EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice

Size: px
Start display at page:

Download "EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice"

Transcription

1 EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice Czech Republic

2 EVEKTOR - AEROTECHNIK a.s. 2011

3 0. General This Spare Parts Catalogue serves to allow order some selected spare parts from the aircraft manufacturer. For parts order use Spare Parts Order form enclosed in this catalogue or in Appendices of the Aircraft Maintenance and Inspection Procedures (Maintenance Manual). State part description, order No., required quantity and other information required in this form. If you require other parts then is mentioned in this catalogue, do not hesitate contact us. Aircraft manufacturer: EVEKTOR AEROTECHNIK a.s. Letecka Kunovice CZECH REPUBLIC tel.: fax:

4 0.1 Table of contents 0. General Table of contents Overview Pictures Instructions for spare parts catalogue Aircraft assembly FUSELAGE Tilting canopy Canopy lock Rear part of fuselage Engine bed Engine cowlings Fuselage-central section Fuselage-central section, skins, parts Fuselage-central section, parts Fuselage-central section, parts Fuselage-central section, parts Landing gear beam Fuselage-rear section Fuselage-rear section, skins, parts Fuselage-rear section, parts Fuselage-rear section, parts WING Wing Wing mounting Wing modification-a715 Landing light Wet wing LH+RH Wings, flaps Wing airframe, wing skins Fuel tank, fuel caps TAIL UNITS Tail units Stabilizer Elevator CONTROLS Controls LANDING GEAR Nose landing gear Main landing gear Tyre / tube Wheel pants Main wheel cover attachment Brake system (four pumps system)

5 5.5.1 Brake pump (E ) Double brake pump (E /02) Brake cylinder Brake system Rudder and flaps control Pedal assy LH (E ), pedal assy RH (E ) Parking brake POWER UNIT Exhaust system Auxiliary fuel pump installation Water cooling Oil installation R 912S Heating + both sides windshield air blowing INSTALLATIONS Electrical system Electric trim tab control Stall warning system Digiflight IIVS Trutrak Auto Pilot Cockpit lighting for Koger sunshade Fuel instalation - integral tanks COCKPIT EQUIPMENT Cockpit equipment Koger sunshade OPTIONAL EQUIPMENT Ground equipment Spare connecting parts S S Instrument board shelter for NVFR Index Spare parts order

6 0.2 Overview The Spare Parts Catalogue lists items of spare parts composing Evektor SportStar Plus and Evektor Sportstar SL plane. Items forming the plane are grouped into section composed of groups (Fuselage, Wing,...) formed by one or more sheets. 0.3 Pictures The group name and drawing number are showed at the top: 1. Group name 1.1 Drawing number and name Parts without item number are shown for better orientation only. Suffix PLUS (+) and SL (S) at the end of picture's number and suffix P (+) and S at the end of position's number means validity for Evektor Sportstar Plus and SL type of plane. 0.4 Instructions for spare parts catalogue For repairs use original spare parts Evektor only. To prevent unnecessary misunderstandings and time losses following data in spare parts orders are to be quoted. 1. Exact address of the ordering party, post office together with the postal code and railway station eventually. 2. Exact order number and spare part name. 3. Spare parts quantity required. 4. Serial number of the plane and the engine. 5. Way of dispatch. 0.5 Aircraft assembly 1 FUSELAGE 2 WING 3 TAIL UNITS 4 CONTROLS 5 LANDING GEAR 6 POWER UNIT 7 INSTALLATIONS 8 COCKPIT EQUIPMENT 9 OPTIONAL EQUIPMENT 6

7 Intentionally left blank 7

8 FUSELAGE Tilting canopy 1.1PLUS 8

9 FUSELAGE Tilting canopy 1.1PLUS Pos. Order number Designation Qty. Standard Note Clear venting window LH Clear venting window RH Smoked venting window LH Smoked venting window RH Flap for venting window LH Flap for venting window RH Gas strut Bansbach 2 V0B

10 FUSELAGE Canopy lock 1.2PLUS 10

11 FUSELAGE Canopy lock 1.2PLUS Pos. Order number Designation Qty. Standard Note 001 E Wide tilting canopy E Fixed canopy Ball journal Ball journal bracket E Guiding pin E Guide E Upper pin welded E Spring E Lock handle E Ring E Assembled handle E Canopy lock ass E Lock handle E Upper pin E Plate E Canopy glass wide tinted E Side fuselage cover L E Side fuselage cover R Adjustable rod eye with swivel 2 SM Screw M 6x23 2 ONL Self locking nut M6 2 DIN V Nut M 5 6 DIN 980 V Washer DIN A2F Washer DIN Gas strut Bansbach 2 V0B Screw M 4x10 4 DIN A2F Rivet 6x6 2 DIN Pin 3m6x16 1 EN ISO Screw M 3x16 2 CSN S1 rubber - oil proof Washer CSN Washer DIN 125 A Washer 8x Plate 2x400x400 2 TEFLON Cement EMFIMASTIC PU 50 grey 310 ml Adhesive LOCTITE Glue Loctite E Front edge 1 11

12 FUSELAGE Canopy lock 1.2PLUS Pos. Order number Designation Qty. Standard Note Cover Rivet 3.2x AVEX Blind rivet 3.2x9.5 2 AVEX Blind rivet 3.2x AVEX Rivet 3.2x6.4 1 BE

13 13

14 FUSELAGE Canopy lock 1.2SL 14

15 FUSELAGE Canopy lock Pos. Order number Designation Qty. Standard Note 001 S Brown canopy S Lock set S Nut S Lock sheet S Spacer S Hinge nut S Fork S Lock pin S Holder pin S Lock lever Rack E Bolt modified Lamella lock FAB 1370/ Gas strut Bent plug handle Bolt M 6x20 4 ISO Screw M 4x16 3 DIN Bolt M 5x30 2 ISO S Guiding pin sheet L S Guiding pin sheet R Nut M 8 3 DIN 980 V Nut M 6 6 DIN Nut M 6 2 ISO Nut M 4 3 OST Washer DIN A2F Washer DIN 125 A Washer 6x1.5 4 ONL Ring 5 2 CSN Adjustable rod eye with swivel 2 SM Blind rivet 3.2x AVEX Rivet 3.2x7.9 4 AVEX SL 15

16 FUSELAGE Rear part of fuselage

17 FUSELAGE Rear part of fuselage Pos. Order number Designation Qty. Standard Note 001 E Tail skid E Spur E Spur support E L-Shaped extrusion S Spur coupling S Anchoring eye Blind rivet 3.2x9.5 8 AVEX Nut M 5 2 ONL Nut M 5 1 ONL Washer DIN Rivet 3.2x AVEX Screw M 5x20 3 CSN

18 FUSELAGE Engine bed

19 FUSELAGE Engine bed Pos. Order number Designation Qty. Standard Note 001 E Engine bed Silentblock retainer Silentblock spacing tube Silentblock Washer E Washer E Bracket E Bolt SG Plug E Bolt Washer CSN Cotter pin 4 CSN Rivet 3.2x7.9 8 AVEX

20 FUSELAGE Engine cowlings 1.5PLUS 20

21 FUSELAGE Engine cowlings 1.5PLUS Pos. Order number Designation Qty. Standard Note 010 E Upper cowling 1 010A E Upper cowling kevlar E Lower cowling with cut-out for the radiator 011A E Lower cowling with cut-out for the radiator kevlar B XXXXX Lower cowling with landing lights Camlock Screw M 4x12 10 ECO-FIX Nut M 4 10 ONL Mat Mikra 400x Leatherete black vinytol 2100x Washer DIN Blind rivet 3.2x AVEX

22 FUSELAGE Engine cowlings 1.5SL 22

23 FUSELAGE Engine cowlings Pos. Order number Designation Qty. Standard Note 001 S Upper engine cover S Lower engine cover assy Mounting doors LDN Frame LDN Camlock Screw M 4x12 10 ECO-FIX Nut M 4 10 OST Mat Mikra 400x Leatherete black vinytol 2100x Washer DIN Rivet 3.2x AVEX Blind rivet 3.2x AVEX Blind rivet 4.0x9.5 2 AVEX SL 23

24 FUSELAGE Fuselage-central section 1.6PLUS 24

25 FUSELAGE Fuselage-central section 1.6PLUS Pos. Order number Designation Qty. Standard Note 026 E Front upper cover Instrument panel frame Screw M 4x12 10 ECO-FIX Screw M 4x12 6 ISO Screw M 5x35 4 ISO Screw M 5x20 2 ISO Nut M 4 83 ONL Nut M 4 18 ONL Nut M 6 2 ONL Nut M 5 4 DIN 980 V Nut M 5 6 ONL Nut M 5 4 ONL Nut M Washer DIN Washer DIN Rivet 2.4x8 42 NAS1097 AD Rivet 2.4x NAS1097 AD Rivet 2.4x NAS1097 AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x NAS1097 AD Rivet 3.2x MS20470AD Rivet 3.2x AVEX Rivet 3.2x MS20470AD Blind rivet 3.2x AVEX Blind rivet 3.2x AVEX Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Blind rivet 4.0x AVEX Rivet 4.0x NAS1097 AD Blind rivet 4.0x AVEX

26 FUSELAGE Fuselage-central section 1.6SL 26

27 FUSELAGE Fuselage-central section Pos. Order number Designation Qty. Standard Note 001 S Fixed frame S Upper front sheet S Rear glass - brown Nut M Gland Bushing 8x1 2 CSN (0.80m) Hose Tubclair Screw M 4x12 6 ECO-FIX Screw M 4x12 6 ISO Nut M 4 81 OST Nut M 4 20 ONL Nut M 6 2 ONL Nut M 5 6 ONL Nut M 5 8 ONL Washer DIN Rivet 2.4x8 42 NAS1097 AD Rivet 2.4x NAS1097 AD Rivet 2.4x NAS1097 AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x NAS1097 AD Rivet 3.2x MS20470AD Rivet 3.2x AVEX Rivet 3.2x MS20470AD Blind rivet 3.2x AVEX Blind rivet 3.2x AVEX Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Blind rivet 4.0x AVEX Rivet 4.0x NAS1097 AD Blind rivet 4.0x AVEX Rivet 4x BN Rivet 3.2x BE Rivet 3.2x9.5 6 AVEX SL 27

28 FUSELAGE Fuselage-central section, skins, parts 1.6.1PLUS 28

29 FUSELAGE Fuselage-central section, skins, parts 1.6.1PLUS Pos. Order number Designation Qty. Standard Note 002 S Skew bulkhead S Fire bulkhead Spar hinge L Spar hinge R E Stiffener E Stiffener E Stiffener Rib L Rib R Skin L Skin R E Stiffener E Stiffener S Stiffener L S Stiffener R E Longeron E Longeron E Stiffener E Stiffener SG Crossbeam SG Crossbeam SG Left side skin S Right side skin SG Lower skin E Inclined stiffener E Inclined stiffener E Rear spacer E Rear spacer E Front stiffener E Front stiffener 1 29

