DLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate.
|
|
- Samuel Jackson
- 6 years ago
- Views:
Transcription
1 DLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate. Instructions for Use Discontinued June 2016 DSEM/TRM/0517/0844(1)
2
3 Table of Contents Introduction DLS Dynamic Locking Screw 2 Indications 5 Instructions for Use Dynamic Locking Screw Technique 6 Compatibility with the LCP Percutaneous 13 Instrument System 3.5 Implant Removal 14 Product Information Technical Information 15 Implants 16 Instruments for DLS 3.7 mm 18 Instruments for DLS 5.0 mm 20 Image intensifier control Warning This description alone does not provide sufficient background for direct use of the product. Instruction by a surgeon experienced in handling this product is highly recommended. Reprocessing, Care and Maintenance of Synthes Instruments For general guidelines, function control and dismantling of multi-part instruments, please refer to: Dynamic Locking Screw Instructions for Use Synthes 1
4 DLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate. DLS Dynamic Locking Screw Angular stable screw Locking screws can be placed in each threaded hole of the appropriate LCP. Stardrive recess. For better torque transmission. Screws lock tightly in the plate to: eliminate tension on the bone eliminate compression between plate and bone protect periosteum from potential damage and retain circulation Pin-sleeve design of the DLS allows micro-motion within the angular stable system. DLS can be used with all Synthes titanium or stainless steel locking plates. Cobalt chromium molybdenum alloy (CoCrMo) enables DLS to be as strong as standard locking screws. CoCrMo encourages less ingrowth and facilitates screw removal similar to stainless steel screws. Laserwelded. For stable fixation between pin and sleeve. 2 Synthes Dynamic Locking Screw Instructions for Use
5 Principle of Dynamic Locking Screw (DLS) Standard locking head. Compatible with all Synthes locking plates. DLS allows surgeons to modulate the rigidity of the locked plate construct for better load distribution. Pin-sleeve design. Micro-motion within the screw. DLS construct can deliver nearly parallel fracture site motion. Standard thread in the shaft. For strong anchorage in bone. Boosting biological bone healing: Micro-motions on the plate-side of the locking construct improve circumferential callus formation. New screw tip. Rounded tip and five flute design. Dynamic Locking Screw Instructions for Use Synthes 3
6 LCP Locking Compression Plate Provides angular stable support of fragments regardless of bone quality Reduces risk of primary and secondary loss of reduction even under high dynamic loading Reduces impairment of periosteal blood supply due to limited plateperiosteum contact Maintains favorable hold in osteoporotic bone and multiple fragment fractures LCP combi-hole B A A. Stable plate-screw connection Locking screws reduce screw loosening Excessive torque is not applied to the cortical bone The conical screw head facilitates screw insertion B. Compatibility The proven dynamic compression hole allows for use of all standard screws DLS Self-tapping dynamic locking screw Requires precise measurement of length (diaphysis and metaphysis) Bicortical use in the shaft Not necessary to separately tap thread Standard screw Dynamic compression is created by the eccentric insertion of the standard screw (analogous to LC-DCP) Self-tapping locking screw Requires precise measurement of length (metaphysis) Monocortical or bicortical use Not necessary to separately tap thread 4 Synthes Dynamic Locking Screw Instructions for Use
7 Indications Synthes Dynamic Locking Screws (DLS) in combination with Synthes Locking Compression Plates (LCP) are intended for the fixation of metaphyseal and diaphyseal shaft fractures of long bones (humerus, femur and tibia). The DLS allows micro-motion within the angular stable system. Synthes offers a wide selection of LCP plates, which covers a correspondingly extensive variety of indications. For this reason, this technical guide does not cover specific indications or the selection of a plate type for specific clinical situations. For treatment of these subjects, please refer to AO Principles of Fracture Management, courses offered by the AO ( and the corresponding professional literature. For general purposes, the following techniques for handling the implants and instruments will be demonstrated with a straight 3.5 mm LCP and DLS 3.7 mm. Important: The DLS 3.7 mm has a 0.2 mm larger shaft thread diameter compared to the standard locking screw 3.5 mm. Therefore dedicated instruments for DLS 3.7 mm (drill bit and drill sleeve) have to be used. The other instruments stay the same. Standard locking screw 5.0 instrumentation can be used for the DLS 5.0 (see pages 19 and 20). Dynamic Locking Screw Instructions for Use Synthes 5
