Features. Switching Regulator. 2,3,4,5 Amp SIP12 Vertical & Horizontal Single Output. R-5xxxPA_DA. R-5 xa. DC/DC Converter
|
|
|
- Lenard Norman
- 5 years ago
- Views:
Transcription
![Selection Guide Part Input Output Vout Output Efficiency Max. Capacitive Number Voltage Range Voltage Adjust Range () Current @ min Vin @ max. Vin Load (2) [VDC] [VDC] [VDC] [A] [%] 2V [%] [µf] R-52.](/docs-images/87/96970261/images/1-4.jpg "2xA 4.5-8.2. - 3. 2 83 79 75 3/6 R-52.8xA 4.5-8.8. - 4.5 2 88 85 82 3/6 R-522.5xA 4.5-8 2.5.6-5.5 2 9 88 86 3/6 R-523.3xA 4.5-8 3.3.6-5.5 2 92 9 89 3/6 R-525.xA 6.5-8 5. 3. - 5.5 2 95 93 92 3/6 R-53.")
1 Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4 & 5AMP adjustable positive step down integrated switching regulator Over load protection Continuous short circuit protection Efficiency up to 96% The R-5xxxA series is a high performance.2v to 5.5V, 2Amp to 5Amp, 2-Pin SIP (single in-line package) integrated switching regulator (ISR). The synchronous - rectified design yields excellent efficiencies up to 96%. Short circuit protection reduces the short circuit input current to under 5mA. Autosense function compensates for any losses in long circuit loops. Selection Guide Part Input Output Vout Output Efficiency Max. Capacitive Number Voltage Range Voltage Adjust Range () min max. Vin Load (2) [VDC] [VDC] [VDC] [A] [%] 2V [%] [µf] R-52.2xA /6 R-52.8xA /6 R-522.5xA /6 R-523.3xA /6 R-525.xA /6 R-53.2xA /6 R-53.8xA /6 R-532.5xA /6 R-533.3xA /6 R-535.xA /6 R-54.2xA /6 R-54.8xA /6 R-542.5xA /6 R-543.3xA /6 R-545.xA /6 R-55.2xA /6 R-55.8xA /6 R-552.5xA /6 R-553.3xA /6 R-555.xA /6 DC/DC Converter 2,3,4,5 Amp SIP2 Vertical & Horizontal Single Output IEC/EN695- certified Notes: Note: Vin-Vout.5V~4.V depending on Vout if adjust function is used Note2: please refer to basic characteristics Model Numbering Output Current (A) nom. Output Voltage R-5 xa Pinning (3) Notes: Note3: x can be P = vertical through hole x can be D = bent for horizontal through hole mounting Ordering Examples: R-553.3PA Iout= 5A nom. Vout= 3.3VDC P= vertical through hole R-522.5DA Iout= 2A nom. Vout= 2.5VDC D= bent for horizontal through hole mounting REV.: 4/28 I-
2 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Quiescent Current min. Vin to max. 2mA Internal Power Dissipation ta<6 C.4W Output Current Limit R-53xx R-54xx R-55xx Minimum Load % ON/OFF CTRL (4) DC-DC ON DC-DC OFF 2.5A 3.75A 5.A 6.A 3.A 4.25A 5.5A 6.5A Open or high, 4.5V min. / 8V max. Low (Power OFF).8V max. Input Current of CTRL Pin DC-DC OFF µa Internal Operating Frequency 27kHz 3kHz 33kHz Output Ripple and Noise Maximum Capacitive Load R-53xx & R-54xx & R-55xx 4mVp-p mvp-p 7mVp-p 2mVp-p normal start-up time, no external diodes 3µF < second start-up time + diode protection circuit 6µF Notes: Note4: ON/OFF pin driven by TTL (logic gate), open-collector bipolar transistor or open-drain MOSFET How to calculate the max output current The internal power dissipiation (P D ) follows the equation: P D = Iout x Vout x (-Eff max Vin ) Iout= P D Vout x (-Eff max Vin ) Ambient Temperature [ C] Example: R-545.P.5 Internal Power Dissipation [W].4 Calculation : Calculation 2: Vin = 8V Vin = 8V Vout = 5V Vout = 5V.4W Eff max Vin = 93% Iout= = 4.A Eff max Vin = 93% 5V x (-.93 P D =.4W P D = W T Ambient = 6 C T Ambient = 85 C Iout= W 5V x (-.93 ) = 2.857A Calculation 3: Vin = 2V Eff max Vin = 94% P D =.W T Ambient = 85 C Iout= W 5V x (-.94 ) = 3.33A REV.: 4/28 I-2
3 Efficiency vs. Load R-53xx / R-54xx / R-55xx min. Vin min. Vin Efficiency [%] Vout.2Vout Efficiency [%] Vout.2Vout Output Load [A] Output Load [A] R-53xx / R-54xx / R-55xx Vin=8V Vin=8V 95 9 Efficiency [%] 9 85 Efficiency [%] Vout.2Vout Vout.2Vout Output Load [A] Output Load [A] Trim Tables or Calculation 2ADC R-52.2PA/DA R-52.8PA/DA R-522.5PA/DA R-523.3PA/DA R-525.PA/DA 3ADC R-53.2PA/DA R-53.8PA/DA R-532.5PA/DA R-533.3PA/DA R-535.PA/DA 4ADC R-54.2PA/DA R-54.8PA/DA R-542.5PA/DA R-543.3PA/DA R-545.PA/DA 5ADC R-55.2PA/DA R-55.8PA/DA R-552.5PA/DA R-553.3PA/DA R-555.PA/DA Vout nom..2vdc.8vdc 2.5VDC 3.3VDC 5.VDC Vout adj. R R2 R R2 R R2 R R2 R R Ω. 3.9kΩ. 3kΩ.5kΩ.2 2.kΩ 27Ω REV.: 4/28 I-3
