Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
|
|
- Debra Horn
- 6 years ago
- Views:
Transcription
1 Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL certified, CB Report m operation Low cost, low profile, open-frame 1W SMD isolated DC/DC converters available with (R1SX) or (R1DX) outputs. The R1SX is available with 3.3V or 5V inputs and offers a unregulated 3.3V or 5V output. The R1DX operates from 5V and offers ±5, ±9, ±12 or ±15 outputs. There is no minimum load requirement and the quiescent consumption is less than 1mW. Standard isolation is 1kVDC/1s and a /H version with 3kVDC/1s is available. The operating temperature is from - C up to + C without derating. The pin-out is industry standard and compatible with the R1S/R1D series, but at half the height. The converters are fully certified to IEC/EN/UL62368 and IEC/EN/UL9 and are / RoHS-conform. Class A EMC conformity requires only an input capacitor and a simple low cost LC filter is all that is needed for Class B EMC. Standard packaging is tape and reel. DC/DC Converter 1 Watt SMD Single & Dual Output 3 3 YEAR w a r r a n t y Selection Guide Part nom. Input Output Output Efficiency max. Capacitive Number Voltage Voltage Current typ. (1) Load (2) [VDC] [VDC] [ma] [%] [µf] R1SX R1SX R1SX R1DX-5 5 ±5 ± 78 ± R1DX-9 5 ±9 ±56 78 ±4 R1DX ±12 ±42 ±2 R1DX ±15 ±33 ±2 Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resistive load Model Numbering Output Power Single or Dual nom. Input Voltage R1_X- /_ -R Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second) Tape and Reel Packaging Isolation Voltage (3) nom. Output Voltage E IEC/EN certified UL certified IEC/EN9-1 certified C22.2 No certified CB Report EN532 compliant EN524 compliant Ordering Examples: R1SX-3.5-R 3.3Vin 5Vout Single Output 1kVDC/1 second isolation tape and reel packaging R1DX-5-R 5Vin ±5Vout Dual Output 1kVDC/1 second isolation tape and reel packaging R1SX-5/H-R 5Vin 5Vout Single Output 3kVDC/1 second isolation tape and reel packaging R1DX-515/H-R 5Vin ±15Vout Dual Output 3kVDC/1 second isolation tape and reel packaging REV.: 3/18 ECO-1
2 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter Input Voltage Range ±.% Quiescent Current Minimum Load % Internal Operating Frequency khz khz khz Output Ripple and Noise (4) MHz BW mvp-p Notes: Note4: Measurements are made with a.1µf MLCC across output. (low ESR) capacitor ma Efficiency vs. Load R1SX (/H) SX R1SX-xx5(/H) DX-xx5 Efficiency [%] Efficiency [%] 3.3Vin 5Vin R1DX-5xx(/H) Efficiency [%] 5Vout 9Vout 12Vout 15Vout ECO-2 REV.: 3/18
3 REGULATIONS Parameter Condition Value Output Accuracy ±5.% max. Line Regulation low line to high line ±1.2% typ. at ±1.% of Vin typ. Load Regulation % to % load output output 3.3VDC 5VDC 3.3VDC, 5VDC 9VDC, 12VDC, 15VDC.% typ. / 15.% max. 7.% typ. / 15.% max..% typ. / 15.% max. 8.% typ. /.% max. Cross Regulation output only ±6.5% max. Tolerance Envelope +15% R1SX (/H) +15% R1SX-xx5(/H) R1DX-53.3(/H) +% -1% +7% -1% +15% R1DX-5(/H) R1DX-9(/H) +9% -2% +% +7% -1% R1DX-512(/H) R1DX-515(/H) +% -1% REV.: 3/18 ECO-3
4 PROTECTIONS Parameter Type Value Isolation Voltage Isolation Resistance Isolation Capacitance Leakage Current Insulation Grade Protection Circuit I/P to O/P I/P to O/P standard with suffix /H standard with suffix /H tested for 1 second rated for 1 minute (5) tested for 1 second rated for 1 minute (5) 1kVDC VAC 3kVDC 1.5kVAC GΩ min. pf max. pf max. 1µA max. 3µA max. functional Single Output Dual Output +Vin F1 L1 +Vout +Vin F1 L1 +Vout Com -Vin -Vout -Vin -Vout Notes: Note5: Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage Refer to local wiring regulations if input over-current protection is also required. Recommended fuse: T1A slow blow type ENVIRONMENTAL Parameter Condition Value Operating Temperature Range Operating Altitude full load (refer to derating graph) - C to + C - C to +95 C Operating Humidity non-condensing 5% - 95% RH max. Pollution Degree Vibration MTBF according to MIL-HDBK-217F, G.B. +25 C + C +25 C +95 C m PD2 according to MIL-STD-2G 21 x ³ hours 7 x ³ hours x ³ hours 7 x ³ hours continued on next page ECO-4 REV.: 3/18
