Indian Institute of Technology Bombay
|
|
- Paulina Patterson
- 5 years ago
- Views:
Transcription
1 Specifications for High Resolution Scanning Probe Microscope Item Essential measuring modes with complete hardware and software. All the modes should be demonstrated during installation & training Scanners Specifications required Gentle force up to 50pN regulated high resolution imaging mode for delicate and soft sample in both air and liquid with control hardware and software Force Volume Microscopy AFM Contact mode in both air and liquid XY resolution: tip size(typically 5nm), Z resolution: system noise floor (typically 0.03nm) Non-Contact /Intermittent contact mode/tapping mode in both air and liquid XY resolution: tip size (typically 2-5nm), Z resolution (typically 0.03nm) Lateral Force Microscopy same as contact mode Force Spectroscopy force sensitivity: thermal noise of cantilever, 10pN Phase Imaging XY resolution: tip size (typically 2-5nm), phase sensitivity:1 mili-degree Magnetic Force Microscopy XY resolution: tip size(typically 10-15nm) Piezo Response Force Microscopy XY resolution: tip size(typically 10-15nm) can record inplane PFM and out of plane PFM simultaneously NanoLithography software can control probe movement in XYZ with force feedback Nanoindentation tapping mode brings the probe to sample surface gently, and use contact mode to ramp force curve to obtain better force control. Hardness and Modulus can be obtained. Electrostatic Force Microscopy XY resolution: tip size (typically 10-15nm) Current Sensing Microscopy XY resolution: tip size (typically 10nm). Current sensitivity 1pA or 50fA, depending amplifier used. Point & shoot force mapping user defined locations through graphic interface. Force spectroscopy is the same as above mentioned STM atomic resolution Two separate scanners including Large area and Small area high resolution scanner must be provided. Large Area Scanner with XYZ scan range 90µm x 90µm X 5 µm with Z noise < 0. 3Å RMS Small area scanner should have XYZ scan range 8μm x 8 μm x 2.5 μm with Z noise 0.3Å RMS The small area scanner should demonstrate atomic resolution images on atomic lattice structures [e.g. Mica] Microscope Optics Liquid Cell Sample stage Controller Microscope optics must include 5 Megapixel Camera through which the tip-sample position can be observed. In addition the optics should provide optical imaging specifications as mentioned below for initial optical imaging to identify locations for SPM. If the integrated optics with SPM cannot provide these specifications, it can be quoted as a separate unit. Liquid Cell for contact mode & intermittent/tapping mode imaging in fluids The sample stage must accommodate sample with at least 10 mm X 10 mm and 5mm thickness -Latest high speed controller with 5000 X 5000 pixel resolution, with 8 channels recorded simultaneously, and at least three of more inbuilt lock-in amplifiers -Tuning of cantilever resonance upto 2 MHz -Real time adjustable scan rate, size, offset, bias voltage & current
2 Light source and detector Computer Low coherence laser light source and scanner compatible with low coherence laser should be provided -Latest computer with windows based operating system and dual monitors -Preferably Intel core i7 quad processor or equivalent processor, -4 GB RAM or higher -Internal hard drive space of 500 GB or higher capacity in two partitions -operating system win xp or higher -USB drive and CD/DVD burner for backup-storage of image data. Monitor Software 30 LCD monitor must be provided, confliction with computer configuration where dual monitors are stated -Windows based software for controlling the SPM, image acquisition and processing. -Image processing software must have the common image processing features like surface roughness analysis, etc. -data export to ascii, bmp, jpg, tiff -Must include free AFM software upgrades for the life of the instrument Antivibration Table and Acoustic isolation Environmental Chamber Cantilever Holder Probes Active air filled anti-vibration table with pneumatic assembly must be provided, hanging dead weight granite will not be accepted Hermetically sealed environmental chamber with purge ports for inlet/outlet of gases must be provided Cantilever holder for scanning in fluid must be provided EFM cantilever holder must be provided Conductive mode cantilever holder must be provided MFM probes- 10 No s Contact mode Probes 50 No s Tapping Probes- 100 No s Conductive mode Probes 20 No s Kelvin Force Probes 20 No s Calibration Samples Warranty PDMS Gel 2.5 MPa, 3.5 MPa mounted on magnetic sample disk 1 No s each Polystytrene 2.7 GPa sample premounted on a magnetic disk 1 No s Fused Silica 72.9 GPa sample premounted on a magnetic disk 1 No s Sapphire premounted on a magnetic sample disk for calibrating deflection sensitivity-1 No s HOPG 1No s Titanium roughness sample premounted on a magnetic disk -1 No s Two-component polymer sample mounted on a steel sample puck -1 No s Calibration Grid 10 µm 1 No s Calibration Grid 1µm 1 No s 12 months full system warranty after installation should be provided. Installation & Training All the imaging modes should be demonstrated by Application Scientist and onsite training
