Lathe Tool Holders. Catalog Number Gage Insert H B H1 L F L1 Shim Options Right Hand Left Hand Shank. Shank Width ±.15. Height ±.10. Shank Width ±.

Size: px

Start display at page:

Download "Lathe Tool Holders. Catalog Number Gage Insert H B H1 L F L1 Shim Options Right Hand Left Hand Shank. Shank Width ±.15. Height ±.10. Shank Width ±."

Scot Lamb
5 years ago
Views:

operations if needed are relatively light. Our GWLNR/L is recommended where heavy facing is required.

1 Lathe Tool Holders U.S. Patent 0 other US & foreign patents pending Specifications are subject to change without notice DWLNR/L - WNMG, 0 Trigon This tool is designed for primarily turning applications where facing operations if needed are relatively light. Our GWLNR/L is recommended where heavy facing is required. Metric Sizes Dimensions in Millimeters Catalog Number Gage Insert H B H L F L Shim Options Right Hand Left Hand Shank ±.0 Shank Width ±. Insert ±.0 Overall ±.0 Tip Offset ±.0 ±. Coolant Parts List DWLNR-0K-0 DWLNL-0K-0 WNMG IWSN- CHM-00 PLM-00 DWLNR-M-0 DWLNL-M-0 WNMG IWSN- CHM-00 PLM-00 DWLNR-P-0 DWLNL-P-0 WNMG IWSN- CHM-00 PLM-00 Normally Stocked Special Order Inch Sizes Dimensions in Inches Catalog Number Gage Insert H B H L F L Shim Options Right Hand Left Hand Shank ±..00 Shank Width ±.00 Insert ±.00 Overall ±.00 Tip Offset ±.00 ±.00 Coolant Parts List DWLNR-B DWLNL-B WNMG IWSN- CHE-00 PLE-00 DWLNR-C DWLNL-C WNMG IWSN- CHE-00 PLE-00 DWLNR-B DWLNL-B WNMG IWSN- CHE-00 PLE-00 DWLNR-C DWLNL-C WNMG IWSN- CHE-00 PLE-00 DWLNR-D DWLNL-D WNMG IWSN- CHE-00 PLE-00 DWLNR-0D DWLNL-0D WNMG IWSN- CHE-00 PLE-00 DWLNR-D DWLNL-D WNMG IWSN- CHE-00 PLE-00 Normally Stocked Special Order Revised /0/0

2 Test Data U.S. Patent 0 other US & foreign patents pending Specifications are subject to change without notice DWLNR/L Insert Repeatability This test shows the insert repeatability of the Click Change tool holder. The test is performed using a standard gauge insert in a metrology environment. The insert is manually removed and manually replaced for each reading using the same insert tip. Each measurement is recorded in the table below for each of the three axes. A standard production Click Change tool holder is used for the test, and similar results may be expected using any production tool. Measurements are taken with a Mititoyo Digimatic Indicator model ID-F, and recorded to a resolution of The gauge R&R error is +/ Repeatability Test Results (inches) Measurement Data (inches) Width Avg. Value Std. Deviation Maximum Val Minimum Val Total Insert Repeatability <.000 <.000 <.00 <.00 mm. No. Width DWLNR/L Machining Test Cuts These examples show some actual test cutting conditions for the Click Change Tool Holder. They are not intended to show the limits of the tool. The important measurements here are the depth of cut, the feed rate, and the material being cut. These three parameters determine the cutting forces that the tool holder will see. Increasing the cutting speed, will require more horsepower, but has little or no effect on the forces seen by the insert or the tool holder. In general, it is the machine rigidity, the insert composition and coating, and the coolant type and delivery method that limit the metal removal rate. The tool holder is not usually the Weak Link. Material Feed Rate Depth of Cut Diameter Speed RPM Test Test Stainless Inconel.00 in. 0. mm.00 in. 0. mm.00 in.. mm.00 in..0 mm.0 in.. mm. in.. mm 0 SF/M M/M SF/M. M/M 0 0 Revised //0

4 List U.S. Patent 0 other US & foreign patents pending Specifications are subject to change without notice DWLNR/L WNMG - 0 Trigon This tool is designed for primarily turning applications where facing operations if needed are relatively light. Our GWLNR/L is recommended where heavy facing is required. All prices are in US Dollars Metric Tool Holders Metric Parts Tool Holder Catalog Number Accessories & Parts (Applies to all sizes) Right Hand Left Hand List Weight (Lbs.) Description Part Number DWLNR-0K-0 DWLNL-0K-0 $.0 0. Coolant CHM-00 $.00 DWLNR-M-0 DWLNL-M-0 $.0. Shim Kit SK-WNMG-M $.0 DWLNR-P-0 DWLNL-P-0 $.0.(est) Clamp Kit (RH) CK-WNMG-RM $.0 Clamp Kit (LH) CK-WNMG-LM $.0 Cam Rod Kit RK-00 $. Inch Tool Holders Inch Parts Tool Holder Catalog Number Accessories & Parts (Applies to all sizes) Right Hand Left Hand List Weight (Lbs.) Description Part Number DWLNR-B DWLNL-B $.0 0. Coolant CHE-00 $.00 DWLNR-C DWLNL-C $.0 0. Shim Kit SK-WNMG- $.0 DWLNR-B DWLNL-B $.0. Clamp Kit (RH) CK-WNMG-R $.0 DWLNR-C DWLNL-C $.0. Clamp Kit (LH) CK-WNMG-L $.0 DWLNR-D DWLNL-D $.0. Cam Rod Kit RK-00 $. DWLNR-0D DWLNL-0D $.0. DWLNR-D DWLNL-D $.0 Revised /0/0

5 DWLNR-C 0 Width GWLNR-C 0 Width DCLNR-C 0 Width

6 DVJNR-C 0 Width DDJNR-C 0 Width

NPA. New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge. New Product Announcement

NPA. New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge. New Product Announcement NPA New Product Announcement Page 1 / 10 New Tool Holder with 3 Inlets for Coolant New Tools with Rigid Clamp/Nozzle for Through-Coolant Directed to the Cutting Edge Page 2 / 10 Highlights ISCAR is expanding