5 Derating Graph Chamber and natural convection.1m/s) Single Output Ambient Temperature [ C] Dual Output Ambient Temperature [ C] 95 SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety E UL9-1, 2nd Edition 14 CAN/CSA C22.2 No , 2nd Edition 14 Information Technology Equipment, General Requirements for Safety (CB) IEC9-1:5 2nd Edition + A2:13 E Information Technology Equipment, General Requirements for Safety EN9-1:6 + A2:13 Audio/video, information and communication technology equipment - Safety requirements (LVD) Audio/video, information and communication technology equipment - Safety requirements Audio/video, information and communication technology equipment - Safety requirements (CB) RoHS2+ E E UL62368, 2nd Edition, 14 CAN/CSA -C22.2 No , 2nd Edition, 14 EN :14 + A11:17 IEC :14 2nd Edition RoHS 11/65/EU + AM15/863 EMC Compliance Condition Standard / Criterion Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Information technology equipment - Immunity characteristics Limits and methods of measurement ESD Electrostatic discharge immunity test with external filter (see filter suggestion) R1DX R1SX Air: ±8, 6, 4, 2kV Contact: ±4, 2kV Air: ±8, 6, 4, 2kV Contact: ±4, 2kV EN532:15, Class B EN524: +A1:15 IEC-4-2:8, Criteria A IEC-4-2:8, Criteria B Radiated, radio-frequency, electromagnetic field immunity test 3 V/m IEC-4-3:6 + A2:, Criteria A Fast Transient and Burst Immunity ±.5kV IEC-4-4:12, Criteria A Surge Immunity R1DX only R1SX ±.5kV IEC-4-5:14, Criteria B IEC-4-5:14, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields 3V r.m.s. IEC-4-6:13, Criteria A Power Magnetic Field Immunity Hz / 1A/m IEC-4-8:9, Criteria A continued on next page REV.: 3/18 ECO-5
6 EMC Filtering Suggestions for EN532 Single Output C2 Dual Output C2 +Vin L1 +Vout +Vin L1 +Vout Com. -Vin -Vout -Vin -Vout Component Liss Class A Model C2 L1 R1SX-3.3xxS R1SX-5xxS 22µF MLCC 4pF/4kVDC N/A R1DX-5xxD µf MLCC µh SMD Inductor Component Liss Class B Model C2 L1 R1SX-3.3xxS R1SX-5xxS R1DX-5xxD 22µF MLCC µf MLCC 4pF/4kVDC 3.3µH SMD Inductor 4.7µH SMD Inductor µh SMD Inductor DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Package Dimension (LxWxH) Package Weight Dimension Drawing R1SX (mm) Case PCB black plastic (UL94V-) FR4 (UL94V-) x 11. x 5.mm x 11. x 8.mm 1.g typ. 1.2g typ. CG Bottom View /-.25 Recommended Footprint Details 8 5 Top View Pin Connection Pin # Single 1 -Vin 2 +Vin 4 -Vout 5 +Vout 8 NC CG= center of gravity NC= no connection Tolerance: xx.x= ±.5mm xx.xx= ±.25mm Pin Thickness: Lenght: ±.5mm +.25/-.mm 3x2.54= 7.62 continued on next page ECO-6 REV.: 3/18
7 Dimension Drawing R1DX (mm) CG x2.54= Bottom View max Recommended Footprint Details Top View Pin Connection Pin # Dual 1 -Vin 2 +Vin 4 Com. 5 -Vout 7 +Vout NC CG= center of gravity NC= no connection Tolerance: xx.x= ±.5mm xx.xx= ±.25mm Pin Thickness: Lenght: ±.5mm +.25/-.mm INSTALLATION and APPLICATION Isolated Bus R1SX-3.5 +V in +V OUT C2 3.3V 5V -V in -V OUT C3 GND IC 1 C4 IN B OUT A GND ISOLATION OUT B IN A GND Block diagram of an isolated data interface with 3.3V to 5V logic level shifting. Typcial Applications include microcontroller interfacing, logic level translation and multi-channel test and measurement systems. continued on next paege REV.: 3/18 ECO-7
8 Isolated DAC (±VDC) +V in R1DX-512/H AV DD +12V R-78E V 5V -V in -12V AV SS DGND Vcc D VDD CS R FB AV DD ISOLATION CLK SDI DAC I OUT V R1 V OUT ±V 3kV isolation SDO GND AV SS -12V R2 GAIN= R1+R2 R2 DGND DGND PACKAGING INFORMATION Packaging Dimension (LxWxH) Packaging Quantity Tape Width Storage Temperature Range Storage Humidity tape and reel (carton) reel 355. x 3. x 35.mm 3.2 x 3.2 x.mm 4pcs 2pcs 24.mm -55 C to +125 C 5% - 95% RH max. The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. ECO-8 REV.: 3/18
Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368
More informationPackaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationNotes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
More informationHigh power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
More informationFeatures. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
More information3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications
Features Unregulated Converters Description 3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V- package material Efficiency up to 84% Suitable for IGBT applications The RK and
More informationFeatures. Regulated Converter RAC Watt Single Output. AC/DC Converter
Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II
More informationFeatures. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More informationPinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
More informationFeatures. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter
Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationFeatures. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationParameter Condition Min. Typ. Max. Internal Input Filter. refer to line derating graph on PA-4 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input 85-35VAC 3W PCB mount package
More informationFeatures. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter
Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
More informationFeatures. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter
Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationFeatures. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationNote1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single
Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout
More informationFeatures. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationFeatures. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter
Features Regulated Converter Description Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationEfficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
More informationFeatures. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
More informationNotes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
More informationOutput Current 1.2VDC 1.5VDC 1.5VDC 1.2VDC 1.5VDC 1.5VDC 0.65VDC. Vout=3.6VDC 180µA. Vout=1.8VDC, use E-cap 330µF Vout=3.3VDC and 3.6VDC.
Features Switching Regulator Description The is a DC/DC boost converter designed to run from single cell batteries. The input voltage range of.65v-3.3v means that alkaline, NiCd, NiMH, zinc-carbon or lithium
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter
Features Switching Regulator Description Efficiency up tpo 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections Description The is a switching regulator with a wide input voltage range, high effi ciency
More informationNote1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
More informationFeatures. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationFeatures. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationNote1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)
Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationFeatures. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationFeatures. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter
Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,
More informationFeatures. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationFeatures. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationFeatures. Switching Regulator. 2,3,4 Amp SIP12 Vertical & Horizontal Single Output. R-7xxxP_D. R-7 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4Amp adjustable positive step down Integrated switching regulator Over load protection
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationFeatures. Switching Regulator. 1-2 Amp SIP12 Vertical & Horizontal Single Output. R-6xxxP_D. R-6 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Adjustable output voltage 1-2AMP adjustable positive step down integrated switching regulator Internal short circuit protection ON/OFF control (ground
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
More informationFeatures. Switching Regulator. 2,3,4,5 Amp SIP12 Vertical & Horizontal Single Output. R-5xxxPA_DA. R-5 xa. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4 & 5AMP adjustable positive step down integrated switching regulator Over load protection
More informationUL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
More information4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p
Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up
More information15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
More informationAdd suffix /W/X3 for wired version with both analogue and PWM dimming controls (six wires) (a)
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature
More information500 ma DC-DC Step Down Converter P78G-Series
500 ma DC-DC Step Down Converter -Series Pin compatible to linear 78xx regulator (TO-220) Not isolated Efficiency up to 95 % Input voltage range up to 6 V Positive or negative output voltage possible Operating
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationFor more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
More informationRPP20-W. Features ICE Technology* POWERLINE+ 20 Watt 4:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C Minimum Temp. UL Certified Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed
More informationRPP30. Features ICE Technology* POWERLINE+ 30 Watt 2:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C MinimumTemp. Built-in FCC/EN55022 Class B Filter 2:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed or Baseplate
More informationSpecifications ( typical at 25 C, nominal input voltage, rated output current unless otherwise specified )
Features Regulated Converters Description UL Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature Protected
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationDC/DC Converter K78_T-500R3 Series
Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit
More informationDN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package
DN03S/D Series DC/DC CONVERTER 2-3W, DIP-Package FEATURES DIP-24 Plastic Package Wide 2:1 Input Range Operating Temp.Range -40 to +85 C Overload Protection No Minimum Load Requirement Isolation voltage
