SXN15 48V SERIES. Dual output TÜV. High Efficiency DC/DC Converters
|
|
- Lenard Cain
- 5 years ago
- Views:
Transcription
1 SXN15 48V SERIES Dual output High efficiency topology, 86% typical at 5V/3.3V Wide operating temperature, up to and exceedingly 65ºC (natural convection) 9% to 11% output trim No minimum load Overvoltage protection Remote on/off Approvals to EN695 and UL/cUL195 Complies with ETS /2-3 Complies with ETS (input voltage and current requirements) Complies with ETS Available RoHS compliant The SXN15 is a new high efficiency open frame isolated 15 Watt converter series. The first two models in the series feature an input voltage range of 33 to 75VDC and are available in output voltages of 5V/3.3V and 3.3V/2.5V. The output voltage on each model is adjustable from 9% to 11% of the nominal value. Typical efficiencies for the models are 86% for the 5V/3.3V and 85% for the 3.3V/2.5V version. The SXN15 series has a remote on/off capability with active 'HI' and active 'LO' options available. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN695 and cul195, the SXN15 reduces compliance costs and time to market. [ 2 YEAR WARRANTY ] TÜV 1 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
2 SXA1 Series Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Input voltage - continuous V in (cont) V DC V in(+) - V in(-) Input voltage - peak/surge V surge VDC 2s max, non-repetitive Operating temperature T op ºC Measured at thermal reference points, see Note 1 Storage temperature T storage ºC Output power (5V/3.3V) Pout (max) 15 W Even when trimmed up by 1% Output power (3.3V/2.5V) P out (max) W Even when trimmed up by 1% All specifications are typical at nominal input Vin = 48V, full load under any resistive load combination at 25ºC unless otherwise stated. Input Characteristics Input voltage - operating V in (oper) V DC Input current - no load l in madc V in (min) - V in (max), enabled Input current - Quiescent l in (off) 2 25 madc Converter disabled Input voltage variation dv/dt 5 V/ms Complies with ETS3 132 Part 4.4 Inrush current (i 2 t) linrush 3 µa 2 s Complies with ETS3 132 Part 4.7, with recommended LISN Inrush current ratio I t /I m 19.5 Complies with ETS3 132 Part 4.7, with recommended LISN Input ripple rejection 45 db Frequency <1 khz Input fuse 2 A Slow Blow/Antisurge HRC recommended 2V Rating Turn On/Off Input voltage - turn on V in (on) V DC Input voltage - turn off V in (off) V DC Hysteresis 3 V DC Turn on delay - enabled, T delay msec With the enable signal asserted, then power applied (power) this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Turn on delay - power T delay msec V in = V in (nom), then enabled. applied, then enabled (enable) This is the time taken until the output voltage is within the total error band Rise time T rise.6 1. msec From 1% to 9%; full resistive load, no external capacitance 2 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
3 Signal Electrical Interface Characteristic - Signal Name Symbol Min Typ Max Units Notes and Conditions At remote/control ON/OFF pin See Notes 2 and 3 Open Collector or Equivalent See Application Note 116 for compatible remote on/off details Control pin open circuit voltage V ih V I ih = µa; open circuit voltage High level input voltage V ih 2 75 V Converter guaranteed ON when control pin is greater than V ih (min) High level input current I ih 1 µa Current flowing into control pin when pin is pulled high (max. at V ih = 75V) Acceptable high level I ih (leakage) -5 µa Acceptable leakage current from leakage current signal pin into the open collector driver (neg = from converter) Low level input voltage V ii 1.2 V Converter guaranteed off when control pin is less than V il (max) Low level input current I ii -1.4 ma V il =.4 V Low level input current I il (max) -1.5 ma V ii =. V; Reliability and Service Life Mean time between failure MTBF > 6, Hours MIL-HDBK-217F, V in = V in (nom) ; I out = I out (max); ambient 25ºC; ground benign environment Mean time between failure MTBF > 1,5, Hours per Bellcore TR-NWT-332 Issue 3, ground benign, temp. = 4ºC, V in = V in (nom), I out = I out (max) Mean time between failure MTBF 1,79, Hours Demonstrated. Expected service life Years Isolation Input to output test voltage 15 V DC Test duration 1s Input to output capacitance 1 pf Input to output resistance 1 MΩ Measured with 5 V DC Input to output insulation system Operational 3 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