4 Trim Tables or Calculation 2ADC R-52.2PA/DA R-52.8PA/DA R-522.5PA/DA R-523.3PA/DA R-525.PA/DA 3ADC R-53.2PA/DA R-53.8PA/DA R-532.5PA/DA R-533.3PA/DA R-535.PA/DA 4ADC R-54.2PA/DA R-54.8PA/DA R-542.5PA/DA R-543.3PA/DA R-545.PA/DA 5ADC R-55.2PA/DA R-55.8PA/DA R-552.5PA/DA R-553.3PA/DA R-555.PA/DA Vout nom..2vdc.8vdc 2.5VDC 3.3VDC 5.VDC Vout adj. R R2 R R2 R R2 R R2 R R2.3 37kΩ 3.7kΩ 75Ω.5.5kΩ kω 2.KΩ 39Ω.6 8.2kΩ 8kΩ 3.KΩ 75Ω.7 6.5kΩ 4kΩ 4.KΩ.2kΩ.8 5.2kΩ 5.6KΩ.7kΩ.9 4.3kΩ 36kΩ 7.5KΩ 2.2kΩ kΩ.8kΩ.5KΩ 2.8kΩ kΩ 5.2kΩ 82KΩ 6.8kΩ 2.5.8kΩ 4.3kΩ 8.5kΩ kΩ 3.6kΩ 33kΩ.5kΩ 3..5kΩ 2.kΩ 6.2kΩ 33kΩ 47Ω kΩ 4.kΩ kω.6kω 3.3.5kΩ 3.4kΩ 2.2kΩ kΩ 2.9kΩ 36kΩ 3.kΩ 3.6.7kΩ 2.2kΩ kω 4.7kΩ 3.9 7Ω.4kΩ 4.7kΩ 8.5kΩ Ω 65Ω.6Ω 3kΩ Ω 82Ω 22kΩ 5. 29Ω 6Ω 5. 22Ω 56Ω 28kΩ Ω 9Ω 2.6kΩ REGULATIONS Parameter Condition Value Output Accuracy Line Regulation Load Regulation (5) Transient Response (6) low line to high line, full load % to %, full load 5% load step change Vout Over / Undershoot R-53xx & R-54xx & R-55xx R-53xx & R-54xx & R-55xx Notes: Note5: Operation below % load will not harm the converter, but specifications may not be met Note6: Requires a µf electronic or tantalum output capacitpr for proper operation in all applications (the capacitor has to be placed as close as possible to the output pins): µf for x, R-53xx and R-54xx, 22µF for R-55xx ±.% typ. / ±2.% max. ±.25% typ. / ±.5% max. ±.5% typ. / ±.% max. ±.5% typ. / ±.% max. ±.% typ. / ±2.% max. µs typ. / 2µs max. mv max. REV.: 4/28 I-4
5 Line Regulation R-53xx / R-54xx / R- 55xx Line Regulation [%].5 Line Regulation [%] Output Voltage [V] Output Voltage [V] Load Regulation R-53xx / R-54xx / R- 55xx Load Regulation [%] Vout.2Vout Load Regulation [%] Vout.2Vout Input Voltage [V] Input Voltage [V] PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Short Circuit Input Current 5mA max. REV.: 4/28 I-5
6 Optional Diode Protection Circuit Add a blocking diode to Vout if current can flow backwards into the output, as this can damage the converter when it is powered down. Protection diodes are required for high capacitive loads. Optional Protection : Optional Protection : D R-5/6/7xxx R-5/6/7xxx V adj D The diode can either be fitted across the divice, if the source is low impedance or fitted in series with the output (recommended). R R: Trim output voltage up to diode drop ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without natural convection.m/s -4 C to +85 C Maximum Case Temperature + C Thermal natural convection.m/s 25 C/W Operating Humidity non-condensing 95% RH max. Operating Altitude Pollution Degree MTBF according to MIL-HDBK 27F, G.B. +25 C +85 C 2m PD2 749 x 3 hours 5 x 3 hours SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety IEC695-:25, 2nd Edition + AM2:23 EN695-:26 + AM2:23 EAC RU-AT TP TC 4/2 RoHS 2+ RoHS-2/65/EU + AM-25/863 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material Dimension (LxWxH) Weight case potting non-conducive black plastic, (UL94 V-) epoxy, (UL94 V-) 32.2 x 9. x 5.mm REV.: 4/28 I-6 9g typ.
7 Dimension Drawing (mm) 32.2 R-5xxxDA 5. embossed logo R-5xxxPA 5. Marking / ±.5 x 2.54 = Recommended Footprint Details / ± Recommended Footprint Details Bottom View 7. Top View Bottom View x 2.54 = Top View 2.54 Pin Connections Pin # Single Description ON/OFF Input pin: Active low (less than.8v) to disable the device 2,3,4 Vin Power Input 5, 6, 7, 8 Input and Output ground (common) 9, Vout Power output Vout (Auto Sense) If unused this pin must be connected to Pin 9 and 2 Vadj With external resistors R, R2 to selected output voltage Tolerance: xx.x= ±.5mm xx.xx= ±.25mm INSTALLATION AND APPLICATION Standard Application Circuit OFF µf (Optional) ON V CTRL C Q ON/OFF V adj R down R up C2 µf ESR= 5mΩ max. (Required) Add blocking diode to Vout if current can flow backwards into the output, as this can damage the converter. (Please refer to Optional Diode Protection Circuit on page I-6) REV.: 4/28 I-7