More informationFED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
More informationAdd suffix /SMD/OF for open frame version with SMD solderpins (/SMD/OF-R for Tape and Reel Packaging) (b)
Features Regulated Converters Description UL Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature Protected
More informationFED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly
More informationOrdercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
More informationOutput Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More informationTMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
More informationSeries AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
More informationDC/DC Converter K78xx-500R2 Series
Converter K78xx-5R Series Wide input voltage, non-isolated & regulated single output Patent Protection RoHS FEATURES Efficiency up to 96% Operating temperature range: -4 to + Low ripple & noise Supporting
More informationDC/DC Converter VRA_YMD-6WR3 & VRB_YMD-6WR3 Series
6W isolated - converter in YMD package Wide input voltage and regulated dual/single output CB Patent Protection RoHS FEATURES Wide 2:1 input voltage range High efficiency up to 88% No-load power consumption
More informationCB Patent Protection RoHS
1W, Fixed input voltage, 42VAC or 6VDC isolated & unregulated positive-negative dual/single output Selection Guide Certification Part No. -- H35S-1WR2 UL CB Patent Protection RoHS G55S-1WR2 Input Voltage
More informationMTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Hi Pot Test Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 69 recognised 3.3V, 5V, 12V,
More informationhttp://www.mmtmachrone.com 96D SERIES FEATURES: 30W DIL PACKAGE Recognized By UL 60950-1 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOMIZED SOLUTIONS AVAILABLE RoHS
More informationEncapsulated Power Supply
0 Watt Features AC/DC Power Modules PCB Mounting or Chassis Mounting with Screw Terminals Fully encapsulated Plastic Case Single, Dual and Triple Output Models Universal Input 8- VAC, 7-0 Hz High Efficiency
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationMAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
More informationRipple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationEfficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
More informationMTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material 3.3V, 5V, 12V,
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationMI2000ERW. Series. Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers. Key Features:
MI2000ERW Miniature 1 x 1 20W, Ultra-Wide 2:1 Input DC/DC Con vert ers Key Features: 20W Output Power 2:1 Input Voltage Range Miniature 1 x 1 Case 1,500 VDC Isolation Meets CISPR 32/EN 55032 High Efficiency
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Efficiency up to 88% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 94V- Package material
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationDC/DC Converter G_S-2WR2 & H_S-2WR2 Series
2W, Fixed input voltage, 42VAC or 6VDC isolated & unregulated positive-negative dual/single output Selection Guide Certification UL/CE Part No. G55S-2WR2 Input Voltage (VDC) Output Efficiency Nominal Output
More informationhttp://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT
More informationOutput Current Input Current Load Regulation
PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V
More information(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
More informationDC/DC Converter B_XT-2WR2 Series
2W, Fixed input voltage, isolated & unregulated single output Selection Guide Patent Protection RoHS FEATURES Operating temperature range: -4 to +15 High efficiency up to 84% Compact SMD package Isolation
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationCB Patent Protection RoHS
2W, Fixed input voltage, isolated & unregulated dual /single output FEATURES Continuous short-circuit protection Operating temperature range: -40 to +85 High efficiency up to 85% High power density DIP
More information6S8W_3RP Series 6W - Dual/Single Output - Wide Input - Isolated & Regulated DC-DC Converter
6 Watt Highest power density in SIP8 package Low profile (L*W*H=21.8*9.2*11.1 mm) 2:1 wide input voltage range Isolation 3000VDC High Efficiency up to 88% Short circuit protection (SCP; (automatic recovery)
More informationA_(X)T-1W Series 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL OUTPUT DC-DC CONVERTER ULTRAMINIATURE SMD PACKAGE
A_(X)T-1W Series 1W, FIXED INPUT, ISOLATED & UNULATED DUAL OUTPUT - CONVERTER ULTRAMINIATURE SMD PACKAGE FEATURES Small Footprint SMD Package Efficiency up to 79% 1KV Isolation Operating Temperature Range:
More information