U U W PACKAGE I FOR ATIO. RH1498M 10MHz, 6V/µs, Dual Rail-to-Rail Input and Output Precision C-Load Op Amp DESCRIPTIO BUR -I CIRCUIT
|
|
- Jared Willis
- 6 years ago
- Views:
Transcription
1 RH498M MHz, 6V/µs, Dual Rail-to-Rail Input and Output Precision C-Load Op Amp DESCRIPTIO U The RH498 is a dual, rail-to-rail input and output precision C-Load TM op amp with a MHz gain-bandwidth product and a 6V/µs slew rate. The RH498 is designed to maximize input dynamic range by delivering precision performance over the full supply voltage. Using a patented technique, the input stages of the RH498 are trimmed, one at the negative supply and the other at the positive supply. The resulting guaranteed common mode rejection is much better than other rail-torail input op amps. When used as a unity-gain buffer in front of single supply 2-bit A-to-D converters, the RH498 is guaranteed to add less than LSB of error even in single 3V supply systems. With db of supply rejection, the RH498 maintains its performance over a supply range of 2.2V to 36V. The inputs can be driven beyond the supplies without damage or phase reversal of the output. These op amps remain stable while driving capacitive loads up to,pf. The wafer lots are processed to Linear Technology's inhouse Class S flow to yield circuits usable in stringent military and space applications., LTC and LT are registered trademarks of Linear Technology Corporation. C-Load is a trademark of Linear Technology Corporation. ABSOLUTE AXI U RATI GS W W W (Note ) Total Supply Voltage (V + to V )... 36V Input Current... ±ma Output Short-Circuit Duration (Note 2)... Continuous Operating Temperature Range C to 25 C Specified Temperature Range C to 25 C Junction Temperature... 5 C Storage Temperature Range C to 5 C Lead Temperature (Soldering, sec)... 3 C U BUR -I CIRCUIT U U U U W PACKAGE I FOR ATIO 5k Ω 5k 6V RH498M 6V RH498M BI OUT A IN A +IN A NC V TOP VIEW W PACKAGE -LEAD FLATPAK V + OUT B IN B +IN B NC
2 RH498M TABLE : ELECTRICAL CHARACTERISTICS (Pre-Irradiation) V S = ±5V, V CM = V OUT = V, unless otherwise noted. T A = 25 C SUB- 55 C T A 25 C SUB- SYMBOL PARAMETER CONDITIONS NOTES MIN TYP MAX GROUP MIN TYP MAX GROUP UNITS V OS Input Offset Voltage V CM = V +, V 2 8 µv V CM = 4.5V, 4.5V 35 2, 3 µv Input Offset Voltage Match V CM = V + to V µv (Channel-to-Channel) V CM = 4.5V to 4.5V 45 8 µv I B Input Bias Current V CM = V na V CM = 4.5V 5 2 2, 3 na V CM = V na V CM = 4.5V 2 5 na Input Bias Current Match V CM = V +, V na (Channel-to-Channel) V CM = 4.5V, 4.5V 5 4 na I OS Input Offset Current V CM = V +, V 6 7 na V CM = 4.5V, 4.5V 4 3 2, 3 na Input Voltage Range V Input Noise Voltage.Hz to Hz 4 nv P-P e n Input Noise Voltage Density f = khz 2 nv/ Hz i n Input Noise Current Density f = khz.3 pa/ Hz A VOL Large-Signal Voltage Gain V O = 4.5V to 4.5V, , 6 V/mV R = k V O = V to V, R = 2k V/mV CMRR Common Mode Rejection V CM = V + to V 9 2 2, 3 db Ratio V CM = 4.5V to 4.5V 86 2 db CMRR Match V CM = V + to V db (Channel-to-Channel) V CM = 4.5V to 4.5V 8 db PSRR Power Supply Rejection V S = ±2V to ±6V , 3 db Ratio PSRR Match V S = ±2V to ±6V db (Channel-to-Channel) V OL Output Voltage Swing No Load mv (Low) (Note 4) I SINK = ma , 6 mv I SINK = ma 23 5 mv I SINK = 5mA 8 5 mv V OH Output Voltage Swing No Load mv (High) (Note 4) I SINK = ma , 6 mv I SINK = ma 42 8 mv I SINK = 5mA 3 8 mv I SC Short-Circuit Current ±5 ±3 ±7.5 ±2 2, 3 ma I S Supply Current per Amp , 3 ma GBW Gain-Bandwidth Product f = khz MHz SR Slew Rate A V =, R L = 2k, , 6 V/µs V O = ±V, Measure at V O = ±5V 2
3 TABLE A: ELECTRICAL CHARACTERISTICS (Post-Irradiation) V S = ±5V, V CM = V, T A = 25 C, unless otherwise noted RH498M Krad(Si) 2Krad(Si) 5Krad(Si) Krad(Si) 2Krad(Si) SYMBOL PARAMETER CONDITIONS NOTES MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX UNITS V OS Input Offset Voltage V CM = V +, V µv I B Input Bias Current V CM = V +, V na I OS Input Offset Current V CM = V +, V na Input Voltage Range V V + V V + V V + V V + V V + V A VOL Large-Signal Voltage V O = 4.5V to 4.5V, V/mV Gain R = k V O = V to V, V/mV R = 2k CMRR Common Mode V CM = V + to V db Rejection Ratio CMRR Match V CM = V + to V db (Channel-to-Channel) PSRR Power Supply V S = ±2V to ±6V db Rejection Ratio PSRR Match V S = ±2V to ±6V db (Channel-to-Channel) V OUT Output Voltage No Load mv Swing Low I SINK = ma 4 mv I SINK = ma mv Output Voltage No Load mv Swing High I SINK = ma mv I SINK = ma mv I SC Short-Circuit Current ± ± ± ± ± ma I S Supply Current ma GBW Gain-Bandwidth f = khz MHz Product SR Slew Rate A V =, R L = k, V/µs V O = ±V, Measure at V O = ±5V 3