30 FUSELAGE Fuselage-central section, skins, parts 1.6.1SL 30

31 FUSELAGE Fuselage-central section, skins, parts Pos. Order number Designation Qty. Standard Note 006 S Fire wall E Stiffener E Stiffener E Stiffener Rib L Rib R Skin L Skin R E Stiffener E Stiffener S Stiffener L S Stiffener R S Stringer L S Stringer R E Stiffener E Stiffener SG Crossbeam SG Crossbeam SG Left side skin S Right side skin SG Lower skin E Inclined stiffener E Inclined stiffener E Rear spacer E Rear spacer E Front stiffener E Front stiffener S Lower diaphgram S Horizontal frame S Upper diaphgram S Reinforcement L S Reinforcement R S Belt pin E Stiffener E Stiffener S Stay SL 31

32 FUSELAGE Fuselage-central section, parts

33 FUSELAGE Fuselage-central section, parts Pos. Order number Designation Qty. Standard Note 001 S Centre section S Landing gear beam E Battery holder S Cover assy E Bowden holder Left joint Right joint S Seat crosspiece Spar under tank Instrument board spar SG Stop E Cover E Cover E Short stiffener E Short stiffener E Stiffener E Stiffener SG Seat SG Seat SG Upper strap E Fitting 2 160P SG Stiffener E Spar S Profile Rubber S Front bottom S LH rib S RH rib

34 FUSELAGE Fuselage-central section, parts

35 FUSELAGE Fuselage-central section, parts Pos. Order number Designation Qty. Standard Note 011P SG Completed bush 1 011S S Bush assy 1 012P SG Completed bush 1 012S S Bush assy S Completed bush S Completed bush E Reinforcing bracket L E Reinforcing bracket R 1 028P E Bridging 1 042P Box-angle plate L Joint SG Joint E Support L E Support R E Support stiffener SG Stiffener SG Stiffener E Bracket 2 073S E Bridging E Corner bracing L E Corner bracing R SG Short spar SG Short spar SG Insert SG Insert SG Reinforcment E Desk 2 125P E Central washer 2 125S E Outer washer E Side coupling 2 137P E Crossbeam E Reinforcment exterior E Reinforcment exterior Ground point complete S Connecting piece S LH angle S RH angle S LH angle S RH angle

36 FUSELAGE Fuselage-central section, parts Pos. Order number Designation Qty. Standard Note 309 S LH angle S RH angle S Angle S Backrest

37 37

38 FUSELAGE Fuselage-central section, parts

39 FUSELAGE Fuselage-central section, parts Pos. Order number Designation Qty. Standard Note Rib L Rib R SG Stiffener SG Frame E Lower spar E Lower spar SG Front stiffener

40 FUSELAGE Landing gear beam

41 FUSELAGE Landing gear beam Pos. Order number Designation Qty. Standard Note 001 S Spar S Spar SG Long spacer SG Leg strut SG Leg strut SG Front rack SG Front rack SG Front crossbeam SG Front crossbeam SG Large spacer SG Large spacer E Longeron SG Spacer SG Support SG Rack SG Triangle SG Shim S Rear rack S Rear rack E Strip SG Coupling SG Bush S Coupling SG Rear profile SG Rear profile S Spar S Spar SG Profile SG Profile SG Support SG Support SG Bracket SG Bracket E Clutch SG Bracket SG Spar profile SG Shim Nut M 8 2 ONL Rivet 3.2x MS20470AD

42 FUSELAGE Landing gear beam Pos. Order number Designation Qty. Standard Note Rivet 3.2x AVEX Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x NAS1097 AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 3.2x9.5 4 NAS1097 AD Rivet 4.0x9.5 3 MS20470AD Rivet 3.2x MS20470AD Blind rivet 3.2x AVEX Blind rivet 3.2x9.5 4 AVEX

43 43

44 FUSELAGE Fuselage-rear section

45 FUSELAGE Fuselage-rear section Pos. Order number Designation Qty. Standard Note Nut M Screw M 4x16 4 ECO-FIX Washer DIN Blind rivet 3.2x9.5 8 AVEX Rivet 3.5x10 7 CSN P 6472 Rivet 3.2x AVEX S 6472 Rivet 3.2x AVEX Rivet 2.4x6.4 4 NAS1097 AD Rivet 4.0x NAS1097 AD Rivet 3.2x7.9 8 MS20470AD Blind rivet 4.0x9.5 6 AVEX

46 FUSELAGE Fuselage-rear section, skins, parts 1.7.1PLUS 46

47 FUSELAGE Fuselage-rear section, skins, parts 1.7.1PLUS Pos. Order number Designation Qty. Standard Note 003 E Tail unit fillet E Fuselage rear part tip E Rear fin skin E Fin front skin E Cap assembly SG Fuselage left skin SG Fuselage right skin E Fuselage rear part upper skin E Fin tip EZA E Fin tip Whelen A450 strobe light 1 47

48 FUSELAGE Fuselage-rear section, skins, parts 1.7.1SL 48

49 FUSELAGE Fuselage-rear section, skins, parts Pos. Order number Designation Qty. Standard Note 003 S Rear fairing E Fuselage rear part tip S Upper sheet L S Upper sheet R E Rear fin skin E Fin front skin E Cap assembly SG Fuselage left skin SG Fuselage right skin S Fin tip arch - beacon S Fin tip arch E Beacon light SL 49

50 FUSELAGE Fuselage-rear section, parts

51 FUSELAGE Fuselage-rear section, parts Pos. Order number Designation Qty. Standard Note 010 SG Rear beam SG Rear flange SG Rear flange 1 017P SG Fin stiffener 2 017S S Fin reinforcement SG Main strap SG Main strap SG Longeron SG Bulkhead SG Coupling SG Inclined stiffener - left SG Inclined stiffener - right SG Diagonal stiffener SG Diagonal stiffener E Diagonal stiffener E Diagonal stiffener SG Spacer SG Spacer SG Spacer SG Lower right stiffener SG Lower left stiffener SG Bottom stiffener SG Bottom stiffener SG Bottom stiffener SG Stiffener S Corner stiffener S Corner stiffener SG Reinforcing profile 1 073P E Stiffener SG Strut SG Strut

52 FUSELAGE Fuselage-rear section, parts

53 FUSELAGE Fuselage-rear section, parts Pos. Order number Designation Qty. Standard Note 001 SG Completed pin SG Completed pin SG End wall SG Stabilizer rear hinge SG Insert SG Insert E Lower hinge E Bearing housing E Stiffener E Under rib E Upper rib SG Shim SG Stiffener E Stiffener E Stiffener P E Cover coupling 1 030S S Cover connection E Stabilizer front hinge E Pin E Cable duct SG Stiffener E External stiffener SG Antenna rib-assy E Bracket E Bracket Bearing SM6 1 CSN P 3057 Nut M 8 1 CSN S Nut M 8 1 ISO Washer ONL Nut M 8 1 DIN 980 V Lug 8x14x6 1 ONL (0.10m) Tube 8x P (0.22m) Edge protection

54 WING Wing

55 WING Wing Pos. Order number Designation Qty. Standard Note 001 S Wing tip LH S Wing tip RH S Wing tip for position light LH S Wing tip for position light RH S Bleeding tube (2.50m) Hose for engine fuels FUB Clip Cobra 11/ One-way check valve CK250E-B Rivet 3.2x AVEX for one wingtip

56 WING Wings mounting

57 WING Wings mounting Pos. Order number Designation Qty. Standard Note 001 SG Pin S Spacer Washer 16x2 4 ONL Bolt M 8x23 2 ONL Washer DIN 125 A Nut M 8 2 CSN E Fletner Safety pin ONL Terminal Nicopress Silon Blind rivet 3.0x6.7 3 AVEX

58 WING Wing modification-a715 Landing light

59 WING Wing modification-a715 Landing light Pos. Order number Designation Qty. Standard Note 001 E Landing light cover E Holder L E Lower holder L E Rear profile E Front profile 1 006P E Upper stiffener L 1 006S S Upper stiffener L 1 007P E Lower stiffener L 1 007S S Lower stiffener L E Large cover 1 009P E Small cover 1 009S S Small cover E Bracket E Spacer Screw M 4x12 22 ECO-FIX Nut M 4 14 ONL Nut M 4 8 ONL Screw M 6x45 2 ISO Washer DIN A2F Washer DIN Nut M 6 2 ISO Washer DIN Lamp for whelen 1 A715 G4509-PAR Headlight Rivet 3x6 11 CSN Rivet 3x7 4 CSN Rivet 2.4x NAS1097 AD Rivet 3.2x7.9 6 AVEX

60 WING Wet wing LH+RH

61 WING Wet wing LH+RH Pos. Order number Designation Qty. Standard Note 002 S Wing with fuel tank L S Wing with fuel tank R E Fillet sheet L E Fillet sheet R E Upper fillet L E Upper fillet R Rivet 3.2x AVEX Blind rivet 3.2x AVEX Blind rivet 4.0x AVEX Rivet 3.2x7.9 7 MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 3.2x MS20470AD Rivet 4.0x9.5 1 MS20470AD Rivet 4.0x MS20470AD Rivet 4.0x MS20470AD Rivet 2.4x NAS1097 AD Rivet 3.2x6.4 1 NAS1097 AD Blind rivet 3.2x AVEX Blind rivet 3.2x AVEX Blind rivet 3.2x8 137 AVEX Blind rivet 3.2x AVEX Blind rivet 4.0x11 36 AVEX Rivet 4x13 18 MFX Rivet 4x16 3 MFX Blind rivet 4.0x AVEX Blind rivet 4x8 5 AVEX Rivet 3.2x9.5 8 MS20470AD Rivet 3.2x MS20470AD Rivet 2.4x11 21 NAS1097 AD Blind rivet 4.0x BN Rivet 4x10 9 CSN Rivet 4x9 3 CSN Blind rivet 3.0x AVEX

62 WING Wings, flaps

63 WING Wings, flaps Pos. Order number Designation Qty. Standard Note 002L S LH Aileron 1 002R S RH Aileron 1 003L S Flap - L 1 003R S Flap - R 1 011L Rib L 7 011R Rib R 7 039L S Stiffener L 1 039R S Stiffener R 1 040L Stiffener 1 040R Stiffener

64 WING Wing airframe, wing skins

65 WING Wing airframe, wing skins Pos. Order number Designation Qty. Standard Note 001L S Left wing frame 1 001R S Right wing frame SG Step skin S Inner leading skin S Wing tip nose skin 2 015L S Upper central skin L 1 015R S Upper central skin R 1 016L S Upper outer skin L 1 016R S Upper outer skin R 1 017L S Lower inner skin L 1 017R S Lower inner skin R 1 018L S Lower outer skin L 1 018R S Lower outer skin R SG Flap upper cover sheet 2 029L S Connecting angle 1L 1 029R S Connecting angle 1R S Leading middle skin SG Stiffener SG Stiffener SG Shim S Rear suspension 2 047L SG Shim L 1 047R SG Shim R Coupling L SG Shim L 1 052R SG Shim R S Inner skin S Washer SG Skin stiffener S Step skin rib L S Step skin rib R S Connecting angle L S Connecting angle R S Stiffening rib L S Stiffening rib R S Connecting angle L S Connecting angle R 4 258L S Parting wall L 1 258R S Parting wall R

