Magnet clamping. Messtechnik Spanntechnik Zerspanungstechnik
|
|
- Merilyn Cook
- 6 years ago
- Views:
Transcription
1 Magnet clamping 90 Messtechnik Spanntechnik Zerspanungstechnik
2 Introduction Magnet clamping technique Magnet clamping plates Control units Introduction Pole extensions Pole extensions 91
3 Electro-permanent Magnet clamping systems For the milling of medium and large work pieces, the square pole-magnet technology has proven worldwide as one of the best clamping techniques. Extremely short set-up times as well as a vibration- and interference-free clamping are only some reasons for its use in the fine mechanics area to the ship building industry. Vibration-free working and clamping of work pieces Fast and secure clamping of uneven parts Equal clamping force over the entire surface, without warping the work piece Five-side machining without crash risk Full use of the machine travel ways Minimal set-up times Fast and accurate plane-parallel milling Clamping of uneven welding constructions in no time Fast assembly of individual, magnetic clamping chucks Equal retention force in all directions due to square pole technique 92 Messtechnik Spanntechnik Zerspanungstechnik
4 QX Electro-permanent Magnet clamping technique block pol field The advanced QX technology comes up with many intelligent improvements, both mechanically and magnetically. Due to the use of connected block-pole-fields in the monolithic frame construction of the magnet clamping plate, the stiffness has been significantly increased compared to the old single-pole-technology - even with its small construction height. Also the epoxy-resin-interfaces have been reduced and the magnetic retention forces as well as the air gap behavior have been improved with the revolutionary block-field-technology. The threads in the soft magnet poles are provided with wear-resistant tool steel inserts. The QX magnet clamping technology is available for plates in different heights and for clamping blocks. Two different pole sizes can be selected. Depending on the expected work piece geometry two pole sizes, 50 x 50mm or 70 x 70mm, can be chosen. Thread bushings out of wear-resistant tooling steel M8 x 15mm deep Reduced epoxy resin areas Poles with the size of 50 x 50mm generate a magnetic field which enters 12mm into the work piece. That makes them a perfect choice for thinner and smaller work pieces. Another advantage is that especially smaller work pieces occupy more pole transitions which ensures a more evenly clamping process. Compared to the 70 x 70mm pole, a poorer air gap behavior and a higher set-up effort (more pole extensions) must be mentioned as a disadvantage. The nominal retention force is super strong with 160N/cm2 = 4 kn per pole. Pole with the size of 70 x 70mm generate a magnetic field which enters 18mm into the work piece. That makes them a perfect choice for larger work pieces. The excellent air gap behavior allows to clamp also uneven work pieces safely. On the 70 poles, pole extensions with a higher hub (height adjustment) can be used. The nominal retention force is super strong with 160N/cm2 = 7.8 kn per pole. Available heights, beginning at 51mm 93
5 QX-HE50 This is a super light magnet clamping plate with a height of 51mm and QX technology with 50 poles. The HE50 is designed for the tooling and machine building area. It is suitable for clamping small and thin-walled work pieces. Mounting slots on two sides and the ability to drill holes into the magnet clamping plate in many places supports a fast and flexible installation. QX-HE50 / Construction height 51mm Amount pols Control unit* MT QX 204 HE A, B MT QX 205 HE A, B MT QX 206 HE A, B MT QX 208 HE A, B MT QX 209 HE A, B MT QX 210 HE A, B MT QX 305 HE A, B MT QX 306 HE A, B MT QX 308 HE A, B MT QX 309 HE A, B MT QX 310 HE A, B MT QX 403 HE A, B MT QX 405 HE A, B MT QX 406 HE A, B MT QX 408 HE A, B MT QX 409 HE B MT QX 410 HE B MT QX 505 HE A, B MT QX 506 HE A, B MT QX 508 HE B MT QX 509 HE B MT QX 510 HE B MT QX 605 HE B MT QX 606 HE B MT QX 608 HE B MT QX 609 HE B 94 Messtechnik Spanntechnik Zerspanungstechnik
