Three Phase Bridge, 300 A (Power Modules)
|
|
- Dinah Manning
- 6 years ago
- Views:
Transcription
1 MTC Three Phase Bridge, 300 A (Power Modules) S-300MT...C Series FEATURES Blocking voltage up to 1800 High surge capability High thermal conductivity package, electrically insulated case Excellent power volume ratio 3600 RMS isolating voltage UL pending Designed for industrial level Material categorization: for definitions of compliance please see PRODUCT SUMMARY I O 300 A at C RRM 1600 to 1800 Package MTC Circuit Three phase bridge DESCRIPTION A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS ALUES UNITS 258 A I (1) O T C 110 C 50 Hz 2400 I FSM A 60 Hz Hz I 2 t 60 Hz A 2 s I 2 t A 2 s RRM Range 1600 to 1800 T Stg Range -40 to +125 C T J Range -40 to +150 C Note (1) Maximum output current must be limited to 250 A to do not exceed the maximum temperature of terminals ELECTRICAL SPECIFICATIONS OLTAGE RATINGS TYPE NUMBER S-300MT...C OLTAGE CODE RRM, MAXIMUM REPETITIE PEAK REERSE OLTAGE RSM, MAXIMUM NON-REPETITIE PEAK REERSE OLTAGE I RRM MAXIMUM AT T J = MAXIMUM ma 12 Revision: 30-Jun-16 1 Document Number: 95682
2 S-300MT...C Series FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum DC output current at case temperature I O 120 rect. conduction angle 300 A C No voltage 2400 Maximum peak, one-cycle 2512 forward, non-repetitive surge I FSM current % 2018 RRM A Initial 2113 No voltage T J = T J maximum Maximum I 2 t for fusing I 2 t A 2 s % RRM Maximum I 2 t for fusing I 2 t t = 0.1 ms to 10 ms, no voltage reapplied A 2 s Low level value of threshold voltage High level value of threshold voltage Low level value of forward slope resistance High level of forward slope resistance FT(TO)1 (16.7 % x x I F(A) < I < x I F(A) ), T J maximum 0.79 FT(TO)2 (I > x I F(A) ), T J maximum 0.96 r f % x x I F(A) < I < x I F(A) ), T J maximum 3.36 r f2 (I > x I F(A) ), T J maximum 3.22 I pk = 240 A, T J = 25 C, per junction 1.54 Maximum forward voltage drop FM I pk = 300 A, T J = 25 C, per junction 1.7 T RMS isolation voltage J = 25 C, all terminal shorted ISOL 3600 f = 50 Hz, t = 1 s m THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS ALUES UNITS Maximum junction operating T J -40 to +150 C Maximum storage temperature T Stg -40 to +125 Maximum thermal resistance, junction to case Typical thermal resistance, case to heat sink Mounting to heat sink torque ± 15 % R thjc DC operation per junction 0.23 DC operation per module R thcs Per module Mounting surface smooth, flat, and greased 5 A mounting compound is recommended and the torque should Nm to terminal be rechecked after a period of 3 hours to allow for the spread of 5 the compound. Lubricated threads. Approximate weight 235 g 0.03 C/W R CONDUCTION PER JUNCTION SINE HALF WAE CONDUCTION RECTANGULAR WAE CONDUCTION DEICES UNITS S-300MT...C Series C/W Note Table shows the increment of thermal resistance R thjc when devices operate at different conduction angles than DC Revision: 30-Jun-16 2 Document Number: 95682
3 S-300MT...C Series Maximum Allowable Case Temperature ( C) C (Rect.) Total Output Current (A) Instantaneous Forward Current (A) T J = 150 C T J = 25 C Per Junction Instantaneous Forward oltage () Fig. 1 - Current Rating Characteristics Fig. 2 - Forward oltage Drop Characteristics Maximum Total Power Loss (W) T J = 150 C 120 (Rect.) Total Output Current (A) Maximum Total Power Loss (W) R thsa = 0.1 C/W C/W C/W C/W C/W 0.4 C/W C/W 0.7 C/W 0.9 C/W 1.1 C/W C/W Maximum Allowable Ambient Temperature ( C) Fig. 3 - Total Power Loss Characteristics Peak Half Sine Wave Forward current (A) Per Junction At any rated load condition and with rated RRM applied following surge. Initial T J = 150 C at 60 Hz s at 50 Hz 0.0 s 1 10 Number of Equal Amplitude Half Cycle Current Pulses (N) Peak Half Sine Wave Forward Current (A) Maximum non-repetitive surge current vs. pulse drain duration. Initial T J = 150 C No voltage reapplied rated RRM reapplied 700 Per Junction Pulse Train Duration (s) Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current Revision: 30-Jun-16 3 Document Number: 95682