4 RH498M TABLE 2: ELECTRICAL CHARACTERISTICS (Pre-Irradiation) V S = 3V, 5V; V CM = V OUT = half supply, unless otherwise noted. T A = 25 C SUB- 55 C T A 25 C SUB- SYMBOL PARAMETER CONDITIONS NOTES MIN TYP MAX GROUP MIN TYP MAX GROUP UNITS V OS Input Offset Voltage V CM = V +, V 5 8 µv V CM = V +.5V, V +.5V 3 2, 3 µv Input Offset Voltage Match V CM = V + to V µv (Channel-to-Channel) V CM = V +.5V, V +.5V 35 8 µv I B Input Bias Current V CM = V na V CM = V +.5V 45 2, 3 na V CM = V na V CM = V +.5V 45 na Input Bias Current Match V CM = V +, V na (Channel-to-Channel) V CM = V +.5V, V +.5V na I OS Input Offset Current V CM = V +, V 5 65 na V CM = V +.5V, V +.5V 5 3 2, 3 na Input Voltage Range V V + V +.5V V +.5V V Input Noise Voltage.Hz to Hz 4 nv P-P e n Input Noise Voltage Density f = khz 2 nv/ Hz i n Input Noise Current Density f = khz.3 pa/ Hz C IN Input Capacitance 5 pf A VOL Large-Signal Voltage Gain V S = 5V, V O = 75mV to 4.8V, , 6 V/mV R L = k V S = 3V, V O = 75mV to 2.8V, V/mV R L = k CMRR Common Mode Rejection V S = 5V, V CM = V + to V 76 9 db Ratio V S = 3V, V CM = V + to V , 3 db V S = 5V, V CM =.5V to 4.5V db V S = 3V, V CM =.5V to 2.5V db CMRR Match V S = 5V, V CM = V + to V 75 9 db (Channel-to-Channel) V S = 3V, V CM = V + to V , 3 db V S = 5V, V CM =.5V to 4.5V 66 db V S = 3V, V CM =.5V to 2.5V db PSRR Power Supply Rejection V S = 2.2V to 2V, , 3 db Ratio V CM = V O =.5V PSRR Match V S = 2.2V to 2V, db (Channel-to-Channel) V CM = V O =.5V V OL Output Voltage Swing No Load mv (Low) (Note 4) I SINK = ma , 6 mv I SINK = 2.5mA mv V OH Output Voltage Swing No Load mv (High) (Note 4) I SINK = ma , 6 mv I SINK = 2.5mA mv I SC Short-Circuit Current V S = 5V ± ±5 ± 2, 3 ma V S = 3V ±2. 9 ±5 ±9.5 ma I S Supply Current per Amp , 3 ma 4
5 TABLE 2: ELECTRICAL CHARACTERISTICS (Pre-Irradiation) V S = 3V, 5V; V CM = V OUT = half supply, unless otherwise noted. RH498M T A = 25 C SUB- 55 C T A 25 C SUB- SYMBOL PARAMETER CONDITIONS NOTES MIN TYP MAX GROUP MIN TYP MAX GROUP UNITS GBW Gain-Bandwidth Product V S = 5V, f = khz MHz SR Slew Rate V S = ±2.5V, A V =, , 6 V/µs R L = 2k,V O = ±2V, Measure at V O = ±V TABLE 2A: ELECTRICAL CHARACTERISTICS (Post-Irradiation) V S = 5V, 3V; V CM = half supply, T A = 25 C, unless otherwise noted Krad(Si) 2Krad(Si) 5Krad(Si) Krad(Si) 2Krad(Si) SYMBOL PARAMETER CONDITIONS NOTES MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX UNITS V OS Input Offset Voltage V CM = V +, V µv I B Input Bias Current V CM = V +, V na I OS Input Offset Current V CM = V +, V na Input Voltage Range V V + V V + V V + V V + V V + V A VOL Large-Signal Voltage V O = 75mV to V +.2V V/mV Gain R= k CMRR Common Mode V CM = V + to V db Rejection Ratio CMRR Match V CM = V + to V db (Channel-to-Channel) PSRR Power Supply V S = 2.2V to 2V, db Rejection Ratio V CM = V O =.5V PSRR Match V S = 2.2V to 2V, db (Channel-to-Channel) V CM = V O =.5V V OUT Output Voltage No Load mv Swing Low I SINK = ma 4 mv I SINK = 2.5mA mv Output Voltage No Load mv Swing High I SINK = ma mv I SINK = 2.5mA mv I SC Short-Circuit Current ±8 ±8 ±8 ±8 ±8 ma I S Supply Current ma SR Slew Rate V S = ±2.5V,A V =, V/µs R L = k, V O = ±2V, Measure at V O = ±V Note : Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: A heat sink may be required to keep the junction temperature below this absolute maximum rating when the output is shorted indefinitely. Note 3: Matching parameters are the difference between amplifiers A and B. Note 4: Output voltage swings are measured between the output and power supply rails. 5
6 RH498M TABLE 2: ELECTRICAL TEST REQUIRE E TS MIL-STD-883 TEST REQUIREMENTS SUBGROUP Final Electrical Test Requirements (Method 54) *,2,3,4,5,6 Group A Test Requirements (Method 55),2,3,4,5,6 Group B and D for Class S, and,2,3 End Point Electrical Parameters (Method 55) * PDA applies to subgroup. See PDA Test Notes. U W PDA Test Notes The PDA is specified as 5% based on failures from group A, subgroup, tests after cooldown as the final electrical test in accordance with method 54 of MIL-STD-883. The verified failures of group A, subgroup, after burn-in divided by the total number of devices submitted for burn-in in that lot shall be used to determine the percent for the lot. Linear Technology Corporation reserves the right to test to tighter limits than those given. TOTAL DOSE BIAS CIRCUIT 5k 4pF 5V 8V 5k + 5V RH498 TC 6