6 QX-Lock HD50 QX Lock HD50 magnet clamping plates are equipped with an extra strong frame construction. The construction height is 68mm and the plates can be back sided drilled until about 22mm deepness or milled for 12mm. This is perfect for installing reference elements for zero-point clamping systems. Transport thread around the plates allow an easy horizontal or vertical crane transport. QX-Lock HD50 / Construction height 68mm Amount pols Control unit* MT QX-Lock C MT QX-Lock C MT QX-Lock C MT QX-Lock C MT QX-Lock C MT QX-Lock C *The letters wich are pointed out on these sites for the correct control units can be compared on page 98. Control units for QX-Lock HD50 QX-Lock plates are developed electrical that way, that they can be operated with high modern ST-211 Control units as well as with almost all older control unit models. The proven FEME contact plug gives the oportunity to operate the QX Lock as a single plate, as a multiple clamping table or on an external set-up place with plug questioning. 95
7 QX-HD70 The magnet clamping plate QX-HD70 is a version with 70 x 70mm Poles for operation of predominantly large work pieces. Available in heights 51mm or 68mm. QX-HD70 plates are compatible with the world s best sold magnet clamping systems for heavy-duty machining. Mounting slots on two sides and the ability to drill holes into the magnet clamping plate in many places supports a fast and flexible installation. The magnet clamping plate version with a height of 68mm can be back sided drilled until about 22mm deepness. QX-HD70 / Construction height 51mm Amount pols Control unit* MT QX 406 HD B MT QX 408 HD B MT QX 410 HD B MT QX 506 HD B MT QX 508 HD B MT QX 510 HD B MT QX 606 HD B MT QX 608 HD B MT QX 610 HD B QX-HD70 / Construction height 68mm Amount pols Control unit* MT QX 406 HD C MT QX 408 HD C MT QX 410 HD C MT QX 506 HD C MT QX 508 HD C MT QX 510 HD C MT QX 606 HD C MT QX 608 HD C MT QX 610 HD C *The letters wich are pointed out on these sites for the correct control units can be compared on page Messtechnik Spanntechnik Zerspanungstechnik
8 QX-RD50 These round magnet clamping plates with QX square poles suite perfectly for machining centers with rotary tables, for turning and milling operations. The QX RD magnet clamping plates are available in heights of 51mm or 68mm. Standard vice they come with a sided plug-connection as well as with grinding contacts for the shaft passage. QX-RD50 / Construction height 51mm Dia. (mm) Amount pols Control unit* MT QX-500 RD A, B MT QX-600 RD A, B MT QX-800 RD B MT QX-1000 RD B MT QX-1200 RD B QX-Block HD70 The QX-Block is an active, two-sided and flexible magnet clamping block. Each side is provided with two/four 70mm QX poles, that means with a total of 15.6 / 31.2 kn of clamping force. It can be used to mount work pieces in a flexible way or to avoid vibrations as an additional clamping element especially for higher fixtures. The standard construction height of 100,2mm can be reduced by 6mm. Fixed and mobile standard pole extensions can be used on both sides of the clamping block. Heights between 94mm and 240mm can be realized. The QX block can be operated with a ST 211 Feme controller or almost any standard 400 V reserve control unit. Over a junction box, more QX blocks can be operated simultaneously. QX-Block HD70 / Construction height 100,2mm 2 magnetic active sites! Amount pols Control unit* MT QX-Block C MT QX-Block C 97
9 ST Control units ST Control units are produced at latest state-of-the-art. They are all short-circuit-proofed and equipped with a power management to control the complete magnetization. Optionally single plates or whole tables can be switched. The integration into the machine control center is easily possible. The item ST 211 Grind is equipped with an 8-stage-retention force regulation as well as with a special demagnetize cycle for the operation of grinding plates. Control unit ST 120 Connection voltage: 230V 50HZ 16A / Plug: Ergon Input: 2m+Schuko / Output: pipe Shortcut Height (mm) Cable length (m) A MT ST 120 ER Control unit ST 211 / 212 / 214 Connection voltage: 400V 50HZ 25A Plug ST 211 ER: Ergon Plug ST 211 FEME, ST 212 FEME: FEME 4pol Plug ST 214 FEME: FEME 7pol Input: 3m+32 A CEE / Output: pipe Shortcut Height (mm) Cable length (m) Technical details Output voltage Impuls Housing IP 44 / Protection class 1 100% ED, 0-40 C Release contact for machine security B MT ST 211 ER C MT ST 211 FEME D MT ST 212 FEME E MT ST 214 FEME Messtechnik Spanntechnik Zerspanungstechnik
