Logbook practical experience for initial application or additional (sub)-category of a Part-66 AML
|
|
- Shannon Roberts
- 5 years ago
- Views:
Transcription
1 Logbook practical experience for initial application or additional (sub)-category of a Part-66 AML This logbook is to be used to record details of experience over the practical period prior to the initial issue of a Part-66 Maintenance license (AML) and for additional categories or sub categories. Please indicate for which Category this Logbook is being used, by checking the appropriate box. 1. Details applicant A B1.1 B1.2 B1.3 B1.4 B2 B3 C Name :... Surname :... Nationality :. Address :... Postal Code : Place of residence :... Datum Pagina 1 van 34
2 2. Details Supervisor/CS Company Name: Address: Part 145 Approval reference: Supervisor name: AML License No* Company authorisation No: Signature: Supervisor name: AML License No* Company authorisation No: Signature: Supervisor name: AML License No* Company authorisation No: Signature: Company Name: Address: Part 145 Approval reference: Supervisor name: AML License No* Company authorisation No: Signature: Supervisor name: AML License No* Company authorisation No: Signature: Supervisor name: AML License No* Company authorisation No: Signature: * In case the Supervisor/CS is not in possession off a Dutch registered Part-66AML a copy of the foreign AML needs to be attached. Datum Pagina 2 van 34
3 3, Experience 3,1 Basic Experience Requirements overview Indicate in which period the basic experience is gained, ref Part 66.A.30(d) and AMC Part 66.A.30(d) Basic experience requirements. Start date End date Company Total Duration 3.2. Recent Experience: Indicate in which period the recent experience is gained, ref Part 66.A.30(d) and AMC Part 66.A.30(d) Basic experience requirements. Start date End date Company Total Duration Datum Pagina 3 van 34
4 Note: 1. for category A, subcategories B1.2 and B1.4 and category B3: 3 years of practical maintenance experience on operating aircraft, if the applicant has no previous relevant technical training; or 2 years of practical maintenance experience on operating aircraft and completion of training considered relevant by the competent authority as a skilled worker, in a technical trade; or 1 year of practical maintenance experience on operating aircraft and completion of a basic training course approved in accordance with Annex IV (Part-147); 2. for category B2 and subcategories B1.1 and B1.3: 5 years of practical maintenance experience on operating aircraft if the applicant has no previous relevant technical training; or 3 years of practical maintenance experience on operating aircraft and completion of training considered relevant by the competent authority as a skilled worker, in a technical trade; or 2 years of practical maintenance experience on operating aircraft and completion of a basic training course approved in accordance with Annex IV (Part-147); An applicant for an extension to an aircraft maintenance licence shall have a minimum civil aircraft maintenance experience requirement appropriate to the additional category or subcategory of licence applied for as defined in Appendix IV to this Annex (Part-66). 4. Details Quality Manager/Supervisor(s)/AML holder. By signing it, the Manager or supervisor(s)/aml holder will ensure that the technician has sufficiently satisfied the basic experience requirements (ref. Part 66.A.30 basic experience requirements). Name: Location: Company: : Signature: Datum Pagina 4 van 34
5 5. Instruction logbook basic experience. Pages six (6) to (34) of this logbook are based on Part 66 AMC appendix II Type practical Experience and On the Job Training. There is a maximum flexibility for adding tasks in this logbook. The contents of this logbook depends on your basic training (A, B1, B2 of B3). To demonstrate your experience, you ll need for each AML category a separate logbook. The category for which this logbook is being used you ll need to mention at page 1. In this logbook there are 2 blank pages, which makes it possible to add additional tasks. This Logbook consist out 9 columns. All the columns needs to be completely filled. In column 1: ATA chapter In column 2: Task title In column 3: Type In column 4: Registration In column 5: Operation/task performed, as detailed and clear as possible In column 6: Category, A, B1.1, B1.2, B1.3, B1.4, B2, or B3 In column 7: Signature/Name of the holder of this Logbook In column 8: Signature/Name of the supervisor In column 9:, when task is performed Example: ATA Task title 12 Servicing-Routine Maintenance Lubrication Fok-50 P2-TAG Lubrication of the Hinge Bearings of the Aileron Tab Ref: AMM B Datum Pagina 5 van 34
