Fitter Mechanical- Life Sciences-LFS/Q0213 (Life Sciences)
|
|
- Cory Jefferson
- 5 years ago
- Views:
Transcription
1 Fitter -LFS/Q0213 (Life ) 1. Minimum qualification for Trainers Sector Job Role / Trade Life Science Fitter Mechanical- Life QP code Minimum qualification of Trainers Minimum years of experience LFS/Q th 2 Remarks/ Brief Description of the Desired Trainer Profile Trainers are selected by LSSSDC after initially screening of TP nominees, before they undergo the TTT.Preferably Minimum Four (4) years experience mechanical maintenance occupation prefrebely in life sciences (Pharmaceutical/ Bio-pharmaceutical) sector for non-trained and non-qualified talent; Or Minimum Two (2) years experience with Fitter Level-3 qualified Life Science Fitter Mechanical- Life LFS/Q0213 ITI 2 Trainers are selected by LSSSDC after initially screening of TP nominees, before they undergo the TTT.Preferably Minimum Four (4) years experience mechanical maintenance occupation prefrebely in life sciences (Pharmaceutical/ Bio-pharmaceutical) sector for non-trained and non-qualified talent; Or Minimum Two (2) years experience with Fitter Level-3 qualified 2. Minimum required Class room & Lab Size ( in sqft) Sector Job Role / Trade Fitter Life Science QP code LFS/Q0213 NSQF Job role type Lab Size Remark exception Class room Size level 3 Manufacturing 300 Sq ft 300 qft SUNAINA SAMRIDDHI FOUNDATION Page 1
2 Fitter -LFS/Q0213 (Life ) 3. Minimum Qualification of Trainees 12 th 4. Prescribed Duration of the training & common norms category Theory Practical Additional Duration: Entreprene urship and Softskills Additional Duration: Digital Literacy - Not to be counted in total hours - trainee will undergo this on his/her own via online - available in English and Regional Languages at indiaskilsonline.com 5. Tools & Equipment required in Lab Training Duration (excluding Digital Literacy) Content Available Comm on Norms Categ ory ClassificationA: Regular Class& lab C: High Capex Training involving Hi capex Manufac turing / Service Yes I C At site Manufac turing Technical / Non- Technical Industry visit/ojt - Not applicable (NA) Technical 100 SSC QPCode Name of the QP NSQF Level Equipment Name 3 ABC Type Fire Extinguisher Minimum number of Equipment required (per batch of 30 trainees) Unit Type Is this a mandatory Equipment to be available at the Training Center (Yes/No) Dimension/Specificati on/description of the Equipment/ ANY OTHER REMARK SUNAINA SAMRIDDHI FOUNDATION Page 2
3 Fitter -LFS/Q0213 (Life ) Tools: Bolts Tools: Cap Screws Tools: External Circlips Tools: Internal Circlips Tools: Nuts SUNAINA SAMRIDDHI FOUNDATION Page 3
4 Fitter -LFS/Q0213 (Life ) Tools: Nuts, Bolts, Machine Screws, Cap Screws ; External Circlips, Internal Circlips, Special Clips;Tab Washers, Locking Nuts, Wire Locks, Shimming And Packing Tools:Foiler Tools:Hammer Tools:Locking Nuts 10 Yes Unit= Pc 10 Yes Unit= Pc Tools:Machine Screws SUNAINA SAMRIDDHI FOUNDATION Page 4
