FES SUBSEA HOT STAB. FES Subsea Merchant Court, Ashington, Northumberland, England, NE63 0YH
|
|
- Calvin Gray
- 6 years ago
- Views:
Transcription
1 FES SUBSEA HOT STAB Flexible Engineered Solutions have built up a reputation for satisfying clients with a range of standard & bespoke ROV operable Hot Stab Connectors for use in fluid transfer systems by means of high quality and cost effective design, manufacture and short lead times. Design of hot stabs, ranging from 1 to 8. Designed in accordance with API17D, API 6A, API RP2A, ASME VIII div II, ASME B31.3, ASME B31.8, ISO , ISO 10423, PD5500, and PED. Other specifications are available on request. FES Subsea HOT STAB Connector Range qualified, and 3rd party certified, to API 6A / ISO PR2 Annex F & API 17D / ISO Annex L. All sizes and ratings available as pressure retaining BLIND STABS. Suitable for subsea pigging, chemical or gas injections and flood and vent operations. Hydraulically operated hot stab available for 4 and above, which eliminates the requirement for the ROV or Diver to provide the insertion & retraction forces. Working in accordance with the requirements of ISO 9001 quality standard. In-house design, assembly and testing ensure all test procedures and inspection & testing plans are strictly adhered to. ROV subsea and/or diver operable and suitable for use in water depths up to 3000m. One piece construction. Low maintenance. Mechanical locks with FES RECEPTACLES to prevent unwanted disengagement. Single operation engagement/disengagement; Double seal system and choice of seal types and materials. Hydrostatic and hyperbaric testing program. Offered in a range of subsea suitable materials. These include 316L Stainless Steel (UNS 31603), Duplex F51 (UNS S31803), Super Duplex F55 (UNS S32760) and Inconel 625 (UNS N06625). Available in a range of outlet connections including Autoclave, BSP, Female Hammer Lug Union, Flanged, NPT and Weld Prep. FES Subsea subsea@fesltd.co.uk Web:
2 FES SUBSEA HOT STAB FES Hot Stabs can be supplied in a variety of handles to suit an array of ROV manipulator tools. The most popular handles are shown below and project specific variations are available on request. Circular D-Type Fish-Tail T-Bar (Large Stabs Only) FES also offer a range of non-pressure retaining DEBRIS STABS. These stabs can serve as an alternative to a BLIND STAB and will prevent debris ingress and marine growth in FES RECEPTACLES. They are mainly installed during deployment or long-term subsea storage. Available to fit any FES RECEPTACLE. Manufactured from lightweight materials. Easily installed. Suitable for long-term deployment. Available with a range of handle options including D-Type, Fish-Tail and T-Bar. Although FES Hot STABS are very robust and require little maintenance, there may be situation where it might be advisable to change the seals. For these situations FES offer a 2 part seal change tool which can be used to fit new seals. We can also supply replacement seal kits in a variety of materials if necessary. Available for all HOT STAB sizes. Easy to use. Re-useable. Short down-times. FES Subsea subsea@fesltd.co.uk Web:
3 FES SUBSEA RECEPTACLE Flexible Engineered Solutions have built up a reputation for satisfying clients with a range of standard & bespoke ROV operable RECEPTACLE Connectors for use in fluid transfer systems by means of high quality and cost effective design, manufacture and short lead times. Design of RECEPTACLES ranging from 1 to 8. Available in both single (SS) and double sided (DS) designs. Can be panel mounted using the removable mounting plates. These plates can be rotated in 45 increments to suit project requirements. Designed in accordance with API17D, API 6A, API RP2A, ASME VIII div II, ASME B31.3, ASME B31.8, ISO , ISO 10423, PD5500, and PED. Other specifications are available on request. FES Subsea RECEPTACLE Connector Range qualified, and 3rd party certified, to API 6A / ISO PR2 Annex F & API 17D / ISO Annex L. Suitable for subsea pigging, chemical or gas injections and flood and vent operations. Working in accordance with the requirements of ISO 9001 quality standard. In-house design, assembly and testing ensure all test procedures and inspection & testing plans are strictly adhered to. ROV subsea and/or diver operable and suitable for use in water depths up to 3000m. Mechanical locks with FES HOTSTABS to prevent unwanted disengagement. Locking J-Slot can be rotated in 45 increments to suit project requirements. Single operation engagement/disengagement; Hydrostatic and hyperbaric testing program. Offered in a range of subsea suitable materials. These include 316L Stainless Steel (UNS 31603), Duplex F51 (UNS S31803), Super Duplex F55 (UNS S32760) and Inconel 625 (UNS N06625). Available in a range of outlet connections including Autoclave, BSP, Flanged, NPT and Weld Prep. Also available with a range of bespoke pipe outlets in both carbon and stainless steels. All welding and NDT can be performed as per project requirements. FES Subsea fes@fesltd.co.uk Web:
4
5
6 FES Subsea Web:
Subsea Chokes and Flow Modules
Subsea Chokes and Flow Modules 2 Relia Designed for maximum flexibility and reliability, FMC s F Series Subsea Chokes and Flow Modules are ideal for production, injection, gas lift and waterflood applications.