66 WING Wing airframe, wing skins Pos. Order number Designation Qty. Standard Note 259 S Rear suspension S Rear suspension

67 67

68 WING Fuel tank, fuel caps

69 WING Fuel tank, fuel caps Pos. Order number Designation Qty. Standard Note Cap S Reservoir lid 2 081A E Pitot tube brachet B SG Pitot tube brachet Screw M 4x12 13 ECO-FIX Washer DIN Drain valve Clip Cobra 11/ (0.05m) Oil hose 1 ISO Clip Cobra 12/ Fuel tank lid 2 201A Pitot tube B Pitot tube B Pitot tube with heating

70 TAIL UNITS Tail units

71 TAIL UNITS Tail units Pos. Order number Designation Qty. Standard Note 001 S Stabilizer assembled 002 S Elevator assembled 003P E Rudder 003S S Rudder 101 SG Bush SG Bush Nut M 5 1 ONL Nut M 8 2 CSN Nut M Screw M 4x16 22 ECO-FIX Washer DIN 125 A Washer DIN Split pin 1x12 1 CSN Split pin 2x20 2 CSN Rivet 3.2x9.5 6 NAS1097 AD

72 TAIL UNITS Stabilizer

73 TAIL UNITS Stabilizer Pos. Order number Designation Qty. Standard Note 001 E Stabilizer tip SG Spar E Auxiliary spar E Auxiliary spar SG Upper strap SG Lower strap SG Stiffener E Rib E Root rib SG Small strap E Skin SG Fitting SG Support SG Bush E Stiffening angle E Stiffening angle SG Support Rivet 3.2x AVEX Blind rivet 3.2x AVEX Rivet 3.2x MS20470AD Rivet 3.2x9.5 4 MS20470AD Rivet 3.2x NAS1097 AD Rivet 3.2x9.5 4 NAS1097 AD

74 TAIL UNITS Elevator 3.1.2PLUS 74

75 TAIL UNITS Elevator 3.1.2PLUS Pos. Order number Designation Qty. Standard Note 001 E Elevator tip E Elevator tip E Rib E Rib E Root rib E Root rib E Trim tab tip E Pad E Trim tab skin S Strip E Lever E Single arm lever E Single arm lever E Bush E Bowden holder E Elevator skin E Coupling E Coupling SG Outer hinge SG Inner hinge Hinge Rod 3 2 DIN Screw M 6.5x25 2 ONA Nut M 6 4 CSN Washer DIN A2F Bush 8x4 1 CSN Rivet 3.2x AVEX Rivet 3x7 12 CSN Rivet 3.5x11 3 CSN Rivet 3x8 4 CSN Blind rivet 3.0x AVEX

76 TAIL UNITS Elevator 3.1.2SL 76

77 TAIL UNITS Elevator Pos. Order number Designation Qty. Standard Note 001 E Elevator tip E Elevator tip E Rib E Rib E Root rib E Root rib E Trim tab tip E Trim tab skin S Strip E Lever E Bush E Elevator skin E Coupling E Coupling SG Outer hinge SG Inner hinge Hinge Rod 3 2 DIN Bush 8x4 2 CSN E Rubber border E Elevator reinforcement E Cover Screw M 3x10 4 DIN Nut M 3 4 ONL Rivet 3.2x AVEX Rivet 3x7 12 CSN Blind rivet 3.2x9.5 8 AVEX Blind rivet 4.0x9.5 4 AVEX Blind rivet 3.0x AVEX SL 77

78 CONTROLS Controls

79 CONTROLS Controls Pos. Order number Designation Qty. Standard Note 001 SG Control lever body SG Completed control lever S Control levers connecting rod S Rod S Rod S Rod SG Completed control lever S Rod 16 short SG Control rod holder S Rod S Rod SG Tube SG Bearing S Clearance ring SG Aileron two-armed lever S Bolt modified Screw M 6x25 2 ONL Screw M 6x63 2 ONL Screw M 6x23 10 ONL Screw M 6x49 2 ONL Screw M 6x27 2 ONL Screw M 5x70 4 DIN Nut M 6 18 CSN Washer 6x1 43 ONL Cotter pin 1.6x14 18 CSN Bicycle rubber grip Washer CSN S Lock washer Nut M 6 4 CSN S Aileron two-armed lever Blind rivet 4.0x AVEX

80 LANDING GEAR Nose landing gear

81 LANDING GEAR Nose landing gear Pos. Order number Designation Qty. Standard Note 001P S Nose landing gear 1 001S S Nose landing gear S Spacer S Small spacer S Stop 2 005P E Rod S S Rod 12 - L SG Wheel axe SG Bolt Washer 2 009P E Nose wheel - assy 1 010S S Nose wheel assy 15x E Tube E Tube S Eye L S Eye R 1 015P E Rod S S Rod 12 - P S Rubber washer S Strip S Strip S Nose landing gear sleeve 1 020P E Backstop modified 1 020S S Stop modified S Rubber rope Hose clip Screw M 6x12 2 BN Screw M 6x23 2 ONL P 3069 Nut M6 4 CSN S 3070 Nut M 6 4 CSN P Cable tie 3.6x142 4 PLT1.5I-C 029S Cable tie 3.6x142 2 PLT1.5I-C Fastener band 4.8x HN Washer 6 6 CSN P 3115 Washer CSN S 6813 Washer DIN A2F Cotter pin 1.6x14 4 CSN Cotter pin 2.5x25 2 CSN Ring lock 10 2 CSN

82 LANDING GEAR Nose landing gear Pos. Order number Designation Qty. Standard Note 041P 1991 Wire KR CSN Molyka paste 045S S Silentblock 1 046S S Centering washer Glue Loctite

83 83

84 LANDING GEAR Main landing gear

85 LANDING GEAR Main landing gear Pos. Order number Designation Qty. Standard Note 001P E Left wheel with brake 1 001S S Wheel with brake L 1 002P E Right wheel with brake 1 002S S Wheel with brake R E Nut Washer 2 005LP S Leg left - assembly 1 005LS S Leg completed L 1 006RP S Leg right - assembly 1 006RS S Leg completed R SG Yoke SG Shim SG Yoke 2 027P SG Bolt 2 027S S Pin 2 031P 3204 Cotter pin 4x40 2 CSN S Split pin 4x40 2 CSN Nut M 8 4 CSN Washer DIN 125 A Split pin 2x20 4 CSN Bolt M 8x60 2 CSN Nut M 8 2 DIN 980 V 104P E Small wheel axle 2 104S S Main wheel axle E Shim 2 106P E Bolt modified 8 106S S Bolt modified Washer Pin 5m6x25 8 ISO L S Left main leg 1 111R S Right main leg

86 LANDING GEAR Tyre / tube

87 LANDING GEAR Tyre / tube Pos. Order number Designation Qty. Standard Note Outer disk - machined 1 002P Completed disk 1 002S S Inner disk complet Brake disc - small 1 006P Ring 1 006S S Spacer Bolt modified Tire tube Cheng Shin 15x main wheel Tire Cheng Shin 15x main wheel Screw M 8x12 3 CSN Washer CSN Washer ONL Balance weight 5g, 10g 1 101P Disk with hub - machined 1 101S S Inner disk Spacer ring Threaded insert M 6x Bearing 6004 ZZ 2 CSN Ring lock 42 2 CSN P Brake holder 1 201S S Brake holder

88 LANDING GEAR Wheel pants

89 LANDING GEAR Wheel pants Pos. Order number Designation Qty. Standard Note 001 S Nose wheel cover 1 002P E Main wheel cover - LH 1 002S S Wheel cover L 1 003P E Main wheel cover - RH 1 003S S Wheel cover R

90 LANDING GEAR Main wheel cover attachment 5.4.1PLUS 90

91 LANDING GEAR Main wheel cover attachment 5.4.1PLUS Pos. Order number Designation Qty. Standard Note 001 E Butterfly E Spacer Bolt modified Screw M 4x16 16 ECO-FIX Washer DIN 125 A Washer DIN Nut M 4 16 ONL

92 LANDING GEAR Main wheel cover attachment 5.4.1SL 92

93 LANDING GEAR Main wheel cover attachment Pos. Order number Designation Qty. Standard Note 001 S Wing-nut completed L S Wing-nut completed R E Spacer Bolt modified Nut M 5 6 ONL Connector Faston 6.3x HN Screw M 5x16 6 ISO Washer DIN 125 A Washer ISO Washer CSN S Wing-nut L S Wing-nut R Blind rivet 3.2x AVEX Blind rivet 4.0x AVEX SL 93

94 LANDING GEAR Brake system (four pumps system)

95 LANDING GEAR Brake system (four pumps system) Pos. Order number Designation Qty. Standard Note 001 E Dual pump assy LH E Dual pump assy RH 1 003P E Brake pump 2 003S S Break pump 2 004L Brake stirrup LH 1 004R Brake stirrup RH E Brake pad 2 for one wheel 007P Cotter pin 2x14 2 CSN for one wheel 007S S Fuse Pin 8x22 2 ONL

96 LANDING GEAR Brake pump (E ) 5.5.1PLUS 96

97 LANDING GEAR Brake pump (E ) 5.5.1PLUS Pos. Order number Designation Qty. Standard Note 001 E Holder 1 glued with pos E Working barrel 1 glued with pos E Plug E Piston Ring - O 20x Cuff U 11x3x4.5 1 RUBENA E Spring E Shim Ring 7 1 CSN Nut M 6 1 CSN Fork with pin 6x12 1 DIN BN 484, BN E Cover Screw M 4x5 1 DIN A2F 97

98 LANDING GEAR Brake pump (S ) 5.5.1SL 98

99 LANDING GEAR Brake pump (S ) Pos. Order number Designation Qty. Standard Note 001 S Pump casing E Working barrel S Cover S Piston E Safety nut E Spring Cuff U 11x3x4.5 1 RUBENA Fork with pin 6x12 1 DIN BN 484, BN Ring - O 7.3x Ring - O 20x SL 99

100 LANDING GEAR Double brake pump (E /02)

101 Double brake pump (E /02) Pos. Order number Designation Qty. Standard Note 001 E Brake pump housing 002 E Tube 003 E Piston 004 E Cylinder plug 005 E Safety nut 006 E Piston 007 E Brake cylinder filling 008 E Bolt 010 E Spring 011 E Spring LANDING GEAR Fork with pin 6x12 DIN BN 484, BN Ring lock Ring 4x Ring - O 7.3x Ring 11.3x Ring 5.6x