5 Fitter -LFS/Q0213 (Life ) Tools:Plier Tools:Shimming And Packing Tools:Special Clips 10 Yes Unit= Pc Tools:Tab Washers Tools:Wire Locks 3 Chemical Absorbent Roll 3 Computer (including Monitor, CPU, Keyboard, typewriter, UPS) 3 Computer Workdesk with Internet connectivity through LAN/ Wifi SUNAINA SAMRIDDHI FOUNDATION Page 5
6 Fitter -LFS/Q0213 (Life ) 3 Conventional Lathe Machine 3 Conventional Milling Machine 3 Drilling Machine: Pedestal Drilling Machine 3 Drilling Machine: Portable 3 Eye Washer With Sprinkler 3 Face Mask (Full Face) 3 Face Mask (Half Face) 3 Flexible Shaft Grinding Machine 3 Flexible Shaft Grinding Machine 1 Yes 1 Yes 2 No 4 Yes 4 each type 4 Yes 4 each type 4 Yes minimum two each SUNAINA SAMRIDDHI FOUNDATION Page 6
7 Fitter -LFS/Q0213 (Life ) 3 Flip Charts 3 Forklift 1 No 3 Generator 1 Yes 1.25 time to the capacity of total consumption of the lab equipments 3 Geometric 1 Yes Dimensioning Tool 3 Gloves({Heat, Acid, Chemical} Resitant) Unit= Box; 2 box 3 Gloves(Nitrile) Unit= Box; 2 box 3 GMP Guideline Book 3 Grinding Machine: Ag4 Grinder Unit= Pc 3 Gum Boots 1 Yes SUNAINA SAMRIDDHI FOUNDATION Page 7
8 Fitter -LFS/Q0213 (Life ) 3 Helmet 30 Yes One for each student 3 Lab Coat 30 Yes One for each student 3 Laser Pointer 1 No 35 Sq Ft preferred 3 Manual Bottle Eye Washer Permanent Markers Protractor Punches Scribers SUNAINA SAMRIDDHI FOUNDATION Page 8
9 Fitter -LFS/Q0213 (Life ) Scribers, Punches, Scribing Blocks, Squares, Protractor, Permanent Markers Scribing Blocks Squares 3 Material Safety Data Sheet 3 Measuring Equipments : External Micrometers 3 Measuring Equipments : Vernier/Digital/Dial Caliper 1 Yes For all materials & solvents in Lab 3 MS Office Version 2007 or above (including Ms. Word, Ms Excel, Ms Powerpoint, Ms SUNAINA SAMRIDDHI FOUNDATION Page 9
10 Fitter -LFS/Q0213 (Life ) Outlook) 3 Projector 1 Yes any make (DLP or LCD) Projector 3 Pvc Apron 3 Safety Goggles 30 Yes One for each student 3 Safety Shoes 4 Yes 3 Sample Job Card 1 Yes Unit= Pc 3 Sample Log Books 1 Yes Unit= Pc 3 Sample Machine Histrory Record 3 Sample Machine Inspection Record 1 Yes Unit= Pc 1 Yes Unit= Pc SUNAINA SAMRIDDHI FOUNDATION Page 10
11 Fitter -LFS/Q0213 (Life ) 3 Sample Maintenance Schedule 3 Sample Shift Schedule 3 Self Contained Breathing Apparatus 3 Sound System With Mike Equipment ;Bore Equipment ;Depth Micrometers 1 Yes Unit= Pc 1 Yes Unit= Pc 1 No Equipment ;Depth Verniers Equipment ;Feeler Equipment ;Height Gauge SUNAINA SAMRIDDHI FOUNDATION Page 11
12 Fitter -LFS/Q0213 (Life ) Equipment ;Hole Equipment ;Profile Equipment ;Protractors Equipment ;Radius Equipment ;Rules Equipment ;Slip Equipment ;Thread Equipment ;Try Squares 3 Tolerancing Tool 1 Yes SUNAINA SAMRIDDHI FOUNDATION Page 12
13 Fitter -LFS/Q0213 (Life ) 3 Trolly 3 Various Mask Cartridges 3 Vice Mounted Tables 4 Yes one each type 10 Yes ( 6Ft X 2.5Ft X 3Ft(H)) Bench Vices -5 No., Pipe Vices- 5No. 3 White Board 1 Yes 35 Sq Ft Preferred 3 White Board Duster 3 White Board Marker 1 Yes Any Any Color 3 White Screen 1 No 35 Sq Ft preferred (*Tool / Equipment marked not mandatory are optional) SUNAINA SAMRIDDHI FOUNDATION Page 13