7 RH498M TYPICAL PERFOR A U W CE CHARACTERISTICS A VOL (V/mV) Large Signal Voltage Gain R L = k V S = ±5V V O = ±4.5V V S = 5V V O = 75mV TO 4.8V A VOL (V/mV) Large Signal Voltage Gain V S = ±5V V O = ±V R L = 2k SLEW RATE (V/µs) Slew Rate V S = ±5V V O = ±V R L = k 2 2 V S = 3V V O = 75mV TO 2.8V RH498 G RH498 G2 RH498 G3 Supply Current per Amp Input Offset Voltage Input Offset Current 4 V S = ±5, 5V, 3V 8 6 V S = ±5V, 5V, 3V V CM = V 8 6 V S = ±5V, 5V, 3V V CM = V I S (ma) 2 VOS (µv) 2 2 IOS (na) RH498 G4 8 RH498 G5 8 RH498 G6 Input Bias Current Common Mode Rejection Ratio Power Supply Rejection Ratio V S = ±5V, 5V, 3V V CM = V 3 2 V V CM V + 6 ±2V V S ±6V V CM = V 2 4 I B (na) 4 CMRR (db) 9 8 V S = ±5V V S = 5V V S = 3V PSRR (db) RH498 G7 RH498 G8 RH498 G9 7
8 RH498M TYPICAL PERFOR SUPPLY CURRENT PER AMPLIFIER (ma) A U W CE CHARACTERISTICS Supply Current vs Supply Voltage Supply Current vs Temperature 2. T A = 25 C T A = 25 C.5 T A = 55 C..5 SUPPLY CURRENT PER AMPLIFIER (ma) 2. V S = ±5V V S = 5V, V.5..5 INPUT BIAS CURRENT (na) Input Bias Current vs Common Mode Voltage V S = 5V, V T A = 25 C T A = 25 C T A = 55 C TOTAL SUPPLY VOLTAGE (V) TEMPERATURE ( C) COMMON MODE VOLTAGE (V) RH498 G RH498 G RH498 G2 OPEN LOOP VOLTAGE GAIN (V/mV) Open-Loop Voltage Gain vs Temperature R L = 2k V S = ±5V TEMPERATURE ( C) Output Saturation Voltage vs Load Current (Output High) RH498 G3 INPUT BIAS CURRENT (na) Input Bias Current vs Temperature NPN ACTIVE PNP ACTIVE TEMPERATURE ( C) V S = ±5V V CM = 5V V S = 5V, V V CM = 5V V S = ±5V V CM = 5V V S = 5V, V V CM = V Output Saturation Voltage vs Load Current (Output Low) RH498 G4 8 SATURATION VOLTAGE (mv) T A = 55 C T A = 25 C T A = 25 C... LOAD CURRENT (ma) RH498 G5... LOAD CURRENT (ma) LT/LT 83 REV A PRINTED IN USA Linear Technology Corporation 63 McCarthy Blvd., Milpitas, CA (48) FAX: (48) LINEAR TECHNOLOGY CORPORATION 23 SATURATION VOLTAGE (mv) T A = 25 C T A = 25 C T A = 55 C RH498 G6 ID No
RH1014M Quad Precision Operational Amplifier DESCRIPTIO PACKAGE INFORMATION BURN-IN CIRCUIT
RH4M Quad Precision Operational Amplifier DESCRIPTIO U The RH4M is the first precision quad operational amplifier which directly upgrades designs in the industry standard 8-pin DIP LM4/LM48/OP-/556 pin
More informationRH1078M Micropower, Dual, Single Supply Precision Op Amp ABSOLUTE MAXIMUM RATINGS DESCRIPTION PACKAGE/ORDER INFORMATION
RH7M Micropower, Dual, Single Supply Precision Op Amp DESCRIPTION The RH7M is a micropower dual op amp in the standard -pin configuration. This device is optimized for single supply operation at 5. Specifications
More informationFEATURES APPLICATIONS TYPICAL APPLICATION LT1466L/LT1467L Micropower Dual/Quad Precision Rail-to-Rail Input and Output Op Amps
Micropower Dual/Quad Precision Rail-to-Rail Input and Output Op Amps FEATRES Rail-to-Rail Input and Output Low Supply Current: 75µA Max 39µV V OS(MAX) for V CM = V to V + High Common Mode Rejection Ratio:
More informationRH1016M UltraFast Precision 10ns Comparator ABSOLUTE MAXIMUM RATINGS DESCRIPTION BURN-IN CIRCUIT PACKAGE INFORMATION
DESCRIPTION The RH is an UltraFast TM ns comparator that interfaces directly to TTL/CMOS logic while operating from either ±V or single V supplies. Tight offset voltage specifi ca tions and high gain allow
More informationDESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION. LT1498/LT MHz, 6V/µs, Dual/Quad Rail-to-Rail Input and Output Precision C-Load Op Amps
MHz, 6V/µs, Dual/Quad Rail-to-Rail Input and Output Precision C-Load Op Amps FEATRES Rail-to-Rail Input and Output 475µV Max V OS from V + to V Gain-Bandwidth Product: MHz Slew Rate: 6V/µs Low Supply Current
More informationDESCRIPTIO TYPICAL APPLICATIO. LT1803/LT1804/LT1805 Single/Dual/Quad 100V/µs, 85MHz, Rail-to-Rail Input and Output Op Amps FEATURES APPLICATIO S
FEATURES Slew Rate: V/µs Gain Bandwidth Product: 8MHz Input Common Mode Range Includes Both Rails Output Swings Rail-to-Rail Low Quiescent Current: 3mA Max per Amplifier Large Output Current: 42mA Voltage
More informationDESCRIPTIO. LT1413 Single Supply, Dual Precision Op Amp
Single Supply, Dual Precision Op Amp FEATRES Single Supply Operation: Input Goes Below Ground Output Swings to Ground Sinking Current No Pull-Down Resistors Needed Phase Reversal Protection At V, V Low
More informationMicropower Precision CMOS Operational Amplifier AD8500
Micropower Precision CMOS Operational Amplifier AD85 FEATURES Supply current: μa maximum Offset voltage: mv maximum Single-supply or dual-supply operation Rail-to-rail input and output No phase reversal
More informationFEATURES DESCRIPTIO APPLICATIO S. LT1636 Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp TYPICAL APPLICATIO
Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp FEATRES Rail-to-Rail Input and Output Micropower: 5µA I Q, 44V Supply MSOP Package Over-The-Top TM : Input Common Mode Range Extends 44V Above
More informationFEATURES TYPICAL APPLICATIO. LT µA, 14nV/ Hz, Rail-to-Rail Output Precision Op Amp with Shutdown DESCRIPTIO APPLICATIO S
FEATURES 3µV Maximum Offset Voltage pa Maximum Input Bias Current 3µA Supply Current Rail-to-Rail Output Swing µa Supply Current in Shutdown db Minimum Voltage Gain (V S = ±V).µV/ C Maximum V OS Drift
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More informationPrecision Micropower Single Supply Operational Amplifier OP777
a FEATURES Low Offset Voltage: 1 V Max Low Input Bias Current: 1 na Max Single-Supply Operation: 2.7 V to 3 V Dual-Supply Operation: 1.35 V to 15 V Low Supply Current: 27 A/Amp Unity Gain Stable No Phase
More information15 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP
5 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +25 C) Controlled manufacturing baseline
More informationFEATURES TYPICAL APPLICATIO. LT1635 Micropower Rail-to-Rail Op Amp and Reference DESCRIPTIO APPLICATIO S
LT5 Micropower Rail-to-Rail Op Amp and Reference FEATRES Guaranteed Operation at.v Op Amp and Reference on Single Chip Micropower: µa Supply Current Industrial Temperature Range SO- Packages Rail-to-Rail
More informationDESCRIPTIO FEATURES TYPICAL APPLICATIO. LT1469 Dual 90MHz, 22V/µs 16-Bit Accurate Operational Amplifier APPLICATIO S
FEATURES 9MHz Gain Bandwidth, f = khz Maximum Input Offset Voltage: 5µV Settling Time: 9ns (A V =, 5µV, V Step) V/µs Slew Rate Low Distortion: 96.5dB for khz, V P-P Maximum Input Offset Voltage Drift:
More informationLow Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643
Data Sheet Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD864/AD8642/AD8643 FEATURES Low supply current: 25 μa max Very low input bias current: pa max Low offset voltage: 75 μv max Single-supply
More informationFEATURES DESCRIPTIO Low Noise Voltage: 0.95nV/ Hz (100kHz) Gain Bandwidth Product: LT6200/LT MHz AV = 1 LT MHz LT
LT62/LT62- LT62-1/LT621 16MHz, Rail-to-Rail Input and Output,.9nV/ Hz Low Noise, Op Amp Family FEATURES Low Noise Voltage:.9nV/ Hz (1kHz) Gain Bandwidth Product: LT62/LT621 16MHz A V = 1 LT62-8MHz A V
More informationLow-Power Quad Operational Amplifier FEATURES: DESCRIPTION: Memory. Logic Diagram. RAD-PAK technology-hardened against natural space radiation
Low-Power Quad Operational Amplifier FEATURES: RAD-PAK technology-hardened against natural space radiation Total dose hardness: - > 100 krad (Si), depending upon space mission Excellent Single Event Effects:
More informationOP400A. Quad Low-Offset, Low-Power Operational Amplifier FEATURES: DESCRIPTION: Memory. Logic Diagram (One Amplifier)
Quad Low-Offset, Low-Power Operational Amplifier v+ BIAS OUT VOLTAGE LIMITING NETWORK +IN -IN v- Logic Diagram (One Amplifier) FEATURES: RAD-PAK technology-hardened against natural space radiation Total
More informationTYPICAL APPLICATIO. LT MHz, 250V/µs, A V 4 Operational Amplifier DESCRIPTIO FEATURES APPLICATIO S
5MHz, 5V/µs, A V Operational Amplifier FEATRES Gain-Bandwidth: 5MHz Gain of Stable Slew Rate: 5V/µs Input Noise Voltage: nv/ Hz C-Load TM Op Amp Drives Capacitive Loads Maximum Input Offset Voltage: µv
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationAD864/AD8642/AD8643 TABLE OF CONTENTS Specifications... 3 Electrical Characteristics... 3 Absolute Maximum Ratings... 5 ESD Caution... 5 Typical Perfo
FEATURES Low supply current: 25 µa max Very low input bias current: pa max Low offset voltage: 75 µv max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output Unity-gain
More information150 μv Maximum Offset Voltage Op Amp OP07D
5 μv Maximum Offset Voltage Op Amp OP7D FEATURES Low offset voltage: 5 µv max Input offset drift:.5 µv/ C max Low noise:.25 μv p-p High gain CMRR and PSRR: 5 db min Low supply current:. ma Wide supply
More informationUNISONIC TECHNOLOGIES CO., LTD LM321
UNISONIC TECHNOLOGIES CO., LTD LM321 LOW POWER SINGLE OP AMP DESCRIPTION The UTC LM321 s quiescent current is only 430µA (5V). The UTC LM321 brings performance and economy to low power systems, With a
More informationMC34085BP HIGH PERFORMANCE JFET INPUT OPERATIONAL AMPLIFIERS
These devices are a new generation of high speed JFET input monolithic operational amplifiers. Innovative design concepts along with JFET technology provide wide gain bandwidth product and high slew rate.