3 should be provided to 2 users. Temperature stage It must be possible to upgrade the system with Sample temperature control; covering the range of -35C up to 250C, and including a dedicated tip heater element. 1.0 Item:High magnification Digital Microscope 2.0 Description: TheOpto-Digital microscope will be high resolution upright motorized, compact, highly reliable. All operation of the instrument will be using touch panel or mouse etc. from inspection to measurement to analysis to final report. It will enable observation with higher image quality, enhanced operability, and extremely high reliability with guaranteed measurement precision. 4.0 Detailed Specifications of the Digital Microscope Sr.no. Unit/Part/ Description Specifications Comments 4.1 Total magnification 17X 9000X Including optical & digital zoom 4.2 Total zoom including digital 30X (Maximum) 4.2a. Optical Scheme Telecentric Optics assembly 4.3 Optical zoom 13.5X (Maximum) 4.4 Objective lens 1.25X, 2.5X, 5X, 10X, N.A. 0.3 W.D. 30 mm Minimum two lenses mounted together /turret mounted and quick manual change is possible. High quality optics free from aberrations
4 40X, N.A. 0.8 W.D. 4.5 mm 50XBDP, N.A. 0.5 W.D mm & flare. 4.5 Working distance 0.35mm (minimum) At highest magnification. * 4.6 NA FOV µm Depending upon the magnification* Depending upon the magnification* * Values to be provided for each objective lens Accuracy of magnification Repeatability of magnification Within +3% 3σn-1= +2% Required parametric & environmental conditions to be specified to 4.10 Illumination & light source (Reflection & Transmission mode) Embedded standard or High intensity source Bright field, Dark field LED. Camera 4.11 Image sensor 1/1.8 inch type, 2 MP( 18MP Equivalent in 3CCD mode ), Color CCD. Pixel size<5µm PeltierCooled detector, Other details viz. array size, Image size, sensitivity standard, A/D etc. to be provided Scan mode Progressive
5 4.13 Frame rate 15fps (min.) /27fps ( binning ) Focusing unit 4.14 Focus Auto 4.15 Stroke 95mm (minimum) 4.16 Resolution 0.01µm 4.17 Sample height 65mm Specimen stage & control unit Stroke Load capacity 100mmX100mm 3 kg Max Motorized. Manual stage operation & detail may be provided as an option. Moving stage should be, stable, vibration free, smooth and error free measurement at higher magnification. Vibration correction feature should be present Instrument controller Modular Image view &Measurement capabilities 4.21 Viewing mode 2D & 3D 3D view with extended focal image Measurement Technique Absolute and non-contact. Data to be derived from screen/sensor. Accuracy of the screen based measurement to be specified at various magnifications Measurement X=100 mm
6 range Y= 100 mm Z= 95 mm Resolution X= micron Y= micron Z= 1 micron Accuracy X= within 3% of measured values Y= within 3% of measured values Z= objective dependent Repeatability X=3σn-1=+-2% Y=3σn-1=+-2% Z= objective dependent, around 3% Screen LCD monitor Resolution 23, Touch panel. Full HD color LCD 1920(H)X1080(V)
7 Operation of the instrument Instrument Running time Image enhancing capabilities Optical Digital Software & tools Examination & measurement tool PC controlled touch panel, mouse, joy stick etc. Suitable for continuous use. -Bright field(bf), -Dark field (DF), -BF+DF (MIX) -Differential interference contrast (DIC) -Polarized -High dynamic range -Wide dynamic range -High contrast region Shall be dedicated and integrated tool/software providing all results and analysis in numerical as well as chart/graph/photo formats. Operations are focusing, Zooming, illumination control, object location, auto focus, auto gain etc. GUI & user friendly control panel. Operation in auto/semi auto mode shall have full functional manual override. Dark field with 4 segment LED Illuminator. Image enhancing capabilities are essential for better visibility, best image selection, easy detection of texture& defects, free from halation & glare and color enhancement and various image correction technique using image processing. 3 Mode GUI Tutorial / standard / operator Software function suitable for entry
8 level to expert user. Images, Results & Reports Composite Image Calibration & Traceability Measurements & analysis Multiple analysis & comparison Averaging/peak detection Report generation Calibration Traceability Panoramic image from seamless stitching of images desirable in order to acquire area larger than field of view. 2D, 3D measurements & result analysis. Shall be capable of multiple results analysis for online measurements as well as stored data and their comparison. Essential for precise measurement and analysis of coarsely defined element edges. Photographed images, snapshot & video, measured data & analysis, profiles, histograms & user ID information, comments, and point zoom are to be saved as well as printable. Shall be operator friendly and shall be possible on site. Exact procedure to be specified. Obtained result shall comply with standards certified and System is capable of Linear, surface, profile, and uneven surface, and area&volume measurement. Standards set with appropriate traceability detail for line width/height measurement may be quoted as option.
9 traceable by reputed international organization. Enclosure Suitable environmental enclosure. May be quoted as option.
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY
IIT Bombay requests quotations for a high frequency conducting-atomic Force Microscope (c-afm) instrument to be set up as a Central Facility for a wide range of experimental requirements. The instrument
More informationCutting-edge Atomic Force Microscopy techniques for large and multiple samples
Cutting-edge Atomic Force Microscopy techniques for large and multiple samples Study of up to 200 mm samples using the widest set of AFM modes Industrial standards of automation A unique combination of
More informationPark NX20 The leading nano metrology tool for failure analysis and large sample research.
