Astragals and Meeting Stiles

Transcription

1

2 Table of Contents Split Astragals Split Astragals with Snap Covers Meeting Stile Gasketing Offset Security Bar/"T" and Overlapping Astragals Adjustable Astragals Security Astragal Index MCK18041CNB MCK18061CNB MCK29310CS MCK29324CNB MCK29326CNB MCK297AS MCK300BP MCK303AS MCK305BN MCK310C MCK311CIN MCK313AN MCK314CN MCK316AS MCK318AV MCK351B MCK351BS MCK352CR MCK354B MCK354BS MCK355BS MCK356AV MCK3572SP MCK357C MCK357SP MCK358CN MCK359A MCK369AV MCK375BR MCK378C MCK5025ASB MCKA371P MCKA372P MCKB /30/03

3 Split Astragals Astragal and Meeting Stile Gasketing Astragals and meeting stiles on double doors often present problems because of complex conditions and requirements. McKINNEY offers some simple and inexpensive solutions as well as more detailed ones. Each job should be carefully studied as to the specific requirements when selecting the appropriate gasketing. Note that some astragals consist of two parts, one for each door, and should be ordered as such. Astragals and meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, The clearance between...the meeting edges of doors swinging in pairs on the pull side shall be 1/8 ± 1/16 (3.18mm ± 1.59mm) for steel doors and shall not exceed 1/8 (3.18mm) for wood doors. Note: All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush. Split Astragals Punched with slotted holes for adjustment. MCK297APK MCK297BDGPK MCK297DPK MCK297GPK MCK297PWPK MCK297SNPK PemkoPrene (PK) MCK297AV MCK297BDGV MCK297DV MCK297GV MCK297PWV MCK297SNV MCK297AS MCK297BDGS MCK297DS MCK297GS MCK297PWS MCK297SNS vinyl (V) MCK303APK MCK303BDGPK MCK303DPK MCK303GPK MCK303PWPK MCK303SNPK PemkoPrene (PK) MCK303AV MCK303BDGV MCK303DV MCK303GV MCK303PWV MCK303SNV MCK303AS MCK303BDGS MCK303DS MCK303GS MCK303PWS MCK303SNS vinyl (V) MCK316APK MCK316BDGPK MCK316DPK MCK316GPK PemkoPrene (PK) MCK316AV MCK316BDGV MCK316BDGV MCK316GV MCK316AS MCK316GS MCK316BDGS MCK316DS vinyl (V) soft brush (SB) MCK18041CSB MCK18041DSB MCK18041GSB MCK18041SNSB 1 12/3/04

4 Split Astragals Split Astragals continued MCK18061CNB MCK18061DNB MCK18061GNB MCK18061SNNB MCK305BN MCK305DN MCK305CN MCK305GN McK310C MCK18061CNB MCK18061DNB MCK18061GNB MCK18061SNNB Material required for one pair of doors: 4 ea. MCK310 bars and 2 ea. MCK311CIN cloth inserted rubber pieces. Specify 4-1/2" MCK311CIN for 2-1/4" thick doors. MCK310C MCK310D MCK310G MCK311CIN MCK18041CNB MCK18041DNB MCK18041GNB MCK18041SNNB See Brush Section for additional split astragal applications. MCK318AV MCK318BDGV MCK318DV MCK318GV MCK318PWR 1/3/05 2

5 Split Astragals with Snap Covers Split Astragals with Snap Covers Concealed Fasteners Snap covering helps prevent vandalism and adds an attractive finished look by concealing the fasteners. Note: All clear anodized brush products are supplied with gray brush (available with black brush upon request. Other finishes supplied with black brush. MCK29310CV MCK29310DV MCK29310GV vinyl (V) MCK29310CP MCK29310DP MCK29310GP Pemko- Prene (PK) MCK29310CPK MCK29310CPK MCK29310CPK pile (P) MCK29310CS MCK29310DS MCK29310GS MCK29324CSB MCK29324DSB soft brush (SB) MCK29324CNB MCK29324DNB Low Profile MCK29324CNB split astragal with snap cover. MCK29326CNB MCK29326DNB 3 1/3/05

6 Meeting Stile Gasketing Meeting Stile Gasketing Most models punched with slotted holes for adjustment Astragals/meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFPA 80, MCK369AV MCK369DV MCK369GV MCK369APK MCK369DPK MCK369GPK MCK369AS MCK369DS MCK369GS MCK369AP MCK369DP MCK369GP MCK369AP kerfed into meeting stile application. MCK5025ASB Furnished with gray pile (P). Also available with 1/8" gray or black pile (P). MCKA371P 1/4" pile MCKA372P 3/8" pile Available in 84" and 96" lengths. Available in gray pile only. Fasten with nails or staples through pile and backing, or use adhesive. Fasteners not supplied. Pile and backing do not separate. MCK300BP MCK300CP MCK300DP MCK300GP For a 3/8" ap (or smaller) between doors. Spring-loaded from back side. This product does not work well on beveled edge pairs of doors. MCKB71 MCKSS gauge hemmed spring bronze (B), stainless steel (SS)..015 gauge brass retainer and.020 gauge stainless steel (SS) retainer Available in 36", 72", 80", 84" and 96" lengths. MCK313AN MCK313DN MCK313GN MCK314CN MCK314DN MCK314GN MCK358CN MCK358DN MCK358GN 1/3/05 4