4 SXA1 Series Other Specifications Switching frequency F sw 265 khz Fixed frequency (all other models) Weight 12 g Environmental Specifications Thermal performance ºC See Notes 1, 4 and individual derating curves Type Parameter Reference Test Level Notes and Conditions Air temperature Low IEC ºC All characteristics and parameters High IEC ºC extracted from ETS 3 19 Change IEC ºC to +65ºC classes 3.1, 3.2, 3.3, 3.4 and 3.5 T max. = +65ºC for T3.4 Relative humidity Low 1% High IEC % Condensation IEC to 1% Vibration IEC Class 3M5 Freq. velocity IEC Hz 5mm/s Freq. acceleration IEC Hz 1g Shock IEC Class 3M5 Acceleration IEC g Performance criteria: NP: Normal Performance: EUT shall withstand applied test and operate within relevant limits as specified without damage RP: Reduced Performance: EUT shall withstand applied test. Reduced performance is permitted within specified limits, resumption to normal performance shall occur at the cessation of the test LFS: Loss of Function (self recovery): EUT shall withstand applied test without damage, temporary loss of function permitted during test Unit will self recover to normal performance after test Referenced ETSI standards: ETS table 5 (1997): Public telecommunication network equipment, EMC requirements ETS (1996): Power supply interface at the input to telecommunication equipment: Part 2 operated by direct current (DC) ETR 283 (1997): Transient voltages at interface A on telecommunication direct current (DC) power distributions EMC Electromagnetic Compatibility Phenomenon Port Standard Test level Criteria Notes and conditions Immunity: ESD Enclosure EN kV contact As per ETS table 5 8kV air EFT DC power EN kV As per ETS table 5 4kV Signal EN kV As per ETS table 5 2kV Radiated field Enclosure EN V/m As per ETS table 5 Conducted DC power EN V As per ETS table 5 Signal EN V Signal line assumed < 3m in length Input transients DC power ETS ETR File Name: lf_sxn15d.pdf Rev: 29 Mar 26
5 EMC Electromagnetic Compatibility Phenomenon Port Standard Test level Criteria Notes and conditions Emission: Conducted DC power EN5522 Level A With recommended external filter for compliance bandwidth 2 khz to 3 MHz, as per ETS See Application Note 116 for details EN5522 Level B With recommended external filter for compliance bandwidth 2 khz to 3 MHz, as per ETS See Application Note 116 for details Signal EN5522 Level B Bandwidth 15kHz to 3MHz, as per ETS Radiated EN5522 Level B Bandwidth 3 MHz to 1 GHz, as per ETS Standards Compliance List Standard Category EN695 2 UL/cUL 195 3rd edition TÜV Rheinland EN695:2 Safety Agency Approvals Characteristic UL/cUL 195 File Number TÜV Rheinland Certificate No. E R Material Ratings Characteristic - Signal Name Notes and Conditions Flammability rating Material type UL94V- FR4 PCB Model Numbers Model Input Output Overvoltage Output Current Typical Number Voltage Voltage Protection (Max.) Efficiency SXN15-48D5-3V3J VDC 5V/3.3V 6.2V/4.2V 3A/4.5A 86% SXN15-48D3V3-2V5J VDC 3.3V/2.5V 4V/3V 3.4A/4.5A 85% RoHS Compliance Ordering Information The J at the end of the partnumber indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 5 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
6 SXA1 Series SXN15-48D5-3V3J Model Input Characteristics Input current - operating I in A DC V in = V in (nom) ; I out = I out (max.) ; V o = V o (nom) Input current - maximum I in (max.) A DC V in = V in (min) ; I out = I out (max.) ; V o = V o (nom) (measured at converter) Reflected ripple current I in (ripple) 1.8 ma RMS I out = I out (max.), measured 5 ma pk-pk with external filter. See Application Note 116 details Input capacitance - internal C input 1.5 µf Internal to converter filter Input capacitance - external C bypass µf Recommended customer bypass added capacitance SXN15-48D5-3V3J Model Electrical Characteristics - O/P Nominal set-point voltage Vo (nom) 5V V DC V in = V in (nom) ; I out = I out (nom) Vo (nom) 3.3V V DC Worst case condition over line, load, temperature and life Total regulation band Vo 5V V DC For all line, static load and Vo 3.3V V DC temperature until end of life Output current continuous Lout 5V 3. A DC Total output power must not Lout 3.3V 4.5 A DC exceed 15W Output current - short circuit I sc 5V 5 6 A rms Continuous, unit auto recovers I sc 3.3V A rms from short, V o < 1mV Output voltage - noise V p-p 5V 6 1 mv pk-pk Measurement bandwidth 2 MHz V rms 5V 2 3 mv rms See Application Note 116 for V p-p 3.3V 8 12 mv pk-pk measurement set-up details V rms 3.3V mv rms Maximum power split 75%/25% Cross regulation V cross 5V mv V cross 3.3V mv 6 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