The Most Accurate Atomic Force Microscope Park NX20 The leading nano metrology tool for failure analysis and large sample research www.parkafm.com The Most Accurate Atomic Force Microscope Park NX20 The
More informationZeta-300 3D OPTICAL PROFILER
Zeta-300 3D OPTICAL PROFILER Technology Toolkit Developed in 2007, the revolutionary Confocal Grid Structured Illumination (CGSI) is the powerful technology in all Zeta Optical Profilers but in a Zeta,
More informationZeta-20. Zeta3D OPTICAL PROFILER IMAGING THE IMPOSSIBLE
Zeta3D OPTICAL PROFILER Zeta-20 IMAGING THE IMPOSSIBLE TRUE COLOR 3D DIC BRIGHT FIELD DARK FIELD POLARIZED LIGHT IMAGE THROUGH TRANSMISSIVE IMAGE WHITE OR BLUE LED LIGHT SOURCE THIN FILM THICKNESS DIAMOND
More informationCamera Overview. Digital Microscope Cameras for Material Science: Clear Images, Precise Analysis. Digital Cameras for Microscopy
Digital Cameras for Microscopy Camera Overview For Materials Science Microscopes Digital Microscope Cameras for Material Science: Clear Images, Precise Analysis Passionate about Imaging: Olympus Digital
More informationThe Most Accurate Atomic Force Microscope. Park NX20 The leading nano metrology tool for failure analysis and large sample research.
The Most Accurate Atomic Force Microscope Park NX20 The leading nano metrology tool for failure analysis and large sample research www.parkafm.com Park Systems The Most Accurate Atomic Force Microscope
More informationCamera Overview. Digital Microscope Cameras for Material Science: Clear Images, Precise Analysis. Digital Cameras for Microscopy
Digital Cameras for Microscopy Camera Overview For Materials Science Microscopes Digital Microscope Cameras for Material Science: Clear Images, Precise Analysis Passionate about Imaging: Olympus Digital
More informationSUPRA Optix 3D Optical Profiler
SUPRA Optix 3D Optical Profiler Scanning White-light Interferometric Microscope SWIM Series Applications The SUPRA Optix is the latest development in the field of Scanning White-light Interferometry. With
More informationCamera Overview. Digital Microscope Cameras for Material Science: Clear Images, Precise Analysis. Digital Cameras for Microscopy
Digital Cameras for Microscopy Camera Overview For Materials Science Microscopes Digital Microscope Cameras for Material Science: Clear Images, Precise Analysis Passionate about Imaging: Olympus Digital
More informationNanosurf easyscan 2 FlexAFM
Nanosurf easyscan 2 FlexAFM Your Versatile AFM System for Materials and Life Science www.nanosurf.com The new Nanosurf easyscan 2 FlexAFM scan head makes measurements in liquid as simple as measuring in
More informationOptical Microscope. Active anti-vibration table. Mechanical Head. Computer and Software. Acoustic/Electrical Shield Enclosure
Optical Microscope On-axis optical view with max. X magnification Motorized zoom and focus Max Field of view: mm x mm (depends on zoom) Resolution : um Working Distance : mm Magnification : max. X Zoom
More informationIntroduction of New Products
Field Emission Electron Microscope JEM-3100F For evaluation of materials in the fields of nanoscience and nanomaterials science, TEM is required to provide resolution and analytical capabilities that can
More information- Near Field Scanning Optical Microscopy - Electrostatic Force Microscopy - Magnetic Force Microscopy
- Near Field Scanning Optical Microscopy - Electrostatic Force Microscopy - Magnetic Force Microscopy Yongho Seo Near-field Photonics Group Leader Wonho Jhe Director School of Physics and Center for Near-field
More informationKeysight 9500 AFM. Data Sheet
Keysight 9500 AFM Data Sheet System Overview The Keysight Technologies, Inc. 9500 AFM seamlessly integrates revolutionary new software, a new high-bandwidth digital controller, and a state-of-the-art mechanical
More informationSystematic Workflow via Intuitive GUI. Easy operation accomplishes your goals faster than ever.
Systematic Workflow via Intuitive GUI Easy operation accomplishes your goals faster than ever. 16 With the LEXT OLS4100, observation or measurement begins immediately once the sample is placed on the stage.