10 P O L E E X T E N S I O N S 99
11 Pole extensions: mobile / fixed Fixed and mobile pole extensions on square-pole clamping systems allow the clamping of wavy and warped metal parts. They adapt to the workpiece and keep it safe. The individual points of contact between magnetic chuck and workpiece can be defined individually. Single points of contact between the magnet clamping plate and the work piece can be defined individually. As a result the drilling and machining of inner edges is possible on magnetically clamped work pieces. Additional pole extensions can be mounted quickly or interfering ones removed. Like that each work piece has its individual fixture in no time. For fa 5-side machining the work piece can be set free with the help of pole extensions. Complex structures for hard to clamp work pieces can be added into the magnetic active surface with pole plates. They protect the magnet clamping plate from wear and damage. Pole extensions are made out of high-quality steel and have best magnet fluency characteristics. They are technically perfect and long-lasting. Vibration-free operation and clamping of work pieces Protection for the magnet clamping plate Flexible in the mounting height Interfering contours free milling and drill through is possible No vacuum adhesion between magnet clamping plate and workpiece Easy removal of the work piece also with high-alloyed / hardened materials. tip-free three point support with 3 fixed pole extensions and mobile pole extensions for automatic adaptation on the work piece. 100 Messtechnik Spanntechnik Zerspanungstechnik
12 Pole extensions: mobile / fixed Mobile pole extensions are used to clamp work pieces on their complete surface area without warping them. Due to the power of the magnet field, the bouncing, embedded upper part of the mobile pole extensions puts itself on the work piece and stabilizes it by turning on the power, without pulling the workpiece down. Especially for operating extensive and large parts, the clamping on magnet clamping plates with mobile pole extensions has been proven. Quick parallel roughing of the 1. face Turning and roughing of the 2. face Turning and finishing of the 1. face 101
13 Fixed Pole extensions Fixed pole extensions are used to specify the three-point contact when used in combination with mobile pole extensions or to fix stiff and even materials in a high position. By using a full equipped magnet clamping plate with fixed pole extensions, the plate is protected from wear and defects. Pole extensions can be re-milled again and again, in case they are damaged. Fixed Pole extensions / round Dia. (mm) Height (mm) MT PVR 50 H ±0,01 MT PVR 50 H ±0,01 MT PVR 70 H ±0,01 MT PVR 70 H ±0,01 Fixed Ple extensions / square Height (mm) MT PVQ 50 H ±0,01 MT PVQ 50 H ±0,01 MT PVQ 50 H ±0,01 MT PVQ 70 H ±0,01 MT PVQ 70 H ±0,01 MT PVQ 70 H ±0, Messtechnik Spanntechnik Zerspanungstechnik
14 Mobile Pole extensions Mobile pole extensions with a square design are screwed down the the magnet clamping plate by using an Allen wrench. The surface is sandblasted and electrolytically plated. for Pol size Height (mm) MT MP 50 H (-3/+3) MT MP 70 H 45 70/ (-4,5/+5,5) RMP Pole extensions RMP pole extensions are simply screwed down to the magnet clamping plate by hand over a turned thread-stud (M8x10mm). The surface of the RMP pole extension is fully machined and chemically nickel plated. The magnetic performance is compared to square standard pole extensions higher by about 20%. The closed construction design prevents the penetration of dirt and chips. The round design generates an only vertical hub. The clamping surface is sandblasted to increase the friction of the RMP. for Pol size Dia. (mm) Height (mm) MT RMP 78 70/ (-5/+2,5) MT RMP (-2,5/+2,5) 103
15 innotool austria GmbH & CoKG Oberhub Altach Austria T F office@innotool-austria.com
The holding forces indicated in Chapter Magnetic clamping refer to a test work with 40x40x20mm and sanded surface of St37.