6 ATA Task title 05 Time limits/maintenance checks 06 Dimensions & Areas Datum Pagina 6 van 34
7 ATA Task title 07 Lifting and shoring 08 Levelling/Weighing Datum Pagina 7 van 34
8 ATA Task title 09 Towing and Taxiing 10 Parking and Mooring Datum Pagina 8 van 34
9 ATA Task title 11 Placards and Marking 12 Servicing-Routine Maintenance Datum Pagina 9 van 34
10 ATA Task title 18 Vibration and Noise analysis (helicopters) 20 Standard Practices- Airframe Datum Pagina 10 van 34
11 ATA Task title 21 Air Conditioning 22 Auto flight Datum Pagina 11 van 34
12 ATA Task title 23 Communications 24 Electrical Power Datum Pagina 12 van 34
13 ATA Task title 25 Equipment/Furnishing 26 Fire Protection Datum Pagina 13 van 34
14 ATA Task title 27 Flight controls 28 Fuel Datum Pagina 14 van 34
15 ATA Task title 29 Hydraulic Power 30 Ice and Rain protection Datum Pagina 15 van 34
16 ATA Task title 31 Indicating/Recording Systems 32 Landing Gear Datum Pagina 16 van 34
17 ATA Task title 33 Lights 34 Navigation Datum Pagina 17 van 34
18 ATA Task title 35 Oxygen 36 Pneumatic Systems Datum Pagina 18 van 34
19 ATA Task title 37 Vacuum Systems 38 Water/Waste Datum Pagina 19 van 34
20 ATA Task title 45 Central Maintenance System 51 Structures Datum Pagina 20 van 34
21 ATA Task title 52 Doors 56 Windows Datum Pagina 21 van 34
22 ATA Task title 57 Wings 60 Propeller Datum Pagina 22 van 34
23 ATA Task title 62 Main Rotors (helicopters) 63 Rotor Drive (helicopters) Datum Pagina 23 van 34
24 ATA Task title 64 Tail Rotors (helicopters) 65 Tail Rotor Drive (helicopters) Datum Pagina 24 van 34
25 ATA Task title 67 Rotor Flight Controls (helicopters) 70 Power plant Datum Pagina 25 van 34
26 ATA Task title 71 Piston Engines Power plant 71 Turbine Engines Power plant Datum Pagina 26 van 34
27 ATA Task title 73 Engine Fuel and Control (Piston) 73 Engine Fuel and Control (Turbine) Datum Pagina 27 van 34
28 ATA Task title 74 Ignition Systems (Piston) 74 Ignition Systems (Turbine) Datum Pagina 28 van 34
29 ATA Task title 76 Engine Controls 77 Engine Indication Datum Pagina 29 van 34
30 ATA Task title 78 Exhaust (Piston) 78 Exhaust (Turbine) Datum Pagina 30 van 34
31 ATA Task title 79 Oil 80 Starting Datum Pagina 31 van 34
32 ATA Task title 83 Accessory Gearbox 49 APU Datum Pagina 32 van 34
33 ATA Task title ALL Extra tasks Performed 23 Datum Pagina 33 van 34
34 ATA Task title ALL Extra tasks Performed Datum Pagina 34 van 34
INTRO, CONTENTS INTRODUCTION TABLE OF CONTENTS. Chapter Section Subject Subject Page
SD3-60 AIRCRAFT MAINTENANCE MANUAL z TABLE OF CONTENTS Chapter Section Subject Subject Page General 1 Companion Manuals 1 Content 1 Method of using the manual 1 List of Effective Pages 3 Revisions 3 Conventions
More informationCHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS F CH-62
CHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS 18068-3F CH-62 Updated: April 2015 SCOPE OF RATING GENERAL INFORMATION TABLE OF CONTENTS AVIATION MACHINIST'S MATE (AD) AVIATION MACHINIST S MATE ORGANIZATIONAL
More informationCHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS G CH-76
CHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS 18068-3G CH-76 SCOPE OF RATING GENERAL INFORMATION TABLE OF CONTENTS AVIATION MACHINIST'S MATE (AD) AVIATION MACHINIST S MATE ORGANIZATIONAL LEVEL AUXILIARY
More informationOfficial Journal of the European Union L 298/75
16.11.2011 Official Journal of the European Union L 298/75 A3 A4 B1.3 B1.4 Electronic library system; Printing; Structure monitoring (damage tolerance monitoring). 12.19 Information Systems (ATA46) 1 2
More informationGuidance for Fitting COTS Products to Airframes
Guidance for Fitting COTS Products to Airframes Determination for Major/Minor Alterations (FAA) 1. Who determines if an alteration to an aircraft is Major or Minor? The installer, backed by approved and
