DIGITAL CONSTRUCTION IN SAINT-GOBAIN
|
|
- Ashley Stewart
- 5 years ago
- Views:
Transcription
1 DIGITAL CONSTRUCTION IN SAINT-GOBAIN
2 WHO IS NICOLAJ HVID? DIGITAL CONSTRUCTION DIRECTOR IN SG NORDIC & BALTIC SINCE AUGUST 2015 ARCHITECT & DESIGNER SINCE 1990, 56 YEARS FIRST BIM USER IN DENMARK PREVIOUSLY WORKED WITH TRADITIONAL ARCHITECTURE & DESIGN LAST 12 YEARS (MAINLY) AS BIM AND VDC CONSULTANT EXT ASSOCIATE PROFESSOR AT TECHNICAL UNIVERSITY OF DENMARK
3 WHERE ARE WE TODAY?
4 WHERE SHOULD WE GO?
5 WHAT ARE THE CHALLENGES?
6 HOW DO WE WORK TODAY?
7 WHAT WILL BE OUR WAY OUT? CO-DEVELOPMENT AUTOMATION SYSTEM DELIVERANCES
8 WHAT ABOUT BIM?
9 WHAT ABOUT BIM OBJECTS?
10 WHAT WAS THE PROMISE?
11 WE PROMISED: TRANSPARENCY
12 WE PROMISED: IMPROVED STAKEHOLDER EXPECTATIONS
13 WE PROMISED: DELIVERANCE ON TIME
14 WE PROMISED: MINIMIZING RISKS
15 WE PROMISED: CREATING SCENARIOS FOR BETTER DECISIONS And a lot more.
16 OR IN SHORT WE PROMISED TO MOVE THE COSTS OF ERRORS TO THE COMPUTER
17 DID WE SUCCEED?? How far?
18 HOW FAR ARE WE WITH BIM TODAY? Aware and using BIM Just aware Never heard about it
19 HOW FAR ARE WE WITH BIM TODAY? DESIGN BIM? Concept Design Planning and construction
20 HOW FAR DO WE BELIEVE WE CAN GET TOMORROW? PLANNING AND CONSTRUCTION BIM? Concept Design Planning and construction
21 WHAT WILL BE THE FUTURE BIM? From single BIM to Social BIM
22 WHAT WILL BE THE FUTURE BIM? From single BIM to Social BIM
23 WHAT WILL BE THE FUTURE BIM? From single BIM to Social BIM
24 WHAT WILL BE THE FUTURE BIM? From single BIM to Social BIM
25 GYPROC EXAMPLE Allan has won the subcontract installing drywalls in a new public school.
26 He is quite aware of the fact that optimization equals profit.
27 He now wants to see where he can optimize the project well knowing that the architect probably has aimed too high with his initial wall specifications
28 The general contractor has handed over a BIM along with the shop drawings. A BIM Allan hasn t got neither the tools nor the skills to open.
29 What is he going to do? He turns to Gyproc and asks for help.
30 Gyproc receives the BIM and cleans it up so it is suitable for take-off. After cleaning up, Gyproc specialists assess the BIM and finds out where the designed wall specifications don t comply with regulations,where the owner could profit from alternative solutions and where Allan and Gyproc has the opportunity for upselling.
31 Gyproc uses a configurator to itemize the generic walls into individual building components and the quantities are reloaded into the BIM.
32 What does Allan get from working together with Gyproc?
33
34 VDC EXAMPLE -GYPROC EXISTING PROCESS WITH 2D DRAWINGS Week 1 Week 2 Week 3 Week 4 Technical Sales Gyproc 2D drawings Manual takeoff Manual measures Visual QA Visual Assesment Semi automatic configuration Excel BOM Question: What do we receive? Question How big is the wall? Question: Does it comply with regulations Question: Can it be optimized? Question: What does it consist from? Question: What do we return to customers A process where we give away our knowledge
35 VDC EXAMPLE -GYPROC FUTURE PROCESS WITH BIM Week 1 Week 2 Technical Sales Gyproc IFC BIM Automatic takeoff Automatic rules check Automatic optimizing Automatic configuration Updated BIM Question: What do we receive? Question How big is the wall? Question: Does it comply with regulations Question: Can it be optimized? Question: What does it consist from? Question: What do we return to customers A process where we give away our knowledge- And learn a lot from our customers
