Features. Output Power: 2 dbm Typical Spurious Suppression: >20 dbc SSB Phase Noise: khz Offset Test Instrumentation
|
|
- Dale Summers
- 5 years ago
- Views:
Transcription
1 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Features Output Power: dbm Typical Spurious Suppression: > dbc SSB Phase Noise: khz Offset Test Instrumentation Single Supply: V@ 91 ma 16 Lead 3x3 mm SMT Package: 9mm² Functional Diagram General Description Electrical Specifications, T A = + C, Vcc = V [1] [1] operation Single-ended The is an active x4 frequency multiplier housed in a 3x3 mm leadless QFN surface mount package. Power output is dbm typical from a single +V supply and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and spurious is dbc typical with respect to output signal level. The low additive SSB phase noise of -148 dbc/hz at 1 khz offset helps the user maintain good system noise performance. The is ideal for use in LO multiplier chains allowing reduced parts count versus traditional approaches. Parameter Min. Typ. Max. Units Frequency Range, Input GHz Frequency Range, Output 6-1 GHz Input Power Range 1 dbm Output Power Range dbm Spurious - dbc Input Return Loss 7 db Output Return Loss 1 db SSB Phase Noise (1 khz Offset) Pin = + dbm -148 dbc/hz Supply Current (Icc) 91 ma - 1 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com
2 Output Power vs. dbm Drive Level [1] 4 Output Power vs. Drive Level, T = C [1] 4 OUTPUT POWER (dbm) C +8C -4C OUTPUT FREQUENCY (GHz) Output Power vs. Supply dbm Drive Level, T = C [1] OUTPUT POWER (dbm) V.V.V OUTPUT FREQUENCY (GHz) Input Return Loss vs. Temperature [1] RETURN LOSS (db) C +8C -4C OUTPUT POWER (dbm) dbm dbm 1 dbm OUTPUT FREQUENCY (GHz) Spurious Output vs. Fin Pin = + dbm, T = C [1] OUTPUT LEVEL (dbm) rst Harmonic nd Harmonic 3rd Harmonic 4th Harmonic th Harmonic 6th Harmonic INPUT FREQUENCY (GHz) Output Return Loss vs. Temperature [1] RETURN LOSS (db) C +8C -4C FREQUENCY (GHz) FREQUENCY (GHz) [1] All data shown is single-ended operation Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com -
3 SSB Phase Noise vs. Pin Fout = 8 GHz, T = C [1] Icc vs. Temperature [1] -1 1 SSB PHASE NOISE (dbc/hz) -13 dbm dbm 1 dbm e+ 1.e+3 1.e+4 1.e+ 1.e+6 1.e+7 OFFSET FREQUENCY (Hz) Absolute Maximum Ratings Reliability Information RF Input (Vcc = +V) + dbm Junction Temperature To Maintain Vcc +6V 1 Million Hour MTTF Storage Temperature -6 to +1 C Nominal Junction Temperature (T = 8 C) ESD Sensitivity (HBM) 1V Thermal Resistance (Junction to GND paddle, V supply) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS OPERATING CURRENT (ma) +C 9 +8C -4C Vcc (V) 1 C 11.4 C 3.4 C/W Operating Temperature -4 C to + 8 C [1] All data shown is single-ended operation - 3 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com
4 Outline Drawing Package Information NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE.1mm MAXIMUM. PAD BURR HEIGHT SHALL BE.mm MAXIMUM.. PACKAGE WARP SHALL NOT EXCEED.mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Part Number Package Body Material Lead Finish MSL Rating Package Marking [1] [] 917 RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] 4-Digit lot number XXXX [] Max peak reflow temperature of 6 C Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 4
5 Pin Description Pin Number Function Description Interface Schematic 1, 4-9, 1, 13, 1, 16 GND RFNIN (or GND) These pins and exposed paddle must be connected to RF/DC ground. This pin is AC coupled and matched to ohms, and is 18 out of phase with pin 3 for differential operation. RF/DC ground for single ended operation. 3 RFIN This pin is AC coupled and matched to ohms 1 RFOUT This pin is AC coupled and matched to ohms 11 RFNOUT This pin is AC coupled and matched to ohms, and is 18 out of phase with pin 1 for differential operation. Terminate in ohms for single ended operation. 14 Vcc Supply voltage +V - Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com
6 Evaluation PCB List of Materials for Evaluation PCB [1] Item J1 - J3 Description J4, J DC Pin C1 C C3 U1 PCB [] PCB Mount SMA Connector 1 pf Capacitor, 4 Pkg. 1 pf Capacitor, 4 Pkg. 4.7 µf Capacitor, 4 Pkg. x4 Active Multiplier 187 Eval Board The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers 43 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com - 6
Features OBSOLETE. = +25 C, Vcc= 5V [1]
v.41 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Functional Diagram Electrical Specifications, T A = + C, Vcc= V [1] Features Output
More informationHMC695LP4 / HMC695LP4E
v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationTEL: FAX: HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT Evalua
TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, 9.8-11.2 GHz OUTPUT Pin Description Pin Number Function Description Interface
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +5V
v5.1211 Typical Applications Prescaler for DC to 18 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Military Functional Diagram Features Ultra Low ssb Phase
More informationFeatures OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V
v3.121.1-15 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1, 2,, 8) Typical Applications The is ideal for: Satellite Communication Systems Point-to-Point & Point-to-Multi-Point Radios Military Applications Test
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram Features Dual Output:
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
v4.11 HMC5LP5 / 5LP5E OUTPUT 7.3 -.2 GHz Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationFeatures. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationHMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description
v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationFeatures OBSOLETE. = +25 C, 50 Ohm system, Vdd = +5V. Parameter Frequency Min. Typ. Max. Units GHz
Typical Applications v.91 ATTENUATOR,.5-6. GHz Features The is ideal for: Point-to-Point Radio Cellular/3G & WiMAX/4G Infrastructure Test Instrumentation Microwave Sensors Military, ECM & Radar Functional
More informationFeatures. = +25 C, 50 Ohm system
v6.312 Typical Applications Features The E is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram Wide Bandwidth: 5-26.5 GHz Excellent
More informationHMC437MS8G / 437MS8GE
v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator
More informationOBSOLETE HMC881LP5E FILTERS - TUNABLE - SMT. FILTER - TUNABLE, LOW PASS SMT GHz. Typical Applications. General Description. Functional Diagram
Typical Applications The is ideal for: Test & Measurement Equipment Military RADAR & EW/ECM SATCOM & Space Industrial & Medical Equipment Functional Diagram v1.11 Electrical Specifications, T A = +25 C
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz
Typical Applications Low noise MMIC VCO w/divide-by-16 for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Automotive Radar Features Pout: + dbm Phase
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationOBSOLETE HMC894LP5E FILTERS - TUNABLE - SMT. FILTER - TUNABLE, BAND PASS SMT GHz. Typical Applications. General Description
Typical Applications The is ideal for: Test & Measurement Equipment Military RADAR & EW/ECM SATCOM & Space Industrial & Medical Equipment Functional Diagram v.11 Features General Description Fast Tuning
More information= +25 C, Vcc = +3.3V, Z o = 50Ω (Continued)
v1.1 HMC9LP3E Typical Applications The HMC9LP3E is ideal for: LO Generation with Low Noise Floor Software Defined Radios Clock Generators Fast Switching Synthesizers Military Applications Test Equipment
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
HMC54LP5 / 54LP5E Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationHMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.9 HMCLPE AMPLIFIER (SDLVA),.5-8.5 GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: Wireless Local Loop (WLL) VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +4.9 dbm Phase Noise: -3 dbc/hz
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationFeatures. = +25 C, Vcc1, Vcc2 = +3V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Prescaler for
More information= +25 C, With Vee = -5V & VCTL= 0/-5V
v.3.5db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave & VSAT Radios Military & Space Test Instrumentation
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationFeatures. = +25 C, Vcc = +5V, Z o = 50Ω, Bias1 = GND
v1.612 Typical Applications The is ideal for: LO Generation with Low Noise Floor Clock Generators Mixer LO Drive Military Applications Test Equipment Sensors Functional Diagram Features Low Noise Floor:
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationFeatures. = +25 C, Vcc(RF), Vcc(DIG) = +5V
& DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Programmable divider for offset synthesizer and variable divide by N applications: Satellite Communication Systems Point-to-Point and Point-to-Multi-Point Radios LMDS SONET Functional
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v5.121 HMC32 / 32E Typical Applications Prescaler for DC to C band PLL applications:
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC652LP2E
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4
.6-10.2 GHz Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo
More informationHMC705LP4 / HMC705LP4E
Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment Functional Diagram Ultra Low
More informationFrequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.