More informationControls and Communications Connectors Diamould electrical connectors
Controls and Communications Connectors Diamould electrical connectors APPLICATIONS Subsea production systems controls Connectivity to tree, manifold, choke, and chemical injection metering valve (CIMV)
More informationPipeline Repair Systems
Pipeline Repair Systems Pipeline Repair Systems Subsea Innovation is a world leader in the supply of split sleeve pipeline repair equipment with over 20 systems supplied to major operators around the
More informationCHINA ZHEJIANG ZHONGGONG VALVE GROUP CO,.LTD FORMEN VALVE
INTERNATIONAL SALES: FORMEN VALVE ADD: OUBEI TOWN, YONGJIA COUNTY, WENZHOU, ZHEJIANG, CHINA HEADQUARTER: ZHEJIANG ZHONGGONG VALVE GROUP ADD: WUXING INDUSTRY ZONE, OUBEI TOWN, WENZHOU, CHINA ABOUT US Formen
More informationLocation. Established in 2015 Office location: Klepp Næringspark, Norway.
Location Established in 2015 Office location: Klepp Næringspark, Norway. Vision to be leader within On-Site machining & Decommissioning segment with a main focus on mature plants, offshore installations,
More informationInnovative Subsea Engineering
Innovative Subsea Engineering www.subsea.co.uk Innovative Subsea Engineering Formed in 1985 by a team of experienced engineers and diving professionals, Subsea Innovation is a company dedicated to delivering
More informationTailor Made. Create your unique subsea valve
Tailor Made Create your unique subsea valve Our engineers have developed a comprehensive range of subsea valves, operators and hydraulic actuators to deliver complete tailor made packages meeting the highest
More informationHM Subsea Series. Technical Datasheet. Turbine Flow Meters. for Subsea Immersion Applications
www.kem-kueppers.com Technical Datasheet HM Subsea Series Turbine Flow Meters for Subsea Immersion Applications Certified according to DIN EN ISO 9001 2 HM Subsea Series Turbine Flow Meters Description
More informationPROCHEM INSTRUMENTATION. Product solutions for a world of difference BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES MANUFACTURING
PROCHEM Product solutions for a world of difference PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES HYDRAULIC The World of Prochem PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES
More informationEmergency Pipeline Repair Solutions and Future Contingency Planning
Emergency Pipeline Repair Solutions and Future Contingency Planning SubseaEurope 2010 Espace Grande Arche, Paris 28/10/10 Paul Hughes, Product Manager - Connectors Hydratight Products & Services Part of
More informationTel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
More informationSAMAMAT FLOW CONTROL L.L.C.