More informationAsylum Research. MFP-3D Infinity. Endless Applications. Unlimited Potential. Performance / Versatility / Support
MFP-3D Infinity AFM Asylum Research Endless Applications. Unlimited Potential. Performance / Versatility / Support MFP-3D Infinity AFM Asylum Research Endless applications. Unlimited potential. The Asylum
More informationLecture 20: Optical Tools for MEMS Imaging
MECH 466 Microelectromechanical Systems University of Victoria Dept. of Mechanical Engineering Lecture 20: Optical Tools for MEMS Imaging 1 Overview Optical Microscopes Video Microscopes Scanning Electron
More informationBringing Answers to the Surface
3D Bringing Answers to the Surface 1 Expanding the Boundaries of Laser Microscopy Measurements and images you can count on. Every time. LEXT OLS4100 Widely used in quality control, research, and development
More informationStandard Operating Procedure of Atomic Force Microscope (Anasys afm+)
Standard Operating Procedure of Atomic Force Microscope (Anasys afm+) The Anasys Instruments afm+ system incorporates an Atomic Force Microscope which can scan the sample in the contact mode and generate
More informationMicroscopic Structures
Microscopic Structures Image Analysis Metal, 3D Image (Red-Green) The microscopic methods range from dark field / bright field microscopy through polarisation- and inverse microscopy to techniques like
More informationnanovea.com PROFILOMETERS 3D Non Contact Metrology
PROFILOMETERS 3D Non Contact Metrology nanovea.com PROFILOMETER INTRO Nanovea 3D Non-Contact Profilometers are designed with leading edge optical pens using superior white light axial chromatism. Nano
More informationOlympus LEXT OLS 4000 Confocal Laser Microscope
Olympus LEXT OLS 4000 Confocal Laser Microscope The Olympus LEXT OLS4000 is a confocal microscope capable of taking high-resolution 3D images. The magnification (Optical and Digital) of this microscope
More informationNanosurf Nanite. Automated AFM for Industry & Research.
Nanosurf Nanite Automated AFM for Industry & Research www.nanosurf.com Multiple Measurements Automated Got work? Nanosurf has the solution! The Swiss-based innovator and manufacturer of the most compact
More informationOLYMPUS Digital Cameras for Materials Science Applications: Get the Best out of Your Microscope
Digital Cameras for Microscopy Camera Overview For Materials Science Microscopes OLYMPUS Digital Cameras for Materials Science Applications: Get the Best out of Your Microscope Passionate About Imaging
More informationOutline: Introduction: What is SPM, history STM AFM Image treatment Advanced SPM techniques Applications in semiconductor research and industry
1 Outline: Introduction: What is SPM, history STM AFM Image treatment Advanced SPM techniques Applications in semiconductor research and industry 2 Back to our solutions: The main problem: How to get nm
More informationSPM The Industry s Performance Leader High Resolution Closed-loop System Fast, Easy Tip & Sample Exchange Versatility and Value Powerful Research
SPM The Industry s Performance Leader High Resolution Closed-loop System Fast, Easy Tip & Sample Exchange Versatility and Value Powerful Research Flexibility Atomic resolution STM image of highly-oriented
More informationManufacturing Metrology Team
The Team has a range of state-of-the-art equipment for the measurement of surface texture and form. We are happy to discuss potential measurement issues and collaborative research Manufacturing Metrology
More informationUNIVERSITY OF WATERLOO Physics 360/460 Experiment #2 ATOMIC FORCE MICROSCOPY
UNIVERSITY OF WATERLOO Physics 360/460 Experiment #2 ATOMIC FORCE MICROSCOPY References: http://virlab.virginia.edu/vl/home.htm (University of Virginia virtual lab. Click on the AFM link) An atomic force
More informationConfocal NEXIV VMZ-K Series. CNC Video Measuring System CONFOCAL NEXIV. VMZ-K Series
Confocal NEXIV VMZ-K Series CNC Video Measuring System CONFOCAL NEXIV VMZ-K Series 3D FOV Measurements Generated with Confocal Images The Confocal NEXIV VMZ-K series, a ground-breaking multifunctional
More informationFein. High Sensitivity Microscope Camera with Advanced Software 3DCxM20-20 Megapixels
Fein High Sensitivity Microscope Camera with Advanced Software 3DCxM20-20 Megapixels 3DCxM20 Camera Features High Sensitivity Camera This microscopy camera was designed with high sensitivity and ultra
More informationConfocal NEXIV VMZ-K Series. CNC Video Measuring System CONFOCAL NEXIV. VMZ-K Series
Confocal NEXIV VMZ-K Series CNC Video Measuring System CONFOCAL NEXIV VMZ-K Series The VMZ-K series enables microscopic height measurements using various objective lenses, with two models to choose from,
More informationHuvitz Digital Microscope HDS-5800
Huvitz Digital Microscope HDS-5800 Dimensions unit : mm Huvitz Digital Microscope HDS-5800 HDS-MC HDS-SS50 The world s first, convert the magnification from 50x to 5,800x with a zoom lens HDS-TS50 Huvitz
More informationPark NX-Hivac The world s most accurate and easy to use high vacuum AFM for failure analysis.
Park NX-Hivac The world s most accurate and easy to use high vacuum AFM for failure analysis www.parkafm.com Park NX-Hivac High vacuum scanning for failure analysis applications 4 x 07 / Cm3 Current (µa)
More informationInvestigate in magnetic micro and nano structures by Magnetic Force Microscopy (MFM)
Investigate in magnetic micro and nano 5.3.85- Related Topics Magnetic Forces, Magnetic Force Microscopy (MFM), phase contrast imaging, vibration amplitude, resonance shift, force Principle Caution! -
More informationAdvanced 3D Optical Profiler using Grasshopper3 USB3 Vision camera
Advanced 3D Optical Profiler using Grasshopper3 USB3 Vision camera Figure 1. The Zeta-20 uses the Grasshopper3 and produces true color 3D optical images with multi mode optics technology 3D optical profiling
More informationCompatible with Windows 8/7/XP, and Linux; Universal programming interfaces for easy custom programming.
