TOOL GUIDE 2017 METRIC TURNING & BORING MILLING. KNURLING TOOLS Call: Visit:

Transcription

1 TURNING & BORING MILLING TOOL GUIDE for everyday machining 2017 METRIC KNURLING TOOLS Call: Visit: 1

2 CARBIDE INSERTS & TURNING TOOLS Technology, Quality & Performance will Turn Machining into PROIT! 1 Call: Visit: sales@doriantool.com

3 Grades 1 If inserts wear, reduce Spindle Speed RPM (n) increase eed (fn) or change to a harder insert grade. 2 If inserts chip, increase Spindle Speed (n), decrease eed (fn), or change to tougher insert grade. 3 or uninterrupted, continuous cuts, use hard and wear resistant insert. 4 or forgings, castings and interrupted cuts, use tough and impact resistant insert with larger nose radius. DPP30GT General Purpose for Alloy Steels. Second choice for Stainless Steels P30 (P15-P35) Substrate Thermal deformation and abrasion resistant substrate with PVD TiN DPC15HT or high speed turning of Alloy Steels, up to V c Most wear resistant steel grade Second choice for machining cast irons Second choice for finishing operation on Duplex, 316 and 316L (positive geometries only) P15 (P10-P25) ine Grain Substrate (1600 Vickers) Not for interrupted cuts CVD Al2O3/TiN/TiCN/Alpha Al2O3/Nano-TiCN/MT-TiCN/TiN Nanolock Coating Technology (22 microns) DPC25UT Universal Turning Grade for Alloy Steels and easy to machine Stainless Steels (316, 316L) Medium Cutting Speeds, ideally at V c or light interrupted and continuous cuts P25 (P15-P35) Substrate (1550 Vickers) CVD Al2O3/TiN/TiCN/Alpha-Al2O3/Nano-TiCN/MT-TiCN/TiN Nanolock Coating Technology (22 microns) DPC35RT or heavily interrupted cuts, forgings, castings and uneven surfaces Tough and impact resistant substrate Slow cutting speeds, ideally at V c P40 (P25-P40) Substrate (1450 Vickers) or Steels and Stainless Steels CVD TiN/Al2O3/TiCN Nanolock Technology Coating DMC20HT High Performance Machining of austenitic stainless steels at higher SM M20 (M10-M25) Substrate Not for interrupted cuts High cutting speeds, ideally at V c Nanolock black MT-CVD Al2O3/TiCN/TiN DMC30UT Tougher alternative to DMC20UT grade for stainless steels General Purpose for interrupted and continuous cuts or medium cutting speeds, ideally at V c M30 (M25-M40) Substrate (1475 Vickers) CVD TiN/TiCN/TiN Coating DKU10HT Wear and abrasion resistant, uncoated substrate Not for interrupted cuts K10 Substrate or hardened materials, and abrasive materials or very fine cuts DNU10GT Uncoated, high wear resistant grade for aluminum, non-ferrous metals and plastics K10 (K05-K15) Substrate DNU25GT Uncoated, high wear resistant grade for aluminum, non-ferrous metals and plastics K25 Micrograin Substrate or continuous and light interrupted cuts DNX10UT Coated version of DNU10GT High wear resistant grade for machining aluminum, non-ferrous metals and plastics Micro-pulse Plasma TiAlN coating, ideal for finish machining (fine cuts) of stainless steels and high temp alloys DNP25GT Universal grade for high temp alloys, aluminum, non-ferrous and ferrous materials S25 Substrate with PVD TiN Coating Not for interrupted cuts DSP10HT or Titanium and Titanium Alloys (unalloyed Ti, alpha-alloys, alpha-beta alloys, beta-alloys) S10 Substrate (1700 Vickers) with CVD TiB2/TiN coating or cutting speeds V c DSP15HT Hardest grade for High Temp Alloys Medium to rough machining of high temp alloys and finish machining of stainless steels With SER chip-breaker, also suitable for Interrupted machining of high temp alloys With SE & SEM chip-breakers, also use on aluminum, non-ferrous metals and plastics Sub micron K30 Substrate with 3 micron PVD Super-Nitride AlTiN Coating DSP20HT Tougher alternative to DSP15HT grade or high temp alloys Inconel 718, Inconel 625, Nimonic, Udimet, Hastelloy, Waspaloy Submicron S20 Substrate (1700 Vickers) with 8 micron PVD AlTiN coating or cutting speeds V c DUP15VT Hard & wear resistant for high temp alloys, aluminum, non-ferrous and ferrous materials S15 Substrate with PVD AlCrN Coating Not for interrupted cuts DUP25GT Universal grade for high temp alloys, aluminum, non-ferrous and ferrous materials S25 Substrate with PVD TiAlN/WC/C Coating Not for interrupted cuts DKC10UT Most wear resistant substrate for Nodular, Ductile and Gray Cast Irons and Hardened Steels K10 (K05-K15) Substrate (1700 Vickers) Up to 396 V c on Gray Cast Iron (GG) or high cutting speeds, 305 V c and above TAG-Turbo CVD Al2O3/TiC/TiCN/TiN Coating with special adhesion interlocking layer or uninterrupted cuts DKC15RT Tougher alternative to DKC10UT, for cast irons Optimal grade for Nodular Cast Iron (GG) and Gray Cast Iron (GGG) K15 (K10-K20) Substrate (1600 Vickers) CVD Al2O3/TiC/TiCN/TiN Coating Suitable for interrupted cuts in cast irons Call: Visit: sales@doriantool.com 2

4 Steel Chip Breakers PE inishing Depth of Cut Min: 0,10mm Max: 2,00mm eed Rate Min: 0,05mm/rev Max: 0,20mm/rev Small chip-breaker for finishing applications. Very light honed, sharp cutting edge. Optimum chip breaking achieved at small depth of cuts and small feed rates. UEM Precision inishing to Light Roughing Depth of Cut Min: 0,50mm Max: 4,00mm eed Rate Min: 0,07mm/rev Max: 0,33mm/rev Small-Medium (intermediate) chip-breaker for both finishing and medium applications. Small honed, relatively sharp cutting edge, positive rake ensures lower cutting pressure than PEM chip breaker for boring applications. Optimum chip breaking achieved at small-medium depth of cut and small-medium feed rates. PEM Light Roughing to inishing Depth of Cut Min: 0,80mm Max: 5,00mm eed Rate Min: 0,15mm/rev Max: 0,40mm/rev Medium chip-breaker for finishing, medium and roughing applications. Medium honed, safe cutting edge for most cutting conditions with a wide range of depth of cut and feed rates. Most general purpose chip breaker for alloy steels. PEU Chip Breaker Depth of Cut Min: 0,50mm Max: 4,00mm eed Rate Min: 0,07mm/rev Max: 0,33mm/rev Small-Medium chip breaker for finishing and medium applications. Small honed, relatively sharp cutting edge on 11 degree positive inserts for alloy steels and stainless steel materials PER Roughing Depth of Cut Min: 1,20mm Max: 8,00mm eed Rate Min: 0,33mm/rev Max: 0,76mm/rev Large chip breaker for roughing and heavy roughing applications. Large honed, strong cutting edge for large depth of cuts and heavy feed rates allows for high material removal rates. Strong cutting edge ideal for interrupted cuts. PEX Wiper Depth of Cut Min: 1,50mm Max: 4,00mm eed Rate Min: 0,20mm/rev Max: 0,78mm/rev Wiper nose with varying nose radii for better surface finish or higher feed rates, preferably on alloy steel materials. PSH & PSS Roughing Depth of Cut Min: 2,00mm Max: 12,5mm eed Rate Min: 0,40mm/rev Max: 1,60mm/rev Large chip breaker for heavy roughing on single sided (flat bottom) negative inserts. lat bottom of the insert provides the most rigid clamping due to maximum surface are on the tool-holder s insert pocket. Positive rake, negative land and heavily honed cutting edge for heavy roughing applications with large depth of cut and high feed rate (very high material removal rate). or continuous, varying and interrupted cuts. PSS chip breaker also suitable for heavy duty roughing of cast irons. PST Extra Heavy Roughing Depth of Cut Min: 2,50mm Max: 12,5mm eed Rate Min: 0,78mm/rev Max: 1,60mm/rev Large chip breaker and very strong cutting edge for extra heavy duty roughing on single sided (flat bottom) negative inserts. lat bottom of the insert provides the most rigid clamping due to maximum surface are on the tool-holder s insert pocket. Positive rake, negative land and heavily honed cutting edge for extra heavy duty roughing applications with large depth of cut and very high feed rate (very high material removal rate). or continuous, varying and interrupted cuts. UEXR/UEXL High Performance Chip Breaker Depth of Cut Min: 1,00mm Max: 3,20mm eed Rate Min: 0,20mm/rev Max: 0,45mm/rev High positive and large scoop chip breaker allows free flowing chips with minimal cutting tool pressure. Ideal for boring applications or whenever chatter is a problem. The precise ground periphery, sharp cutting edge and deep chip channel makes this insert perfect on thin walled tubes or long, slender parts or deep bores. Also, use this insert on applications where chip breaking and chip control is a problem. Directional chip breaker (right hand left hand), not good for facing. UEN Chip Breaker Depth of Cut Min: 0,07mm Max: 4,00mm eed Rate Min: 0,07mm/rev Max: 0,40mm/rev General purpose, very light honed, positive cutting edge for finishing and general purpose machining of various materials. Stainless Steel Chip Breakers ME inishing Depth of Cut Min: 0,50mm Max: 4,00mm eed Rate Min: 0,10mm/rev Max: 0,33mm/rev Small chip-breaker for finishing applications. Very light honed, sharp cutting edge allows machining without work hardening on austenitic or precipitation hardening stainless steels. Optimum chip breaking achieved at small depth of cuts and small feed rates. MEH High Performance Depth of Cut Min: 1,00mm Max: 4,00mm eed Rate Min: 0,17mm/rev Max: 0,43mm/rev Newly developed, high-performance chip breaker for finishing, medium and roughing applications. Sharp, positive edge prevents work hardening; ideal for stainless steels. Innovative Chip- Impact-Protector design prevents chip-damage to the cutting when machining up to shoulders. MEM Medium Depth of Cut Min: 1,20mm Max: 5,50mm eed Rate Min: 0,15mm/rev Max: 0,40mm/rev Medium, general purpose chip-breaker for finishing, medium and roughing applications. Sharp, positive edge prevents work hardening; ideal for stainless steels. MER Roughing Depth of Cut Min: 1,20mm Max: 7,80mm eed Rate Min: 0,33mm/rev Max: 0,78mm/rev Roughing chip-breaker for stainless steels for heavy material removal rate. Relatively sharp but strong cutting edge for large depth of cut and high feed rate. Use for interrupted cuts or heavy machining of stainless steels with heavy feed. UER / UEL Chip Breaker Depth of Cut Min: 0,05mm Max: 1,00mm eed Rate Min: 0,05mm/rev Max: 0,20mm/rev High positive and very sharp cutting edge with small chip breaker allows free cutting and chip breaking with small depth of cut and small feed rates. Ideal for boring applications or whenever chatter is a problem. The precise ground periphery, and sharp cutting edge makes this insert perfect on thin walled tubes or small, long and slender parts, or deep small bores. Also, use this insert on applications where chip breaking and chip control is a problem due to very small feed rates. Directional chip breaker (right hand left hand), not good for facing. High Temp Alloy Chip Breakers SE inishing Depth of Cut Min: 0,50mm Max: 4,00mm eed Rate Min: 0,07mm/rev Max: 0,25mm/rev Precision ground periphery with small, upsharp cutting edge and small chip breaker. Ideal for finishing applications on high temp alloys. Also use on aluminum and non-ferrous materials. SEH High Performance Depth of Cut Min: 1,00mm Max: 3,50mm eed Rate Min: 0,07/rev Max: 0,45mm/rev High Performance, sharp cutting edge with medium chip breaker and high edge security, ideal for medium and rough machining of high temp alloys and titanium alloys. SEM inishing to Light Roughing Depth of Cut Min: 1,00mm Max: 3,50mm eed Rate Min: 0,10mm/rev Max: 0,33mm/rev Upsharp cutting edge with medium chip breaker, ideal for finishing, medium and light roughing of high temp alloys. Also use on aluminum and non-ferrous materials. SER Roughing Depth of Cut Min: 1,20mm Max: 6,00mm eed Rate Min: 0,15mm/rev Max: 0,40mm/rev Sharp cutting edge with large chip breaker, ideal for rough machining of high temp alloys with higher depth of cut and feed rate. Cast Iron Chip Breakers KE inishing Depth of Cut Min: 0,10mm Max: 2,00mm eed Rate Min: 0,50mm/rev Max: 0,30mm/rev Small chip-breaker for finishing applications. Very light honed, sharp cutting edge. Optimum chip breaking achieved at small depth of cuts and small feed rates. KEU Medium lat top, no chip breaker, ideal for cast irons. General purpose. KEM Medium Depth of Cut Min: 0,20mm Max: 3,20mm eed Rate Min: 0,50mm/rev Max: 0,30mm/rev Medium chip-breaker for finishing, medium and light roughing applications on cast irons. KER Roughing Depth of Cut Min: 0,80mm Max: 12,0mm eed Rate Min: 0,30mm/rev Max: 0,60mm/rev Large chip-breaker with a strong cutting edge for medium to rough machining of cast irons at large depth of cut and heavy feeds. Also use for interrupted cuts. NU High Performance Chip Breaker Depth of Cut Min: 1,00mm Max: 8,00mm eed Rate Min: 0,07mm/rev Max: 0,99mm/rev Very upsharp, high positive, precision ground and polished cutting edge for aluminum, non-ferrous metals and plastics. Use for finishing, medium or rough machining of aluminums, non-ferrous metals and plastics. Large, ridged chip breaker alloys free flow evacuation of chips with little cutting pressure. Also, use for very fine cuts with small feed rate on stainless steels and high temp alloys for superb surface finish. UEU High Performance Chip Breaker Depth of Cut Min: 0,50mm Max: 1,00mm eed Rate Min: 0,50mm/rev Max: 0,20mm/rev Precision ground periphery and positive, sharp cutting edge with small chip breaker. Best for finishing and medium machining of various materials. 3 Call: Visit: sales@doriantool.com

5 Negative s Material Application Chip Breaker Grade V c a p Depth of Cut f n eed Rate Harder Tougher Meters per minute mm mm per Rev inishing PE DPC15HT DPC25UT ,10mm - 2,0mm 0,05mm - 0,20mm DPC15HT Medium PEM DPC25UT ,80mm - 5,0mm 0,15mm - 0,40mm DPC35RT DPC15HT Roughing PER DPC25UT ,20mm - 8,00mm 0,33mm - 0,76mm DPC35RT P Steel & Alloy Steel Wiper (High Surface inish) Medium and Precision inishing or Thin Wall Tubing & Deep Boring PEX UEM UEX DPC15HT DPC25UT DPC15HT DPC25UT DPC35RT DPC15HT DPC25UT DPC35RT ,52mm - 4,0mm 0,50mm - 4,0mm 1,0mm - 3,2mm 0,20mm - 0,80mm 0,08mm - 0,33mm 0,20mm - 0,45mm DPC15HT Roughing PSH DPC25UT ,00mm - 12,50mm 0,41mm - 1,60mm DPC35RT Heavy Roughing PSS DPC15HT DPC25UT DPC35RT ,00mm - 12,50mm 0,41mm - 1,60mm Extra Heavy Duty Roughing PST DPC15HT DPC25UT DPC35RT ,5mm - 12,50mm 0,80mm - 1,60mm High Performance MEH DMC20HT ,0mm - 3,75mm 0,18mm - 0,43mm M Stainless Steel inishing ME DMC30UT 0,50mm - 4,00mm 0,10mm - 0,33mm Medium MEM DMC30UT ,20mm mm 1,52mm - 0,40mm Roughing MER DMC30UT 1,20mm - 7,75mm 0,33mm - 7,9mm K Cast Iron inishing KE DKC10UT ,10mm - 2,03mm 0,05mm - 0,30mm DKC10UT Roughing KER 0,80mm - 12,00mm 0,30mm - 0,60mm DKC15RT S Titanium & Super Alloy High Performance SEH DSP10HT (Titanium Only) DSP20HT ,00mm - 3,5mm 0,08mm -0,045mm S Titanium - Super Alloy & Multi-Material inishing SE DSP15HT 0,50mm - 4,0mm 0,08mm - 0,25mm Medium SEM DSP15HT ,00mm - 3,50mm 0,10mm - 0,33mm Roughing SER DSP15HT 1,20mm - 6,0mm 0,15mm - 0,40mm Call: Visit: sales@doriantool.com 4

6 Positive s Material Application Chip Breaker Grade V c a p Depth of Cut f n eed Rate Harder Tougher Meters per minute mm mm per Rev General Purpose DNU25GT S Multi-Material Universal UE DUP25GT Unstable Condition DUP35RT General Purpose DUP15VT Universal UEU DUP25GT ,05mm - 2,0mm 0,05mm - 2,0mm 0,05mm - 0,20mm 0,05mm - 0,20mm Unstable Condition DPC35RT DPC15HT inishing PE DPC25UT ,10mm - 2,0mm 0,05mm - 0,20mm DPC35RT DPC15HT P Steel & Alloy Steel Medium Universal PEM PEU DPC25UT DPC35RT DPC15HT DPC25UT ,080mm - 5,0mm 0,50mm - 4,0mm 0,15mm - 0,40mm 0,15mm - 0,40mm DPC35RT High Performance DPC15HT Universal UEX DPC25UT ,0mm - 3,2mm 0,20mm - 4,6mm Unstable Condition DPC35RT M Stainless Steel High Performance MEH DMC20HT ,0mm - 3,8mm 0,18mm - 0,43mm Universal MEM DCM30UT ,20mm - 5,5mm 0,15mm - 4,0mm K Cast Iron General Application KEM DKC15RT ,20mm - 3,18mm 0,05mm - 0,30mm N Aluminum General Purpose DNU10GT NU High Performance DNX10UT ,99mm - 8,0mm 0,08mm - 1,0mm S Titanium & Super Alloy High Performance SEH DSP10HT (Titanium Only) DSP20HT ,0mm - 3,5mm 0,08mm - 0,46mm 5 Call: Visit: sales@doriantool.com

7 Multi-Material Applications Positive Precision Ground s CDGX-UER 80º Diamond Universal Right CDGX-UEL 80º Diamond Universal Left CCGX-UER 80º Diamond Universal Right CCGX-UEL 80º Diamond Universal Left ISO Grade Grade Grade DNU25GT DUP25GT DUP35RT CDGX UER CDGX UER CDGX UEL CDGX UEL CCGX UER CCGX UEL Multi-Material Applications Positive Precision Ground s CCGT-UEU 80º Diamond Universal CPGT-UEU 80º Diamond Universal DCGT-UEU 55º Diamond Universal ISO Grade Grade Grade Grade DNU10GT DUP15VT DUP25GT DUP35RT CCGT UEU CCGT UEU CCGT UEU CCGT-09T302-UEU CCGT-09T304-UEU CCGT UEU CCGT UEU CPGT-05T102-UEU CPGT-05T104-UEU CPGT UEU CCGT-09T302-UEU CCGT-09T304-UEU DCGT UEU DCGT UEU DCGT UEU DCGT-11T301-UEU DCGT-11T302-UEU DCGT-11T304-UEU DCGT-11T308-UEU DCGT UEU DCGT UEU DCGX-UER 55º Diamond Universal Right DCGX-UEL 55º Diamond Universal Left TCGX-UER 60º Triangle Universal Right DCGX UER DCGX UEL TCGX UER TCGX UER TCGT-UEU 60º Triangle Universal TPGT-UEU 60º Triangle Universal TCGT UEU TCGT UEU TCGT UEU TCGT-16T302-UEU TCGT-16T304-UEU TCGT-16T308-UEU TPGT UEU TPGT UEU TPGT UEU TPGT-16T302-UEU TPGT-16T304-UEU TPGT-16T308-UEU VBGX-UER 35 Diamond Universal Right VBGX UER VBGT-UEU 35º Diamond Universal VBGT UEU VBGT UEU VBGT UEU VBGX-UEL 35 Diamond Universal Left VCGX-UER 35º Diamond Universal Right VBGX UEL VCGX UER VCGT-UEU 35º Diamond Universal VCGT UEU VCGT UEU VCGT UEU VCGT UEU VCGT UEU VCGT UEU VCGX-UEL 35º Diamond Universal Left VCGX UEL WCGT-UEU 80º Trigon Universal WCGT-S30201-UEU WCGT-S30202-UEU WCGT UEU WCGT-06T304-UEU WCGT-06T308-UEU Call: Visit: sales@doriantool.com 6