36 VDC EXAMPLE -ISOVER FUTURE PROCESS WITH BIM
37 VDC EXAMPLE -ISOVER FUTURE PROCESS WITH BIM
38 THE PITCH THE EXAMPLE
39 THE PITCH THE EXAMPLE
40 WHAT WILL WE DO?
41 BIM FOR CONTRACTORS THE SERVICES THAT MAKE SG THE SUPPLIER THE CONTRACTOR CANNOT LIVE WITHOUT
42 WHY VDC IN SAINT-GOBAIN? VDC can help us to maintain long term relationship with our customers
43 THIS IS NOT ONLY A SERVICE - IT S ALSO A LEARNING PROCESS FOR US
44 WHY VDC IN SAINT-GOBAIN? In short We believe that It can help us on the customer journey
45 WHY BIM? We believe that it can make the Construction industry to Become more productive and profitable
46 WHAT WILL WE DO?
The Manufacturers Perspective
Making BIM work for product manufacturers The Manufacturers Perspective Chris Witte Thank you BIM has been the preserve of Architects and Main Contractors The Manufacturers BIM continuum Stakeholder Management
More informationBG6 Design Framework for Building Services
BG6 Design Framework for Building Services Why? What? How? Martin Ronceray 01 Oct 2018 BSRIA Values 2 BSRIA Sustainable Construction Group 3 Why? The purpose 4 Purpose of BG6 Details of limitations not
More informationPlease comply with the Lean Construction Institute s Usage Policies and Attribution Guidelines at
Please comply with the Lean Construction Institute s Usage Policies and Attribution Guidelines at http://www.leanconstruction.org/usage.pdf when using this file. Thank you. BIM & THE VALUE STREAM LCI:
More informationActionCAD. ActionCAD provides a professional service to the Construction Industry
ActionCad BIM Consultants ActionCAD ActionCAD provides a professional service to the Construction Industry based in Cheshire operating Globally. We are Certified Professional BIM Consultants and are helping
More informationPrecast / Prestressed Concrete Trade Coordination Case Study Jason P. Lien, PE, FPCI EnCon United, Denver, Colorado
October 17-19, 2016 ATLANTA, GEORGIA Precast / Prestressed Concrete Trade Coordination Case Study Jason P. Lien, PE, FPCI EnCon United, Denver, Colorado Case Study Overview Explore BIM requirements of
More informationHome Building Industry Innovations BIM and VR
Home Building Industry Innovations BIM and VR What is BIM 2D hand drafting. Historically we started from a point of documentation. Hand drafting all buildings to convey our ideas and construction methods.
More information1 Introduction. M.Rajabi a, T.Bigga b and M.A.Bartl c.
Optimization of the quantity take-off (QTO) process for Mechanical, Electrical and plumbing (MEP) trades in tender estimation phase of the construction projects M.Rajabi a, T.Bigga b and M.A.Bartl c a
More informationImplementing Model Semantics and a (MB)SE Ontology in the Civil Engineering & Construction Sector
Nordic Systems Engineering Tour 2015 June 1 4, 2015 Implementing Model Semantics and a (MB)SE Ontology in the Civil Engineering & Construction Sector Henrik Balslev Systems Engineering A/S - Denmark www.syseng.dk
More informationBIM Introduction. Building Information Management Definitions, Applications and general information. Betty Bezos
BIM Introduction Building Information Management Definitions, Applications and general information Betty Bezos betty@bezos.com 9/1/2017 1 9/1/2017 2 Innovations in BIM 3D Design: 3D visualizations allow
More informationTekla 기반의 EPC 업무효율성향상 테클라코리아 / 정종훈
Tekla 기반의 EPC 업무효율성향상 테클라코리아 / 정종훈 Contents Tekla Corporation Tekla Structures 소개 Tekla Structures 적용사례 Tekla Structures 적용범위 2 Tekla Corporation 3 Tekla Corporation Model-based software for customers
More informationNational BIM Standard - United States Version 3
National BIM Standard - United States Version 3 5 Practice Documents 5.5 Mechanical, Electrical, Plumbing, And Fire Protection Systems (MEP) Spatial Coordination Requirements for Construction Installation