NIRvana: 640LN The NIRvana: 640LN from Princeton Instruments is a scientific-grade, deep-cooled, large format InGaAs camera for low-light scientific SWIR imaging and spectroscopy applications. The camera
More informationQAQC LAB 589 Rappahannnock Drive White Stone Va TEL (866)
OCCHIO Pharma CLICK FOR PRODUCT DEMO 400 OCCHIO Pharma O. O. O. O. OCCHIO Pharma 4 G 00 NANO OCCHIO 500 Occhio 500nano TECHNICAL DATASHEET Reference code: OCC023 Occhio500nano Technical specifications
More informationSuper High Vertical Resolution Non-Contact 3D Surface Profiler BW-S500/BW-D500 Series
Super High Vertical Resolution Non-Contact 3D Surface Profiler BW-S500/BW-D500 Series Nikon's proprietary scanning-type optical interference measurement technology achieves 1pm* height resolution. * Height
More informationMeasurement of Microscopic Three-dimensional Profiles with High Accuracy and Simple Operation
238 Hitachi Review Vol. 65 (2016), No. 7 Featured Articles Measurement of Microscopic Three-dimensional Profiles with High Accuracy and Simple Operation AFM5500M Scanning Probe Microscope Satoshi Hasumura
More informationProudly serving laboratories worldwide since 1979 SPECIFICATIONS
www.ietltd.com Proudly serving laboratories worldwide since 1979 SPECIFICATIONS Scan RDI Specifications System Components Main analytical console Laser Module CRT Printer Data Manager Motorized stage (option)
More informationKEYENCE VKX LASER-SCANNING CONFOCAL MICROSCOPE Standard Operating Procedures (updated Oct 2017)
KEYENCE VKX LASER-SCANNING CONFOCAL MICROSCOPE Standard Operating Procedures (updated Oct 2017) 1 Introduction You must be trained to operate the Laser-scanning confocal microscope (LSCM) independently.
More informationNanoFocus Inc. Next Generation Scanning Probe Technology. Tel : Fax:
NanoFocus Inc. Next Generation Scanning Probe Technology www.nanofocus.kr Tel : 82-2-864-3955 Fax: 82-2-864-3956 Albatross SPM is Multi functional research grade system Flexure scanner and closed-loop
More informationLOW TEMPERATURE STM/AFM
* CreaTec STM of Au(111) using a CO-terminated tip, 20mV bias, 0.6nA* LOW TEMPERATURE STM/AFM High end atomic imaging, spectroscopy and manipulation Designed and manufactured in Germany by CreaTec Fischer
More informationAdvanced Nanoscale Metrology with AFM
Advanced Nanoscale Metrology with AFM Sang-il Park Corp. SPM: the Key to the Nano World Initiated by the invention of STM in 1982. By G. Binnig, H. Rohrer, Ch. Gerber at IBM Zürich. Expanded by the invention
More informationTechnical Benefits of the
innovation in microvascular assessment Technical Benefits of the Moor Instruments moorflpi-2 moorflpi-2 More Info: Measurement Principle laser speckle contrast analysis Measurement 85nm Laser Wavelength
More informationSurface Finish Measurement Methods and Instrumentation
125 years of innovation Surface Finish Measurement Methods and Instrumentation Contents Visual Inspection Surface Finish Comparison Plates Contact Gauges Inductive / Variable Reluctance (INTRA) Piezo Electric
More informationEXC500p-- PATHOLOGY MICROSCOPE. EXC500hd -- HD DIGITAL PATHOLOGY MICROSCOPE. EXC500r -- RESEARCH MICROSCOPE EXC500-LABORATORY SCOPE
EXC500p-- PATHOLOGY MICROSCOPE EXC500hd -- HD DIGITAL PATHOLOGY MICROSCOPE EXC500r -- RESEARCH MICROSCOPE EXC500-LABORATORY SCOPE The EXC500 Pathology and Laboratory Microscope is the most optically advanced
More informationOPTOFORM 40 ENGINEERING SPECIFICATIONS
OPTOFORM 40 The world s most competitively priced Ultra Precision Lathe specifically designed for manufacturing both INTRA-OCULAR LENSES and CONTACT LENSES. ENGINEERING SPECIFICATIONS Description Through
More informationCNC Video Measuring System NEXIV VMZ-K series. CNC Video Measuring System. Confocal Model
CNC Video Measuring System NEXIV VMZ-K series CNC Video Measuring System Confocal Model D FOV Measurements Generated with s A ground-breaking multifunctional video measuring system developed on the strength
More informationZeta-20. 3D Optical Profiler
Zeta-20 3D Optical Profiler KLA-Tencor pioneered the science of multi -mode metrology, packing fi ve powerful techniques into one compact opti cal package. Technology Toolkit Developed in 2007, the revolutionary
More informationTECHNICAL SPECIFICATION SCHEDULE
LAMPIRAN Q5 MEMBEKAL, MENGHANTAR, MEMASANG DAN KOMISYEN METALLURGICAL MICROSCOPE WITH COMPUTER ATTACHMENT KE P.P.KEJ. B AHAN & SUMBER MINERAL, UNIVERSITI SAINS MALAYSIA, KAMPUS KEJURUTERAAN Quotation No:
More informationMinimizes reflection losses from UV to IR; No optical losses due to multiple optical surfaces; Optional AR coating and wedge windows available.