SAMAMAT FLOW CONTROL L.L.C. SFC-MK-LS-001 Rev.: 03 COMPANY PROFILE Company Location Company Information Company Size Nearest Transportation Company Name SAMAMAT FLOW CONTROL L.L.C Company Address Plot
More informationPROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:
More informationVIRTUS CONNECTION SYSTEMS Advanced Diverless Connection Solutions for any Subsea Field Application
VIRTUS CONNECTION SYSTEMS Advanced Diverless Connection Solutions for any Subsea Field Application 2 Virtus Subsea Connectors Delivering Long-Lasting Reliability at Each Subsea Connection Subsea production
More informationStormwater Solutions. Jacopa Penstocks. Key Features & Benefits: How We Create Value:
Key Features & Benefits: Suitable for Sewerage systems Suitable for Surface water systems Suitable for the control of Watercourses How We Create Value: Can provide a level of Flow control Provides high
More informationPROCHEM Stainless Steel Specialists
PROCHEM Stainless Steel Specialists Product solutions for a world of difference INSTRUMENTATION BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC PROCHEM
More informationSensorlink Corrosion monitoring on welds. Subsea Controls Down Under ISO 9001:2008 certified IECEx certified
Sensorlink Corrosion monitoring on welds Subsea Controls Down Under 2018 Jan-Tore Ervik, CMO Jan-tore.ervik@sensorlink.no ISO 9001:2008 certified IECEx certified 2 Outline Sensorlink Motivations and applications
More informationU-Series. Subsea Screw Jacks & Bevel Gearboxes
U-Series Subsea Screw Jacks & Bevel Gearboxes The Power Jacks U-Series: strength in depth The U-Series is a new proposition from Power Jacks: a range of subsea products specifically designed to operate
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationSubsea Tooling Services Range of Dredgers
Subsea Tooling Services Range of Dredgers Subsea Tooling Services UK Ltd (STS) has a large selection of ROV / Diver operated dredgers. The range includes 3 4 6 8 10 and 12 dredgers. We are confident we
More informationPENSTOCKS Sluice Gates
Sluice Gates PENSTOCKS ENGINEERED FOR WATER SİSMAT ULUSLARARASI is a well-known penstock supplier, manufacturing high quality, high performance water control gates for all industries as standard designs
More information3 Emergency Breakaway Coupling
SM64227 July 2008 Applicable addition manuals: N/A Aerospace Group Conveyance Systems Division Carter Ground Fueling Maintenance & Repair Manual 3 Emergency Breakaway Coupling Model 64227 Table of Contents
More informationTABLE OF CONTENTS Page
2 American Petroleum Institute TABLE OF CONTENTS Page POLICY................t... 8 FOREWORD......................................................................................................................f...
More informationThe use of Mechanical Connectors throughout Life of Field
The use of Mechanical Connectors throughout Life of Field Andrew Woodward Subsea Sales Engineer andrew.woodward@hydratight.com 1 What I will cover Safety Moment Introduction to Hydratight What are Mechanical
More informationQUALITY INNOVATION RELIABILITY ENGINEERED SIMPLICITY
PEMEX-INTSOK Deepwater Technology Seminar, May 9-10, 2013 UNITECH is QUALITY INNOVATION RELIABILITY ENGINEERED SIMPLICITY Global Reach UNITECH equipment and people support some of the world s most challenging
More informationSubsea Control Systems
Subsea Control Systems Simplifying Subsea Production INGENIOUS SIMPLICITY Proserv s direct hydraulic and multiplexed production subsea control systems provide control and shutdown of subsea wells together
More informationPressurised Subsea Pipeline Repair Recent Case Studies
Despite good pipeline design and integrity management schemes, pipelines can and do get damaged and need to be repaired. Damage can be caused by any number of factors, such as dragged anchors, landslides,
More informationEmergency Pipeline Repair Systems; A Global Overview of Best Practice
Emergency Pipeline Repair Systems; A Global Overview of Best Practice Brief Introduction to EPRS EPRS: Key Challenges Worldwide EPRS: Global Approaches to These Challenges Best Practice Comparison James
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
More informationAPI 6D MV7-F MV7-P GATE VALVE FABRICATED BODY MV7-C GATE VALVES API 6D THROUGH-CONDUIT GATE VALVES THROUGH-CONDUIT GATE VALVE FORGED BODY GATE VALVE
I MV7-F GATE VALVE FORGED BODY MV7-P GATE VALVE FABRICATED BODY MV7-C GATE VALVE CAST BODY DUIT GATE VALVES DBB BALL VALVES CRYOGENIC HIGH MILAN API 6D API 6DSS API 6A API 17D BALL VALVES H TEMPERATURE
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationStandard Horizontal Subsea Trees. Integrated offshore offering for reliable, high-quality, and capitalefficient
Standard Horizontal Subsea Trees Integrated offshore offering for reliable, high-quality, and capitalefficient performance Standard Horizontal Subsea Trees Through standardized processes, common core components,
More informationUmbilicals and Subsea Power Cables Excellence in Connecting Subsea EWEA
Umbilicals and Subsea Power Cables Excellence in Connecting Subsea EWEA Control and Power Umbilicals The control umbilical consists of hydraulic lines used for transfer of chemicals and fluids. In addition,
More informationRaising Performance Together In the Oil & Gas Industry
Raising Performance Together In the Oil & Gas Industry Flanges, Bw Fittings, Valves, Pipes, Gaskets, Studbolts, Isolation Joints, Pig Launcher Receivers. C O M P A N Y P R O F I L E HISTORY NECO GOLD GROUP
More informationYour Partner for Subsea Pumping
Your Partner for Subsea Pumping Our Experience Dedicated to Your Success With the drivers of increased oil recovery and the depletion of traditionally accessible oil fields, the trend in oil and gas is