4 S-300MT...C Series Z thjc - Thermal Impedance ( C/W) t 1 - Rectangular Pulse Duration (s) Steady state value R th JC = 0.23 C/W per junction (DC operating) Fig. 6 - Thermal Impedance Z thjc Characteristics ORDERING INFORMATION TABLE Device code S MT 160 C product 2 - Current rating code: 30 = 300 A (average) 3 - Circuit configuration (three phase diodes bridge) 4 - Package indicator 5 - oltage code x 10 = RRM (see oltage Ratings table) CIRCUIT CONFIGURATION + ~ - Dimensions LINKS TO RELATED DOCUMENTS Revision: 30-Jun-16 4 Document Number: 95682
5 Outline Dimensions MTC DIMENSIONS in millimeters Screwing depth max M Ø Revision: 03-Jun-16 1 Document Number: 96003
6 Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 90
Three Phase Bridge, 160 A (Power Modules)
MTC Three Phase Bridge, 160 A (Power Modules) S-160MT...C Series ishay Semiconductors FEATURES Blocking voltage up to 1 High surge capability High thermal conductivity package, electrically insulated case
More informationThree phase bridge. (Power Module), 200 A
Three Phase Bridge (Power Module), 2 A VS-2MT4KPbF MTK PRIMARY CHARACTERISTICS I O 2 A V RRM 4 V Package MTK Circuit configuration Three phase bridge FEATURES Package fully compatible with the industry
More informationMedium Power Silicon Rectifier Diodes, (Stud Version), 12 A
S-1N1...A, S-1N36..A Series Medium Power Silicon Rectifier Diodes, (Stud ersion), 1 A DO-4 (DO-3AA) PRIMARY CHARACTERISTICS I F(A) 1 A Package DO-4 (DO-3AA) Circuit configuration Single FEATURES oltage
More informationPower Rectifier Diodes (T-Modules), 2200 V, 20 A
Power Rectifier Diodes (T-Modules), 2200 V, 20 A FEATURES Electrically isolated base plate 2200 V RRM Industrial standard packaging UL approved file E78996 Simplified mechanical designs, rapid assembly
More informationThree Phase Bridge (Power Modules), 90/110 A
9-MT.KPbF Series MTK Three Phase Bridge (Power Modules), 9/ A FEATURES Package fully compatible with the industry standard INT-A-PAK power modules series High thermal conductivity package, electrically
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A
More informationStandard Diodes (Super MAGN-A-PAK Power Modules), 600 A
Standard Diodes (Super MAGN-A-PAK Power Modules), 6 A FEATURES High current capability High surge capability High voltage ratings up to 2 V 3 V RMS isolating voltage with non-toxic substrate Industrial
More informationStandard Recovery Diodes (Stud Version), 12 A
Standard Recovery Diodes (Stud Version), 12 A VS- FEATURES High surge current capability Stud cathode and stud anode version Wide current range DO-203AA (DO-4) Types up to 1200 V V RRM Designed and qualified
More informationThree Phase Bridge, 130 A to 160 A (Power Modules)
Three Phase Bridge, 3 A to 6 A (Power Modules) VS-3-6MT..KPbF Series PRODUCT SUMMARY I O V RRM Package Circuit MTK 3 A to 6 A 8 V to 6 V MT-K Three phase bridge FEATURES Package fully compatible with the
More informationSingle Phase Rectifier Bridge, 3 A, 6 A
S-, S- Series Single Phase Rectifier Bridge, 3 A, 6 A FEATURES Suitable for printed circuit board or chassis mounting Compact construction High surge current capability Material categorization: for definitions
More informationThree Phase Bridge (Power Modules), 25 A to 35 A
VS26MT, VS Three Phase Bridge (Power Modules), 25 A to 35 A D63 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM V to 6 V Package D63 Circuit configuration Three phase bridge FEATURES Universal, 3 way terminals:
More informationSingle Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
More informationVS-T40HF..., VS-T70HF..., VS-T85HF..., VS-T110HF... Series Power Rectifiers Diodes (T-Modules), 40 A to 110 A