More informationWelcome / COBie Help Desk Mechanics COBie Fact or Fiction! Life-Cycle information exchange COBie Calculator
0900-0901 Welcome / COBie Help Desk Mechanics 0901-0910 COBie Fact or Fiction! 0910-0920 Life-Cycle information exchange 0920-0935 COBie Calculator (Penn State) 0935-0950 Case Study 1 (Tokmo/EcoDomus)
More informationBuilding (Process) Room Report Jan Karlshøj, IDM Coordinator/Process Room Leader buildingsmart Building (Process) Room Toronto, October 30, 2014
Building (Process) Room Report Jan Karlshøj, IDM Coordinator/Process Room Leader buildingsmart Building (Process) Room Toronto, October 30, 2014 Building (Process) Room The Process Room were established
More informationOrion Master Data Workflow Article
Orion Master Data Workflow Article Translation from draft article that will be published in SAPSAnytt magazine Q1/2018 Based on interview with Orion s Andreas Rämö Elina Heinonen Oscar Winberg Customer
More informationBenchmark of Alberta s AEC Industries Knowledge of Building Information Modeling (BIM)
Benchmark of Alberta s AEC Industries Knowledge of Building Information Modeling (BIM) Basel Abdulaal, Ahmed Bouferguene, Mohamed Al-Hussein Department of Civil & Environmental Engineering Hole School
More informationWhat is Meant by Level of Accuracy? As a service provider who. By John M. Russo, AIA. room width = 10'-0' building length = 100'-0' x = 1/4"
room width = 10'-0' x = 1/4" building length = 100'-0' x = 1/4" What is Meant by Level of Accuracy? As a service provider who documents buildings I often hear my clients say I need one quarter inch accuracy,
More informationCONSTRUCTION MACHINES IN THE DIGITAL AGE CONSTRUCTION EQUIPMENT MAKERS NEED TO FIND THEIR PLACE IN SMART BUILDING SITES. Romed Kelp and David Kaufmann
CONSTRUCTION MACHINES IN THE DIGITAL AGE CONSTRUCTION EQUIPMENT MAKERS NEED TO FIND THEIR PLACE IN SMART BUILDING SITES Romed Kelp and David Kaufmann At first glance, giant earth-moving excavators and
More informationSECTION SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 01 33 00 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationA. Section includes administrative and procedural requirements for project record documents, including the following:
SECTION 017839 - PROJECT RECORD DOCUMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01
More informationBIM Design Services/ Introduction. T: E:
Introduction At Godfrey Syrett, Revit is now our default software, we have embraced its capabilities to enhance our design process and add value to it by utilising all its benefits. It is the integration
More informationLESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS
LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS INTRODUCTION In this lesson, you ll learn about the different types of drawings used in the construction industry, and how to read floor plans, section drawings,
More informationWhite paper The Quality of Design Documents in Denmark
White paper The Quality of Design Documents in Denmark Vers. 2 May 2018 MT Højgaard A/S Knud Højgaards Vej 7 2860 Søborg Denmark +45 7012 2400 mth.com Reg. no. 12562233 Page 2/13 The Quality of Design
More informationBIM Status Overview. Arto Kiviniemi Research Professor ICT for Built Environment VTT Technical Research Centre of Finland
BIM Status Overview Arto Kiviniemi Research Professor ICT for Built Environment VTT Technical Research Centre of Finland BIMs VBE Measurement Framework ICTs can have three types of business effects Markets
More informationSECTION PROJECT COORDINATION VIA BIM
SECTION 01 31 13 PROJECT COORDINATION VIA BIM PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division
More informationSWEN 256 Software Process & Project Management
SWEN 256 Software Process & Project Management What is quality? A definition of quality should emphasize three important points: 1. Software requirements are the foundation from which quality is measured.