8 Parallel Application Circuit The, R-53xx, R-54xx series can be used in parallel to upgrade the output current capacity for the same output voltage. For example, the R-543.3PA can parallel up with another R-554.3PA to give up to 8 amps or with the R-533.3PA or R-23-3PA types to give output currents of up to 7 amps or 6 amps. The R-55xx series cannot be paralleled. 2 3 U 2 ON/OFF Control C µf/25v (REQ D) C2- µf/v (REQ D) V out C2-2 µf/v (REQ D) U2 2 must be connected together ponent side Solder side 2 C +Vin 2 U U C2-2 U2 2 U2 Keep 2mm to 5mm distance between both converters +Vout Sense C2-2 To Load PACKAGING INFORMATION Parameter Type Value Packaging Dimensions (LxWxH) R-5xxxDA R-5xxxPA 52. x 2. x 9.mm 53. x 23. x 9.mm Packaging Quantity tube 5pcs Storage Temperature Range -4 C to +25 C The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. REV.: 4/28 I-8
Features. Switching Regulator. 2,3,4 Amp SIP12 Vertical & Horizontal Single Output. R-7xxxP_D. R-7 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4Amp adjustable positive step down Integrated switching regulator Over load protection
Features. Switching Regulator. 1-2 Amp SIP12 Vertical & Horizontal Single Output. R-6xxxP_D. R-6 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Adjustable output voltage 1-2AMP adjustable positive step down integrated switching regulator Internal short circuit protection ON/OFF control (ground
Features. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
Features. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter
Features Switching Regulator Description Efficiency up tpo 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
Features. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
Features. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
Features. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
Features. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications
Features Unregulated Converters Description 3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V- package material Efficiency up to 84% Suitable for IGBT applications The RK and
Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections Description The is a switching regulator with a wide input voltage range, high effi ciency
Features. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
Pinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
Notes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
Features. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
High power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
Features. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
Parameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
Parameter Condition Min. Typ. Max. Internal Input Filter. refer to line derating graph on PA-4 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input 85-35VAC 3W PCB mount package
Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
Features. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
Output Current 1.2VDC 1.5VDC 1.5VDC 1.2VDC 1.5VDC 1.5VDC 0.65VDC. Vout=3.6VDC 180µA. Vout=1.8VDC, use E-cap 330µF Vout=3.3VDC and 3.6VDC.
Features Switching Regulator Description The is a DC/DC boost converter designed to run from single cell batteries. The input voltage range of.65v-3.3v means that alkaline, NiCd, NiMH, zinc-carbon or lithium
Features. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter
Features Regulated Converter Description Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard
Features. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter
Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,
Note1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single
Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout
IEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
Note1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
Notes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