8 Dynamic Locking Screw Technique 1 Reduce and fix fracture Reduce the fracture under image intensification. As needed, provide fixation with a Kirschner wire or reduction forceps. 2 Bend plate Instruments Bending Iron for Plates 2.4 to 3.5 length 145 mm (for use with ) Bending Iron for Plates 2.4 to 3.5 length 145 mm (for use with ) Bending Pliers for Plates 2.4 to 4.0, length 230 mm Bending Pliers for Reconstruction Plates 2.7 and 3.5 Adapt the LCP plate to the anatomy using the appropriate bending instruments (as for standard plates), especially in the case of joint fractures. Notes Do not bend the plate back and forth. The LCP combi-holes are asymmetrical in the plate. In straight plates, the hole alignment changes in the middle of the plate. This asymmetry enables exertion of unidirectional dynamic compression. 6 Synthes Dynamic Locking Screw Instructions for Use
9 3 Position and fix plate Position and fix the plate on the bone. Important: Before setting the first dynamic locking screw, ensure that the plate is provisionally well fixed in place. Otherwise the plate may rotate during screw locking, causing damage to surrounding soft tissue. Dynamic Locking Screw Instructions for Use Synthes 7
10 Dynamic Locking Screw Technique 4 Prepare DLS drill sleeve Instrument DLS Drill Sleeve 3.7, for Drill Bits 3.1 mm Carefully screw the DLS drill sleeve into the desired LCP hole until it is gripped completely by the thread. The DLS drill sleeve ensures that the dynamic locking screw is correctly locked in the plate. Angular stability is reduced if a locking screw is inserted obliquely. Technique tip: To make it easier for the drill sleeve to locate the start of the thread, it may be useful to slightly rotate the drill sleeve counterclockwise. Note: In precontoured plates, the threaded holes might not be perpendicular to the plate surface due to the anatomy. Important: Only use the white color-coded DLS drill sleeve with the white color coded drill bit for DLS 3.7 mm. For the DLS 5.0 mm the standard drill sleeve and drill bit as for standard locking screws can be used. 8 Synthes Dynamic Locking Screw Instructions for Use
11 5 Predrill screw hole and determine screw length Instrument DLS Drill Bit 3.1 mm with Stop, length 165 mm, 2-flute, for Quick Coupling Carefully drill the screw hole using an appropriate drill bit. Remove the drill sleeve. Important: Only use the white color-coded DLS drill bit for DLS 3.7 mm to ensure the correctly sized drill hole. Example showing measured length of 24 mm. 6 Option: Determine screw length Instrument Depth Gauge Determine the screw length with the depth gauge. Example showing measured length of 24 mm. Dynamic Locking Screw Instructions for Use Synthes 9
12 Dynamic Locking Screw Technique 7 Insert Dynamic Locking Screw Instruments Torque Limiter, 1.5 Nm Torque Limiter, 1.5 Nm, for AO/ASIF Quick Coupling Screwdriver Shaft T15, self-holding Handle for Torque Limiter Nos and Handle with Quick Coupling Before insertion of the first dynamic locking screw, anatomical reconstruction must have occurred. After insertion of the dynamic locking screws, additional reduction cannot be achieved without removing the dynamic locking screws. The dynamic locking screws can either be inserted with a power tool (without final locking) or manually and always with a torque limiter. Important Always insert the dynamic locking screw with the dedicated torque limiter. 3 or more dynamic locking screws must be inserted for each segment / fragment. Do not combine standard locking screws and/or standard screws with DLS in the same segment/fragment. This will nullify the dynamization and might overload the standard locking screw; however, one fragment can be fixed with a standard locking screw and another with DLS. Note: Do not press the plate onto the bone. This will nullify the dynamization. 10 Synthes Dynamic Locking Screw Instructions for Use
13 7a Insertion with power tool To insert the dynamic locking screw using a power tool, fit a torque limiter to the power tool. Then insert the screwdriver shaft into the torque limiter. Pick up the dynamic locking screw and insert it into the plate hole. To insert the screw, start the power tool slowly, increasing the speed and then reducing it again before the dynamic locking screw is fully tightened. Uncouple the power tool and mount the handle for torque limiter or the handle with quick coupling and manually tighten the screw. After one click, the optimum torque is reached. Notes To reduce the risk of stripping the screw head, do not lock dynamic locking screws at full speed. Screw head stripping can cause difficulty in removing the implant. For long screws and thick cortical bone, ensure sufficient cooling during insertion. Important: Always insert the dynamic locking screw with the dedicated torque limiter: DLS 3.7 mm TLA 1.5 Nm DLS 5.0 mm TLA 4.0 Nm Dynamic Locking Screw Instructions for Use Synthes 11
14 Dynamic Locking Screw Technique 7b Manual insertion To insert the dynamic locking screw manually, attach the torque limiter handle to the torque limiter and insert a screwdriver shaft. Screw in the dynamic locking screw, and lock it in the plate. Important Always insert and lock the dynamic locking screw with the dedicated torque limiter: DLS 3.7mm TLA 1.5 Nm DLS 5.0mm TLA 4.0 Nm The dynamic locking screw is only available with Stardrive recess and should only be used with the appropriate Stardrive screwdriver. Do not use the hexagonal screwdriver. Note: Under image intensification you can identify the pinsleeve design of the DLS. 12 Synthes Dynamic Locking Screw Instructions for Use