8 Alloy Steel Applications Positive s CCMT-PE 80º Diamond inishing ISO Grade Grade Grade DPC15HT DPC25UT DPC35RT CCMT PE CCMT PE CCMT PE CCMT-09T304-PE CCMT-09T308-PE CCMT PE Alloy Steel Applications Positive s VCMT-PE 35º Diamond inishing ISO Grade Grade Grade DPC15HT DPC25UT DPC35RT VCMT PE VCMT PE VCMT PE CCMT-PEM 80º Diamond Medium DCMT-PE 55º Diamond inishing CCMT PEM CCMT PEM CCMT PEM CCMT-09T304-PEM CCMT-09T308-PEM CCMT PEM CCMT PEM DCMT PE DCMT-11T304-PE VCMT-PEM 35º Diamond Medium WCMT-PE 80º Trigon inishing VCMT PEM VCMT PEM WCMT PE DCMT-PEM 55º Diamond Medium RCMX-UEX Metric Round RCMT-UM Inch Round SCMT-PE Square inishing DCMT PEM DCMT-11T304-PEM DCMT-11T308-PEM RCMX-1003MO-UEX RCMX-1204MO-UEX RCMX-1606MO-UEX RCMX-2006MO-UEX RCMX-2507MO-UEX RCMX-3209MO-UEX RCMT UM RCMT UM RCMT UM SCMT-09T304-PE Alloy Steel & Stainless Steel Applications (for lower cutting pressure) Positive Precision Ground s CCGT-UEXL 80 Diamond Universal Left CCGT-UEXR 80 Diamond Universal Right ISO Alloy Steel Alloy Steel Stainless Steel DPC25UT DPC35RT DMC30UT CCGT UEXL CCGT UEXL CCGT-09T304 UEXL CCGT-09T308 UEXL CCGT UEXL CCGT UEXL CCGT UEXR CCGT UEXR CCGT-09T304 UEXR CCGT-09T308 UEXR CCGT UEXR CCGT UEXR SCMT-PEM Square Medium SCMT-09T308-PEM SCMT PEM SCMT PEM DCGT-UEXL 55 Diamond Medium Left DCGT UEXL DCGT-11T304 UEXL DCGT-11T308 UEXL TCMT-PE 60º Triangle inishing TCMT-06T102-PE TCMT PE TCMT PE DCGT-UEXR 55 Diamond Roughing Right DCGT UEXR DCGT-11T304 UEXR DCGT-11T308 UEXR TCMT-PEM 60º Triangle Medium TPMR-PEU 60º Triangle Medium VBMT-PE 35º Diamond inishing TCMT PEM TCMT PEM TCMT-16T304-PEM TCMT-16T308-PEM TPMR PEU TPMR PEU TPMR PEU TPMR PEU VBMT PE VBMT PE VBMT PE TCGT-UEXL 60 Triangle Universal Left TCGT-UEXR 60 Triangle inishing/ Medium Right TCGT UEXL TCGT-16T304 UEXL TCGT-16T308 UEXL TCGT UEXR TCGT-16T304 UEXR TCGT-16T308 UEXR Call: Visit: sales@doriantool.com

9 Multi-Material Applications Positive Precision Ground s CDGW-KEU 80º Diamond Universal ISO Grade Grade Grade DKU10HT DUP15VT DUP35RT CCDGW-S4T001-KEU CCDGW-S4T002-KEU CDGW KEU CDGW KEU Titanium & High Temp Alloy Applications Positive s CCMT-SEH 80 Diamond Universal ISO Titanium Grade DSP10HT High Temp Grade DSP20HT CCMT-093T04-SEH DCMT-SEH 55 Diamond Universal DCMT-11T04-SEH CCGW-KEU 80º Diamond Universal CCGW KEU CCGW-09T308-KEU RCMT-SEH Round Roughing RCMT-1606-MO-SEH RCMT-2006-MO-SEH CPGW-KEU 80º Diamond Universal DCGW-KEU DCMW-KEU 55º Diamond Universal CPGW-05T102-KEU CPGW-05T104-KEU CPGW KEU CPGW-09T304-KEU CPGW-09T308-KEU DCGW KEU DCMW-11T304-KEU DCMW-11T308-KEU Alloy Steel Applications Positive Ground s TPG-UEN 60 Triangle General Purpose TPGB-UEN 60 Triangle General Purpose ISO Grade Grade Grade DNU25GT DNP25GT DPP30GT TPG UEN TPG UEN TPG UEN TPG UEN TPG UEN TPG UEN TPG UEN TPGB UEN TPGB UEN TPGB UEN TPGB UEN TPGB UEN TPGB UEN TCGW-KEU 60º Triangle Universal TCGW KEU TCGW-16T308-KEU TPGH-UEN 60º Triangle General Purpose TPGH UEN TPGH UEN TPGH UEN TPGH UEN TPGH UEN TPGH UEN TPGW-KEU 60º Triangle Universal TPGW KEU TPGW-16T304-KEU TPGW-16T308-KEU TPHT-UEN 60 Triangle General Purpose TPHT-16T304-UEN TPHT-16T308-UEN VBGW-KEU 35º Diamond Universal VBGW KEU VBGW KEU VBGW KEU Positive Convex Radius s for Multi-Material Applications ISO Radius Grade Grade DNU25GT DUP25GT SDGX-09T3C04-E 0,40 mm SDGX-UEN SDGX-09T3C12-E 1,19 mm ,5mm Square Convex Radius SDGX-09T3C16-E 1,57 mm VCGW-KEU 35º Diamond Universal VCGW KEU VCGW KEU VCGW KEU SDGX-UEN 19mm Square Convex Radius SDGX-1904C05-E 2,00 mm SDGX-1904C06-E 2,38 mm SDGX-1904C07-E 2,76 mm SDGX-1904C08-E 3,17 mm SDGX-1904C09-E 10,5 mm SDGX-1904C10-E 3,96 mm SDGX-1904C11-E 4,52 mm SDGX-1904C12-E 4,77 mm SDGX-1904C13-E 5,15 mm SDGX-1904C14-E 5,56 mm SDGX-1904C15-E* 5,94 mm SDGX-1904C16-E* 6,35 mm *All SDGX inserts have 4 cutting edges, except 5,94mm & 6,35mm radius inserts that have 2 cutting edges. Call: Visit: sales@doriantool.com 8

10 Stainless Steel Applications Positive s CCMT-MEM 80º Diamond inishing/medium CCMT-MEH 80º Diamond High Performance DCMT-MEM 55º Diamond inishing / Medium ISO Grade Grade DMC20HT DMC30UT CCMT-09T304-MEM CCMT-09T308-MEM CCMT MEM CCMT MEM CCMT-09T304-MEH CCMT-09T308-MEH DCMT-11T304-MEM DCMT-11T308-MEM Aluminum Applications Ground & Polished s CCGT-NU 80º Diamond Universal DCGT-NU 55º Diamond Universal ISO Grade Grade DNU10GT DNX10UT CCGT NU CCGT NU CCGT-09T302-NU CCGT-09T304-NU CCGT-09T308-NU CCGT NU CCGT NU DCGT NU DCGT NU DCGT-11T302-NU DCGT-11T304-NU DCGT-11T308-NU DCMT-MEH 55º Diamond High Performance DCMT-11T304-MEH DCMT-11T308-MEH RCMT-NU Round Universal RCMT-0602MO-NU SCMT-MEM Square Medium SCMT MEM RCGT-NU Round Universal RCGT-0602MO-NU RCGT-0803MO-NU RCGT-1003MO-NU TCMT-MEM 60º Triangle Medium TCMT MEM TCMT MEM TCMT-16T304-MEM TCMT-16T308-MEM SCGT-NU Square Universal SCGT NU VCMT-MEM 35º Diamond Medium VCMT MEM VCMT MEM VCMT MEM TCGT-NU 60º Triangle Universal TCGT NU TCGT-16T304-NU Cast Iron Applications Positive s CCMT-KEM 80º Diamond inishing/medium ISO Grade Grade DKC10UT DKC15RT CCMT-09T304-KEM CCMT-09T308-KEM CCMT KEM VCGT-NU 35º Triangle Universal VCGT NU VCGT NU VCGT NU VCGT NU VCGT NU VCGT NU VCGT NU DCMT-KEM 55º Diamond inishing/medium DCMT KEM DCMT KEM DCMT-11T304-KEM DCMT-11T308-KEM VPGT-NU 35º Triangle Universal VPGT NU VPGT NU VPGT NU SCMT-KEM Square Medium SCMT KEM WCGT-NU 80º Trigon Universal WCGT-06T302-NU WCGT-06T304-NU WCGT-06T308-NU WCGT NU WCGT NU Call: Visit: sales@doriantool.com

11 Alloy Steel Applications Negative s CNMG-PE 80º Diamond inishing Grade ISO DPC15HT DPC25UT DPC35RT CNMG PE CNMG PE Alloy Steel Applications Negative s SNMG-PER Square Roughing Grade ISO DPC15HT DPC25UT DPC35RT SNMG PER SNMG PER SNMG PER SNMG PER CNMG-UEM 80º Diamond Universal CNMG UEM CNMG UEM TNMG-PE 60º Triangle inishing TNMG PE TNMG PE CNMG-PEM 80º Diamond Medium CNMG-PER 80º Diamond Roughing DNMG-PE 55º Diamond inishing CNMG PEM CNMG PEM CNMG PEM CNMG PEM CNMG PEM CNMG PEM CNMG PEM CNMG PEM CNMG PER CNMG PER CNMG PER CNMG PER CNMG PER CNMG PER CNMG PER CNMG PER DNMG PE DNMG PE DNMG PE DNMG PE DNMG PE DNMG PE TNMG-UEM 60º Triangle Universal TNMG-PEM 60º Triangle Medium VNMG-PE 35º Diamond inishing TNMG UEM TNMG UEM TNMG PEM TNMG PEM TNMG PEM TNMG PEM VNMG PE VNMG PE DNMG-UEM 55º Diamond Universal DNMG UEM DNMG UEM DNMG UEM DNMG UEM DNMG UEM VNMG-UEM 35º Diamond Universal VNMG UEM DNMG-PEM 55º Diamond Medium DNMG PEM DNMG PEM DNMG PEM DNMG PEM DNMG PEM DNMG PEM VNMG-PEM 35º Diamond inishing VNMG PEM VNMG PEM DNMG-PER 55º Diamond Roughing SNMG-PE Square inishing DNMG PER DNMG PER DNMG PER DNMG PER DNMG PER SNMG PE WNMG-UEM 80º Trigon Universal WNMG UEM WNMG UEM WNMG UEM WNMG UEM WNMG UEM SNMG-UEM Square Universal SNMG UEM WNMG-PEM 80º Trigon Medium WNMG PEM WNMG PEM WNMG PEM SNMG-PEM Square Medium SNMG PEM SNMG PEM SNMG PEM SNMG PEM WNMG-PER 80º Trigon Roughing WNMG PER WNMG PER Call: Visit: sales@doriantool.com 10

12 Alloy Steel & Stainless Steel Applications Negative s (for lower cutting pressure) CNMX-UEXL 80 Diamond Left ISO Alloy Steel Alloy Steel Alloy Steel Stainless Steel DPC15HT DPC25UT DPC35RT DMC30UT CNMX UEXL CNMX UEXL Heavy Duty Roughing Steel Applications Single Sided Negative s CNMM-PSH 80º Diamond Roughing Grade ISO DPC15HT DPC25UT DPC35RT CNMM PSH CNMM PSH CNMM PSH CNMM PSH CNMM PSH CNMM PSH CNMM PSH CNMX-UEXR 80 Diamond Right CNMX UEXR CNMX UEXR CNMM-PSS 80º Diamond Heavy Roughing CNMM PSS DNMX-UEXL 55 Diamond Left DNMX-UEXR 55 Diamond Right DNMX UEXL DNMX UEXL DNMX UEXL DNMX UEXL DNMX UEXL DNMX UEXL DNMX UEXR DNMX UEXR DNMX UEXR DNMX UEXR CNMM-PST 80º Diamond X Heavy Roughing SNMM-PHS Square Roughing CNMM PST CNMM PST SNMM PSH SNMM PSH SNMM PSH SNMM PSH SNMM PSH SNMM PSH SNMM PSH SNMM PSH DNMX UEXR TNMX-UEL 60 Triangle Left DNMX UEXR TNMX UEXL TNMX UEXL SNMM-PSS Square Heavy Roughing SNMM-PST Square X Heavy Roughing SNMM PSS SNMM PSS SNMM PST SNMM PST TNMX-UEXR 60 Triangle Right TNMX UEXR TNMX UEXR Wiper s for Alloy Steel & Stainless Steel Applications CNMG-PEX 80 Diamond High Performance ISO Grade Grade DPC15HT DPC25UT CNMG PEX CNMG PEX DNMG-PEX 55 Diamond High Performance DNMG PEX Call: Visit: sales@doriantool.com

13 Stainless Steel Applications Negative s CNMG-ME 80 Diamond inishing ISO Grade Grade DMC20HT DMC30UT CNMG ME CNMG ME CNMG ME CNMG ME Stainless Steel Applications Negative s TNMG-MEM 60 Triangle Medium ISO Grade Grade DMC20HT DMC30UT TNMG MEM TNMG MEM TNMG MEM CNMG-MEM 80 Diamond Medium CNMG MEM CNMG MEM WNMG-ME 80 Trigon inishing WNMG ME WNMG ME WNMG ME CNMG-MEH 80 Diamond High Performance CNMG MEH CNMG MEH CNMG MEH CNMG MEH CNMG MEH CNMG MEH WNMG-MEH 80 Trigon High Performance WNMG MEH CNMG-MER 80 Diamond Roughing CNMG MER CNMG MER CNMG MER WNMG-MEM 80 Trigon Medium WNMG MEM WNMG MEM WNMG MEM WNMG MEM DNMG-ME 55 Diamond inishing DNMG ME DNMG ME DNMG ME WNMG-MER 80 Trigon Roughing WNMG MER WNMG MER DNMG-MEM 55 Diamond Medium DNMG MEM DNMG MEM DNMG MEM DNMG MEM DNMG-MEH 55 Diamond High Performance DNMG MEH DNMG MEH DNMG-MER 55 Diamond Medium DNMG MER DNMG MER SNMG-ME Square inishing SNMG ME SNMG-MEH Square High Performance SNMG MEH SNMG MEH SNMG MEH SNMG MEH SNMG-MER Square Roughing SNMG MER SNMG MER SNMG MER Call: Visit: sales@doriantool.com 12

14 Cast Iron Applications Negative s CNMG-KE 80º Diamond inishing ISO DKC10UT DKC15RT CNMG KE Titanium & High Temp Alloy Applications Negative s CNGG-SE 80º Diamond inishing Titanium Grade High TempGradeHigh TempGrade ISO DSP10HT DSP15HT DSP20HT CNGG SE CNGG SE CNGG SE CNMA-KEU 80º Diamond General Purpose CNMA KEU CNMA KEU CNMA KEU CNMA KEU CNM/GG-SEM 80º Diamond Medium CNGG SEM CNGG SEM CNGG SEM CNMG SEM CNMG SEM CNMG-KER 80º Diamond Roughing CNMG KER CNMG KER CNMG KER CNMG KER CNMG KER CNGG-SER 80º Diamond Roughing CNGG SER CNGG SER DNMG-KE 55º Diamond inishing DNMG KE DNMG KE CNMG-SEH 80º Diamond Roughing CNMG SEH DNMA-KEU 55º Diamond General Purpose DNMA KEU DNGG-SE 55º Diamond inishing DNGG SE DNGG SE DNGG SE DNGG SE DNGG SE DNGG SE DNMG-KER 55º Diamond Roughing DNMG KER DNMG KER DNMG KER DNMG KER DNMG-SEM 55º Diamond Medium DNMG SEM DNMG SEM DNMG SEM DNMG SEM DNMG SEM DNMG SEM SNMA-KEU Square General Purpose SNMA KEU SNMA KEU SNMA KEU SNMA KEU SNMA KEU DNMG-SEH 55º Diamond Roughing DNMG SEH SNMG-KER Square Roughing SNMG KER SNMG KER SNMG KER SNMG KER VNMG-SE 35º Diamond inishing VNMG SE VNMG SE TNMA-KEU Triangle General Purpose TNMA KEU TNMA KEU TNMA KEU WNGG-SE 80º Trigon inishing WNGG SE WNGG SE WNGG SE WNMA-KEU 80º Trigon General Purpose WNMA KEU WNMA KEU WNM/GG-SEM 80º Trigon Medium WNGG SEM WNGG SEM WNMG SEM WNMG SEM WNMG SEM WNMA-KER 80º Trigon Roughing WNMG KER WNMG KER WNMG-SEH 80º Trigon Medium WNMG SEH Call: Visit: sales@doriantool.com

15 Jet-StreamTMTHRU COOLANT SYSTEM Turning-Boring-Threading Changing the way metal is CUT! On Target at the Cutting Edge - Performance - Quality and surface finish - life - Chip control Call: Visit: sales@doriantool.com 14

16 ADCLN R/L Tool holder Style L - 5º end or side cutting lead angle for negative 80º diamond CNM_inserts Turning Right Left Shank Height Length CNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADCLNR/L-2020-K JC-432 SM-M4-6 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADCLNR/L-2525-M JC-432 SM-M4-8 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADCLNR/L-3232-P JC-432 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADCLNR/L-3232-P JC-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADCLNR/L-4040-S JC-432 SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADCLNR/L-4040-S JC-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADDJN R/L Tool holder Style J - 3º side cutting lead angle for negative 55º diamond DNM_inserts Turning Right Left Shank Height Length DNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADDJNR/L-2020-K S5511P SM-M3 JSLC-HPD3 JSCS-04 JSBP-M4-039 ADDJNR/L-2020-K IDSN-423 SM-S4 JSLC-HPD4 JSCS-04 JSBP-M4-039 ADDJNR/L-2525-M IDSN-423 SM-S4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDJNR/L-3232-P IDSN-423 SM-S4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDJNR/L-4040-S IDSN-423 SM-S4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDPNN Tool holder Style P º side cutting lead angle for negative 55º diamond DNM_inserts Turning Shank Neutral Height Length DNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADDPNN-2020-K S5511P SM-M3 JSLC-HPD3 JSCS-04 JSBP-M4-039 ADDPNN-2020-K IDSN-423 SM-M4 JSLC-HPD4 JSCS-04 JSBP-M4-039 ADDPNN-2525-M S5511P SM-M3 JSLC-HPD3 JSCS-04 JSBPE-M4-039 ADDPNN-2525-M IDSN-423 SM-M4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDPNN-3232-P IDSN-423 SM-M4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADDPNN-4040-S IDSN-423 SM-M4 JSLC-HPD4 JSCS-04 JSBPE-M4-039 ADSDNN Tool holder Style D - 45º side cutting lead angle for negative square SNM_inserts Turning Shank Neutral Height Length SNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADSDNN-2020-M S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADSDNN-2525-M S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADSDNN-3232-P S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADSDNN-3232-P JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADSDNN-4040-S JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADSRN R/L Tool holder Style R - 15º side cutting lead angle for negative square SNM_inserts Turning Right Left Shank Height Length SNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADSRNR/L-2020-K S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADSRNR/L-2525-M S9012P SM-M4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADSRNR/L-3232-P JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M4-039 ADSRNR/L-4040-S JS-533 SM-M6 JSLC-HPC5 JSCS-04 JSBPE-M Call: Visit: sales@doriantool.com

