Fire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors
|
|
|
- Sara Bennett
- 6 years ago
- Views:
Transcription
1 FM-300 Edge Mount 260 Santa Fe Street, Pomona, CA fax Heavy-duty 14 Gauge stainless steel US32D Satin Stainless Steel (630) Grade 1 4'0" maximum door width 6'8", 7'0", 7'2", 8'0", 10'0" Hole Pattern Symmetrically templated Non-handed 1/4" diameter stainless steel pin Fire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors US32 Bright Stainless Steel (629) Scratch-Resistant Powder Coated Paint Custom lengths- specify in inches Custom hole pattern Tamper-proof security screws Dutch door hinges- suffix hinge DD Hospital tips suffix hinge HT Medical Bearings suffix MB Raised barrel Special sheared leaf Exposed switch with adjusting screwsuffix hinge ES Current Transfer Prep - suffix hinge CTP CE-4D CE-8D Adjustable monitoring switch suffix hinge AMS ElectroLYNX TM EL-8 (8 wire), EL-12 (12 wire) Classified in accordance with UBC code standard 7-2 for positive pressure fire-rated label This edge-mounted pin & barrel type hinge is used on many of today s high traffic, high abuse doors. The hinge works well in locations that used anchor hinges, pivot reinforcement hinges or thrust pivot unit and hinge sets. This hinge saves on special door and frame preparation charges and makes the installer s job easier. It can be used on both fire labeled and non-labeled openings. DOOR CLOSED DOOR OPEN Markar Architectural Products, Inc.
2 FS-101 Full Surface 1/8 Inset 6063-T6 aluminum Clear satin (628) Dark bronze (313) Grade 2 No exposed mounting fasteners 6 8, 7 0,7 2, 8 0 Light bronze (311) Black (315) Bright dipped locking security covers 1 3/4" aluminum sleeve bolts Hospital tips - suffix hinge "HT" Lead lined cover with 1/16" lead lining - suffix hinge "LL" Current transfer - 4 or 8 28 gauge wires - suffix hinge "CE4" or CE8" Locking Security Covers Brushed aluminum finish 1/4 diameter Teflon-coated stainless steel pin This surface-mounted pin & barrel type continuous hinge is the correct hinge to solve door sag problems. The 1/8" inset allows perfect alignment for retrofitting hollow metal, wood or aluminum doors within the existing conditions - no need to readjust your weather-stripping! 8/02 DOOR CLOSED DOOR OPEN 90
3 FS-102 Full Surface Flush Mount 6063-T6 aluminum Clear satin (628) Dark bronze (313) Grade 2 Light bronze (311) Black (315) Bright dipped locking security covers 1 3/4" aluminum sleeve bolts Hospital tips - suffix hinge "HT" Lead lined cover with 1/16" lead lining - suffix hinge "LL" Current transfer - 4 or 8 28 gauge wires - suffix hinge "CE4" or CE8" 6 8, 7 0,7 2, 8 0 Locking Security Covers Brushed aluminum finish 1/4 diameter Teflon-coated stainless steel pin For flush-mounted doors. This surface-mounted pin & barrel type continuous hinge is the right choice for solving your door sag problems. This unit works well on all types of aluminum, wood and hollow metal door applications. The hinge also features tamper-resistant cover caps to prevent vandalism or break-ins. 2/02 DOOR CLOSED DOOR OPEN 90
4 HS-103 Half Surface 6063-T6 aluminum Clear satin (628) Dark bronze (313) Grade 2 6 8, 7 0,7 2, 8 0 Locking Security Covers Brushed aluminum finish Light bronze (311) Black (315) Bright dipped locking security covers Custom hole pattern Dutch door hinges suffix hinge DD Hospital tips suffix hinge HT Lead lined cover with 1/16 lead lining suffix hinge LL Fasteners Tamper-proof security screws 1¾ aluminum sleeve bolts Current transfer - 4 or 8 28 gauge wires - suffix hinge "CE4" or CE8" Current Transfer Prep (frame leaf only) - suffix hinge "CTP" Hole Pattern Symmetrically templated Non-handed 1/4 diameter Teflon-coated stainless steel pin This half-surface aluminum pin & barrel type hinge can be used to repair doors that need the frame reinforced. This hinge can also be used on openings that have too large a gap between the door and frame. The hinge is surface edge mounted on the door frame. 8/02 DOOR CLOSED DOOR OPEN 90