Fitter Mechanical- Life Sciences-LFS/Q0213 (Life Sciences)
Mechanical- s- (s) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Mechanical- s Mechanical- s Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required
More informationFitter Mechanical Assembly- CSC/Q0304 (Capital Goods)
- ( ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationCNC Operator Turning- CSC/Q0115 (Capital Goods)
- ( ) 1. Minimum qualification for Trainers Sector QP code Job Role / Trade Minimum qualification of Trainers Diploma B.E. B.Tech Minimum Remarks/ Brief Description of the Desired Trainer Profile years
More informationModel Curriculum SECTOR: LIFE
Model Curriculum Fitter Mechanical Life Sciences SECTOR: LIFE SUB-SECTOR: PHARMACEUTICAL AND BIOPHARMACEUTICAL OCCUPATION: MANUFACTURING REF ID: LFS/Q 0213, Ver1.0 NSQF LEVEL: Level 3 SCIENCES Fitter Mechanical
More informationCast and diamonds-set jewellery - CAD Operator-G&J/Q2303 (Gems and Jewellery)
Cast and diamonds-set jewellery - CAD Operator- (Gems and ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In
More informationFitter Fabrication- CSC/Q0303 (Capital Goods)
1. Minimum qualification for Trainers - ( ) Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationCast and diamonds-set jewellery - Hand Sketch Designer (Basic)-G&J/Q2301 (Gems and Jewellery)
Cast and diamonds-set jewellery - - (Gems and ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required
More informationJam Jelly & Ketchup Processing Technician-FIC/Q0103 (Food Processing)
- ( ) 1. Minimum qualification for Trainers Sector Job Role / Trade QP code Minimum qualification Minimum years of experience Remarks/ Brief Description of the Desired Trainer Profile of Trainers B.Sc.
More informationJam Jelly & Ketchup Processing Technician-FIC/Q0103 (Food Processing)
- ( ) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationSewing Machine Operator - knits- AMH/Q0305 (Apparel)
- (Apparel) 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationSelf Employed Tailor - AMH/Q1947- (Apparel)
1. Minimum qualification for Trainers - - (Apparel) Sector QP code Job Role / Trade Minimum qualification of Trainers Minimum years of experience Remarks/ Brief Description of the Desired Trainer Profile
More informationModel Curriculum. Fitter-Mechanical Assembly
Model Curriculum Fitter-Mechanical Assembly SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS TOOLS DIES AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationFitter-Mechanical Assembly
Model Curriculum Fitter-Mechanical Assembly Fitter-Mechanical Assembly SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Tools Dies and Press tools Plastics Manufacturing Machinery
More informationGeneral machining, fitting and assembly applications
Unit 065 General machining, fitting and assembly Level: 2 Credit value: 12 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationModel Curriculum. Lathe Operator SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE NON FORMAL AUTO COMPONENTS/AGGREGAT ASC/Q1901, V1.
