Features. = +25 C, Vdc = +5V
|
|
- Jonathan Pitts
- 5 years ago
- Views:
Transcription
1 amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 khz Noise Figure: db Gain: 3. db Output ip3: +22. dbm Ohm Matched Input/Output Single Supply Voltage: +V Hermetically Sealed Module Field Replaceable sma Connectors - C to +8 C Operating Temperature General Description The HMC-C is a GaAs HBT Ultra Low Noise Amplifier in a miniature, hermetic module designed to operate between 2 and 8 GHz. This high dynamic range amplifier module provides 3. db of gain, db noise figure and up to +22. dbm of OIP3 with a single supply of +V. The ultra low phase noise contribution of -6 dbc/hz, enables superior modulation accuracy within transceiver architectures. The wideband distributed amplifier I/O s are internally matched to Ohms and DC blocked for robust performance. The module features removable sma connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit. Electrical Specifications, T A = +2 C, Vdc = +V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range GHz Gain db Gain Flatness ±.2 ±2.2 db Gain Variation Over Temperature.2.27 db/ C Noise Figure db Input Return Loss 8 6 db Output Return Loss 7 db Output Power for db Compression (PdB) dbm Saturated Output Power (Psat) 8. 6 dbm Output Third Order Intercept (IP3) dbm Phase Hz -4 - dbc/hz Phase khz - - dbc/hz Phase khz -6 - dbc/hz Phase MHz -6-6 dbc/hz Supply Current ma - One Technology Way, P.O. Box 96, Norwood, MA Phone: Order online at 2 Alpha Road Chelmsford, MA 824 Phone: Fax: Application Support: Phone: -8-ANALOG-D
2 Gain & Return Loss v.7 Gain vs. Temperature HMC-C 2 2 RESPONSE (db) S2 S S22 GAIN (db) Amplifiers Input Return Loss vs. Temperature Output Return Loss vs. Temperature RETURN LOSS (db) RETURN LOSS (db) Noise Figure vs. Temperature NOISE FIGURE (db) One Technology Way, P.O. Box 96, Norwood, MA Phone: Order online at 2 Alpha Road Chelmsford, MA 824 Phone: Fax: Application Support: Phone: -8-ANALOG-D - 2
3 v.7 HMC-C PdB vs. Temperature Psat vs. Temperature 2 2 amplifiers PdB (dbm) Psat (dbm) 2 Output IP3 vs. Temperature 3 Phase Noise at Pout = 2 GHz -2 IP3 (dbm) Phase Noise at Pout = 2 GHz Phase Noise at Pout = 8 GHz One Technology Way, P.O. Box 96, Norwood, MA Phone: Order online at 2 Alpha Road Chelmsford, MA 824 Phone: Fax: Application Support: Phone: -8-ANALOG-D
4 Phase Noise at 2 GHz v.7 HMC-C Phase Noise at 2 GHz Amplifiers Phase Noise at 8 GHz Phase Noise at 2 GHz Phase Noise at 2 GHz Phase Noise at 8 GHz One Technology Way, P.O. Box 96, Norwood, MA Phone: Order online at 2 Alpha Road Chelmsford, MA 824 Phone: Fax: Application Support: Phone: -8-ANALOG-D - 4
5 Absolute Maximum Ratings v.7 HMC-C amplifiers Bias Supply Voltage (Vdc) +7V RF Input Power (RFIN) + dbm Continuous Pdiss (T = 8 C).6W Channel Temperature 7 C Thermal Resistance 9. C/W Storage Temperature -6 to + C Operating Temperature - to +8 C ELECTROSTATIC sensitive DEVICE OBserVE HANDLING precautions Pin Descriptions Pin Number Function Description Interface Schematic RFIN & RF Ground RF input connector, coaxial female, field replaceable. This pin is AC coupled and matched to Ohms. 2 Vdc Power supply voltage for the amplifier. 3 RFOUT & RF Ground RF output connector, coaxial female, field replaceable. This pin is AC coupled and matched to Ohms. 4 GND Power supply ground. - One Technology Way, P.O. Box 96, Norwood, MA Phone: Order online at 2 Alpha Road Chelmsford, MA 824 Phone: Fax: Application Support: Phone: -8-ANALOG-D
6 Outline Drawing v.7 HMC-C.9 [4.99]. [2.79] J.22 [.4].64 [6.26].43 [.87] J3 J3 +V BIAS SUPPLY.3 [.76] DIA PIN X.2 LG. GROUND J2.29 [7.38].8 [4.7] 2X.3 [8.89].7 [7.78] Amplifiers #-8 HARDWARE THRU.74 [.88] DIA THRU (REMOVE HARDWARE TO MOUNT ASSEMBLY).42 [.62] 2X.38 [9.8].39 [3.3] 2X FIELD REPLACEABLE SMA CONNECTORS. FEMALE 2X.6 [.2] LOT NO. SEE NOTE [6.26] REF 2X.73 [.8].94 [2.39] 2X.7 [.9] X. LG.7 [4.48] 2X.8 [4.7].36 [9.4] CHAMFER INDICATES ORIENTATION 2X R.4 [R.93] VIEW WITH SMA CONNECTORS AND BRACKET REMOVED..8 [4.7].4 2X [.2] Package Information Package Type C- Package Weight [].2 gms [2] Spacer Weight N/A [] Includes the connectors [2] ± gms Tolerance NOTES:. package, leads, COVER material: KOVAR 2. spacer material: aluminum 3. plating: electrolytic GOLD microinches min., OVER electrolytic NICKEL 7 microinches min. 4. all DimeNSIONS are IN INCHES [millimeters].. TOleraNCES ±. [.3] UNless OTHERWise specified. 6. field replaceable sma CONNECTORS. TENSOLITE 62-CCSF OR EQUIValeNT. 7. TO MOUNT MODULE TO SYSTEM platform replace -8 HARDWare WITH DesireD MOUNTING SCREWS. One Technology Way, P.O. Box 96, Norwood, MA Phone: Order online at 2 Alpha Road Chelmsford, MA 824 Phone: Fax: Application Support: Phone: -8-ANALOG-D - 6
Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:
More informationFeatures. = +25 C, Vs= +8V to +16V
v2.17 Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features Electrical Specifications,
More informationFeatures. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:
More informationFeatures. = +25 C, +Vdc = +6V, -Vdc = -5V
HMC-C59 v.59 WIDEBAND LNA MODULE, - 2 GHz Typical Applications The HMC-C59 Wideband LNA is ideal for: Telecom Infrastructure Features Noise Figure:.8 db @ 8 GHz High Gain: 6 db @ 8 GHz PdB Output Power:
More informationFeatures. = +25 C, +Vdc = +6V, -Vdc = -5V
v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional
More informationFeatures. Gain Variation Over Temperature db/ C
HMC-C26 Features Typical Applications The HMC-C26 Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain: 3 db
More informationFeatures. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz Insertion Loss* db. Input Return Loss* 10 db
v4.711 HMC-C Features Low RMS Phase Error: Low Insertion Loss: 7 db Excellent Flatness 3 Coverage, LSB = 22. Hermetically Sealed Module Field Replaceable SMA Female Connectors Typical Applications The
More informationFeatures DC DC DC - 14 DC Min Attenuation Attenuation > 5 db Min Attenuation Attenuation > 10 db
v1.68 HMC-C53 MODULE, DC - GHz Typical Applications The HMC-C53 is ideal for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Wide Bandwidth:
More informationFeatures. DC - 18 GHz. Switching Transients DC - 18 GHz 12 mvpp
v1.711 HMC-C5 SWITCH, DC - 1 GHz Typical Applications The HMC-C5 is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM Test Instrumentation Functional Diagram
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationFeatures. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
More informationFeatures. = +25 C, Vdd = 5V
v3.117 HMC1LH5 Typical Applications The HMC1LH5 is a medium PA for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Gain: 5 db Saturated
More informationHMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description
v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationFeatures. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz
v2.1 DIVIDE-BY-, DC - 13 GHz Typical Applications Prescaler for DC to Ku Band PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram
More informationFeatures. = +25 C, Vdc = +12V
Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationFeatures OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
More informationFeatures. = +25 C, Vdd = +4V, Idd = 90 ma [2]
v.91 HMCLCB AMPLIFIER, 1-27 GHz Typical Applications This HMCLCB is ideal for: Features Noise Figure: 2.2 db @ 2 GHz Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation
More informationFeatures. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units
v2.917 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multipoint Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram High Output IP3: +28 dbm Single
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More informationFeatures. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationFeatures. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationFeatures. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationFeatures. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*
v.7 HMCLH AGC AMPLIFIER, - GHz Typical Applications The HMCLH is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C I Test Instrumentation Fiber Optics Functional Diagram Features
More informationFeatures. = +25 C, Vdd = +3V
v.117 HMC3LPE Typical Applications Features The HMC3LPE is ideal for: Millimeterwave Point-to-Point Radios LMDS VSAT SATCOM Functional Diagram Low Noise Figure:. db High Gain: db Single Positive Supply:
More informationOBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description
v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,
More informationFeatures. = +25 C, Vd1 = 3.6V, Vd2 = 20V, Vd3 = 6V
Typical Applications The is ideal for: Military Radar, EW & ECM Test & Measurement Equipment Lab Instrumentation Industrial/Medical Equipment Functional Diagram Features Extremely Compact, Broadband Synthesizer
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationFeatures. Gain: 12 db. 50 Ohm I/O s
v.19 Typical Applications An excellent cascadable Ohm Block or LO Driver for: Microwave & VSAT Radios Test Equipment Military EW, ECM, C 3 I Space Telecom Functional Diagram Features : 1 P1 Output Power:
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationFeatures. Gain: 15.5 db. = +25 C, Vdd = 5V
Typical Applications v2.97 Features AMPLIFIER, 3.5-7. GHz The HMC392 is ideal for: Gain: 5.5 db Point-to-Point Radios VSAT LO Driver for HMC Mixers Military EW, ECM, C 3 I Space Functional Diagram Noise
More informationFeatures. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationFeatures. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.414 Typical Applications The HMC5846LS6
More informationHMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
More informationFeatures. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military Radios, Radar & ECM Space Systems Test Instrumentation Features Isolation: 48 @ 2 GHz 34 @ 6 GHz Insertion
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationv02.06 Insertion Loss INSERTION LOSS () C +85 C -40 C Isolation ISOLATION () Return Loss RETURN LOSS ()
v02.06 Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military Radios, Radar & ECM Space Systems Test Instrumentation Features Isolation: 55 @ 2 GHz 42 @ 6 GHz Insertion
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationFeatures. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]
v3.41 Typical Applications Features The is ideal for: Test Instrumentation Military & Space Fiber optics Functional Diagram P1dB Output Power: + dbm Psat Output Power: + dbm High Gain: db Output IP3: 42
More informationTEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =
TEL:7-339622 FAX:7-337612 E-MAIL: szss@3.com v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless
More informationHMC397 DRIVER & GAIN BLOCK AMPLIFIERS - CHIP. InGaP HBT GAIN BLOCK MMIC AMPLIFIER, DC - 10 GHz. Features. Typical Applications. General Description
v3.19 MMIC AMPLIFIER, DC - 1 GHz Typical Applications An excellent cascadable Ohm Block or LO Driver for: Microwave & VSAT Radios Test Equipment Military EW, ECM, C 3 I Space Telecom Functional Diagram
More informationFeatures. = +25 C, Vdd = +5V, Idd = 63 ma
v2.213 LOW NOISE AMPLIFIER, 2-2 GHz Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Military & Space Telecom Infrastructure Fiber Optics Functional Diagram Noise
More informationFeatures. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma
HMC311ST9 / 311ST9E v.17 MMIC AMPLIFIER, DC - GHz Typical Applications The HMC311ST9(E) is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV & Cable Modem Microwave Radio Functional Diagram Features
More informationFeatures. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationFeatures. = +25 C, Vdd = 5V, Vgg1 = Vgg2 = Open
v3.117 HMC441LM1 Typical Applications The HMC441LM1 is a medium PA for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram Vgg1, Vgg2:
More informationFeatures. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications The HMC244AG16 is ideal for: Telecom Infrastructure Military Radios, Radar & ECM Space Applications Test Instrumentation Functional Diagram Features Low Insertion Loss:.9 Non-Reflective
More informationFeatures. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V
v4.1217 HMC49LP4E Typical Applications This amplifier is ideal for use as a power amplifier for 3.3-3.8 GHz applications: WiMAX 82.16 Fixed Wireless Access Wireless Local Loop Functional Diagram Features
More informationCustomised Pack Sizes / Qtys. Support for all industry recognised supply formats: o o o. Waffle Pack Gel Pak Tape & Reel