7 SXN15-48D5-3V3J Model Electrical Characteristics - O/P Load transient response - (V 1 ) V dynamic 18 mv Peak deviation for 5% to 75% peak deviation (V 2 ) 1 step load, di/dt = 1 ma/µsec Load transient response - T recovery 1 µsec Settling time to within 1% of recovery output settling point voltage for 5% to 75% step load External load capacitance C ext 1, µf SXN15-48D5-3V3J Model Protection and Control Features Overvoltage clamp voltage V ov 5V V DC Non-latching. See Vov 3.3V V DC Application Note 116 for details Overcurrent limit inception I oc 5V A DC V o = 9% of V o (nom) I oc 3.3V A DC V o = 9% of V o (nom) Output voltage trim range 11 % Trim up (% of V o nom ) 9 % Trim down (% of V o nom ) See Application Note 116 for details of trim equations and trim curves Open sense voltage V DC No sense option SXN15-48D5-3V3J Model Efficiency Efficiency η % I out 5V = 5% Iout (max), I out 3.3V = 5% Iout (max), V in = V in (nom) Efficiency η % I out 5V = 25% I out (max), I out 3.3V = 25% I out (max), V in = V in (nom) 7 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
8 SXA1 Series SXN15-48D3V3-2V5J Model Input Characteristics Input current - operating I in ADC V in = V in (nom) ; P out = P out SXA1 (max.) Series ; 5% each output Input current - maximum I in (max.) ADC V in = V in (min) ; P out = P out (max.) ; 5% each output Reflected ripple current I in (ripple) 1.8 ma RMS I out = I out (max.), measured 5 ma pk-pk with external filter. See Application Note 116 details Input capacitance - C input 1.5 µf Internal to converter internal filter Input capacitance - C bypass µf Recommended customer External bypass added capacitance SXN15-48D3V3-2V5J Model Electrical Characteristics - O/P Nominal set-point voltage Vo (nom) 3.3V V DC V in = V in (nom) ; I out = I out (nom) Vo (nom) 2.5V V DC Worst case condition over line, load, temperature and life Total regulation band Vo 3.3V V DC For all line, static load and Vo 2.5V V DC temperature until end of life Output current continuous Lout 3.3V 3. A DC Total output power must not Lout 2.5V 4.5 A DC exceed 11.25W Output current - short circuit I sc 3.3V A rms Continuous, unit auto recovers I sc 2.5V A rms from short, V o < 1mV Output voltage - noise V p-p 3.3V 9 13 mv pk-pk Measurement bandwidth 2 MHz V rms 3.3V 3 45 mv rms See Application Note 116 for V p-p 2.5V 1 14 mv pk-pk measurement set-up details V rms 2.5V 35 5 mv rms Maximum power split 75%/25% Cross regulation V cross 3.3V mv V cross 2.5V mv 8 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
9 SXN15-48D3V3-2V5J Model Electrical Characteristics - O/P Load transient response - (V 1 ) V dynamic 15 mv Peak deviation for 5% to 75% peak deviation (V 2 ) 1 step load, di/dt = 1 ma/µsec Load transient response - T recovery 1 µsec Settling time to within 1% of recovery output settling point voltage for 5% to 75% step load External load capacitance C ext 1, µf SXN15-48D3V3-2V5J Model Protection and Control Features Overvoltage clamp voltage V ov V DC Non-latching Vov V DC See Application Note 116 Overcurrent limit inception I oc A DC V o = 9% of V o (nom) I oc A DC Output voltage trim range 11 % Trim up (% of V o nom ) 9 Trim down (% of V o nom ) See Application Note 116 for details of trim equations and trim curves Open sense voltage V DC No sense feature SXN15-48D3V3-2V5J Model Efficiency Efficiency η % I out 3.3V = 5% Iout (max), I out 2.5V = 5% Iout (max), V in = V in (nom) Efficiency η 78 8 % I out 3.3V = 25% I out (max), I out 2.5V = 25% I out (max), V in = V in (nom) 9 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