17 ADTENN Tool holder Style E - 30º side cutting lead angle for negative triangle TNM_inserts Turning Shank Neutral Height Length TNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADTENN-2020-K JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTENN-2020-K JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADTENN-2525-M JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTENN-2525-M JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADTENN-3232-P JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTENN-4040-S JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTJN R/L Tool holder Style J - 3º side cutting lead angle for negative triangle TNM_ inserts Turning Right Left Shank Height Length TNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADTJNR/L-2020-K JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTJNR/L-2020-K JT-433 SM-M4-8 JSLC-HPCTW-4N JSCS-04 JSBP-M4-039 ADTJNR/L-2525-M JT-322 SM-M3-T JSLC-HPTW3N JSCS-04 JSBP-M4-039 ADTJNR/L-2525-M JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTJNR/L-3232-P JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADTJNR/L-4040-S JT-433 SM-S4 JSLC-HPCTW-4N JSCS-04 JSBPE-M4-039 ADVJN R/L Tool holder Style J - Negative 3º side cutting lead angle for negative 35º diamond VNM_inserts Turning Right Left Shank Height Length VNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADVJNR/L-2020-K S3516P SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 ADVJNR/L-2525-M S3516P SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 ADVJNR/L-3232-P S3516P SM-M3 JSLC-HPV3 JSCS-04 JSBPE-M4-039 ADWLN R/L Tool holder Style L - Negative 5º end or side cutting lead angle for negative 80º trigon WNM_ inserts Turning Right Left Shank Height Length WNM_Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Bottom Port Nozzle ADWLNR/L-2020-K IWSN-322 SM-M3 JSLC-HPTW3R/L JSCS-04 JSBP-M4-039 ADWLNRL-2020-K IWSN-423 SM-S4 JSLC-HPTW4R/L JSCS-04 JSBP-M4-039 ADWLNR/L-2525-M IWSN-322 SM-M3 JSLC-HPTW3R/L JSCS-04 JSBP-M4-039 ADWLNR/L-2525-M IWSN-433 SM-S4 JSLC-HPTW4R/L JSCS-04 JSBP-M4-039 ADWLNR/L-3232-P IWSN-423 SM-S4 JSLC-HPTW4R/L JSCS-04 JSBPE-M4-039 ADWLNR/L-4040-S IWSN-423 SM-S4 JSLC-HPTW4R/L JSCS-04 JSBPE-M4-039 AS-ADCLN R/L Boring Bar Style L - Negative 5º side & end cutting lead angle for negative 80º diamond CNM_inserts Boring Right Left Min. Bore Bar Size CNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-20R-ADCLNR/L N/A N/A JSLC-HPC3-B JSCS-03 JSPN-M3 AS-25R-ADCLNR/L NA NA JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-32S-ADCLNR/L S8012P SM-S4 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-40S-ADCLNR/L S8012P SM-S4 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-50T-ADCLNR-L DC M1 JSLC-HPCTW-4N JSCS-04 JSPN-M6 Call: Visit: sales@doriantool.com 16

18 AS-ADDPN R/L Boring Bar Style P- Negative 27.5 end cutting lead angle for negative 55º diamond DNM_ inserts Boring Right Left Min. Bore Bar Size DNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-32S-ADDPNR/L DD-422 TS5.8-10M2 JSLC-HPD4 JSCS-04 JSPN-M6 AS-ADDUN R/L Boring Bar Style U - Negative 3º end cutting lead angle for negative 55º diamond DNM _inserts Boring Right Left Min. Bore Bar Size DNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-25R-ADDUNR/L S5511P SM-M3 JSLC-HPDT3R/L JSCS-03 JSPN-M3 AS-32S-ADDUNR/L DD-422 TS5.8-10M2 JSLC-HPD4 JSCS-04 JSPN-M6 AS-40S-ADDUNR/L DD-422 TS5.8-10M2 JSLC-HPD4 JSCS-04 JSPN-M6 AS-50T-ADDUNR/L DD-422 TS5.8-10M2 JSLC-HPD4 JSCS-04 JSPN-M6 AS-ADSKN R/L Boring Bar Style K - 15º End cutting lead angle for negative square SNM_inserts Boring Right Left Min. Bore Bar Size SNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-32S-ADSKNR/L S9012P SM-S4 JSLC-HPCTW-4N JSCS-04 JSPN-M6 AS-ADTUN R/L Boring Bar Style U - Negative 3º end cutting lead angle for negative triangle TNM_ inserts Boring Right Left Min. Bore Bar Size TNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-20R-ADTUNR/L N/A N/A JSLC-HPDT3R/L JSCS-03 JSPN-M3 AS-25R-ADTUNR/L JT-322 SM-M3-T JSLC-HPDT3R/L JSCS-03 JSPN-M3 AS-32S-ADTUNR/L JT-433 SM-S4 JSLC-HPTW4R/L JSCS-04 JSPN-M6 AS-40S-ADTUNR/L JT-433 SM-S4 JSLC-HPTW4R/L JSCS-04 JSPN-M6 AS-ADVUN R/L Boring Bar Style U - Negative 3º side cutting lead angle for negative 35º diamond VNM_ inserts Boring Right Left Min. Bore Bar Size VNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-32R-ADVUNR/L S3516P SM-M3 JSLC-HPV3 JSCS-04 JSPN-M6 AS-40S-ADVUNR/L S3516P SM-M3 JSLC-HPV3 JSCS-04 JSPN-M6 17 Call: Visit: sales@doriantool.com

19 AS-ADWLN R/L Boring Bar Style L - Negative 5º end & side cutting lead angle for negative 80º trigon WNM_inserts Boring Right Left Min. Bore Bar Size WNM_ Gage Seat Seat Screw Dor-Lock Clamp Clamp Screw Chip lush Plug AS-20R-ADWLNR/L N/A N/A JSLC-HPW3-B JSCS-03 JSPN-M3 AS-25R-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 AS-32S-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 AS-40S-ADWLNR/L IWSN-423 SM-S4 JSLC-HPTW-4R/L JSCS-04 JSPN-M6 ADLE Qualified Laydown Threading Tool holder Style E - offset head for Laydown inserts Turning Right Left Min. Bore Bar Size ADLER/L Q-K ADLER/L Q-M Gage Seat Screw 16-G60 GXE/I-16 TS M1 Dor-Lock Clamp JSLC-HP16R-N JSLC-HP16L-N Clamp Screw JSCS-03 ADLER/L Q-M N60 NXE/I-22 TS M1 JSLC-HP22N JSCS-04 AS-ADLN R/L Threading Bar Style N - Internal Laydown bar for Laydown threading Boring R.H. L.H. Min. Bore B AS-20R-ADLNR/L AS-25R-ADLNR/L AS-32S-ADLNR/L AS-40S-ADLNR/L D Gage Seat Screw 16-G60 GXE/I-16 TS M1 Dor-Lock Clamp JSLC-HP16R-N JSLC-HP16L-N Clamp Screw JSCS-03 Chip lush Plug JSPN-M3 AS-32S-ADLNR/L N60 NXE/I-22 TS M1 JSLC-HP22N JSCS-04 JSPN-M6 Call: Visit: sales@doriantool.com 18

20 2 Standard Pressure Coolant Connection 3 Pcs. Kit 1 Working Pressure 3 up to 400 psi (30 bar) Part # Bar PSI Item JSPLPCK /16 NPT Standard Pressure Quick Release Coolant 3 pcs Kit JS-T /4 OD, 30cm Long Standard Pressure Tubing 2 JS-MC /16 NPT-1/4 Bore, Straight Std Pressure Quick Release Connector 3 JS-MC /8 NPT-1/4 Bore, Straight Std Pressure Quick Release Connector Item JSPLPCK /8 NPT Standard Pressure Quick Release Coolant 3 pcs Kit JS-T /4" OD, 30cm Long Standard Pressure Tubing 2 JS-MC /8" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector 3 JS-MC /8" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector Item JSPLPCK /4" NPT Standard Pressure Quick Release Coolant 3 pcs Kit JS-T /4" OD, 30cm Long Standard Pressure Tubing 2 JS-MC /8" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector 3 JS-MC /4" NPT-1/4" Bore, Straight Std Pressure Quick Release Connector High Pressure Coolant Connection 5 Pcs. Kit Working Pressure over 400 psi (30 bar) Part # Bar PSI Item DT-1/8 HP-QRCK /8" NPT High Pressure Quick Release Coolant 5 pcs Kit DT-HPTU-8X mm High Pressure Coolant Tubing 2 DT-HP90C-1/8x High Pressure Quick Release Straight Intake 3 DT-HP90C-1/8x High Pressure Quick Release Straight Intake 4 DT-HP90C-1/8x /8" NPT Straight High Pressure Quick Release Connector 5 DT-HP90C-1/8x /8" NPT 90 Elbow High Pressure Quick Release Connector Item DT-1/4 HP-QRCK /4 NPT High Pressure Quick Release Coolant 5 pcs Kit DT-HPTU-8X mm High Pressure Coolant Tubing 2 DT-HP90C-1/8x High Pressure Quick Release Straight Intake 3 DT-HP90C-1/8x High Pressure Quick Release Straight Intake 4 DT-HPOSC-1/4x /4" NPT Straight High Pressure Quick Release Connector 5 DT-HP90C-1/8x /8" NPT 90 Elbow High Pressure Quick Release Connector Part # Item DT-HP-PLIERS High Pressure Disconnecting Pliers To Disconnect the Coolant Hose ollow 2 Safe & Easy Steps: 1. Place the thinner section of the wrench-nose between the coolant hose and the connector. 2. Close the wrench and it will disconnect Notch 1 of the coolant hose. Use the thicker section of the wrench-nose and close again to disconnect Notch 2. Ball-Type Coolant Nozzles Sold Separately Acetal Material Brass Material Ball-Type Coolant Nozzles Size Acetal (Hard Plastic) Material Note: or machines that have turrets with 1/8 NPT tapped coolant holes, you do not need a ball type coolant nozzle. Ball type coolant nozzles are sold separately. Brass Material 12mm OD, 1/8NPT ID JSCNA JSCNB mm OD, 1/8NPT ID JSCNA JSCNB mm OD, 1/8NPT ID JSCNA JSCNB mm OD, 1/8NPT ID JSCNA JSCNB /2" OD, 1/8NPT ID JSCNA JSCNB /8" OD, 1/8NPT ID JSCNA JSCNB Call: Visit: sales@doriantool.com

21 Jet-Stream TM Thru Coolant System Spare Parts Image Image Image Dor-Lock Clamps for Laydown Threading holders 60 PARTIAL PROILE INSERT STYLE JSLC-HP16R-N JSLC-HP16L-N JSLC-HP22N JSLC-HP27N Jet-Stream Shim Seats 80 DIAMOND JC JC JC Jet-Stream Clamp Screws CLAMP SCREWS JSCS JSCS JSCS JSCS-04-HPV Includes upper and lower o-rings Dor-Lock Clamps for DorNotch Threading holders NT & NTP 60 INSERT STYLE Includes upper and lower o-rings JSLC-HP JSLC-HP JSLC-HP JSLC-HP Dor-Lock Clamps for CNMG & SNMG holders CNMG & SNMG INSERT STYLES Includes upper and lower o-rings JSLC-HPC3-B JSLC-HPCTW-4N JSLC-HPC JSLC-HPC Dor-Lock Clamps for DNMG & TNMG holders DNMG INSERT STYLES JSLC-HPD JSLC-HPD DIAMOND JD IDSN DIAMOND IDSN JV SQUARE JS JS ISSN TRIANGLE JT JT Jet-Stream Clamp O-Ring Seals UPPER O RINGS JSOR JSOR LOWER O RINGS JSOR Jet-Stream lush Nozzle/Plug BORING BAR CHIP LUSH PLUG Torx Keys JSOR JSOR JSOR JSOR JSPN-M JSPN-M JSN-M TNMG INSERT STYLES JSLC-HPDT3-BR JSLC-HPDT3-BL TRIGON IWSN IWSN IWSN TORX KEYS T T Includes upper and lower o-rings LAYDOWN SHIM SEAT GXE/I NXE/I VXE/I Jet-Stream Clamp Alignment Pin ALIGNMENT PIN JSCAP Dor-Lock Clamps for TNMG & WNMG holders TNMG & WNMG INSERT STYLES Includes upper and lower o-rings Dor-Lock Clamps for VNMG holders VNMG INSERT STYLE Includes upper and lower o-rings JSLC-HPTW3N JSLC-HPTW3R JSLC-HPTW3L JSLC-HPCTW-4N JSLC-HPTW4R JSLC-HPTW4L JSLC-HPW3-B JSLC-HPV NEW High Volume Turning Dor-Lock Clamp CNMG / TNMG / WNMG INSERT STYLES JSLC-HPCTW-4N-HPV DORNOTCH SHIM SEAT Torx Screws/ Shim Screws INSERT SCREWS SHIM SCREWS SM GTS-1M GTS GTS TS M TS M TS M TS M SL SM-M SM-M3-T SM-M SM-M SM-S SM-M SM-M SM-M SM-M Jet-Stream Underport Nozzle Underport Nozzle JSBP-M JSB PE-M Jet-Stream Underport Seal UNDERPORT SEAL JSBPS-M Includes upper and lower o-rings Call: Visit: sales@doriantool.com 20

22 CARBIDE BORING BARS Thru Coolant - High Performance U l t i m a t e Rigidity M i n i m i z e Vibrations H e a v y Duty Roughing V e r y ine inishing B e t t e r Surface inish 6xD Boring Ratio (8xD for softer materials) Superior surface finish compared to steel boring bars All Thru Coolant Bars (Negative boring bars are Jet-Stream) 12mm and above sizes have threaded ends for coolant connector 21 Call: Visit: sales@doriantool.com

23 E_SCLD R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 15 positive 80 diamond CD inserts Right Left Boring Ratio Dia. Min. CD Bore Length E04M-H-SCLDR/L , E05M-H-SCLDR/L :1 5 5, E06M-H-SCLDR/L , E07M-H-SCLDR/L , :1 E08M-K-SCLDR/L , s used: all CD series (CDGX, CDMT, CDGW, CDGB). S4T E_SCLC R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End & Side Cutting Edge Angle for 7 positive 80 diamond CC inserts Right Left Boring Ratio Dia. Min. CC Bore Length E10M-M-SCLCR/L , E12M-K-SCLCR/L , E12M-R-SCLCR/L : , E16M-M-SCLCR/L , E16M-S-SCLCR/L , E12M-K-SCLCR/L , E12M-R-SCLCR/L , E16M-M-SCLCR/L , E16M-S-SCLCR/L : , E20M-Q-SCLCR/L ,6 180 E20M-S-SCLCR/L ,6 250 E25M-R-SCLCR/L ,5 200 E25M-T-SCLCR/L , T308 E32M-U-SCLCR/L : , s used: all CC series (CCGX, CCGT, CCMT, CCGW). E_SCLP R/L Thru Coolant Integral Carbide Solid Boring Bars - Style L - Negative 5 End & Side Cutting Edge Angle for 11 positive 80 diamond CP inserts Right Left Boring Ratio Dia. Min. Bore Length CP E10M-M-SCLPR/L , E12M-K-SCLPR/L , E12M-R-SCLPR/L : , E16M-M-SCLPR/L , E16M-S-SCLPR/L , E12M-K-SCLPR/L , E12M-R-SCLPR/L , E16M-M-SCLPR/L : , T308 E16M-S-SCLPR/L , s used: all CP series (CPGX, CPGT, CPGW, CPMT). E_SDNC R/L Thru Coolant Integral Carbide Boring Bar Style N - Negative 27.5 End & Side Cutting Edge Angle for 7 positive 55 diamond DC inserts E_SDQC R/L Thru Coolant Integral Carbide Solid Boring Bars Style N - Negative 17.5 End Cutting Edge Angle for 7 positive 55 diamond DC inserts Right Right Left Left Boring Ratio Dia. Min. DC Bore Length E10M-M-SDQCR/L , E12M-K-SDQCR/L , E12M-R-SDQCR/L : , E16M-M-SDQCR/L , E16M-S-SDQCR/L , s used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT). Boring Ratio Dia. Min. DC Bore Length E10M-M-SDNCR/L , E12M-K-SDNCR/L , E12M-R-SDNCR/L : , E16M-M-SDNCR/L , E16M-S-SDNCR/L , s used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT) E_SDUC R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive 55 diamond DC inserts E_STUC R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 7 positive triangle TC inserts E_STUP R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 11 positive triangle TP inserts Right Right Right Left Left Boring Ratio Boring Ratio Dia. Dia. Min. Bore Length E10M-M-STUPR/L , E12M-K-STUPR/L , E12M-R-STUPR/L : , E16M-M-STUPR/L , E16M-S-STUPR/L , s used: all TP series (TPMT, TPGT, TPMR, TPGW, TPGH, TPGB, TPHT). Min. Bore Length E07M-H-STUCR/L , E08M-K-STUCR/L :1 8 8, E10M-M-STUCR/L , E10M-M-STUCR/L , E12M-K-STUCR/L , E12M-R-STUCR/L : , E16M-M-STUCR/L , E16M-S-STUCR/L , E20M-Q-STUCR/L ,6 180 TC 06T E20M-S-STUCR/L ,6 250 E25M-R-STUCR/L : , T308 E25M-T-STUCR/L ,5 300 E32M-U-STUCR/L ,3 350 s used: all TC series (TCMT, TCGW, TCGT, TCGX). Left Boring Ratio Dia. Min. DC Bore Length E10M-M-SDUCR/L , E12M-K-SDUCR/L , E12M-R-SDUCR/L : , E16M-M-SDUCR/L , E16M-S-SDUCR/L , E20M-Q-SDUCR/L ,7 180 E20M-S-SDUCR/L ,7 250 E25M-R-SDUCR/L : ,0 200 E25M-T-SDUCR/L ,0 300 E32M-U-SDUCR/L ,5 350 s used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT) T308 E_SDXC R/L Thru Coolant Integral Carbide Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 7 positive 55 diamond DC inserts Right Left Boring Ratio Dia Min. DC Bore Length E10M-M-SDXCR/L ,76 141,36 E12M-K-SDXCR/L ,08 116,36 E12M-R-SDXCR/L : ,08 191, E16M-M-SDXCR/L ,43 141,36 E16M-S-SDXCR/L ,43 241,36 E20M-Q-SDXCR/L ,9 180 E20M-S-SDXCR/L ,9 250 E25M-R-SDXCR/L : ,0 200 E25M-T-SDXCR/L ,0 300 E32M-U-SDXCR/L ,6 350 s used: all DC series (DCMT, DCGW, DCMT, DCGX, DCGT). 11T308 TP Call: Visit: sales@doriantool.com 22