Magnetisches Heben Magnetic clamping MAGNETIC CLAMPING Magnetic clamping devices such as magnetic chucks, rotary chucks and blocks are used in all sectors of metalworking. When grinding, milling, eroding
More informationGRIPeffect. even more magnetic. Total uniformity of clamping, from the workpiece to the machine table
with P E R M A N E N T- E L E C T R O M A G N E T I C S Y S T E M S F O R M I L L I N G even more magnetic Total uniformity of clamping, from the workpiece Monolithic technology Full metallic surface Low
More informationMagnetic clamping. ST Control units
ST Control units The ST-Control units are on the cutting edge of technology. They are short-circuit proof and equipped with a power management, to control the full magnetization. It can be connected either
More informationGRIP. with more magnetic effect FUNCTION. with. Total uniformity and maximum rigidity of clamping
PERMANENT-ELECTRO MAGNETIC SYSTEMS FOR MILLING with more magnetic effect with GRIP FUNCTION Total uniformity and maximum rigidity of clamping Monolithic technology Full metallic surface Low thickness and
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationGRIP. with more magnetic effect. Total uniformity and maximum rigidity of clamping
GRIP PERMANENT-ELECTRO MAGNETIC SYSTEMS FOR MILLING with more magnetic effect Total uniformity and maximum rigidity of clamping Monolithic technology Full metallic surface Low thickness and lightweight
More informationTHE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS
THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS > Material: High quality tempering steel resp. castings. > Machining: All support blocks shown, have machined base- and contact faces. The serrated elements
More information14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA
4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationDemagnetizing. Clamping Chucks. Clamping Plates. Lifting Magnets. Holding Magnets. Demagnetizing. Units. Control Electronics. Non-Ferrous Separators
Wagner Magnete GmbH & Co. KG Obere Straße 15 D-87751 Heimertingen Phone: +49 (0) 8335 980-0 Fax: +49 (0) 8335 980-270 www.wagner-magnete.de e-mail: info@wagner-magnete.de Technology Full of Attraction
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationFlexibility and efficiency on high accuracy machining
Permanent-electro magnetic systems for turning and vertical grinding Flexibility and efficiency on high accuracy machining No piece distortion or deformation Uniform clamping: minimized vibrations Complete
More informationVice novelties Clamping technology for NC machining. driven by technology
Vice novelties Clamping technology for NC machining http://www.roehm.biz/schraubstockneuheiten driven by technology RKE NC-Compact vices The new NC-compact vice RKE: optimized design with proven quality.
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationModular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationPZS. Precision vices. Precision vices PZS
Simple clamping and releasing with the inner hexagon key. Type 735-60 PL-S micro with quick adjustment Item no. Size Squareness Parallelism Jaw G H J Work locator 1179514 1 0,005 0,002 34 25 15 75 20 20
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationSalter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationDrawbars for Milling Machines
Machine Tool & Drawbars for Milling Machines Made in USA Drawbars from low carbon steel, soft and black oxide plated. Drawbars are manufactured from two parts the shaft and the hex. Drawbars for Milling
More informationSPINDLE ADAPTER SELECTION GUIDE
CHUCK JAWS RETENTION KNOS SPINDLE ADAPTER SELECTION GUIDE DETERMINING SPINDLE TYPE & SIZE Type A1 and A2 s with A2 mounts can be installed on either A1 or A2 spindle nose. Camlock Type D1 Nose Type A1
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationPRODUCT: LOKI INSTALLATION INSTRUCTIONS. Product is covered by U.S. patents. For more information visit
R INSTALLATION INSTRUCTIONS PRODUCT: LOKI CONFIGURATION: SINGLE DOOR MOUNT: GLASS MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com . TOOLS + MATERIALS REQUIRED TOOLS
More informationChapter 27 Workholding Devices for Machine Tools. Workholding Devices INTRODUCTION. MET Manufacturing Processes.
MET 33800 Manufacturing Processes Chapter 27 Workholding Devices for Machine Tools Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Chapter 27-1 Workholding
More informationFeatures of TOOLFAST Clamping Devices and Clamping Elements
PART I CLAMPING DEVICES & CLAMPING ELEMENTS INTRODUCTION In the following pages of this part of catalogue, different types & sizes of clamping devices and clamping elements manufactured by us are illustrated.