Power Rectifiers Diodes (T-Modules), A to A FEATURES Electrically isolated base plate D-55 (T-module) Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly High surge
More informationThree Phase Bridge (Power Modules), 25 A to 35 A
Three Phase Bridge (Power Modules), 25 A to 35 A D-63 PRODUCT SUMMARY I O 25 A to 35 A V RRM V to 6 V Package D-63 Circuit Three phase bridge FEATURES Universal, 3 way terminals: push-on, wrap around or
More informationSingle phase bridge. (Power Modules), 25 A, 35 A
Single Phase Bridge (Power Modules), 25 A, 35 A GBPC...A GBPC...W PRIMARY CHARACTERISTICS I O 25 A, 35 A V RRM V to V Package GBPC..A, GBPC..W Circuit configuration Single phase bridge FEATURES Universal,
More informationSingle phase bridge. (Power Modules), 25 A / 35 A
Single Phase Bridge (Power Modules), 25 A / 35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 200 V to 1200 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationThree Phase AC Switch (Power Modules), 50 A to 100 A
54-94-4MT..KPbF Series Three Phase AC Switch (Power Modules), 5 A to A MTK PRODUCT SUMMARY I O RRM Package Circuit 5 A to A 8 to 6 MT-K Three phase AC switch FEATURES Package fully compatible with the
More informationStandard Recovery Diodes (Stud Version), 300 A
Standard Recovery Diodes (Stud Version), 300 A DO-205AB (DO-9) PRODUCT SUMMARY I F(AV) 300 A Package DO-205AB (DO-9) Circuit configuration Single diode FEATURES Alloy diode Popular series for rough service
More informationStandard Recovery Diodes (Stud Version), 400 A
Standard Recovery Diodes (Stud Version), 400 A DO-205AB (DO-9) FEATURES Wide current range High surge current capabilities Stud cathode and stud anode version Standard JEDEC types Designed and qualified
More informationSingle phase bridge. (Power Modules), 25 A/35 A
Single Phase Bridge (Power Modules), 25 A/35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 1 V to 1600 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
More informationThyristor/Thyristor, 150 A (INT-A-PAK Power Module)
S-/4PbF Thyristor/Thyristor, 5 A (INT-A-PAK Power Module) INT-A-PAK PRIMARY CHARACTERISTICS I T(A) 5 A Type Modules - thyristor, standard Package INT-A-PAK FEATURES Electrically isolated by DBC ceramic
More informationStandard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A
Standard Recovery Diodes, Generation 2 DO-5 (DO-203AB) (Stud Version), 80 A 80PF(R)... DO-5 (DO-203AB) 80PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability Designed for a wide range of applications
More informationStandard Recovery Diodes, 400 A
VS-VSMD4AW6, VS-VSMD4CW6 Standard Recovery Diodes, 4 A PRIMARY CHARACTERISTICS I F(AV) per module 4 A Type Modules - diode, high voltage Package TO-244 Circuit configuration TO-244 Two diodes common anode,
More informationThyristor/Thyristor (MAGN-A-PAK Power Modules), 320 A
Thyristor/Thyristor (MAGN-A-PAK Power Modules), 32 A MAGN-A-PAK PRIMARY CHARACTERISTICS I T(A) 32 A Type Modules - thyristor, standard Package MAGN-A-PAK FEATURES High voltage Electrically isolated base
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationVS-VSKT91.., VS-VSKH91.., VS-VSKL91.., VS-VSKN91.. Series
AAP Gen 7 (TO-4AA) Power Modules Thyristor/Diode and Thyristor/Thyristor, 95 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified for
More informationStandard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A
VS-95PF(R)...(W) High Voltage Series Standard Recovery Diodes Generation 2 DO-5 (DO-203AB) (Stud Version), 95 A 95PF(R)... DO-5 (DO-203AB) 95PF(R)...W DO-5 (DO-203AB) FEATURES High surge current capability
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-63 FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E3359 approved
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A
VS-80PF(R)...(W) High Voltage Series Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 80 A 80PF(R)... 80PF(R)...W DO-5 (DO-203AB) DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 80 A Package
More informationAAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 105 A
AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 05 A FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Designed and qualified for industrial level
More informationStandard Recovery Diodes, (Stud Version), 200 A
VS- Standard Recovery Diodes, (Stud Version), 200 A DO-30 (DO-205AC) PRIMARY CHARACTERISTICS I F(AV) 200 A Package DO-30 (DO-205AC) Circuit configuration Single FEATURES Wide current range High voltage
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A PRIMARY CHARACTERISTICS I O 1.9 A V RRM 5 V to 1 V Package Circuit configuration Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard
More informationStandard Recovery Diodes, (Stud Version), 300 A
Standard Recovery Diodes, (Stud Version), 300 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 300 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage rating
More informationADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A
ADD-A-PAK Generation II Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/6 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified
More informationVS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A
Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, A FEATURES Low leakage current series Good surge current capability up to 00 A Material categorization: for definitions of compliance please
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Diffused diode High voltage ratings up to
More informationVS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series Standard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(AV) 85 A Package
More informationStandard Recovery Diodes, (Stud Version), 400 A
Standard Recovery Diodes, (Stud Version), 400 A DO-9 (DO-205AB) PRIMARY CHARACTERISTICS I F(AV) 400 A Package DO-9 (DO-205AB) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. ADD-A-PAK Gen 7 Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) A Type Modules - Diode, High Voltage Package ADD-A-PAK Gen 7 Circuit ADD-A-PAK Two
More informationPower Modules, Passivated Assembled Circuit Elements, 25 A
Power Modules, Passivated Assembled Circuit Elements, 25 A VS-P Series FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS
More informationPower Modules, Passivated Assembled Circuit Elements, 40 A
Power Modules, Passivated Assembled Circuit Elements, 4 A FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS I O 4 A Type
More informationVS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A
Power Silicon Rectifier Diodes, (Stud Version), 35 A, 4 A, A FEATURES Low leakage current series Good surge current capability up to A Material categorization: for definitions of compliance please see
More informationInsulated Single Phase Hyperfast Bridge (Power Modules), 60 A
Insulated Single Phase Hyperfast Bridge (Power Modules), 6 A SOT-227 PRIMARY CHARACTERISTICS V RRM 65 V I O at T C = 123 C 6 A t rr 63 ns Type Modules - Bridge, Hyperfast Package SOT-227 Circuit configuration
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-50TPS2L-M3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, 50 A 2 3 TO-247AD 3L PRIMARY CHARACTERISTICS 2 (A) (K) (G) 3 I T(A) 50 A DRM / RRM 200 TM (typ.). I GT (typ.) 40 ma T J -40 C
More informationThree Phase Bridge (Power Module), 45 A to 100 A
40MT1.0P.PbF, 0MT1.0P.PbF, MT1.0P.PbF Series Three Phase Bridge (Power Module), 45 A to A FEATURES Vishay High Power Products MT...PA PRODUCT SUMMARY I O MT...PB 45 A to A Low V F Low profile package Direct
More informationThyristor High Voltage, Phase Control SCR, 50 A
S-TPS2LHM3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, A 2 (A) FEATURES AEC-Q qualified, meets JESD 20 class A whisker test Flexible solution for reliable AC power rectification 2 3
More informationStandard Recovery Diodes (Stud Version), 70 A