102 LANDING GEAR Brake cylinder

103 LANDING GEAR Brake cylinder Pos. Order number Designation Qty. Standard Note Plug 1 002L Brake cylinder - housing L 1 002R Brake cylinder - housing R Piston Angular connection set 1 CSN Cuff 1 CSN Ring 24x Ring 25x Vent screw M

104 LANDING GEAR Dual brake system 5.6PLUS 104

105 LANDING GEAR Dual brake system 5.6PLUS Pos. Order number Designation Qty. Standard Note 001 E Brake cylinder bracket E Bronze bearing E Brake pedal E Brake pedal E Safety ring E Dual pump assy LH E Dual pump assy RH E Brake pump E Bolt modified Angular connection set 4 CSN Screw M 4x30 1 ISO Nut M 4 1 DIN 980 V Washer DIN 125A Self locking nut M6 1 DIN V Pin 5x20 4 ONL Washer DIN Split pin 1.6x12 4 CSN Split pin 2x20 2 CSN Clamp 1x6 6 CSN Screw M 4x12 6 ECO-FIX Nut M Bushing 4.5x1 2 CSN Fastener band 2.5x HN Protective spiral 10x MON Fastener band 4.8x HN (10m) Brake hose Flexion Rivet 2x0.3x8 8 DIN 7340 A Washer DIN A2F 105

106 LANDING GEAR Brake system 5.6SL 106

107 LANDING GEAR Brake system Pos. Order number Designation Qty. Standard Note 007 E Dual pump assy LH E Dual pump assy RH S Break pump E Spacer E Bracket Angular connection set 2 CSN Nut M 4 1 DIN 980 V Washer DIN 125A Hose clip Pin 5x20 4 ONL Washer DIN Split pin 1.6x12 4 CSN Clamp 1x6 6 AEN Screw M 4x12 7 ECO-FIX Nut M Bushing 4.5x1 2 CSN Fastener band 2.5x HN Protective spiral 10x MON Fastener band 4.8x HN (10m) Brake hose Flexion Rivet 2x0.3x8 8 DIN 7340 A (2.00m) Hose Aerotec Pa Air gun pot R SL Direct panel connection 6/4 - M 10x Angular connection with external thread 6/4-1/ Washer DIN 125-1A Clamp 2x6 1 CSN Rivet 4x AVINOX 107

108 LANDING GEAR Rudder and flaps control 5.7PLUS 108

109 LANDING GEAR Rudder and flaps control 5.7PLUS Pos. Order number Designation Qty. Standard Note 001 E Completed right rudder pedal E Completed left rudder pedal E Single arm lever S Flap control lever-assy E Rod S Torison tube E Brake pedal E Rope E Control stick sleeve E Outer washer E Bolt modified E Cable termination E Device body E Pedal holder E Bronze bearing E Safety ring Bearing E Bearing Lever Excentric pin Pin Spacer Spacer S Bolt S Bolt Screw M 6x41 3 ONL Screw M 6x23 3 ONL Screw M 4x20 12 ISO Screw M 6x12 2 DIN Screw M 5x16 8 ISO Screw M 6x43 1 ONL Screw M 4x10 4 CSN Screw M 6x33 1 ONL Nut M 5 4 DIN 980 V Self locking nut M6 7 DIN V Nut M 6 5 CSN Nut M 6 7 CSN Nut M 8 2 CSN Nut M 8 2 DIN 980 V 109

110 LANDING GEAR Rudder and flaps control 5.7PLUS Pos. Order number Designation Qty. Standard Note Nut M 4 16 DIN 980 V Washer DIN Washer DIN A2F Washer DIN 125A Washer DIN 125 A Washer ONL E Cable (4m) Tube 8/ Split pin 1.6x12 5 CSN Split pin 2x20 4 CSN Eyepiece 3 2 CSN Tost clamp (nicopress clamp) Tie 1x8 2 AEN Bicycle rubber grip Fastener band 2.5x98 4 PLT1M-C Insulative hose E Bush Blind rivet 3.2x AVEX

111 111

112 LANDING GEAR Rudder and flaps control 5.7SL 112

113 LANDING GEAR Rudder and flaps control Pos. Order number Designation Qty. Standard Note 001 E Pedal assy L E Pedal assy R E Brake cylinder console E Single arm lever S Flap control lever-assy E Rod S Torison tube E Bolt modified E Rope E Control stick sleeve E Outer washer E Bolt modified E Cable termination E Device body E Pedal holder E Bronze bearing Bearing E Bearing Lever Excentric pin Pin Spacer Spacer S Bolt S Bolt Screw M 6x41 3 ONL Screw M 6x23 3 ONL Screw M 4x20 12 ISO Screw M 6x12 2 DIN Screw M 5x16 8 ISO Screw M 6x43 1 ONL Screw M 4x10 4 CSN Screw M 6x33 1 ONL Screw M 4x30 1 ISO Nut M 5 4 DIN 980 V Self locking nut M6 8 DIN V Nut M 6 5 CSN Nut M 6 7 ISO Nut M 8 2 CSN SL 113

114 LANDING GEAR Rudder and flaps control Pos. Order number Designation Qty. Standard Note Nut M 8 2 DIN 980 V Nut M 4 17 DIN 980 V Washer DIN Washer DIN A2F Washer DIN 125A Washer DIN 125 A Washer ONL E Cable (4.00m) Short tube 8x Split pin 1.6x12 5 CSN Split pin 2x20 2 CSN Eyepiece 3 2 CSN Tost clamp (nicopress clamp) Tie 1x8 2 AEN Gripe Fastener band 2.5x98 4 PLT1M-C (0.40m) Shrinking hose RNF E Bush Blind rivet 3.2x AVEX SL 114

115 115

116 LANDING GEAR Pedal assy LH (E ), pedal assy RH (E ) 5.7.1SL 116

117 LANDING GEAR Pedal assy LH (E ), pedal assy RH (E ) Pos. Order number Designation Qty. Standard Note 001 E Pedal LL E Pedal RL E Break body LH E Brake pedal L E Safety ring Bolt M 8x41 2 ONL Nut M 8 2 CSN Washer DIN 125 A Split pin 2x18 2 CSN Split pin 2x20 2 CSN SL Antiskid belt Safety walk TM 76x E Pedal LR E Pedal RR E Break body RH E Brake pedal L E Safety ring E Brake pedal R Bolt M 8x41 2 ONL Nut M 8 2 CSN Washer DIN 125 A Split pin 2x18 2 CSN Split pin 2x20 2 CSN Antiskid belt Safety walk TM 76x

118 LANDING GEAR Parking brake

119 LANDING GEAR Parking brake Pos. Order number Designation Qty. Standard Note 001 E Joint E Joint ass S Under cover E Lever L E Lever R E Rail E Upper stop E Under stop S Couver of parking brake Nut M 10 2 CSN Screw M 3x25 2 CSN Screw M 4x16 2 DIN Nut M 4 6 ONL Screw M 4x28 8 CSN Washer ONL Nut M 4 3 ONL Clamp self-adhesive Brake valve with inner thread 2 SER Screw M 4x12 10 ECO-FIX Fastener band 2.5x HN Angular connection set 4 CSN Rivet 2x0.3x8 4 DIN 7340 A Blind rivet 3.2x AVEX

120 POWER UNIT Exhaust system

121 POWER UNIT Exhaust system Pos. Order number Designation Qty. Standard Note Exhaust muffler E LH front exhaust - gas tube 1 003P E LH rear exhaust - gas tube 1 003S E Rear exhaust E RH front exhaust - gas tube 1 005P E RH rear exhaust - gas tube Clamp M

122 POWER UNIT Auxiliary fuel pump installation

123 POWER UNIT Auxiliary fuel pump installation Pos. Order number Designation Qty. Standard Note Bushing (in firewall) Clip Cobra 11/ Distributor MON Self locking nut M6 1 DIN V (1.00m) Hose for engine fuels FUB Clip Cobra 12/ Nut M 10 1 ISO Washer DIN 125-1A Fuel pump Pierburg 12V Fuel one-way check valve Circuit braker 2TC Switch 1PDT Cable eye Cable eye Faston AEG (3.80m) Wire AE (1.00m) Shrinking hose HFT (0.04m) Shrinking hose HFT Fastener band 2.5x98 10 PLT1M-C Cable tie 3.6x142 5 PLT1.5I-C

124 POWER UNIT Water cooling

125 POWER UNIT Water cooling Pos. Order number Designation Qty. Standard Note 001 E Holder lower assembly 1 002P E Holder upper assembly 1 002S S Holder upper assembly Spacing tube Connector E Tuber R E Expansion system pot Cable tie 3.6x PLT1.5I-C Fastener band 4.8x HN E Tube L Nut M 4 2 DIN E Bolt Bolt M 4x8 2 ECO-FIX Washer CSN Washer DIN 125A Clip Cobra 12/ Hose clip Washer DIN 125-1A (0.60m) Hose for engine fuels FUB Screw M 4x16 6 ECO-FIX 023P E Washer 2 023S E Washer 4 024P Washer DIN S Washer DIN (0.30m) Rubber hose for water cooler (0.80m) Hose Hilcoflex (0.60m) Hose Hilcoflex (0.20m) Hose Hilcoflex Bottle holder Glue Loctite

126 POWER UNIT Oil installation R 912S

127 POWER UNIT Oil installation R 912S Pos. Order number Designation Qty. Standard Note 001 E Reduction E Cooler holder E Cooler strut E Oil cooler inlet E Washer Clip Cobra 14/ (0.50m) Hose for engine fuels FUB Bolt M 5x16 2 CSN Nut M 5 2 DIN 980 V Washer DIN Clip Torro Sealing ring 14x18 3 CSN Washer DIN A2F Nut M 10 1 CSN Self locking nut M6 2 DIN V Clamp 1x16 1 CSN Sealing ring 10 1 CSN Shock mount Fastener band 2.5x98 5 PLT1M-C S1 rubber - oil proof Rivet 3.2x7.9 2 AVEX Glue Loctite

128 POWER UNIT Heating + both sides windshield air blowing 6.5PLUS 128

129 POWER UNIT Heating + both sides windshield air blowing 6.5PLUS Pos. Order number Designation Qty. Standard Note 001 E Exchanger E Gripe S Front flap S Rear flap Endpiece S Air vent E Bowden bracket E Rod set (0.60m) Air hose Flexadur VMX-2LH Hose clip Fastener band 3.6x HN Fork Clamp 1x4 2 CSN Flag (3.40m) Air hose VMX-2LH Bolt M 3x4 2 DIN Bolt M 4x4 2 DIN Nut M 6 2 DIN (0.03m) Short tube 8x Hose clip 16-27/ Air inlet (3.00m) Bowden hose Bolt M 4x12 2 ISO Nut M 4 2 DIN 980 V Washer DIN 125A Rivet 3.2x AVEX Blind rivet 4.0x9.5 1 AVEX

