In The Name of Almighty. Lec. 2: Sampling
|
|
- Spencer Singleton
- 5 years ago
- Views:
Transcription
1 In The Name of Almighty Lec. 2: Sampling Lecturer: Hooman Farkhani Department of Electrical Engineering Islamic Azad University of Najafabad Feb
2 A/D and D/A Conversion A/D Conversion D/A Conversion Reconstruction Digital in DSP Analog out D/A S/H Smoothing filter 2
3 Sampling Sampling is a common technical process. - E.g.: A movie consists out of a sequences of photographs (the samples). The sampling process determines the value of a signal on a predetermined frame of time moments. Sampling Frequency: f s Analog input signal Sampling circuit Sampling pulses Sampled version of input signal 3
4 Sampling in Time: Uniform Sampling with period T: Sampling a signal is equivalent to the mixing of the signal with a train of deltas. Note that the multiplication is a non-linear operation : (inherent non-linearity of Sampling Operation) 4
5 Sampling in Frequency Domain: Laplace transform of an infinite sequence of deltas is given by: Hence we have: The equation shows that the spectrum of x (nt) is the superposition of infinite replicas of the input spectrum. These replicas are centered at multiples of the sampling frequency being shifted along the f axis by: 5
6 Sampling in Frequency Domain: (a) Bilateral spectrum of a continuous-time signal. (b) Sampled spectrum by using fs/2 > f B 6
7 Aliasing Band Aliasing (a) Bilateral spectrum of a continuous-time signal. (c) Sampled spectrum by using fs/2 < f B 7
8 Another example for Aliasing: Reference: Pelgrom Book 8
9 Aliasing: Three analog signals: 1 MHz, 19 MHz and 39 MHz sine waves result after sampling with 20 Ms/s in the same sampled data sequence (dots) 9
10 Sampling Theorem (Nyquist Criterion) The sampling theorem states: In order to recover a signal, the sampling rate must be greater than twice the highest frequency in the signal. Stated as an equation, f sample > 2f a(max) where f sample = sampling frequency f a(max) = highest harmonic in the analog signal If the signal is sampled less than this, the recovery process will pr oduce frequencies that are entirely different than in the original sig nal. These masquerading signals are called aliases. 10
11 Anti-Aliasing Filter: The anti-aliasing filter is a low-pass filter that limits high frequencies in the input signal to only those that meet the requirements of the sa mpling theorem. Filtered analog freq uency spectrum Sampling frequency spectrum f f c f sample The filter s cutoff frequency, f c, should be less than ½ f sample. 11
12 Anti-Aliasing Filter: The anti-aliasing filter protects the information content of the signal. Use an antialiasing filter in front of every quantizer to reject unw anted interferences outside of the band of the interest (either low pass or band-pass)! Exercise: Do researches on these topics: 1. Undersampling the signals 2. Oversampling the signals 3. Non-uniform Sampling and its applications 12
13 Classes of sampling Nyquist-rate sampling (f s > 2. f sig.max ) - Nyquist data converters - In practice always slightly oversampled. Oversampling ((f s >> 2. f sig.max ) - Oversampled data converters - Anti-alias filtering is often trivial - Oversampling also helps reduce quantization noise (<ore lat er) Undersampling, subsampling (f s < 2. f sig.max ) - Exploit aliasing to mix RF/IF signals down to baseband - see e.g. Pekau & Haslett, JSSC 11/
14 From Analog Toward Digital After Limiting the bandwidth (BW) of the input signal (using a nti-aliasing filter), the first step in converting a signal to digital form is to use a sample-and-hold circuit. This circuit samples the input signal at a rate determined by a clock signal and holds the level on a capacitor until the next clock pulse. A positive half-wave from 0-10 V is shown in blue. The sample-and-hold circuit produces the staircase representati on shown in red. After Sampling A/D converts the data (see next lactures) 10 V 0 V 14
15 Summary Must obey sampling theorem f s > 2 f sig,max, Usually dictates anti-aliasing filter If sampling theorem is met, continuous time signal can be recovered from discrete time sequence without loss of information. Sample and Hold circuits can be implemented separately or jus t implemented as a part of the ADC. (This will be discussed lat er) 15
16 References Chapter 3 of Pelgrom s book. Chapter 1 (1.2) of Maloberti s book 16
EE 230 Lecture 39. Data Converters. Time and Amplitude Quantization
EE 230 Lecture 39 Data Converters Time and Amplitude Quantization Review from Last Time: Time Quantization How often must a signal be sampled so that enough information about the original signal is available