SOPHIA: 2048B The SOPHIA : 2048B camera from Princeton Instruments (PI) is fully integrated, ultra-low noise 2048 x 2048, 15 µm pixel CCD camera designed expressly for the most demanding quantitative scientific
More informationAtomic Force Microscopy (Bruker MultiMode Nanoscope IIIA)
Atomic Force Microscopy (Bruker MultiMode Nanoscope IIIA) This operating procedure intends to provide guidance for general measurements with the AFM. For more advanced measurements or measurements with
More informationUniversity of Washington Molecular Analysis Facility
University of Washington Molecular Analysis Facility Apreo-S (Variable Pressure) is a Schottky Field Emission Scanning Electron Microscope (FESEM) that combines high- and low-voltage ultra-high resolution
More informationQuality Performance, Innovative Design
Dimensions Confocal Laser Scanning Biological Microscope Table size (mm): 1400(W) 800(D) * Table is not available from Olympus. Avoid placing the controller directly on the floor. Dimensions / Weight /
More information; A=4π(2m) 1/2 /h. exp (Fowler Nordheim Eq.) 2 const
Scanning Tunneling Microscopy (STM) Brief background: In 1981, G. Binnig, H. Rohrer, Ch. Gerber and J. Weibel observed vacuum tunneling of electrons between a sharp tip and a platinum surface. The tunnel
More informationCamera Overview. Olympus Digital Cameras for Materials Science Applications: For Clear and Precise Image Analysis. Digital Cameras for Microscopy
Digital Cameras for Microscopy Camera Overview For Materials Science Microscopes Olympus Digital Cameras for Materials Science Applications: For Clear and Precise Image Analysis Passionate about Imaging
More informationattosnom I: Topography and Force Images NANOSCOPY APPLICATION NOTE M06 RELATED PRODUCTS G
APPLICATION NOTE M06 attosnom I: Topography and Force Images Scanning near-field optical microscopy is the outstanding technique to simultaneously measure the topography and the optical contrast of a sample.
More informationPark NX10. The most accurate and easiest to use Atomic Force Microscope.
The most accurate and easiest to use Atomic Force Microscope www.parkafm.com Park Systems Enabling Nanoscale Advances The premiere choice for nanotechnology research Better data Park NX10 produces data
More informationLateral Force: F L = k L * x
Scanning Force Microscopy (SFM): Conventional SFM Application: Topography measurements Force: F N = k N * k N Ppring constant: Spring deflection: Pieo Scanner Interaction or force dampening field Contact
More informationSENSOR+TEST Conference SENSOR 2009 Proceedings II
B8.4 Optical 3D Measurement of Micro Structures Ettemeyer, Andreas; Marxer, Michael; Keferstein, Claus NTB Interstaatliche Hochschule für Technik Buchs Werdenbergstr. 4, 8471 Buchs, Switzerland Introduction
More informationDepartment of Physics
UNIVERSITY OF CALICUT Calicut University PO Thenjipalam, Malappuram Dist Kerala 673 635, India Department of Physics No. DP/46/FIST-II/2011 05/11/2011 TENDER NOTICE Sealed competitive tenders are invited
More informationattocfm I for Surface Quality Inspection NANOSCOPY APPLICATION NOTE M01 RELATED PRODUCTS G
APPLICATION NOTE M01 attocfm I for Surface Quality Inspection Confocal microscopes work by scanning a tiny light spot on a sample and by measuring the scattered light in the illuminated volume. First,
More informationOptical basics for machine vision systems. Lars Fermum Chief instructor STEMMER IMAGING GmbH
Optical basics for machine vision systems Lars Fermum Chief instructor STEMMER IMAGING GmbH www.stemmer-imaging.de AN INTERNATIONAL CONCEPT STEMMER IMAGING customers in UK Germany France Switzerland Sweden
More informationNanosurf easyscan 2 Your Modular Scanning Probe Microscopy System
Nanosurf Your Modular Scanning Probe Microscopy System www.nanosurf.com Perfect Modularity Nanosurf s easyscan series has gained worldwide popularity through its affordability, portability, and ease of
More informationThe Most Accurate Atomic Force Microscope. Park XE15 Power and versatility, brilliantly combined.
The Most Accurate Atomic Force Microscope Park XE15 Power and versatility, brilliantly combined. www.parkafm.com Park XE15 Increase your productivity with our powerfully versatile atomic force microscope
More informationMorphologi. Advanced image analysis for high sensitivity particle characterization. Particle size. Particle shape
Particle size Particle shape Morphologi detailed specification sheets from www.malvern.co.uk Introducing a new concept in image analysis The Morphologi high sensitivity particle analyzer is more than just
More informationMinimizes reflection losses from UV-IR; Optional AR coatings & wedge windows are available.