More informationFeatures. Applications
Teeny Ultra-Low Power Op Amp General Description The is a rail-to-rail output, operational amplifier in Teeny SC70 packaging. The provides 4MHz gain-bandwidth product while consuming an incredibly low
More informationRH3083MK DICE/DWF Adjustable 2.8A Single Resistor Low Dropout Regulator
RH383MK DICE/DWF Adjustable.8A Single Resistor Low Dropout Regulator Features n Outputs May Be Paralleled for Higher Current and Heat Spreading n Single Resistor Sets Output oltage n Output Adjustable
More informationUltraprecision, 36 V, 2.8 nv/ Hz Dual Rail-to-Rail Output Op Amp AD8676
FEATURES Very low voltage noise 2.8 nv/ Hz @ khz Rail-to-rail output swing Low input bias current: 2 na maximum Very low offset voltage: 2 μv typical Low input offset drift:.6 μv/ C maximum Very high gain:
More informationFEATURES TYPICAL APPLICATIO. LT1194 Video Difference Amplifier DESCRIPTIO APPLICATIO S
FEATURES Differential or Single-Ended Gain Block: ± (db) db Bandwidth: MHz Slew Rate: /µs Low Cost Output Current: ±ma Settling Time: ns to.% CMRR at MHz: db Differential Gain Error:.% Differential Phase
More informationSGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier
PRODUCT DESCRIPTION The SGM8551XN is a single rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to
More informationDESCRIPTION FEATURES. LT1490/LT1491 Dual and Quad Micropower Rail-to-Rail Input and Output Op Amps APPLICATIONS TYPICAL APPLICATION
FEATRES Rail-to-Rail Input and Output Single Supply Input Range:.4V to 44V Micropower: µa/amplifier Max Specified on 3V, 5V and ±5V Supplies High Output Current: ma Output Drives,pF with Output Compensation
More informationDual Precision, Low Cost, High Speed BiFET Op Amp AD712-EP
Dual Precision, Low Cost, High Speed BiFET Op Amp FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +125 C) Controlled manufacturing baseline One
More informationHigh-Precision, Low-Voltage, Micropower Op Amp MAX480. General Description. Features. Ordering Information. Applications.
9-77; Rev a; /98 High-Precision, Low-oltage, General Description The is a precision micropower operational amplifier with flexible power-supply capability. Its guaranteed µ maximum offset voltage (5µ typ)
More informationSON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS
PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the
More informationLow Power, Precision, Auto-Zero Op Amps AD8538/AD8539 FEATURES Low offset voltage: 13 μv maximum Input offset drift: 0.03 μv/ C Single-supply operatio
Low Power, Precision, Auto-Zero Op Amps FEATURES Low offset voltage: 3 μv maximum Input offset drift:.3 μv/ C Single-supply operation: 2.7 V to 5.5 V High gain, CMRR, and PSRR Low input bias current: 25
More informationLT6230/LT / LT6231/LT MHz, Rail-to-Rail Output, 1.1nV/ Hz, 3.5mA Op Amp Family DESCRIPTIO FEATURES APPLICATIO S TYPICAL APPLICATIO
FEATURES Low Noise Voltage:.nV/ Hz Low Supply Current: 3.mA/Amp Max Low Offset Voltage: 3µV Max Gain Bandwidth Product: LT623: 2MHz; A V LT623-: 4MHz; A V Wide Supply Range: 3V to 2.6V Output Swings Rail-to-Rail
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationHigh Common-Mode Rejection. Differential Line Receiver SSM2141 REV. B FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 100 db typ 60 Hz: 100 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.001% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
More informationQuad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
More informationLM321 Low Power Single Op Amp
Low Power Single Op Amp General Description The LM321 brings performance and economy to low power systems. With a high unity gain frequency and a guaranteed 0.4V/µs slew rate, the quiescent current is
More informationInternally-compensated dual low noise operational amplifier NE/SE5532/5532A
Internally-compensated dual low noise operational DESCRIPTION The 5532 is a dual high-performance low noise operational. Compared to most of the standard operational s, such as the 1458, it shows better
More informationDual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482
Dual/Quad Low Power, High Speed JFET Operational Amplifiers OP22/OP42 FEATURES High slew rate: 9 V/µs Wide bandwidth: 4 MHz Low supply current: 2 µa/amplifier max Low offset voltage: 3 mv max Low bias
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More information16 V, 4 MHz RR0 Amplifiers AD8665/AD8666/AD8668
6 V, MHz RR Amplifiers AD8665/AD8666/AD8668 FEATURES Offset voltage:.5 mv max Low input bias current: pa max Single-supply operation: 5 V to 6 V Dual-supply operation: ±.5 V to ±8 V Low noise: 8 nv/ Hz
More informationRail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationDual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482
Dual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482 FEATURES High slew rate: 9 V/μs Wide bandwidth: 4 MHz Low supply current: 2 μa/amplifier maximum Low offset voltage: 3 mv maximum