More informationAnalog and Telecommunication Electronics
Politecnico di Torino Electronic Eng. Master Degree Analog and Telecommunication Electronics D6 - High speed A/D converters» Spectral performance analysis» Undersampling techniques» Sampling jitter» Interleaving
More informationDigital Processing of
Chapter 4 Digital Processing of Continuous-Time Signals 清大電機系林嘉文 cwlin@ee.nthu.edu.tw 03-5731152 Original PowerPoint slides prepared by S. K. Mitra 4-1-1 Digital Processing of Continuous-Time Signals Digital
More informationSistemas de Aquisição de Dados. Mestrado Integrado em Eng. Física Tecnológica 2015/16 Aula 3-29 de Setembro
Sistemas de Aquisição de Dados Mestrado Integrado em Eng. Física Tecnológica 2015/16 Aula 3-29 de Setembro Aliasing Example fsig=101khz fsig=899 khz All sampled signals are equal! fsig=1101 khz 2 How to
More informationDigital Processing of Continuous-Time Signals
Chapter 4 Digital Processing of Continuous-Time Signals 清大電機系林嘉文 cwlin@ee.nthu.edu.tw 03-5731152 Original PowerPoint slides prepared by S. K. Mitra 4-1-1 Digital Processing of Continuous-Time Signals Digital
More informationFigure 1: Block diagram of Digital signal processing
Experiment 3. Digital Process of Continuous Time Signal. Introduction Discrete time signal processing algorithms are being used to process naturally occurring analog signals (like speech, music and images).
More informationEE247 Lecture 22. Figures of merit (FOM) and trends for ADCs How to use/not use FOM. EECS 247 Lecture 22: Data Converters 2004 H. K.
EE247 Lecture 22 Pipelined ADCs Combining the bits Stage implementation Circuits Noise budgeting Figures of merit (FOM) and trends for ADCs How to use/not use FOM Oversampled ADCs EECS 247 Lecture 22:
More informationFYS3240 PC-based instrumentation and microcontrollers. Signal sampling. Spring 2015 Lecture #5
FYS3240 PC-based instrumentation and microcontrollers Signal sampling Spring 2015 Lecture #5 Bekkeng, 29.1.2015 Content Aliasing Nyquist (Sampling) ADC Filtering Oversampling Triggering Analog Signal Information
More informationElectronics A/D and D/A converters
Electronics A/D and D/A converters Prof. Márta Rencz, Gábor Takács, Dr. György Bognár, Dr. Péter G. Szabó BME DED December 1, 2014 1 / 26 Introduction The world is analog, signal processing nowadays is
More information! Multi-Rate Filter Banks (con t) ! Data Converters. " Anti-aliasing " ADC. " Practical DAC. ! Noise Shaping
Lecture Outline ESE 531: Digital Signal Processing! (con t)! Data Converters Lec 11: February 16th, 2017 Data Converters, Noise Shaping " Anti-aliasing " ADC " Quantization "! Noise Shaping 2! Use filter
More information!"!#"#$% Lecture 2: Media Creation. Some materials taken from Prof. Yao Wang s slides RECAP
Lecture 2: Media Creation Some materials taken from Prof. Yao Wang s slides RECAP #% A Big Umbrella Content Creation: produce the media, compress it to a format that is portable/ deliverable Distribution:
More informationEEE 309 Communication Theory
EEE 309 Communication Theory Semester: January 2016 Dr. Md. Farhad Hossain Associate Professor Department of EEE, BUET Email: mfarhadhossain@eee.buet.ac.bd Office: ECE 331, ECE Building Part 05 Pulse Code
More informationChoosing the Best ADC Architecture for Your Application Part 3:
Choosing the Best ADC Architecture for Your Application Part 3: Hello, my name is Luis Chioye, I am an Applications Engineer with the Texas Instruments Precision Data Converters team. And I am Ryan Callaway,
More informationANALOGUE AND DIGITAL COMMUNICATION
ANALOGUE AND DIGITAL COMMUNICATION Syed M. Zafi S. Shah Umair M. Qureshi Lecture xxx: Analogue to Digital Conversion Topics Pulse Modulation Systems Advantages & Disadvantages Pulse Code Modulation Pulse
More informationData Converter Topics. Suggested Reference Texts
Data Converter Topics Basic Operation of Data Converters Uniform sampling and reconstruction Uniform amplitude quantization Characterization and Testing Common ADC/DAC Architectures Selected Topics in
More informationFYS3240 PC-based instrumentation and microcontrollers. Signal sampling. Spring 2017 Lecture #5
FYS3240 PC-based instrumentation and microcontrollers Signal sampling Spring 2017 Lecture #5 Bekkeng, 30.01.2017 Content Aliasing Sampling Analog to Digital Conversion (ADC) Filtering Oversampling Triggering
More informationWaveform Encoding - PCM. BY: Dr.AHMED ALKHAYYAT. Chapter Two
Chapter Two Layout: 1. Introduction. 2. Pulse Code Modulation (PCM). 3. Differential Pulse Code Modulation (DPCM). 4. Delta modulation. 5. Adaptive delta modulation. 6. Sigma Delta Modulation (SDM). 7.