Features. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter
Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical
Packaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
Features. Regulated Converter RAC Watt Single Output. AC/DC Converter
Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II
Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
![Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.](/thumbs/96/127072968.jpg "Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.")
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
Features. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter
Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage
Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
Features. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
Features. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter
Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International
Features. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368
UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
Note1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)
Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
Note1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
Features. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
Note1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Features. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
Add suffix /W/X3 for wired version with both analogue and PWM dimming controls (six wires) (a)
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature
RPP20-W. Features ICE Technology* POWERLINE+ 20 Watt 4:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C Minimum Temp. UL Certified Built-in FCC/EN55022 Class B Filter 4:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed
RPP30. Features ICE Technology* POWERLINE+ 30 Watt 2:1 Single & Dual Output. DC/DC-Converter with 3 year Warranty
Features ICE Technology* Description 115 C Maximum Case Temperature -40 C MinimumTemp. Built-in FCC/EN55022 Class B Filter 2:1 Wide Input Voltage Range Six Sided Shielded Enclosure Ribbed or Baseplate
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
CV SERIES. 1.8 to 45 Watts VDC, VDC, 10-30VDC Input Ranges Adjustable Output Voltage Non-Isolated DC/DC Converters
DATASHEET CV SERIES 2.-.VDC, 4.-4VDC, 0-30VDC Input Ranges FEATURES Output Current up to 3A Output Power Range 2.-.VDC, 4.-4VDC, and 0-30VDC Input Voltage Ranges High Efficiency - 9% at 2VDC and Full Load
FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly Option Voltage Quantity Voltage Range Option
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 W - N HC Series Name Input Output Output Input Remote Control Assembly
DC/DC Converter K78_T-500R3 Series
Wide input voltage Non-isolated and Regulated Single Output RoHS FEATURES High efficiency up to 95% No-load input current as low as 0.2mA Operating ambient temperature range -40 to +85 Output short-circuit
200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
Specifications ( typical at 25 C, nominal input voltage, rated output current unless otherwise specified )
Features Regulated Converters Description UL Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature Protected
For more information, please visit the product page. input voltage 1 range. output voltage
date 9/12/218 page 1 of 1 SERIES: V78E--SMT DESCRIPTION: NON-ISOLATED DC SWITCHING REGULATOR FEATURES 1 A of output current efficiency up to SMT package industrial operating temp -~+ C designed to meet
Add suffix /SMD/OF for open frame version with SMD solderpins (/SMD/OF-R for Tape and Reel Packaging) (b)
Features Regulated Converters Description UL Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit and Overtemperature Protected
Ripple & Max. capacitive Output Current
0 Watts xxx Series Wide 4: Input Range Single Output Industry Standard /4 Brick -40 C to +0 C Operation 0 VDC Isolation Output Trim ±0% Remote On/Off Year Warranty Dimensions: QSC0:. x.4 x 0. (.9 x. x.
