TECHNICAL INFORMATION TRANSOZINC EPOXY PRIMER Primario Epóxico Orgánico de Zinc COMPONENT
|
|
- Angela Hunt
- 6 years ago
- Views:
Transcription
1 COMPONENT Component A Component B DESCRIPTION Zinc organic primer with galvanising USE Transozinc Epoxy Primer can be used as a high performance anticorrosive base coat on steel surfaces, as structures, machinery and tank walls. It's recommended for severe industrial environments and over permanently immersed surfaces. It can be covered with any finish. Structure Exterior/Interior Surface Product line Buried Pipes, Buried Structures, Exterior pipes, exterior tank walls, Interior Pipe Walls, Metallic Structures, Structural elements (column, trusses, etc.), Wastewater tanks Indoor, Outdoor, Roofed Exterior walls Steel Professional/industrial Line CHARACTERISTICS ASSESSMENT Finish Primer Excellent cathodic protection Matte PHYSICAL PROPERTY DATA
2 Volume Solids (%) 57 to 59% Weight per Gallon (kg/gl) 11,8 Weigth Solids of the mix (%) 86 to 88% Theoretical Yield (m²/gallon) 103 m² a 1 mil VOC (grams/liter) 365 Maximum Service Temperature ( C) 120 Pot life 12 h to 20 C Useful life in stock Comp. A: 12 months Comp. B: 12 months Recommended Dry Film Thickness 3 mils Definition of theoretical yield: Maximum surface that can be covered with a painting under ideal conditions. The practical performance varies depending on the type of surface used tool, applicator experience and other factors. 1 mil = mm. PRESENTATION AVAILABLE PRESENTATIONS, Metal container of 3,785 Liters = 1 Gallon AVAILABLE COLORS Gris , Metallic Container of Liters = 1/4 Gallon SURFACE PREPARATION CONDITION New steel Surfaces INSTRUCTION New steel or iron surfaces should be cleaned with Desoxidante- Desengrasante Sur #
3 Mechanical cleaning Abrasive blast Cleaning Use hand or power tools to clean surface up to a SSPC (Standard Steel Structures Painting Council) SP2 or SP3 Cleaning Standard. Clean with abrasive blast to get a SSPC (Standard Steel Structures Painting Council) SP5 o SP10 cleaning standard. PRODUCT PREPARATION COMPONENT MIXING RATIO MIXING INSTRUCTIONS Component A: - Component B: COMPONENTE B 4 partes Mix Component A and B as indicated, wait for the induction time and finally add the diluent.: 1 parte INDUCTION TIME : 20 minutes PRODUCT APPLICATION IT CAN BE APPLIED WITH Airless spray Brush Spray gun (gravity or suction feed)
4 Airless spray application Nozzle size. 0,43-0,50 mm Fan Angle Dry Coat Thickness Wet Film Thickness Line Pressure 3 mil 5,2 mil 180 BAR These are references values. It may be necessary to vary output pressure or nozzle size to get better results. Application conditions Surface Temperature 5 C - 35 C Room Temperature 10 C - 40 C Relative Humidity 10% - 85% Surface temperature should be at least 3 C (5 F) over dew point. Number of layers and thickness Apply the following layers of the intended paint system within the recommended repainting times. Drying times Dry-to-Touch Time Recoat time Curing Time (days) 1,5 h 4 h - 24 h 7 d Dry times are based in normal application, temperature, film thickness and dilution conditions and are provided to serve as a guide. If necessary to apply a second coat, or the next layer of the paint system, observe the recommended drying times.
5 OBSERVATIONS If you need more information, one of our technicians will assist you. Call 800-SUR-2000 or us at Keep container tightly closed in a ventilated place, between 20 and 30 C, out of reach of children. Container must be kept tightly closed to avoid loss of its properties. HEALTH The user of this product may need the appropriate Personal Protection Equipment (PPE), as described in its Safety data Sheet (MSDS), available at If you need to dispose of empty containers of our products in Costa Rica, contact your SUR Color paint store or our industrial compound in La Uruca, San Jose.