130 POWER UNIT Heating + both sides windshield air blowing 6.5SL 130

131 POWER UNIT Heating + both sides windshield air blowing Pos. Order number Designation Qty. Standard Note 001 S Heat-engine flap S Shutting flap S Air vent E Exchanger E Gripe Endpiece E Angle E Rod set S Bracket (1.40m) Air hose Flexadur VMX-2LH (0.40m) Air hose Flexadur CRX-2LH (4.00m) Air hose Flexadur CRX-2LH Air inlet Hose clip Fastener band 3.6x HN Fastener band 4.8x HN Fork Clamp 1x4 3 CSN Air vent Flag Bolt M 3x4 3 DIN Bolt M 4x4 3 DIN Nut M 6 3 DIN (0.06m) Short tube 8x (4.50m) Bowden hose Bolt M 4x12 2 ISO Nut M 4 2 DIN 980 V Washer DIN 125A Rivet 3.2x BE Rivet 3.2x7.9 4 AVEX SL 131

132 INSTALLATIONS Electrical system

133 INSTALLATIONS Electrical system Pos. Order number Designation Qty. Standard Note Circuit breaker 1A Circuit breaker 2A Circuit breaker 3A Circuit breaker 7.5A Circuit breaker 10A Circuit breaker 30A Master switch 2PDT Switch 1PDT Relay 12V/30A Lamp for whelen 1 A715 G4509-PAR Lamp for front reflectors 50W

134 INSTALLATIONS Electric trim tab control

135 INSTALLATIONS Electric trim tab control Pos. Order number Designation Qty. Standard Note 001 E Trim tab bracket 1 002P E Rubber border E Bushing E Pad 1 006P E Trim tab tip E Sleeve 1 008P E Cover 1 009S E Gland E Tube Screw M 3x10 4 DIN 7516A-8.8-A2F 015P Screw M 3x10 4 DIN P 1826 Screw M 4x16 1 CSN S Bolt M 4x16 1 ISO Washer DIN 125A Nut M 4 1 DIN 980 V Bush 4.5x2 1 CSN Trim installation kit Trim servo Grip G S 6472 Rivet 3.2x7.9 4 AVEX S Rivet 4x AVINOX 703P 3257 Rivet 3.5x9 3 CSN P 8398 Blind rivet 3.0x6.7 8 AVEX

136 INSTALLATIONS Stall warning system

137 INSTALLATIONS Stall warning system Pos. Order number Designation Qty. Standard Note 001 E Bracket Lift detector Circuit breaker 2TC Socket housing 2pos Pin housing 2pos Socket (AWG22-18) Pin (AWG22-18) Cable eye Wire AE Heat shirink tube HFT Heat shirink tube HFT Hose Fastener band 2.5x98 15 PLT1M-C Cable tie 3.6x142 6 PLT1.5I-C Bushing 3.5x Screw M 3x Nut M Washer CSN Rivet 3.2x7.9 6 AVEX

138 INSTALLATIONS Digiflight IIVS Trutrak Auto Pilot

139 INSTALLATIONS Digiflight IIVS Trutrak Auto Pilot Pos. Order number Designation Qty. Standard Note Autopilot Digiflight IIVS 1 D-IIVS Servo Basic - B 1 DSB-B Servo Pitch - C 1 DSP-C Digiflight II/ADI Pilot II con Circuit breaker 2TC MS Switch 1PDT Fitting 2 A Plastic manifold Plastic manifold Cobra clip 8/ Cobra clip 9/ (0.50m) Tubclair 5/8 hose Cable eye Faston AEG (28m) Wire AE (10m) Wire AE (2.6m) Wire shield SE (0.50m) Heat shirink tube HFT (0.10m) Heat shirink tube HFT Protective spiral 10x MON Fastener band 2.5x98 30 PLT1M-C Cable tie 3.6x PLT1.5I-C Clamp self-adhesive Screw,pan head,black 6-32x3/

140 INSTALLATIONS Cockpit lighting for Koger sunshade

141 INSTALLATIONS Cockpit lighting for Koger sunshade Pos. Order number Designation Qty. Standard Note 001 S Guide Interior lamp Circuit breaker 2TC Switch 1PDT Socket housing 2pos Pin housing 2pos Socket (AWG22-18) Pin (AWG22-18) Cable eye Faston AEG (9.8m) Wire AE (4.0m) Heat shirink tube HFT (0.20m) Heat shirink tube HFT Fastener band 2.5x98 23 PLT1M-C Bushing 3.5x Screw M 3x16 2 DIN Screw M 3x20 1 DIN Nut M

142 INSTALLATIONS Fuel instalation - integral tanks

143 INSTALLATIONS Fuel instalation - integral tanks Pos. Order number Designation Qty. Standard Note 001 S Fitting Bushing (in firewall) E Branch with nozzle S Placard - suction S Placard - return Screw M 4x10 25 CSN Screw M 5x16 3 ISO Nut M Nut M 4 21 DIN 980 V Nut M 5 3 DIN 980 V Nut M 10 4 ISO Washer DIN 125A Washer DIN Washer DIN 125-1A Loop 1x12 11 AEN Sealing ring 14x18 6 CSN Bonding jumpers ONL Bush 7x1 3 CSN Bush 13x2 1 CSN Fuel cock 1 FS20x2-F Filter UFI (10m) Oil hose Tube 6x Fitting Clip Cobra 11/ Clip Cobra 12/ Clamp self-adhesive Cable tie 3.6x PLT1.5I-C Protective spiral 10x MON Clip Cobra 12/ Rivet 3.2x AVEX

144 COCKPIT EQUIPMENT Cockpit equipment

145 COCKPIT EQUIPMENT Cockpit equipment Pos. Order number Designation Qty. Standard Note 001 E Bucket seat-squab LH E Bucket seat-squab RH E Bucket seat-bolster LH E Bucket seat-bolster RH E Control stick sleeve 2 007P E Carpet 1 007S S Floor carpet 1 008P E Four point safety harness 2 008S E Four-points belts - SL E Bucket seat-supporting rest E Baffle assembly LH E Baffle assembly RH Capping strip - assembly 1 013S S Baggage compartment carpet 1 014P E Front carpet 1 014S S Front carpet S Baffle assembly LH S Baffle assembly RH 1 019S S Support covering sheet 1 020S S Gland 4 022S 6353 (6.70m) Velcro fastener - hooks + eyes 1 023S Frame with net - small 2 026S Baggage compartment net 1 027S Plastic two-hook 2 028S 1841 Bolt M 5x25 2 CSN S Washer DIN S Ring GMi S 6812 Washer DIN 125A-8 032S 6656 Upholstering washer / S S Handle 1 036S S Elbow board L 1 037S S Elbow board R 1 038S S Handle 1 040S E Support pocket 2 700S 6472 Rivet 3.2x7.9 4 AVEX S 8493 Blind rivet 4.0x9.5 8 AVEX S 6794 Blind rivet 4.0x AVEX

146 COCKPIT EQUIPMENT Koger sunshade

147 COCKPIT EQUIPMENT Koger sunshade Pos. Order number Designation Qty. Standard Note Koger sunshade Screw M 3x12 5 ISO Nut M

148 OPTIONAL EQUIPMENT Ground equipment

149 OPTIONAL EQUIPMENT Ground equipment Pos. Order number Designation Qty. Standard Note 001 E Canopy cover - wide Sleeve for equipment Fixing strap - assembly Ground anchor Folding trig Big bag S Drawbar S S Spare connecting parts 1 set see table Sun shade Valve extension 1 for front tire 011 S Pitot tube cover Set of metric wrenches and allen wrenches 1 set 149

150 OPTIONAL EQUIPMENT Spare connecting parts S S

151 OPTIONAL EQUIPMENT Spare connecting parts S S Pos. Order number Designation Qty. Standard Note Bolt M 4x12 10 engine cowling, wing to fuselage fairing Bolt M 4x12 (flush head) 10 removable upper cover in front of cockpit Ring 4x2 1 double hydraulic brake pump Ring - O 7.3x2.4 1 double hydraulic brake pump Ring 11.3x2.4 1 double hydraulic brake pump Ring 5.6x2.4 1 double hydraulic brake pump Bolt M 4x16 15 to fix main wheel pants Nut M 6 4 CSN flight control, rudder attachment Nut M 8 2 CSN to fix main landing gear leg Nut M 4 4 DIN 980 V flight control Nut M 5 4 DIN 980 V flight control Self locking nut M6 6 DIN V flight control Washer DIN 125A-8 under appropriate nut Washer under appropriate nut Washer DIN A2F under appropriate nut Washer CSN under appropriate nut Split pin 1x12 2 CSN to lock rudder nut Cotter pin 1.6x20 8 to lock flight control elements Split pin 2x20 6 CSN to lock stabilizer and main landing gear leg attachment Cotter pin 2.5x25 2 to lock front landing gear leg Cotter pin 4x40 3 CSN to lock wheel nuts Washer ONL to lock nuts of the flight control elements Screw M 8x12 3 CSN to fix brake disc Washer ONL to lock brake disc bolts Safety pin ONL 3345 to lock wing suspension pins Cuff U 11x3x4.5 2 RUBENA hydraulic brake pump Ring - O 20x1.5 2 hydraulic brake pump

152 OPTIONAL EQUIPMENT Instrument board shelter for NVFR

153 OPTIONAL EQUIPMENT Instrument board shelter for NVFR Pos. Order number Designation Qty. Standard Note 001P S Shade 1 001S S Shade 1 010P Screw M 3x16 8 DIN 85 A 010S Screw M 3x16 6 DIN 85 A 012S 6938 Nut M P 6811 Washer DIN S 6811 Washer DIN

154 INDEX Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos PL SL SL (0.04m) (0.10m) PL (0.20m) SL PL (0.50m) PL SL (1.00m) SL (4.0m) (0.22m) P PL SL PL SL (0.50m) P PL P SL PL PL PL SL PL SL PL SL PL SL SL PL S SL P S PL SL B PL B SL SL PL SL PL SL PL SL P (28m) S (3.80m) (9.8m) (10m) PL (2.6m)

155 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos (0.30m) PL S PL SL PL SL PL PL S S PL PL PL SL PL P SL S PL SL PL P P PL P SL P A S PL S SL PL PL SL PL SL PL PL PL SL SL SL PL S SL P PL P SL PL SL PL S PL S PL P S PL P SL SL PL PL PL SL

156 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos S (1.40m) 6.5SL PL SL P PL (3.00m) 6.5PL SL (4.50m) 6.5SL PL PL SL SL SL SL PL PL SL PL (3.40m) 6.5PL PL PL S SL S PL SL PL P PL SL PL PL PL S SL SL S P S SL PL PL S SL S S P PL PL SL PL PL P SL S PL P SL P SL S P SL PL PL S SL PL PL SL SL P S S SL P (0.60m) 6.5PL S SL

157 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos PL SL P S PL P SL (0.80m) P S (0.60m) S (0.20m) S SL P S S PL SL PL SL SL SL SL PL (2.00m) 5.6SL SL PL PL SL SL SL (0.40m) 6.5SL PL SL SL SL PL SL SL SL PL PL (4.00m) 6.5SL SL SL SL S S S S SL PL P S SL SL S 6353 (6.70m) S PL PL SL SL SL PL PL SL SL (0.40m) 5.7SL SL S PL S PL PL PL SL P SL P S S PL PL SL SL PL