Standard Recovery Diodes (Stud Version), 70 A VS- FEATURES High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available DO-203AB
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-2ETS8FP-M3, VS-2ETS2FP-M3 High Voltage, Input Rectifier Diode, 2 A 2 2L TO-22 FullPAK PRIMARY CHARACTERISTICS Cathode 2 Anode I F(AV) 2 A V R 8 V, 2 V V F at I F. V I FSM 3 A T J max. C Package 2L TO-22
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Alloy diode High current carrying capability
More informationFast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
VS-6FL(R), VS-2FL(R), VS-6FL(R) Series Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities
More informationMedium Power Phase Control Thyristors (Stud Version), 16 A
Medium Power Phase Control Thyristors (Stud Version), 16 A VS- PRODUCT SUMMARY TO-208AA (TO-48) Package TO-208AA (TO-48) Diode variation Single SCR I T(AV) 16 A 0 V, 200 V, 400 V, 600 V, 800 V, V DRM /V
More informationThyristor High Voltage, Phase Control SCR, 40 A
S-40TPS2LHM3, S-40TPS2ALHM3 Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) Low I GT parts available AEC-Q0 qualified meets JESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible
More informationADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A
FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Compliant to RoHS directive /95/EC Designed and qualified for industrial level PRODUCT SUMMARY I T(A) or
More informationThyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A
VS- Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A FEATURES High current capability High surge capability Industrial standard package 3000 V RMS isolating voltage with non-toxic substrate Designed
More informationHEXFRED Ultrafast Diodes, 100 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) 2.5 V t rr (typical) 150 ns I F(DC) at T C 110 A at C Package INT-A-PAK Circuit configuration
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-34A FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E359 approved
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationFRED Pt Gen 4 Single Ultrafast Diode, 500 A (INT-A-PAK Power Modules)
FRED Pt Gen 4 Single Ultrafast Diode, 5 A (INT-A-PAK Power Modules) VS-VSKEF5/6PbF INT-A-PAK PRODUCT SUMMARY V R 6 V I F(AV) at T C 5 A at 55 C t rr at 4 ns Type Modules - diode, high voltage Package INT-A-PAK
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationFast Recovery Diodes (Stud Version), 40 A, 70 A, 85 A
VS-4HFL, VS-7HFL, VS-85HFL Series Fast Recovery Diodes (Stud Version), 4 A, 7 A, 85 A FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities Stud cathode
More informationVS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) Type ADD-A-PAK A Modules - Diode, High Voltage MECHANICAL DESCRIPTION
More informationPower Rectifier Diodes (T-Modules), 40 A to 110 A
THF..., THF..., T85HF..., T1HF... Series (T-Modules), A to 1 A FEATURES Electrically isolated base plate D-55 Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly
More informationStandard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available Types up to 400 V V RRM Designed and qualified for industrial
More informationThyristor High Voltage, Phase Control SCR, 40 A
Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) AEC-Q0 qualified meets ESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible solution for reliable AC power rectification Easy control
More informationStandard Recovery Diodes, (Hockey PUK Version), 800 A
Standard Recovery Diodes, (Hockey PUK Version), 8 A VS- A-PUK (DO-AA) PRIMARY CHARACTERISTICS I F(AV) 8 A Package A-PUK (DO-AA) Circuit configuration Single FEATURES Wide current range High voltage ratings
More informationHigh Voltage, Input Rectifier Diode, 10 A
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series High Voltage, Input Rectifier Diode, A TO-22 FULL-PAK PRODUCT SUMMARY Base cathode 3 Cathode Anode Package TO-22FP I F(AV) A V R 8 V to 2 V V F at I F. V I FSM