15 Compatibility with the LCP Percutaneous Instrument System 3.5 mm The LCP Percutaneous Instrument Set 3.5 mm consists of a comprehensive series of aiming arms and instrumentation to facilitate the percutaneous, submuscular insertion of various plates. The DLS 3.7 mm is compatible with the LCP Percutaneous Instrument System 3.5 mm. For the use of the DLS 3.7 with LCP Percutaneous Instrument System 3.5 the LCP Small Fragment Percutaneous Instrument Set 3.5 needs to be upgraded with the following instruments: Drill Bit 3.1 mm with Stop, calibrated, length 250/225 mm, for Quick Coupling Locking Drill Sleeve 3.1 mm, percutaneous For the complete instruction and technique details of the use of the LCP Percutaneous Instrument System 3.5 please refer to technique guide LCP Low Bend Medial Distal Tibia Plate Aiming Instruments 3.5 mm and LCP Per cutaneous Aiming System 3.5 for PHILOS Dynamic Locking Screw Instructions for Use Synthes 13
16 Implant Removal To remove the plate, first remove tissue and bone from all screw heads and drives. Insert a screwdriver in the screw recess and unlock all screws manually. Then completely remove all screws. If the screws cannot be removed with the screwdriver, consult the separate Synthes publication Screw Extraction Set: Instruments for removing Synthes screws (Art. No : pages (Situation B) and pages 44 47), which explains how broken screws can be removed. These are the specific instruments for the extraction of the dynamic locking screws: DLS 3.7 mm: Hollow Reamer, complete, anticlockwise cutting, for Screws 3.5 and 4.0 mm Spare Reamer Tube, for No Extraction Bolt, for Screws 3.5 and 4.0 mm Extraction Screw, conical, for Screws 1.5 and 2.0 mm Extraction Screw, conical, for Screws 2.7, 3.5 and 4.0 mm DLS 5.0 mm: Hollow Reamer, complete, anticlockwise cutting, for Screws 4.5 mm Spare Reamer Tube, for No Extraction Bolt, for Screws 4.5 and 5.0 mm Extraction Screw, conical, for Screws 2.7, 3.5 and 4.0 mm Extraction Screw for Screws 3.5 mm 14 Synthes Dynamic Locking Screw Instructions for Use
17 Technical Information Screw and pin lengths DLS 3.7 The two shortest screws (22 and 24 mm) have a shorter pin, and all longer screws (26 70 mm) have the same longer length pin. The result is a comparable elastic behavior across all screw lengths. DLS 5.0 The three shortest screws (32 36 mm) have a shorter pin, and all longer screws (38 90 mm) have the same longer length pin. The result is a comparable elastic behavior across all screw lengths. Short Pin * 22 and 24 mm Long Pin * * mm Short Pin mm Long Pin * * * mm * Maximum deflection 0.2 mm * Maximum deflection 0.35 mm Dynamic Locking Screw Instructions for Use Synthes 15
18 Implants DLS 3.7 Dynamic Locking Screw 3.7 mm, self-tapping CoCrMo Sterile Art no. Length (mm) S S S S S S S S S S S S S S S S S S S S S S S 70 Warning: Do not resterilize the Dynamic Locking Screw. 16 Synthes Dynamic Locking Screw Instructions for Use
19 DLS 5.0 Dynamic Locking Screw 5.0 mm, self-tapping CoCrMo Sterile Art no. Length (mm) S S S S S S S S S S S S S S S S S S 90 Warning: Do not resterilize the Dynamic Locking Screw. Dynamic Locking Screw Instructions for Use Synthes 17
20 Instruments for DLS 3.7 mm Dedicated instruments for DLS 3.7 mm DLS Drill Sleeve 3.7, for Drill Bits 3.1 mm DLS Drill Bit 3.1 mm with Stop, length 165 mm, 2-flute, for Quick Coupling Small fragment instruments Bending Iron for Plates 2.4 to 3.5, length 145 mm (for use with ) Bending Iron for Plates 2.4 to 3.5, length 145 mm (for use with ) Bending Pliers for Plates 2.4 to 4.0, length 230 mm Bending Pliers for Reconstruction Plates 2.7 and Depth Gauge for Screws 2.7 to 4.0 mm, measuring range up to 60 mm Torque Limiter, 1.5 Nm, for Compact Air Drive and for Power Drive Torque Limiter, 1.5 Nm, for AO/ASIF Quick Coupling 18 Synthes Dynamic Locking Screw Instructions for Use
21 Screwdriver Shaft Stardrive 3.5, T15, self-holding, for AO/ASIF Quick Coupling Handle for Torque Limiter Nos and Handle with Quick Coupling Dynamic Locking Screw Instructions for Use Synthes 19
22 Instruments for DLS 5.0 mm Large fragment instruments LCP Drill Bit 4.3 mm with Stop, length 221 mm, 2-flute, for Quick Coupling LCP Drill Sleeve 5.0, for Drill Bits 4.3 mm Universal Drill Guide 4.5/3.2, for neutral and load position LCP Universal Drill Guide 4.5/ Screwdriver Shaft Stardrive 4.5/5.0, T25, self-holding, for AO/ASIF Quick Coupling Screwdriver Stardrive 4.5/5.0, T25, with Groove, length 240 mm 20 Synthes Dynamic Locking Screw Instructions for Use
23 Torque-limiting Screwdriver Stardrive, T25, self-holding, for Locking Screws 5.0 mm Holding Sleeve for Screws, for LCP 4.5/ Handle for Torque Limiter Nos and Torque Limiter, 4 Nm, for Compact Air Drive and Power Drive Dynamic Locking Screw Instructions for Use Synthes 21
24 All technique guides are available as PDF files at Ö öABNä version AB 10/ Synthes, Inc. or its affiliates Subject to modifications Synthes is a trademark of Synthes, Inc. or its affiliates
Instructions for Use. LCP Locking Compression Plate. Combine without Compromise.