More informationECE 2111 Signals and Systems Spring 2012, UMD Experiment 9: Sampling
ECE 2111 Signals and Systems Spring 2012, UMD Experiment 9: Sampling Objective: In this experiment the properties and limitations of the sampling theorem are investigated. A specific sampling circuit will
More informationOutline. Discrete time signals. Impulse sampling z-transform Frequency response Stability INF4420. Jørgen Andreas Michaelsen Spring / 37 2 / 37
INF4420 Discrete time signals Jørgen Andreas Michaelsen Spring 2013 1 / 37 Outline Impulse sampling z-transform Frequency response Stability Spring 2013 Discrete time signals 2 2 / 37 Introduction More
More informationBased with permission on lectures by John Getty Laboratory Electronics II (PHSX262) Spring 2011 Lecture 9 Page 1
Today 3// Lecture 9 Analog Digital Conversion Sampled Data Acquisition Systems Discrete Sampling and Nyquist Digital to Analog Conversion Analog to Digital Conversion Homework Study for Exam next week
More informationESE 531: Digital Signal Processing
ESE 531: Digital Signal Processing Lec 11: February 20, 2018 Data Converters, Noise Shaping Lecture Outline! Review: Multi-Rate Filter Banks " Quadrature Mirror Filters! Data Converters " Anti-aliasing
More informationLecture Schedule: Week Date Lecture Title
http://elec3004.org Sampling & More 2014 School of Information Technology and Electrical Engineering at The University of Queensland Lecture Schedule: Week Date Lecture Title 1 2-Mar Introduction 3-Mar
More informationSampling and Signal Processing
Sampling and Signal Processing Sampling Methods Sampling is most commonly done with two devices, the sample-and-hold (S/H) and the analog-to-digital-converter (ADC) The S/H acquires a continuous-time signal
More informationLecture Outline. ESE 531: Digital Signal Processing. Anti-Aliasing Filter with ADC ADC. Oversampled ADC. Oversampled ADC
Lecture Outline ESE 531: Digital Signal Processing Lec 12: February 21st, 2017 Data Converters, Noise Shaping (con t)! Data Converters " Anti-aliasing " ADC " Quantization "! Noise Shaping 2 Anti-Aliasing
More informationTelecommunication Electronics
Politecnico di Torino ICT School Telecommunication Electronics C5 - Special A/D converters» Logarithmic conversion» Approximation, A and µ laws» Differential converters» Oversampling, noise shaping Logarithmic
More informationESE 531: Digital Signal Processing
ESE 531: Digital Signal Processing Lec 12: February 21st, 2017 Data Converters, Noise Shaping (con t) Lecture Outline! Data Converters " Anti-aliasing " ADC " Quantization " Practical DAC! Noise Shaping
More informationAnalog and Telecommunication Electronics
Politecnico di Torino Electronic Eng. Master Degree Analog and Telecommunication Electronics D1 - A/D/A conversion systems» Sampling, spectrum aliasing» Quantization error» SNRq vs signal type and level»
More informationAdvanced Digital Signal Processing Part 2: Digital Processing of Continuous-Time Signals
Advanced Digital Signal Processing Part 2: Digital Processing of Continuous-Time Signals Gerhard Schmidt Christian-Albrechts-Universität zu Kiel Faculty of Engineering Institute of Electrical Engineering
More informationAnalog and Telecommunication Electronics
Politecnico di Torino - ICT School Analog and Telecommunication Electronics D5 - Special A/D converters» Differential converters» Oversampling, noise shaping» Logarithmic conversion» Approximation, A and
More informationSummary Last Lecture
EE47 Lecture 5 Pipelined ADCs (continued) How many bits per stage? Algorithmic ADCs utilizing pipeline structure Advanced background calibration techniques Oversampled ADCs Why oversampling? Pulse-count
More informationDigital to Analog Conversion. Data Acquisition
Digital to Analog Conversion (DAC) Digital to Analog Conversion Data Acquisition DACs or D/A converters are used to convert digital signals representing binary numbers into proportional analog voltages.
