3D Weaving Innovation Centre Disruption to Clothworker South

Size: px

Start display at page:

Download "3D Weaving Innovation Centre Disruption to Clothworker South"

Loraine Cannon
5 years ago
Views:

1 3D Weaving Innovation Centre Disruption to Clothworker outh Refurbishment works are continuing within the Clothworkers outh building as part of the 3D Weaving Innovation Centre project. The works have been extended beyond the original due to additional asbestos removal works having to be carried out in the buildings below ground duct zones. The duct zones required clearance to allow for the buildings services to be connected and completed. We are aware that the ongoing works are creating some issues in terms of noise disruption. To minimize the impact of the ongoing works we are implementing the following measures: Works onsite commencing at 6.00am to carry out the most intrusive and prolonged noisy work, prior to commencement of teaching Teaching timetables have been provided to the project team so that other ongoing works can be targeted around scheduled teaching periods All operatives onsite are undergoing tool box talks by William Birch to raise awareness of the impact their refurbishment activities can have on the occupants of Clothworkers outh, and the need for them to work considerately. Floor plans of the building, depicting where works are still ongoing and showing current forecasted, follow within this pdf document. We are continuing to work closely with the occupants of Clothworkers to complete the works as speedily as possible, whilst also being mindful of the buildings day-to-day activities. We apologise for any inconvenience caused. hould you require any further information, please do not hesitate to contact Estates Helpdesk on or

2 Teaching wall, as Electrical DG.29 W.05 Contractor allocated access stairs. Required for use until the end of the project G10 New Rear Entrance Works not progressing at this stage due to structural issues GROUND FLOOR W.04 W.03 3D Weaving Innovation Centre eminar Room 75m² and G30 November 17 Max 60 persons ection of existing landscaping to be removed and paving extended to match existing, refer to drawing no. 143/154/285 Carefully remove secondary glazing, install new Trespa window cills and re-install secondary glazing as NB ref P20/120. Allow for making good existing windows and painting as NB ref M60/130 Female Refer to drawing no. DG.26 DG.25 Raise section of flooring and install Replace existing tiled cills with new steps, as new painted MDF cills and DG.27 tructural Engineer's install new skirting board, as details NB refs P20/110 and P20/200 DG.28 R0/14 DG.23 W.06 R0/15 G09 AWC DG.24 and NB refs and DG. R0/01 and and varnish NB ref G07 Printing Making Wall tiles to be replaced with coloured wall cladding, as NB ref K13/145. walls above cladding and soffit as NB ref. New screen print sink and drainer, as NB ref N10/355 G05 G04a R0/13 DG.20 DG.21 covers, see drawing no. New screen print sink and drainer, as NB ref N10/355 G07 New table with an acrylic top, or Freestanding drying rack as NB ref N10/356 R0/16 DG.19 Drying Rack DG.15 as NB ref Curtain rail in line with existing, as NB ref N10/0 window frames as NB ref M60/130. Fit new blinds as NB G04 G10 X11 DG.18 DG.16 G.01 DG.11 DG.17 NB refs and A16 DG.10 DG.09 R0/11 X13 DG.13 DG.12 R0/02 R0/21 DG.14 afety station or R0/17 DG.08 X07 pur shelving as NB ref N10/160 G03 ize of riser to suit new service layout Washout Booth G08 G08 creen Wash October 17 Drying Cabinet Rack Drying Cabinet as NB ref N10/357 G06 tore as NB ref NB refs DG.07 DG.06 G03a Chemical Trays Washing Machine (Client upplied) DG.05 G02 G11b tudio Bin store as NB ref N10/352 Trespa spur shelving as NB ref N10/161 Trespa benching with mobile underbench units, or DG.04 X09 G01 DG.03 Cleaner's G20 Plant Glass fronted display cases with lighting, 143/154/302 Interactive display wall X15 Display pace Line out existing columns as NB ref K10/205 soffits as NB ref offit hung system for suspending artwork above the Main Entrance, as NB ref N10/351 DG.02 A15 Lobby DG.01 Area of existing floor tiles to be replaced with perforated floor tiles, as the Mechanical Allow for altering the existing raised access floor to form steps down to new emergency escape door X03 DG.48 and and varnish NB ref R0/04 DG.41 DG.47 G11a tudio G15 Make good existing walls, where dividing wall has been demolished. Allow for G15 replacing raised access floor tiles and supports on line of former dividing wall. soffit as NB ref. G19 paving to be ramped up to new entrance, allow for relocating electric car charging points and disabled parking spaces, as drawing no. 143/154/285 Riser X01 reduced in size, existing floor made good, as tructural Engineer's details Allow for maintaining a bulkhead and retaining suspended ceiling, along wall line as NB ref and skirtings as NB refs DG.46 G18 R0/19 November 17 R0/18 DG.45 R0/10 X04 DG.40 X05 DG.37 New Entrance DG.31 Glass fronted display case with lighting, as drawing no. 143/154/302 X01 as NB ref DG.32 DG.43 DG.44 Glazed entrance canopy, as NB B91/330 G.02 NB refs and DG.38 NB refs and DG.42 DG.39 W.07 DG.30 R0/09 DG.33 riser removed, floor made good, as tructural Engineer's details and NB DG.34 refs and G14a Interactive display wall with radiator relocated as NB ref G17 no. G14 tudio DG.36 G13 Cleaner's R0/06 DG.35 R0/08 R0/07 and and varnish NB ref Replace existing ironmongery to doors and make emergency escape only