More informationModule 13 Aircraft Aerodynamics, Structures and Systems
13.1 Theory of Flight (a) Aeroplane Aerodynamics and Flight Controls Operation and effect of: roll control: ailerons and spoilers, pitch control: elevators, stabilators, variable incidence stabilisers
More informationHELISIM SIMULATION CREATE. SET. HOVER
SIMULATION HELISIM CREATE. SET. HOVER HeliSIM is the industry-leading high-end COTS for creating high-fidelity, high-quality flight dynamics simulations for virtually any rotary-wing aircraft in the world
More informationCHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS D CH-42
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS 18068-10D CH-42 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION AVIATION SUPPORT EQUIPMENT
More informationIndustrial Mechanic (Millwright) Level 4
Level 4 Rev. September 2005 Unit: A3 Pre-Interprovincial Review 50 hours Theory: Practical: 50 hours 0 hours This unit offers apprentices a systematic review of skills and knowledge required to pass the
More informationCHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS D CH-63
CHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS 18068-1D CH-63 Updated: July 2015 TABLE OF CONTENTS AVIATION BOATSWAIN'S MATE (AIRCRAFT HANDLING) (ABH) SCOPE OF RATING GENERAL INFORMATION AIRCRAFT DIRECTOR
More information1625 North 1100 West SB Springville, UT SERVICE BULLETIN MANDATORY ACTION REQUIRED
SERVICE BULLETIN MANDATORY ACTION REQUIRED Subject: Chafing of Aileron Cable Assembly P/N 7227151-522WE. 1. Planning a. Effectivity Part Number NHA P/N NHA Description ATA Aircraft Application 7227151-522WE
More informationGrades 9 to 12 Aviation and Aerospace Technologies. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Aviation and Aerospace Technologies Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 A v i a t i o n a n d A e r o s p a c e T e c h n o l o g i e s
More informationDepartment of Mechanical Engineering
UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0
More informationAIRCRAFT TECHNOLOGY PROGRAMME
AIRCRAFT TECHNOLOGY PROGRAMME 1 st SEMESTER BLT101 COMPUTER TECHNOLOGIES-I Examination of methods and techniques to access information and acquisition of skills to use them. Basic concepts of information
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2016-0018R1 Issued: 14 September 2016 EASA AD No.: 2016-0018R1 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008
More informationRIVERSIDE COUNTY OFFICE OF EDUCATION REGIONAL OCCUPATIONAL PROGRAM (ROP) INDIVIDUALIZED TRAINING PLAN (ITP)
COMMUNITY CLASSROOM (CC) 9/27/2017 3:22:00PM 1 of 5 1718 COOPERATIVE VOCATIONAL EDUCATION () Emergency Phone School of Residence District Title Teacher Teacher Phone Sites: Name Location Manager/Employer
More informationCHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS E CH-75
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS 18068-10E CH-75 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION AVIATION SUPPORT EQUIPMENT
More informationGPS System Design and Control Modeling. Chua Shyan Jin, Ronald. Assoc. Prof Gerard Leng. Aeronautical Engineering Group, NUS
GPS System Design and Control Modeling Chua Shyan Jin, Ronald Assoc. Prof Gerard Leng Aeronautical Engineering Group, NUS Abstract A GPS system for the autonomous navigation and surveillance of an airship
More informationParts Manual 1290 & 1390
J.I. Case Parts Manual 1290 & 1390 Parts Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF J.I. CASE OR IT S SUCCESSORS. J.I. CASE AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationTRAILER MOUNTED PUMP MODEL A30HP ILLUSTRATED PART MANUAL TABLE OF CONTENTS HOW TO USE PARTS MANUAL HOW TO ORDER PARTS TABLE OF CONTENTS
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 REED TRAILER MOUNTED CONCRETE PUMP MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE MANUAL FIGURE
More informationMS-357, Lockheed-Martin Aeronautical Patent Collection
Collection Number: MS-357 MS-357, Lockheed-Martin Aeronautical Patent Collection Title: Lockheed-Martin Aeronautical Patent Collection Dates: 1844-1988 Creator: Lockheed Martin Corporation Summary/Abstract:
More informationNMD Rev 1 2 August 1996 Page 1