158 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos SL PL PL SL SL PL PL S PL PL PL PL PL SL SL L P PL R S PL PL SL L PL PL SL SL R PL PL PL SL PL PL PL SL SL SL PL SL PL P SL S SL PL S PL SL S SL PL PL SL SL PL SL SL P (0.05m) SL (0.60m) PL (1.00m) P SL (10m) P (2.50m) P P S P S P (0.50m) P R 6945 (0.80m) 1.6SL S L P L P PL S R SL P S PL PL P SL SL S

159 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos (0.03m) 6.5PL 024 E (0.06m) 6.5SL 118 E (0.10m) E (4.00m) 5.7SL 063 E (4m) 5.7PL 063 E E SL 702 E P PL 729 E P PL SL 729 E P SL E P E P PL S 704 E S P PL 702 E S S E (10m) 5.6PL E (10m) 5.6SL E SL PL 059 E SL 059 E E P PL PL 023 E S SL SL 023 E PL PL 064 E SL SL 064 E P E P PL 030 E S SL 030 E E E E P 011 E S 022 E E P 302 E PL S 017 E SL S 117 E PL 012 E E S PL E SL E E E P PL 031 E S PL SL 031 E P SL E S SL 039 E S 036 E P 705 E E S 705 E E P E E P

160 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos. E S 037 E S 322 E P 004 E P 038 E E S 004 E S 038 E PL 106 E P 014 E P 032 E PL 014 E S 014 E S 032 E PL 012 E P 008 E P 030 E PL 048 E E S 030 E PL 049 E P 012 E P 031 E PL 006 E P 013 E S 031 E PL 008 E P 016 E P E PL 017 E P 009 E PL 011 E PL 016 E S 009 E SL 011 E PL 013 E P 007 E P 139 E PL 009 E S 007 E S 139 E PL 001 E P E P 140 E PL 029 E P 018 E S 140 E PL 002 E S 018 E E PL 010 E P 005 E E PL 011 E S 005 E E PL 015 E P 006 E E P 036 E S 006 E P 161 E S 036 E P 019 E S 161 E A E S 019 E P 162 E P E P 020 E S 162 E P E S 020 E PL 026 E E P 011 E E E S 011 E E E E E P E E E E S 032 E E E P E P E E S E P 051 E E E P 052 E E S 030 E E P E P E E E E E E S 031 E P 122 E E PL 009 E S 122 E E SL 009 E P 123 E E PL 016 E S 123 E E SL 016 E E E PL 004 E E E SL 004 E E E PL 006 E E P 001 E SL 006 E E S 001 E PL 004 E E P 002 E PL 008 E P 072 E S 002 E PL 005 E P E P 003 E PL 006 E S 321 E S 003 E S

161 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos. E S 105 E PL 009 E S E PL 021 E E E PL 019 E E E SL 019 E E E PL 003 E E PL 002 E PL 020 E S 005 E SL 005 E SL 020 E E PL 010 E PL 010 E E PL 011 E SL 010 E E PL 010A E PL 015 E S 006 E PL 011A E SL 015 E E E PL 062 E E E SL 062 E E P E PL 079 E E S E SL 079 E PL 007 E E S 004 E SL 007 E E S 104 E E P E S 106 E PL 008 E E PL 001 E SL 008 E E S 001 E P 001 E E S 101 E P 007 E E S 102 E P 002 E S 302 E P E S 002 E PL 008 E P E P 012 E SL 008 E PL 012 E P 003 E SL 007 E SL 012 E P 004 E PL 007 E PL 024 E P 008 E P E SL 024 E P 001 E E PL 002 E E E PL 001 E P 006 E P E SL 003 E S 006 E E S 002 E P E S E SL 001 E E E S 003 E P E P E SL 002 E P E E S 103 E P E E E SL 010 E E E SL 012 E E E P E E E E S E E E PL 001 E E E SL 004 E E P E E SL 019 E S S S E PL 010 E S E SL 008 E S E P E S E P E P S E P E P S

162 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos. S S S S S S S S S S S S S S SL 012 S S S P 006 S S S S S S S S S S S S 323 S S S S L S S S R S S S L S S S R S S S S P 044 S S L S S 044 S S R S P 050 S S L S S 050 S S R S S S L S S 006 S S R S S 315 S S L S S 316 S S R S S 317 S P 002 S S S S 318 S S S S S 319 S P 079 S S S S 320 S S 079 S S S 051 S S S S S 052 S L S S S R S P 010 S S 003 S L S S 010 S S 202 S R S S S S S PL 007 S S S S SL 007 S S 102 S S S SL 008 S S S SL 001 S S S SL 005 S L S S SL 028 S R S S SL 029 S L S S SL 002 S R S S S 007 S S PL 005 S S 008 S S SL 005 S SL 013 S S S SL 014 S S S SL 015 S S S SL 011 S S PL 032 S SL 016 S S SL 032 S SL 017 S S PL 033 S SL 001 S S SL 033 S SL 005 S S S 162

163 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos. S S S SG S P S SG S S S SG S S S SG S S SG S S SG S S S SG S S S S SG S S S SG S S PL 003 SG S S S PL 004 SG S S S PL 006 SG S S SL 003 SG S S SL 009 SG S S S SL 002 SG S S S SL 001 SG S S S S SG S S SG S L S SG S R S P SG S S SG SG S S SG SG S S SG SG S S SG SG P 069 S S SG SG S 069 S LS SG SG P 070 S RS SG P SG S 070 S S SG SG S S SG SG S S SG SG S S SG SG S SL 009 SG SG S S 001 SG SG S S 003 SG SG S S 004 SG SG S S SG SG S S 001 SG SG S S 002 SG SG P S S 101 SG P 047 SG P 078 S S 102 SG S 047 SG S 078 S S SG P 048 SG P 080 S S SG S 048 SG S 080 S S SG SG P S LP SG SG S RP SG SG P S S SG SG P S SL 001 SG SG S SL 002 SG SG S SG SG

164 Order num. Tab. Pos. Order num. Tab. Pos. Order num. Tab. Pos. SG SG SG SG SG SG SG SG SG SG SG SG B SG XXXXX 1.5PL 011B SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG SG L SG R SG SG L SG R SG SG SG SG SG SG SG SG SG SG SG P 021 SG S 021 SG P 022 SG S 022 SG SG SG SG SG SG

165 165

EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice

EVEKTOR AEROTECHNIK a.s. tel.: Letecka 1384 fax: Kunovice EVEKTOR AEROTECHNIK a.s. tel.: +420 572 537 111 Letecka 1384 fax: +420 572 537 900 686 04 Kunovice email: marketing@evektor.cz Czech Republic http://www.evektor.cz EvektorAerotechnik a.s. 2005 0. GENERAL

More information

Parts Catalog Admiral 28 Cylindrical Scrubber

Parts Catalog Admiral 28 Cylindrical Scrubber Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14

More information

Zodiac CH 601 XL drawing revision log, updates included in 4 th Edition, January 1, 2008.

Zodiac CH 601 XL drawing revision log, updates included in 4 th Edition, January 1, 2008. Zodiac CH 601 XL drawing revision log, updates included in 4 th Edition, January 1, 2008. 6-X-0 6-X-1 6-T-0 6-T-1 6-T-2 6-T-3 6-T-4 6-T-5 6-T-6 6-W-0 6-W-00 6-W-1 6-W-2 6-W-3 6-W-4 6-W-5 6-W-6 01/08 DRAWING

More information

MMZ jr Hydrostatic Zero-Turn Riding Mower

MMZ jr Hydrostatic Zero-Turn Riding Mower MMZ jr. Hydrostatic Zero-Turn Riding Mower MODEL ABM HP " Stamped Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS " Cutter Deck............................. and " Spindle Assembly.........................

More information

Parts Catalog Collector 34 Model Gasoline

Parts Catalog Collector 34 Model Gasoline Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1

More information

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort

More information

Parts Catalog Collector 34 Model Battery

Parts Catalog Collector 34 Model Battery Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1

More information

Copyright 2005 Valmont Industries, Inc.

Copyright 2005 Valmont Industries, Inc. Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...

More information

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.

More information

12. Wings, Flaps, Ailerons and Struts

12. Wings, Flaps, Ailerons and Struts 12. Wings, Flaps, Ailerons and Struts Fit Aileron Hinges Reference: Drawing 20270K2 Photo 12.1 Parts Required: 2007092 Aileron LS 200809N Aileron RS 2001394 Hinge 3/16 A1 (4) 2001694 Hinge Pin (4) PH0059N

More information

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise

More information

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve

More information

STOL CH nd Edition Drawings July 20, 2010 Summary of changes from Edition 1 to Edition 2.

STOL CH nd Edition Drawings July 20, 2010 Summary of changes from Edition 1 to Edition 2. STOL CH 750 2 nd Edition Drawings July 20, 2010 Summary of changes from Edition 1 to Edition 2. Page Date Drawing Title 75-G-0 07/10 Three View Drawing 75-G-1 07/10 Drawings Index 75-G-2 03/10 General

More information

Builders Log Report S

Builders Log Report S 12/09/01 Reamed Horizontal Stabilizer Bushings I reamed seven bushing locations to.4375 where elevator attaches to horizontal stabilizer. The proximity of the locations to structural tubing made it difficult

More information

Parts Manual SPDZTR 42 / SPDZTR 42 BF /

Parts Manual SPDZTR 42 / SPDZTR 42 BF / Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to

More information

STOL CH st Edition 1 st Revision Drawings Summary of changes from Edition 1 to Edition 1 Revision 1.

STOL CH st Edition 1 st Revision Drawings Summary of changes from Edition 1 to Edition 1 Revision 1. STOL CH 750 1 st Edition 1 st Revision Drawings Summary of changes from Edition 1 to Edition 1 Revision 1. Page Date Drawing Title 75-G-0 01/10 Three View Drawing 75-G-1 01/10 Drawings Index 75-RX-1 05/09

More information

FORWARD FUSELAGE SIDES & REAR TOP SKINS

FORWARD FUSELAGE SIDES & REAR TOP SKINS FORWARD FUSELAGE SIDES & REAR TOP SKINS WORK REPORT Step No. Check Parts / Tools Qty Preparations. 1 [ ] 6F5-3 Upper Front Longerons 2 2 [ ] 6F5-5 Heel Support 1 3 [ ] 6F5-2 Front Floor Skin 1 3 [ ] Firewall

More information

MANUAL REV. 03 (11/26/01)

MANUAL REV. 03 (11/26/01) Parts Manual MANUAL 539105906 REV. 03 (11/26/01) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185

More information

Diesel Pile Hammer D30-32 Part # 66508

Diesel Pile Hammer D30-32 Part # 66508 Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner

More information

HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front

HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge

More information

Illustrated Parts: Model 853

Illustrated Parts: Model 853 Illustrated Parts: Model 853 BCS America LLC 5001 N Lagoon Ave Portland, OR 97217 Revised 09/20/2017 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Bumper Accessories ------ - 823956 01.00 800.010-01.3

More information

TROLLA LEAVY 97 CM Lawn sweeper

TROLLA LEAVY 97 CM Lawn sweeper TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may

More information

PARTS MANUAL Rev A

PARTS MANUAL Rev A PARTS MANUAL 4000394 Table of Contents Part Index for Trailer --------------------------------------------- 2 Trailer Figure ----------------------------------------------------- 6 Trailer Figure 2 -----------------------------------------------------

More information

LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage.

LANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage. LANDING GEAR 1. Fit landing gear into slots on bottom of fuselage. 4. Use channel-lock pliers to press blind nuts into position (note: drilled hole should be slightly smaller than shaft of blind nut for

More information

Diesel Hammer Model D19-42 Part #

Diesel Hammer Model D19-42 Part # Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2

More information

Electronic Service Manuals

Electronic Service Manuals Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions

More information

Corvus Racer CC

Corvus Racer CC Corvus Racer 540 35CC Item No:L-G035008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio mm mm 1200sq in (77.4sqdm) 9.9-12lbs(4.5-5.5kg) 91-1.20(2C) 1.10-1.40(4C) 20-40cc

More information

Parts Manual. English

Parts Manual. English Parts Manual WHF4817 / 966947005 WHF3617 / 966947008 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2009 HTC. All rights reserved.

More information

Illustrated Parts Manual

Illustrated Parts Manual Illustrated Parts Manual Mustang Series RZT TROY-BILT LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (December, 0) To The Owner Thank You Thank you for purchasing an MTD Zero-Turn Tractor.

More information

Illustrated Pats List

Illustrated Pats List Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should

More information

Parts Manual SPEEDZTR 42 / SPEEDZTR 42BF / SPEEDZTR 46BF / SPEEDZTR 48BF / SPEEDZTR 54BF /

Parts Manual SPEEDZTR 42 / SPEEDZTR 42BF / SPEEDZTR 46BF / SPEEDZTR 48BF / SPEEDZTR 54BF / Parts Manual SPEEDZTR 42 / 6603801 SPEEDZTR 42BF / 66054201 SPEEDZTR 46BF / 658831 SPEEDZTR 48BF / 65883501 SPEEDZTR 54BF / 65883201 Please read the operator s manual carefully and make sure you understand

More information

ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL REV.

ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL REV. Parts Manual Models ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL 106149 REV. 04 (10/09/02) Model Number: Serial Number: Date of Purchase:

More information

Parts Manual SPEEDZTR 42SE /

Parts Manual SPEEDZTR 42SE / Parts Manual SPEEDZTR 42SE / 96667602 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is

More information

Parts Manual RZ4221 BF /

Parts Manual RZ4221 BF / Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4221 BF / 9676101 Please

More information

Model No: TC10. Parts Information: Tyre Changer - Automatic

Model No: TC10. Parts Information: Tyre Changer - Automatic Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10

More information

Parts Manual for: MODELS / I.D. : 968999150 / ZTH4217A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort to keep pace with changes in technology,

More information

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar

More information

Parts Manual RZ4623 /

Parts Manual RZ4623 / Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4623 / 967009801 Please

More information

Parts Manual. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.

Parts Manual. Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 SPDZTR 46 / 966657801 SPDZTR 42 CA / 966657901 SPDZTR 46 BF / 966658001 SPDZTR 48 / 966698601 SPDZTR 54 / 966658201 SPDZTR 54 / 966658301 SPDZTR

More information

Parts Manual. Ultra 52 / Ultra 52 BF / Ultra 61 / Ultra 61BF /

Parts Manual. Ultra 52 / Ultra 52 BF / Ultra 61 / Ultra 61BF / Parts Manual Ultra 52 / 966690601 Ultra 52 BF / 966690602 Ultra 61 / 966611801 Ultra 61BF / 966611802 Please read the operator s manual carefully and make sure you understand the instructions before using

More information

-en. Belt Drive Walk Behind Commercial Mower 32" 36" s:: ~ en ~ AHA~~ COMPANY! www. BradleyMowers.com

-en. Belt Drive Walk Behind Commercial Mower 32 36 s:: ~ en ~ AHA~~ COMPANY! www. BradleyMowers.com Belt Drive Walk Behind Commercial Mower 32" 36" 0 ~ z m ;c - en s:: )> z c )> r ~ ~ ~ en r -en -1 1 www. BradleyMowers.com ~ AHA~~ COMPANY! Bradley Mowers Belt Drive Parts 33 Frame Assembly 34 Frame Assembly

More information

MANUAL REV. 09 (04/20/06)

MANUAL REV. 09 (04/20/06) Parts Manual MANUAL 539105906 REV. 09 (04/20/06) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185

More information

STANDARD CANOPY WORK REPORT B-1

STANDARD CANOPY WORK REPORT B-1 STANDARD CANOPY WORK REPORT B-1 No. Check Parts / Tools Qty _ Canopy Lock 1 [ ] 6E2-3 Canopy Hinge Block 1 2 [ ] 6E4-5 Canopy Side Frame 2 2 [ ] 6E2-1 Canopy Lock Assembly 1L + 1R 3 [ ] 6E2-4 Rear Lock

More information

Parts Catalog Apex 47 Series Model Gasoline & LPG

Parts Catalog Apex 47 Series Model Gasoline & LPG Parts Catalog Table of Contents Side brush R.H. (97085690)... 4 Front wheel drive (97086235)... 8 Travelling mechanism (Part 1) (97077168-1)... 12 Travelling mechanism (Part 2) - Accelerator (97077168-2)...

More information

Aircraft assembly and disassembly

Aircraft assembly and disassembly Following instructions are related to ATEC 321(322) FAETA with wingtanks, but in general the basic methodics (besides several few differencies) is applicable also to other ATEC models. Aircraft assembly

More information

D300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX

D300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION

More information

Parts List: VBS-3612 Band Saw

Parts List: VBS-3612 Band Saw Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...

More information

Edge 540 V3 35CC. Scheme A. Item No:L G Specifications. Flying Weight

Edge 540 V3 35CC.  Scheme A. Item No:L G Specifications. Flying Weight Edge 540 V3 35CC Item No:L G035016 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description 76 (1930mm) 74 (1879mm) 1200sq in(77.4sqdm) 9.9 12lbs(4.5 5.5kg) 91 1.20(2C)

More information

MODEL D DIESEL PILE HAMMER

MODEL D DIESEL PILE HAMMER AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710

More information

3550 PARTS MANUAL TABLE OF CONTENTS BREAKOUT WRENCH ASSEMBLY CARRIAGE ASSEMBLY CONSOLE ASSEMBLY LEFT CONSOLE ASSEMBLY RIGHT ENGINE HOUSING ASSEMBLY

3550 PARTS MANUAL TABLE OF CONTENTS BREAKOUT WRENCH ASSEMBLY CARRIAGE ASSEMBLY CONSOLE ASSEMBLY LEFT CONSOLE ASSEMBLY RIGHT ENGINE HOUSING ASSEMBLY 3550 PARTS MANUAL 4/30/01 3550 PARTS MANUAL TABLE OF CONTENTS 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 BREAKOUT WRENCH ASSEMBLY CARRIAGE ASSEMBLY CONSOLE ASSEMBLY LEFT CONSOLE ASSEMBLY

More information

Parts Manual RZ4824F /

Parts Manual RZ4824F / Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4824F / 967003802 Please

More information

RESolution V2 Manual

RESolution V2 Manual RESolution V2 Manual Note for the German Manual: Yellow Bottle thick CA Pink Bottle Med CA Blue tube 5 minute Epoxy Green tube 90 Minute Epoxy Construction of the Fuselage Step 1: Cover the plan with a

More information

Aichi D3A1 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification:

Aichi D3A1 INSTRUCTION MANUAL SAFETY PRECAUTIONS. Specification: Aichi D3A Specification: Length: 50mm(0. ) Wing span: 057mm( ) Wing area: 7.sq.dm(.sq.ft) Wing loading: 99.9g/sq.dm(3.oz/sq.ft) Flying weight: 7.kg(.7lbs) Radio: ch & 7servos Engine: 0 -cycle C.G: 35mm

More information

Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or Northwest Tillers today

Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or  Northwest Tillers today Table of Contents Section H Section H : Gauge Wheels & Mesh Roller 6½ Gauge Wheel (SRB4098)... H1 9½ Gauge Wheel (SRB4099)... H2 6½ & 9½ Gauge Wheel Hubs... H3 Heavy Duty Gauge Wheel (SRB4070 & SRB4076)...

More information

32 FRONT DECK ASSEMBLY

32 FRONT DECK ASSEMBLY 3 6 K 2 0 PARTS MANUAL 32 FRONT DECK ASSEMBLY 3 1 2 Belt Shield Prior to SN 33333 4 6 21 22 7 24 2 26 14 8 13 12 9 10 11 27 2 28 1 16 2 19 17 30 36 39 39 37 29 60 62 61 3 9 49 41 40 28 48 42 13 43 44 47

More information

Main Drive Components

Main Drive Components Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor

More information

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description

EXTRA 330SC 60CC. Item No:H G Specifications cc gas DA50,DA60, DLE55, DLE60(twin), 3W55. Description EXTRA 330SC 60CC Item No:H G060011 Specifications Wing Span Length Wing Area Flying Weight Gasoline Radio Description Carbon Fibre : 92" (2347mm) 84 1/2 " (2060mm) 1526.8 sq in(98.5sq dm) 16 17lbs(7300

More information

Parts Manual 2200 Bale Hiker

Parts Manual 2200 Bale Hiker Parts Manual 2200 Bale Hiker Part Number K56202-02B IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the

More information

SZD-10 bis CZAPLA ASSEMBLY MANUAL IN PICTURES

SZD-10 bis CZAPLA ASSEMBLY MANUAL IN PICTURES 1 RUDDER Plan and parts: 2 Assembly steps: Photo above: glue together rudder spar, ribs and trailing edge. Clamp spar to a flat surface (chipboard on the photo) and make sure the straight aligment of the

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

Skymaster ARF F-18E Instructions Manual

Skymaster ARF F-18E Instructions Manual Skymaster ARF F-18E Instructions Manual first: Take out the front servos mount, install front fuel tank before installing nose cone connect nose cone to fuselage by 6 screw Take out the 6 screws and Bottom

More information

/ iz4218kaa / iz4818kaa / iz4821kaa / iz5223kaa / iz5223koa MANUAL NO REV.