More informationAdvanced façade design and technology. Industry view and where to go with research
Industry view and where to go with research Prof. Dr.-Ing. Winfried Heusler SCHÜCO-International KG / Deutschland My Personal Past 33 years of Façades and Lots of Excitement 1,00 Zuluft 2,85 Abluft 30
More informationSamuel Hudson BIM Support Specialist. Jeff Owens AIA, LEED AP
BIM Preparation for the USACE Lessons Learned in Conversion from REVIT to BENTLEY BIM Presenters: Samuel Hudson BIM Support Specialist Jeff Owens AIA, LEED AP L E ll Lee Ezell Consulting BIM Specialist
More informationSIX THETA ACHIEVE A STRONGER AND MORE EFFICIENT SUPPLY CHAIN WITH SIX THETA. 28 November 2017
SIX THETA ACHIEVE A STRONGER AND MORE EFFICIENT SUPPLY CHAIN WITH SIX THETA 28 November 2017 VALCON LEAVES GLOBAL FOOTPRINTS Established Annual growth rate Employees Operating countries 2000 15% +200 38
More informationDATA AT THE CENTER. Esri and Autodesk What s Next? February 2018
DATA AT THE CENTER Esri and Autodesk What s Next? February 2018 Esri and Autodesk What s Next? Executive Summary Architects, contractors, builders, engineers, designers and planners face an immediate opportunity
More information1st ANNUAL BIM REPORT Foreword
Foreword The First Annual BIM Survey in the Greater Toronto Area (GTA) was conducted by researchers at the Building Tall Research Centre at University of Toronto in collaboration with Toronto BIM Community
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 01 3300 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationINSTALLATION MANUAL STOREFRONT DOORS
INSTALLATION MANUAL STOREFRONT DOORS www.aluflam-usa.com SYSTEM DESCRIPTION - Extruded and filled aluminum framing, tested and approved by UL - 3-3/8 frame depth - Clear, fire-rated safety glazing - Door
More informationHow technology is changing the way we deliver Structural Steelwork. Brenden Picton Phil Shanks
How technology is changing the way we deliver Structural Steelwork Brenden Picton Phil Shanks Presentation Outline Project Introduction & Process Description From the Engineers Perspective From the Detailers
More informationAddendum to Description of Services for Building and Planning, Digital Design. The Association of of Consulting Engineers
Addendum to Description of Services for Building and Planning, 2012 8.4 Digital Design 2016 The Association of of Consulting Engineers FRI and DANSKE ARK Addendum to Description of Services for Building
More informationServices Overview. Northeast Blueprint
Services Overview 2D CAD Conversions Paper to CAD 2D CAD Conversions Construction Engineering / CAD Services Construction Markups Consultant Drawings Coordinated Drawings As -Builts Steel Structural Detailing
More informationBuilding Information Modeling
Building Information Modeling Gunnar Grün, Munich, 7.3.2018 Auf Wissen bauen Building Information Modeling (BIM) towards the uniform central building model BIM today (1) Used for visualization Reception
More informationChallenges for productivity and industrialized Construction Bmst. Ing. Martin Dobler Austria
Challenges for productivity and industrialized Construction Bmst. Ing. Martin Dobler Austria 26.7.2017 Structure of the talk Industrialization Building systems Building systems with precast concrete Economy
More informationPotentials and Barriers for Implementing BIM in the German AEC Market
Potentials and Barriers for Implementing BIM in the German AEC Market Results of a current market analysis Petra von Both Karlsruhe Institute for Technology, Department Building Lifecycle Management, Germany
More informationThe Passion Project TM Business Launch Blueprint
The Passion Project TM Business Launch Blueprint Welcome to The Passion Project TM Business Launch Blueprint! It s clear that since you have arrived at this very spot, there is a fire burning inside of
More informationBIM for FM: Helping Owners Realize the Benefits of BIM
Monday, June 13, 2016-4:00pm-5:15pm, Clark, Lower Level Presented by: Bert Jones, Associate Vice Chancellor for Facilities Management Services, Virginia Community College System Jeff Van Fleet, Account
More informationImplementing Model Semantics and a (MB)SE Ontology in Civil Engineering & Construction Sector
25 th Annual INCOSE International Symposium (IS2015) Seattle, WA, July 13 July 16, 2015 Implementing Model Semantics and a (MB)SE Ontology in Civil Engineering & Construction Sector Henrik Balslev Systems
More informationEvaluation of the Danish Safety by Design in Construction Framework (SDCF)
Downloaded from orbit.dtu.dk on: Dec 15, 2017 Evaluation of the Danish Safety by Design in Construction Framework (SDCF) Schultz, Casper Siebken; Jørgensen, Kirsten Publication date: 2015 Link back to
More informationCove and Cornice Decorative room features
GYPROC Cove and Cornice Decorative room features 1 2 3 4 1 2 3 4 Gyproc Cove with one Cornice Strip on ceiling and wall. Gyproc Cove with twocornice Strips on ceiling and wall. Gyproc Cove with one Cornice
More informationGYPROC. Cove and Cornice Decorative room features....made easy
GYPROC Cove and Cornice Decorative room features...made easy 1 2 3 4 1 2 3 4 Gyproc Cove with one Cornice Strip on ceiling and wall. Gyproc Cove with two Cornice Strips on ceiling and wall. Gyproc Cornice
More informationEsri and Autodesk What s Next?