Now Powered by LightField PyLoN:2K 2048 x 512 The PyLoN :2K is a controllerless, cryogenically-cooled CCD camera designed for quantitative scientific spectroscopy applications demanding the highest possible
More informationR I T. Title: Wyko RST Plus. Semiconductor & Microsystems Fabrication Laboratory Revision: A Rev Date: 05/23/06 1 SCOPE 2 REFERENCE DOCUMENTS
Approved by: Process Engineer / / / / Equipment Engineer 1 SCOPE The purpose of this document is to detail the use of the Wyko RST Plus. All users are expected to have read and understood this document.
More information07 Setting Place a specimen, and select a fluorescence dye. The FV10i automatically selects the most suitable imaging conditions based on the fluorescence dye selection. Set Image mapping menu Just click
More information:... resolution is about 1.4 μm, assumed an excitation wavelength of 633 nm and a numerical aperture of 0.65 at 633 nm.
PAGE 30 & 2008 2007 PRODUCT CATALOG Confocal Microscopy - CFM fundamentals :... Over the years, confocal microscopy has become the method of choice for obtaining clear, three-dimensional optical images
More informationParticle size range (0.8 microns 1000 microns)
Reference code: OCC242-02 Occhio Flowcell FC200 M-HR Particle size range (0.8 microns 1000 microns) Technical specifications Working conditions Working temperature 5-40 C non condensing Power Supply 100-220
More informationUpgrade to Andor s high-resolution Luca EM R EMCCD; the new price/performance benchmark.
Features & benefits EMCCD Technology Ultimate in sensitivity from EMCCD gain. Even single photons are amplified above the noise. Full QE of the sensor is harnessed (visit www.emccd.com) Megapixel sensor
More informationAtomic Force Microscopes
Nanoscale Surface Characterization tomic Force Microscopes www.witec.de WITec tomic Force Microscopes Nanoscale Surface Characterization The WITec tomic Force Microscope (FM) module integrated with a research-grade
More informationLow Voltage Electron Microscope
LVEM 25 Low Voltage Electron Microscope fast compact powerful Delong America FAST, COMPACT AND POWERFUL The LVEM 25 offers a high-contrast, high-throughput, and compact solution with nanometer resolutions.
More informationLVEM 25. Low Voltage Electron Mictoscope. fast compact powerful
LVEM 25 Low Voltage Electron Mictoscope fast compact powerful FAST, COMPACT AND POWERFUL The LVEM 25 offers a high-contrast, high-throughput, and compact solution with nanometer resolutions. All the benefits
More informationCOFFEE LABORATORY WHITE STONE VA Tel (804)
COFFEE LABORATORY USA FOR THE PARTICLE SIZE ANALYSIS OF COFFEE GROUND COFFEE COFFEE BEAN GRADING CLICK HERE PRODUCT DEMONSTRAION Reference code: OCC63 Occhio Zephyr ESR Particle size range (30 microns
More informationMeasurement of Surface Profile and Layer Cross-section with Wide Field of View and High Precision
Hitachi Review Vol. 65 (2016), No. 7 243 Featured Articles Measurement of Surface Profile and Layer Cross-section with Wide Field of View and High Precision VS1000 Series Coherence Scanning Interferometer
More informationBeamscope-P8 Wavelength Range. Resolution ¼ - 45 ¼ - 45
Scanning Slit System Beamscope-P8 Typical Applications: Laser / diode laser characterisation Laser assembly development, alignment, characterisation, production test & QA. Lasers and laser assemblies for
More information100 khz and 2 MHz digitization rates Choose low speed digitization for low noise or high speed for fast spectral acquisition.
Now Powered by LightField PIXIS: 1 134 x 1 The PIXIS series from Princeton Instruments (PI) are fully integrated, low noise cameras with a 134 pixel format designed for quantitative scientific optical
More informationIdeal for display mura (nonuniformity) evaluation and inspection on smartphones and tablet PCs.
2D Color Analyzer Ideal for display mura (nonuniformity) evaluation and inspection on smartphones and tablet PCs. Accurately and easily measures the distribution of luminance and chromaticity. The included
More informationLow Voltage Electron Microscope
LVEM5 Low Voltage Electron Microscope Nanoscale from your benchtop LVEM5 Delong America DELONG INSTRUMENTS COMPACT BUT POWERFUL The LVEM5 is designed to excel across a broad range of applications in material
More informationSpecification for a Fully Automatic Meter Test Equipment for testing Three-phase/Single/Transformer operated/ reference Standard energy meters.