FLIGHT CONTROLS - AILERON & FLAP CONTROL ROD FORK ENDS - INSPECTION 1. PLANNING INFORMATION A. Effectivity All Nomad N22 Series and N24 Series aircraft. B. Reason (1) Instances have occurred where Fork
More informationGuidance on the procedure for assessing ship's cooks
Translation. Only the Danish document has legal validity. Guidance no. 11061 of 25 November 2015 issued by the Danish Maritime Authority Guidance on the procedure for assessing ship's cooks 1. Purpose
More informationCSNC CARBIDE CIRCULAR SERIES
CSNC CARBIDE CIRCULAR SERIES HIGHLY EFFICIENT AND PRODUCTIVE HIGH SPEED CIRCULAR SAWING MACHINES CARBIDE SAWS DO THE WORK OF FIVE CONVENTIONAL FACTORY BAND SAWS, WITHOUT SACRIFICING QUALITY. GET THE CLOSE-CUT
More informationSERVICE BULLETIN. No. SB-CR-017 Rev.: - Date: Page: 1 of 7 Date: -
Page: 1 of 7 Date: - MODEL AFFECTED: SUBJECT: AIRCRAFT AFFECTED: COMPLIANCE: PS-28 Cruiser / SportCruiser / PiperSport Replacement of rivets for bolts in the area of the main landing gear attachment. All
More informationAC 60-25E 4/16/01 End of Appendix 1 and start of Appendix 2 at AC 65-9
End of Appendix 1 and start of at AC 65-9 O255 Flight Planning O256 Preflight Operations O257 The Standard Burn O258 Inflation O259 Launch O260 Level Flight O261 Ascents and Descents O262 Contour Flying
More informationNOTICE TO ALL PROSPECTIVE RESPONDENTS RFP 16-AHR/GP. Addendum No. 6 issued April 18, Request for Interpretation Responses
DEDICATED TO THE HEALTH OF OUR COMMUNITY www.hcdpbc.org NOTICE TO ALL PROSPECTIVE RESPONDENTS RFP 16-AHR/GP Addendum No. 6 issued April 18, 2016 Request for Interpretation Responses RFI 1: RFI 2: RFI 3:
More informationAircraft Layout From the master, Nathan Kirschbaum
at NAS Willow Grove mid 1940s Aircraft Layout From the master, Nathan Kirschbaum Helping students, mid 1990s at USAF Museum around 1990, showing students the Bomarc he worked on at Boeing in the early
More informationChapter 20. Standard Practices - Airframe
Chapter 20 Standard Practices - Airframe PAGE 1 Chapter 20 Table of Contents Chapter Title 20-00-00 GENERAL.................................. 3 20-10-00 STANDARD PRACTICES AIRFRAME........... 4 20-10-01
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-AT1-1 Apply basic math concepts: A. Add, subtract, multiply, and divide whole numbers. B. Measure to the nearest 1/1000 th. C. Add, subtract, and convert fractions
More informationAcquisition of HR Textron
TM Acquisition of HR Textron Investor Conference Call March 3, 2009 CONTROLLING the power of ENERGY Cautionary Statement Information in this presentation contains forward-looking statements within the
More informationIs Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration.
Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration. PARTS LIST B30L TURBO CONTENTS 1. MAIN BODY...1 ~ 2 2. GEARCASE...3
More informationA TIMKEN COMPANY SUBSIDIARY
A TIMKEN COMPANY SUBSIDIARY Timken design and manufacturing excellence yields comprehensive aerospace solutions. Timken is innovative. Timken is collaborative. Timken is responsive. innovative For more
More informationCockpit Voice Recorder Intelligibility Analysis Flight Test Procedures
Registration: Serial #: Model: Date: Important Note To Flight Crew The procedures detailed in this report are intended to demonstrate that the CVR records the required information. Failure to follow each
More informationRoot Cause Failure Analysis In Rotating Machinery
Root Cause Failure Analysis In Rotating Machinery -Causes & Avoidance- A must course to understand the process of machinery failures, help with the job and add value to the business Abu Dhabi 16 20 March
More informationMD RA Minister's Delegates - Recreational Aviation Représentants du Ministre - Aviation de loisir
Think Safety Inspection Service MD RA Minister's Delegates - Recreational Aviation Représentants du Ministre - Aviation de loisir Pensons Securite Service d'inspection MDRA C20 MANUAL of PROCEDURES for
More informationA i r c r a f t C o m p o n e n t s a n d F u n c t i o n s ( 1 1 A )
8 5 4 5 A i r c r a f t C o m p o n e n t s a n d F u n c t i o n s ( 1 1 A ) 30S/30E/30M An Aviation and Aerospace Technologies Course 8 5 4 5 : A i r c r a f t C o m p o n e n t s a n d F u n c t i