/ iz4218kaa / iz4818kaa / iz4821kaa / iz5223kaa / iz5223koa MANUAL NO REV. Parts manual Models: 6804 / iz418kaa 6805 / iz4818kaa 6806 / iz481kaa 6807 / iz53kaa 6808 / iz53koa MANUAL NO. 531070 REV. 05 (08/18/04) MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES:

More information

Parts Manual. Field-Pro Heavy Harrow Bar. Part Number H

Parts Manual. Field-Pro Heavy Harrow Bar. Part Number H Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,

More information

Parts Manual RZ4222TF BF /

Parts Manual RZ4222TF BF / Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4222TF BF / 96703601

More information

C-180 Builder s Manual

C-180 Builder s Manual C-180 Builder s Manual. May 20, 2002 Last revised July 11, 2002 Copyright! 2002 Douglas Binder, Mountain Models www.mountainmodels.com sales@mountainmodels.com (719) 630-3186 1 Required Equipment! Xacto

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Turf Equipment MODEL 20HP Enforcer 44 22HP Enforcer 48 23HP Enforcer 54 ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly..................................

More information

96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED

96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED 96 WING SPAN SPITFIRE (COPYRIGHT PROTECTED 2014) ALL RIGHTS RESERVED GENERAL INSTRUCTIONS Should you elect to use the recommended Door Skin, which is 1/8 mahogany plywood measuring 36 x 88. Have it cut

More information

Cut the center and pre-drill the Hinge Plate. Do not drill the Rudder Hinge hole at this time.

Cut the center and pre-drill the Hinge Plate. Do not drill the Rudder Hinge hole at this time. 7F4-1 Upper Rudder Hinge Plate Layout the cut for the Upper Hinge Plate. Measure and mark the center for the Rudder Hinge. The center hinge hole is 75mm from the back edge of 7F4-1. Cut the center and

More information

MODELS 920LS-922LS SERIES

MODELS 920LS-922LS SERIES THE MODELS 90LS-9LS SERIES HYDRAULIC LOG SPLITTER EXPLODED VIEWS WITH PART NUMBERS CONGRATULATIONS! You are now the proud owner of a BARRETO log splitter. The following pages have detailed views of your

More information

HYDRAULIC CONTROL DETAILS PARTS LIST

HYDRAULIC CONTROL DETAILS PARTS LIST Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank

More information

HEADSTOCK (CASTNG & CONTROLS)

HEADSTOCK (CASTNG & CONTROLS) HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR

More information

B50 PARTS TRAILER MOUNTED PUMP MODEL B50 ILLUSTRATED PART MANUAL

B50 PARTS TRAILER MOUNTED PUMP MODEL B50 ILLUSTRATED PART MANUAL TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 REED TRAILER MOUNTED CONCRETE PUMP 05 MODEL ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW TO USE

More information

Parts Manual RZ5426 /

Parts Manual RZ5426 / Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ5426 / 967003606 Please

More information

SECTION 7 - SUSPENSION

SECTION 7 - SUSPENSION For Arctic Cat Discount Parts Call 606-678-9623 or 606-561-4983 SECTION 7 - SUSPENSION TABLE OF CONTENTS Section Front and Rear Suspension Assembly Schematics... 7-2 Shock Absorbers... 7-4 Swing Arms (ACT

More information

2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A.

2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A. Parts Manual LZ22 / 9687901 LZ227 / 968999674 LZ60 / 96899967 LZ7230 / 968999676 LZ6127 / 968999709 Please read the operator s manual carefully and make sure you understand the instructions before using

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040 Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com

More information

/ ZTH5225KAA / ZTH6125KAA / ZTH6123KOLA / ZTH6127KOB / ZTH7227KOB For Serial No & Higher

/ ZTH5225KAA / ZTH6125KAA / ZTH6123KOLA / ZTH6127KOB / ZTH7227KOB For Serial No & Higher Parts Manual Models: 968999185 / ZTH5225KAA 968999186 / ZTH6125KAA 968999189 / ZTH6123KOLA 968999224 / ZTH6127KOB 968999225 / ZTH7227KOB For Serial No. 033600000 & Higher MANUAL 539109201 REV. 01 (09/15/04)

More information

CLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX

CLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A

More information

Headstock Gear System

Headstock Gear System Headstock Gear System (0000 Series Parts) 10 7 6 5 4 3, 2 16 11 12 13 14 15 9,8 1 90 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 91 93 94 95 96 97 98 99 100 102 104 106 108 109 92 101 103 105

More information

Front axle components, overview

Front axle components, overview j a t Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved, or

More information

EXPLODED PARTS LIST VSS 60

EXPLODED PARTS LIST VSS 60 Page(s): / ENGINE Page(s): / No Code Name Qty No Code Name Qty 05083 Handle assembly 05076 Connecting rod 3 Box Hex locking nut M8 7 5 Washer 8xx 6 Hex locking nut M6 7 T bolot M8x 8 Pin with hole 9 0506

More information

PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V

PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL

More information

F - 4u Corsair (50cc)

F - 4u Corsair (50cc) F - u Corsair (50cc) Specification: Length: 73(.3") Wing span: 0mm(5") Wing area: 7.00sq.dm(9.39sq.ft) Wing loading: 35.g/sq.dm(.5oz/sq.ft) Flying weight:.kg(.0lbs) Radio: ch & 0servos Engine: 50cc gasoline

More information

MXS R 30CC. Item No:L G Specifications. 67 1/2"(1720mm) (2C) (4C) 26 35cc gas DLE 30/35RA MLD35 JC30Evo.

MXS R 30CC. Item No:L G Specifications. 67 1/2(1720mm) (2C) (4C) 26 35cc gas DLE 30/35RA MLD35 JC30Evo. MXS R 30CC Item No:L G030008 Specifications Wing Span Length Wing Area Flying Weight Glow Gasoline Electric Radio Description Covering Material Carbon Fibre : 75"(1915mm) 67 1/2"(1720mm) 1023sq in(66sq

More information

Parts Manual Ram Ultra 52, 25 KOH / Ram Ultra 61, 25 KOH / Ram Ultra 72, 27 KOH / Ram Ultra 52, 25 KOH BF /

Parts Manual Ram Ultra 52, 25 KOH / Ram Ultra 61, 25 KOH / Ram Ultra 72, 27 KOH / Ram Ultra 52, 25 KOH BF / Parts Manual Ram Ultra 52, 25 KOH / 998501 Ram Ultra 1, 25 KOH / 9985401 Ram Ultra 72, 27 KOH / 98999724 Ram Ultra 52, 25 KOH BF / 998502 Ram Ultra 1, 25 KOH BF / 9985402 Ram Ultra 72, 27 KOH BF / 9899977

More information

Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration.

Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration. Is Your Product Registered? Contact your Dealer to verify. Warranties are based on Registrations and reduced to 1 year without Registration. PARTS LIST B30L TURBO CONTENTS 1. MAIN BODY...1 ~ 2 2. GEARCASE...3

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 2 - PRO21SCH 12 - LM21 1 - LM21S 1 - LM21SW 1 - LM21S 11 - PRO21SCH 0 - LM21SW - LM21S - LM21SW 5 - LM21S - LM21SW 0700 /0 Printed in USA THE MANUAL Before you

More information

DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #

DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part # DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6

More information

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * * -I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()

More information

Chapter 20. Standard Practices - Airframe

Chapter 20. Standard Practices - Airframe Chapter 20 Standard Practices - Airframe PAGE 1 Chapter 20 Table of Contents Chapter Title 20-00-00 GENERAL.................................. 3 20-10-00 STANDARD PRACTICES AIRFRAME........... 4 20-10-01

More information

12. Mechanical Drawings & Parts Breakdown List

12. Mechanical Drawings & Parts Breakdown List 12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.

More information

Extra 330LT CC. 2 Colour schemes H-G120001A ORACOVER FERRARI RED # ORACOVER WITH # ORACOVER BLACK # ORACOVER SILVER #

Extra 330LT CC. 2 Colour schemes H-G120001A ORACOVER FERRARI RED # ORACOVER WITH # ORACOVER BLACK # ORACOVER SILVER # Extra 330LT 85-125CC Item No:A-G120001 Specs: WING SPAN: LENGTH: WING AREA: FLYING WEIGHT: ENGINE: RADIO: Description Covering Material Carbon Fibre: 111 (2833mm) 100" (2530mm) 2139sq in (138sq dm) 25.3-28lbs

More information

FUSELAGE CONSTRUCTION

FUSELAGE CONSTRUCTION FUSELAGE CONSTRUCTION Note: prior to building and gluing on the work surface use protective covering on your building surface. (wax paper or clear wrap) Fit the laser cut Fuselage Front and Fuselage Rear

More information

TRAILER MOUNTED PUMP MODEL B70 ILLUSTRATED PART MANUAL

TRAILER MOUNTED PUMP MODEL B70 ILLUSTRATED PART MANUAL TRAILER MOUNTED PUMP MODEL ILLUSTRATED PART MANUAL GROUP 00 FIGURE 00 PAGE 01 REED TRAILER MOUNTED CONCRETE PUMP 05 MODEL B50 ILLUSTRATED MANUAL CONTAINS THE FOLLOWING GROUPS AND FIGURES: GROUP 00 HOW

More information

REAR FUSELAGE ASSEMBLY

REAR FUSELAGE ASSEMBLY SECTION 5 Tail Attachments on Fuselage Ref Dwg 8RU-3 The rudder hinge line (HL) is parallel to the aft edge of the fuselage skin SECTION 5 - Page 1 of 9 Looking at the top of the rear fuselage. Stabilizer

More information

SERVICE BULLETIN. No. SB-AG-45 Rev. B JUNE 1, 2007 FIN SPAR & ATTACH FITTINGS INSPECTION AND UPGRADE IMPORTANT:

SERVICE BULLETIN. No. SB-AG-45 Rev. B JUNE 1, 2007 FIN SPAR & ATTACH FITTINGS INSPECTION AND UPGRADE IMPORTANT: THRUSH AIRCRAFT, INC. P.O. Box 3149 300 Old Pretoria Rd. Albany, GA 31706-3149 Product Support 229-883-1440 ext. 341 FAX 229-436-4856 jbays@thrushaircraft.com SERVICE BULLETIN No. SB-AG-45 Rev. B JUNE

More information

ELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service:

ELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service: ELSTON Gopher Getters Parts List for GA-00 and GA-00 Another Quality Product of: Please Contact Us for Parts and Service: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8

More information

Parts Manual SPEEDZTR 44 / SPEEDZTR 46 / SPEEDZTR 54 / SPEEDZTR 36 / SPEEDZTR 44 / SPEEDZTR 48 /

Parts Manual SPEEDZTR 44 / SPEEDZTR 46 / SPEEDZTR 54 / SPEEDZTR 36 / SPEEDZTR 44 / SPEEDZTR 48 / Parts Manual SPEEDZTR / 6501 SPEEDZTR 6 / 65001 SPEEDZTR 5 / 651 SPEEDZTR 36 / 6501 SPEEDZTR / 65301 SPEEDZTR / 6501 Please read the operator s manual carefully and make sure you understand the instructions

More information

12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0.

12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0. D-AHT REV REVISION HISTORY REV. DATE APPROVED Part Number DRG Title of Project Scale Not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken Title of

More information