More informationSummary Last Lecture
Interleaved ADCs EE47 Lecture 4 Oversampled ADCs Why oversampling? Pulse-count modulation Sigma-delta modulation 1-Bit quantization Quantization error (noise) spectrum SQNR analysis Limit cycle oscillations
More informationEEE 309 Communication Theory
EEE 309 Communication Theory Semester: January 2017 Dr. Md. Farhad Hossain Associate Professor Department of EEE, BUET Email: mfarhadhossain@eee.buet.ac.bd Office: ECE 331, ECE Building Types of Modulation
More informationECE 6560 Multirate Signal Processing Chapter 13
Multirate Signal Processing Chapter 13 Dr. Bradley J. Bazuin Western Michigan University College of Engineering and Applied Sciences Department of Electrical and Computer Engineering 1903 W. Michigan Ave.
More informationIslamic University of Gaza. Faculty of Engineering Electrical Engineering Department Spring-2011
Islamic University of Gaza Faculty of Engineering Electrical Engineering Department Spring-2011 DSP Laboratory (EELE 4110) Lab#4 Sampling and Quantization OBJECTIVES: When you have completed this assignment,
More informationMoving from continuous- to discrete-time
Moving from continuous- to discrete-time Sampling ideas Uniform, periodic sampling rate, e.g. CDs at 44.1KHz First we will need to consider periodic signals in order to appreciate how to interpret discrete-time
More informationII Year (04 Semester) EE6403 Discrete Time Systems and Signal Processing
Class Subject Code Subject II Year (04 Semester) EE6403 Discrete Time Systems and Signal Processing 1.CONTENT LIST: Introduction to Unit I - Signals and Systems 2. SKILLS ADDRESSED: Listening 3. OBJECTIVE
More informationCommunications and Signals Processing
Communications and Signals Processing Dr. Ahmed Masri Department of Communications An Najah National University 2012/2013 1 Dr. Ahmed Masri Chapter 5 - Outlines 5.4 Completing the Transition from Analog
More informationEE247 Lecture 11. Example: Switched-capacitor filters in CODEC integrated circuits. Switched-capacitor filter design summary
EE47 Lecture 11 Filters (continued) Example: Switched-capacitor filters in CODEC integrated circuits Switched-capacitor filter design summary Comparison of various filter topologies New Topic: Data Converters
More informationPulse Code Modulation (PCM)
Project Title: e-laboratories for Physics and Engineering Education Tempus Project: contract # 517102-TEMPUS-1-2011-1-SE-TEMPUS-JPCR 1. Experiment Category: Electrical Engineering >> Communications 2.