10 SXE15-48D3V3-2V5J Model SXN15 Dual Series SXA1 Series OUTPUT CURRENT (%) AMBIENT TEMPERATURE ( C) 33Vin - 75Vin 36Vin - 6Vin OUTPUT CURRENT (%) AMBIENT TEMPERATURE ( C) 33Vin - 75Vin 36Vin - 6Vin Figure 1: Derating Curve Load Condition 3V3-1% (Still Air) Figure 2: Derating Curve Load Condition 3V3-5% 2V5-5% (Still Air) 12 OUTPUT CURRENT (%) AMBIENT TEMPERATURE ( C) 33Vin - 75Vin 36Vin - 6Vin POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM Figure 3: Derating Curve Load Condition 3V3-25% 2V5-75% (Still Air) Figure 4: Derating Curve with Airflow for 1%-% Load Split POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM Figure 5: Derating Curve with Airflow for 7%-3% Load Split Figure 6: Derating Curve with Airflow for 5%-5% Load Split 1 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
11 SXE15-48D3V3-2V5J Model SXN15 Dual Series POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM Figure 7: Derating Curve with Airflow for 3%-7% Load Split Figure 8: Derating Curve with Airflow for %-1% Load Split OUTPUT CURRENT (A) OUTPUT CURRENT (A) Figure 9: V-1 Characteristic over Input Line (3V3 Output) Figure 1: V-1 Characteristic Over Input Line (2V5 Output) EFFICIENCY (%) INPUT VOLTAGE (V) EFFICIENCY (%) #1 1%, #2 % #1 5%, #2 5% #1 %, #2 1% Norm Line Iout1 GOES FROM MAX TO MIN AS Iout2 GOES FROM MIN TO MAX Figure 11: Efficiency vs. Line Figure 12: Cross Efficiency 11 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
12 SXE15-48D3V3-2V5J Model SXN15 Dual Series SXA1 Series EFFICIENCY (%) % 5% 1% OUTPUT POWER, % TO 1% (#1 % TO 5% + #2 % TO 5%) Norm Line Vin Figure 13: Efficiency vs. Load Figure14: Typical Start-up (Vout1) Vin Signal TIME (msec) Figure 15: Typical Start-up (Vout2) Figure 16: Remote On/Off Control (Vout1) Signal VOLTAGE (2mV/Div) TIME (1. µsec/div) Figure 17: Remote On/Off Control (Vout2) Figure 18: Output Ripple (Vout1) 12 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
13 SXE15-48D3V3-2V5J Model SXN15 Dual Series VOLTAGE (2mV/Div) TIME (1. µsec/div) Output #1 Output #2 Signal Figure 19: Output Ripple (Vout2) Figure 2: Typical Transient Response 75%-5% Load Step Change Output #1 Output #2 Signal Vout1 (V) Iout2 (A), 1% <---> % Iout1 (A), % <---> 1% Vout2 (V) #1, 1% Power #2, 1% Power Figure 21: Typical Transient Response 5%-75% Load Step Change Figure 22: Cross Regulation at Pout Max File Name: lf_sxn15d.pdf Rev: 29 Mar 26
14 SXE15-48D5-3V3J Model SXN15 Dual Series OUTPUT CURRENT (%) AMBIENT TEMPERATURE ( C) 33Vin - 75Vin 36Vin - 6Vin OUTPUT CURRENT (%) AMBIENT TEMPERATURE ( C) 33Vin - 75Vin 36Vin - 6Vin Figure 23: Derating Curve Load Condition 5V-1% (Still Air) Figure 24: Derating Curve Load Condition 5V-5% 3V3-5% (Still Air) 12 OUTPUT CURRENT (%) AMBIENT TEMPERATURE ( C) 33Vin - 75Vin 36Vin - 6Vin POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM Figure 25: Derating Curve Load Condition 5V-25% 3V3-75% (Still Air) Figure 26: Derating Curve with Airflow for 1%-% Load Split POWER DISSIPATION (%) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM POWER DISSIPATION (%) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM AMBIENT TEMPERATURE ( C) AMBIENT TEMPERATURE ( C) Figure 27: Derating Curve with Airflow for 7%-3% Load Split Figure 28: Derating Curve with Airflow for 5%-5% Load Split 14 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
15 SXE15-48D5-3V3J Model SXN15 Dual Series SXA1 Series POWER DISSIPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM POWER DISSAPATION (%) AMBIENT TEMPERATURE ( C) Natural Convection Simulation 1LFM 2LFM 3LFM 4LFM Figure 29: Derating Curve with Airflow for 3%-7% Load Split Figure 3: Derating Curve with Airflow for %-1% Load Split OUTPUT CURRENT (A) OUTPUT CURRENT (A) Figure 31: V-1 Characteristic over Input Line (5V Output) Figure 32: V-1 Characteristic Over Input Line (3V3 Output) EFFICIENCY (%) INPUT VOLTAGE (V) EFFICIENCY (%) #1 1%, #2 % #1 5%, #2 5% #1 %, #2 1% Iout1 GOES FROM MAX TO MIN AS Iout2 GOES FROM MIN TO MAX Figure 33: Efficiency vs. Line Figure 34 Cross Efficiency 15 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
16 SXE15-48D5-3V3J Model SXN15 Dual Series EFFICIENCY (%) % 5% 1% OUTPUT POWER, % TO 1% (#1 % TO 5% + #2 % TO 5%) Vin Figure 35: Efficiency vs. Load Figure 36: Typical Start-up (Vout1) Vin Signal Figure 37 Typical Start-up (Vout2) Figure 38: Remote On/Off Control (Vout1) Signal VOLTAGE (2mV/Div) TIME (1. µsec/div) Figure 39: Remote On/Off Control (Vout2) Figure 4: Output Ripple (Vout1) 16 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