TECHNICAL INFORMATION CLEAR CONCENTRATED INDUSTRIAL VARNISH BARNIZ INDUSTRIAL CONCENTRADO TRANSPARENTE
DESCRIPTION is a single part, solvent-base wood finish, developed from alkyd resins. Fast Drying, beautiful shine and good leveling. USE Industrial and domestic use. Only for wood surfaces that will stay
More informationWEGPOXI WET SURFACE 89 PW ALUMINUM
WEGPOXI WET SURFACE 89 PW ALUMINUM PRODUCT DESCRIPTION INTENDED USES Bicomponent epoxy polyamine primer, of high solids, high thickness and with anticorrosive pigmentation with an aluminum base, providing
More informationPRODUCT GUIDE: CATALYZED TOPCOATS. Version:
PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane
More informationWEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504)
WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504) PRODUCT DESCRIPTION: INTENDED USES: Bicomponent gloss aliphatic acrylic polyurethane finishing paint, with excellent durability and extended repainting.
More informationSemimatte Volume Solids 55 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 4 hours 2 hours 1 hour Max. 7 2 hours 48 hours 36 hours
W-POXI HIDRO ERP 303 PRODUCT DESCRIPTION: INTENDED USES: Hydrosoluble bicomponent polyamine epoxy primer, with anticorrosive pigmentation and extra quick drying. Items which comply with Directive Rohs
More informationPRODUCT GUIDE: CATALYZED PRIMERS. Version:
PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and
More informationGloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours
W-POXI DFA 301 PRODUCT DESCRIPTION: INTENDED USES: Bicomponent polyamine epoxy paint, of high thickness, being part of the class of Low VOC, being able to be applied in internal environments, closed or
More informationSpecification Guide. Portable & Modular Buildings
Specification Guide Portable & Modular Buildings Table of Contents Page Introduction Identifying painting requirements 3 How do I use this specification guide 3 Contacting my local Axalta Coating Systems
More informationKnowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter.
Knowledge Requirements Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator trainthepainter.com Knowledge Requirements The Knowledge Requirements the protective coatings
More informationSUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY
SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY REV. DATE DESCRIPTION OF CHANGE AND REASON FOR CHANGE A JUNE 10, 1999 NEW ISSUE B JULY
More informationPRODUCT GUIDE: WATERBORNE TOPCOATS. Version:
PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible
More informationPRODUCT GUIDE: COMPLIANT TOPCOATS. Version:
PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing
More informationAquaCLAD Water-Reducible Rust Preventative Alkyd
AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High
More information10P20-44MNF High Solids Epoxy Primer
Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.
More informationCUPRON NEXT TECHNICAL DATA SHEET
Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.
More informationPhysical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.
Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (
More informationHP Chromate Free Epoxy Primer P /-4505/-4510
Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free
More informationHP Epoxy Primer P
Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy
More informationUse suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.
Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The
More informationGeneral description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More information1. Labels: Do not paint over UL, FMG, or other code-required labels or equipment name, identification, performance rating, or nomenclature plates.
SECTION 09 9100 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationProduct Data Sheet November 2016
Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationThese Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.
For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889
More informationFull Product Name. Products. Properties. 2K Etch Primer. Type of Product Description
Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion
More informationAerodur 3001 Base Coat Special Effects
Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001
More informationA Guide to the Application and Use of Organic and Inorganic Paints and Surface Coatings
A Guide to the Application and Use of Organic and Inorganic Paints and Surface Coatings Our recommended methods of appying both our organic and inorganic surface coatings. This guide will help to use our
More informationSpecification Guide. Conveyors
Specification Guide Conveyors Table of Contents Page Introduction Identifying painting requirements 3 How do I use this Specification Guide 3 Contacting my local Axalta Representative 3 Paint Selection
More informationData Sheet 5741 Englisch
Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl
More informationCITY OF TOMBALL. Section FIRE HYDRANTS 1.01 SECTION INCLUDES. A. Fire hydrants. B. Adjustment of fire hydrants and gate valves.