More informationLecture 10, ANIK. Data converters 2
Lecture, ANIK Data converters 2 What did we do last time? Data converter fundamentals Quantization noise Signal-to-noise ratio ADC and DAC architectures Overview, since literature is more useful explaining
More informationSIGMA-DELTA CONVERTER
SIGMA-DELTA CONVERTER (1995: Pacífico R. Concetti Western A. Geophysical-Argentina) The Sigma-Delta A/D Converter is not new in electronic engineering since it has been previously used as part of many
More informationTime Matters How Power Meters Measure Fast Signals
Time Matters How Power Meters Measure Fast Signals By Wolfgang Damm, Product Management Director, Wireless Telecom Group Power Measurements Modern wireless and cable transmission technologies, as well
More informationData Converters. Springer FRANCO MALOBERTI. Pavia University, Italy
Data Converters by FRANCO MALOBERTI Pavia University, Italy Springer Contents Dedicat ion Preface 1. BACKGROUND ELEMENTS 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 The Ideal Data Converter Sampling 1.2.1 Undersampling
More informationChapter 2: Digitization of Sound
Chapter 2: Digitization of Sound Acoustics pressure waves are converted to electrical signals by use of a microphone. The output signal from the microphone is an analog signal, i.e., a continuous-valued
More informationLec. 8: Subranging/Two-step ADCs
In The Name of Almighty Lec. 8: Subranging/Two-step ADCs Lecturer: Hooman Farkhani Department of Electrical Engineering Islamic Azad University of Najafabad Feb. 2016. Email: H_farkhani@yahoo.com General
More informationSampling, interpolation and decimation issues
S-72.333 Postgraduate Course in Radiocommunications Fall 2000 Sampling, interpolation and decimation issues Jari Koskelo 28.11.2000. Introduction The topics of this presentation are sampling, interpolation
More informationModule 3 : Sampling and Reconstruction Problem Set 3
Module 3 : Sampling and Reconstruction Problem Set 3 Problem 1 Shown in figure below is a system in which the sampling signal is an impulse train with alternating sign. The sampling signal p(t), the Fourier
More informationAnalog and Digital Signals
E.M. Bakker LML Audio Processing and Indexing 1 Analog and Digital Signals 1. From Analog to Digital Signal 2. Sampling & Aliasing LML Audio Processing and Indexing 2 1 Analog and Digital Signals Analog
More informationDigital Communication (650533) CH 3 Pulse Modulation
Philadelphia University/Faculty of Engineering Communication and Electronics Engineering Digital Communication (650533) CH 3 Pulse Modulation Instructor: Eng. Nada Khatib Website: http://www.philadelphia.edu.jo/academics/nkhatib/
More informationPipeline vs. Sigma Delta ADC for Communications Applications
Pipeline vs. Sigma Delta ADC for Communications Applications Noel O Riordan, Mixed-Signal IP Group, S3 Semiconductors noel.oriordan@s3group.com Introduction The Analog-to-Digital Converter (ADC) is a key
More informationChapter 4 Digital Transmission 4.1
Chapter 4 Digital Transmission 4.1 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 4-2 ANALOG-TO-DIGITAL CONVERSION We have seen in Chapter 3 that a digital signal
More informationThe Case for Oversampling
EE47 Lecture 4 Oversampled ADCs Why oversampling? Pulse-count modulation Sigma-delta modulation 1-Bit quantization Quantization error (noise) spectrum SQNR analysis Limit cycle oscillations nd order ΣΔ
More informationFundamentals of Data Conversion: Part I.1
Fundamentals of Data Conversion: Part I.1 Sebastian Hoyos http://ece.tamu.edu/~hoyos/ Several of these slides were provided by Dr. Jose Silva-Martinez and Dr. Jun Zhou Outline Fundamentals of Analog-to-Digital
More informationSystem on a Chip. Prof. Dr. Michael Kraft
System on a Chip Prof. Dr. Michael Kraft Lecture 5: Data Conversion ADC Background/Theory Examples Background Physical systems are typically analogue To apply digital signal processing, the analogue signal
More information! Where are we on course map? ! What we did in lab last week. " How it relates to this week. ! Sampling/Quantization Review
! Where are we on course map?! What we did in lab last week " How it relates to this week! Sampling/Quantization Review! Nyquist Shannon Sampling Rate! Next Lab! References Lecture #2 Nyquist-Shannon Sampling
More informationSAMPLING AND RECONSTRUCTING SIGNALS
CHAPTER 3 SAMPLING AND RECONSTRUCTING SIGNALS Many DSP applications begin with analog signals. In order to process these analog signals, the signals must first be sampled and converted to digital signals.