17 SXE15-48D5-3V3J Model SXN15 Dual Series VOLTAGE (2mV/Div) TIME (1. µsec/div) Output #1 Output #2 Signal Figure 41: Output Ripple (Vout2) Figure 42: Typical Transient Response 75%-5% Load Step Change Output #1 Output #2 Signal Vout1 (V) Iout2 (A), 1% <---> % Iout1 (A), % <---> 1% Vout2 (V) #1, 1% Power #2, 1% Power Figure 43: Typical Transient Response 5%-75% Load Step Change Figure 44: Cross Regulation at Pout Max File Name: lf_sxn15d.pdf Rev: 29 Mar 26
18 SXA1 Series 1.95 (48.39) All Dimensions in Inches [mm] TOP VIEW 1.1 (25.65) SIDE VIEW.335 (8.51).72 (1.83) 1.11 (2.79).82 (2.83).2 (.51) (3.5).7 (1.78) Tolerance: ±.15 (±.38) Recommended Land & Hole Pattern BOTTOM VIEW.84 (21.37).197 (5.) (26.19) (5.).15 (2.67).32 (7.67) (28.85) (37.67) 1.68 (42.67) (25.91).347 (8.81).8 (2.32).13 (3.3) (43.31).11 (2.79) Pin Connections Pin No. Function 1 V1+ 2 Com 3 V2+ 4 Trim 5 N/C 6 N/C 7 N/C 8 On/Off 9 N/C 1 Vin - 11 Vin + Figure 45: Dimensions and Pinout 18 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
19 Note 1 Hot spot temperature is defined as the highest temperature measured at any one of the specified temperature hotspot checkpoints. See Figure 3: Hotspot temperature check points. Note 2 The control pin is referenced to Vin-. Note 3 The SXN15 features Active High Remote ON/OFF as standard. An Active Low Remote ON/OFF version is also available. To order the Active Low version of the SXN15-48D5-3V3J please add the suffix -R towards the end of the part number, i.e. SXN15-48D5-3V3-RJ. As part numbers cannot exceed 18 characters when ordering the Active Low version of the SXN15-48D3V3-2V5J please add the suffix R towards the end of the part number, i.e. SXN15-48D3V3-2V5RJ. Figure 46: Hot Spot Locations on all Models Note 4 Thermal reference set up: Unit mounted centrally on a 2mm x 24 mm testboard. Testboard is mounted vertically in a fully enclosed 3mm x 3mm x 3mm testbox. Ambient temperature measured at the bottom of the textbox. Altitude sea level. For test details and recommended set-up see Application Note 116. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals File Name: lf_sxn15d.pdf Rev: 29 Mar 26
20 NORTH AMERICA EUROPEAN LOCATIONS IRELAND AUSTRIA FAR EAST LOCATIONS sales.asia@artesyn.com HONG KONG Longform Datasheet Artesyn Technologies The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 2 File Name: lf_sxn15d.pdf Rev: 29 Mar 26
0.8V Vin Single output
SIL15E-12V SERIES 0.8V - 3.63Vin Single output 15A Current rating Input voltage range: 10.0V - 14.0V Output voltage range: 0.8V - 3.63V Ultra high efficiency: 94% @ 12Vin and 3.3Vout Extremely low internal
More informationSMT10E Series. 3.0 Vin to 5.5 Vin Single output. SMT10E Series 10 A DC-DC Converter E Class Non-Isolated
SMT10E Series 3.0 Vin to 5.5 Vin Single output 10 A Current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely
More informationSIL20C SERIES. Single Output. SIL20C Series 20 A DC-DC Converter C Class Non-Isolated
SIL20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationSMT20C SERIES. Single Output TÜV. SMT20C Series 20 A DC-DC Converter C Class Non-Isolated
SMT20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
More informationSingle negative output
SIL25C SERIES Single negative output Trim range (-4.5 Vdc to -5.5 Vdc) High power density design means reduced board space requirement Remote sense Power good output signal (open collector) Operating ambient
More informationQUARTER-BRICK SERIES Single Output Performance Products
Quarter-Brick Series 100 A DC-DC QUARTER-BRICK SERIES Single Output Performance Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output
More informationQUARTER-BRICK SERIES Single Output Value Products
Quarter-Brick Series 50 A DC-DC QUARTER-BRICK SERIES Single Output Value Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output power
More informationEXQ125 48V SERIES. Single Output. Special Features
EXQ125 48V SERIES Embedded Power for Business-Critical Continuity EXQ125 48V SERIES 1 of 36 Total Power: 1 W Input Voltage: 33-75 VDC # of Outputs: Single Special Features High efficiency topology, 91%
More informationSIL20C2 Series Single Output