5 HG-305 Hinge Guard Heavy-duty 14 Gauge 304 stainless steel US32D Satin stainless steel (630) Grade 1 AdjustaScrews for correcting frame fit problems up to 3/8" 6 8, 7 0,7 2, 8 0, 10 0 Hole Pattern Symmetrically templated Non-handed 1/4 diameter stainless steel pin Fire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors Classified in accordance with UBC code standard 7-2 for positive pressure US32 Bright Polished stainless steel (629) Custom hole pattern Hospital tips - suffix hinge "HT" Raised barrel Special sheared leaf Fasteners Tamper-proof security screws Current transfer - contacts are broken when hinge opens. 4 or 8 wires - suffix hinge "CT4" or "CT8" Exposed switch with adjusting screw - suffix hinge "ES" Current Transfer Prep - suffix hinge "CTP" CE-4D CE-8D fire-rated label This is the greatest continuous hinge ever engineered. This unique design answers the problem of adjusting doors where frames are not installed plumb or properly aligned. Not only that, but the wrap-around edge guard protects the door from unsightly dents and gouges and will deflect objects, preventing further damage. Strategically located fasteners coupled with the AdjustaScrew fastener allow the door to be adjusted up to 3/8" within the channel of the hinge and distribute the load of the door down the entire length of the jamb. The proper alignment of the door to the frame will allow your closers, panics magnetic locks, electronic strikes, and automatic operators to assist you in meeting all your life safety code requirements. 8/02 DOOR CLOSED DOOR OPEN 90
6 FS-302 Full Surface Flush Mount Heavy-duty 14 Gauge 304 stainless steel US32D Satin stainless steel (630) Grade 1 US32 Bright Polished stainless steel (629) Bright dipped fastener covers 1 3/4" aluminum sleeve bolts Hospital tips suffix hinge HT Lead lined cover with 1/16" lead lining - suffix hinge "LL" Raised barrel 6 8, 7 0,7 2, 8 0, 10 0 Decorative Fastener Covers Brushed aluminum 1/4 diameter stainless steel pin Fire Rating 3 hours- hollow metal doors mounted singly 90 minutes- hollow metal and composite core wood fire doors 20 minutes- wood doors Classified in accordance with UBC code standard 7-2 for positive pressure fire-rated label For flush doors. This surface-mounted pin & barrel type continuous hinge can be used to repair both fire labeled and non-labeled doors that have very tight clearances. 8/02 DOOR CLOSED DOOR OPEN 90
300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
Architectural Door Accessories. Markar Continuous Hinges
Architectural Door Accessories Why Continuous Hinges? Hinge failure most commonly begins when doors are opened beyond stop device limits. The resulting kickback shock to the hinges can surpass 1000 lbs.
Stainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Why Continuous? Hager Companies heavy duty stainless steel continuous hinges are designed and engineered to evenly distribute door weight along the full length of the
Hinges / Continuous. Hager Continuous Hinges/Pivots. Hager Roton Replacement Moldings
Roton Replacement Moldings s/pivots 780-210M Replacement door leaf molding for 780-210 (HD), 780-211 (HD), 780-213 (HD), 80-045 (HD), 780-046 (HD). Furnished with Allen Head set screws and wrench. Shipped
Aluminum Continuous Geared Hinges
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
Stainless Steel Continuous Hinges
TABLE OF CONTENTS A ANSI Standards...2 C Cancellation Notification... 2 Concealed Electric Through-Wire... 4-5 Custom Hole Pattern... 2 Custom Length Hinges... 2 D Dutch Door Hinges... 3 E Electrical Modifications
STAINLESS STEEL CONTINUOUS HINGES
STAINLESS STEEL ONTINUO HINGES ID stainless steel hinges are full height piano hinges that provide support for the full height of the door. For doors up to 600 lbs. 0 maximum door width Hinge leafs are
WARRAntY & HInGE types
McKinney Warranty McKinney products are guaranteed to be free of defects in both workmanship and materials for a period of one year. Any bending, defacing or modification of our product after leaving the
DOORS, HINGES, PIVOTS
Section Table of Contents DOORS,, PIVOTS SECTION 3 D Door Frames... 94 Doors... 94 Door Sweeps... 96 H Hinges... 95 100 N P Hinge Pins... 99 NSP Pivots... 100 Pivots... 100 Vendors ABH... 95 Adams Rite...