24 E_SVMC R/L Thru Coolant Integral Carbide Boring Bar Style M - Negative 50 Side Cutting Edge Angle for 7 positive 35 diamond VC inserts Right Left Boring Min. VC Ratio Dia. Bore Length E12M-K-SVMCR/L , ,84 E12M-R-SVMCR/L , ,84 6:1 E16M-M-SVMCR/L , , E16M-S-SVMCR/L , ,06 s used: all VC series (VCMT, VCGT, VCGW, VCGX). E_SVXP R/L Thru Coolant Integral Carbide Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 11 positive 35 diamond VP inserts s used: all VP series (VPMT, VPGT). Right Left Boring Ratio Dia. Min. VP Bore Length E16M-M-SVXPR/L ,4 143,90 6: E16M-S-SVXPR/L ,4 143,90 E_SVQC R/L Thru Coolant Integral Carbide Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 7 positive 35 diamond VC inserts Right Left E16M-M-SVQCR/L Boring Ratio 6:1 Dia. Min. Bore Length 16 21, E16M-S-SVQCR/L , s used: all VC series (VCMT, VCGT, VCGW, VCGX) VC E_SVUC R/L Thru Coolant Integral Carbide Boring Bar Style Q - Negative 3 End Cutting Edge Angle for 7 positive 35 diamond VC inserts Right Left Boring Ratio Dia. Min. Bore Length E16M-M-SVUCR/L , :1 E16M-S-SVUCR/L , s used: all VC series (VCMT, VCGT, VCGW, VCGX). VC E_SWLC R/L Thru Coolant Integral Carbide Boring Bar Style L - Negative 5 End Cutting Edge Angle for 7 positive 80 trigon WC inserts s used: all WC series (WCMT, WCGT). Right Left Boring Ratio D Min. WC Bore Length E05M-H-SWLCR/L , E06M-H-SWLCR/L , :1 E07M-H-SWLCR/L , S20101 E08M-K-SWLCR/L , E10M-M-SWLCR/L , E12M-K-SWLCR/L , E12M-R-SWLCR/L : , E16M-M-SWLCR/L , E16M-S-SWLCR/L , E12M-K-SWLCR/L , E12M-R-SWLCR/L , E16M-M-SWLCR/L , E16M-S-SWLCR/L , :1 E20M-Q-SWLCR/L , T308 E20M-S-SWLCR/L ,6 250 E25M-R-SWLCR/L ,5 200 E25M-T-SWLCR/L ,5 300 E32M-U-SWLCR/L : , E_SVXC R/L Thru Coolant Integral Carbide Boring Bar Style X - Negative 5 Back Boring Cutting Edge Angle for 7 positive 35 diamond VC inserts Right Left Boring Ratio Dia. Min. Bore Length VC E16M-M-SVXCR/L ,40 143,90 6: E16M-S-SVXCR/L ,40 143,90 s used: all VC series (VCMT, VCGT, VCGW, VCGX). E_SVQP R/L Thru Coolant Integral Carbide Boring Bar Style Q - Negative 17.5 End Cutting Edge Angle for 11 positive 35 diamond VP inserts s used: all VP series (VPMT, VPGT). E_SVUP R/L Thru Coolant Integral Carbide Boring Bar Style U - Negative 3 End Cutting Edge Angle for 11 positive 35 diamond VP inserts Right Right Left E16M-M-SVQPR/L Left Boring Ratio Boring Ratio Dia. Dia. Min. VP Bore Length VP Min. Bore Length E16M-M-SVUPR/L : , E16M-S-SVUPR/L : , : , E16M-S-SVQPR/L , E_SN R/L Thru Coolant Integral Carbide Threading Bar Internal Laydown Bar for Laydown s Right Left Threading Ratio Dia. Min. Laydown Bore Length E06M-H-SNR/L , A60 E07M-H-SNR/L , E08M-K-SNR/L , A60 E10M-M-SNR/L-H , :1 E12M-K-SNR/L-H , A60 E12M-R-SNR/L-H , E16M-M-SNR/L-H , E16M-S-SNR/L-H , A60 E_NE R/L Thru Coolant Integral Carbide Solid Threading & Grooving Bar- Style E- Internal DorNotch Bar for threading and grooving DorNotch inserts Threading Grooving Right Left Threading Ratio* Dia. Dor- Min. Bore Length Notch E12M-K-NER/L ,08 128,05 E12M-R-NER/L ,08 203,05 E16M-M-NER/L , :1 E16M-S-NER/L , E20M-Q-NER/L ,6 180 E20M-S-NER/L ,6 250 *or right hand tool. ** or left hand tool *NG-2L **NG-2R s used: all VP series (VPMT, VPGT). 23 Call: Visit: sales@doriantool.com

25 E_ADCLN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style L- Negative 5º side & end cutting lead angle for negative 80º diamond CN inserts Right Left E25M-R-ADCLNR/L Boring Ratio Dia. Min. Bore Length 25 32,5 200 E25M-T-ADCLNR/L : ,5 300 E32M-U-ADCLNR/L ,9 350 s used: all CN series (CNMG, CNMP, CNGG, CNMX, CNMM, CNMA). CN E_ADWLN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style L - Negative 5º end & side cutting lead angle for negative 80º trigon WN inserts Right Left E25M-R-ADWLNR/L Boring Ratio Dia. Min. Bore Length 25 32,5 200 E25M-T-ADWLNR/L : ,5 300 E32M-U-ADWLNR/L ,9 350 WN s used: all WN series (WNMG, WNMA, WNGG, WNGP). E_ADTUN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style U- Negative 3º end cutting lead angle for negative triangle TN inserts Right Left E25M-R-ADTUNR/L Boring Ratio Dia. Min. Bore Length 25 32,5 200 E25M-T-ADTUNR/L : ,5 300 E32M-U-ADTUNR/L ,9 350 s used: all TN series (TNMG, TNMP, TNMX, TNMA). TN E-ADNE R/L Thru Coolant Jet-Stream Carbide Threading Bar Style E- or DorNotch Threading s Right Left E25M-R-ADNER/L Threading Ratio Dia. Min. Bore Length 25 35,1 200 Dor- Notch E25M-T-ADNER/L : ,1 300 NG-3L* NG-3R** E_ADDUN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style U- Negative 3º end cutting lead angle for negative 55º diamond DN inserts Right Left Boring Ratio Dia. Min. Bore Length E25M-R-ADDUNR/L , :1 E25M-T-ADDUNR/L ,0 300 DN E32M-U-ADDUNR/L : , s used: all DN series (DNMG, DNMP, DNMX, DNMA, DNGG). * or right hand bar ** or left hand bar E32M-U-ADNER/L ,5 350 E-ADLN R/L Thru Coolant Jet-Stream Carbide Threading Bar Style N- for LayDown Threading s Right Left E20M-Q-ADLNR/L Threading Ratio Dia. Min. Bore Length 20 28,4 180 Lay- Down E_ADDPN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style P- Negative 27.5 end cutting lead angle for negative 55º diamond DN inserts Right Left Boring Ratio Dia. Min. Bore Length E25M-R-ADDPNR/L , :1 E25M-T-ADDPNR/L ,1 300 DN E32M-U-ADDPNR/L : , s used: all DN series (DNMG, DNMP, DNMX, DNMA, DNGG). E20M-S-ADLNR/L ,4 250 E25M-R-ADLNR/L , :1 E25M-T-ADLNR/L ,9 300 E32M-U-ADLNR/L ,1 350 E32M-U-ADLNR/L ,5 350 * or right hand bar ** or left hand bar 16- G N60 E_ADVUN R/L Thru Coolant Jet-Stream Carbide Boring Bar Style U - Negative 3º side cutting lead angle for negative 35º diamond VN inserts Right Left Boring Ratio Dia. Min. Bore Length VN Gage E32M-U-ADVUNR/L : , s used: all VN series (VNMG, VNMA, VNMP, VNGG). Call: Visit: sales@doriantool.com 24

26 High Performance Quick Change Carbide Boring Bars Body & Boring Heads for Multi Boring and Threading Operation 1 SCLC R/L Quick Change Boring Bar Head With Thru Coolant 2 SDNC R/L Quick Change Boring Bar Head With Thru Coolant 3 SDQC R/L Quick Change Boring Bar Head With Thru Coolant 4 SDUC R/L Quick Change Boring Bar Head With Thru Coolant 9 Interchangeable Heads 5 SDXC R/L Quick Change Boring Bar Head With Thru Coolant 6 STUC R/L Quick Change Boring Bar Head With Thru Coolant One Quick Change Carbide Body 7 SVUC R/L Quick Change Boring Bar Head With Thru Coolant Note: Quick Change Boring Heads will fit the Quick Change Carbide Boring Bar Body, and the Solution Tool Quick Change Boring Bar Body. or technical information see pages 34 and SWLC R/L Quick Change Boring Bar Head With Thru Coolant 9 SN R/L Quick Change Threading Bar Head With Thru Coolant 25 Call: Visit: sales@doriantool.com

27 Thru Coolant Quick Change Carbide Boring Bar Body C1 1/8 NPT D C3 L (Max. Depth of Bore / Boring Ratio) C C2 (Holding Area) Boring Bar Center Line H 1 Boring Head Center Line Bar Neutral Boring Ratio Construction Bar Dia. Actual Min. Bore B 1 H L C C1 C2 C3 C4 Quick CHange Head AE20M-Q-QCCBB x Dia. AE25M-R-QCCBB AE20M-S-QCCBB Carbide Body H + (1/2 Bar Dia) Note: Leave enough 1=+H 2, AE25M-T-QCCBB x Dia. 25 room for chip evacuation 2, DBOMH-12/20M DBOMH-12/20M AE32M-U-QCCBB x Dia. Boring Ratio can be achieved under favorable conditions. Call: Visit: sales@doriantool.com 26

28 Solution Tool! THE NO! VIBRATION RE-TUNABLE BORING BAR Makes Deep Hole Boring Simple! Solution Tool! TM Makes Deep Hole Boring Simple! 27 Call: Visit:

29 Solution Tool! The No! Vibration Re-Tunable Threading & Boring Bar OUTPERORMS THE BEST To maximize performance in deep boring operations, Solution Tool! is offered in 2 versions: Steel Body: The steel body for boring depth up to 12 x Boring Bar Diameter Carbide Body: The carbide body rigidity and stability, allows to bore at higher cutting rate and material removal, and longer depth of cut up to 14xD. Wave Lenght requency Chart of Solution Tool! Tuned Boring Bar ms (millisecond) Time Boring Bar TUNED - TESTED - CERTIIED Ready to Operate Re-tunable Key When to Re-tune the Bar? Re-tune to optimize the Bar performance How The Solution Tool! The NO! Vibration Re-Tunable Boring Bar Works? The Solution Tool! is dynamically tuned, tested and certified to meet Dorian Tool Quality control standards and performance and ready to be used. Re-Tuning The Solution Tool! Can be re-tuned on the machine to optimize the boring bar performance when: Extreme and exotic materials change from very soft to very hard. Thin wall material Changing the boring depth. Ex: a boring bar with a 12 x Dia. Boring Ratio will be used for a shorter boring Ratio like 6 x Dia.. Improving performance for specific machining operations such as finishing, roughing boring, threading, and grooving. Call: Visit: sales@doriantool.com 28

30 Solution Tool! The No! Vibration Re-Tunable Boring Bar BEST Split Collar Holding System Boring Bar Holding System Locks the boring bar at 360º on the diameter, assuring the most rigid and precise boring bar positioning Without scarring or damaging the bar surface. 100% Rigidity! 360º Locking orce 4 x Dia. Holding Area Locking Screw Split Collar Boring Bar Holder GOOD Split Bushing Holding System With a solid boring bar holder The split bushing embraces the boring bar at 360º on the diameter. The boring bar holder screws will squeeze the bushing around the boring bar Without scarring or damaging the bar surface with precise positioning. 80% Rigidity! Vertical Locking orce Locking Screw DO NOT USE IT Set Screw Lock Holding System Solid boring bar holder Without bushing Never lock the screws directly on the boring bar. Locking a screw over the boring bar will create only one point of contact causing very poor rigidity. Additionally, the screw will damage the boring bar surface and make positioning difficult. STOP! Do not Use it Split Bushing 4 x Dia. Holding Area 4 x Dia. Holding Area Split Bushing Solid Boring Bar Holder Locking Screw Set Screw Lock Solid Boring Bar Holder Center Line Set-Up Due to the cutting pressure placed on the insert during deep boring, the bar flexes downward. Place the insert cutting edge above the center line by 10% of bar diameter to compensate bar deflection and to reduce vibration. Example: 1 inch bar 1% =.010 z Important Recommendations or a Roughing operation with a large depth of cut and a high feed rate, low RPM is recommended. or a inishing operation with a small depth of cut and a low feed rate, high RPM is recommended. Minimum depth of cut is 1/2 of the insert radius. Maximum feed rate is 1/2 of the insert radius. When wrong cutting parameters are used for the specific material to be bored, and for the operation to be executed, the boring bar will not perform properly, generating poor surface finish and/ or vibration. Maximum Boring & Threading Ratio for Steel, Carbide and Solution Tool! Boring Bars Steel Bars 4 x Dia. Boring Ratio 2 x Dia. Threading & Grooving Ratio General boring bar applications Roughing to inishing 4 x Dia. Boring Ratio 2 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder Carbide Bars 6 x Dia. Boring Ratio 3 x Dia. Threading & Grooving Ratio Best for boring small holes Split Boring Bar Holder Rigid for close tolerances and good surface finish Rigid for heavy material removal at high depth of cut and feed rate. 6 x Dia. Boring Ratio 3 x Dia. Threading Ratio 4 x Dia. Holding Area Solution Tool! (Steel Body) 8 x Dia., 10 x Dia., 12 x Dia. Boring Ratio 4 x Dia. Threading & Grooving Ratio or deep hole boring applications 8,10 & 12 x Dia. Boring Ratio 4 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder Solution Tool! (Carbide Body) 8 x Dia., 10 x Dia., 12 x Dia., 14 x Dia. Boring Ratio 5 x Dia. Threading & Grooving Ratio High performance deep hole boring applications for higher material removal rate. 8,10,12 & 14 x Dia. Boring Ratio 5 x Dia. Threading Ratio 4 x Dia. Holding Area Split Boring Bar Holder 29 Call: Visit: sales@doriantool.com

31 Solution Tool! THE NO! VIBRATION RE-TUNABLE BORING BAR for THREADING & HEAVY DUTY BORING Integral Threading & Boring 12mm X 6 Dia. 16mm X 6 Dia. Quick Change Threading & Boring 20mm X 6 Dia. 25mm X 6 Dia. 32mm X 6 Dia. Modular Jet-Stream Threading & Boring 40mm X 6 Dia. 50mm X 6 Dia. 60mm X 6 Dia. 60mm X 6 Dia. 80mm X 6 Dia. 100mm X 6 Dia. Will fit all the Quick Change Boring Heads on page Will fit all the Modular Boring Heads on page Call: Visit: sales@doriantool.com 30

32 Solution Tool! The No! Vibration Re-Tunable Integral Threading & Heavy Duty Boring NEW 4-6 x Dia. Boring Bar Center Line L (Depth of Bore / Boring & Threading Range) C2 (Holding Area) D Not thru coolant C Boring & Bar Actual Holding Threading Ratio Construction Dia. Min. Bore Bar R.H. L.H. Ratio D B L C C2 Gage Screw STM12X-06-ITBNL-11-CB to to A60 TS M2 4 to 6 x Dia. 6 to 4 Carbide Body STM16X-06-ITBNL CB to to G60 TS M1 Solution Tool! The No! Vibration Re-Tunable Quick Change Threading & Heavy Duty Boring NEW 4-6 x Dia. Boring Bar Center Line 1 Threading Head Center Line H C3 C1 C4 L (Depth of Bore / Boring & Threading Range) C C2 (Holding Area) 1/8 NPT D Thru coolant Threading Bar Actual Holding Boring Ratio Construction Dia. Min. Bore Bar R.H. L.H. Ratio D B 1 H L C C1 C2 C3 C4 Threading Head STM20X-06-QTB120-SB H + (1/2 Bar Dia) 0 80 to to STM25X-06-QTB150-SB to 6 x Dia. 4 to 2 Steel Body 25 Note: 1=+H to to Leave enough STM32X-06-QTB200-SB room for chip evacuation to to DBOMH-12/20M-SNR/L-16 Solution Tool! The No! Vibration Re-Tunable Modular Jet-Stream Threading & Heavy Duty Boring C1 Boring Bar Center Line NEW 4-6 x Dia. 1 Threading Head Center Line H C3 C4 L (Depth of Bore / Boring & Threading Range) C C2 (Holding Area) 1/2 NPT D Thru coolant Bar Actual Boring Holding Bar R.H. Ratio Ratio Construction Dia. Min. Bore D B 1 H L C C1 C2 C3 C4 Threading Head STM40X-06-MTB360-SB to to B= + H + DBOMH-24/40M-ADLNR/L-16 STM50X-06-MTB450-SB (1/2 Bar Dia) to to DBOMH-24/40M-ADLNR/L-22 STM60X-06-MTB540-SB to 6 x Dia. 4 to 2 Steel Body 60 Note: 1=+H to to DBOMH-24/40M-ADLNR/L-27 Leave enough DBOMH-24/40M-ADNER/L-3 STM80X-06-MTB720-SB room for chip to to evacuation DBOMH-24/40M-ADTHOR/L-4 STM100X-06-MTB900-SB to to Call: Visit: sales@doriantool.com