Instructions for Use LCP Locking Compression Plate. Combine without Compromise. Table of Contents LCP: Combine without Compromise 2 AO ASIF Principles of Osteosynthesis 4 Indications and Contraindications
More informationTechnique Guide. LCP Pilon Plate 2.7/3.5
Technique Guide LCP Pilon Plate 2.7/3.5 LCP Pilon Plate 2.7/3.5 Table of contents Indications 3 Implants 4 Instruments 5 Surgical technique 6 Implant removal 12 Image intensifier control Warning This
More informationLCP Pilon Plate 2.7/3.5
Surgical Technique LCP Locking Compression Plate Original Instruments and Implants of the Association for the Study of Internal Fixation AO/ASIF Table of contents Indications 3 Implants 4 Instruments 5
More informationLCP Pilon Plate 2.7/3.5
LCP Pilon Plate 2.7/3.5 Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Table of contents Indications 2 Implants
More informationTechnique Guide. Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5.
Technique Guide Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5. Table of Contents Introduction Quadrilateral Surface Plates 3.5 2 AO Principles 4 Indications 5 Surgical Technique
More informationSmall Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE
Small Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE R Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF Introduction
More informationLCP Pilon Plate 2.7/3.5. Surgical Technique
LCP Pilon Plate 2.7/3.5 Surgical Technique Image intensifier control This description alone does not provide sufficient background for direct use of DePuy Synthes products. Instruction by a surgeon experienced
More informationVariable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot.
Instruction for Use Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot. Table of Contents Introduction VA-LCP Forefoot/Midfoot
More informationTechnique Guide. Variable Angle LCP Opening Wedge Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7.
Technique Guide Variable Angle LCP Opening Wedge Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7. Table of Contents Introduction Variable Angle LCP Opening Wedge Plates
More informationHCS 2.4/3.0. The countersinkable compression screw.
Technique Guide HCS 2.4/3.0. The countersinkable compression screw. Table of Contents Introduction Features and Benefits 2 Functional Principle 3 Indications 4 Surgical Technique Hand Scaphoid 5 Foot
More information1.5 MM LCP SYSTEM. For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE
1.5 MM LCP SYSTEM For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION 1.5 mm LCP System 2 AO Principles 4 SURGICAL TECHNIQUE Reduce Fracture
More informationVariable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7.
Variable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants
More informationCannulated Percutaneous Guiding System. For percutaneous placement of 3.5 mm pelvic and cortex screws in the pelvic area.
Cannulated Percutaneous Guiding System. For percutaneous placement of 3.5 mm pelvic and cortex screws in the pelvic area. Technique Guide This publication is not intended for distribution in the USA. Instruments
More informationTechnique Guide. 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate.
Technique Guide 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate. Table of Contents Introduction 2.4/2.7 mm Locking Tarsal Plates 2 AO Principles 4 Indications 5 Clinical
More informationVariable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates.
Variable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO
More informationTechnique Guide. Variable Angle LCP 1 st MTP Fusion Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7.
Technique Guide Variable Angle LCP 1 st MTP Fusion Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7. Table of Contents Introduction Variable Angle LCP 1 st MTP Fusion
More informationHCS 1.5. The countersinkable compression screw.
HCS 1.5. The countersinkable compression screw. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Table of Contents
More informationTechnique Guide. Cable System. For Orthopaedic Trauma Surgery.
Technique Guide Cable System. For Orthopaedic Trauma Surgery. Table of Contents Introduction Overview 2 AO Principles 4 Indications and Contraindications 5 Surgical Technique Standard Cerclage Technique
More information3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP )
For Minimally Invasive Osteosynthesis 3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP ) Surgical Technique Table of Contents Introduction 3.5 mm and 4.5 mm Curved Locking Compression 2 Plates
More informationInstruments for removing Synthes screws. Screw Extraction Set. Handling Technique
Instruments for removing Synthes screws Screw Extraction Set Handling Technique Image intensifier control This description alone does not provide sufficient background for direct use of DePuy Synthes products.
More informationInstruments for Removing DePuy Synthes Screws. Screw Removal Set
Instruments for Removing DePuy Synthes Screws Screw Removal Set Surgical Technique Table of Contents Introduction Screw Removal Set 2 Surgical Technique Preoperative Planning and Preparation 6 Removal
More informationSynthes Kirschner Wires and Cerclage Wires. Multifunctional devices for temporary fixation, tension band, cerclage wiring and percutaneous pinning.
Technique Guide Synthes Kirschner Wires and Cerclage Wires. Multifunctional devices for temporary fixation, tension band, cerclage wiring and percutaneous pinning. Image intensifier control Warning This
More informationTechnique Guide Supplement. Standard DHS Lag Screw with LCP DHHS Sideplate.