CONTINUOUS HINGES ALUMINUM GEARED HINGES
ID ONTINUO GEAR HINGES ONTINUO HINGES ALUMINUM GEARED HINGES ID ontinuous Gear Hinges are all heavy duty. All hinges have double the number of bearings of standard duty hinges and are pin less. There are
Continuous Geared Hinges
Standard Lengths Cal-Royal continuous hinge length provides for actual threshold clearance, head clearance and door height allowances for carpeting. Other lengths may be ordered as non-standard items.
McKINNEY Builder s Hardware Catalog #4
McKINNEY Builder s Hardware Catalog #4 McKINNEY is comprised of a world class team of highly skilled people focused on exceeding customer needs through innovation and flexibility in the manufacture of
Markar Price List Pemko Manufacturing Co.
Markar Price List 2012-2015 Pemko Manufacturing Co. Warranties...3 Terms and Conditions...4-5 Hinge Finishes...6-7 Hinge Numbering System and Standard Lengths...8-9 Continuous Hinge Modifications...10
Markar Price List Pemko Manufacturing Co.
Markar Price List 2012-2014 Pemko Manufacturing Co. Warranties...3 Terms and Conditions...4-5 Hinge Finishes...6-7 Hinge Numbering System and Standard Lengths...8-9 Continuous Hinge Modifications...10
Continuous Hinges NEW! Pricing Guide. Aluminum Geared Stainless Steel Pin & Barrel. Effective August 11, 2008
Pricing Guide Effective August 11, 2008 Replaces January 14, 2008 pricing guide. List prices subject to change without notice. Pin & Barrel PRICE REDUCTION! Effective 9/15/08 See pages 10-11 Continuous
MANUFACTURING INC. Specifications
Page 1 of 4 GENERAL 11 Aluminum security screen doors must be tested by a recognized testing laboratory to conform to SMA 6001-2002 Proposed American National Standard Specifications for Metal Protection
H4545 SERIES. 4-1/2 x 4-1/2 Square Corner Hinges. How To Order H4545 Series. Standard Features. Optional Features FINISH SIZE MODEL PIN OPTION
H4545 SERIES 4-1/2 x 4-1/2 Square Corner Hinges US26D / Chrome USP / Prime Coat US3 / Polished Brass / Stainless Steel n Performance Complies with ANSI A156.1, 1999 (plain bearing and ball bearing) n Performance
Victory Fire Door Inspections
Vickie Evans, FDAI Over 30 years in door and hardware industry DHI instructor and Education Advocate Certified Fire Door Inspector To compartmentalize a building Deter the spread of smoke and flames Fire
Electrical Power Transfer Products
Manufacturing, Inc. Overhead Holders & Stops Hospital Push/Pull Latches Electro-Magnetic Door Holders Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless Steel Edge
Gap solutions. Regain Lost Fire Ratings
Gap solutions Blue-winged Teal - Breeds primarily in the northern prairies and parklands of central North America. Their relative abundance generally increases from west to east, and north to south within
Roton Continuous Geared Hinges
Roton Continuous Geared Hinges You design and build structures that need to withstand the realities of daily use. Hager s engineers and product development team understand how building entrances and exits
Extend the life of your high-traffic doors
08 70 00/SEL BuyLine 1982 Extend the life of your high-traffic doors Unbeatable durability guarantee page 2 U.S. State Department certification page 3 Geared continuous hinges pages 4-5 Pin & Barrel continuous
Gap solutions. Regain Lost Fire Ratings
Gap solutions Blue-winged Teal - Breeds primarily in the northern prairies and parklands of central North America. Their relative abundance generally increases from west to east, and north to south within
McKINNEY Hinge Catalog Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible)
Half Mortise Plain Bearing Hinges Five Knuckle Standard Weight Series (Reversible) T2774 or furnished in : on hinge side specify T4774) 4 1 2 114.3.134 All 5K plain bearing standard weight half mortise
continuous GEARED HingeS
continuous GEARED HingeS Numerical Index: Fasteners: HD1100... CH2 HD1400... CH4 HD1800... CH3 HD2100... CH9 HD2400... CH5 HD2700... CH6 HD4100... CH7 HD4200... CH12 HD5300... CH10 HD5400... CH11 HD5700...