Model Curriculum SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE NON FORMAL AUTO COMPONENTS/AGGREGAT ASC/Q1901, V1.0 4 TES REPAIR TABLE OF CONTENTS 1. Curriculum 2. Trainer Prerequisites
More informationGeneral Machining, Fitting and Assembly Applications A/508/5164
Unit Title Ofqual unit reference number (code) Organisation Reference General Machining, Fitting and Assembly Applications A/508/5164 QU051773 Unit Level Level 2 Unit Sub Level None GLH 55 Unit Credit
More informationMACHINIST (3 Month Course) Revised May, 2009
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationOPERATOR CONVENTIONAL TURNING
Model Curriculum OPERATOR CONVENTIONAL TURNING Operator-Conventional Turning SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Tools Dies and Press tools Plastics Manufacturing
More informationModel Curriculum. Grinder-Hand and hand held Power Tools SECTOR: SUB-SECTOR:
Model Curriculum Grinder-Hand and hand held Power Tools Grinder-Hand and hand held Power Tools SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Dies, Moulds and Press Tools
More informationName: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
More informationTECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR FOR MACHINIST (6 Months Course) Revised May, 009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96H, GULBERGII, LAHORE
More informationModel Curriculum. Machining Technician/CNC Operator L4 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
Model Curriculum Machining Technician/CNC Operator L4 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: AUTOMOTIVE MANUFACTURING MACHINING ASC/Q3503 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationModel Curriculum CNC OPERATOR TURNING SECTOR: SUB-SECTOR:
Model Curriculum CNC OPERATOR TURNING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS DIES, MOULDS AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEMS & JEWELLERY IMITATION JEWELLERY CASTING G&J/Q1301, V1.0 3 TABLE OF CONTENTS Curriculum Trainer Prerequisites 01 05 3. Annexure:
More informationModel Curriculum. Fitter-Fabrication SECTOR: SUB-SECTOR:
Model Curriculum Fitter-Fabrication SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CGSC MACHINE TOOLS DIES, MOULDS AND PRESS TOOLS PLASTICS MANUFACTURING MACHINERY TEXTILE MANUFACTURING MACHINERY
More informationManufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationCourse Name. List of Experiments/Exercises:
Course code Course Name L-T-P- Credits Year of Introduction ME334 MANUFACTURING TECHNOLOGY LABORATORY II Prerequisite: ME3 Metrology and Instrumentation 0-0-3-06 Course Objectives: To provide programming
More informationModel Curriculum. Irrigation Service Technician
Model Curriculum Irrigation Service Technician TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites 09 3. Annexure: Assessment Criteria 10 Irrigation Service Technician CURRICULUM / SYLLABUS This
More informationDraughtsman-Mechanical
Model Curriculum Draughtsman-Mechanical Draughtsman-Mechanical SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Dies,Moulds and Press tools Plastics Manufacturing Machinery
More informationSafety Hazards Material Processing Laboratory Room 232
Safety Hazards Material Processing Laboratory Room 232 HAZARD: Rotating Equipment / Machine Tools Be aware of pinch points and possible entanglement Personal Protective Equipment: Safety Goggles; Standing
More informationThe National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National
More informationPennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationProducing components using hand fitting techniques
Unit 005 Producing components using hand fitting techniques Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required
More informationMODEL CURRICULUM. Stone Fixer- Imitation Jewellery SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL
MODEL CURRICULUM Stone Fixer- Imitation Jewellery SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEMS & JEWELLERY IMITATION JEWELLERY STONE FIXING G&J/Q1504, V1.0 3 TABLE OF CONTENTS Curriculum Trainer
More informationModel Curriculum. Engraving Artisan
Model Curriculum SECTOR: HANDICRAFTS AND CARPET SUB-SECTOR: Handicrafts (Bamboo Handicrafts) OCCUPATION: REF ID: HCS/Q 2902, V1.0 NSQF LEVEL: 4 TABLE OF CONTENTS 1. Curriculum 01 2. Trainer Prerequisites
More informationNATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 ENGINEERING TECHNOLOGY This marking guideline consists of 8 pages. MARKING GUIDELINE -2- NC930(E)(M17)V QUESTION
More informationModel Curriculum. Carpenter Wooden Furniture FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4
Model Curriculum Carpenter Wooden Furniture SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: FURNITURE & FITTINGS WOODEN FURNITURE CARPENTRY FFS/ Q0102, VERSION 1.0 4 TABLE OF CONTENTS 1. Curriculum
More informationTrade of Toolmaking Module 1: Induction & Bench Fitting Unit 6: Filing Internal & External Radii Phase 2
Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 6: Filing Internal & External Radii Phase 2 Published by SOLAS 2014 Unit 6 1 Table of Contents Document Release History... 3 Unit Objective...