SIL20C2 Series 20 A DC-DC SIL20C2 Series Single Output Adjustable output voltage (0.59-5.1 V, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for
More informationQUARTER-BRICK QUARTER-BRICK SERIES. Single Output Ultra Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 28 Total Power: 150-200W Total Power: -- Input Voltage: 36-75Vdc Input Voltage: -- # of Outputs: Single Output
More informationEIGHTH-BRICK SERIES. Single Output Value Products. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity 1 of 31 EIGHTH-BRICK SERIES Total Power: 50 W Input Voltage: 36-75 VDC # of Outputs: Single Special Features High efficiency topology
More informationCXA20 SERIES. Single and dual output. Special Features
CXA20 SERIES Single and dual output Embedded Power for Business-Critical Continuity CXA20 SERIES 1 of 21 Total Power: 20 W Input Voltage: 18-75 VDC # of Outputs: Single and Dual Special Features 4:1 input
More informationEIGHTH-BRICK SERIES. 24 V Input, Single Output. Special Features
EIGHTH-BRICK SERIES Embedded Power for Business-Critical Continuity EIGHTH-BRICK SERIES 1 of 15 Total Power: 66 W Input Voltage: 18-36 VDC # of Outputs: Single Special Features High efficiency topology
More informationLDO03C SERIES. Single Output. LDO03C Series 3 A DC-DC C Class Non-Isolated DC/DC Converter [ 2 YEAR WARRANTY ]
LDO03C SERIES Single Output 3 A current rating Input voltage range 3-13.8 V Adjustable output voltage 0.59-5.1 V Optional 3-pin model factory set Optional 5-pin model factory set with power good option
More informationQUARTER-BRICK SERIES. Dual Output Value Products. Special Features
QUARTER-BRICK SERIES Embedded Power for Business-Critical Continuity QUARTER-BRICK SERIES 1 of 32 Total Power: 116 W Input Voltage: 36-75 VDC # of Outputs: Dual Special Features Two independent outputs
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationCLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationCLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationPTH Vin single output. DC/DC CONVERTERS POLA Non-isolated 1. NEW Product
PTH0 DC/DC CONVERTERS POLA Non-isolated 0 A output current V input voltage Wide-output voltage adjust. Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to.8 Vdc for suffix L Auto-track sequencing* Margin up/down
More informationElectrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
More informationCLP0224 Open Frame Power Supply Vac input; 24Vdc output; 200W Output Power
Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 37.25 mm (2 in x 4 in x 1.47 in) with density of 18 W/in 3 Universal AC Input Range (90 264VAC)
More informationESB Series Embedded EMC Filter Up to 40W converter
Features High Ffficiency up to 91% 2:1 / 4:1 Ultra-Wide input range Compact size 1.6 x 1.0 x 0.4 & 1.6 x 1.0 x 0.5 Standard DOSA pin out; Fully replaceable with 2 x1 standard case Metal Case Six-Sided
More informationDSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More information(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
More informationQME48T40 DC-DC Series Data Sheet VDC Input; A Output
Applications Telecommunications Data communications Wireless communications Servers, Workstations Benefits High efficiency no heat sink required Higher current capability at 70 ºC than most competitors
More informationElectrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
More information1 V/ms Undervoltage lockout: V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin
PTH0 SERIES PTH0 Vin Total Power: 55 Watts # of Outputs: Single Special Features 0 A output current V input voltage Wide-output voltage adjust. Vdc - 5.5 Vdc for suffix W & 0.8 Vdc -.8 Vdc for suffix L
More informationOVP 2:1. Wide Range. Protection
10W, Wide Input Range DIP, Single & Dual Output DC/DC s Key Features High Efficiency up to 88 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range CSA9-1 Safety Approval Complies with EN522 Class A
More informationDN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage
More information36-75 Vdc DC/DC converter Output up to 30 A/90 W
PKB 4000 Series 36-75 Vdc DC/DC converter Output up to 30 A/90 W Contents Product Program...................... 2 Mechanical Information................ 3 Absolute Maximum Ratings............. 4 Input...............................