3 Blockwork infill as tructural NB ref M60/130. FIRT FLOOR Through to Textile Link Block ection of wall to be infilled as tructural Engineer's details, plaster skin and skirting to match existing as NB refs M20/212 and P20/110 Metal cover to be removed and section of flooring to be infilled, as tructural. and and varnish NB ref window frames as NB ref M60/130. Fit new blinds as NB window frames as NB ref M60/130. Fit new blinds as NB D1.19 Riser R1/14 D1.10 Riser R1/15 window frames as NB ref M60/130. Fit new blinds as NB 105 erver Room Truss u/s Post Graduate tudy Room (50 Desks) Max 60 persons soffit, timber and exposed metalwork as NB refs, M60/150 and M60/130 Riser R1/1 D R1/ D1.18 D1.14 D1.08 D D1.07 D X11 D1.16 and Electrical Cupboard D1.13 NB refs and Artwork hanging system as NB ref 1.02 D1.11 Electrical Cupboard D1.05 Photocopier Refer to drawing no. 143/154/281 for kitchenette layout X12 D1.15 X06 R1/12 102a tore Engineer's details, plaster skim and install new skirting to match existing on both sides as NB refs M20/212 and P20/ b Post Graduate Research Area D1.06 Riser afety station or R1/ Floor drain to be installed and connected to existing foul drainage, as Mechanical Engineer's details, as NB ref R11/315 Allow for flexible Trespa laboratory bench units with movable underbench units, as dwg no. or eal and insulate Form openings in soffit for new ventilation, as tructural Engineer's details D1.04 as NB ref D Machinery (Client upplied) Drainage channel covers to be removed and channel to be infilled to floor level. D Infill above existing walls with stud partitioning and acoustic insulation D Freestanding glass screens as NB ref N10/190 Machinery (Client upplied) Plasterboard line over existing metal deck as NB ref K10/ Knit & Weave tudio Truss u/s 4565 Install noticeboards and hanging systems, as dwg no Wet Processing Laboratory 184m² D December 17 4 huttle Loom (Client upplied) soffits as NB ref D Lockable, heavy duty storage units for dyes and polymers, as NB 20 ref N10/135 Floor drain to be installed and connected to existing foul drainage, as Mechanical Engineer's tainless steel sink details, as NB ref R11/315 unit, as NB ref N11/ D1.38 D and and varnish NB ref Paper Making Machine (Client supplied) Looms (Client upplied) Freestanding glass screens as NB ref N10/190 eal and insulate 110 and erver Room as NB ref 112 Chemical tore 7.3m² Heavy duty shelving, as NB ref N10/162 D1.21 R1/19 X02 D1. eal and insulate no. D1.39 D D D D1.28 NB refs and D1.29 X R1/18 X05 X01 D1.34 D1.35 D D1.24 D1.25 A08 D a erver Room 109 A09 and D1.26 system as NB ref D1.30 R1/9 soffit, timber and exposed metalwork as NB refs, M60/150 and M60/130. Tile the first 1.2m of the walls from the finished floor level, as NB ref M40/111 D1.31 All for making good existing suspended ceiling on new wall line 111 Laser Cutting Machine 1.06NB ref M60/ and Corridor 110 Digital Printing Room Max 60 persons Upright racking for 2m long rolls of fabric to be fitted, as dwg no. or 110a Fabric store no. D1.36 Riser R1/8 111 Completion date to be confirmed Refer to drawing no. 143/154/281 for kitchenette layout R1/6 Riser R1/7 window frames as NB ref M60/130. Fit new blinds as NB and and varnish NB ref ing Gantry Extract to be installed through existing window, as Mechanical window frames as NB ref M60/130. Fit new blinds as NB Form a painted timber cupboard around the existing water heater, providing access to the controls and for maintenance Extract to be installed through existing window, as Mechanical window frames as NB ref M60/130. Fit new blinds as NB