More informationSignals and Systems. Lecture 13 Wednesday 6 th December 2017 DR TANIA STATHAKI
Signals and Systems Lecture 13 Wednesday 6 th December 2017 DR TANIA STATHAKI READER (ASSOCIATE PROFFESOR) IN SIGNAL PROCESSING IMPERIAL COLLEGE LONDON Continuous time versus discrete time Continuous time
More informationAnalog to Digital Conversion
Analog to Digital Conversion Florian Erdinger Lehrstuhl für Schaltungstechnik und Simulation Technische Informatik der Uni Heidelberg VLSI Design - Mixed Mode Simulation F. Erdinger, ZITI, Uni Heidelberg
More informationCommunication Theory II
Communication Theory II Lecture 17: Conversion of Analog Waveforms into Coded Pulses Ahmed Elnakib, PhD Assistant Professor, Mansoura University, Egypt April 16 th, 2015 1 opulse Modulation Analog Pulse
More informationFFT Analyzer. Gianfranco Miele, Ph.D
FFT Analyzer Gianfranco Miele, Ph.D www.eng.docente.unicas.it/gianfranco_miele g.miele@unicas.it Introduction It is a measurement instrument that evaluates the spectrum of a time domain signal applying
More informationEE482: Digital Signal Processing Applications
Professor Brendan Morris, SEB 3216, brendan.morris@unlv.edu EE482: Digital Signal Processing Applications Spring 2014 TTh 14:30-15:45 CBC C222 Lecture 01 Introduction 14/01/21 http://www.ee.unlv.edu/~b1morris/ee482/
More informationYEDITEPE UNIVERSITY ENGINEERING FACULTY COMMUNICATION SYSTEMS LABORATORY EE 354 COMMUNICATION SYSTEMS
YEDITEPE UNIVERSITY ENGINEERING FACULTY COMMUNICATION SYSTEMS LABORATORY EE 354 COMMUNICATION SYSTEMS EXPERIMENT 3: SAMPLING & TIME DIVISION MULTIPLEX (TDM) Objective: Experimental verification of the
More informationWideband Direct Digital Radio Modeling and Verification Rulon VanDyke 1, David Leiss 2
IMS2011 Wideband Direct Digital Radio Modeling and Verification Rulon VanDyke 1, David Leiss 2 1 Agilent Technologies, Alpharetta, GA, USA 2 Agilent Technologies, Manassas, VA, USA Typical Presentation
More informationCommunications IB Paper 6 Handout 3: Digitisation and Digital Signals
Communications IB Paper 6 Handout 3: Digitisation and Digital Signals Jossy Sayir Signal Processing and Communications Lab Department of Engineering University of Cambridge jossy.sayir@eng.cam.ac.uk Lent
More informationMultirate DSP, part 1: Upsampling and downsampling
Multirate DSP, part 1: Upsampling and downsampling Li Tan - April 21, 2008 Order this book today at www.elsevierdirect.com or by calling 1-800-545-2522 and receive an additional 20% discount. Use promotion
More informationChapter-2 SAMPLING PROCESS
Chapter-2 SAMPLING PROCESS SAMPLING: A message signal may originate from a digital or analog source. If the message signal is analog in nature, then it has to be converted into digital form before it can
More informationChapter 7. Introduction. Analog Signal and Discrete Time Series. Sampling, Digital Devices, and Data Acquisition
Chapter 7 Sampling, Digital Devices, and Data Acquisition Material from Theory and Design for Mechanical Measurements; Figliola, Third Edition Introduction Integrating analog electrical transducers with
More informationCommunications I (ELCN 306)
Communications I (ELCN 306) c Samy S. Soliman Electronics and Electrical Communications Engineering Department Cairo University, Egypt Email: samy.soliman@cu.edu.eg Website: http://scholar.cu.edu.eg/samysoliman
More informationEE247 Lecture 11. EECS 247 Lecture 11: Intro. to Data Converters & Performance Metrics 2009 H. K. Page 1. Typical Sampling Process C.T. S.D. D.T.