Design Assistance Assembly Assistance Die handling consultancy Hi-Rel die qualification Hot & Cold die probing Electrical test & trimming Customised Pack Sizes / Qtys Support for all industry recognised
More informationFeatures. = +25 C, Vdd1, Vdd2 = +5V
v.11 HMC51 POWER AMPLIFIER, 5-2 GHz Typical Applications Features The HMC51 is ideal for use as a driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.91 HMC519 AMPLIFIER, 1-32 GHz Typical Applications The HMC519 is ideal for use as either a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationHMC457QS16G / 457QS16GE
v3.97 HMC47QS16G / 47QS16GE Typical Applications The HMC47QS16G / HMC47QS16GE is ideal for applications requiring a high dynamic range amplifi er: CDMA & W-CDMA GSM, GPRS & Edge Base Stations & Repeaters
More informationFeatures. = +25 C, Vdd 1, 2, 3, 4 = +3V
Typical Applications Functional Diagram v.3 The HMC5 is ideal for use as a LNA or driver amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationHMC5805ALS6 AMPLIFIERS - LINEAR & POWER - SMT. Typical Applications. Features. Functional Diagram
HMC585ALS6 v2.517 GaAs phemt MMIC.25 WATT POWER AMPLIFIER DC - 4 GHz Typical Applications The HMC585ALS6 is ideal for: Test Instrumentation Microwave Radio & VSAT Military & Space Telecom Infrastructure
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationHMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
More informationHMC465 AMPLIFIERS- DRIVERS & GAIN BLOCKS - CHIP. GaAs phemt MMIC MODULATOR DRIVER AMPLIFIER, DC - 20 GHz. Electrical Specifications, T A.
v9.114 DRIVER AMPLIFIER, DC - 2 GHz Typical Applications The wideband driver is ideal for: OC192 LN/MZ Modulator Driver Telecom Infrastructure Test Instrumentation Military & Space Functional Diagram Features
More informationFeatures dbm
v9.917 HMC441 Typical Applications Features The HMC441 is ideal for: Point-to-Point and Point-to-Multi-Point Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram Gain:.5 db Saturated
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationFeatures OUT E S T CODE. = +25 C, Vdd= 8V, Idd= 60 ma*
E S T CODE E S T CODE v1.818 HMC6 AMPLIFIER, DC - 2 GHz Typical Applications Features The HMC6 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space
More informationFeatures. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.514 MIXER, 2.5-7. GHz Typical Applications The is ideal for: WiMAX & Fixed Wireless Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationFeatures. = +25 C, Vdd = 5V, Idd = 200 ma*
v3.13 HMC9 Typical Applications The HMC9 is ideal for use as either a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Functional Diagram Features Noise
More informationFeatures. = +25 C, Vdd = 5V, Idd = 85 ma*
Typical Applications The is an ideal gain block or driver amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Functional Diagram Features Saturated Power: +23 dbm @ 27% PAE Gain: db
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v3.917 Typical Applications Features The HMC17 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationFeatures. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz GHZ. Input Return Loss* GHZ 10 db
v6.316 MMIC 4-BIT DIGITAL Typical Applications The HMC43LC4B is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Functional Diagram Features Low RMS Phase Error:
More informationHMC998. Amplifiers - Linear & Power - Chip. GaAs phemt MMIC 2 WATT POWER AMPLIFIER, GHz. Electrical Specifications, T A.
v1.811 2 WATT POWER AMPLIFIER,.1-22 GHz Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Military & Space Telecom Infrastructure Fiber Optics Functional Diagram
More informationFMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
More informationFeatures. = +25 C, Vdd =+28V, Idd = 850 ma [1]
v1.413 HMC87F POWER AMPLIFIER, 2 - GHz Typical Applications The HMC86F is ideal for Test Instrumentation General Communications Radar Functional Diagram Features High Psat: +38. dbm Power Gain at Psat:
More informationFeatures. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v03.15 Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Features Isolation: 55 @ 2 GHz 43 @ 6 GHz Insertion Loss: 1.6
More informationDC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT
More information