Technique Guide Supplement Standard DHS Lag Screw with LCP DHHS Sideplate. Table of Contents Surgical Technique Standard DHS Lag Screw with LCP DHHS 2 Sideplate Technique DHS One-step Lag Screw with DHHS
More informationDISTAL RADIUS PLATES 3.5 mm / ANGULARLY STABLE. Distal radius plates 3,5 mm / angularly stable. Locking bone screws. Cortical bone screw
SURGICAL NÁSTROJE TECHNIQUE PRO ARTROSKOPII DISTAL INSTRUMENTS RADIUS PLATES FOR ARTHROSCOPY 3.5 mm / ANGULARLY STABLE Distal radius plates 3.5 mm / angularly stable Indication The plates are used for
More informationTechnique Guide. 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. TableofContents Introduction 4.5 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More informationUJAM AA O RTHO PTY LTD 100 HYDE PARK C LO SE HYDE PARK 2196 W W W.UJAM AAO RTHO.C O M
UJAM AA O RTHO PTY LTD 100 HYDE PARK C LO SE HYDE PARK 2196 W W W.UJAM AAO RTHO.C O M 4.0mm Cannulated Screw Set 112730000 112730100 Guide Wire, φ1.25 112730200 Guide Sleeve, φ1.25/φ3.0 110190300 Drill
More information6.5 mm and 7.3 mm Cannulated Screws Technique Guide
6.5 mm and 7.3 mm Cannulated Screws Technique Guide An Integral Part of the SYNTHES Cannulated Screw System Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF
More information3.5 mm Cannulated Screw Technique Guide
3.5 mm Cannulated Screw Technique Guide An Integral Part of the SYNTHES Cannulated Screw System Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF The 3.5 mm
More informationCable System. For Orthopaedic Trauma Surgery.
Cable System. For Orthopaedic Trauma Surgery. Surgical Technique This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation. Image intensifier
More informationVECTRA. SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.
VECTRA. Anterior cervical plate system. This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE Contents Indications and contraindications Implants Vario Case Instruments Surgical
More informationTechnique Guide. Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.
Technique Guide Modular Sternal Cable System. Flexibility and strength in sternal closure and repair. Table of Contents Introduction Overview 2 Indications and Contraindications 3 Surgical Technique A.
More informationDistal Medial Tibia Plate Surgical Technique
Locking Compression Technology by aap 1 Disclaimer This surgical technique is exclusively intended for medical professionals, especially physicians, and therefore may not be regarded as a source of information
More informationLocking Small Fragment
Locking Small Fragment Page 1 Locking Small Fragment Table of contents Implants 5 Operation technique 7 Inserting drill guides 7 Drilling 7 Length measurement 7 Inserting the measured screw 8 Different
More informationTechnique Guide. Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.
Technique Guide Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput. Table of Contents Introduction Overview 2 AO ASIF Principles 4 Indications and Contraindications
More informationTechnique Guide. 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.
Technique Guide 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System. Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique Surgical
More informationCerclage Passer. For minimally invasive application of cerclage cables.
Cerclage Passer. For minimally invasive application of cerclage cables. Handling Technique Cable application This publication is not intended for distribution in the USA. Instruments and implants approved
More information2.4 mm Cannulated Screw. An integral part of the Synthes Cannulated Screw System (CSS).
2.4 mm Cannulated Screw. An integral part of the Synthes Cannulated Screw System (CSS). Surgical Technique This publication is not intended f distribution in the USA. and implants approved by the AO Foundation.
More informationUniversal Humeral Nail
990210009 INDEX Indications Preoperative Planning Patient Position Surgical Technique - Step 1 Open Humerus - Step 2 Calibrate The Nail - Step 3 Insert Nail - Step 4 Proximal Locking - Step 5 Assemble
More informationOccipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.
Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput. Technique Guide This publication is not intended for distribution in the USA. Instruments and implants
More informationACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE
ACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE Instruments and implants approved by the AO Foundation ACLP Anterior Cervical Locking Plate System The ACLP System is designed to reduce the
More informationCannulated Screws Ø 3.5 mm / 4.5 mm
Cannulated Screws Ø / 4.5 mm Table of contents Implants Ø 4 Implants Ø 4.5 mm 6 Operation technique - Ø Cannulated Screws 9 Reduce fracture and insert guide wire 9 Determine the screw length 9 Drilling
More informationPart of the DePuy Synthes Cannulated Screw System. 3.5 mm Cannulated Screws
Part of the DePuy Synthes Cannulated Screw System 3.5 mm Cannulated Screws Surgical Technique Table of Contents Introduction 3.5 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique
More information2.4 mm and 3.0 mm Headless Compression Screws
For Fixation of Small Bones and Small Bone Fragments 2.4 mm and 3.0 mm Headless s Surgical Technique Table of Contents Introduction 2.4 mm and 3.0 mm Headless 2 Technique Overview 4 AO Principles 5 Indications
More informationTitanium Modular Hand System. For fractures, replantations and reconstruction of the hand.
Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand. Plates precontoured for anatomic fit Instruments colorcoded for easy recognition Modules for 1.0 mm to 2.4 mm
More informationVECTRA SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.
VECTRA Anterior cervical plate system This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE Image intensifier control This description alone does not provide sufficient background
More informationThe Percutaneous Reduction Forceps Technique Guide
The Percutaneous Reduction Forceps Technique Guide Indications + Product Overview Introduction The Percutaneous Reduction Forceps The Percutaneous Reduction Forceps facilitate standard technique for fixation
More informationThe Titanium Cannulated Lateral Entry Femoral Recon Nail. Expert nailing system with radiolucent instrumentation.