AN ESRI VISION PAPER JANUARY 2018 Esri and Autodesk What s Next? Copyright 2018 Esri All rights reserved. Printed in the United States of America. The information contained in this document is the exclusive
More informationBIM adoption policies
. Dr. Bilal Succar Change Agents + BIMexcellence.org bsuccar@changeagents.com.au In this presentation, I will briefly: Explain what is meant by country-scale BIM adoption Explain five ways for measuring
More informationCOVER SHEET A0.1 A0.1 COVER SHEET A1.1 FLOOR PLANS - FOUNDATION & MAIN LEVEL A1.2 FLOOR PLANS - UPPER LEVEL & ROOF A3.1 SECTIONS & INTERIOR ELEVATIONS
TWO-STORY DUPLEX UNIT ONE (WILLOW): THREE BEDROOM, TWO BATH UNIT TWO (FIR): TWO BEDROOMS, ONE AND ONE-HALF BATH - 2012 INTERNATIONAL RESIDENTIAL CODE - CITY OF BRECKENRIDGE MUNICIPLE CODE 1. ALL WORK SHALL
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 12/12/2018
SECTION 01 7839 - PROJECT RECORD DOCUMENTS GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationFoundations Required for Novel Compute (FRANC) BAA Frequently Asked Questions (FAQ) Updated: October 24, 2017
1. TA-1 Objective Q: Within the BAA, the 48 th month objective for TA-1a/b is listed as functional prototype. What form of prototype is expected? Should an operating system and runtime be provided as part
More informationBIM & Emerging Technologies. Disrupting Design process & Construction
BIM & Emerging Technologies Disrupting Design process & Construction Introduction Introduction - BIM Disrupting the Construction Introduction Design Major disruption already in various parts of the World
More informationErwin Mlecnik 1,2. Keywords: Renovation, Supply Chain Collaboration, Innovation, One Stop Shop, Business models. 1. Introduction
One Stop Shop: Development of Supply Chain Collaboration for Integrated Housing Retrofit Paper for: International Comparative Urban Retrofit Workshop: Purpose, Politics and Practices 13th 14th September
More informationLevel of Development vs. Level of Detail for BIM
Faculty of Civil, Geo and Environmental Engineering Prof. Dr.-Ing. André Borrmann Faculty of Architecture Prof. Dr.-Ing. Frank Petzold Level of Development vs. Level of Detail for BIM 27. July 2018 Report
More informationINTERDISCIPLINARY, BIM-SUPPORTED PLANNING PROCESS
INTERDISCIPLINARY, BIM-SUPPORTED PLANNING PROCESS Lars Oberwinter Vienna University of Technology, E234 - Institute of Interdisciplinary Construction Process Management, Vienna, Austria, Vienna, Austria,
More informationVRML AS AN EFFECTIVE CONSTRUCTION COMMUNICATION TECHNIQUE
Congrès annuel 2008 de la SCGC CSCE 2008 Annual Conference Québec, QC 10 au 13 juin 2008 / June 10-13, 2008 VRML AS AN EFFECTIVE CONSTRUCTION COMMUNICATION TECHNIQUE W. Hijazi, Mhd. A. Ghebeh, T. Zayed
More informationBIM Services India An Architectural & Engineering Company
BIM Services India An Architectural & Engineering Company Offices Our Spread USA UK Office India Office Canada Office Australia Office JBH-Tesla Design Group, Inc. 100 Executive Boulevard-Suite #204, Ossining,
More informationEmerging Innovative Technologies Driving Change. Stephen R Hagan FAIA
Emerging Innovative Technologies Driving Change President CEO Stephen R Hagan FAIA Hagan Technologies LLC Emerging Innovative Technologies Driving Change for Buildings, Eco-Districts and Smart Sustainable
More informationBIM Awareness and Acceptance by Architecture Students in Asia
BIM Awareness and Acceptance by Architecture Students in Asia Euisoon Ahn 1 and Minseok Kim* 2 1 Ph.D. Candidate, Department of Architecture & Architectural Engineering, Seoul National University, Korea
More informationEast Central College
SECTION 013300 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationSECTION SUBMITTALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 01300 SUBMITTALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and other Division-1 Specification Sections,
More informationRecent Advances in BIM in Geotechnics
Recent Advances in BIM in Geotechnics Jim De Waele Managing Director Keller Limited Ryton-on-Dunsmore, Coventry United Kingdom ABSTRACT The use of Building Information Modelling (BIM) is becoming more
More informationBrad Luke. Director Peddle Thorp Auckland
Brad Luke Director Peddle Thorp Auckland Site Observation and Practical Completion Preparation PEDDLE THORP Introduction Architects Agreement for Services. Observation Work Plans. Auckland Council Quality
More informationOUR CLIENT BASE. Canada Norway. UAE Singapore. Germany. Netherlands USA. Hawaii. Australia. Qatar Oman. Belgium. New Zealand.