Section 02520 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Fire hydrants. B. Adjustment of fire hydrants and gate valves. 1.02 MEASUREMENT AND PAYMENT A. Unit Prices. 1. Payment is on a unit price basis
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationWATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS
WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS Björn Borup, Philipp Albert, Helmut Mack Evonik Industries, Germany Introduction Regulatory pressure and increasing
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationSouth African Qualification and Certification Committee (Corrosion Protection) SYLLABUS MODULE PS PAINTING SUPERVISORS COURSE
1/8 South African Qualification and Certification Committee (Corrosion Protection) APPENDIX SYLLABUS MODULE PAINTING COURSE DURATION: The planned duration is a minimum 5 day course and the theory and practical
More informationMetal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces
Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,
More informationProduct Data Sheet August 2006 (Updated in December 2014)
Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey
More informationA-LF-Sea. Application Manual for M&R. (Full blasting)
Application Manual for M&R (Full blasting) April 2015 1 Contents 1.Standard scheme 1)Standard scheme for flat & vertical bottom 2)Colour scheme for system 2.High pressure fresh water washing (HPFWW) 1)Timing
More informationPainting Procedure Aeroglaze Z306 Flat Black Absorptive Polyurethane
Painting Procedure Aeroglaze Z306 Flat Black Absorptive Polyurethane 1. Applicable Surfaces -- Generic aluminum or stainless steel surface works perfect. Remove grease and machining oil before use. 2.
More informationE380 and E381 Epoxy Primer
Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationA. Section includes surface preparation and the application of paint systems on exterior substrates.
SECTION 09 91 13 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationMarine. Paint Specification: November ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS
Marine ::Fiberglass Substrate:: PAINT that OUTLASTS & OUTPERFORMS ::Below the Water Line:: System 1 Fiberglass Substrate Pre Treatment Degreaser 10 Additional Requirements Keep surface wet for 5 to 10
More informationTechnical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY
4 3505-002 1 3505-105 0.5 3505-204 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish
More informationPainting Safety Procedure
Pars Oil & Gas Company Painting Safety Procedure HEALTH, SAFETY AND ENVIRONMENT PROCEDURE Painting Safety Procedure DOCUMENT ID - PR-66-POGC-002 REVISION 0.0 Pars Oil & Gas Company Pages 10 Revision 00
More informationSELECTION AND PREPARATION OF SUBSTRATES
592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationJanuary 2007 Product Information DELTRON D821
GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationTECHNICAL DATA SHEET IVY COATINGS:
direct to metal Interior/Exterior DESCRIPTION Ivy Direct To Metal Paint is a low-voc interior/exterior; waterborne; rust-inhibiting metal paint that does not compromise indoor air quality. Ivy Direct To
More informationTechnical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY
100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..
More informationPercoTop PUR 2K MS Topcoat
Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationThe required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.
Technical Data Sheet 402;2521 1 2521 zinc silicate VValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product.
More informationPercoTop 449 2K Structure Topcoat
Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop
More informationSpecification Guide. Construction Equipment
Specification Guide Construction Equipment Table of Contents Introduction Identifying painting requirements 3 How do I use this Specification Guide 3 Contacting my local Axalta Coating Systems Representative
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationVELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981
VELOX PLUS APPLICATION INSTRUCTIONS QUALITY MARINE EQUIPMENT SINCE 1981 VELOX PLUS TECHNICAL INFORMATION Please read all information and application instructions before beginning. Coverage Estimates Normal
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint
More informationEXTERIOR PAINTING
SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationGetting the Most Out of Airless Spray
P Getting the Most Out of Airless Spray aint application using airless equipment is, and has been for many years, the method of choice for large industrial painting projects. Although the industry is aware
More informationPaints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors
Paints for sheet-iron roofs For corrosion protection of metal surfaces outdoors 2 On roofs since 1964 Metallic roofing materials have been used for protecting the roofs of wooden houses since the 19th
More informationHigh-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.
Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 620;621 1,2 620 epoxy ^(ValidationDate) 1 Product description This is a two component, polyamide cured, high molecular weight epoxy coating. Specially designed
More informationEpoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.
Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationSuggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002
Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for
More informationmm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application
Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and
More informationIndustrial paints for metal surfaces. Product catalogue
Industrial paints for metal surfaces Product catalogue This catalogue provides a brief overview of the Tikkurila standard industrial product range for metal surfaces. Contents Solvent-borne alkyd paints
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 099123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 402;2522 1,2 2522 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high zinc dust
More informationApplication of Air & Water Barrier Using Sprayers and Power Rollers TDS 410M
Application of Air & Water Barrier Using Sprayers and Power Rollers TDS 410M Air & Water Barrier can be effectively sprayed or power rolled to increase productivity on large projects. In addition to the
More informationData Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description.
0 Enamel 2388 2K-Aqua Seidenmattlack 2388 Englisch water-based, two-component, highly resistant to mechanical and chemical stress, AgBB certified, for interior and exterior use, with 2K-Aqua Hardener 2380
More informationA. Section includes surface preparation and the application of paint systems on the following exterior substrates: 1. Steel and iron.
Farmington, Missouri Project Number M1801~01 PART 1 ~GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Application Guide Approved 2521;402 1,2 2521 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc
More informationMATERIAL AND EQUIPMENT STANDARD FOR VINYL PAINT (ALUMINUM) AS INTERMEDIATE AND TOP COAT (FINISH) ORIGINAL EDITION MAY 1993
MATERIAL AND EQUIPMENT STANDARD FOR VINYL PAINT (ALUMINUM) AS INTERMEDIATE AND TOP COAT (FINISH) ORIGINAL EDITION MAY 1993 This standard specification is reviewed and updated by the relevant technical
More informationINDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION
INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION Harrison Paint Company 1329 Harrison Avenue SW Canton, Ohio 44706 U.S.A. (800) 321-0680 Fax (330) 454-1750 PRIMERS 961 LINE SHOPCOAT PRIMER GRAY,
More information06/09/54. Theory of Rust
Theory of Rust 1 Type Of Corrosion Protections - Painting System Polyurethane Base, Epoxy Base, Oil Paint, Fluorine Base Type Of Corrosion Protections - Insulation System Fiberglass, Close cell PE 2 Type
More informationDesobond CA102 Adhesive Bonding Primer
TECHNICAL DATA SHEET Product Description Components Desobond is a low density adhesion promoter. It was developed to improve bonding characteristics to aged primers, topcoats, acrylics, aluminum, and other
More informationAPPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead Abatement
Sustainability Simplified. Very Simple. Award Winning Energy Saving and Asset Protection Coatings APPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead
More informationSECTION 025 INDUSTRIAL PAINTING
SECTION 025 INDUSTRIL PINTING Industrial painting, including all necessary preparation and application, except as modified in this Section, shall conform to the recommendations of the manufacturer of the
More informationSTANDARD SPECIFICATION FOR SHOP AND FIELD PAINTING
STANDARD SPECIFICATION FOR SHOP AND FIELD PAINTING SPECIFICATION FOR PAINTING PAGE: 1 of 10 STANDARD SPECIFICATION FOR SHOP AND FIELD PAINTING 1.0 GENERAL 1.1 These technical specifications shall be applicable
More informationMagnetpaint & Sketchpaint
Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More informationImpredur Silk Matt Enamel 880
Data Sheet Silk Matt Enamel 880 aromatics-free, premium quality, for exterior and interior use Field of Application Properties Material description Standard colors Gloss grade Base material For high-quality
More informationSECTION EXTERIOR PAINTING PART 1 - GENERAL
13414.01 EXTERIOR PAINTING 099113-1 SECTION 099113 - EXTERIOR PAINTING 1.1 SUMMARY PART 1 - GENERAL A. Section includes surface preparation and the application of paint systems on the following exterior
More informationorthwest Corrosion Engineering
January 27, 2015 N orthwest Corrosion Engineering Mr. William Davis, P.E. City of Bremerton 3027 Olympus Drive Bremerton, WA 98310 10995 Warfield Road, Sedro-Woolley, WA 98284 Phone: (360) 826-4570 Fax:
More informationPRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS
PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS ULTRIMAX 1 ULTRIMAX 1 ULTRIMAX 1 THE NUMBER 1 FOR SAVING YOU TIME AND EFFORT ULTRIMAX 1 COMPLIANT PRIMER, GLOSS AND VALUE IN ONE Ultrimax 1 is a high build acrylicbased
More information.3 Comply with the requirements of the Manitoba Occupational Health and Safety Act and Regulations for Construction Projects.