The Titanium Cannulated Lateral Entry Femoral Recon Nail. Expert nailing system with radiolucent instrumentation. Technique Guide EXPERT Nailing System Table of Contents Introduction Titanium Cannulated
More informationProximal Humerus System 3.5
SURGICAL TECHNIQUE STEP BY STEP Proximal Humerus System 3.5 APTUS Shoulder 2 Proximal Humerus System 3.5 Contents 3 Introduction 3 Product Materials 3 Indications 3 Contraindications 3 Color Coding 3 Symbols
More informationOPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM. foot & ankle trauma procedures
OPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM foot & ankle trauma procedures INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 5 OPERATIVE TECHNIQUE 7
More informationOccipito-Cervical Fusion System
Implants and Instruments designed to enhance Fixation to the Occiput Occipito-Cervical Fusion System Surgical Technique Image intensifier control This description alone does not provide sufficient background
More informationOCCIPITO-CERVICAL FUSION SYSTEM Implants and instruments designed to optimize fixation to the occiput
OCCIPITO-CERVICAL FUSION SYSTEM Implants and instruments designed to optimize fixation to the occiput Instruments and implants approved by the AO Foundation. This publication is not intended for distribution
More informationTechnique Guide. Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine.
Technique Guide Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine. Table of Contents Introduction Synapse System 2 AO Principles
More informationVARIABLE ANGLE LOCKING HAND SYSTEM
VARIABLE ANGLE LOCKING HAND SYSTEM For fragment-specific fracture fixation with variable angle locking and locking technology Instruments and implants approved by the AO Foundation. This publication is
More informationDistal Radius System 2.5
SURGICAL TECHNIQUE STEP BY STEP Distal Radius System 2.5 APTUS Wrist 2 Distal Radius System 2.5 Contents 3 Introduction 3 Product Materials 3 Indications 3 Contraindications 3 Color Coding 3 Possible Combination
More informationTop Loading Pedicle Screw and Hook System for Posterior Stabilization. URS System. Surgical Technique
Top Loading Pedicle Screw and Hook System for Posterior Stabilization URS System Surgical Technique Image intensifier control This description alone does not provide sufficient background for direct use
More informationTechnique Guide. Synapse System. An enhanced set of implants and instruments for posterior stabilization of the cervical and upper thoracic spine.
Technique Guide Synapse System. An enhanced set of implants and instruments for posterior stabilization of the cervical and upper thoracic spine. Image intensifier control Warning This description alone
More informationFibula Plating System
ANATOMIC LOCKED PLATING SYSTEM Fibula Plating System Securing optimal fixation through versatile locked and compression plating technology Contents Surgeon Design Team 2 Introduction 3 Anatomic Fibula
More informationVortex TRAUMATOLOGY. Vortex Distal Femur
Vortex TRAUMATOLOGY Vortex Distal Femur 1 Content 1. Introduction 4 4. Implant list 16-17 The following surgical description contains general outlines for Vortex Distal Femur plating. However, the operating
More informationTechnique Guide. LCP Dynamic Helical Hip System (DHHS). Part of the Synthes Large Fragment LCP System.
Technique Guide LCP Dynamic Helical Hip System (DHHS). Part of the Synthes Large Fragment LCP System. Table of Contents Introduction LCP Dynamic Helical Hip System (DHHS) 2 AO Principles 4 Indications
More informationUlna Shortening System 2.5
SURGICAL TECHNIQUE STEP BY STEP Ulna Shortening System 2.5 APTUS Wrist 2 Ulna Shortening System 2.5 Contents 3 Introduction Product Materials Indications Contraindications Color Coding 4 General Instrument
More informationVLP FOOT Variable Angle Locked Plating System
Surgical Technique VLP FOOT Variable Angle Locked Plating System Surgical Technique Table of Contents Product overview Implant selection...2 Introduction...3 System overview...4 Indications...4 Design
More information3.5 MM low-profile cortex screws
3.5 MM low-profile cortex screws Low-profle fxation option compatible with all Trauma 3.5 mm plates MechanicallY comparable To DEPUY SYNTHES TRAUMA standard 3.5 MM cortex screws low-profile option To MiniMiZe
More informationWRIST SYSTEM. ARIX Volar Distal Radius Locking Plate System
WRIST SYSTEM A Contents 3 4 7 14 15 16 19 21 Indications Product Overview Features & Benefits Ordering Information - Screws -2.5mm Self-Tapping Cortical Screws (Non-Locking) -2.5mm Self-Tapping Locking
More informationLag Screw Device TECHNIQUE GUIDE. Indicated for symphyseal fracture fixation of the mandible. Instruments and implants approved by the AO Foundation
Lag Screw Device TECHNIQUE GUIDE Indicated for symphyseal fracture fixation of the mandible Instruments and implants approved by the AO Foundation Lag Screw Device Indicated for symphyseal fracture fixation
More information7.0 mm Cannulated Screws
Part of the DePuy Synthes Cannulated Screw System 7.0 mm Cannulated Screws Surgical Technique Table of Contents Introduction 7.0 mm Cannulated Screws 2 AO Principles 3 Indications 4 Surgical Technique
More informationSpeedTip CCS 5.0, 7.0
SURGICAL TECHNIQUE STEP BY STEP SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws APTUS 2 SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws SpeedTip CCS 5.0, 7.0 Cannulated Compression Screw 3 SpeedTip
More informationOPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS. foot & ankle applications
OPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS foot & ankle applications INTRODUCTION 3 SYSTEM DESCRIPTION 3 TECHNICAL DETAILS 4 SALES AND MARKETING CONFIGURATION 6 OPERATIVE
More informationExpert HAN. Expert Hindfoot Arthrodesis Nail.