WHOWE ARE We help construction companies, general contractors, architects & engineers, integrate BIM into their projects seamlessly within their predefined timelines and budget, bridging the gap between
More informationBrussels 18/12/2018. Level(s) pilot project Experience Center in Slovenia Vincent Briard, Sustainability and Product Regulatory Affairs Director
Brussels 18/12/2018 Level(s) pilot project Experience Center in Slovenia Vincent Briard, Sustainability and Product Regulatory Affairs Director Knauf Insulation supports Level(s) Part of Knauf Insulation
More informationStory Corp Project. Interview Transcript. 49 Mostafa El Nahas,Nasr City,Cairo. The American University In Cairo
1 Story Corp Project Interview Transcript Interviewer: Narrator: Ola Noureldin Maria Yassa Date: 27/9/2011 Place: Narrator s home 49 Mostafa El Nahas,Nasr City,Cairo College: Professor: The American University
More informationOrganizational Skills. 10 Organizational Tips:
Organizational Skills 10 Organizational Tips: 1. First start off by creating a clear area - Clear your work space of all unnecessary materials not related to the assignment that you are working on at the
More informationAPPROACH FOR BIM IMPLEMENTATION: A VISION FOR THE BUILDING INDUSTRY
Neto, J., P. (2016). Approach for BIM Implementation: A Vision for the Building Industry. In: Proc. 24 th Ann. Conf. of the Int l. Group for Lean Construction, Boston, MA, USA, sect.1 pp. 143 152. Available
More informationRoboCopper Supplier collaboration and innovation. An example from Boliden Harjavalta. Timo Rautalahti General Manager Boliden Harjavalta
RoboCopper Supplier collaboration and innovation. An example from Boliden Harjavalta Timo Rautalahti General Manager Boliden Harjavalta What was RoboCopper? An open competition for experts in the fields
More informationIn this presentation, I will briefly:
In this presentation, I will briefly: Explain what is meant by country-scale BIM adoption Explain five ways for measuring BIM adoption. Compare the approaches taken by policy makers to encourage BIM diffusion.