More informationDual Low Offset, Low Power Operational Amplifier OP200
Dual Low Offset, Low Power Operational Amplifier OP200 FEATURES Low input offset voltage: 75 μv maximum Low offset voltage drift, over 55 C < TA < +25 C 0.5 μv/ C maximum Low supply current (per amplifier):
More informationQuad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V max Offset Voltage V/ C max Offset Voltage Drift 5 pa max Input Bias Current.2 pa/ C typical I B Drift Low Noise.5 V p-p typical Noise,. Hz to Hz Low Power 6 A max Supply
More informationRC4741 General Purpose Operation Amplifier
General Purpose Operation Amplifier www.fairchildsemi.com Features Unity gain bandwidth 3. MHz High slew rate 1.6 V/mS Low noise voltage 9 nv/öhz Input offset voltage. mv Input bias current 6 na Indefinite
More informationDESCRIPTION FEATURES APPLICATIONS. LT1457 Dual, Precision JFET Input Op Amp TYPICAL PERFORMANCE CHARACTERISTICS
Dual, Precision JFET Input Op Amp FEATURES Handles 1,pF Capacitive Load 4µV Max Offset Voltage 1µV Max Offset Voltage in S8 Package pa Bias Current at 7 C 1nV/ Hz Voltage Noise 4V/µs Slew Rate 4µV/ C Drift
More informationQuad Picoampere Input Current Bipolar Op Amp AD704
a FEATURES High DC Precision 75 V Max Offset Voltage V/ C Max Offset Voltage Drift 5 pa Max Input Bias Current.2 pa/ C Typical I B Drift Low Noise.5 V p-p Typical Noise,. Hz to Hz Low Power 6 A Max Supply
More informationLow Power, Precision FET-INPUT OPERATIONAL AMPLIFIERS
OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 OPA3 Low Power, Precision FET-INPUT OPERATIONAL AMPLIFIERS FEATURES LOW QUIESCENT CURRENT: 3µA/amp OPA3 LOW OFFSET VOLTAGE: mv max HIGH OPEN-LOOP GAIN: db min HIGH
More informationSingle Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from + V to + V Dual Supply Capability from. V to 8 V Excellent Load
More informationMIC7300 A17. General Description. Features. Applications. Ordering Information. Pin Configurations. Functional Configuration.
MIC7300 High-Output Drive Rail-to-Rail Op Amp General Description The MIC7300 is a high-performance CMOS operational amplifier featuring rail-to-rail input and output with strong output drive capability.
More informationSingle Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from V to V Dual Supply Capability from. V to 8 V Excellent Load Drive
More informationLF411 Low Offset, Low Drift JFET Input Operational Amplifier
Low Offset, Low Drift JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed input
More informationMARKING DIAGRAMS ORDERING INFORMATION DUAL MC33272AP AWL YYWW PDIP 8 P SUFFIX CASE 626 SO 8 D SUFFIX CASE ALYWA QUAD
The MC33272/74 series of monolithic operational amplifiers are quality fabricated with innovative Bipolar design concepts. This dual and quad operational amplifier series incorporates Bipolar inputs along
More informationFeatures. Applications
Teeny Ultra-Low-Power Op Amp General Description The is a rail-to-rail output, input common-mode to ground, operational amplifier in Teeny SC70 packaging. The provides a 400kHz gain-bandwidth product while
More informationCMOS Quad Rail-to-Rail I/O Op Amp DESCRIPTION: FEATURES: Logic Diagram
6484 CMOS Quad Rail-to-Rail I/O Op Amp V+ IN+A IN+D IN-A OUT A OUT D IN-D V- IN+B OUT B OUT C IN+C IN-B Logic Diagram IN-C FEATURES: Rad-Pak technology-hardened against natural space radiation Total dose
More informationOP490. Quad Low Voltage Micropower Operational Amplifier FEATURES: DESCRIPTION: Logic Diagram (One Amplifier)
Quad Low Voltage Micropower Operational Amplifier Logic Diagram (One Amplifier) FEATURES: RAD-PAK technology-hardened against natural space radiation Total dose hardness: - > 100 krad (Si), depending upon
More informationMIC7122. General Description. Features. Applications. Ordering Information. Pin Configuration. Pin Description. Rail-to-Rail Dual Op Amp
MIC722 Rail-to-Rail Dual Op Amp General Description The MIC722 is a dual high-performance CMOS operational amplifier featuring rail-to-rail inputs and outputs. The input common-mode range extends beyond
More informationNJM324C. Low power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationnanopower Op Amp in a Tiny 6-Bump WLP
EVALUATION KIT AVAILABLE MAX4464 General Description The MAX4464 is an ultra-small (6-bump WLP) op amp that draws only 75nA of supply current. It operates from a single +.8V to +5.5V supply and features
More informationPIN CONNECTIONS ORDERING INFORMATION PIN CONNECTIONS P SUFFIX PLASTIC PACKAGE CASE 626 D SUFFIX PLASTIC PACKAGE CASE 751 (SO 8) Inputs P SUFFIX
Quality bipolar fabrication with innovative design concepts are employed for the MC33181/2/4, MC34181/2/4 series of monolithic operational amplifiers. This JFET input series of operational amplifiers operates
