New York City College of Technology Division of Continuing Education. Building Information Modeling with Revit Day 6 extras. Core Stairs & Elevators

Transcription

1 New York City College of Technology Division of Continuing Education Building Information Modeling with Day 6 extras Core s & s Professor Paul C. King, RA, AIA, ARA Prof.Paul.King@Gmail.com

2 Flip Door Electric -doorcenter Floor Slab : Edit Main Floor (143-0 ½ ) - Current Level Select Edge of Slab and then Edit Boundary Hint: Use Filter Selection to select floors

3 Floor Slab : Edit Flip Door Electric -doorcenter Offset from edge of existing floor slab to allow for stair save sketch

4 Floor Slab : Draw Guidelines Flip Door Electric -doorcenter Offsets: Using Model Lines draw two guidelines for the center of the stair runs

5 : by sketch Flip Door Electric -doorcenter Set Base and Top Levels Width = 4-0 Using Model Lines draw two guidelines for the center of the stair runs

6 Flip : Switch Direction Switch the direction of the stair so that the top run connects to the landing Door Electric -doorcenter

7 : Repeat for opposite corner creation of stair step-by-step or mirror the stair from the opposite corner Flip Door Electric -doorcenter Main Floor Offset and to face of wall

8 : Autodesk Seek Manufacturer Family Flip Door Electric -doorcenter Seek.Autodesk.com Search: Door (select elevator door center)

9 : Autodesk Seek Manufacturer Family Flip Door Electric -doorcenter Open the Door Family and get familiar with is construction the Process to get the line work for the We will be combining the two to create our own elevator doors with Cab

10 : Autodesk Seek Manufacturer Family Flip Door Electric -doorcenter Seek.Autodesk.com Search: Electric

11 : Autodesk Seek Electric Flip Door Electric -doorcenter Research your elevator needs Select Family Types Pick a size that matches your need

12 Flip Door Electric -doorcenter : Autodesk Seek Electric In plan view select Ref. Level Select across the plan Filter and remove the elevator at top Select only 2d Linework Group the selected linework together Name it : Linework

13 Flip : Autodesk Seek Electric With the Group Selected Choose Copy to Clipboard Go to Door-Center.RFA Paste from clipboard Door Electric -doorcenter Save_as new family : Plan with Door-Center

14 Family: Plan with Door-Center Flip Door Electric -doorcenter Align the elevator cab with the face of the wall Load the compiled elevator with door into your project file Center the elevator door with the door for the floor

15 : Insert New Component Flip Door Electric -doorcenter

16 : Edit Walls - Paste Aligned to Select Levels Flip Remember to use a wall with a C-H stud to enclose the elevator Door Electric -doorcenter

17 : Add to Slabs Flip Door Electric -doorcenter

18 with Create 5 New Levels for the Tower Flip Door Electric -doorcenter Offset Main Floor 10 Rename to TOWER 1 Offset TOWER 1 to create up to TOWER 5 will be named with TOWER Prefix

19 Flip Door Electric -doorcenter with is located 8 beyond the face of the interior of the wall to support the concrete block

20 Flip Door Electric -doorcenter with Tower 1 Tower 5 The shaft should extend from Tower 1 to Tower 5

21 with Flip Door Electric -doorcenter Add Guidelines to create the stair from Main Floor to Tower 1 Draw across for 9 risers then down and back for 9 more

22 Views of with Multistory Flip Door Electric -doorcenter Completed View should begin on level TOWER 1 and extend to TOWER 5 The exterior wall should be modified to have a TOP OFFSET of 3 so no rail is required

23 Flip Door Electric -doorcenter Day 12 - Remove Corners Guidelines By sketch Flip Repeat Autodesk Seek Door Electric -door-center Insert Copy/Paste Levels Slab Overview