More informationTitle. Author(s)YU-CHIH SU; YI-CHUAN HSIEH; MENG-CHUNG LEE; CHIH-YUA. Issue Date Doc URL. Type. Note. File Information CONSTRUCTION
Title DEVELOPING BIM-BASED SHOP DRAWING AUTOMATED SYSTEM I CONSTRUCTION Author(s)YU-CHIH SU; YI-CHUAN HSIEH; MENG-CHUNG LEE; CHIH-YUA Issue Date 2013-09-11 Doc URL http://hdl.handle.net/2115/54245 Type
More informationEnhancing industrial processes in the industry sector by the means of service design
ServDes2018 - Service Design Proof of Concept Politecnico di Milano 18th-19th-20th, June 2018 Enhancing industrial processes in the industry sector by the means of service design giuseppe@attoma.eu, peter.livaudais@attoma.eu
More informationMoving to Model-Based Design
Infrastructure Solutions White Paper Moving to Model-Based Design Choosing Between 2D and 3D Do you really have to choose between 2D and 3D? The answer is no, but it is important to know why. Over the
More informationMerrick Pet Care New Distribution Center Hereford, Texas
Merrick Pet Care New Distribution Center Hereford, Texas DATE: March 16, 2015 ARCHITECTURAL/ELECTRICAL ADDENDUM #6 FROM: TO: PROJECT: Lavin Associates, Architects Plan Holders of Record Merrick Pet Care,
More informationNew Cooperation Models in BIM Contexts
New Cooperation Models in BIM Contexts by Albert LEJEUNE, Prof. ESG-UQAM COSIMA 2 cosima.uqam.ca Director of the Cognitive Science Institute UQAM ETS, Montréal February 2, 2018 BIM in an Architectural
More informationFINAL proposal for Scope, Business Plan and initial Work Programme
. FINAL proposal for Scope, Business Plan and initial Work Programme CEN/TC XXX Building Information Modelling (BIM) CEN/TC XXX Business Plan Date:2014-12-10 Version: Final proposal Page: 1 Proposal developed
More informationBIM Policy Development: Different Countries, Common Approaches
: Different Countries, Common Approaches Bilal Succar, PhD Director, BIMexcellence.com Mohamad Kassem, PhD Senior Lecturer + Enterprise Fellow, Teesside University 2 this presentation is in Two Parts:
More informationWhat Are Submittals?
Introduction Overview of the Submittal Process Comparison of AIA with ConsensusDOCS Architect and Contractor Obligations FAR Requirements State Licensing Requirements 1 What Are Submittals? Submittals
More informationASSIGNMENT OF COPYRIGHT FORM
ASSIGNMENT OF COPYRIGHT FORM I undersigned, [Marc Goodwin, Archmospheres / UK / Copyright owner], born the 4 of November 1974 at London, residing at 6 Balchins Lane Westcott UK, acting as the author, copyright
More informationBIM EXECUTION PLAN IN CZECH REPUBLIC
Abstract BIM EXECUTION PLAN IN CZECH REPUBLIC Otmar Hrdina* 1, Petr Matějka 2 1 Faculty of Civil Engineering, Czech Technical University in Prague, Thakurova 7/2077 166 29 Prague 6 - Dejvice, Czech Republic,
More informationDESIGNING LANDSCAPES (A walk through the landscape architectural design process)
DESIGNING LANDSCAPES (A walk through the landscape architectural design process) KENNETH K. KAMMEYER, A.S.L.A. Senior Principal Kammeyer & Associates Incorporated Corona, California PROLOGUE: A reading
More informationA. Action Submittals: Written and graphic information that requires Architect's responsive action.
SECTION 01330 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 1 Specification
More informationPRECAST FLOOR PRODUCTION SEMI - PRO - EDGE
PRECAST FLOOR PRODUCTION SEMI - PRO - EDGE OUR PROMISE. PROFITABLE PRECAST. WHAT IS PRECAST? A smart and safe way to build consistent high quality Beautiful and sustainable Precast is a smart, industrialized
More informationDigital Data. Its use in geotechnical design & execution. Remedy Geotechnics Ltd. Dr Derek Egan Director.
Digital Data Its use in geotechnical design & execution Dr Derek Egan Director Remedy Geotechnics Ltd www.remedygeotechnics.com Digital Data - Use in geotechnical design & execution Introduction Aims of
More informationCalculation of precast elements as an introduction to BIM
Building Information Modelling BIM Calculation of precast elements as an introduction to BIM BIM is the integrated process of planning, building and managing, supported by a consistent digital building
More informationAutomotive. Martin Öman
Automotive Martin Öman 2 Trends reshaping Automotive Connectivity Autonomous Electrification 3 The new market landscape Past: OEM competition Future: Complex market landscape Cities & others Established
More informationTimber joist. Timber joist ceilings and separating / compartment floors. Timber joist.