Commercial Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 75-77 Emergency Stop Release... 14 F Fasteners...9-10 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)...
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.
Thermally Broken Framing and Door Installation
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
Architectural Hardware
Architectural Hardware Surface Closers Precision Architectural Closers are designed for heavy duty commercial use. With an adjustable power tension, these closers can handle the lightest ADA Compliant
Contents. The undisputed leader in door accessory hardware /ING BuyLine 2600
08 71 00/ING BuyLine 2600 STEELCRAFT The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application
Architectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 85-87 Emergency Stop Release... 14 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)... 20, 27, 30 Detention
Gap solutions. Regain Lost Fire Ratings
Gap solutions Blue-winged Teal - Breeds primarily in the northern prairies and parklands of central North America. Their relative abundance generally increases from west to east, and north to south within
Heavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
This section describes the design requirements and materials/products for door hardware.
Facilities Division Standards Section 08710 Door Hardware SUMMARY This section describes the design requirements and materials/products for door hardware. DESIGN REQUIREMENTS Coordinate with the McCarran
PRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
McKINNEY Hinge Catalog Hinge Types
Hinge Types McKINNEY offers the broadest range of full mortise hinges in a variety of metals, finishes, sizes, and weights to meet all your load bearing and security applications. They include two, three,
Architectural Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 84-86 Emergency Stop Release... 15 D Detention Food Pass Through Hinge... 36 Detention Hinge (IHT)... 24, 32, 35 Detention
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
Masonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
Product Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-33-5625 2 Table of Contents Full Mortise Hinges, Standard Weight... Full Mortise Hinges, Heavy Weight... 8 Half Mortise Hinges, Standard Weight... 8 Full Mortise
400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages
Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting
Architectural Hinges. General Information
DETERMINE TYPE OF HINGE What is the door material (wood, stainless steel, fiberglass, or hollow metal)? What is the frame material (wood, stainless steel, channel iron, or hollow metal)? Hinges are manufactured
BB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
BUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
Contents. The undisputed leader in door accessory hardware /ING BuyLine 2600
The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application flexibility and superior value.
PRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
Your global resource for quality commercial door hardware. Euroline Catalog Euroline Catalog
Your global resource for quality commercial door hardware. Catalog Catalog More for your door than any other brand. TM Industry-Leading Service For more than 158 years, Hager Companies has led the industry
BUILDERS HARDWARE Catalog Number 134 July 2010
BUILDERS HARDWARE Catalog Number 134 July 2010 Bommer Industries, Inc. P.O. Box 187 19810 Asheville Highway Landrum, South Carolina 29356 www.bommer.com Phone : 864-457 - 3301 Phone : 800-334 - 1654 Fax
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
Installation Instructions. 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC & UL-10C
Installation Instructions 45 and 60-Minute Fire-Rated Neutral Pressure Veneered Door Frame UBC 7-2-1997 & UL-10C Door Requirements: Consult the door manufacturer to make sure that the doors are qualified
s tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
ANSI/BHMA A Revision of ANSI/BHMA A
ANSI/BHMA A156.26-2012 Revision of ANSI/BHMA A156.26-2006 AMERICAN NATIONAL STANDARD FOR CONTINUOUS HINGES SPONSOR BUILDERS HARDWARE MANUFACTURERS ASSOCIATION, INC. Revision B 2/15/2017 Formatted: Centered
Product Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
LIST PRICING. Standard Door Modifications
Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct
2010 Condensed Catalog
2010 Condensed Catalog INDUSTRY-LEADING SERVICE The Hager products on the following pages are known and used the world over because of their legendary quality and practical value. But for 160 years, Hager
HINGES SPECIFICATIONS. Hinge Chart - General Specifications
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
Phone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels
Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will
Door Closers. General Information
General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other
STC 42 3-Sided Single Frame (Double Rabbet Only)
(Toll Free) Phone 866-452-1845 Fax 910-452-1848 STC 42 3-Sided Single Frame (Double Rabbet Only) FRAME PART DIMENSIONS E E THROAT THROAT MINIMUM 3 5/16" MAXIMUM 13" D A=Jamb Depth MINIMUM 4 5/16" MAXIMUM
Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing.
Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing. 1 Feeney makes it easy The CableRail cable infill system is slender,
STOPS. TRIMCO# 1207 B 2-1/4 P 3-3/4 EYE 7/8 x 2-1/4 HOOK 2-3/4 BHMA L01351
STOPS TRIMCO# 1201 1201-5 1201CK B 2-1/4 3 2-3/4 H 3 5 3 BHMA L02131 L02131 L02131, SS Floor Stop - Cast 1201CK is a heavy duty, high-abuse school design with reduces tampering and loss of rubber bumper.
Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors
Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...
4 1/2" x 4 1/2" x 3/16" Thick Stainless Steel, Investment Cast Full Mortise, Hospital Tip
NW 645FM STAINLESS STEEL HINGE Material: Stainless Steel, Investment Cast Pin: Stainless Steel, Concealed & Non-Removable Bearings: Anti-Friction Bearings, Maintenance-Free Capacity: 300lb Door (3 Hinges)!"
PRL GLASS PANIC HANDLES DOOR MANUAL PL100 PANIC HANDLE PL100-A SERIES. For all glass doors
DOOR MANUAL PL100 PANIC HANDLE SERIES For all glass doors Content of this manual: DOOR FABRICATION ( panic handle installation ) - page 3 Parts list, tools & supplies required Installation of handle to
Seamed Edge Doors 1000 Series
Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge Closer Reinforcement Reversible
Fine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
What Is a Continuous Geared Aluminum Hinge
What Is a Continuous Geared Aluminum Hinge Unlike a conventional hinge, a Continuous Geared Aluminum Hinge has no pin. Also it is not like a piano hinge either, which has 50% of each knuckle cut awa, and
DOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
Ives - Residential 07 WINDOW LOCKS 2 ELBOW CATCH 25 SCREEN DOOR PULL 026 BAR WINDOW LIFT
07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-AMERICAN BUILDING
Price List #9. Effective May 1, 2013 Supercedes all previous price lists. Table of Contents
Price List #9 Effective May 1, 2013 Supercedes all previous price lists Table of Contents Target-1 Quick Ship... 3 Overhead ers & s... 4-6 Hospital Push/Pull Latches... 7-9 Electro-Magnetic ers... 10 Electrical
CYCL E STAT IO N. High Capacity
CYCL E STAT IO N High Capacity The Dero Cycle Station provides high-capacity, covered bike parking for bicycle commuters. With a high roof and open platform, the Dero Cycle Station allows bike corrals,
Introduction. BAHCO g Boston Architectural Hinge Company. Dear Customer,
g Introduction Dear Customer, Welcome to. BAHCO is a manufacturer and distributor of architectural grade hinges in the greater Boston area. At BAHCO we have a motivated team of people who are driven by
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
Measuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware
Recommendations for Measuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware By Keith E. Pardoe Speed, accuracy, and above all consistency are essential when determining the clearance
Hinge not swaged figure 1. Hinge not swaged figure 2. Hinge swaged (standard) figure 3. Hinge swaged (standard) figure 4 16 "
MAYFLOWER SALES COMPANY, INC. General General Architectural Hinge The hinges are one of the most active components of an opening combined with the lock, exit device, and closers. Hardware in general is
Price List #10 Effective February 6, 2017 Supercedes all previous price lists
Price List #10 Effective February 6, 2017 Supercedes all previous price lists Table of Contents TARGET 1 Quick Ship... 3 Overhead Holders & Stops... 4-6 Hospital Push/Pull Latches... 7-10 Electromagnetic
STC 46 3-Sided Paired Frame (Double Rabbet Only)