More informationCIRRUS AIRPLANE MAINTENANCE MANUAL
PROPELLER ASSEMBLY 1. DESCRIPTION The propeller assembly consists of a hollow aluminum hub which supports the propeller blades and also houses the pitch changing mechanism. Movement of propeller blades
More informationSafety MD RA Sécurité
Safety MD RA Sécurité Minister's Delegates - Recreational Aviation Inspection Service Représentants du Ministre - Aviation de loisir Service d'inspection MDRA C20 MANUAL of PROCEDURES for INSPECTION of
More informationOperators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series
Operators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series! WARNING! Inappropriate use of rock saw may cause serious injury or death. Operators must read this manual before use and
More informationRotordynamics Analysis Overview
Rotordynamics Analysis Overview Featuring Analysis Capability of RAPPID Prepared by Rotordynamics-Seal Research Website: www.rda.guru Email: rsr@rda.guru Rotordynamics Analysis, Rotordynamics Transfer
More informationPolicy guidance regarding authorisation for Earth Stations on Vessels (ESVs)
Policy guidance regarding authorisation for Earth Stations on Vessels (ESVs) Publication date: September 2010 Earth Station on Vessels Contents Section Page 1 Policy Guidance regarding authorisation of
More informationIssue, 5 October 2000
CLC(SG)819 Edition 05 REPORT ON CIVIL AIRCRAFT AND INCORPORATED EQUIPMENT COVERING THE TECHNICAL SPECIFICATIONS AND RELATED CONFORMITY ASSESSMENT PROCEDURES, REGIONAL OR INTERNATIONAL, IN RELATION TO ELECTROMAGNETIC
More informationSERVICE I IPL, Service Tools, Service Tools
SERVICE I0300046 IPL, Service Tools, 2003-01 Service Tools 1 1 Contents Service s A. Hands, general purpose B. Pressure testing s C. Ignition system D. Carburettor, fuel pump E. Starter device F. Clutch,
More informationRegistry Publication 62
Births, Deaths, Missing Persons Background The Civil Aviation (Births, Deaths and Missing Persons) Regulations 1948 1 place requirements on the pilot in command and owner of aircraft to report births deaths
More informationCHAPTER 30 ENGINEMAN (EN) NAVPERS F CH-70
CHAPTER 30 ENGINEMAN (EN) NAVPERS 18068-30F CH-70 Updated: April 2017 TABLE OF CONTENTS ENGINEMAN (EN) SCOPE OF RATING GENERAL INFORMATION DIESEL ENGINE SYSTEMS MANAGER ENGINEERING MANAGEMENT MECHANICAL
More information第 4 页. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron to the wing.
TopRCModel-USA.com TopRCModel-USA.com TopRCModel-USA.com Accessory list for the installation of aileron and flap. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron
More informationINDUSTRY PROCESS AND AUTOMATION SOLUTIONS
INDUSTRY PROCESS AND AUTOMATION SOLUTIONS F SUMMARY Chapter Description Chapter Description 1 General information..................................2 1.1 Symbols and units of measure........................2
More informationCORRECTION NOTICE SOUTH AFRICAN CIVIL AVIATION AUTHORITY CIVIL AVIATION ACT, 2009 (ACT NO. 13 OF 2009)
CORRECTION NOTICE SOUTH AFRICAN CIVIL AVIATION AUTHORITY CIVIL AVIATION ACT, 2009 (ACT NO. 13 OF 2009) The Director of Civil Aviation has, in terms of section 163(1) of the Civil Aviation Act, 2009 (Act
More informationSpektrum AirWare Change Log 2018-Jan-18
Version 1.21.07 Changes listed below are since 2017-July-11. For more info visit http://spektrumrc.cachefly.net/airwarechangelogs.html Special Notes In the Telemetry menu, some sensors may not be reported
More informationSERVICE LETTER SERIAL NUMBERS thru with Hydraulic Pump
TITLE HYDRAULIC POWER - ENGINE DRIVEN HYDRAULIC PUMP VERIFICATION EFFECTIVITY REASON MODEL 525B (CJ3) 525B (CJ3+) SERIAL NUMBERS -0001 thru -0415 with 9912062-8 Hydraulic Pump Installed -0451 thru -0485
More informationPRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC
PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC 2 3 MACHINES WITH GREAT DIMENSIONS AND MACHINING CAPACITY The VTC range has been designed to create new high standards of turning and machining
More informationFull name of the following officers (or equivalent in each case) Title Full Given Name(s) of officer Surname
Identification form Associations Zurich account / policy number (if known) This Form must be completed together with your Zurich application or request form and mailed to:, Locked Bag 994, North Sydney
More informationCLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
More informationGround Support Equipment Library of Past Stand Drawings
Ground Support Equipment Library of Past Stand Drawings Liftsafe Fall Protection Inc. Collection of Past Stand Drawings For Current Stand Drawings Please Refer to Their Appropriate Webpage Past Engine
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2018-0135 Issued: 26 June 2018 EASA AD No.: 2018-0135 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on behalf
More informationAmerican Champion Aircraft Corp. Rochester, WI Page 1 of 5
Service Letter: 444 Initial Revision Date: August 18, 2017 Title: American Champion Aircraft Corp. Rochester, WI 53167 Page 1 of 5 Installation of Aileron Hinge Reinforcement Models: 8KCAB serial numbers
More information1906 Santos Dumont 14 bis
Historic Wings 1:72 Metal Kit of the Copyright unknown 1906 Santos Dumont 14 bis History, Notes and Assembly Instructions History Alberto Santos Dumont (July 20, 1873 July 23, 1932) was an early pioneer
More informationMachinery Failure Analysis and Troubleshooting
Machinery Failure Analysis and Troubleshooting Contents Acknowledgments Preface xiii xv Chapter 1: The Failure Analysis and Troubleshooting System 1 Troubleshooting as an Extension of Failure Analysis
More informationInstruction manual. ALOUETTE 3 For 600 size
Instruction manual ALOUETTE 3 For 600 size Dear customer, Thank you for purchasing a Smartmodel fuselage All our team wishes you a lot of fun for building and good flights. For 600 size or 50 Nitro power
More informationINDUSTRIAL MECHANIC (MILLWRIGHT)
Interim Logbook Department of Advanced Education and Skills Apprenticeship and Trades Certification Division INDUSTRIAL MECHANIC (MILLWRIGHT) Note to Apprenticeship Applicants This form can only be used
More informationOPEN INVITATION TO TENDER AO/RES/ASAIN/BMS/018/12 Building Management System (BMS) - Delivery, Installation, & Supporting Services
European Centre for the Development of Vocational Training Thessaloniki, 23/10/2012 RS/PRO/DELE/2012/0852 OPEN INVITATION TO TENDER AO/RES/ASAIN/BMS/018/12 Building Management System (BMS) - Delivery,
More informationHARTZELL PROPELLER INC. SERVICE BULLETIN
1. Planning Information A. Effectivity Hartzell propeller models HC-B(3,4,5)( )(P,N)-( )( ) that were installed on an aircraft, or that have had B-3339 mounting bolts replaced, between January 30, 2001
More informationElectrical Procedure No E032. Procedure No: ELE 032
Procedure No: ELE 032 Procedure Title: Date of Procedure: Responsible Person(s) Safety Isolation of Low Voltage Networks and Systems for work to be carried out by third parties. i.e. Non University personnel.
More informationManual for Propeller Type H40F
Manual for Propeller Type H40F Propeller Type: Propeller Serial No.: Date of Sale: Seal and signature of Manufacturer: Index 1 List of Modifications... 3 2 Description... 4 3 Specification of Helix Propeller
More informationSeychelles Civil Aviation Authority SAFETY NOTICE. Coding and registration of Seychelles 406 Mhz Emergency Locator Transmitters (ELTs)
Seychelles Civil Aviation Authority Safety Notice SAFETY NOTICE Number: Issued: 25 April 2018 Coding and registration of Seychelles 406 Mhz Emergency Locator Transmitters (ELTs) This Safety Notice contains
More informationEVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice
EVEKTOR AEROTECHNIK a.s. tel.: +420 572 537 111 Letecka 1384 fax: +420 572 537 900 686 04 Kunovice email: marketing@evektor.cz Czech Republic http://www.evektor.cz EvektorAerotechnik a.s. 2005 0. GENERAL
More informationInstructions for Continued
+ LORD BULLETIN NO. SM-6553 BELL 206 Instructions for Continued Airworthiness INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR LORD P/N LORD206-310-004101 AND P/N LORD206-310-004103 INSTALLED ON BELL 206A,
More informationPULSELITE INSTALLATION MANUAL MODEL 1210 / A STC NO. SA4005NM STC NO. SA00701SE
INSTALLATION INSTRUCTIONS NO. PPRI-3000 Serial Number PRECISE FLIGHT, INC. 63120 POWELL BUTTE ROAD BEND, OR 97701 800-547-2558 PULSELITE INSTALLATION MANUAL MODEL 1210 / 2405-2A STC NO. SA4005NM STC NO.