4 204 and NB ref M60/130. Fit new blinds as NB ref N10/240 to all windows. NB ref M60/130. Fit new blinds as NB ref N10/241 to all windows. and and varnish NB ref and D2.06 X10 R2/ Cleaning 205 upervisor Tech X11 D2.07 D2.08 D2.09 D2.10 as NB ref 203b tore 203 tudio X09 X08 pur shelving as pur shelving as NB ref N10/160 NB ref N10/160 pur shelving as NB mall whiteboard mall whiteboard ref N10/160 as NB ref as NB ref N10/193 N10/193 Large whiteboard as NB ref N10/193 R2/ Imaging Laboratory Measurement Lab AWC Refer to drawing no. D2.11 D2.13 D2.15 D2.16 D D2.14 D2.18 walls as NB refs walls as NB refs X D2. as NB ref as NB ref D2.12 D2.17 D2.21 Luminaire and Visual October Curtain rail 17 across D2.23 room width, as and Cabinets Laboratory Full height spur shelving LED Cube NB ref N10/0 as NB ref N10/160 Curtain rail across room Lighting Room Digital Eye width, as NB ref N10/0 as NB ref Psychophysics 2.05 as NB ref Visual ystem D2.24 Laboratory N10/358 Roof Access Chem X03 Ladder D2.20 tore Heavy duty shelving for washers / dryers 209a D2.25 and fridges as dwg no. or Plasterboard bulkhead X01 Balance bench as around lifting mechanism X02 dwg no. for LED cube, as dwg no. or Island bench with reagent 143/154/266 window frames as NB ref window frames as NB ref shelf and underbench units M60/130, replace broken panes M60/130, replace broken panes as dwg no. or and apply black out film to all and apply black out film to all panes. Internally line with stud panes. Internally line with stud partition, as NB ref K10/125 partition, as NB ref K10/125 eal and insulate eal and insulate 209 and 209a Install reagent shelf to October existing benching 17 as dwg Roof no. or 2no. new monodraughts Beginning of December 17 as Mechanical Engineer's Replace roof covering Make good and specification and insulate, including paint existing walkways, as NB ref window frames as J41/115 NB ref M60/130. walls 209 and soffit as NB ref Chemistry Laboratory X12 and and varnish NB ref NB ref M60/130. ECOND FLOOR R2/15 R2/01 203a D2.05 D2.04 D2.03 X X06 Bin store as NB as NB ref ref N10/352 D R2/03 D2.01 soffits as NB ref Install noticeboards and hanging systems, as dwg no. as NB ref A09 D2.31 D2.30 X and and varnish NB ref R2/04 R2/18 D2.28 D2.29 X X05 Install reagent shelf to existing benching as dwg no. or afety station R2/07 or D2.27 Heavy duty glass storage racking as NB ref N10/ D2.26 window frames as NB ref M60/130. Fit new blinds as NB walls as NB ref 209b Gas bottle Analytical Laboratory rack R2/06 covers with proprietary covers as NB ref L20/630 window frames as NB ref M60/130. Fit new blinds as NB

5 eat Boxes and Display Area Works on hold in order to prioritise the teaching spaces. Targeted completion in November and and varnish NB ref X10 D3.11 Female Male X AV Room 308a tore 309 X02 Male D3.20 Female R3/09 Allow for undertaking damp repair works and and varnish NB ref D3.10 X11 X01 eating booths as dwg no. 143/154/303 D3.12 D3.09 D3.13 D3.14 and D tudio / Work Area D3.18 and D3.19 D3.21 A09 eating booths as dwg no. 143/154/303 R3/ R3/14.5 D3.35 Cleaner's tore A05 D b tore D3.17 D3.23 R3/08.5 D3. R3/08 Cleaner's tore layout as dwg no. system as NB ref 312 THIRD FLOOR 304 R3/15 D3.07 D3.08 and D3.06 system as NB ref 303 Meeting Room 302 R3/01 D3.05 D3.04 X07 X06 D as NB ref and D3.02 R3/03 Bin store as NB ref N10/352 D3.01 Install noticeboards and hanging systems, as dwg no. soffits as NB ref D3.34 and and and varnish NB ref R3/04 D3.33 as NB ref 315 Board Room D3.32 D3.31 X04 X05 and D3.27 D3.26 D3.28 D3.29 X15 D and 315 Completion - TBC. works in 315 have not commenced X16 D3.25 and 314 RA Allow for undertaking damp repair works X Meeting Room no. D3.30 R3/07 X03 window frames as NB ref M60/130. Fit new blinds as NB window frames as NB ref M60/130. Fit new blinds as NB

Living/ Dining Areas. Kitchen. Bedrooms. Bathroom

Living/ Dining Areas. Kitchen. Bedrooms. Bathroom Living/ Dining Areas alls loors Ceiling Lighting Additions alls loors Ceiling Cupboards Benchtop Mixer Tap ink Dishwasher Oven Cooktop Additions Bedrooms alls loors Ceiling ardrobes Lighting Additions