33 Solution Tool! The No! Vibration Re-Tunable Integral Boring Bar Small Diameters 12mm and 16mm L ( Max. Depth of Bore / Boring Ratio) C C2 ( Holding Area) D Not thru coolant Deep hole boring made simple 8xD, 10xD, 12xD and 14xD boring (overhang) ratios or high material removal rate, high surface finish and tight tolerances Bars are pre-tuned at the factory to the specific boring ratio Bars can be Re-tuned on the machine to optimize boring performance in challenging application Min Bore (B) in the charts below includes chip clearance. Actual minimum bore = + (1/2 Bar Dia.) Always allow enough room for chip evacuation. B B B B B B B B B Boring Bar Dia. Min. Bore Gage Bar R.H. L.H. Ratio Construction D B C L C2 CC Screw DVM10X-08-SCLCR-06-CB SCLC , TS M2 DVM12X-08-SCLCR/L-06-CB x Dia , TS M2 DVM16X-08-SCLCR/L-09-CB , T304 TS-4.7-8M1 DVM10X-10-SCLCR-06-CB , TS M2 DVM12X-10-SCLCR/L-06-CB x Dia , TS M2 DVM16X-10-SCLCR/L-09-CB , T304 09T304 Carbide Body DVM10X-12-SCLCR-06-CB , TS M2 SDUC DVM12X-12-SCLCR/L-06-CB x Dia , TS M2 DVM16X-12-SCLCR/L-09-CB , T304 TS-4.7-8M1 DVM10X-14-SCLCR-06-CB , TS M2 SCLC DVM12X-14-SCLCR/L-06-CB xdia , TS M2 DVM16X-14-SCLCR/L-09-CB , T304 TS-4.7-8M1 B Boring Bar Dia. Min. Bore Bar R.H. L.H. Ratio Construction D B C L C2 SDNC DVM10X-08-SDUCR-07-CB SDUC SDNC DVM12X-08-SDUCR/L-07-CB x Dia DVM16X-08-SDUCR/L-07-CB DVM10X-10-SDUCR-07-CB SCLC DVM12X-10-SDUCR/L-07-CB x Dia DVM16X-10-SDUCR/L-07-CB Carbide Body DVM10X-12-SDUCR-07-CB DVM12X-12-SDUCR/L-07-CB SDXC x Dia DVM16X-12-SDUCR/L-07-CB B SDNC DVM10X-14-SDUCR-07-CB SCLC SDUC SDNC DVM12X-14-SDUCR/L-07-CB x Dia DVM16X-14-SDUCR/L-07-CB Gage DC Screw TS M TS M TS M TS M2 B B B B B B B B B B B Boring 27.5 Bar Dia. Min. Bore Bar R.H. B Ratio Construction D B C L C2 DVM10X-08-SDNCR-07-CB B SDXC DVM12X-08-SDNCR-07-CB x Dia DVM16X-08-SDNCR-07-CB DVM10X-10-SDNCR-07-CB SDNC DVM12X-10-SDNCR-07-CB x Dia DVM16X-10-SDNCR-07-CB Carbide Body DVM10X-12-SDNCR-07-CB DVM12X-12-SDNCR-07-CB x Dia B DVM16X-12-SDNCR-07-CB DVM10X-14-SDNCR-07-CB SDNC DVM12X-14-SDNCR-07-CB x Dia. 12 SDXC DVM16X-14-SDNCR-07-CB SCLC SDUC STUC SDXC SDNC SDUC STUC SDNC SDXC Boring 27.5 Bar Dia. Min. Bore Bar R.H. B Ratio Construction D B C L C2 DVM10X-08-SDXCR-07-CB DVM12X-08-SDXCR-07-CB x Dia. B 12 SDNC DVM16X-08-SDXCR-07-CB DVM10X-10-SDXCR-07-CB SDXC DVM12X-10-SDXCR-07-CB x Dia DVM16X-10-SDXCR-07-CB Carbide Body 5 DVM10X-12-SDXCR-07-CB DVM12X-12-SDXCR-07-CB x Dia DVM16X-12-SDXCR-07-CB B DVM10X-14-SDXCR-07-CB SDXC DVM12X-14-SDXCR-07-CB x Dia DVM16X-14-SDXCR-07-CB SDNC SDXC STUC SDXC STUC Boring Bar Dia. Min. Bore Bar R.H. L.H. Ratio Construction D B C L C2 DVM10X-08-STUCR-11-CB B STUC DVM12X-08-STUCR/L-11-CB x Dia SDXC DVM16X-08-STUCR/L-11-CB DVM10X-10-STUCR-11-CB DVM12X-10-STUCR/L-11-CB x Dia DVM16X-10-STUCR/L-11-CB Carbide Body DVM10X-12-STUCR-11-CB DVM12X-12-STUCR/L-11-CB x Dia DVM16X-12-STUCR/L-11-CB DVM10X-14-STUCR-11-CB DVM12X-14-STUCR/L-11-CB x Dia DVM16X-14-STUCR/L-11-CB Gage DC Screw TS M TS M TS M TS M2 Gage DC Screw TS M TS M TS M TS M2 Gage TC Screw TS M TS M TS M TS M2 Call: Visit: sales@doriantool.com 32

34 Solution Tool! The No! Vibration Re-Tunable Quick Change Boring Bar Medium Diameters 20mm, 25mm and 32mm C1 Thru coolant 1/8 NPT D C3 C4 L ( Max. Depth of Bore / Boring Ratio) C C2 (Holding Area) Deep hole boring made simple 8xD, 10xD, 12xD and 14xD boring (overhang) ratios or high material removal rate, high surface finish and tight tolerances Bars are pre-tuned at the factory to the specific boring ratio Bars can be Re-tuned on the machine to optimize boring performance in challenging application Boring Bar Center Line 1 H Boring Head Center Line See page Bar Neutral Boring Ratio Holding Ratio Construction Bar Dia. D Actual Min. Bore B 1 H L C C1 C2 C3 C4 Quick Change Head Coolant Attachment Thread DVM20X-08-MQBBN-0240-SB Steel Body DVM20X-08-MQBBN-0240-CB Carbide Body 20 B= + H (1/2 Bar Dia) DVM25X-08-MQBBN-0300-SB Steel Body x Dia. 4 Note: 1=+H DVM25X-08-MQBBN-0300-CB Carbide Body 25 Leave enough room for chip DVM32X-08-MQBBN-0384-SB Steel Body 32 evacuation DVM32X-08-MQBBN-0384-CB Carbide Body DBOMH-12/20M 1/8-27 NPT DVM20X-10-MQBBN-0280-SB Steel Body DVM20X-10-MQBBN-0280-CB Carbide Body 20 B= + H (1/2 Bar Dia) DVM25X-10-MQBBN-0350-SB Steel Body x Dia. 4 Note: 1=+H DVM25X-10-MQBBN-0350-CB Carbide Body 25 Leave enough room for chip DVM32X-10-MQBBN-0448-SB Steel Body 32 evacuation DVM32X-10-MQBBN-0448-CB Carbide Body DBOMH-12/20M 1/8-27 NPT DVM20X-12-MQBBN-0320-SB Steel Body DVM20X-12-MQBBN-0320-CB Carbide Body 20 B= + H (1/2 Bar Dia) DVM25X-12-MQBBN-0400-SB Steel Body x Dia. 4 Note: 1=+H DVM25X-12-MQBBN-0400-CB Carbide Body 25 Leave enough room for chip DVM32X-12-MQBBN-0512-SB Steel Body 32 evacuation DVM32X-12-MQBBN-0512-CB Carbide Body DBOMH-12/20M 1/8-27 NPT DVM20X-14-MQBBN-0360-CB Carbide Body 20 B= + H + (1/2 Bar Dia) DVM25X-14-MQBBN-0450-CB x Dia. 4 Carbide Body 25 Note: Leave enough 1=+H DVM32X-14-MQBBN-0576-CB Carbide Body 32 room for chip evacuation DBOMH-12/20M 1/8-27 NPT 33 Call: Visit: sales@doriantool.com

35 Boring Heads for Solution Tool! Quick Change Boring Bar 20 to 32mm Positive Boring Head Specification Head R.H. L.H. Reference Bar Dia. B E K Gage Torx Torx Key Locking Head Screw mm º 0 DBOMH-12/20M-SCLCR/L º CC_W 09T308 TS M1 T-15 QCHLS-3MCS K E B Thru Coolant Right Shown Left Opposite º mm º 0 DBOMH-12/20M-SCLPR º DC_W 09T308 TS M1 T-15 QCHLS-3MCS K E B Thru Coolant Right Shown Left Opposite º mm º DBOMH-12/20M-SDNCR/L º DC_W 11T308 TS M1 T-15 QCHLS-3MCS K E B Thru Coolant Right Shown Left Opposite º 17.5º mm DBOMH-12/20M-SDQCR/L º º DC_W TS M2 T-8 QCHLS-3MCS º º E B Thru Coolant Right Shown Left Opposite DBOMH-12/20M-SDQCR/L º º DC_W 11T308 TS M1 T-15 QCHLS-3MCS 3º mm DBOMH-12/20M-SDUCR/L º º DC_W TS M2 T-8 QCHLS-3MCS 0º º º Kº E B Thru Coolant Right Shown Left Opposite DBOMH-12/20M-SDUCR/L º º DC_W 11T308 TS M1 T-15 QCHLS-3MCS 0º 5º E mm Thru Coolant Right Shown Left Opposite B Kº DBOMH-12/20M-SDXCR/L º º º Call: Visit: sales@doriantool.com 34 DC_W 11T308 TS M1 T-15 QCHLS-3MCS

36 Boring Heads for Solution Tool! Quick Change Boring Bar 20 to 32mm Positive Boring Head Specification Head R.H. L.H. Reference Bar Dia. B E K Gage Torx Torx Key Locking Head Screw 3º mm DBOMH-12/20M-STUCR/L º º TC_W TS M2 T-8 QCHLS-3MCS º 0º º Kº E B Thru Coolant Right Shown Left Opposite DBOMH-12/20M-STUCR/L º º TC_W 16T308 TS M1 T-15 QCHLS-3MCS 3º mm º 0º DBOMH-12/20M-SVUCR/L º VC_W TS M2 T-8 QCHLS-3MCS Kº E B Thru Coolant Right Shown Left Opposite º 5º mm º 0º DBOMH-12/20M-SWLCR/L º WC_W 06T308 TS M1 T-15 QCHLS-3MCS Kº E B Thru Coolant Right Shown Left Opposite º Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E Gage Torx Torx Key Locking Head Screw mm DBOMH-12/20M-SNR/L Laydown 16-A60 TS M1 T-15 QCHLS-3MCS E B Thru Coolant Right Shown Left Opposite Call: Visit: sales@doriantool.com

37 Solution Tool! The No! Vibration Re-Tunable Modular Jet-Stream TM Boring Bar Diameters 40mm, 50mm, 60mm, 80mm and 100mm C1 Thru coolant 1/2 NPT D C3 C4 L ( Max. Depth of Bore / Boring Ratio) C2 ( Holding Area) Deep hole boring made simple 8xD, 10xD and 12xD boring (overhang) ratios or high material removal rate, high surface finish and tight tolerances Bars are pre-tuned at the factory to the specific boring ratio Bars can be Re-tuned on the machine to optimize boring performance in challenging applications C Boring Bar Center Line 1 H Boring Head Center Line See page Bar Neutral Boring Ratio Holding Ratio Construction Bar Dia. D Actual Min. Bore B 1 H L C C1 C2 C3 C4 Modular Head Coolant Attachment Thread ASM40X-8-DVI-MBBB-0480-SB Steel Body B= + H + ASM50X-8-DVI-MBBB-0600-SB Steel Body 50 (1/2 Bar Dia) ASM60X-8-DVI-MBBB-0720-SB x Dia. 4 Steel Body 60 Note: 1=+H Leave enough ASM80X-8-DVI-MBBB-0960-SB Steel Body 80 room for chip evacuation ASM100X-8-DVI-MBBB-1200-SB Steel Body DBOMH24/40_A_R/L 1/4-18 NPT ASM40X-10-DVI-MBBB-0560-SB Steel Body B= + H + ASM50X-10-DVI-MBBB-0700-SB Steel Body 50 (1/2 Bar Dia) ASM60X-10-DVI-MBBB-0840-SB x Dia. 4 Steel Body 60 Note: 1=+H Leave enough ASM80X-10-DVI-MBBB-1120-SB Steel Body 80 room for chip evacuation ASM100X-10-DVI-MBBB-1400-SB Steel Body DBOMH24/40_A_R/L 1/4-18 NPT ASM40X-12-DVI-MBBB-0640-SB Steel Body B= + H + ASM50X-12-DVI-MBBB-0800-SB Steel Body 50 (1/2 Bar Dia) ASM60X-12-DVI-MBBB-0960-SB x Dia. 4 Steel Body 60 Note: 1=+H Leave enough ASM80X-12-DVI-MBBB-1280-SB Steel Body 80 room for chip evacuation ASM100X-12-DVI-MBBB-1600-SB Steel Body DBOMH24/40_A_R/L 1/4-18 NPT ASM40X-14-DVI-MBBB-0720-CB Carbide Body 40 B= + H ASM50X-14-DVI-MBBB-0900-CB Carbide Body 50 (1/2 Bar Dia) ASM60X-14-DVI-MBBB-1080-CB x Dia 4 Carbide Body 60 Note: 1=+H Leave enough ASM80X-14-DVI-MBBB-1440-CB Carbide Body 80 room for chip evacuation ASM100X-14-DVI-MBBB-1800-CB Carbide Body DBOMH24/40_A_R/L 1/4-18 NPT Call: Visit: sales@doriantool.com 36

38 Boring Heads for Solution Tool! Modular Jet-Stream TM Boring Bar 40 to 100mm Negative Boring Head Specification 5º Head R.H. L.H. Reference Bar Dia. B E K Gage Seat Seat Screw Jet-Stream TM Clamp Clamp Screw Locking Head Screw for 40mm Boring Bar 50 to 100mm Boring Bar ,1mm DBOMH-24/40M-ADCLNR/L / CN_ W DC-432 TS M1 JSLC-HPCTW-4N JSCS-04 7º MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Right Shown Left Opposite DBOMH-24/40M-ADCLNR/L / CN_W DC-533 TS M1 JSLC-HPC5 JSCS º ,1mm 7º DBOMH-24/40M-ADDQNR/L / DN_W DD-422 TS M2 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Right Shown Left Opposite 27.5º ,1mm DBOMH-24/40M-ADDNNR / DBOMH-24/40M-ADDNNR / DN_W DD-422 TS M2 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Right Shown Left Opposite DBOMH-24/40M-ADDNNR / ,1mm DBOMH-24/40M-ADDXNR / º 7º Kº DBOMH-24/40M-ADDXNR / DN_W DD-422 TS M2 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS E B Thru Coolant Right Shown Left Opposite DBOMH-24/40M-ADDXNR / º ,1mm 7º DBOMH-24/40M-ADDUNR/L / DN_W DD-422 TS M2 JSLC-HPD4 JSCS-04 MHLS-5MCS MHLS-6MCS E Right Shown Left Opposite B Thru Coolant Kº 3º ,1mm DBOMH-24/40M-ADTUNR/L / TN_W DT-322 TS M1 JSLC- HPDT3-BR/L JSCS-03 7º MHLS-5MCS MHLS-6MCS E B Thru Coolant Kº DBOMH-24/40M-ADTUNR/L / TN_W DT-432 TS M1 JSLC- HPTW-4R/L JSCS-04 Right Shown Left Opposite 37 Call: Visit: sales@doriantool.com

39 Boring Heads for Solution Tool! Modular Jet-Stream TM Boring Bar 40 to 100mm Negative Boring Head Specification 3º Head R.H. L.H. Reference Bar Dia. B E K Gage Seat Seat Screw Jet-Stream TM Clamp Clamp Screw Locking Head Screw for 40mm Boring Bar 50 to 100mm Boring Bar 38,1mm 7º DBOMH-24/40M-ADVUNR/L / VN_W DV-322 TS M1 JSLC-HPV3 JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Right Shown Left Opposite 5º ,1mm 7º DBOMH-24/40M-ADWLNR/L / WN_W DW-432 TS M1 JSLC- HPTW-4R/L JSCS-04 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Right Shown Left Opposite Positive Boring Head Specification 5º Head R.H. L.H. Reference Bar Dia. B E K Gage Screw Torx Key Locking Head Screw for 40mm Boring Bar 50 to 100mm Boring Bar 38,1mm 0º DBOMH-24/40M-ASCLCR/L / CC_W TS M1 T-20 MHLS-5MCS MHLS-6MCS E B Kº Thru Coolant Right Shown Left Opposite 17.50º ,1mm DBOMH-24/40M-ASDQCR/L / DC_W 11T308 TS M1 T-15 7º MHLS-5MCS MHLS-6MCS B Kº E DBOMH-24/40M-ADSQCR/L / DC_W TS M1 T-20 Thru Coolant Right Shown Left Opposite 3º ,1mm DBOMH-24/40M-ASDUCR/L / DC_W 11T308 TS-4.7-8M1 T-15 0º MHLS-5MCS MHLS-6MCS E B Kº DBOMH-24/40M-ASDUCR/L / DC_W TS M1 T-20 Thru Coolant Right Shown Left Opposite 5º mm DBOMH-24/40M-ASDXCR/L / DC_W 11T308 TS M1 T-15 MHLS-5MCS MHLS-6MCS E B Thru Coolant Right Shown Left Opposite Call: Visit: sales@doriantool.com 38

40 Boring Heads for Solution Tool! Modular Jet-Stream TM Boring Bar 40 to 100mm Positive Boring Head Specification 3º ,1mm Head R.H. L.H. Reference Bar Dia. B E K DBOMH-24/40M-ASTUCR/L / Gage TC_W 16T308 Screw Torx Key TS-4.7-8M1 T-15 Locking Head Screw for 40mm Boring Bar 50 to 100mm Boring Bar 0º Kº MHLS-5MCS MHLS-6MCS E B Thru Coolant DBOMH-24/40M-ASTUCR/L / TC_W TS M1 T-20 Right Shown Left Opposite 3º ,1mm 0º DBOMH-24/40M-ASVUCR/L / VC_W TS-4.7-8M1 T-15 MHLS-5MCS MHLS-6MCS Kº E B Thru Coolant Right Shown Left Opposite Laydown Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E Gage Seat Seat Screw Chip lush Nozzle Locking Head Screw for 40mm 50 to 100mm Boring Bar Boring Bar mm DBOMH-24/40M-ADLNR/L / Laydown 16-A60 GXE/I-16 TS M1 JSPN-M6 MHLS-5MCS MHLS-6MCS DBOMH-24/40M-ADLNR/L / Laydown 22-N60 NXE/I-22 TS M1 JSPN-M6 E B Thru Coolant Right Shown Left Opposite DBOMH-24/40M-ADLNR/L / Laydown 27-Q60 VXE/I-27 TS M1 JSPN-M6 MHLS-5MCS MHLS-6MCS DorNotch Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E Gage Jet-Stream TM Clamp Clamp Screw Chip lush Nozzle Locking Head Screw for 40mm 50 to 100mm Boring Bar Boring Bar ,1mm DBOMH-24/40M-ADNER/L / DorNotch NG-3L* NG-3R** JSLC-HP73* JSLC-HP72** JSCS-04 JSPN-M6 MHLS-5MCS MHLS-6MCS E B Thru Coolant Right Shown Left Opposite On edge Threading Head Specification Head R.H. L.H. Reference Bar Dia. B E Gage Jet-Stream TM Clamp Clamp Screw Chip lush Nozzle Locking Head Screw for 40mm 50 to 100mm Boring Bar Boring Bar ,1mm DBOMH-24/40M-ADTHOR/L / TN_W GTS-2 T-20 JSPN-M6 MHLS-5MCS MHLS-6MCS E B Thru Coolant Right Shown Left Opposite 39 Call: Visit: sales@doriantool.com

41 KOOL CUT TM MODULAR TURNING & GROOVING SYSTEM Double Jet Coolant System KOOL Cut TM Modular Turning & Grooving Built for Productivity! Interchangeable Shanks & Cartridges Technology Call: Visit:

42 Right KOOL Cut Modular Turning and Grooving Straight Tool holder Style Shank D A C3 C1 C C2 Right Shank Shown B (2) 1/8 NPT Coolant Inlets R.H. Shank Shank Size A B D C C1 C2 C3 ADDN-MTR-2020-C mm ADDN-MTR-2525-D mm ADDN-MTR-3232-E mm Left KOOL Cut Modular Turning and Grooving Straight Tool holder Style Shank A D C2 C C3 C1 Left Shank Shown B (2) 1/8 NPT Coolant Inlets L.H. Shank Shank Size A B D C C1 C2 C3 ADDN-MTL-2020-C mm ADDN-MTL-2525-D mm ADDN-MTL-3232-E mm Call: Visit: sales@doriantool.com