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules) INT-A-PAK PRIMARY CHARACTERISTICS V R 1200 V V F (typical) at 300 A at 2.18 V t rr (typical) at 45 A 233 ns I F(DC) at T C 300 A at 60 C Package
More informationHigh Performance Schottky Rectifier, 240 A
High Performance Schottky Rectifier, 240 A HALF-PAK (D-67) Lug terminal anode Base cathode FEATURES 175 C T J operation Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationSingle Phase Bridge (Power Modules), 25/35 A
MB Series MB Single Phase Bridge FEATURES Universal, 3 way terminals: Push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume
More informationAAP Gen 7 (TO-240AA) Power Modules Schottky Rectifier, 200 A
AAP Gen 7 (TO-24AA) Power Modules Schottky Rectifier, 2 A AAP Gen 7 (TO-24AA) PRIMARY CHARACTERISTICS I F(AV) 2 A V R 5 V Package AAP Gen 7 (TO-24AA) Circuit configuration Two diodes doubler circuit MECHANICAL
More informationPhase Control Thyristors (Stud Version), 110 A
VS-RKI...PbF, VS-RKI...PbF Series Phase Control Thyristors (Stud Version), A TO-94 (TO-29AC) PRIMARY CHARACTERISTICS I T(AV) A V DRM /V RRM 4 V, 8 V, 2 V V TM.57 V I GT 8 ma T J -4 C to +4 C Package TO-94
More informationPhase Control Thyristor RMS SCRs, 25 A, 35 A
VS-N681, VS-N Series Phase Control Thyristor RMS SCRs, A, 3 A TO-8 (TO-8AA) V DRM /V RRM PRIMARY CHARACTERISTICS I T(AV) 16 A, A I T(RMS) A, 3 A 3 V, V, V, 6 V, 7 V, 8 V, V, V, 1 V, 1 V, V, V, 1 V 1 V
More informationHigh Performance Schottky Rectifier, 100 A
High Performance Schottky Rectifier, A Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R 15 V V F at I F 0.45 V I RM 870 ma at C T J max. 125 C Diode variation Single die E AS 9 mj
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A VS- Series PRODUCT SUMMARY I O V RRM Package Circuit 1.9 A 1 V to 1 V Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard 2.54
More informationPhase Control Thyristors (Stud Version), 300 A
Phase Control Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A 400 V, 800 V, 1200 V, 1600 V, V DRM /V RRM 1800 V, 2000 V V TM 1.28 V I GT 200 ma T J -40 C to +125
More informationInsulated Gen 2 Schottky Rectifier Module, 300 A
VS-QA3FA17 Insulated Gen 2 Schottky Rectifier Module, 3 A PRIMARY CHARACTERISTICS I F(AV) per module at T C = 132 C V R V FM at A, T C = 25 C Package Circuit configuration SOT-227 3 A 17 V.79 V SOT-227
More informationHEXFRED Ultrafast Diodes, 300 A (INT-A-PAK Power Modules)
HEXFRED Ultrafast Diodes, 3 A (INTAPAK Power Modules) VSVSKCU3/6PbF INTAPAK PRIMARY CHARACTERISTICS V R 6 V V F (typical).23 t rr (typical) 3 ns I F(AV) at T C 3 A at 48 C Package INTAPAK Circuit configuration
More informationHigh Performance Schottky Rectifier, 100 A
High Performance Schottky Rectifier, A VS-BGQ030 Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R 30 V V F at I F 0.56 V I RM 460 ma at 25 C T J max. 50 C Diode variation Single die
More informationHigh Performance Schottky Rectifier, 100 A
High Performance Schottky Rectifier, A Cathode Anode PowerTab PRIMARY CHARACTERISTICS I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C E AS 9 mj T J max. 175 C Package PowerTab Circuit configuration
More informationInsulated Ultrafast Rectifier Module, 210 A
Insulated Ultrafast Rectifier Module, 2 A SOT-227 4 2 3 FEATURES Two fully independent diodes Fully insulated package Ultrafast, soft reverse recovery, with high operation junction temperature (T J max.
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationHigh Performance Schottky Rectifier, 400 A
High Performance Schottky Rectifier, 4 A TO-244 Lug terminal anode Lug terminal anode 2 Base common cathode FEATURES 75 C T J operation Center tap module Low forward voltage drop High frequency operation
More informationMT..KB SERIES 60 A 70 A. Power Modules THREE PHASE BRIDGE. Features. Description. Major Ratings and Characteristics. Bulletin I27500 rev.