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationModel Curriculum. Hand Crochet Lace Maker HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3
Model Curriculum Hand Crochet Lace Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: HANDICRAFTS AND CARPET HAND CROCHETED TEXTILES CROCHET LACE MAKER HCS/Q7703, V1.0 3 Hand Crochet Lace Maker
More informationTOOL, JIG AND DIE MAKER
MERSETA - TRAINING SCHEDULE PAGE 1 TRADE: TOOL, JIG AND DIE MAKER INDUCTION ID1 Recall applicable sections of the Manpower Training Act (No 56, 1981) with special reference to discipline and legal responsibilities.
More informationMODEL CURRICULUM SECTOR: SUB-SECTOR:
MODEL CURRICULUM Tarakasi Jeweller SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GEM & JEWELLERY Handmade Gold and Gems-Set Jewellery, Silversmithing Component making/filing/assembling G&J/Q9202,
More informationCHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS E CH-65
CHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS 18068-53E CH-65 Updated: January 2016 SCOPE OF RATING GENERAL INFORMATION MACHINERY REPAIR APPRENTICE FABRICATIONS AND MANUFACTURING MACHINE OPERATIONS PRE-MANUFACTURING
More informationMetal and Engineering
2007 HIGHER SCHOOL CERTIFICATE EXAMINATION Metal and Engineering Total marks 80 General Instructions Reading time 5 minutes Working time 2 hours Write using black or blue pen Board-approved calculators
More informationSEMPEO SQA Unit Code FP27 04 Producing components using hand fitting techniques
Producing components using hand fitting techniques Overview This standard covers a broad range of basic hand fitting competences that will prepare you for entry into the engineering or manufacturing sectors,
More informationModel Curriculum KNITING MACHINE OPERATOR - WARP KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: TEXTILE KNITTING KNITTING TSC/ Q4103 4
Model Curriculum KNITING MACHINE OPERATOR - WARP KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: TEXTILE KNITTING KNITTING TSC/ Q4103 4 Certificate CURRICULUM COMPLIANCE TO QUALIFICATION
More informationModel Curriculum KNITTING MACHINE OPERATOR CIRCULAR KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL:
Model Curriculum KNITTING MACHINE OPERATOR CIRCULAR KNITTING SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: TEXTILE KNITTING KNITTING TSC/Q 4101, Version 1.0 4 Certificate CURRICULUM COMPLIANCE TO
More informationHAND SHEARS NO. 12 AND NO. 24
OPERATOR S MANUAL & INSTRUCTIONS HAND SHEARS NO. AND NO. Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 7 Progress Street N.E. Canton, Ohio 70 0--9 0--00 (fax) Revised 0/0 Sale or distribution of manuals
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO Sault College COURSE OUTLINE COURSE TITLE: Machine Shop Practical CODE NO. : MCH144 SEMESTER: 1 PROGRAM: AUTHOR: Mechanical Techniques
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationModel Curriculum. Fitter-Electrical and Electronic Assembly SECTOR: SUB-SECTOR:
Model Curriculum Fitter-Electrical and Electronic Assembly Fitter-Electrical and Electronic Assembly SECTOR: SUB-SECTOR: OCCUPATION: REFERENCE ID: NSQF LEVEL: CGSC Machine Tools Plastics Manufacturing
More informationCURRICULUM ASSESSMENT CHECKLIST
CURRICULUM ASSESSMENT CHECKLIST Industrial Mechanic (Millwright) Level 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trades of Industrial
More informationWASSCE / WAEC METALWORK SYLLABUS
WASSCE / WAEC METALWORK SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. 1. PREAMBLE The
More informationMODEL CURRICULUM. Jewellery Frame Maker GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0610, V1.
MODEL CURRICULUM SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0610, V1.0 4 TABLE OF CONTENTS 1. Curriculum 01
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationEvaluation Instructions Machining Level II Milling: Precision Locations
Evaluation Instructions Machining Level II Milling: Precision Locations General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the
More informationEvaluation Instructions Machining Level II CNC Milling
Evaluation Instructions Machining Level II CNC Milling General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the criteria for performance
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationSAQCC FIRE D&GS TRAINING SUB COMMITTEE TYPICAL COURSE CURRICULUM LAYOUT
SAQCC FIRE D&GS TRAINING SUB COMMITTEE TYPICAL COURSE CURRICULUM LAYOUT This form allows one to provide a curriculum for a training course in a standard format. COURSE SAFETY, WORKSHOP PRACTICE HAND TOOLS
More informationMODEL CURRICULUM. Jewellery Component Maker GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0608, V1.