43 Right KOOL Cut Modular Turning and Grooving 90 Gang Tool holder Style Shank C1 C C2 A D E (2) 1/8 NPT Coolant Inlets B Right Shank Shown R.H. Shank Shank Size A B D E C C1 C2 C3 ADDN-MGR-2020-C mm ADDN-MGR-2525-D mm ADDN-MGR-3232-E mm Left KOOL Cut Modular Turning and Grooving 90 Gang Tool holder Style Shank E D A C1 C C2 Left Shank Shown B (2) 1/8 NPT Coolant Inlets L.H. Shank Shank Size A B D E C C1 C2 C3 ADDN-MGL-2020-C mm ADDN-MGL-2525-D mm ADDN-MGL-3232-E mm Call: Visit: sales@doriantool.com 42

44 Right Cartridge KOOL Cut Modular Turning Grooving for Right Tool holder Pitch Line Size T Max L W 2mm Size Right Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TR , Hex Key Coolant Seal DNTQ EU-N ADKDN-TR , DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 ADKDN-TR , Right Cartridge Shown Pitch Line Size T Max L W 3mm Size Right Cartridge KOOL Cut Modular Turning & Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TR , Hex Key Coolant Seal DNTQ EU-N ADKDN-TR , DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 DNPG SR-N ADKDN-TR , Right Cartridge Shown Pitch Line Size T Max L W 4mm Size Right Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TR , Hex Key Coolant Seal ADKDN-TR , ADKDN-TR , DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Right Cartridge Shown ADKDN-TR , Pitch Line Size T Max L W 5mm Size Right Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TR , Hex Key Coolant Seal ADKDN-TR , ADKDN-TR , DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Right Cartridge Shown ADKDN-TR , Pitch Line Size T Max L W 6mm Size Right Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TR , Hex Key Coolant Seal ADKDN-TR , ADKDN-TR , DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Right Cartridge Shown ADKDN-TR , Pitch Line T-Max Size 45º L W 3,4 and 5mm Size Right Cartridge KOOL Cut Modular 45 Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-UR DNTR EU-N Hex Key Coolant Seal ADKDN-UR DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Right Cartridge Shown ADKDN-UR DNTR EU-N 43 Call: Visit: sales@doriantool.com

45 Left Cartridge KOOL Cut Modular Turning Grooving for Left Tool holder W L Pitch Line Size T Max 2mm Size Left Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TL , Hex Key Coolant Seal ADKDN-TL , ADKDN-TL , DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Left Cartridge Shown W L Pitch Line Size T Max 3mm Size Left Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TL , DNTQ EU-N ADKDN-TL , DNTR EU-N CS-M0616 DNPG SR-N ADKDN-TL , Hex Key Coolant Seal CS-M0620 HAHK-50 CS08-04 Left Cartridge Shown W L Pitch Line Size T Max 4mm Size Left Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TL , Hex Key Coolant Seal ADKDN-TL , ADKDN-TL , DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Left Cartridge Shown ADKDN-TL , W L Pitch Line Size T Max 5mm Size Left Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TL , Hex Key Coolant Seal ADKDN-TL , ADKDN-TL , DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Left Cartridge Shown ADKDN-TL , W L Pitch Line Size T Max 6mm Size Left Cartridge KOOL Cut Modular Turning and Grooving Cartridge T. Max L W Size Style Lock Screw Lock Screw ADKDN-TL , Hex Key Coolant Seal ADKDN-TL , ADKDN-TL , DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Left Cartridge Shown ADKDN-TL , W Pitch Line T-Max Size 45º L Pitch Line 3,4 and 5mm Size Left Cartridge KOOL Cut Modular 45 Grooving T-Max W Cartridge T. Max L W Size Style Lock Screw Lock Screw Size 45º ADKDN-UL L DNTR EU-N Hex Key Coolant Seal ADKDN-UL DNTR EU-N CS-M0616 CS-M0620 HAHK-50 CS08-04 Left Cartridge Shown ADKDN-UL DNTR EU-N Right Cartridge Shown Call: Visit: sales@doriantool.com 44

46 Right Shank and Cartridge T-Max TL= C2+E - Total Length Size TL C2 A Shank Specification A See page 41, 42 B See page 41, 42 C2 See page 41, 42 Right Shown, Left Opposite CH (2) 1/8 NPT Coolant B Cartridge Specification E See page 43, 44 See page 43, 44 T See page 43, 44 E R.H. Shank Shank Shank Size CH Center Height ADDN-MTR-2020-C mm 20mm ADDN-MTR-2525-D mm 25mm ADDN-MTR-3232-E mm 32mm 2mm Size Cartridge s T. Max Size ADKDN-TR ADKDN-TR ADKDN-TR DNTQ EU-N DNPG SR-N x 22 3mm Size ADKDN-TR ADKDN-TR ADKDN-TR DNTQ EU-N DNTR EU-N DNPG SR-N X 22 4mm Size ADKDN-TR ADKDN-TR ADKDN-TR ADKDN-TR DNTQ EU-N DNTR EU-N DNPG SR-N X 25 Every tool holder will hold any cartridge on this page 5mm Size ADKDN-TR ADKDN-TR ADKDN-TR ADKDN-TR DNTQ EU-N DNTR EU-N DNPG SR-N X 25 R.H. Shank Shank Size CH Center Height ADDN-MGR-2020-C mm 20mm ADDN-MGR-2525-D mm 25mm ADDN-MGR-3232-E mm 32mm 6mm Size 3,4 and 5mm Size ADKDN-TR ADKDN-TR ADKDN-TR ADKDN-TR DNTQ EU-N DNPG SR-N ADKDN-UR DNTR EU-N X 25 ADKDN-UR DNTR EU-N X 22 ADKDN-UR DNTR EU-N or grade description see page 50 and Call: Visit: sales@doriantool.com

47 A Left Shank and Cartridge T-Max TL= C2+E - Total Length C2 TL Size Shank Specification A See page 41, 42 B See page 41, 42 C2 See page 41, 42 Left Shown, Right Opposite B (2) 1/8 NPT Coolant CH Cartridge Specification E See page 43, 44 See page 43, 44 T See page 43, 44 E L.H. Shank Shank Shank Size CH Center Height ADDN-MTL-2020-C mm 20mm ADDN-MTL-2525-D mm 25mm ADDN-MTL-3232-E mm 32mm 2mm Size Cartridge s T. Max Size ADKDN-TL ADKDN-TL DNTQ EU-N DNPG SR-N x 22 ADKDN-TL mm Size ADKDN-TL ADKDN-TL ADKDN-TL DNTQ EU-N DNTR EU-N DNPG SR-N X 22 Every tool holder will hold any cartridge on this page 4mm Size ADKDN-TL ADKDN-TL ADKDN-TL ADKDN-TL DNTQ EU-N DNTR EU-N DNPG SR-N X 25 5mm Size ADKDN-TL ADKDN-TL ADKDN-TL ADKDN-TL DNTQ EU-N DNTR EU-N DNPG SR-N X 25 L.H. Shank Shank Size CH Center Height ADDN-MGL-2020-C mm 20mm ADDN-MGL-2525-D mm 25mm ADDN-MGL-3232-E mm 32mm 6mm Size 2 and 6mm Size ADKDN-TL ADKDN-TL DNTQ EU-N ADKDN-TL DNPG SR-N X 25 ADKDN-TL ADKDN-UL ADKDN-UL DNTR EU-N ADKDN-UL DNTR EU-N X 22 ADKDN-UL DNTR EU-N ADKDN-UL or grade description see page 50 and 51 Call: Visit: sales@doriantool.com 46

48 Left Cartridge 3mm Size. Modular ace Grooving for Left Tool holder Size W T-Max L Left Cartridge Shown T-Max 12mm L.H. Cartridge irst Cut Diameter Cartridge T-Max L W Min. Max. Size Style Lock Screw Lock Screw ADCDN-L ADCDN-L ADCDN-L Hex Key Coolant Seal ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L > > DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T-Max 18mm ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L > > DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T-Max 24mm ADCDN-L ADCDN-L ADCDN-L > > DNTQ EU-N DNTR EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 or specification and grade see page 50 and Call: Visit: sales@doriantool.com

49 Left Cartridge 6mm Size. Modular ace Grooving for Left Tool holder Size W T-Max L Left Cartridge Shown T-Max 13mm L.H. Cartridge irst Cut Diameter T-Max L W Min. Max. Size Style Lock Screw ADCDN-L Cartridge Lock Screw Hex Key Coolant Seal ADCDN-L ADCDN-L ADCDN-L ADCDN-L60-500> > DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T-Max 26mm ADCDN-L ADCDN-L ADCDN-L ADCDN-L60-500> > DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 T-Max 39mm ADCDN-L ADCDN-L ADCDN-L ADCDN-L60-500> > DNTQ EU-N DNPG SR-N CS-M0616 CS-M0620 HAHK-50 CS08-04 or specification and grade see page 50 and 51 Call: Visit: sales@doriantool.com 48

50 A Left Kool Cut Modular acing & Grooving System T-Max TL= C2+E - Total Length C2 TL Size Shank Specification A See page 41, 42 B See page 41, 42 C2 See page 41, 42 B (2) 1/8 NPT Coolant CH Cartridge Specification E See page 47, 48 See page 47, 48 T See page 47, 48 E L.H. Shank Shank Shank Size CH Center Height ADDN-MTL-2020-C mm 20mm ADDN-MTL-2525-D mm 25mm ADDN-MTL-3232-E mm 32mm 3mm Size Cartridge s T. Max Size ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L > DNTQ EU-N DNTR EU-N DNPG SR-N mm 3mm Size ADCDN-L ADCDN-L ADCDN-L ADCDN-L ADCDN-L > DNTQ EU-N DNTR EU-N DNPG SR-N mm Every tool holder will hold any cartridge on this page 3mm Size ADCDN-L ADCDN-L ADCDN-L > DNTQ EU-N DNTR EU-N DNPG SR-N mm ADCDN-L mm Size ADCDN-L ADCDN-L ADCDN-L ADCDN-L60-500> DNTQ EU-N DNPG SR-N mm L.H. Shank Shank Size CH Center Height ADDN-MGL-2020-C mm 20mm ADDN-MGL-2525-D mm 25mm ADDN-MGL-3232-E mm 32mm 6mm Size ADCDN-L ADCDN-L ADCDN-L ADCDN-L60-500> DNTQ EU-N DNPG SR-N mm 6mm Size ADCDN-L ADCDN-L ADCDN-L ADCDN-L60-500> DNTQ EU-N DNPG SR-N mm or grade description see page 50 and Call: Visit: sales@doriantool.com

51 Turning & Grooving Grades Specification Double-End Cutting Edge DNTQ-N- DUP25UG Application Turning Grooving Parting-Off Neutral Straight Nose Multi-Cutting Direction Right and Left Cutting Data Dimension Maximum a p Depth of Cut for Turning Maximum f n eed Rate for Turning, Grooving and Parting-off Width Length Radius mm i/rev. mm/rev 2mm 22mm 0,002 1,00 0,006 0,15 3mm 22mm 0,003 1,50 0,008 0,20 4mm 25mm 0,004 2,00 0,009 0,23 5mm 25mm 0,004 2,50 0,010 0,25 6mm 25mm 0,004 3,00 0,012 0,30 Geometry, Material Application Steel Stainless Steel Cast Iron Non errous Super Alloys irst Choice Grade Second Best Double-End Cutting Edge DNTR-N- DUP25UG Profiling Turning Grooving Neutral Round Nose Multi-Cutting Direction Right and Left Cutting Data Dimension Maximum a p Depth of Cut for Turning Maximum f n eed Rate for Turning, Grooving and Parting-off Width Length Radius mm i/rev. mm/rev 3mm 22mm 1,5mm 1,50mm 0,012 0,30 4mm 25mm 2,0mm 2,00mm 0,014 0,35 5mm 25mm 3,0mm 2,50mm 0,016 0,40 Geometry, Material Application Steel Stainless Steel Cast Iron Non errous Super Alloys irst Choice Grade Second Best Double-End Cutting Edge DNPG-N/R/L- DPP40SG Straight Right and Left Nose Multi Parting off Direction Straight, Right and Left Cutting Data Grooving Parting-Off Dimension Maximum f n eed Rate for Parting-off Width Length Radius i/rev. mm/rev 2mm 22mm mm 22mm mm 25mm mm 25mm mm 25mm Geometry, Material Application Steel Stainless Steel Cast Iron Non errous Super Alloys irst Choice Grade Second Best Call: Visit: sales@doriantool.com 50

52 Turning & Grooving Grades DUP25UG DPP40SG Material V c (SM) Material V c (SM) Steel /min. m/min. Steel /min. m/min. Carbon Steel Carbon Steel P Low Alloy Steel P Low Alloy Steel High Temp Alloys High Temp Alloys M K N S erritic erritic Austenitic Austenitic M Duplex Duplex Martensitic Martensitic Gray Cast Iron Gray Cast Iron Modular Cast Iron K Modular Cast Iron Malleable Cast Iron Malleable Cast Iron Unleaded Copper Unleaded Copper Brass N Brass Unleaded Bronze Unleaded Bronze Iron Base Iron Base Nickel Base S Nickel Base Titanium Titanium DUP25UG HC-P25/M25 K30 N30 S30 Coated PVD-TiAlN 4µm DPP40SG HC-P45/M45 Multi Coated PVD-TiAlN 7µm Characteristics Hard, Wear, Abrasive and impact Resistant Characteristics Extremely Tough and Impact Resistant Substrate irst Choice Application Universal Multi Purpose Turning and Grooving Application; for Carbon Steel, Alloy Steel & Stainless Steel, Cast Iron, High Temp Alloys, non errous Materials irst Choice Application or Very Difficult Turning and Grooving Application; for orgings and Castings of Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron Cutting Speed SM (Vc) High Cutting Speed in stable Turning and Grooving conditions, light interrupted cut Cutting Speed SM (Vc) Low to Medium Cutting Speed in unstable conditions and heavy interrupted cut Cutting Condition Wet Cutting Condition Wet s Specification T Square Nose W Length Application Part Number Size Width Length Neutral DNTQ EU-N DUP25UG 2mm 22mm Grade DUP25UG DNTQ EU-N DUP25UG 3mm 25mm Turning DNTQ EU-N DUP25UG 4mm 25mm Grooving Parting-Off DNTQ EU-N DUP25UG 5mm 25mm DNTQ EU-N DUP25UG 6mm 25mm R Round Nose W Length Application Part Number Size Width Length Radius Grade DUP25UG DNTR EU-N DUP25UG 3mm 22mm Profiling Turning DNTR EU-N DUP25UG 4mm 25mm 2.0 Grooving DNTR EU-N DUP25UG 5mm 25mm 2.5 G Square Nose W Length Application Part Number Size Width Length Grade DPP40SG DNPG SR-N DPP40SG 2mm 22mm DNPG SR-N DPP40SG 3mm 22mm Grooving DNPG SR-N DPP40SG 4mm 25mm Parting-Off DNPG SR-N DPP40SG 5mm 25mm DNPG SR-N DPP40SG 6mm 25mm 51 Call: Visit: sales@doriantool.com

53 Kool Cut Twin Edge Parting-Off Blades Neutral Double Cutting Edge High Rigidity Better inish Straight Cut Positive Stop Double "V" Locking System W Size T-Max W Size D H1 H H1 L1 L 150º A 26mm Twin Blade Blades T. Max A D L L1 H H1 Size Key TWECOB-DNT TWECOB-DNT TWECOB-DNT DNTQ EU-N DUP25UG DNPG SR-N DPP40SG DNTQ EU-N DUP25UG mm DNTR EU-N DUP25UG mm KCIK-DN DNPG SR-N DPP40SG DNTQ EU-N DUP25UG DNTR EU-N DUP25UG DNPG SR-N DPP40SG mm 32mm Twin Blade Blades T. Max A D L L1 H H1 Size Key TWECOB-DNT DNTQ EU-N DUP25UG DNPG SR-N DPP40SG mm DNTQ EU-N DUP25UG TWECOB-DNT DNTR EU-N DUP25UG mm DNPG SR-N DPP40SG DNTQ EU-N DUP25UG KCIK-DN TWECOB-DNT DNTR EU-N DUP25UG mm DNPG SR-N DPP40SG DNTQ EU-N DUP25UG TWECOB-DNT TWECOB-DNT DNTR EU-N DUP25UG DNPG SR-N DPP40SG DNTQ EU-N DUP25UG DNPG SR-N DPP40SG mm 6mm Call: Visit: sales@doriantool.com 52

54 SLOT GRIP POSITIVE STOP BLADES OR CUT-O & GROOVING SGTN INSERTS Positive Stop Improved design featuring a Positive Stop. s are securely held in Slot Grip Positive Stop Blades by a tapered locking system featuring a Positive Stop that prevents insert drift and the blade pocket from spreading once the insert is firmly in place. W W T. Max D H H1 H1 A 150 L Designed for use with standard SGTN cut-off inserts and standard cutoff blade holders. The insert s cutting edge location repeats accurately and as a result prevents insert splitting under heavy feed and shock loads. The blade and insert geometry allows free chip flow, minimizing insert breakage due to chip build-up. Blades T. Max A D L H H1 Size Key SGIH , SGT(N/R/L)-2 2mm SGIH , SGT(N/R/L)-2 2mm SGIH SGT(N/R/L)-3 3mm SGIH SGT(N/R/L)-4 4mm SGIH SGT(N/R/L)-3 3mm SGIH SGT(N/RL)-4 4mm KCIK-DN SGIH SGT(N/R/L)-5 5mm SGIH SGT(N/R/L)-6 6mm SGIH SGT(N/R/L)-8 8mm SGIH SGT(N/R/L)-9 9mm or Slot Grip Cut Off inserts see complete Kool Cut Catalog 53 Call: Visit: sales@doriantool.com

55 Chip breaker Geometry Reduced machining force Controlled, coiled chip flow Higher material removal rate Application Quickly inserted into adjustable blades or cut-off and grooving air for interrupted cuts Cut-Off & Grooving s are Designed for use with standard cut-off inserts and standard cut-off blade holders. The insert s cutting edge location repeats accurately and as a result prevents insert splitting under heavy feed and shock loads. The blade and insert geometry permits free chip flow, minimizing insert breakage due to chip build-up. Material Carbon & Alloy Steel Aluminum & Non-errous Metals & Materials Carbon & Alloy Steel 300 & 400 Series Stainless Steel Cast Iron, Copper/Brass Aluminum & Non-errous Materials High Temp Alloys Hard Steel to 58 HRC Grade P35 K25 N25 K25 P25 M25 Coating CVD TiN Coated Uncoated PVD TiAlN Coated Grade Dimensions DC656 DK25 DASK25B ANSI Size mm Lead Angle Width 0,05 inch mm SGTN-2 2 0º SGTN-2.4 2, , SGTN-3 3 0º SGTN Neutral SGTN-4 4 0º SGTN-4.8 4, , SGTN-5 5 0º SGTN-6 6 0º SGTN-8 8 0º SGTN-9 9 0º SGTR º SGTR , , SGTR º SGTR Right SGTR º SGTR , , SGTR º SGTR º SGTR º SGTR º SGTL º SGTL , , SGTL º SGTL Left SGTL º SGTL , , SGTL º SGTL º SGTL º SGTL º Call: Visit: sales@doriantool.com 54

56 NOTES: 55 Call: Visit:

57 KOOL CUT TM BORING BARS Quick Change Boring & Grooving System Expands the lexibility of Multi-Operations with the Combination of Steel and Carbide Boring Bar Sizes And Interchangeable Head Styles Makes Boring and Grooving Simple - Efficient - Economic Boring and Grooving Left Boring and Grooving Quick Change Head acing and Grooving Right ace Grooving Quick Change Head 45º Grooving 45 Right Boring, ace Grooving Quick Change Head Call: Visit: sales@doriantool.com 56