MT..KB SERIES THREE PHASE BRIDGE Power Modules Features Package fully compatible with the industry standard INT-Apak power modules series High thermal conductivity package, electrically insulated case
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationStandard Recovery Diodes, (Hockey PUK Version), 2100 A
Standard Recovery Diodes, (Hockey PUK Version), 2 A VS-SD2C..L Series B-PUK (DO-2AB) PRIMARY CHARACTERISTICS I F(AV) 2 A Package B-PUK (DO-2AB) Circuit configuration Single FEATURES Wide current range
More informationStandard Recovery Diodes, (Hockey PUK Version), 3000 A
Standard Recovery Diodes, (Hockey PUK Version), 3000 A VS- K-PUK (DO-200AC) PRIMARY CHARACTERISTICS I F(AV) 3000 A Package K-PUK (DO-200AC) Circuit configuration Single FEATURES Wide current range High
More informationInsulated Ultrafast Rectifier Module, 280 A
Insulated Ultrafast Rectifier Module, 280 A SOT-227 PRIMARY CHARACTERISTICS V R 200 V I F(AV) per module at T C = C 280 A t rr 45 ns Type Modules - diode FRED Pt Package SOT-227 FEATURES Two fully independent
More informationPhase Control Thyristors (Stud Version), 110 A
Phase Control Thyristors (Stud Version), 110 A TO-209AC (TO-94) PRODUCT SUMMARY I T(AV) 110 A V DRM /V RRM 400 V, 1600 V V TM 1.52 V I GT 150 ma T J -40 C to 140 C Package TO-209AC (TO-94) Diode variation
More informationInverter Grade Thyristors (Stud Version), 85 A
Inverter Grade Thyristors (Stud Version), 85 A TO-94 (TO-209AC) PRIMARY CHARACTERISTICS Package TO-94 (TO-209AC) Circuit configuration Single SCR I T(AV) 85 A V DRM /V RRM 400 V, 0 V, 0 V, 0 V V TM 2.15
More informationPhase Control Thyristors (Stud Version), 330 A
Phase Control Thyristors (Stud Version), 330 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 330 A 400 V, 800 V, 1200 V, 1400 V, V DRM /V RRM 1600 V, 2000 V V TM 1.52 V I GT 200 ma T J -40 C to +125
More informationStandard Recovery Diodes, (Stud Version), 85 A
Vishay High Power Products Standard Recovery Diodes, FEATURES High surge current capability Stud cathode and stud anode version Leaded version available RoHS COMPLIANT PRODUCT SUMMARY I F(AV) DO-3AB (DO-5)
More informationFast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities Standard JEDEC types Stud cathode
More informationVS-70TPS12PbF, VS-70TPS16PbF High Voltage Series Thyristor High Voltage, Phase Control SCR, 70 A
Thyristor High Voltage, Phase Control SCR, 70 A 2 (A) FEATURES High surge capability High voltage input rectification 2 Designed and qualified according to JEDEC -JESD47 3 Super TO-247 (K) (G) 3 Material
More informationStandard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
More informationInsulated Ultrafast Rectifier Module, 230 A
Insulated Ultrafast Rectifier Module, 23 A SOT-227 PRIMARY CHARACTERISTICS V R 6 V I F(AV) per module at T C = 88 C 23 A t rr 43 ns Type Modules - diode FRED Pt Package SOT-227 FEATURES Two fully independent
More informationHigh Performance Schottky Rectifier, 240 A
High Performance Schottky Rectifier, 240 A HALF-PAK (D-67) PRODUCT SUMMARY I F(AV) V R Package Circuit Lug terminal anode Base cathode 240 A 150 V HALF-PAK (D-67) Single diode FEATURES 175 C T J operation
More informationMedium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
More informationInput Rectifier Diode, 80 A
Input Rectifier Diode, 8 A 8EPS16 High Voltage Series Vishay High Power Products TO-247AC PRODUCT SUMMARY V F at 8 A I FSM V RRM Base cathode 4, 2 1 3 Anode Anode 1.17 V 145 A 16 V DESCRIPTION/FEATURES
More informationFEATURES. Package. PARAMETER SYMBOL PB3506 PB3508 PB3510 UNIT Maximum repetitive peak reverse voltage V RRM V 35 T A = 25 C (2) 4.
PB356, PB358, PB35 Enhanced isocink+ TM Bridge Rectifiers + isocink+ ~ ~ - - ~ ~ + ~ ~ Case Style PB FEATURES UL recognition file number E32394 (QQQX2) UL 557 (see *) Enhanced high-current density single
More information