North End Water Pollution Control Centre Section 09 77 33 TANK LINING and Sludge Holding Tank No. 5 and 7 Page 1 of 5 Part 1 General 1.1 DESCRIPTION.1 Requirements for supply and installation of a lining
More informationUHS Duralit Extra Tinters series 150
2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum
More informationThe required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.
Technical Data Sheet 14880 1 14880 acrylic VValidationDate). 1 Product description This is a one component solvent based acrylic thin film intumescent coating. Independently approved for fire protection
More informationThe Application Guide offers product details and recommended practices for the use of the product.
Technical Data Sheet Approved 18820;18840;14100;14260 2 14100 epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy coating. It is a fast drying, abrasion resistant,
More informationOntario ENGINEERING STANDARD SPECIFICATION 1/14 REV. CIVIL MATERIAL PROTECTION PAINTS GENERAL REQUIREMENTS. Approved by.
1/1 Rev Description Revision by Approved by Issue Date YYYY/MM/DD 1 Document format and number changed. Previous number 901-01.01.611 AA 2011/12/31 AA 2011/12/31 2012/0/27 2 Approved for use in Thompson
More informationSEA45 Water Borne Acrylic Gloss
Water Borne Acrylic Gloss TECHNICAL DATA SHEET Product Description Components is a single pack, general purpose gloss finish. Applicable by brush or spray. Fast drying Water based, low VOC Excellent weather
More informationBEST PRACTICES REPORT. Parks & Recreation Dept. City of Sioux Falls, SD PROJECT OVERVIEW: Industrial Customer: City of Sioux Falls Parks & Recreation
NANO-CLEAR INDUSTRIAL COATING FOR WATER OXIDIZED FEATURE WATER PROTECTION FEATURE Parks & Recreation Dept. City of Sioux Falls, SD Industrial Customer: City of Sioux Falls Parks & Recreation Project: Fortify
More informationIRON MIOX Micaceous iron polish, anticorrosive for iron surfaces with no patchy finish
Converter name Destination Finish at high anticorrosie powerd given by the high micaceous iron oxyd. Suitable also in marine and iindustrial environment. Applicable on iron and steel surfaces as well as
More informationSurface Finishes. For woods metals and plastics
Surface Finishes For woods metals and plastics Reasons for Surface Finishes Some kind of surface finish is always necessary for the following reasons Resistance to decay (Stopping the material from rotting
More informationAPPLICATION HANDBOOK for INDUSTRIAL COATINGS
Sustainability Simplified. Very Simple. Award Winning Energy Saving and Asset Protection Coatings APPLICATION HANDBOOK for INDUSTRIAL COATINGS for Thermal Insulation & Corrosion Prevention Heat Shield
More informationA. Section includes surface preparation and the application of paint systems on the following exterior substrates: 1. Steel.
SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 SUMMARY A. Section includes surface preparation and the application of paint systems on the following exterior substrates: 1. Steel. B. Related Requirements:
More information