7 Offset Security Bar T and Overlapping Astragals Offset Security Bar For use on single outswing wood or metal doors. Covers gap between the door and jamb for the full door height, preventing prying and manipulation. Excellent for classroom doors opening onto exterior walkways (specified and approved by major school districts). Available in 80, 84 and 96 lengths. MCK3572SP supplied drilled 12 on center with 1/4 holes. MCK3572SPND ( no drill ) supplied undrilled. Thru-bolts are included with or without drilling. MCK3572SP MCK3572SPND T and Overlapping Astragals MCK355BS MCK355BDGS MCK355CS MCK355DS MCK355GS MCK355PWS MCK355SNS mill finish extruded bronze (brass) " (34.9) vinyl (V) MCK355BV MCK355BDGV MCK355CV MCK355DV MCK355GV MCK355PWV MCK355SNV pile (P) MCK355BP MCK355BDGP MCK355CP MCK355DP MCK355GP MCK355PWP MCK355SNP MCK356AV MCK356DV MCK356PWV MCK356BDGV MCK356GV MCK356SNV MCK352CR MCK352DR MCK352GR For reverse bevel doors. 1/4"- 20 machine screws and thru-bolts must be ordered separately at additional cost. Standard fastener is #10 x 1 Truss Head SMS. ND denotes no drill (unless specified ND, astragals are drilled). Countersink drilling with countersunk flathead screws also available upon request at no extra charge. MCK357C MCK357G MCK357SS MCK357D MCK357SP MCK357SPND MCK357SSND mill finish extruded bronze (brass). MCK375BR MCK375CR MCK375DR MCK375GR Finish: #4 (Stainless Steel only) 5 1/5/05

8 and Overlapping Astragals Adjustable Astragals T and Overlapping Astragals continued If specifications state that an astragal is required to satisfy a fire and / or smoke rated opening, then a thru-bolted MCK357SP or SS in conjunction with MCKS88 seal is the only configuration that can be used. 1/4"- 20 machine screws and thru-bolts must be ordered separately at additional cost. Standard fastener is #10 x 1 Truss Head SMS. MCKS88 (see Edge Sealing Products section) must be ordered separately at an additional cost, if required. MCK357SP MCK357SS with S88 Finish: #4 (Stainless Steel only) For light residential installations. Includes #16 x 7/8" flathead zinc nails. MCK359A MCK359BDG MCK359D MCK359G Adjustable Astragals When used as split astragals on double doors, two lengths must be ordered: one for each door. Available in 84", 96" and 120" lengths. MCK51 is surface applied; MCK354 is full-mortise applied. NOTE: If you require split astragals in a metal to gasket configuration, you must order each leaf separately with your choice of insert in the tables below. MCK351BS MCK351CS MCK351DS MCK351GS MCK351BS MCK351CS MCK351DS MCK351GS pile (P) MCK351BP MCK351CP MCK351DP MCK351GP vinyl (V) MCK351BV MCK351CV MCK351DV MCK351GV MCK351B MCK351C MCK351D MCK351G PemkoPrene (PK) MCK351BPK MCK351CPK MCK351DPK MCK351GPK pile (P) MCK354BP MCK354CP MCK354DP MCK354GP vinyl (V) MCK354BV MCK354CV MCK354DV MCK354GV PemkoPrene (PK) MCK354BPK MCK354CPK MCK354DPK MCK354GPK MCK351B MCK351C MCK351D MCK351G MCK354BS MCK354CS MCK354DS MCK354GS 1/3/05 6

9 Security Astragals Security Astragal Automatic security astragal for outswing pairs of wood and metal doors. Discourages manipulation of panic-type hardware. Astragal is held flush against other door by 1/2" thick cam (cam and mounting screws included). Anodized aluminum with vinyl seal and stainless steel operating spring. Either door may be active without requiring a coordinator. Only available in 86" and 96" lengths. Parts can be trimmed 12" maximum from each end. Should be mounted prior to attaching panic hardware to eliminate the problem ofinterference. Must be installed on the inside of a pair of outswing doors. MCK378C MCK378D MCK378G 7 11/30/04

10 Standard Finishes/Special Order Finishes Code A B BDC BDG C CB D G PA PB PD PG PW S SN SP SS Z Standard Finishes Finish Designations mill finish aluminum mill finish extruded bronze (brass) bright dip clear anodized aluminum bright dip gold anodized aluminum clear anodized aluminum cladded brass dark bronze anodized aluminum gold anodized aluminum painted aluminum painted bronze aluminum painted dark bronze aluminum painted gold aluminum painted white aluminum cladded stainless steel satin nickel anodized aluminum galvanealed steel see individual part for finish zinc metal AK skid resistant PemKote (on aluminum or bronze) Special Order Finishes Code Finish Designations black anodized aluminum chrome plated bronze gray prime coated aluminum polished alumnium, uncoated polished bronze, uncoated satin brushed aluminum, uncoated satin brushed bronze, uncoated oxidized and oil rubbed bronze 250 / BDG / V / 36 PROFILE FINISHES INSERTS LENGTH 430 A mill finish aluminum N neoprene B mill finish extruded bronze (brass) NB nylon brush BDG bright dip gold anodized aluminum P pile C clear anodized aluminum R sponge neoprene D dark bronze anodized aluminum S SiliconSeal 3684 etc. etc. V vinyl etc. McKINNEY Products Company 820 Davis Street Scranton PA Phone: Fax: ASSA ABLOY Canada Markham, Ontario Phone: Fax: YALE-CORBIN Canada, LTD Edwards Boulevard Mississauga, Ontario Phone: Fax: Founded in 1864, McKINNEY Products Company is a market leader in the manufacture of quality architectural grade hinges including security hinges, and continuous hinges for the builders hardware industry. The ASSA ABLOY Group is the world s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user needs for security, safety and convenience.