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More informationCapability Presentation. Subsea Sampling Richard Barr Thursday 8 February
Capability Presentation Subsea Sampling Richard Barr Thursday 8 February Setting the scene The cynics say that we are a cyclical industry that never learns its lessons. Well this time we have an opportunity
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationANDERSON GREENWOOD SAFETY SELECTOR VALVE
A dual pressure relief device system that provides a safe, efficient method of switching from an active PRV to a standby, maintaining system overpressure protection FEATURES GENERAL APPLICATION Safety
More informationUS80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE
TUBE AND PIPE BEVELING MACHINE ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More information100% POSITIVE ISOLATION
100% POSITIVE ISOLATION ONIS Quick-Action Line Blind outperforms conventional blind solution: spectacle, slip and figure-8 blinds 1 up to 52 150# up to 2500# -155 F/-104 C up to 1400 F/760 C Improve Safety
More informationDesign and manufacture of subsea and topside composite cables and connectors
Overview Design and manufacture of subsea and topside composite cables and connectors Hydro Group. sales@hydrogroup.plc.uk www.hydrogroup-asia.com tel: +65 63343566 fax: +65 63343566 1 : 5 Hydro Group
More informationWE CREATE IMPOSSIBLE ABOUT US. KASRAVAND is a DESIGN and MANUFACTURING Company
FIXED EQUIPMENT ABOUT US KASRAVAND is a DESIGN and MANUFACTURING Company with high Engineering and Management competency. We design & manufacture PROCESS PACKAGES such as FLARE GAS RECOVERY,TEG,MEG,WATER
More informationFEST Engineering Ltd. Technical Company for Engineering, Calculation and Design of Energy Facilities
FEST Engineering Ltd. Technical Company for Engineering, Calculation and Design of Energy Facilities ABOUT US In operation since 2005, first as FEST Engineering s.r.o., now FEST Engineering Ltd., was originally
More informationAn Introduction to Grayloc Products! Serving your Piping and Pressure Vessel requirements for over 50 years!
An Introduction to Grayloc Products! Serving your Piping and Pressure Vessel requirements for over 50 years! Grayloc Products An Oceaneering International Company Oceaneering is a global oilfield provider
More informationSubsea Pipeline IMR. PT Hallin Marine June 18 th, 2014!
PT Hallin Marine June 18 th, 2014! Introduction Issues and Risks Inspection, Maintenance & Repair Case Study Conclusions and Recommendations 2 Introduction Subsea Pipeline IMR q Obtain data to assess the
More informationUCON Connection Systems
UCON Connection Systems UCON Connection Systems Subsea fields are developed using a variety of connection system solutions. Over the past two decades, FMC Technologies has manufactured a complete range
More informationMetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
More informationMidsteel Flanges & Fittings Ltd
Company Profile Stockist and Manufacturer s of Pipe, Flanges and Fittings for the Oil, Gas, Petrochemical, Fire Protection and Power Generation Industries. Contents Introduction to Location Stock Range
More informationINTEGRATED SUBSEA PRODUCTION SYSTEMS Efficient Execution and Cost-Effective Technologies Deliver Project Success. Deepsea technologies
INTEGRATED SUBSEA PRODUCTION SYSTEMS Efficient Execution and Cost-Effective Technologies Deliver Project Success Deepsea technologies Streamlining Subsea Production Systems for Smaller Fields AFGlobal
More informationBOLTIGHT HYDRAULIC BOLT TENSIONING TIGHTEN BOLTS SIMULTANEOUSLY TO ENSURE EVEN PRELOAD
BOLTIGHT HYDRAULIC BOLT TENSIONING TIGHTEN BOLTS SIMULTANEOUSLY TO ENSURE EVEN PRELOAD 2 BOLTIGHT I BRAND STORY BEYOND POSSIBLE In the world of heavy industry, where large machines and equipment build
More informationLEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves
LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves OUR Stream-Flo Industries Ltd. is committed to provide premium quality
More informationDeepwater Precommissioning Services
Deepwater Precommissioning Services Featuring Denizen remote subsea technologies Drilling Evaluation Completion Production Intervention Pipeline & specialty services Nitrogen services Pipeline services
More informationWellhead Control Products, Inc. Hangers
Wellhead Control Products, Inc. Hangers The RH series was designed to be a highly workable coiled tubing hanger with greater reliability and more efficiency than other coiled tubing hanger systems. The
More informationVALVES AND PENSTOCKS FOR WATER
VALVES AND PENSTOCKS FOR WATER www.cmo.es Our COMPANY CMO is a company dedicated to the design, manufacture and assembly of standard and special valves and penstocks. Its extensive manufacture range allows
More informationA representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMarine Well Containment Company. Charlie Miller, Chief Technology Officer
Marine Well Containment Company Charlie Miller, Chief Technology Officer January 25, 2012 Agenda Company Overview Interim Containment System Expanded Containment System 2012 Priorities 2 Agenda Company
More informationPRODUCTS AND SERVICES
PRODUCTS AND SERVICES Who we are One Company, Total Support, Complete Solutions Over many years, Hydratight has provided world-class bolted joint solutions and continues to set international standards
More informationSpecialists in process filtration
Vermeer Process specializes in process filtration. As designer, trouble-shooter, manufacturer and supplier we can advise, design and deliver the ideal service or product throughout the course of your projects.