Expert HAN. Expert Hindfoot Arthrodesis Nail. Technique Guide Expert Nailing System Table of Contents Introduction Expert Hindfoot Arthrodesis Nail 2 AO Principles 4 Indications 5 Surgical Technique Preoperative
More informationOrthopedic Bone Nail System Universal Humeral Nail
Orthopedic Bone Nail System Universal Humeral Nail Surgical Technique Manual Note: The surgical procedures should be performed under the guidance of qualified skilled orthopedic surgeons, and this surgical
More informationAnkle Fracture System. Surgical Technique STRENGTH FROM WITHIN
Ankle Fracture System Surgical Technique STRENGTH FROM WITHIN Ankle Fracture System The Sonoma FibuLock nail is the first intramedullary device that has the same indications as plates and delivers anatomic
More informationURS Degen. Top loading pedicle screw system for posterior stabilization.
URS Degen. Top loading pedicle screw system for posterior stabilization. Technique Guide This publication is not intended for distribution in the USA. Table of Contents Introduction URS Degen 2 AO Principles
More informationOsteoBridge IKA Intramedullary Knee Arthrodesis Fixation System. From the «BioBall Company» OsteoBridge Family
From the «BioBall Company» OsteoBridge Family OsteoBridge IKA Intramedullary Knee Arthrodesis Fixation System The modular system for the fixation of the knee joint 01. OsteoBridge IKA The OsteoBridge IKA
More informationIntegra. Stainless Headed Compression Screw System SURGICAL TECHNIQUE
Integra Stainless Headed Compression Screw System SURGICAL TECHNIQUE Table of Contents Design Rationale...2 Indications...2 Contraindications...2 Surgical Technique Step 1: Inserting Guide Wire... 3 Step
More informationProximal Humerus Plate 3.5 Surgical Technique
Locking Compression Technology by aap 1 Disclaimer This surgical technique is exclusively intended for medical professionals, especially physicians, and therefore may not be regarded as a source of information
More informationSpeedTip CCS 5.0, 7.0
SURGICAL TECHNIQUE STEP BY STEP SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws APTUS 2 SpeedTip CCS 5.0, 7.0 Cannulated Compression Screws Contents 3 Introduction Product Materials Indications Contraindications
More informationTechnique Chart. DHS/DCS One-Step Insertion Wrench. For use with DHS/DCS One-Step Lag Screws.
Technique Chart DHS/DCS One-Step Insertion Wrench. For use with DHS/DCS One-Step Lag Screws. DHS/DCS One-Step Insertion Wrench DHS Triple Reamer (338.13) Assembly 338.10 8.0 mm Drill Bit 338.11 DHS Reaming
More informationScrew Removal Set
R 105.971 Screw Removal Set 105.971 Screw Removal Set 690.372 Screw Removal Set Graphic Case............................................ 1 ea. Instruments 309.035 Hollow Reamer, complete, for 3.5 mm Cortex,
More informationVARIABLE ANGLE LOCKING HAND SYSTEM
VARIABLE ANGLE LOCKING HAND SYSTEM For fragment-specific fracture fixation with variable angle locking and locking technology SURGICAL TECHNIQUE TABLE OF CONTENTS INTRODUCTION Variable Angle Locking Hand
More information2.0. Contents Function control
Contents 2.0 Drill bits 2.1 Medullary reamer heads 2.2 Burrs 2.3 Bone taps 2.4 Drill sleeves with serrated ends 2.5 Drill guides for plates 2.6 Aiming device 2.7 Pointed drill guide 2.8 Quick coupling
More informationCSLP Variable Angle. For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE. Self-drilling Screw. Variable Screw Angulation
CSLP Variable Angle For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE Self-drilling Screw Variable Screw Angulation Original Instruments and Implants of the Association for the Study
More informationMINI INSTRUMENTS & IMPLANTS
Page 1 MINI INSTRUMENTS & IMPLANTS Page 2 JACOB CHUCK DRILL BITS MIS-001 1.1MM 45MM LENGTH MIS-002 1.5MM 70MM LENGTH MIS-003 2.0MM 85MM LENGTH MIS-004 2.7MM 85MM LENGTH QUICK COUPLING DRILL BITS MIS-005
More information3.5 mm/ 2.7 mm LCP. PanCarPaL arthrodesis S PLate. BroCHUre. For treatment of carpal joints in dogs
3.5 mm/ 2.7 mm LCP PanCarPaL arpal arthrodesis S PLate For treatment of carpal joints in dogs BroCHUre PLate DeSIGn the DePuy Synthes Vet 3.5 mm/2.7 mm LCP Pancarpal arthrodesis plate is intended for the
More informationACCS Anterior Cervical Compression System TECHNIQUE GUIDE
ACCS Anterior Cervical Compression System TECHNIQUE GUIDE Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF ACCS Anterior Cervical Compression System The Anterior
More informationIntegra. Capture Screw System SURGICAL TECHNIQUE
Integra Capture Screw System SURGICAL TECHNIQUE Table of Contents Indications... 2 Contraindications... 2 System Description... 2 System Features... 2 Cannulated Low-Profile Screws (AC-Series) Overview...