EE247 Lecture Data converters Sampling, aliasing, reconstruction Amplitude quantization Static converter error sources Offset Full-scale error Differential non-linearity (DNL) Integral non-linearity (INL)
More informationECE 484 Digital Image Processing Lec 09 - Image Resampling
ECE 484 Digital Image Processing Lec 09 - Image Resampling Zhu Li Dept of CSEE, UMKC Office: FH560E, Email: lizhu@umkc.edu, Ph: x 2346. http://l.web.umkc.edu/lizhu slides created with WPS Office Linux
More informationSAMPLING FREQUENCY SELECTION SCHEME FOR A MULTIPLE SIGNAL RECEIVER USING UNDERSAMPLING
SAMPLING FREQUENCY SELECTION SCHEME FOR A MULTIPLE SIGNAL RECEIVER USING UNDERSAMPLING Yoshio Kunisawa (KDDI R&D Laboratories, yokosuka, kanagawa, JAPAN; kuni@kddilabs.jp) ABSTRACT A multi-mode terminal
More informationBibliography. Practical Signal Processing and Its Applications Downloaded from
Bibliography Practical Signal Processing and Its Applications Downloaded from www.worldscientific.com Abramowitz, Milton, and Irene A. Stegun. Handbook of mathematical functions: with formulas, graphs,
More informationFUNDAMENTALS OF ANALOG TO DIGITAL CONVERTERS: PART I.1
FUNDAMENTALS OF ANALOG TO DIGITAL CONVERTERS: PART I.1 Many of these slides were provided by Dr. Sebastian Hoyos January 2019 Texas A&M University 1 Spring, 2019 Outline Fundamentals of Analog-to-Digital
More informationSampling and Reconstruction of Analog Signals
Sampling and Reconstruction of Analog Signals Chapter Intended Learning Outcomes: (i) Ability to convert an analog signal to a discrete-time sequence via sampling (ii) Ability to construct an analog signal
More informationMultirate DSP, part 3: ADC oversampling
Multirate DSP, part 3: ADC oversampling Li Tan - May 04, 2008 Order this book today at www.elsevierdirect.com or by calling 1-800-545-2522 and receive an additional 20% discount. Use promotion code 92562
More informationLecture 3 Review of Signals and Systems: Part 2. EE4900/EE6720 Digital Communications
EE4900/EE6720: Digital Communications 1 Lecture 3 Review of Signals and Systems: Part 2 Block Diagrams of Communication System Digital Communication System 2 Informatio n (sound, video, text, data, ) Transducer
More informationDesign of Continuous Time Multibit Sigma Delta ADC for Next Generation Wireless Applications
RESEARCH ARTICLE OPEN ACCESS Design of Continuous Time Multibit Sigma Delta ADC for Next Generation Wireless Applications Sharon Theresa George*, J. Mangaiyarkarasi** *(Department of Information and Communication
More informationTE 302 DISCRETE SIGNALS AND SYSTEMS. Chapter 1: INTRODUCTION
TE 302 DISCRETE SIGNALS AND SYSTEMS Study on the behavior and processing of information bearing functions as they are currently used in human communication and the systems involved. Chapter 1: INTRODUCTION
More informationSAMPLING THEORY. Representing continuous signals with discrete numbers
SAMPLING THEORY Representing continuous signals with discrete numbers Roger B. Dannenberg Professor of Computer Science, Art, and Music Carnegie Mellon University ICM Week 3 Copyright 2002-2013 by Roger
More informationDesign IV. E232 Spring 07
Design IV Spring 07 Class 8 Bruce McNair bmcnair@stevens.edu 8-1/38 Computerized Data Acquisition Measurement system architecture System under test sensor sensor sensor sensor signal conditioning signal
More informationMusic 270a: Fundamentals of Digital Audio and Discrete-Time Signals
Music 270a: Fundamentals of Digital Audio and Discrete-Time Signals Tamara Smyth, trsmyth@ucsd.edu Department of Music, University of California, San Diego October 3, 2016 1 Continuous vs. Discrete signals
More informationLecture 9, ANIK. Data converters 1
Lecture 9, ANIK Data converters 1 What did we do last time? Noise and distortion Understanding the simplest circuit noise Understanding some of the sources of distortion 502 of 530 What will we do today?
