Contents I. Care and Maintenance... 2 II. Tools / Materials, Sealant Requirements, & Anchor Instructions... 2 III. Structure Verification & Sub-Sillpan Installation... 3 1. Opening Verification...3
More informationwestern window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels
series 2600 multi-slide non-pocket 2-1/4 panels windowsystems.com windowsystems.com movement, which can cause warping and other problems. Frame kit components: Each door will have a head assembly, a threshold
More informationMaterials. Description Quantity/Size Material Foundation Drainage material. 1.4 cu. yd. Compactible gravel
This 8 12-ft. shed features a simple gable roof, double doors, and side and rear windows for natural lighting. With full-height walls and doors, there's ample room for storing large items or creating a
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail apron
More informationESA-200 Fixed Sidelite
Exterior View Installation Instructions For use with ESA II Controller 1 Tools Required: Suggested Fasteners Required - (Not supplied) Screwdrivers Small Straight (FlatBlade) - for Terminal Block wiring
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e Download 12,000 More Shed Plans
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e Download 12,000 More Shed Plans Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationWindow with Nail fin (New construction)
Window with Nail fin (New construction) Disclaimer: Improper installation and care may void warranty. These instructions are a basic/general recommendation for installation, but may not be utilized in
More informationHOW TO BUILD A 12X8 SHED
HOW TO BUILD A 12X8 SHED With Illustrations, Drawings & Step By Step Details Note: This is a sample plan from RyanShedPlans. All other plans in our collection goes indepth with more details, more instructions,
More informationMulling & Transom General Installation Instructions
1. Overview: This document outlines general recommended instructions for combining Fleetwood s window and door products in the field. Additional detailed information on mulling and transoms is also available
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e H O W B U I L D S H E D.
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e H O W B U I L D S H E D. C O M Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More informationI n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS
I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS Page 2-9: Installation Instructions, Figures 1, 2, & 3 Page 10-12: Figures A-1, A-2, & A-3: Installation
More informationUNIT 5: EXTERIOR DOORS AND WINDOWS
KEY CONCEPTS 1. Identify tools needed for exterior door and window installation 2. Last step to weather proofing the home 3. Steps to installing exterior doors and windows 4. Maintenance and safety of
More informationProviding 3 Layers of Protection
Providing 3 Layers of Protection Barrier 1: Barrier 2: Barrier 3: Integrate the Opening Seal the Exterior Seal the Interior Standard Integral Flange After Housewrap Standard Window Integral Flange After
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationDear Contractor, I am glad that you are interested in our window rebate program.
Dear Contractor, I am glad that you are interested in our window rebate program. I have included three documents with this letter. One is our form to indicate your intention to participate in the program.
More information2820 Series 42" A.F.F. TO CENTER OF PULL HANDLE 34" TO CENTER OF LOCKSET. ENTRANCE-ARCADIA-NONTHERMAL-2820-ALL-SERIES.pdf
Z:\01 UPDATED FILES\01 CAD\02 ENTRANCES\02 S\06 2820 \SERIES\ENTRANCE-ARCADIA-NNTHERMAL-2820-ALL-SERIES.DWG Detail: Vertical Stiles Scale: 6" = 1'-0" SHEET 1 F 8 Z:\01 UPDATED FILES\01 CAD\02 ENTRANCES\02
More information3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS
3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure
More informationWEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS
CORE WEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS Removing Old Windows Part I - Frame In Although all possible measures have been taken to insure the accuracy of the material
More informationPicture Window and Welded Dead-Lite (Exterior) Tools: (Not Provided by Manufacturer) Fig Supplies: (Not Provided by Manufacturer) Fig.
Picture Window and Welded Dead-Lite (Exterior) Tools: (Not Provided by Manufacturer) Tape Measure Utility Knife Fig. 0-1 Drill Level Putty Knife Pry bar Square Foam Gun (Optional) Caulk Gun Hammer Safety
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Multi-Slide Door Systems (JII043) IMPORTANT INFORMATION AND GLOSSARY. Considerations Before Installation:
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Multi-Slide doors. Read these instructions thoroughly before beginning. They are designed to
More information5S3-GP. Steam Swing Door with Double In-Line Panels
53-GP team wing with Double In-Line s Technical ssistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (entral Time) 1-877-723-7190 (Toll Free) PRT LIT FRME PGE EY DERIPTION PRT QTY ILL 855 1 JM
More informationIn the 30-plus years that I ve been a remodeling contractor, I ve
New Window in Redundant s and attention to detail keep out air and water By Mike Sloggatt In the 30-plus years that I ve been a remodeling contractor, I ve replaced hundreds of windows. The difficulties
More informationINSTALLATION INSTRUCTIONS for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) ImpOrTaNT INFOrmaTION & GlOssary.
for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) Thank you for selecting JELD -WEN products. Attached are JELD-WEN s recommended installation instructions for metal clad wood windows
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationInSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled
InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty
More informationINOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS
INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.
More informationSAF-T-LINER MVP-EF PARTS MANUAL. Window Section. Page 5-1. Windows 10/96
Windows Page 5-1 Driver's Standard Page 5-2 Windows Driver's Standard Item Part Num. Number Qty. Description Notes 45001506 1 Sash - Driver's, Assembly, with Tempered Glass 7/32" Complete with Trim, No
More informationGrand Garden Chalet 6X3 Assembly Manual - Costco
Revision #16 March 22nd, 2013 Grand Garden Chalet 6X3 Assembly Manual - Costco Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use
More informationShed Assembly Instructions
Shed Kit Contents The shed kit includes all the parts needed to assemble your shed except for tools and fasteners such as screws and nails. The various pieces are pre-cut and many are marked to indicate
More informationAssembly Instructions. Important!