More informationFOOTMOTION FOREFOOT. INNOVATION means MOTION. Self-drilling and self-tapping screws Optimal compression Innovative ergonomic instruments
INNOVATION means MOTION FOOTMOTION FOREFOOT SCREWS / PERCUTANEOUS REAMERS / STA PLES Self-drilling and self-tapping screws Optimal compression Innovative ergonomic instruments FO OTMOTION A COMPREHENSIVE
More informationFrom the «BioBall Company» OsteoBridge Family. OsteoBridge Knee Arthrodesis. The modular system for the fusion of the knee joint
From the «BioBall Company» OsteoBridge Family OsteoBridge Knee Arthrodesis The modular system for the fusion of the knee joint OsteoBridge Knee Arthrodesis System 01. OsteoBridge Knee Arthrodesis The OsteoBridge
More informationTable of Contents 2-6. Introduction. Indications Surgical Technique. Ordering Information 15-24
Table of Contents Introduction Product information ExtremiFix Midsize Large Screw Offering Headless Screw Characteristics Design Features & Benefits Instrumentation Technical Details Calibrated Drill Bits
More informationMEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET. for Intramedullary Nail System
MEDICAL ADVANCED TECHNOLOGY EMERGENCY REMOVAL UNIVERSAL EXTRACTION SET for Intramedullary Nail System introducing ourselve Manufacturer of surgical implants and medical devices. Solutions for patient orthopaedic
More informationMATRIX COMBO PLATING SYSTEM. Streamlined set for craniofacial and mandibular trauma and reconstruction
MATRIX COMBO PLATING SYSTEM Streamlined set for craniofacial and mandibular trauma and reconstruction MATRIXCOMBO PLATING SET MATRIXCOMBO PLATING SET (01.503.400) The aim of surgical fracture treatment
More informationVariAx DistalFibula. Foot & Ankle. Locking Plate System. Operative Technique
VariAx DistalFibula Locking Plate System Operative Technique Foot & Ankle Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design VariAx 2 Color Coded Screws and Instruments VariAx
More information3.5 mm/2.7 mm LCP. Pancarpal Arthrodesis Plate. For treatment of carpal joints in dogs
3.5 mm/2.7 mm LCP Pancarpal Arthrodesis Plate For treatment of carpal joints in dogs Plate Design The DePuy Synthes Vet 3.5 mm/2.7 mm LCP Pancarpal Arthrodesis plate is intended for the treatment of hyperextension
More informationFor Minimally Invasive Application of Cerclage Wires. Cerclage Passer. Surgical Technique
For Minimally Invasive Application of Cerclage Wires Cerclage Passer Surgical Technique Table of Contents Introduction Cerclage Passer 2 Surgical Technique Preparation 4 Insert Cerclage Passer 5 Connect
More informationSmall Plate and Screw System SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME Small Plate and Screw System SURGICAL TECHNIQUE Contents Key Design Features 2 Surgical Technique 3 Implants and Instruments 9 Proper surgical procedures and techniques are the responsibility
More information90 SCREWDRIVER Minimally invasive drilling and screw insertion
90 SCREWDRIVER Minimally invasive drilling and screw insertion This publication is not intended for distribution in the USA. SURGICAL TECHNIQUE This description alone does not provide sufficient background
More informationTORNIER MAXLOCK EXTREME. Clavicle Plating System SURGICAL TECHNIQUE
TORNIER MAXLOCK EXTREME Clavicle Plating System SURGICAL TECHNIQUE 2 Table of Contents: Key Design Features...4 Surgical Technique...5 Implants & Instruments...9 3 Key Design Features There are 7 anatomically
More informationDistal Volar Radius Plate Procedure Steps.
Distal Volar Radius Plate Procedure Steps www.carbo-fix.com Introduction The CarboFix Implants The CarboFix Distal Volar Radius Plates are made of numerous continues carbon fibers embedded in polymer (PEEK).
More information5th Metatarsal Fracture System Surgical Technique
5th Metatarsal Fracture System Surgical Technique 5th Metatarsal Fracture System 5th Metatarsal Fracture System The 5th Metatarsal Fracture System (AR-8956S) is a uniquely designed screw and plate system
More informationHumeral Nail System Procedural Steps.
Humeral Nail System Procedural Steps www.carbo-fix.com Table of Contents Introduction..3 Instrumentation Set... 8 Procedural Steps: Humeral Nail.........10 Procedural Steps: Proximal Humeral Nail.....13
More informationVariAx Foot Locking Plate System
VariAx Foot Locking Plate System Operative Technique Trauma and Deformity Correction Polyaxial Locking Technology Comprehensive Calcaneal Fracture Plates Table of Contents 1. Introduction 3 2. Overview
More informationZimmer Natural Nail System
Zimmer Natural Nail System Cephalomedullary Nail Surgical Technique Compact Case - Short Nails Only STANDARD Zimmer Natural Nail System Cephalomedullary Nail Surgical Technique - Standard 1 Zimmer Natural
More information