Pin-Out Information Pin Function. Inhibit (30V max) Pkg Style 200
PT6 Series Amp Adjustable Positive Step-down Integrated Switching Regulator SLTS29A (Revised 6/3/2) 9% Efficiency Adjustable Output Voltage Internal Short Circuit Protection Over-Temperature Protection
The PT6300 Series is a line of High-Performance 3 Amp, 12-Pin SIP (Single In-line Package) Integrated. Pin-Out Information Pin Function
PT6 Series Amp Adjustable Positive Step-down Integrated Sw itching Regulators SLTSB (Revised 9//) 9% Efficiency Adjustable Output Voltage Internal Short Circuit Protection Over-Temperature Protection On/Off
YNV12T05 DC-DC Converter Data Sheet VDC Input; VDC 5 A
The Products: Y-Series Applications Intermediate Bus Architectures Telecommunications Data communications Distributed Power Architectures Servers, workstations Benefits High efficiency no heat sink required
Switching Regulator. LMT78_1.0R Series Wide input, non-isolated & regulated, single output, SMD package
Efficiency up to 95 No need for heat sinks 1.0AMP SMD package Wide input voltage range (4.75V - 36V) Adjustable output voltage Remote ON/OFF control Short circuit protection (SCP), thermal shutdown Very
Volant NEA005 Series Non-Isolated 5A SIP/SMT DC/DC Converters
Typical units FEATURES Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 92% High reliability RoHS Compliant Cost efficient open frame design Output
VFB400W - QXX - SXXX
date 01/30/2014 page 1 of 10 SERIES: VFB400W DESCRIPTION: DC-DC CONVERTER FETURES 400 W isolated output industry standard full brick package 4:1 input range (9~36, 18~75 ) single regulated outputs from
http://www.mmtmachrone.com 93D SERIES FEATURES: 60W DIL PACKAGE INDUSTRY STANDARD PACKAGE 2:1 WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY UL94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS COMPLIANT
Output Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p
Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up
Output Input Efficiency PARD (mvp-p) Vin Nom. (V)
Features: Small size, minimal footprint SMT/SIP package 5A Output Current (all voltages) High Efficiency: up to 94% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W. Features
PXF40xxWSxx Single Output DC/DC Converter 9 to 36 Vdc and 18 to 75 Vdc input, 3.3 to 15 Vdc Single Output, 40W Features Single output current up to 10A 40 watts maximum output power 4:1 ultra wide input
PXD30-xxWS-xx-Single Output DC/DC Converters
PXD30-xxWS-xx-Single Output DC/DC Converters 9 to 36 Vdc and 18 to 75 Vdc input, 1.5 to 15 Vdc Single Output, 30W Applications Wireless Network Telecom / Datacom Industry Control System Measurement Semiconductor
AS SERIES (2.00 x 1.6 Package) Up to 20 Watt DC-DC Converter
PRODUCT OVERVIEW The AS series offer up to 20 watts of output power in standard 2.00 x 1.60 x 0.45 inches packages. This series features high efficiency and 1500 Volts of DC isolation. The AS series provides
di/dt Nex TM-v Series: YNV12T05
Features PRODUCTS: Nex TM FAMILY Applications Intermediate Bus Architectures Telecommunications Data Communications Servers, Workstations Distributed Power Architectures Benefits High efficiency no heat
(typ.) (Range) Parameter Model Min. Typ. Max. Unit
FEATURES Smallest Encapsulated 20W! Package Size 1.0 x1.0 x0.4 Ultra-wide 4:1 Input Range Very high Efficiency up to % Operating Temp. Range - C to +85 C Output Voltage Trimmable I/O-isolation Voltage
YNV05T06 DC-DC Converter Data Sheet VDC Input; VDC 6A
The Products: Y-Series Applications Intermediate Bus Architectures Telecommunications Data communications Distributed Power Architectures Servers, workstations Benefits High efficiency no heat sink required