More informationLM6164/LM6264/LM6364 High Speed Operational Amplifier
LM6164/LM6264/LM6364 High Speed Operational Amplifier General Description The LM6164 family of high-speed amplifiers exhibits an excellent speed-power product in delivering 300V per µs and 175 MHz GBW
More information4 MHz, 7 nv/ Hz, Low Offset and Drift, High Precision Amplifier ADA EP
Enhanced Product FEATURES Low offset voltage and low offset voltage drift Maximum offset voltage: 9 µv at TA = 2 C Maximum offset voltage drift:.2 µv/ C Moisture sensitivity level (MSL) rated Low input
More informationLM6161/LM6261/LM6361 High Speed Operational Amplifier
LM6161/LM6261/LM6361 High Speed Operational Amplifier General Description The LM6161 family of high-speed amplifiers exhibits an excellent speed-power product in delivering 300 V/µs and 50 MHz unity gain
More informationNE/SA/SE5532/5532A Internally-compensated dual low noise operational amplifier
INTEGRATED CIRCUITS Supersedes data of 1997 Sep 29 21 Aug 3 DESCRIPTION The 5532 is a dual high-performance low noise. Compared to most of the standard s, such as the 1458, it shows better noise performance,
More informationDual operational amplifier
DESCRIPTION The 77 is a pair of high-performance monolithic operational amplifiers constructed on a single silicon chip. High common-mode voltage range and absence of latch-up make the 77 ideal for use
More informationLT MHz, 30V/µs 16-Bit Accurate A V 2 Op Amp. Description. Features. Applications. Typical Application
Features n Stable in Gain A (A = ) n MHz Gain Bandwidth Product n /μs Slew Rate n Settling Time: 8ns ( Step, ) n Specified at and Supplies n Low Distortion, 9.dB for khz, P-P n Maximum Input Offset oltage:
More informationLF442 Dual Low Power JFET Input Operational Amplifier
LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while
More informationAPPLICATIONS LT1351. Operational Amplifier DESCRIPTION FEATURES TYPICAL APPLICATION
FEATRES 3MHz Gain Bandwidth V/µs Slew Rate 5µA Supply Current Available in Tiny MSOP Package C-Load TM Op Amp Drives All Capacitive Loads nity-gain Stable Power Saving Shutdown Feature Maximum Input Offset
More informationSingle and Dual, Ultralow Distortion, Ultralow Noise Op Amps AD8597/AD8599 PIN CONFIGURATIONS FEATURES APPLICATIONS
Single and Dual, Ultralow Distortion, Ultralow Noise Op Amps FEATURES Low noise:. nv/ Hz at khz Low distortion: db THD @ khz Input noise,. Hz to Hz:
More informationDistributed by: www.jameco.com --3-44 The content and copyrights of the attached material are the property of its owner. MHz, 3nV/ Hz, A V Operational Amplifier FEATRES Gain-Bandwidth: MHz Gain of Stable
More informationFEATURES DESCRIPTIO APPLICATIO S TYPICAL APPLICATIO. LT1024 Dual, Matched Picoampere, Microvolt Input, Low Noise Op Amp
FEATURES Guaranteed Offset Voltage: 5µV Max Guaranteed Bias Current: 5 C: pa Max 55 C to 5 C: 7pA Max Guaranteed Drift:.5µV/ C Max Low Noise,.Hz to Hz:.5µV P-P Guaranteed Supply Current: 6µA Max Guaranteed
More informationCA3140, CA3140A. 4.5MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output. Description. Features. Applications. Ordering Information
November 99 SEMICONDUCTOR CA, CAA.MHz, BiMOS Operational Amplifier with MOSFET Input/Bipolar Output Features MOSFET Input Stage - Very High Input Impedance (Z IN ) -.TΩ (Typ) - Very Low Input Current (I
More informationLF353 Wide Bandwidth Dual JFET Input Operational Amplifier
LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage
More informationPrecision, Low Power, Micropower Dual Operational Amplifier OP290
a FEATURES Single-/Dual-Supply Operation, 1. V to 3 V,. V to 1 V True Single-Supply Operation; Input and Output Voltage Ranges Include Ground Low Supply Current (Per Amplifier), A Max High Output Drive,
More informationMIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp
MIC915 Dual 135MHz Low-Power Op Amp General Description The MIC915 is a high-speed, unity-gain stable operational amplifier. It provides a gain-bandwidth product of 135MHz with a very low, 2.4mA supply
More informationEVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp
19-227; Rev ; 9/1 EVALUATION KIT AVAILABLE Precision, High-Bandwidth Op Amp General Description The op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device
More informationLT622/LT6221/LT6222 ABSOLTE AXI RATI GS W W W Total Supply Voltage ( to ) V Input Voltage (Note 2)... ± Input Current (Note 2)... ±1mA Output S
FEATRES Gain Bandwidth Product: 6MHz Input Common Mode Range Includes Both Rails Output Swings Rail-to-Rail Low Quiescent Current: 1mA Max Input Offset Voltage: 3µV Max Input Bias Current: na Max Wide
More informationDual, Zero Drift, Single-Supply, Rail-to-Rail I/O, Operational Amplifier. Radiation tested to 10Krads (Si)
1.0 Scope Zero-Drift, Single-Supply Rail-to-Rail Input/Output Operational Amplifier AD8629S 1.1. This specification documents the detail requirements for space qualified product manufactured on Analog