More informationService Bulletin No: Ref No: 136 Modification No: INSPECTION ATA Chapter: 57
PILATUS AIRCRAFT LTD. STANS, SWITZERLAND Service Bulletin No: 57-015 Ref No: 136 Modification No: INSPECTION ATA Chapter: 57 WING - AILERON INSTALLATION INSPECTION OF THE AILERON OUTBOARD-BEARING SUPPORT
More informationTRAILER MOUNTED PUMP MODEL A30 ILLUSTRATED PART MANUAL
TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 REED TRAILER MOUNTED CONCRETE PUMP 03 MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE MANUAL
More informationAUT 107 Mechanical Systems I 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name
3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name Student s Signature Completion Date High School Teacher s Signature Recommended Grade High School COCC
More informationEngineering Technology and Science xxx
79 xxx The Faculty of has a mission to provide high-quality, hands-on technical education, enabling graduates to continually meet the engineering needs and challenges of United Arab Emirates and beyond.
More informationCurriculum for Motor vehicle mechanic, light-duty vehicles Vg3 / in-service training at a training establishment
Curriculum for Motor vehicle mechanic, light-duty vehicles Vg3 / in-service training at a training establishment Dette er en oversettelse av den fastsatte læreplanteksten. Læreplanen er fastsatt på Bokmål
More informationDrilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
More informationSERVICE BULLETIN TITLE EQUIPMENT/FURNISHINGS - SEAT CONTROL CABLE ROUTING IMPROVEMENT
TITLE EQUIPMENT/FURNISHINGS - SEAT CONTROL CABLE ROUTING IMPROVEMENT EFFECTIVITY REASON MODEL SERIAL NUMBERS 525B (CJ3) -0451 thru -0504 The equivalent of this service bulletin has been incorporated on
More informationOur clients success is our genuine concern
Our clients success is our genuine concern Overview M/S SEINEN is an associate company of Dawood Engineering. It was established in Year 2006, with an aim to provide customers with comprehensive engineering
More informationENGR 10 John Athanasiou Spring
ENGR 10 John Athanasiou Spring 2010 http://www.bls.gov/oco/ocos027.htm 1. What is an engineering discipline? 2. Why is it created? The need to create a product /service Engineering Disciplines 1. Aerospace
More informationCHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS D CH-63
CHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS 18068-1D CH-63 Updated: July 2015 TABLE OF CONTENTS AVIATION BOATSWAIN'S MATE (LAUNCHING AND RECOVERY EQUIPMENT) (ABE) SCOPE OF RATING GENERAL INFORMATION
More informationAIRWORTHINESS DIRECTIVE
EASA AIRWORTHINESS DIRECTIVE AD No.: 2013-0288 Date: 06 December 2013 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) No 216/2008 on behalf of the European
More informationPULSELITE INSTALLATION MANUAL MODEL 1210 / A STC NO. SA4005NM STC NO. SA00701SE
INSTALLATION INSTRUCTIONS NO. PPRI-3000 Serial Number PRECISE FLIGHT, INC. 63120 POWELL BUTTE ROAD BEND, OR 97701 800-547-2558 PULSELITE INSTALLATION MANUAL MODEL 1210 / 2405-2A STC NO. SA4005NM STC NO.