Series AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
Output Input Efficiency PARD (mvp-p) Vin Nom. Regulation Max (V)
Features: Small size, minimal footprint SMT/SIP package A Output Current (all voltages) High Efficiency: up to 9% High reliability RoHS Compliant Cost efficient open frame design Output voltage programmable
Series AMLD-Z Up to 1000mA LED Driver
FEATURES: Models Single output Step Down DC/DC LED driver Operating Temperature range -4ºC to +85ºC Constant current output Open and Short LED Protection Ultra Wide (8:) input voltage range PWM/Digital
15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
V78 XX X SERIES: V DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR MODEL PART NUMBER KEY. RoHS
date 04//0 page of 7 SERIES: V78-000 DESCRIPTION: NON-ISOLATED SWITCHING REGULATOR FEATURES A current output extremely high efficiency up to 97% no heat sink required pin compatible to LM78XX linear regulators
Efficiency (typ.) (Range) Load. Output Current Input Current Reflected Ripple
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Ultra Wide 4:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC
YEV09T06 6A DC-DC POL Converter 4.5V to 13.8V Input 0.59V to 5.1V Output Data Sheet
Member of the Family Applications Low voltage, high density systems with Intermediate Bus Architectures (IBA) Point-of-load regulators for high performance DSP, FPGA, ASIC, and microprocessors Desktops,
SIL20C SERIES. Single Output. SIL20C Series 20 A DC-DC Converter C Class Non-Isolated
SIL20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
MAX. OUTPUT POWER 24/48/72/96/110 VDC 5 VDC 6 A 30 W 82% 0RQB-30Y05L. 0 R QB - 30 Y 05 L y. Output Power. Input Range
The 0RQB-30Y05L is an isolated DC/DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage
MI2500RU. Series. Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers. Key Features: Electrical Specifications
MI2500RU Compact, 1 x 1 Inch 25W, 4:1 Input Range DC/DC Con vert ers Electrical Specifications Key Features: 25W Output Power 4:1 Input Voltage Range Compact 1 x 1 Inch Case 1,500 VDC Isolation 12 Standard
Networking Computers and Peripherals Telecommunications
The 0RCY-60U12x is part of the isolated DC/DC converters that operate from a wide input range (18 VDC - 75 VDC) and can cover both 24 Vin and 48 Vin input range. These units will provide up to 84 W of
For more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
Volant NCF010 Series. Non-Isolated 10A SIP DC/DC Converters
Features: Small size, minimal footprint/low profile A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
500 ma DC-DC Step Down Converter P78G-Series
500 ma DC-DC Step Down Converter -Series Pin compatible to linear 78xx regulator (TO-220) Not isolated Efficiency up to 95 % Input voltage range up to 6 V Positive or negative output voltage possible Operating
VMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
YV09T60 60A DC-DC POL Converter 5V to 13.8V Input 0.6V to 1.98V Output Data Sheet
Member of the Family Applications Low voltage, high density systems with Intermediate Bus Architectures (IBA) Point-of-load regulators for high performance DSP, FPGA, ASIC, and microprocessors Desktops,
Ericsson Internal. General Information Safety Specification Absolute Maximum Ratings
E Ericsson Internal PRODUCT TLE OF CONTENTS SPECIFICATION Prepared (also subject responsible if other) EWEIXIE Approved PMP PMP 5000 303 VHULHV 5000 series PoL Regulators Regulator SEC/D (Julia series