Typical Applications The HMC736LP4(E) is ideal for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/2 = 7.25-7.5
More informationFeatures. = +25 C, Vcc = +3.3V, Z o = 50Ω
Typical Applications The is ideal for: LO Generation with Low Noise Floor Software Defined Radios Clock Generators Fast Switching Synthesizers Military Applications Test Equipment Sensors Functional Diagram
More informationv3.99 Attenuation vs. Frequency over Vctrl V -1.6 V -.6 V. V Attenuation vs. Vctrl1 Over 1 GHz, Vctrl2
5 TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com Typical Applications v3.99 Features The is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar
More informationFeatures db
v1.19 DETECTOR / CONTROLLER, 5-8 MHz Power Detectors - SMT Typical Applications The is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength
More informationFeatures. = +25 C, Vcc = +5V [1]
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
More informationOBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State)
v.1212.5 db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment and Sensors Functional
More informationv Features = +25 C, 50 Ohm System, Vcc = 5V
Typical Applications Prescaler for DC to X band PLL applications: Satellite communication systems Fiber optic Point-to-point and point-to-multi-point radios VSAT Functional Diagram Features Ultra low SSB
More informationHMC705LP4 / HMC705LP4E
HMC75LP4 / HMC75LP4E v4.212 Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationFeatures. = +25 C, Vcc = +5V
Typical Applications Low noise wideband MMIC VCO for applications such as: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
v5.94 HMC66LPE DETECTOR, 8 - GHz Typical Applications The HMC66LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationOBSOLETE. = +25 C, With Vdd = +5V & Vctl = 0/+5V. Parameter Frequency Min. Typ. Max. Units DC - 4 GHz GHz Attenuation Range DC - 10 GHz 10 db
Typical Applications The HMC8LP3E is ideal for: Test Equipment and Sensors ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Cellular Infrastructure Functional Diagram HMC8LP3E v.11 1 GaAs MMIC 1-BIT
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E
More informationFeatures. = +25 C, VDD = +5 V, 0 dbm Drive Level [1]
Typical Applications Features The HMC196LP3E is suitable for: Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram High Output Power: 12 dbm Low Input Power Drive: -2 to
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationFrequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F
Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55
More information= +25 C, 50 Ohm System, Vdd = +5V
v3.69 HMC68LP4 / 68LP4E VARIABLE GAIN AMPLIFIER, 3-4 MHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68lp4(E) is ideal for: Cellular/3G Infrastructure WiBro / WimaX / 4G Microwave
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.41 Typical Applications The HMC649ALP6E
More informationHMC656LP2E TO HMC658LP2E v
Typical Applications The HMC656LP2E - HMC65LP2E are ideal for: Fiber Optics Microwave Radio Military & Space Test & Measurement Scientifi c Instruments RF / Microwave Circuit Prototyping Features 3 Attenuator
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Low noise wideband
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC GHz 31.5 db
v..5 LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: 3G Infrastructure & access points Cellular/3G, LTE & UMB WiMAX, WiBN & Fixed Wireless Test Equipment and Sensors GSM, WCDMA & TD-SCDMA
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationFeatures. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*
v4.1 Typical Applications The HMC685LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm 8 db Conversion
More informationFeatures. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz
v2.1 DIVIDE-BY-, DC - 13 GHz Typical Applications Prescaler for DC to Ku Band PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationHMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth
More informationFeatures. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC688LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm Low Conversion Loss:
More informationFeatures. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 13 db
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Hybrids Test Instrumentation SATCOM & Sensors Functional Diagram Features Broadband Performance: DC
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationFeatures. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC689LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32 dbm Low Conversion Loss:
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Prescaler for 1 MHz to 13 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low ssb
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More information7 GHz INTEGER N SYNTHESIZER CONTINUOUS (N = ), NON-CONTINUOUS (N = 16-54) Features
HMC99LP5 / 99LP5E CONTINUOUS (N = 5-519), NON-CONTINUOUS (N = 1-54) Typical Applications The HMC99LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet
More informationFeatures OBSOLETE. LO Port Return Loss db RF Port Return Loss db
v4.18 MODULATOR RFIC, - 4 MHz Typical Applications The HMC497LP4(E) is ideal for: UMTS, GSM or CDMA Basestations Fixed Wireless or WLL ISM Transceivers, 9 & 24 MHz GMSK, QPSK, QAM, SSB Modulators Functional
More information= +25 C, Vcc1 = Vcc2 = Vcc3 = +5V
v1.19 DC - 7 MHz, 1 kohm Typical Applications The is ideal for: Laser Sensor FDDI Receiver CATV FM Analog Receiver Wideband Gain Block Low Noise RF Applications Features 1 kohm Transimpedance Very Low
More informationHMC540SLP3E v db LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, GHz
HMC54SLP3E v.95 LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR,. - 8 GHz Typical Applications Features The HMC54SLP3E is ideal for both RF and IF applications: Cellular Infrastructure Wireless
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
More informationFeatures. Pout: +9 dbm. Parameter Min. Typ. Max. Units
Typical Applications Phase-Locked Oscillator for: SAT Radio Point-to-Point & Point-to-Multi-Point Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram Features Pout: +9 dbm Phase
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:
More informationHMC913LC4B. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v5.64 HMC93LC4B AMPLIFIER (SDLVA),.6 - GHz Typical Applications The HMC93LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control
More information