58 KOOL CUT Quick Change Boring & Grooving System Built for Productivity! Interchangeable Steel and Carbide Boring Bar Sizes & Quick Change Head Styles Rigidity lexibility Precision Interchangeability Advanced Technology Repeatability Multi-Operation High Performance Rear Coolant Inlet The KOOL Cut Quick Change Boring Bar Body; Expands the flexibility for multi boring operation with precise and repetitive accuracy, and rigidity. Steel Body & Carbide Bar Body Bidirectional Right and Left Quick Change Locking System Housing Quick Change Boring Bar Head The KOOL Cut Quick Change Boring Bar Head with Jet-Coolant; Made of heat treated alloy steel, TiN coated. Locks into the body of the Quick Change boring bar with a Three Point Locking System. The locking system will expand surface contact for maximum locking rigidity and precise interchangeability. Three point locking system. The KOOL Cut Quick Change Thru Coolant System; Coolant is connected on the Coolant Inlet located on the rear end of the Boring Bar Body, The Coolant will travel thru the Boring Bar Body, and exit above the cutting edge of the insert. The coolant is precisely aimed onto the cutting edge of the insert. The is kept at constant Temperature, and chips are removed from the cutting edge and flushed out from the bore. With the constant insert Temperature, clean cutting edge, and chip free bore, the work quality is increased, and the insert life is increased up to 200% Jet-Coolant Coolant Outlet Coolant Channel Quick Change Coolant Inlet 57 Call: Visit: sales@doriantool.com

59 SIMPLE - PRECISE - RIGID To simplify deep hole boring with expandable capabilities of multi boring applications Three Point Locking System Locks the Quick Change Head to the Boring Bar Housing by turning the two piece double head tapered locking screw. The screw will expand, forcing the head against the tapered holes. This tension pushes the body of the Quick Change Head into the Boring Bar Housing, causing the tapered shoulder of the Quick Change Head to pull against the inner taper of the Boring Bar Housing. Powering the locking screw will cause both heads of the screw to lock 180 simultaneously. This locking angle forces the Quick Change Head to align symmetrically at 90º with the Boring Bar Housing. The expanding, pushing and pulling mechanical forces result in Three Point Locking System. Quick Change Head Locking Rotation Locking Area Housing Boring Bar Sizes Sizes: 20mm, 25mm, 32mm Boring Heads Positive and Threading DNTQ s Locking System Coolant Inlet Carbide & Steel Body Offered in two versions: Heat Treated Alloy Steel (for the standard version). Precision and ground solid Alloyed Carbide (for high performance version). The rigidity and stability of the carbide body will minimize the boring vibration and improve performance over the steel body. Brazed Connection The Quick Change Housing and the Carbide Boring Bar Body are silver brazed. The combination of right alloy and thickness of the silver braze makes the brazing strong and unbreakable, but flexible under interrupt cuts. Center Line or center gage reference. Jet-Stream Thru Coolant Quick Change Heads Made of heat treated alloy steel, TiN coated. The cylindrical body and the tapered shoulder of the Quick Change Head locks precisely into the boring bar body housing. The Three Point Locking System will expand surface contact for maximum locking rigidity and precise interchangeability. The Jet Stream thru coolant system will enhance performance, keeping the insert at constant temperature clean and undamaged cutting edge, and will remove chips from the bore while machining. Housing Made of heat treated alloy steel and is precisely machined and brazed on to the Carbide Boring Bar Body. Call: Visit: sales@doriantool.com 58

60 Boring and Grooving Operation Set-Up Step 1. Bar Set up or best performance and to eliminate chatter in boring and grooving operation; Select a boring bar with the largest diameter permissible. Extend the boring bar the shortest length possible Steel Bar 3 x Dia. Carbide bar 5 x Dia. Use the narrowest insert possible Step 2. Roughing Cut the first groove to the depth of the first roughing cutting diameter. Then feed the insert toward the other side of the workpiece. Cut till the end, then retract the insert at 45 away from the wall. Repeat the operation, till the roughing operation is complete Step 3. inishing ace-off at finish dimension, one side of the groove to the finished diameter. Retract the insert at 45 away from the wall and move to the other side of the groove. ace-off to the finish diameter and continue to cut till the other wall is reached, than retract the insert at Call: Visit: sales@doriantool.com

61 KOOL CUT Quick Change Boring & Grooving System Expands the lexibility of Multi-Operations Boring and Grooving 2mm Size Boring and Grooving 3mm Size Boring and Grooving 4mm Size One Quick Change Body ive Interchangeable Heads Boring, Profiling and Grooving 45º acing and ace Grooving Call: Visit:

62 KOOL Cut Quick Change Turning, Threading, Grooving & acing Steel & Carbide Shank C1 1/8 NPT D C3 C4 L (Max. Depth of Bore / Boring Ratio) C2 (Holding Area) C Boring Bar Center Line H Min Bore (B) in the Quick Change Head charts below includes chip clearance. Always allow enough room for chip evacuation. 1 Boring Head Center Line Bar Neutral Boring Ratio Construction Bar Dia. Actual Min. Bore B 1 H L C C1 C2 C3 C4 Quick Change Head A20M-R-4-MBQC A25M-R-4-MBQC x Dia. Steel Body 25 B= + H + (1/2 Bar Dia.) 1=+H DQMH-12-_ 4 A32M-S-4-MBQC Coolant Bore Dia. Coolant Attachment Thread 1/8"-27NTP Optimum boring lenght of the bar is 4 x Dia., cutting lenght may be extended by using the positive and sharp cutting edge insert. Bar Neutral AE20M-Q-6-MBQC Boring Ratio Construction Bar Dia. 20 Actual Min. Bore B 1 H L C C1 C2 C3 C Quick Change Head AE20M-S-6-MBQC AE25M-R-6-MBQC x Dia. Carbide Body 25 B= + H + (1/2 Bar Dia.) 1=+H DQMH-12-_ 5 AE25M-T-6-MBQC AE32M-U-6-MBQC Optimum boring lenght of the bar is 6 x Dia., cutting lenght may be extended by using the positive and sharp cutting edge insert. Coolant Bore Dia. 4 Coolant Attachment Thread 1/8"-27NTP 61 Call: Visit: sales@doriantool.com

63 KOOL Cut Quick Change Boring and Grooving Head - 2mm Size Size T-Max Right Shown Left Opposite E Head Quick B Min. Change R.H. L.H. Dia. E T-Max Head Bar Diameter Size Style Lock Screw Key DQCMH-ITR/L , DQCMH-ITR/L , DQCMH-ITR/L , Coolant Seal DNT CS-M0516 HAHK-50 CS08-04 KOOL Cut Quick Change Boring and Grooving Head - 3mm Size Size T-Max Right Shown Left Opposite E Head Quick B Min. Change Bar Diameter Size Style Lock Screw R.H. L.H. Dia. E T-Max Head Key DQCMH-ITR/L , DQCMH-ITR/L , DQCMH-ITR/L , Coolant Seal DNT CS-M0516 HAHK-50 CS08-04 KOOL Cut Quick Change Boring and Grooving Head - 4mm Size Size T-Max Right Shown Left Opposite E Head Quick B Min. Change Bar Diameter Size Style Lock Screw R.H. L.H. Dia. E T-Max Head Key DQCMH-ITR/L , DQCMH-ITR/L , DQCMH-ITR/L , Coolant Seal DNT CS-M0516 HAHK-50 CS08-04 Call: Visit: sales@doriantool.com 62

64 KOOL Cut Quick Change Boring and Grooving 45º Head - 2mm, 3mm and 4mm Size T-Max 45º Size B Right Shown Left Opposite E Head B Quick Bar Min. Change Diameter Size Style Lock Screw R.H. L.H. Dia. E T-Max Head Key DQCMH-IUR/L , DNT DQCMH-IUR/L , DNT DQCMH-IUR/L , DNT Coolant Seal CS-M0516 HAHK-50 CS08-04 KOOL Cut Quick Change Internal ace Grooving Head - 3mm Size T-Max Size B Right Shown Left Opposite E Head B Dia. Quick Change Bar R.H. L.H. Min. Max. E T-Max Head Diameter Size Style Lock Screw Key DQCNH-IR/L , DQCNH-IR/L , DQCNH-IR/L , DQCNH-IR/L , Coolant Seal DNT CS-M0516 HAHK-50 CS Call: Visit: sales@doriantool.com

65 SWISS SCREW MACHINE TOOLS with Advanced Thru Coolant Jet-Stream TM System Coolant ports on the side and the back Positive Qualified stop for tool holder after insert change Call: Visit:

66 High Pressure Coolant Quick Connection for Standard or High Pressure Applications with Side or End Coolant Connection Item Part Number 1 DT-HP-PLIERS High Pressure Disconnecting Player To Disconnect the Hydraulic Coolant Hose ollow Two Safe & Easy Steps: 1. Place the thinner section of the wrench-nose between the coolant hose and the connector. 2. Close the wrench and it will disconnect Notch 1 of the coolant hose. Use the thicker section of the wrench-nose and close again to disconnect Notch 2. Swiss Tool holders-high Pressure Coolant Connection 7 Pcs. Kit Working Pressure New Hydraulic Coolant Hose or Safe & Easy Disconnection Part Number UPC No Bar PSI Item DT-HPTU-ASSY Swiss High Pressure Quick Release Coolant 7 pcs. Kit DT-HPTU-8X mm High Pressure 8mm Coolant Tubing Only 2 DT-HP90C-8/ High Pressure Quick Release Straight Intec 3 DT-HP90C-8/ High Pressure Quick Release Straight Intec 4 DT-HP0SC-1/8X /8" NPT Straight High Pressure Quick Release Connector 5 DT-HP90CE-1/8X /8" NPT 90 Elbow High Pressure Quick Release Connector 6 DT-HP0SC-6X mm Straight High Pressure Quick Release Connector 7 DT-HP90C-6X mm 90 Elbow High Pressure Quick Release Connector 65 Call: Visit: sales@doriantool.com

67 ASCAC Jet-Stream Thru Coolant R/L Tool holder Style A - 0 Side Cutting Edge Angle for 7 positive 80 diamond CC_W inserts Shank E METRIC CC_W Coolant Outlet Right Left (Tool Height Length Gage Stop) 0º 5º ASCACR/L 1010-H CCGW ASCACR/L 1212-H CCGW ASCACR/L 1616-H CCGW ASCACR/L 1212-H CCGW-09T308 ASCACR/L 1616-H CCGW-09T308 ASCACR/L 2020-K CCGW-09T308 ASCNC Jet-Stream Thru Coolant R/L Tool holder Style N - Negative 5 End or Side Cutting Edge Angle for 7 positive 80 diamond CC_W inserts Shank E Coolant Outlet METRIC CC_W Right Left (Tool Height Length Gage Stop) 0º ASCNCR/L 1010-H CCGW ASCNCR/L 1212-H CCGW ASCNCR/L 1616-H CCGW ASCNCR/L 1212-H CCGW-09T308 ASCNCR/L 1616-H CCGW-09T308 ASCNCR/L 2020-K CCGW-09T308 ASDAC Jet-Stream Thru Coolant R/L Tool holder Style A - 0 Side Cutting Edge Angle for 7 positive 55 diamond DC_W inserts Shank Coolant Outlet E METRIC DC_W Right Left (Tool Height Length Gage Stop) ASDACR/L 1010-H DCGW ASDACR/L 1212-H DCGW ASDACR/L 1616-H DCGW ASDACR/L 1212-H DCGW-11T308 ASDACR/L 1616-H DCGW-11T308 ASDACR/L 2020-K DCGW-11T308 ASDNC Jet-Stream Thru Coolant R/L Tool holder Style N - 3 Side Cutting Edge Angle for 7 positive 55 diamond DC_W inserts Coolant Outlet 3º METRIC Right Shank E Left Height Length (Tool Stop) DC_W Gage ASDNCR/L 1010-H DCGW ASDNCR/L 1212-H DCGW ASDNCR/L 1616-H DCGW ASDNCR/L 1212-H DCGW-11T308 ASDNCR/L 1616-H DCGW-11T308 ASDNCR/L 2020-K DCGW-11T308 ASDPC Jet-Stream Thru Coolant Neutral Tool holder Style P Side Cutting Edge Angle for 7 positive 55 diamond DC_W inserts METRIC Shank E DC_W Coolant Outlet Neutral Height Length (Tool Stop) Gage ASDPCN 1010-H DCGW ASDPCN 1212-H DCGW ASDPCN 1212-H DCGW-11T308 ASDPCN 1616-H DCGW-11T308 ASTAC Jet-Stream Thru Coolant R/L Tool holder Style A - 0 Side Cutting Edge Angle for 7 positive triangle TC_W inserts Shank E METRIC Coolant Outlet Right Left (Tool Height Length Gage Stop) 0º ASTACR/L 1010-H TCGW ASTACR/L 1212-H TCGW ASTACR/L 1616-H TCGW ASTACR/L 2020-K TCGW ASTNC Jet-Stream Thru Coolant R/L Tool holder Style N - 3 Side Cutting Edge Angle for 7 positive triangle TC_W inserts Shank E Coolant Outlet METRIC TC_W Gage 3º 0º Right Left Height Length (Tool Stop) ASTNCR/L 1010-H TCGW ASTNCR/L 1212-H TCGW ASTNCR/L 1616-H TCGW ASTNCR/L 1616-H TCGW-16T308 ASVAB Jet-Stream Thru Coolant R/L Tool holder Style A - 0 Side Cutting Edge Angle for 5 positive 35 diamond VB_W inserts Shank E METRIC VB_W Coolant Outlet Right Left (Tool Height Length Gage Stop) ASVABR/L 1010-H VBGW ASVABR/L 1212-H VBGW ASVABR/L 1212-K VBGW ASVABR/L 1616-K VBGW ASVABR/L 2020-K VBGW ASVNB Jet-Stream Thru Coolant R/L Tool holder Style N - 3 Side Cutting Edge Angle for 5 positive 35 diamond VB_W inserts Coolant Outlet Shank E METRIC VB_W Right Left (Tool Height Length Gage Stop) ASVNBR/L 1010-H VBGW º ASVNBR/L 1212-H VBGW ASVNBR/L 1212-K VBGW ASVNBR/L 1616-K VBGW ASVNBR/L 2020-K VBGW ASVVB Jet-Stream Thru Coolant Neutral Tool holder Style V Side Cutting Edge Angle for 5 positive 35 diamond VB_W inserts Coolant Outlet Shank E METRIC VB_W 17.5º TYP (Tool Neutral Height Length Gage Stop) ASVVBN 1010-H VBGW ASVVBN 1212-H VBGW ASVVBN 1212-K VBGW ASVVBN 1616-K VBGW ASVAC Jet-Stream Thru Coolant R/L Tool holder Style A - 0 Side Cutting Edge Angle for 7 positive 35 diamond VC_W inserts Coolant Outlet Shank E METRIC VC_W Right Left (Tool Height Length Gage Stop) 0º ASVACR/L 1010-H VCGW ASVACR/L 1212-H VCGW ASVACR/L 1212-K VCGW ASVACR/L 1616-K VCGW ASVNC Jet-Stream Thru Coolant R/L Tool holder Style N - 3 Side Cutting Edge Angle for 7 positive 35 diamond VC_W inserts Coolant Outlet 3º Coolant Outlet METRIC Right Shank E Left Height Length (Tool Stop) VC_W Gage ASVNCR/L 1010-H VCGW ASVNCR/L 1212-H VCGW ASVNCR/L 1616-H VCGW ASVNCR/L 1212-K VCGW ASVNCR/L 1616-K VCGW ASVNCR/L 2020-K VCGW ASVVC Jet-Stream Thru Coolant Neutral Tool holder Style V Side Cutting Edge Angle for 7 positive 35 diamond VC_W inserts 17.5º TYP METRIC Neutral Height Shank Length E (Tool Stop) VC_W Gage ASVVCN 1010-H VCGW ASVVCN 1212-H VCGW ASVVCN 1212-K VCGW ASVVCN 2020-K VCGW Call: Visit: sales@doriantool.com 66

68 ASVNP Jet-Stream Thru Coolant R/L Tool holder Style N - 3 Side Cutting Edge Angle for 11 positive 35 diamond VP_W inserts Shank E Coolant Outlet METRIC VP_W Right Left (Tool Height Length Gage Stop) 3º ASVNPR/L 1010-H VPGW ASVNPR/L 1212-H VPGW ASVNPR/L 1212-K VPGW ASVNPR/L 1616-K VPGW ASVNPR/L 2020-K VPGW ANS Jet-Stream Thru Coolant Threading Tool holder - Right and Left for DorNotch V Thread s Coolant Outlet METRIC Right Left Shank Height Length E (Tool Stop) ANSR/L 1212-H ANSR/L 1616-H ANSR/L 1212-H ANSR/L 1616-H Gage NG-2R NG-2L NG-3R NG-3L ASVVP Jet-Stream Thru Coolant Neutral Tool holder Style V Side Cutting Edge Angle for 11 positive 35 diamond VP_W inserts Coolant Outlet METRIC Shank E VP_W 17.5º TYP Neutral Height Length (Tool Stop) Gage ASVVPN 1010-H VPGW ASVVPN 1212-H VPGW ASVVPN 1212-K VPGW ASVVPN 1616-K VPGW ASTVO Jet-Stream Thru Coolant Threading Tool holder- Right and Left for On Edge TNMC s Coolant Outlet METRIC Right Left Shank Height Length E (Tool Stop) ASTVOR/L 1010-H ASTVOR/L 1212-H ASTVOR/L 1616-H Gage TNMC-322 ASE Jet-Stream Thru Coolant Threading Tool holder - Right and Left for LayDown Coolant Outlet METRIC Right Left Shank Height Length E (Tool Stop) Gage ASER/L 1010-H A60 ASER/L 1212-H ASER/L 1616-H G60 ASGTH Jet-Stream Thru Coolant Cut-Off Tool holder - Right and Left for SGTN Cut-Off s for Swiss Screw Machines METRIC Shank E Max. Coolant Outlet Size Right Left Height Length (Tool Stop) Dia. Gage ADDN Jet-Stream Thru Coolant External Turning, Grooving & Cut-off Tool holders METRIC Shank Grooving Size Max Right Left Height Length Coolant Outlet Dia. Dia. E (Tool Stop) Grooving Max. ADDN-TR/L-1010-H DN_-22_N-20 ADDN-TR/L-1212-H DN_-22_N-20 ADDN-TR/L-1212-H DN_-22_N-30- ADDN-TR/L-1616-H DN_-22_N-20 ADDN-TR/L-1616-H DN_-22_N-30- ADDN-TR/L-2020-K DN_-22_N-20 ADDN-TR/L-2020-K DN_-22_N-30- ADDN Jet-Stream Thru Coolant External Turning, Grooving & Cut-off Tool holders Grooving Max METRIC Shank Size Right Left Height Length Dia. E Coolant Outlet ADDN Jet-Stream Thru Coolant External Turning, Grooving & Cut-off Tool holders Shank Grooving METRIC Max Size Height Coolant Outlet ASGTHR/L 1010-H ,0 2, ASGTHR/L 1212-H ,0 2, ASGTHR/L 1616-H ,0 2, ASGTHR/L 2020-K ,0 2, ASGTHR/L 2525-K ,0 2, ASGTHR/L 1010-H , ASGTHR/L 1212-H , ASGTHR/L 1616-H , ASGTHR/L 2020-K , ASGTHR/L 2525-K , Right Left Length E (Tool Stop) Grooving Max. ADDN-TR/L-1010-H DN_-22_N-20 ADDN-TR/L-1212-H DN_-22_N-20 ADDN-TR/L-1212-H DN_-22_N-30- ADDN-TR/L-1616-H DN_-22_N-20 ADDN-TR/L-1616-H DN_-22_N-30- ADDN-TR/L-2020-K DN_-22_N-20 ADDN-TR/L-2020-K DN_-22_N-30- E Grooving (Tool Stop) Max. ADDN-TR/L-1010-H DN_-22_N-20 ADDN-TR/L-1212-H DN_-22_N-20 ADDN-TR/L-1616-H DN_-22_N-20 ADDN-TR/L-1616-H DN_-22_N-30- ADDN-TR/L-2020-K DN_-22_N-20 ADDN-TR/L-2020-K DN_-22_N-30- Max. Dia. Max. Dia. Max. Dia. SGTN-2.0 SGTN Call: Visit: sales@doriantool.com