More informationU-Series. Subsea Screw Jacks & Bevel Gearboxes
U-Series Subsea Screw Jacks & Bevel Gearboxes The Power Jacks U-Series: strength in depth The U-Series is a new proposition from Power Jacks: a range of subsea products specifically designed to operate
More informationTHERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED
age 1 of 5 THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED A thermowell is a thermally conductive socket recommended to: rotect the delicate instrument sensing elements against corrosive effects.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13628-8 First edition 2002-12-15 Petroleum and natural gas industries Design and operation of subsea production systems Part 8: Remotely Operated Vehicle (ROV) interfaces on
More informationTYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
More informationNote: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
More informationRepair Manual 12 PL PILOT
Repair Manual 12 PL PILOT 12 PL PILOT REPAIR MANUAL INDEX Introduction... 1 Elastomer Materials... 2 Disassembly... 3 Assembly... 7 Testing... 11 NOTE: We reserve the right to modify or change, without
More informationOil & Gas
The Professional Choice Oil & Gas www.olaer.com 2 Oil & Gas Equipment Olaer is a global player specialising in innovative, efficient system solutions for temperature optimisation and energy storage. All
More informationINTRODUCTION. pb^`lk PHOENIX
pb^`lk PHOENIX INTRODUCTION pb^`lk Phoenix located in Ashaway, Rhode Island is an affiliate of the pb^`lk Group of companies and specializes in the manufacture of glass sealed electrical connectors, feed
More informationOne Team, Two Companies, Unique Strength
One Team, Two Companies, Unique Strength Hydro Group Plc. Who We Are Hydro Group specialises in design and manufacture of subsea and harsh environment electrical and optical cables, connectors, penetrators,
More information1
[Type text] www.upstreamflowsolutions.com 1 Upstream Flow Solutions evolved as a solution focused company targeting only the midstream and upstream sectors of the oil & gas industry from drilling operations
More informationSPECIALISTS
Bending & Rolling SPECIALISTS www.bendtechgroup.com.au Our 200NB x 12mm wall, pipe bender makes us one of the largest, low cost and efficient benders in Australia Over 30 years of market leading bending,
More informationINTRODUCTION. pb^`lk PHOENIX
pb^`lk PHOENIX INTRODUCTION pb^`lk Phoenix located in Ashaway, Rhode Island is an affiliate of the pb^`lk Group of companies and specializes in the manufacture of glass sealed electrical connectors, feed
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationMatt Wilson Global Subsea Business Development Manager
Radioisotope applications - Flow Assurance and Pipelines Ensure the successful and economical flow of the hydrocarbon stream from the reservoir to the point of sale. Subsea 2010 Matt Wilson Global Subsea
More informationThe Recoil Product Range
The Recoil Product Range How a Recoil Insert Works Recoil inserts are rolled from high quality stainless steel wire with a diamond shaped cross section, wound to the shape of a spring thread. Once the
More informationGas Solutions. Perfection Permasert 2.0 Gas Coupling Installation Guide
Gas Solutions Perfection Permasert 2.0 Gas Coupling Installation Guide Permasert 2.0 Mechanical Gas Couplings A B C D E F A B C D Permasert 2.0 Coupling: Molded from PE4710 resin. Meets or exceeds US DOT
More informationWho we are. Established in 2006 with six employees from Bryne Mekaniske. Design Engineering P R O. Project & Production
Who we are Established in 2006 with six employees from Bryne Mekaniske D E P R O Design Engineering Project & Production With the customer in focus, we have had an exceptional growth from startup. Our
More informationAnnexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)
Annexure - V Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material) CONTENTS SL NO. DESCRIPTION 1.0 SCOPE 2.0 REFERENCE DOCUMENTS 3.0 MANUFACTURER'S QUALIFICATION 4.0 MATERIALS
More informationBolt Tightening Solutions Torque and Tension, we ve got got it covered.