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationThe jigs and fixtures are the economical ways to produce a component in mass production system. These are special work holding and tool guiding device
The jigs and fixtures are the economical ways to produce a component in mass production system. These are special work holding and tool guiding device Quality of the performance of a process largely influenced
More informationHOW TO WORK WITH HERMANN SCHMIDT
HOW TO WORK WITH HERMANN SCHMIDT Visit HSCHMIDT.COM Find in-depth product details and resources. View large library of configuration examples. Order products online: Pay by credit card. Terms customers
More informationC-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
More informationNailbiter Premium Ship Auger Bits. RESI-MASTER Heavy-Duty Ship Augers
Nailbiter Premium Ship Auger Bits Dual-Helix construction with twin cutting edges for faster and smoother drilling action, even through nail-embedded timbers Full body, dual induction heat treatment ensures
More informationDesign Optimization and Development of Portable Magnetic Clamping (MagCLAMP) Based on Machining Performances
International Journal of Engineering & Technology IJET-IJENS Vol:18 No:01 17 Design Optimization and Development of Portable Magnetic Clamping (MagCLAMP) Based on Machining Performances N. Ab Wahab, Muhamad
More informationIndexable insert tools
New products Workshop equipment II / 2016 Order now from our online shop! www.meusburger.com Indexable insert tools Profit from our perfectly coordinated range of tool carriers and indexable inserts for
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More information20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
More informationOther Types Of Bushes
Other Types Of Bushes Circuit board drill bushes: Designed to accommodate larger shank for making drill on circuit board Chip breaker bushes: Designed with chip breaking notch. Reduces friction and heat
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationPERCUSSION DRILL BITS
Universal drill bit GOLCRAFT 44 SS-plus MS5 universal drill bit GOLCRAFT 46 Tile/brick drill bit KERAMIK 47 Tile drill bit / KERAMIK diamond - dry drill 49 Glass drill bit 51 Glass drill bit KEILBIT 52
More informationChapter 23: Machining Processes: Turning and Hole Making
Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations
More informationULTIMATE ROUTER TABLE PLANS. By Dan Phalen
ULTIMATE ROUTER TABLE PLANS By Dan Phalen January 2017 Ultimate Router Table Plans. Copyright 2012-2017 by Daniel Phalen. Published by Creston Hall Publishing Company. All rights reserved. No part of this
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationDIVIDING EQUIPMENT DIVIDING EQUIPMENT
64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting
More informationPOWER TOOL ACCESSORIES
POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and
More informationT-Slot Clamps Rotagrip Ltd Tel Website
T-Slot Clamps 12150 Body: heat treated steel. Clamp: brass. Packed in pairs. For use in T-slots of machine tables. For replacement clamping screws see 12112. Hex. key not included. Order No. Slot size
More informationTOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
More informationTUR 6MN WITH LOADING CRANES. TUR 4MN 3000 x
TUR 4MN 3000 x 22 000 TUR 6MN WITH LOADING CRANES This lathe, produced for American client, has a unique bed configuration. It consists of two independent beds mounted on a special foundation. This solution
More informationWHAT? WHERE? HOW?
JIGS WHAT? WHERE? HOW? Introduction Mass production aims at high productivities to reduce unit cost and inter-changeabilites to facilitate easy assembly. Jigs are useful in mass production. They provide
More informationINSTRUCTIONS FOR HIT TEMPLATE FOR SCHLAGE AD MORTISE LOCK
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-280 TEMPLATE FOR SCHLAGE AD MORTISE LOCK WHEN USING POWER TOOLS ALWAYS
More informationWTL90120-M - CertiFlat PRO 1D Welding Table 900 x 1200 x 860mm (LxWxH) Tab & Slot U-Weld
WTL90120-M - CertiFlat PRO 1D Welding Table 900 x 1200 x 860mm (LxWxH) Tab & Slot U-Weld Ex GST Inc GST $860.00 $946.00 ORDER CODE: MODEL: Type: Leg Frame Type: Table Top Size (mm): Table Height with Stand
More informationWORKHOLDING DEVICES AND CLAMPING ELEMENTS
WORKHOLDING DEVICES AND ELEMENTS UNIVERSAL STRAP CLAMP For power presses, milling, drilling, shaping and boring. Supplied complete with T-Bolt, Nut etc. USC-(a) USC-(b) USC-(a) USC-(b) USC-(a) USC-(b)
More informationTHE RIGHT LIVE CENTRE FOR EVERY APPLICATION. For small and large centres For cramped work area For lower-lying centres For large boreholes
THE RIGHT LIVE CENTRE FOR EVERY For small and large centres For cramped work area For lower-lying centres For large boreholes 2006 LIVE CENTRES The requirement for high cutting capacities and high working
More informationHydraulic Chuck Reducer Sleeves
Hydraulic Chuck Reducer Sleeves with ERICKSON SAFE- OCK Smart Coolant Primary Application ERICKSON Safe-Lock Smart Coolant reducer sleeves are specially designed for high-precision and secure clamping
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationSALE SALE SALE palmgren.com chhanson.com SWIVEL BASES SPEED HANDLES
FRIENDS OF PALMGREN SPECIAL OFFERS WORKHOLDING S EVENT DUAL FORCE PRECISION MACHINE VISES Palmgren s Dual Force line of machine vises are all designed for precision part clamping and are ideal for use
More informationQIROX : The system for automated welding and cutting.