More informationLF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier
LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed
More informationPrecision, Low Power, Micropower Dual Operational Amplifier OP290
Precision, Low Power, Micropower Dual Operational Amplifier OP9 FEATURES Single-/dual-supply operation:. V to 3 V, ±.8 V to ±8 V True single-supply operation; input and output voltage Input/output ranges
More informationNE/SA/SE532 LM258/358/A/2904 Low power dual operational amplifiers
INTEGRATED CIRCUITS NE/SA/SE53 Supersedes data of Jan Jul 1 DESCRIPTION The 53/358/LM94 consists of two independent, high gain, internally frequency-compensated operational amplifiers internally frequency-compensated
More informationDual Low Power Operational Amplifier, Single or Dual Supply OP221
a FEATURES Excellent TCV OS Match, 2 V/ C Max Low Input Offset Voltage, 15 V Max Low Supply Current, 55 A Max Single Supply Operation, 5 V to 3 V Low Input Offset Voltage Drift,.75 V/ C High Open-Loop
More informationLow Cost, Precision JFET Input Operational Amplifiers ADA4000-1/ADA4000-2/ADA4000-4
Low Cost, Precision JFET Input Operational Amplifiers ADA-/ADA-/ADA- FEATURES High slew rate: V/μs Fast settling time Low offset voltage:.7 mv maximum Bias current: pa maximum ± V to ±8 V operation Low
More informationNot Recommended for New Designs
Not Recommended for New Designs This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. The data sheet remains
More informationLM837 Low Noise Quad Operational Amplifier
LM837 Low Noise Quad Operational Amplifier General Description The LM837 is a quad operational amplifier designed for low noise, high speed and wide bandwidth performance. It has a new type of output stage
More informationORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 11 of this data sheet.
The MC3320/2/4 family of operational amplifiers provide railtorail operation on both the input and output. The inputs can be driven as high as 200 mv beyond the supply rails without phase reversal on the
More informationDATASHEET. Features. Applications. Related Literature ISL70227SRH. 36V Radiation Hardened Dual Precision Operational Amplifier
V OS (µv) DATASHEET ISL7227SRH 36V Radiation Hardened Dual Precision Operational Amplifier FN792 Rev 2. July 8, 24 The ISL7227SRH is a high precision dual operational amplifier featuring very low noise,
More informationQuad Low Offset, Low Power Operational Amplifier OP400
FEATURES Low input offset voltage: 5 µv maximum Low offset voltage drift over 55 C to 25 C:.2 μv/ C maximum Low supply current (per amplifier): 725 µa maximum High open-loop gain: 5 V/mV minimum Input
More informationPrecision, Low-Power and Low-Noise Op Amp with RRIO
MAX41 General Description The MAX41 is a low-power, zero-drift operational amplifier available in a space-saving, 6-bump, wafer-level package (WLP). Designed for use in portable consumer, medical, and
More informationUltraprecision Operational Amplifier OP177
Ultraprecision Operational Amplifier FEATURES Ultralow offset voltage TA = 25 C, 25 μv maximum Outstanding offset voltage drift 0. μv/ C maximum Excellent open-loop gain and gain linearity 2 V/μV typical
More informationAPPLICATIO S TYPICAL APPLICATIO. LT V Single Supply Video Difference Amplifier FEATURES DESCRIPTIO
FEATRES Differential or Single-Ended Gain Block Wide Supply Range V to.v Output Swings Rail-to-Rail Input Common Mode Range Includes Ground V/µs Slew Rate db Bandwidth = 7MHz, A V = ± CMRR at MHz: >db
More informationDESCRIPTIO FEATURES APPLICATIO S TYPICAL APPLICATIO. LT1813/LT1814 Dual/Quad 3mA, 100MHz, 750V/µs Operational Amplifiers
/ LT8 FEATRES MHz Gain Bandwidth Product 75V/µs Slew Rate 3.6mA Maximum Supply Current per Amplifier Tiny 3mm x 3mm x.8mm DFN Package 8nV/ Hz Input Noise Voltage nity-gain Stable.5mV Maximum Input Offset
More informationAD8613/AD8617/AD8619. Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers PIN CONFIGURATIONS FEATURES APPLICATIONS
Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers FEATURES Offset voltage: 2.2 mv maximum Low input bias current: pa maximum Single-supply operation:.8 V to 5 V Low
More informationUltraprecision, 36 V, 2.8 nv/ Hz Dual Rail-to-Rail Output Op Amp AD8676
Ultraprecision, 36 V, 2. nv/ Hz Dual Rail-to-Rail Output Op Amp AD676 FEATURES Very low voltage noise: 2. nv/ Hz @ khz Rail-to-rail output swing Low input bias current: 2 na maximum Very low offset voltage:
More informationDistributed by: www.jameco.com -8-8-22 The content and copyrights of the attached material are the property of its owner. FEATRES Input Bias Current, Warmed p: pa Max % Tested Low Voltage Noise: 8nV/ Hz
More informationI/O Op Amps with Shutdown
MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered
More information