Bolt Tightening Solutions Torque and Tension, we ve got got it covered. Bolt Tightening Solutions Tentec are an innovative producer of bolt tightening equipment with a high level of focus on quality and
More informationHow do we stretch the boundaries of oil and gas production?
Maximum Pressure. High Pressure Technology Testing Equipment Hydraulics Pneumatics How do we stretch the boundaries of oil and gas production?» With high pressure equipment and pressure systems up to 25,000
More informationHorizontalBore SUBSEA TREE
HorizontalBore SUBSEA TREE HorizontalBore SUBSEA TREE Dril-Quip s HorizontalBore Tree is a modular design subsea production component that accommodates numerous completion configuration possibilities.
More informationDOLPHIN SHELL & TUBE MARINE CONDENSERS (DSTMC)
PIOEER I HEAT TRASFER TECHOLOGY DOLPHI SHELL & TUBE MARIE CODESERS (DSTMC) Dolphin Shell & Tube Marine Condenser (DSTMC) General Information Dolphin carries out Thermal Design, Mechanical Design & detailed
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationStandard Subsea Wellheads. Integrated offshore offering for reliable, high-quality, and capital-efficient performance
Standard Subsea Wellheads Integrated offshore offering for reliable, high-quality, and capital-efficient performance Standard Subsea Wellheads Through standardized processes, common core components, and
More informationkyfor Your Utility Heating and Cooling
. kyfor Your Utility Heating and Cooling ky M-Series Plate Heat Exchangers Applications For your utility heating and cooling duties the industrial plate heat exchangers of Alfa Laval can be used. These
More informationENGINEERING INNOVATION
ENGINEERING INNOVATION ENGINEERING INNOVATION Viper Subsea provides control system distribution solutions for the global subsea oil and gas industry. Our product and service offering covers the full life
More informationCertifications and Licenses
Company OMPA is a qualified Oilfield Machine Shop with over 40 years experience in Manufacturing of Custom Designed Equipment, Threading Service and Precision Machining Service. It operates on a total
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More information3 POINT HITCH LOGSPLITTER
3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER
More informationPilot Installation of Retrofit Gas Lift System Brae Bravo UK North Sea
36 th Gas-Lift Workshop Stavanger, Norway February 4 8, 2013 Retrofit Gas Lift Pilot Installation of Retrofit Gas Lift System Brae Bravo UK North Sea Alun Whittaker Business Development Manager Coiled
More informationSAVVY OFF ROAD GAS TANK SKID INSTALLATION INSTRUCTIONS
It is best to work with a fuel tank that has the least amount of fuel in it as possible. Thank you for purchasing the best skid on the market. Please follow these instructions and your installation should
More informationSymphony II Adaptable Table System
Symphony II Adaptable Table System 1.00 General 1.01 Conditions 1.02 Scope of work 1. This section covers all materials, equipment, tools and labor for the supply and installation of the laboratory Symphony
More informationFLANGE INTEGRITY MANAGEMENT
FLANGE INTEGRITY MANAGEMENT Stork provides integrated machining, bolting & flange management solutions to the Oil & Gas, Subsea, Chemical & Power industries WWW.STORK.COM 1 OUR VALUE DRIVEN APPROACH TO
More informationMARS. Multiple application reinjection system
MARS Multiple application reinjection system Unique Technology. Universal Application. Historically, installing processing hardware on existing subsea trees has been a high-risk and costly activity due
More informationOperating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand
More informationCD42-STS Operating Manual Diver/ROV Pipeline Pig Location & Tracking System
CD42-STS Operating Manual Diver/ROV Pipeline Pig Location & Tracking System March 8, 2011 1801 North Juniper Avenue Broken Arrow, Oklahoma 74012 USA 1 (800) 580-4234 USA & Canada Toll free 1 (918) 258-6068
More informationZip Technology. ZipNut and ZipCONNECTOR
Zip Technology ZipNut and ZipCONNECTOR Revolutionarily and reliable design Eliminates repetitious turning & cross threading Fits standard bolts vailable in different sizes and materials Leading provider
More informationReliance SG777 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.SG777 10/16/2016 Reliance SG777 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More information