Play Action Spiral Tube Slide Assembly Instructions Important! Intended for residential use by children ages 2 to 10, only on properly installed PlayStar playsets. Before use refer to complete safety guidelines
More information1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle.
1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle. 3. Remove the 12 screws that attach the steel interior door
More informationSuperior by Design. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
Superior by Design. Euro PIVOT Door INSTALLATION GUIDE Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 22410 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING
More information8/7/ HP SWING DOOR INSTALLATION INSTRUCTIONS
8/7/17 1200 HP SWING DOOR INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction These instructions were developed and tested for use with typical construction in a wall system designed
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING BASEMENT EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail
More informationUnit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
More informationChapter 18. Interior Doors
Chapter 18. Interior Doors 18.1 SWINGING DOORS 18.2 SLIDING DOORS 18.3 BIFOLD DOORS Tools needed by volunteers: Hammer Nail apron Tape measure Square Pencil Tools and equipment needed: Extension cords
More informationKestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version
Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012 Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet
More informationModel 6100 Illustrated Installation Instructions Contractors Wardrobe
Model 6100 Illustrated Installation Instructions Contractors Wardrobe DESIGNERS MANUFACTURERS 26121 Avenue Hall Valencia, CA 91355 (661) 257-17 Fax: (661) 257-4907 Toll Free: (800) CW-DOORS (800) 293-6677
More informationKnock Down Patio Door Assembly Instructions Regular & Impact
Knock Down Patio Door Assembly Instructions Regular & Impact 72 x 80 72 x 82 72 x 96 96 x 80 96 x 82 96 x 96 Impress the Weather KD Patio Door Regular & Impact Sizes 72 x 80 72 x 82 72 x 96 96 x 80 96
More informationELEPHANT DOOR SYSTEMS SERIES E1200
INSTALLATION INSTRUCTIONS ELEPHANT DOOR SYSTEMS SERIES E1200 Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com AVDB3096 03.13 TABLE OF CONTENTS SUBJECT PAGE GENERAL INSTALLATION
More informationAssembly Instructions. Important!
Play Action Spiral Tube Slide Assembly Instructions Important! Intended for residential use by children ages 2 to 10, only on properly installed PlayStar playsets. Before use refer to complete safety guidelines
More informationVinyl Windows Manufactured by VPI Quality Windows
Vinyl Windows Manufactured by VPI Quality Windows Part Number: 531&591 Installation 531 & 591 SERIES SLIDING AND HUNG WINDOW INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction.
More informationwindow installation Guide wood FRaMinG New Construction
window installation Guide wood FRaMinG New Construction IMPORTANT NOTICES AND INFORMATION Read these instructions in their entirety prior to installing windows. Any local building code requirements supersede
More informationASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit
ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer
More informationCROSS SECTIONS OF PATIO DOORS
CROSS SECTIONS OF PATIO DOORS MOUNTING OPTIONS FOR A SINGLE DREAMSCREEN OPTION A Attach the housing to a 1 x 2 rectangular aluminum tube that is attached to the stile (frame) of the fixed patio door panel.
More informationINSTALLATION GUIDELINES: X25 SERIES using perimeter installation fin
INSTALLATION GUIDELINES: X25 SERIES using perimeter installation fin Wall systems designed to manage water or that have been upgraded to manage water are important for a trouble free installation. Site
More informationVersatrim Side-Snap Frame
Versatrim Side-Snap Frame net door width finished opening width rough opening width (finished opening width plus 1 1/2") Figure 1 Cross section of strike and hinge jambs The rough opening width is equal
More informationInstallatIon InstructIons for 2-lIte PatIo Door unassembled
InstallatIon InstructIons for -lite PatIo Door unassembled tools & materials You will need: Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Utility Knife High-Performance Premium Silicone
More information1. VERIFY ALL COMPONENTS
R INSTALLATION INSTRUCTIONS RAGNAR+ODEN FACE MOUNT, BYPASSING. VERIFY ALL COMPONENTS BASE KIT Track stand-offs Front trolley kit * Rear trolley kit * Allen keys Track fastener kit - wood - Bottom guide
More informationINSTALLATION INSTRUCTIONS for Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for metal clad wood windows with nailing fin or primed wood windows with exterior trim. While the
More informationAluminum Sprinter Rack Installation
INSTALLATION INSTRUCTIONS MyGlassTruck.com Division of Demountable Concepts, Inc Aluminum MyGlassTruck.Com Demountable Concepts, Inc. 200 Acorn Rd. Glassboro, NJ 08028 800.254.3643 toll free 856.863.0900
More informationInstallation Guide for Andersen 400 Series Tilt-Wash Transom and 200 Series Narroline Transom Windows
for Andersen 400 Series Tilt-Wash Transom and 200 Series Narroline Transom Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Premium Atlantic Aluminum (6800) Bypass Sliding Patio Doors (JII020) IMPORTANT INFORMATION AND GLOSSARY
for Premium Atlantic Aluminum (6800) Bypass Sliding Patio Doors (JII020) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Premium Aluminum Sliding
More informationWOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
More informationPicture Window Rough Opening Installation with Sheathing Intact with Brickmould Tools: (Not supplied by manufacturer) Fig. 0-1
Picture Window Rough Opening Installation with Sheathing Intact with Brickmould Tools: (Not supplied by manufacturer) Tape Measure Drill Level Putty Knife Square Foam Gun Utility Knife Caulk Gun Hammer
More information