More information420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
More informationNote1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
More informationPM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
More informationMIW3000 Series EMI. 5-6W, Wide Input Range DIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
-6W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 10 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range UL19 Safety Approval Complies with EN22 Class A Temperature Performance
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationLB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
More informationEfficiency (typ.) (Range) Load VDC VDC ma ma(typ.) ma(typ.) μf % MCWI05-12S
FEATURES Smallest Encapsulated 5W Ultracompact SIP8 Package Ultrawide 4 : 1 Input Voltage Range Fully Regulated Output Voltage I/O Isolation 1500 VDC Operating Ambient Temp. Range40 to 75 No Min. Requirement
More informationhttp://www.mmtmachrone.com 96D SERIES FEATURES: 30W DIL PACKAGE Recognized By UL 60950-1 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOMIZED SOLUTIONS AVAILABLE RoHS
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationMI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers. Key Features: Electrical Specifications
MI2500RU Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers Electrical Specifications Key Features: 25W Output Power 4:1 Input Voltage Range Compact 1 x 1 Inch Case 1,500 VDC Isolation 12 Standard
More informationSTB Series 2:1 & 4:1 Vin range / up to 60W 1/16 Brick
2:1 & 4:1 Vin range / up to W 1/16 Brick Features Industry-Standard DOSA pin out 4:1 / 2:1 Ultra-Wide input range High Ffficiency 91%@ 5V (SR topology) Compact size 1.49 x 1.46 x.5 Metal Case Six-Sided
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationMI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:
MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency
More information60 Watt Triple Output Half Brick DC/DC Converter
VKP60xT Corporate: Corporate: www.cdtechno.com www.cdtechno.com 60 Watt Triple Output Half Brick DC/DC Converter 18-40 & 33-75V Input Range Each Channel Independently Current Limited High Efficiency: 87%
More informationThis convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
More informationNLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
More informationThe MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
More informationFor more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
More informationElectrical Specifications
Series 0 Watts C-Class Non-Isolated SXX06E Rev. 08.0.06 Page of 2 of Total Power: 0 Watts Input Voltage: 3-3.8 Vdc No. of s: Single Special Features 0 A current rating Adjustable output voltage: 0.9 -.
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationPTH03010Y & PTH05010Y PTH12010Y. Vin increasing Vin decreasing PTH05010Y PTH12010Y PTH12010Y
PTHxx00Y 3.3/5/ Rev. 3.3.09_3 of 5 Total Power: Watts # of Outputs: Single Special Features bus termination output (output the system V REF ) 5 A output current 3.3, 5, or Vdc input voltage DDR and QDR
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More informationFED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More information(DOSA) VDC, 5.5 A.