More informationFundamentals of Data Converters. DAVID KRESS Director of Technical Marketing
Fundamentals of Data Converters DAVID KRESS Director of Technical Marketing 9/14/2016 Analog to Electronic Signal Processing Sensor (INPUT) Amp Converter Digital Processor Actuator (OUTPUT) Amp Converter
More informationSignal Sampling. Sampling. Sampling. Sampling. Sampling. Sampling
Signal Let s sample the signal at a time interval o Dr. Christopher M. Godrey University o North Carolina at Asheville Photo: C. Godrey Let s sample the signal at a time interval o Reconstruct the curve
More informationThe Discussion of this exercise covers the following points: Filtering Aperture distortion
Exercise 3-1 PAM Signals Demodulation EXERCISE OBJECTIVE When you have completed this exercise you will be able to demonstrate the recovery of the original message signal from a PAM signal using the PAM
More informationLinear Integrated Circuits
Linear Integrated Circuits Single Slope ADC Comparator checks input voltage with integrated reference voltage, V REF At the same time the number of clock cycles is being counted. When the integrator output
More informationCSCD 433 Network Programming Fall Lecture 5 Physical Layer Continued
CSCD 433 Network Programming Fall 2016 Lecture 5 Physical Layer Continued 1 Topics Definitions Analog Transmission of Digital Data Digital Transmission of Analog Data Multiplexing 2 Different Types of
More informationAnalog-to-Digital Converters
EE47 Lecture 3 Oversampled ADCs Why oversampling? Pulse-count modulation Sigma-delta modulation 1-Bit quantization Quantization error (noise) spectrum SQNR analysis Limit cycle oscillations nd order ΣΔ
More informationLaboratory Assignment 1 Sampling Phenomena
1 Main Topics Signal Acquisition Audio Processing Aliasing, Anti-Aliasing Filters Laboratory Assignment 1 Sampling Phenomena 2.171 Analysis and Design of Digital Control Systems Digital Filter Design and
More informationCHAPTER 4. PULSE MODULATION Part 2
CHAPTER 4 PULSE MODULATION Part 2 Pulse Modulation Analog pulse modulation: Sampling, i.e., information is transmitted only at discrete time instants. e.g. PAM, PPM and PDM Digital pulse modulation: Sampling
More informationThe Fundamentals of Mixed Signal Testing
The Fundamentals of Mixed Signal Testing Course Information The Fundamentals of Mixed Signal Testing course is designed to provide the foundation of knowledge that is required for testing modern mixed
More informationVoice Transmission --Basic Concepts--
Voice Transmission --Basic Concepts-- Voice---is analog in character and moves in the form of waves. 3-important wave-characteristics: Amplitude Frequency Phase Telephone Handset (has 2-parts) 2 1. Transmitter
More informationNational Instruments Flex II ADC Technology The Flexible Resolution Technology inside the NI PXI-5922 Digitizer
National Instruments Flex II ADC Technology The Flexible Resolution Technology inside the NI PXI-5922 Digitizer Kaustubh Wagle and Niels Knudsen National Instruments, Austin, TX Abstract Single-bit delta-sigma
More informationPYKC 27 Feb 2017 EA2.3 Electronics 2 Lecture PYKC 27 Feb 2017 EA2.3 Electronics 2 Lecture 11-2
In this lecture, I will introduce the mathematical model for discrete time signals as sequence of samples. You will also take a first look at a useful alternative representation of discrete signals known
More informationENGR 210 Lab 12: Sampling and Aliasing
ENGR 21 Lab 12: Sampling and Aliasing In the previous lab you examined how A/D converters actually work. In this lab we will consider some of the consequences of how fast you sample and of the signal processing
More informationAliasing and Antialiasing. What is Aliasing? What is Aliasing? What is Aliasing?
What is Aliasing? Errors and Artifacts arising during rendering, due to the conversion from a continuously defined illumination field to a discrete raster grid of pixels 1 2 What is Aliasing? What is Aliasing?
More informationQUESTION BANK. SUBJECT CODE / Name: EC2301 DIGITAL COMMUNICATION UNIT 2
QUESTION BANK DEPARTMENT: ECE SEMESTER: V SUBJECT CODE / Name: EC2301 DIGITAL COMMUNICATION UNIT 2 BASEBAND FORMATTING TECHNIQUES 1. Why prefilterring done before sampling [AUC NOV/DEC 2010] The signal
More informationECEGR Lab #8: Introduction to Simulink
Page 1 ECEGR 317 - Lab #8: Introduction to Simulink Objective: By: Joe McMichael This lab is an introduction to Simulink. The student will become familiar with the Help menu, go through a short example,
More informationOversampling Data Converters Tuesday, March 15th, 9:15 11:40
Oversampling Data Converters Tuesday, March 15th, 9:15 11:40 Snorre Aunet (sa@ifi.uio.no) Nanoelectronics group Department of Informatics University of Oslo Last time and today, Tuesday 15th of March:
More information