QIROX 217 QIROX : The system for automated welding and cutting. QIROX is the new CLOOS product brand comprising all solutions for automated welding and cutting. Due to its modular design, the QIROX system
More informationprecisely ground shoulder cutting edges make cylindrical, tear-free holes.
TC wood twist drill bit TURBOWOO 112 Wood twist drill bit 114 HSS wood twist drill bit 116 Wood twist drill bit KEILBIT 117 Auger bit lewis shape 118 Machine forstner drill bit 119 Flat bit KEILBIT 120
More informationWOOD DRILL BITS WOOD WORKING WITH PROFESSIONAL TOOLS HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
WOO RILL WOO WORKING WITH PROFESSIONAL TOOLS WOO RILL METAL RILL RILL 184 Wood twist drill bit TURBOWOO 119 120 180 280 Wood twist drill bit 121 122 186 HSS wood twist drill bit 123 187 Wood twist drill
More informationCLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More informationTechnical Data gripos ISO 9001
Technical ata gripos M-CERTIFICATE ISO 9001 NV N O. 7009 2 6 7 1 3 4 5 NC-uick Action Vices gripos The NC-uick action vices gripos were developed to provide the solution to practically every clamping problem
More informationInTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
More informationVario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationVWR LABORATORY BENCHES. Ergonomic, Flexible Lab System for Today s Modern Laboratories
VWR LABORATORY BENCHES Ergonomic, Flexible Lab System for Today s Modern Laboratories VWR LAB BENCHES VWR lab benches are ergonomically designed to meet the needs of laboratory personnel. There are many
More informationFixLogix CMM Fixture System Instructions
FixLogix CMM Fixture System Instructions FixLogix uses t-slot technology to provide simple fixture construction. Components are locked onto the plate or linear frames using FixLogix t-nuts. This design
More informationQUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
More informationOperating Manual Multi-Spot M22AL CD Stud Welding Machine
Operating Manual Multi-Spot M22AL CD Stud Welding Machine EL900016 January 2014 by Vehicle Service Group. All rights reserved. CO8904 Rev - 1/31/14 OPERATION MANUAL Read this manual carefully before using
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationLIVE CENTRES FACE DRIVERS
LIVE CENTRES FACE DRIVERS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationProfessional welding tables
Professional welding tables WELDING TABLES ACCESSORIES STOPS PRESSURERS/CLAMPS/GRIPS BOLTS weldingmaster We are the manufacturers of modular welding tables. Weldingmaster tables are highly innovative products,
More informationType A - Clamping force axially applied to the clamping edge. Extending and simultaneous lowering/clamping
Wedge clamp, double-acting, type A for dies with straight clamping edge Type A - Clamping force axially applied to the clamping edge Application: safe clamping of dies with straight clamping edge for clamping
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationINCREASE YOUR MACHINE UPTIME!
INCREASE YOUR MACHINE UPTIME! QUICK CHANGEOVER The right machine, processes, tooling and workholding reducing the in between time is a key factor! Jergens Ball Lock Mounting system is the original quick-change
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationMagnetic Accessories
Individual Work-relieving Economical Magnetic Accessories For individual application ASSFALG Magnetic accessories for work-relieve, increased safety with every day work for lifting, transporting and separating
More informationHANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT Introduction SECTION 1 Thank you for purchasing one of our fine True Focus products. This manual covers the
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More informationManufacturing Process
Unit 10: Manufacturing Process Unit code: H/601/1487 QCF level: 4 Credit value: 15 Aim This unit will develop learners knowledge of manufacturing processes and techniques that can be applied to a range
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationw w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models
-J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More information