Features Industry-standard pinout Output: 15 V at 5.5 A, 82.5W max. No minimum load required Low height - 0.374 (9.5mm) max. Basic Insulation Withstands 100 V input transients Fixed-frequency operation
More information150 WATT QSW DC/DC CONVERTERS
Description The 4:1 Input Voltage 150 Watt Single QSW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or
More information500 WATT MXW SERIES DC/DC CONVERTERS
4:1 Input voltage range High power density Small size 2.4 x 2.5 x 0.52 Efficiency up to 95.7% Excellent thermal performance with metal case Over-Current and Short Circuit Protection Over-Temperature protection
More informationECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
More informationPTH03060Y & PTH05060Y PTH12060Y. Vin increasing Vin decreasing PTH05060Y PTH12060Y PTH12060Y
3.3/5/ of 5 Total Power: Watts # of Outputs: Single Special Features V TT bus termination output (output the system V REF ) 0 A output current 3.3, 5 or Vdc input voltage DDR and QDR compatible ON/OFF
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More information360 WATT MTW SERIES DC/DC CONVERTERS
Description The 4:1 Input Voltage 360 Watt Single MTW DC/DC converter provides a precisely regulated dc output. The output voltage is fully isolated from the input, allowing the output to be positive or
More informationPEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
3W, Wide Input Range DIP, Single & DC/DC s Key Features Efficiency up to 82 Isolation MTBF > 1,000,000 Hours 2:1 Wide Input Range Low Cost Complies with EN022 Class A Temperature Performance -2 to +71
More informationNetworking Computers and Peripherals Telecommunications
The 0RCY-60U12x is part of the isolated DC/DC converters that operate from a wide input range (18 VDC - 75 VDC) and can cover both 24 Vin and 48 Vin input range. These units will provide up to 84 W of
More informationPOWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
More informationFED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly
More informationRPP20-W. Features ICE Technology* POWERLINE+ 20 Watt 4:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C Minimum Temp. UL Certified Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationPTV Vin single output. DC-DC CONVERTERS POLA Non-isolated 1. NEW Product
DC-DC CONVERTERS POL Non-isolated 1 16 output current 12 V input voltage Wide-output voltage adjust 1.2 Vdc to 5.5 Vdc for suffix W and 0.8 Vdc to 1.8 Vdc for suffix L uto-track sequencing* Pre-bias start-up
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationElectrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
More informationCV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters
DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationSeries AM50E-NZ 50 Watt DC-DC Converter
FEATURES: Wide Input range 2:1 Input to Output Isolation of 1500 High Efficiency up to 93% Input Over Voltage and Under Voltage Lockout Remote On/Off Control Output OVP, OCP & SCP Trim Adjustment Operating
More informationEfficiency (typ.) (Range) Max. Load VDC VDC ma ma ma(typ.) ma(typ.) μf % MJWI10-24S033
FEATURES Package Size 1.0 x1.0 x0.4 Ultrawide 4:1 Input Range High Efficiency up to 87% Operating Temp. Range 40 C to 80 C I/Oisolation Voltage 1500VDC Remote On/Off Control Input Filter complies to EN55022,Class
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationFeatures. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter
Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationSE014S110 Power Module; dc-dc Converter: 48 Vdc Input, 110 Vdc Output, 14 W
Data Sheet SE014S110 Power Module; dc-dc Converter: Features The SE014S110 Power Module uses advanced, surface-mount technology and delivers high-quality, compact, dc-dc conversion at an economical price.
More informationHigh power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
More informationFeatures. Regulated Converter RAC Watt Single Output. AC/DC Converter
Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II
More informationFeatures. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationDC/DC Converter VRA_YMD-6WR3 & VRB_YMD-6WR3 Series
6W isolated - converter in YMD package Wide input voltage and regulated dual/single output CB Patent Protection RoHS FEATURES Wide 2:1 input voltage range High efficiency up to 88% No-load power consumption
More informationThe MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
More informationPXD10-Single Output DC/DC Converter
PXD10-Single Output DC/DC Converter 9 to 18 Vdc, 18 to 36 Vdc and 36 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 10W Features Single output current up to 2A 10 watts maximum output power 2:1 wide input
More informationOutput Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
More informationPXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
More informationMAX. OUTPUT POWER 24/48/72/96/110 VDC 5 VDC 6 A 30 W 82% 0RQB-30Y05L. 0 R QB - 30 Y 05 L y. Output Power. Input Range
The 0RQB-30Y05L is an isolated DC/DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage
More information0RCY-F0S10x Isolated DC-DC Convert
0RCY-F0S10x Isolated DC-DC Convert The 0RCY-F0S10x is an isolated DC/DC converter that operate from a nominal 50 V/54 V source. This converter is intended to provide isolation and step down to generate
More informationParameter Condition Min. Typ. Max. Internal Input Filter. refer to line derating graph on PA-4 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input 85-35VAC 3W PCB mount package
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More information