More informationb+m Training Maintenance
b+m Training Maintenance Welcome to the training center of b+m Operating the Robot // T1-T2-BR 4 Robots are our passion yours as well? Do you want to stay up-to-date with the latest technology and expand
More informationSERVICE BULLETIN TRANSMITTAL SHEET HC-SB De-ice - Wire Harness Replacement
TRANSMITTAL SHEET April 27, 2017 This page transmits a revision to Service Bulletin. Original Issue, dated Revision 1, dated Apr 27/17 Propeller assemblies that have previously complied with the terminating
More informationBRONX COMMUNITY COLLEGE DIVISION OF ACADEMIC AFFAIRS
BRONX COMMUNITY COLLEGE DIVISION OF ACADEMIC AFFAIRS AUTOMOTIVE TECHNOLOGY PROGRAM ASSESSMENT PLANNING TEMPLATE May 15, 2009 Department/Program Physics and Technology Automotive Technology Program Department
More informationISO INTERNATIONAL STANDARD. Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
INTERNATIONAL STANDARD ISO 6405-1 Second edition 2004-11-01 Earth-moving machinery s for operator controls and other displays Part 1: Common symbols Engins de terrassement es pour les commandes de l'opérateur
More informationhttp://www.bls.gov/oco/ocos217.htm Assemblers and Fabricators Nature of the Work Training, Other Qualifications, and Advancement Employment Job Outlook Projections Data Earnings OES Data Related Occupations
More informationReplacing worn out MS hinges
Replacing worn out MS hinges C. Zavatson, 4-3-2014, rev A For the hinging of ailerons, flaps, inboard gear doors and the elevators of the small tail, Lancair utilized MS20001 hinge material. Unfortunately
More informationF3A -70E ASSEMBLY MANUAL
F3A -70E ASSEMBLY MANUAL The new F3A-70E, was designed in an extremely lightweight structure, the all wood airframe, and the new revolutionary Lift Generator on landing gear give the F3A-70E an impressive
More informationTable of contents: 1. Company 2. Mission and Vision 3. Technologies 4. Businesses 5. Customers 6. Team 7. Future 8. Cooperating with Fiudi
Company Profile Table of contents: 1. Company 2. Mission and Vision 3. Technologies 4. Businesses 5. Customers 6. Team 7. Future 8. Cooperating with Fiudi Our Company Our story starts in 1959 when Mauro
More informationD300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION
More informationMedium Engine Room Simulator - MER3D
Medium Engine Room Simulator - MER3D PC-based Engine Room Simulator MER3D Engine Room Simulator is based on the Bergen diesel (Rolls Royce) C25:33 engines, typical of the Workboat industry and of medium-sized
More informationOCCUPATIONAL STANDARD Conventional machine tool operator, level 3
OCCUPATIONAL STANDARD Conventional machine tool operator, level 3 The occupational standard is a document that describes the job and competence requirements, i.e. a set of skills, knowledge and attitudes
More informationOrbital Milling. A Buyers Guide.
A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime and improving
More informationDon t place any stamps or stickers on the form, (e.g. those featuring addresses). Don t write over the edges of the boxes.
Version 1.0 1 Our Application Processing department are responsible for carrying out quality assurance checks on all application forms received. Unnecessary delays to processing applications are caused
More informationSeries 4310 A Partnership for Success Series Battioni P agani Battioni Pagani Series Pompe natv ac.c om
Vacuum Pumps & Blowers 4310 Blower A Partnership for Success Commercial duty Battioni Pagani Battioni Pagani Pompe Vacuum pumps & Blowers Vacuum / Pressure Pumps MEC 2000-4000 607 - National Vacuum Equipment
More informationICAS Performer Emergency Extraction Information Smoky Mountain Air Show April 15th - 17th, 2016
ICAS Performer Emergency Extraction Information Smoky Mountain Air Show April 15th - 17th, 2016 Performer Name AeroShell Aerobatic Team Jacquie B Airshows The Alabama Boys by Greg Koontz Airshows Younkin
More informationAPPENDICES 1 to 12 to draft Commission Regulation (EU) No / on the licensing and medical certification of air traffic controllers
APPENDICES 1 to 12 to draft Commission Regulation (EU) No / on the licensing and medical certification of air traffic controllers (Part ATCO, Part ATCO.AR & Part ATCO.OR) Page 1 of 110 APPENDIX 1 FORMAT
More informationTF Model Jet Ranger 700
TF Model Jet Ranger 700 Assembly Instructions for Jet ranger 700 For Trex 600 E mechanic Thank you for purchasing TF Model's 700 Jet Ranger. Please read through this assembly manual carefully before proceeding
More information2. Install two guide studs, J 36107, to the gear case. See Figure
SERIES 60 SERVICE MANUAL 2. Install two guide studs, J 36107, to the gear case. See Figure 1-174. 1. Front Gear Case Cover 4. Locating Dowel (Round) 2. Front Engine Lift Bracket 5. Locating Dowel (Diamond)
More informationBearing fault detection of wind turbine using vibration and SPM
Bearing fault detection of wind turbine using vibration and SPM Ruifeng Yang 1, Jianshe Kang 2 Mechanical Engineering College, Shijiazhuang, China 1 Corresponding author E-mail: 1 rfyangphm@163.com, 2
More information