(Toll Free) Phone 866-452-1845 Fax 910-452-1848 STC 46 3-Sided Paired Frame (Double Rabbet Only) FRAME PART DIMENSIONS E E THROAT THROAT MINIMUM 3 5/16" MAXIMUM 13" D A=Jamb Depth MINIMUM 4 5/16" MAXIMUM
Installation Instructions. 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC & UL-10C
Wood Doors Installation Instructions 45 and 60-Minute Positive Pressure Fire-Rated Veneered Door Frame UBC 7-2-1997 & UL-10C Positive Pressure Category Requirements: Category C The Maiman Company Fire
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
EXTRUTECH PLASTICS, INC. Custom Extruder of Close Tolerance Profiles
PVC SINGLE DOOR INSTALLATION INSTRUCTIONS Single Pre-Hung Doors are shipped assembled in most cases ready for installation. Check the sill; in some cases you may want a sill in this door or if not requested
THIS PAGE INTENTIONALLY LEFT BLANK
THIS PAGE INTENTIONALLY LEFT BLANK Seamed Edge Doors 1000 Series 16 and 18 Gauge Doors Cold Rolled or Galvanized Steel Tight Corner Seam Full Body Polystyrene Core or Honeycomb Core Non-Handed Design 12-Gauge
INSTALLATION INSTRUCTIONS 480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery COMPARTMENT
480-4SBB / 480-6SBB SURFACE MOUNT BOX w/battery PARTMENT 4-5/8 [117mm] 1-3/4 [44mm] 4X HOLES 4-5/8 [117mm] 4X INTEGRAL PINS BATTERY PARTMENT ACCESS COVER BLACK ABS MATERIAL BOX EQUIPPED FOR WIRED OR WIRELESS
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
Ives - Residential #07 WINDOW LOCKS #2 ELBOW CATCH #25 SCREEN DOOR PULL #026 BAR WINDOW LIFT
#07 WINDOW LOCKS Material Brass or Aluminum Vertical and horizontal cam action for snug non rattling fit Heavy gauge spring for long wearing action Meets ANSI A156.16 Include screws ABS-American Building
Testing and CE Marking
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Testing and CE Marking In distinct contrast to the modular nature of the Briton 560-0 Series, the long established
Toilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
HIT-30 ALUMINUM DOOR SERIES OWNERS MANUAL
HIT-30 ALUMINUM DOOR SERIES OWNERS MANUAL INSTALL LOCKS LATCHES LEVERS / PADDLES INDICATORS STRIKES Every Installation Is A Self-Portrait Of The Person Who Did It! Autograph Your Work With Excellence!
Heavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation
condensed catalog Push Plates Door Pulls Door Stops Bolts & Latches Kick Plates Custom Designs
condensed catalog Push Plates Door Pulls Door Stops Bolts & Latches Kick Plates Custom Designs Introduction For over 60 years, Rockwood Manufacturing Company has taken pride in its reputation for producing
TE 526 3D Manufactured of solid stainless steel for flush commercial doors
1 TE 526 3D Manufactured of solid stainless steel for flush commercial doors Technical Details load capacity 264 lbs overall length 6.102 " width (door) 1.024 " width (frame) 1.024 " router bit Ø 3/4 "
Solid Core Wood Door / Steel Frame Packages
Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0
B. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
FENCE INSTALLATION GUIDE 8 HIGH WALLS
FENCE INSTALLATION GUIDE 8 HIGH WALLS 1.866.648.9336 www.simtekfence.com INSTALLATION GUIDE These instructions are designed to assist both professional installers and do-it-yourselfers of SimTek decorative
Instructions for the installation of Ellison Bronze balanced door models #137 & 138
1. A packing list will be found in crate No. 1 of each shipment. The parts in the crates should be checked with this list. If there is any discrepancy, notify Ellison Bronze at once. 2. All parts are numbered.
BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120