MODEL CURRICULUM Jewellery Component Maker SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL GEM & JEWELLERY HANDMADE GOLD AND GEMS-SET JEWELLERY, SILVERSMITHING GOLDSMITH G&J/Q0608, V1.0 3 Jewellery
More informationAir Cooled Engine Technology. Roth 9 th Ch 2 Tools & Measuring Pages 21 43
Roth 9 th Ch 2 Tools & Measuring Pages 21 43 1. A combination wrench has one end and one end. Box & Open Square & Round Ratcheting & Gear 2. A or flare nut wrench is used on metal tubing connection fittings.
More informationINSTALLATION MANUAL IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA MANUAL PART NUMBER:
PARTS-1 Model 24562/28562 Crane INSTALLATION MANUAL IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NUMBER: 99903701 Iowa Mold Tooling Co., Inc. is an Oshkosh Truck
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationTrade of Toolmaking Module 1: Induction & Bench Fitting Unit 8 Recessing and Assembling Parts Phase 2
Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 8 Recessing and Assembling Parts Phase 2 Published by SOLAS 2014 Unit 8 1 Table of Contents Document Release History... 3 Unit Objective...
More informationModel Curriculum. Assistant Shuttering Carpenter (NSQF Level 2) SECTOR: SUB-SECTOR:
Model Curriculum Assistant Shuttering Carpenter (NSQF Level 2) SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CONSTRUCTION REAL ESTATE AND INFRASTRUCTURE CONSTRUCTION SHUTTERING CARPENTER CON/Q0302,
More informationMachine Drawing MEC-304. Dr. Shankar Sehgal Asst. Professor in Mech. Engg. UIET, Panjab University, Chandigarh
Machine Drawing MEC-304 Dr. Shankar Sehgal Asst. Professor in Mech. Engg. UIET, Panjab University, Chandigarh Standard Abbreviations Standard Abbreviations Standard Abbreviations Standard Abbreviations
More informationModel Curriculum. 1. Sewing Machine Operator- Knits APPAREL, MADE-UPS AND HOME FURNISHING APPAREL STITCHING AMH/Q0305 4
Model Curriculum 1. Sewing Machine Operator- Knits SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: APPAREL, MADE-UPS AND HOME FURNISHING APPAREL STITCHING AMH/Q0305 4 Certificate CURRICULUM COMPLIANCE
More informationOur clients success is our genuine concern
Our clients success is our genuine concern Overview M/S SEINEN is an associate company of Dawood Engineering. It was established in Year 2006, with an aim to provide customers with comprehensive engineering
More informationSEMPEO SQA Unit Code FP2C 04 Installing aircraft mechanical fasteners
Overview This standard covers a broad range of basic competences you need to install aircraft mechanical fasteners which will prepare you for entry into the engineering or manufacturing sectors, creating
More informationBy C.W. Woodson From the pages of Model Craftsman magazine June, 1937
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationModule Resource Manual. Marking Out Techniques MEC078 SAMPLE
Module Resource Manual Marking Out Techniques MEC078 This 1 st edition published in November 2002 by Manufacturing and Engineering Division NSW TAFE Commission PO Box 218 Bankstown NSW 2200 This work is
More informationSTATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF DRAFT SYLLABUS
STATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF 2017 - DRAFT SYLLABUS Subject :GENERAL MACHINIST - Theory Class : XI TOPIC CONTENT 1. Workshop Engineering Introduction; Machinist; Duties; Role
More informationPreparing and using milling machines
Unit 012 Preparing and using milling machines Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a broad
More informationCNC Lathe Production Technician
Brief Program Description The CNC Lathe Production Technician program is a 9 week online program designed to help students gain the skills and knowledge required for work as entry-level CNC lathe production
More informationC70 Window Roller Repair Taken from: Heres the problem:
C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationHANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT Introduction SECTION 1 Thank you for purchasing one of our fine True Focus products. This manual covers the
More informationRegulated Qualifications Unit and Assessment Specification
Regulated Qualifications Unit and Assessment Specification Unit title Preparing and Using Lathes for Turning Operations Regulator unit R/616/7332 code SQA unit code FT2P 60 SSC ref Unit 76 History of changes
More informationSession: Introduction to PPE and T&P
Session: Introduction to PPE and T&P Learning Objectives Explain what safety PPE, tools and plants are, their purpose and their uses Evaluation Criteria Interactive Questioning Duration Resources Facilitator
More informationSCOPE DOCUMENT DATE OF DISTRIBUTION VIA WEBSITE. No other documents will be produced prior to the competition
SCOPE DOCUMENT Competition Year 2013 Competition location Vancouver, BC Trade Number 91 Trade Name Aircraft Maintenance Level Post- Secondary 1. INTRODUCTION 1.1 Purpose of the Challenge. To assess the
More informationassembly instructions
door opens outwards door opens inwards front cubicle door opens outwards or inwards with side panel seite 1 ensure that the supplied parts are complete by checking the packing list. make sure that tools
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationInstallation Instructions:
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included: Qty 93-326EP009 Front Armor: Drvr 1 93-326EP010 Front Fender: Pass 1 90-6774m Hardware Pack:
More informationAnupriya Ultratech Plot No. W-98(A), MIDC Ambad, Nashik, Maharashtra
Anupriya Ultratech Plot No. W-98(A), MIDC Ambad, Nashik, Maharashtra info@anupriyaultratech.com rakesh.patil@anupriyaultratech.com Company Name : Anupriya Ultratech Entity : Proprietory Year of Establishment
More informationPreparing and using lathes for turning operations
Unit 011 Preparing and using lathes for turning Level: 2 Credit value: 15 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover a
More informationBio-Sand Filtration Mould Construction Guidelines
Bio-Sand Filtration Mould Construction Guidelines Adriaan Mol & Eric Fewster BioSandFilter.org December 19, 2007 Introduction On the following pages, you will find an illustrated construction guide that
More informationThe National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The
More informationINTRODUCTION. A space, room or building in which goods are manufactured or repaired is know as workshop.
INTRODUCTION A space, room or building in which goods are manufactured or repaired is know as workshop. A workshop may also be defined as a room or building which provides both the area and tools (or machinery
More informationIC LEARNING SERIES. Marking Out, Measurement, Fitting & Assembly
IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly The Hong Kong Polytechnic University Industrial Centre IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly Suitable for the following
More informationLand Rover Defender 90/110/ th Anniversary Style Front Cage Fitting Instructions
Land Rover Defender 90/110/130 60 th Anniversary Style Front Cage Fitting Instructions Cambridge House Unwrap the roll cage and unpack the individual fitting kits. At this point it is recommended that
More informationA-PDF Split DEMO : Purchase from to remove the watermark SHAFT DRIVE
SHAFT DRIVE 4-1 A-PDF Split DEMO : Purchase from www.a-pdf.com to remove the watermark SHAFT DRIVE CONTENTS SECONDARY BEVEL GEARS... 4-2 CONSTRUCTION... 4-2 REMOVAL... 4-4 DISASSEMBLY... 4-4 INSPECTION...
More informationModel Curriculum. 1. ShutteriŶg CarpeŶter- Systeŵ. Construction Real Estate and Infrastructure Construction SHUTTERING CARPENTRY CON/Q0304, V1.
Model Curriculum 1. ShutteriŶg CarpeŶter- Systeŵ SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Construction Real Estate and Infrastructure Construction SHUTTERING CARPENTRY CON/Q0304, V1.0 4 1 2
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More information