ceilings and separating / compartment floors Ceilings to timber joist floors are an established form of ceiling construction, widely used in both new housing and refurbishment. Separating / compartment
More informationJEFFERSON LAB TECHNICAL ENGINEERING & DEVELOPMENT FACILITY (TEDF ONE) Newport News, Virginia
BULLETIN NO. 6 TO THE PLANS AND SPECIFICATIONS FOR JEFFERSON LAB TECHNICAL ENGINEERING & DEVELOPMENT FACILITY (TEDF ONE) Newport News, Virginia EwingCole Architects.Engineers.Interior Designers.Planners
More informationISBN
SBi 2010:19 CREDIT Summary and National Recommendations Indicators and benchmarking framework for transparency in construction and real estate in the Nordic and Baltic countries CREDIT Report 6 CREDIT
More informationJOINT PASSION, JOINT PROGRESS. Profitable Partnership between Vestas and Bachmann
JOINT PASSION, JOINT PROGRESS Profitable Partnership between Vestas and Bachmann wind.application For almost 40 years Vestas Wind Systems A/S, headquartered in Århus in Denmark, has been considered one
More informationUsing BIM to follow up milestones in a project plan during the design phase
Building Information Modelling (BIM) in Design, Construction and Operations 97 Using BIM to follow up milestones in a project plan during the design phase Ø. Mejlænder-Larsen Norwegian University of Science
More informationProduct and Process Room Workshops in Oslo, March 2012
Document id Title Organisation /Author Date Status IDMC_27_5 Product and Process Room Workshops Oslo bsi/roger Grant/Jan Karlshøj 13-Mar-12 Ver. 5. Product and Process Room Workshops in Oslo, March 2012
More informationUX: THE KEY TO SUCCESS FOR YOUR PROJECTS
DR. ANDRÁS RUNG OUR CLIENTS Ergománia Owner & Managing Director UX: THE KEY TO SUCCESS FOR YOUR PROJECTS UX trends and spectacular return indicators Hungary's first UX agency 15 years of experience, specialisation
More informationRobotizing workforce in future built environments
Robotizing workforce in future built environments Maas, G.J.; van Gassel, F.J.M. Published: 01/01/2014 Document Version Accepted manuscript including changes made at the peer-review stage Please check
More informationHow Contractors and Technology Solutions Providers are Partnering to Bring Advanced Technology
Enhancing BIM with Augmented & Virtual Reality How Contractors and Technology Solutions Providers are Partnering to Bring Advanced Technology James Benham Twitter: @JamesMBenham, #JBTechTalk COLLEGE STATION,
More informationUnderstanding your limits
Understanding your limits 27 th September 2018 Ian Downie Crane & Lifting Manager 1 Subsea 7-2018 The Problem: Engineers, offshore operations teams, ship owners, marine warranty surveyors, clients and
More informationABC PhD DOCTORAL PROGRAM IN ARCHITECTURE BUILT ENVIRONMENT AND CONSTRUCTION ENGINEERING
ABC PhD DOCTORAL PROGRAM IN ARCHITECTURE BUILT ENVIRONMENT AND CONSTRUCTION ENGINEERING ABCPhD CALL4SCHOLARSHIP 34 RESEARCH TOPIC: Technologies for the Design, Construction, Commissioning and Management
More informationUtilization of Revit Applications as Preliminary Shop Drawings to Improve Construction processes
Utilization of Revit Applications as Preliminary Shop Drawings to Improve Construction processes Allbban H. Khalid Southern Polytechnic State University, 1100 South Marietta Parkway, Marietta GA 30067
More informationATDESIGN. Working with an Assignment Photographer
Working with an Assignment Photographer Making sure your project is professionally photographed is an essential step in communicating your ideas. With the photographs being used to market your firm s expertise,
More informationBIM Won t Work as a Deliverable, Will It? Dace A. Campbell, AIA, LEED AP (Moderator)
BIM Won t Work as a Deliverable, Spring BIMForum San Diego, CA Hilton San Diego Bayfront April 29-30, 2015 Will It? Dace A. Campbell, AIA, LEED AP (Moderator) @DaceCampbell Learning Objectives 1. Gain
More informationTYNDP 2016 public consultation
TYNDP 2016 public consultation Overview ENTSO E aims with this consultation to get feedback on: CURRENT TYNDP 2016 main report and the associated 12 Insight Reports FUTURE TYNDP
More informationCR BIM at the Heart of the MEP Subcontractor Business
CR4224 - BIM at the Heart of the MEP Subcontractor Business Damien Legrand BIM Solutions Centre Sophie Montenot BYME Engineering Hub (Singapore) Class Description Dive into the heart of an MEP subcontractor
More information