Specification for a Fully Automatic Meter Test Equipment for testing Three-phase/Single/Transformer operated/ reference Standard energy meters. Scope: This specification defines the requirement of a Three
More informationNOVA S12. Compact and versatile high performance camera system. 1-Megapixel CMOS Image Sensor: 1024 x 1024 pixels at 12,800fps
NOVA S12 1-Megapixel CMOS Image Sensor: 1024 x 1024 pixels at 12,800fps Maximum Frame Rate: 1,000,000fps Class Leading Light Sensitivity: ISO 12232 Ssat Standard ISO 64,000 monochrome ISO 16,000 color
More informationPICO MASTER 200. UV direct laser writer for maskless lithography
PICO MASTER 200 UV direct laser writer for maskless lithography 4PICO B.V. Jan Tinbergenstraat 4b 5491 DC Sint-Oedenrode The Netherlands Tel: +31 413 490708 WWW.4PICO.NL 1. Introduction The PicoMaster
More informationParallel Mode Confocal System for Wafer Bump Inspection
Parallel Mode Confocal System for Wafer Bump Inspection ECEN5616 Class Project 1 Gao Wenliang wen-liang_gao@agilent.com 1. Introduction In this paper, A parallel-mode High-speed Line-scanning confocal
More informationTransmission Electron Microscopy 9. The Instrument. Outline
Transmission Electron Microscopy 9. The Instrument EMA 6518 Spring 2009 02/25/09 Outline The Illumination System The Objective Lens and Stage Forming Diffraction Patterns and Images Alignment and Stigmation
More informationPark XE7 The most affordable research grade AFM with flexible sample handling.
Park XE7 The most affordable research grade AFM with flexible sample handling www.parkafm.com Park Systems The Most Accurate Atomic Force Microscope Park XE7 The economical choice for innovative research
More informationFast Laser Raman Microscope RAMAN
Fast Laser Raman Microscope RAMAN - 11 www.nanophoton.jp Fast Raman Imaging A New Generation of Raman Microscope RAMAN-11 developed by Nanophoton was created by combining confocal laser microscope technology
More informationUniversity of MN, Minnesota Nano Center Standard Operating Procedure
Equipment Name: Atomic Force Microscope Badger name: afm DI5000 PAN Revisionist Paul Kimani Model: Dimension 5000 Date: October 6, 2017 Location: Bay 1 PAN Revision: 1 A. Description i. Enhanced Motorized
More informationMeasuring systems for ironing rings and punches
Measuring systems for ironing rings and punches Equipment and proven technology for precision tooling measurement in beverage can industry RINGMASTER THE MASTER TOOL FOR RING MEASURE MENT RINGMASTER provides
More informationBruker Dimension Icon AFM Quick User s Guide
Bruker Dimension Icon AFM Quick User s Guide March 3, 2015 GLA Contacts Jingjing Jiang (jjiang2@caltech.edu 626-616-6357) Xinghao Zhou (xzzhou@caltech.edu 626-375-0855) Bruker Tech Support (AFMSupport@bruker-nano.com
More informationT:GENIUS GEL IMAGING AT A TOUCH
T:GENIUS GEL IMAGING AT A TOUCH The T:Genius is an integrated system for DNA and protein analysis and gel documentation. Based on the successful Syngene gel documentation range, the T:Genius features an
More informationPrepare Sample 3.1. Place Sample in Stage. Replace Probe (optional) Align Laser 3.2. Probe Approach 3.3. Optimize Feedback 3.4. Scan Sample 3.
CHAPTER 3 Measuring AFM Images Learning to operate an AFM well enough to get an image usually takes a few hours of instruction and practice. It takes 5 to 10 minutes to measure an image if the sample is
More informationJ. C. Wyant Fall, 2012 Optics Optical Testing and Testing Instrumentation
J. C. Wyant Fall, 2012 Optics 513 - Optical Testing and Testing Instrumentation Introduction 1. Measurement of Paraxial Properties of Optical Systems 1.1 Thin Lenses 1.1.1 Measurements Based on Image Equation
More informationMPI TS300-SE 300 mm Manual Probe System with ShielDEnvironment TM For accurate and reliable DC/CV, RF and mmw measurements
MPI TS300-SE 300 mm Manual Probe System with ShielDEnvironment TM For accurate and reliable DC/CV, RF and mmw measurements FEATURES / BENEFITS Universal Use Designed for wide variety of applications such
More informationHybridStage - Automated, large sample-area mapping made easy
HybridStage - Automated, large sample-area mapping made easy Motivation Crucial parameters that affect cell adhesion, morphogenesis, cell differentiation and cancer invasion include the molecular interactions
More informationFlow-Cell FC200S+ OCCHIO. The best solution for measuring suspensions,emulsions and foams
Y o u n e e d p r e c i s i o n, y o u w a n t m o r p h o l o g y OCCHIO Flow-Cell FC200S+ The best solution for measuring suspensions,emulsions and foams OCCHIO C C H I O Pharma F l o w - C e l l FC200S+
More informationOlympus Fluoview 1000S Spectral Confocal Microscope Introduction to the NRI-MCDB Microscopy Facility Spectral Confocal Microscope
Olympus Fluoview 1000S Spectral Confocal Microscope Introduction to the NRI-MCDB Microscopy Facility Spectral Confocal Microscope Improved Optics More Lasers 405 diode 440 diode 488 Argon 515 Argon 559
More information