69 KNURLING TOOLS from THE KNURLING TOOL SPECIALISTS Specialists for CNC & M a n u a l L a t h e s Call: Visit: sales@doriantool.com 68

70 Knurling Tools & Wheels CNC Modular Shank for Standard Series Modular Knurling Heads CNC Modular Shank for SMALL Series Modular Knurling Heads SWKT Single Wheel ixed Knurling Tool HDSWKT Heavy Duty Single Wheel ixed Knurling Tool KTM109 Heavy Duty Style Straddle Square Shank Knurling Tool 1.5" & 2.5" Diameter Range Page 78 Page 78 Page 83 Page 85 CNC Light Duty 60º Diamond Cutting Knurling Head SCNC SMALL Light Duty 60º Diamond Cutting Knurling Head SSWKT Single Shoulder Wheel ixed Knurling Tool KTW109 Shoulder Style Straddle Square Shank Knurling Tool 1.5" & 2.5" Diameter Range Page 80 Page 82 Page 84 Page 85 CNC-2-R 2 - Heavy Duty 60º Diamond Cutting Knurling Head SCNC SMALL Shoulder orming Knurling Head KT ixed Knurling Tool HDKT Heavy Duty ixed Knurling Tool KTO109 Heavy Duty Style Straddle Square Shank Knurling Tool 4.0"Diameter Page 80 Page 82 Page 83 Page 85 CNC-3-M 3 - Extra Heavy Duty 60º Diamond Cutting Knurling Head SCNC-7-D 7- SMALL Straddle orming Knurling Head SKT Shoulder ixed Knurling Tool KTW Shoulder Style Straddle Square Shank Knurling Tool 4.0" Diameter Range Page 80 Page 82 Page 83 Page 85 CNC-4-M 4- Double Wheel orming Knurling Head SCNC SMALL Straddle orming Knurling Head SCKN Self Centering Knurling Tool HDSCKN Heavy Duty Self Centering Knurling Tool CNC109-M Side Mount lange Square Shank Knurling Tool 1.5 & 2.5 Diameter Range Page 80 Page 82 Page 83 Page 85 CNC-5-O 5- Single Wheel orming Knurling Head 107ST Straight Cutting Knurling Tool SSCK Shoulder Self Centering Knurling Tool CNC109-4 Side Mount Shoulder Square Shank Knurling Tool 1.5 & 2.5 Diameter Range Page 80 Page 84 Page 83 Page 85 CNC Shoulder orming Knurling Head 107ST Straight Cutting Shoulder Knurling Tool TIKT True Internal Knurling Tool 3WKT Three Wheel Knurling Tool Page 80 Page 84 Page 84 Page 87 CNC-7-R 7- Straddle orming Knurling Head 3SHKT Three Swivel Head orming Knurling Tool SIKT Shoulder Internal Knurling Tool Knurling Wheels Page 80 Page 83 Page 84 Page 89 CNC Straddle orming Knurling Head ACEKT Single Wheel ace orming Knurling Tool MMKT Milling Machine Knurling Tool Page 80 Page 84 Page Call: Visit: sales@doriantool.com

71 Knurling Tools Applications orm for Manual & CNC Machines If your knurling application is not in the chart, please supply prints and information. Knurling Application Knurling Tool Recommendation Knurling Application Knurling Tool Recommendation Diamond Shoulderless BEST BETTER GOOD Straight Shoulderless BEST BETTER GOOD SCNC-_-1-2 SCNC-_-7-D SCKN-_-DW-_ SCNC-_7-D 107ST-_ CMC-_5-O CNC-_-1-2 CNC-_-7-R 3SHKT-_- CNC-_7-R 107ST-_ SWKT-_-_ CNC-_-2-R KTM109-_-M CNC-_-4-M KTM109-_-M CNC-_4-M CNC-_-3-M KTO109-_-O KTO109-_-O SCKN-_-DW-_ 3WKT-_-_ 3SHKT-_- 3WKT-_-_ Diamond to a Shoulder BEST BETTER GOOD Straight to a Shoulder BEST BETTER GOOD SCNC-_-6-2 KT109-_-4 SCCK-_-DW-_ KTW109-_-4 SCNC-_-6-2 KT-_-_ CNC-_-6-4 KTM-109-_-M 3WKT-_-_ CNC-_-6-4 3WKT-_-_ Diamond Band BEST BETTER GOOD Small Diameter Diamond BEST BETTER GOOD SCNC-_-7-D- SCKN-_-DW-_ SKT-_-_ Shoulderless 3WKT-_-_ SCNC-_-7-D SKT-_-_ Straight Band CNC-_-7-R 3SHKT-_- SWKT-_-_ CNC-_-7-R SWKT-_-_ KTM109-_-M KTO109-_-O CNC-_-4-M CNC-_-5-O Small Diameter Straight Shoulderless Small Diameter Diamond to a Shoulder BEST BETTER GOOD Taper Diamond BEST BETTER GOOD 3WKT-_-_ Special Small Diameter Straight to a Shoulder Taper Straight Diamond Crest BEST BETTER GOOD Internal Diamond BEST BETTER GOOD Straight Crest SCNC-_-7-D SCKN-_DW-_ SKT-_-_ CNC-_-7-R 3SHKT-_- SWKT-_-_ KTM109-_-M CNC-_-4-M CNC-_-5-O Internal Straight TIKT-_- SIKT-_- Radio ace BEST BETTER GOOD Milling Diamond BEST BETTER GOOD Special MMKT-_-_ Milling Straight Call: Visit: sales@doriantool.com 70

72 Knurling Tools Applications orm for Manual & CNC Machines igure 1 - ull Knurling Knurl Wheel Identification Edge Prep CD KP DAK DBK RE KL Straight Diagonal Diagonal Diamond Diamond ull Beveled Knurl Right Left Male emale aced Edge WL igure 2 - Band Knurling CD KP Knurl Pitch TPI Is the number of teeth per inch Circular Pitch Is the distance between tooth to tooth RE BKL1 BKL2 E DAK DBK Diametral Pitch Is the number of teeth per inch of diameter P (Metric Pitch and Inch Pitch) α WL 1.0 TPI (Teeth per inch) igure 3 - Shoulder Knurling CD KP DAK DBK SD Knurling Specification x Check Knurling Specification SKP Straight Knurl DKPM Diamond Knurl Male RE KL E DKPR Diagonal Knurl Right DKP Diamond Knurl emale WL DKPL Diagonal Knurl Left ill Knurling Dimension KP Knurl Pitch Inch TPI AP % of Knurl Depth igure 4 - Crest Knurling DP CD KP Metric P-mm DBK Diameter (Blank) Before Knurling E ront End Distance D1 DAK DBK DAK Diameter After Knurling RE Rear End Distance KL Knurling Length CD Chuck Distance RE KL E BKL1 Band Knurling Length 1 SD Shoulder Diameter BKL2 Band Knurling Length 2 D1 Shoulder Diameter WL WL Workpiece Length 71 Call: Visit: sales@doriantool.com

73 Knurling Tools Applications orm for Manual & CNC Machines igure 5 - ID Internal Knurling SKL Knurling Specification ill Knurling Dimension TID True Internal Diameter SKL Shoulder Knurling Length SID Shoulder Internal Diameter KP Knurl Pattern TID SID TKL True Knurling Length PI Knurl Pitch Inch TPI DP TKL KP Metric P-mm igure 6 - ace Knurling Knurling Specification KP ill Knurling Dimension ID Inside Diameter OD Outside Diameter KP Knurl Pattern PI Knurl Pitch Inch TPI ID OD DP Metric P-mm TKL igure 7 - Taper Knurling Knurling Specification KP ill Knurling Dimension D Small Diameter D1 Large Diameter KP Knurl Pattern PI Knurl Pitch Inch TPI D D1 DP Metric P-mm igure 8 - Milling Knurling Knurling Specification KP KW ill Knurling Dimension KW Knurling Width KP Knurl Pattern KL Knurling Length PI Knurl Pitch Inch TPI DP Metric P-mm KL Knurling Production Information Material Annealed Heat Treated Knurling Tool Recommendation Customer Information igure Dorian Tool Recommendation Quantity Hardness Date Item UPC Price Delivery Company Knurling Tool Machine Manual CNC Swiss Other Tool holder Style Left Right Tool holder Size Contact Telephone Knurling Head Knurling Wheel Knurling Pin Call: Visit: sales@doriantool.com 72

74 Cutting Speed Knurling is ordinarily performed at the same speeds used as turning operations. To calculate the cutting parameter of a knurling operation, use the same SM used for high speed and cobalt tool bits to calculate (RPM) revolution of the workpiece and Knurling (f n ) feed rate. or in-feed knurling, the knurl should be fed toward the work gradually until contact is made with the blank. As few work revolutions as possible should be allowed for feeding the knurl into the work. The knurl should be fed to full depth as rapidly as permissible without causing undue pressure on the work, the tools, and the equipment. Too many revolutions may result in a roughened or slivered tooth surface and destruction of the knurl and the knurling tool (5 to 20 REV) or end-feed knurling, the rate of feed is governed by the type of material being knurled, diameter and rigidity of the work, and the width and pitch of the knurl. aster feeds are used for the softer materials and slower feeds for harder materials. Knurling ormula: 12 x SM RPM= π x DIA SM= (DIA X π ) X RPM 12 Although the knurling should be normally completed within 10 to 25 work revolutions, the ability of many machine cross slides to operate at the desired high speeds prohibits the use of the preferred revolutions, especially when high work spindle speeds are used. The cam rise must be continuous with no dwell or backing away until the high point is reached. It is desirable to have a slight dwell on the cam at the completion of the feeding which allows several revolutions of the work with the knurl at full tooth depth. The amount of dwell depends upon the nature of the work and the material. The knurl should be then withdrawn from the work quickly. The feeds used for end-feed knurling with the turret vary considerably and are dependent upon the pitch of the knurl, material being knurled, and the nature and diameter of the work. -Warning- Speeds and feeds information in the catalog are for reference only. If the operator does not feel safe using our speeds and feed recommendation, the operator should use what he or she is comfortable with. Dorian Tool is not responsible for any injuries that may occur. Table 8 Knurling SM (V c ) parameter Material and Knurl Pitch Knurl orming Knurl Cutting P (Metric Pitch and Inch Pitch) α 1.0 TPI (Teeth per inch) Material Material Specs Low carbon steel Alloy Steel Tool steels D2 Stainless Steel Aluminum Brass Plastic 6061 C360 Delrin TPI Metric Pitch >14 >1, ,6-1, ,0-0,7 40> 0,6> >14 >1, ,6-1, ,0-0,7 40> 0,6> >14 >1, ,6-1, ,0-0,7 40> 0,6> >14 >1, ,6-1, ,0-0,7 40> 0,6> orming Speed (SM and V c ) eed rate (f n ) Cutting Speed End eed Smaller Wheel dia. Larger End eed In eed Smaller Wheel dia. Larger SM [15-63 V c m/min] SM [10-45 m/min] SM [10-45 m/min] SM [ m/min] 0.006" [0,15mm] 0.008" [0,20mm] 0.010" [,25mm] 0.012" [,30mm] 0.004" [,10mm] 0.005" [,13mm] 0.007" [,18mm] 0.009" [,23mm] 0.004" [,10mm] 0.005" [,13mm] 0.007" [,18mm] 0.009" [,23mm] 0.008" [,20mm] 0.010" [,25mm] 0.013" [,33mm] 0.017" [,43mm] " [,025-,075mm] " [0,050-,100mm " [,050-,100mm] " [,050-,100mm] " [,025-,050mm] " [,025-,075mm] " [,025-,075mm] " [,025-,075mm] " [,025-,050mm] " [,025-,075mm] " [,025-,075mm] " [,025-,075mm] " [,050-,100mm] " [,075-,125mm] " [,075-,125mm] " [,075-,125mm] SM [ m/min] SM [21-75 m/min] SM [21-75 m/min] SM [ m/min] 0.009" [,23mm] 0.011" [,28mm] 0.013" [,33mm] 0.015" [,38mm] 0.007" [,18mm] 0.008" [,20mm] 0.010" [,25mm] 0.012" [,30mm] 0.007" [,18mm] 0.008" [,20mm] 0.010" [,25mm] 0.012" [,30mm] 0.011" [,28mm] 0.013" [,33mm] 0.016" [,40mm] 0.020" [,50mm] Note: When knurling, start with low Cutting speed, to evaluate the wheel performance, (to avoid the premature life of the wheel) increase until optimum cutting speed and feed is achieved 73 Call: Visit: sales@doriantool.com

75 NOTES: Call: Visit:

76 Left Reversible Cutting direction Right Versatility Multi diameter diamond knurling cutting style Reversible Head for Right or Left knurling. Heavy duty knurl cutting and knurl forming Double Wheel forming knurling head Straddle forming knurling head Shoulder forming knurling head Wide diameter range for small diameter to large diameter parts Modular Multi shank size interchangeable with 8 knurling heads. Adjustable Dovetail knurling head locking system. Quick and precise center line setting. Knurling wheel angle stationary for diamond cutting Two Ways to Knurl orming (five heads available) Knurl forming action (material displacement by means of rolling) is generally for special application. It creates a better quality of knurl pattern, but speeds and feeds are sacrificed for this quality. The force applied through forming is increased in larger diameters making knurling difficult and slow. Cutting (three heads available) Knurl cutting action cuts a perfect knurl pattern 10 to 20 times faster than any conventional knurling tool. It is engineered to knurl any material, including thin wall tubing, with minimum stress to the spindle and work piece. Knurl cutting action speeds up knurling enough to become applicable for CNC use. CNC M used for examples. 75 Call: Visit: sales@doriantool.com

77 Knurling Tools Cutting Operation Adjustment Screw Starting Cutting Knurl 1) Touch the workpiece diameter with the knurl wheels. Locking Screws Mounting to the Machine Clamp the shank at right angles to the axial center line of the machine. The knurl wheels of the knurling tool head should be set exactly on center. To adjust center-height: 1. Loosen the lock screws. 2. Turning the adjustment screw adjusts the head up or down. 3. Turn adjustment screw until the center height is aligned. 4. Lock head back in place by tightening the lock screws. 2) Move the knurling wheel to the end of the workpiece Set the cutting depth of the wheel (35% of the circular pitch) Start knurl Knurling Adjustment Set Up With the machine spindle rotating slowly, in-feed (Plunge) the tool to make a slight impression for the full width of the cutter. This impression should be equal on both wheels when using Diamond Knurling Head. Misaligned patterns can be corrected by turning the fine adjustment screw in opposite directions. 3) Use recommended cutting parameter Use coolant Knurling head center line adjustments R.H. Spiral Knurling tool is too low from center line. Top wheel is cutting a deeper R.H. Diagonal Knurl. Turn the ine Center Adjustment Screw until both wheels are on center and touching simultaneously. ull aced Cutting Knurl Wheel When cut knurling, a full faced knurl wheel must be used. The edge of the knurl wheel will be cut into the material to be knurled. A sharp edge must be kept to cut a clean and smooth knurl pattern. The knurl wheel can be reground once the edge is dull or chipped. Edge Prep ull aced L.H. Spiral Knurling tool is too high from center line. Bottom wheel is cutting a deeper L.H. Diagonal Knurl. Turn ine Center Adjustment Screw until both wheels are on center and touching simultaneously. Wheel Grinding When the cutting edges of the knurl wheel become dull, resharpen them by grinding the cutting face of both wheels evenly. You can also grind forming wheels to desired width, but bevel afterwards. Diamond Knurl Tool is on center line. Both wheels are touching simultaneously, cutting a perfect diamond knurl. Grind to the Thrustwasher Diameter R & M SERIES KNURL WHEEL Grind Cutting ace Only SW SERIES KNURL WHEEL Call: Visit: sales@doriantool.com 76

78 Easy to set up Simple to operate. To minimize set up time of knurling application, and simplify the knurling operation, the CNC Modular Knurling Tool has been engineered to create a diamond knurling pattern, without the need of reseting the knurl wheels every time the workpiece diameter changes. To cover the full range of diameter three modular cutting knurling head have been developed. 1) Small diameter modular head 2) Medium diameter modular head 3) Large diameter modular head Small Diameter Head Cutting Range Small Diameter Cutting Range from 12mm to 38mm End feed range: 0,10mm to 0,30mm Knurl cutting action Diamond Cutting Twin straight SW series knurl wheels for male diamond pattern Supplied with ull aced SW2S-30-HS knurl wheels - TiN coated Medium Diameter Head Medium Diameter Cutting Range from 25mm to 127mm End feed range:.rom 0,10mm to 0,40mm Knurl cutting action Diamond Cutting Two straight R series knurl wheels for male diamond pattern Supplied with ull aced RS-25-HS knurl wheels - TiN coated Large Diameter Head Large Diameter Cutting Range from 50mm & up End feed range: 0,10mm to 0,63mm Knurl cutting action Diamond Cutting Two straight M series knurl wheels for male diamond pattern Supplied with ull aced MS-25-HS knurl wheels - TiN coated How the diamond CNC Modular Knurling tool works. 1) Choose the cutting diameter range of the knurl head 2) Set the knurling wheel on centerline of the workpiece 3) Touch the workpiece diameter with the knurl wheels. 4) Set the depth of cut (35% of the circle pitch) 6) Start to cut recommended cutting parameter 77 Call: Visit: sales@doriantool.com

79 Center Height Adjustment Screw T L2 H C.H. S Lock Screw x3 L1 G CNC Modular Knurling Tool Shank Shank Metric C.H. & S mm G H L1 L2 T Adjustment Screw Lock Screw Set CNC-20* mm 5,4 50,0 114,3 123,8 25,4 CNC-25* mm - 50,0 114,3 123,8 25,4 CNC CNC-1024** CNC-32* mm - 57,2 127,0 136,5 25,4 * Supplied with lock screw set and adjustment screw ** One (1) set includes three (3) lock screws Lock Screw X1 Adjustment Screw H C.H. L2 L1 T S G Easy set-up High productivity Best knurl quality Long knurl wheel life Low production cost Specifically designed for the CNC Lathe Precision square shank with preset center height Right or Left hand applications Shanks and heads are all interchangeable High Speed knurl wheels (TiN coated) Carbide knurl pin Center height adjustment CNC Small Modular Knurling Tool Shank Shank metric C.H. & S G H L1 L2 T Adjustment Screw Lock Screw Set of 3 SCNC ,4 25,4 63,5 68,2 19,1 SCNC ,4 25,4 69,9 74,5 19,1 SCNC SCNC SCNC ,0 28,6 69,9 74,5 19,1 * Modular shank supplied with adjustment screw and screw lock Call: Visit: sales@doriantool.com 78

80 1 Light Duty 60º Diamond Cutting Modular Knurling Head - CNCKH-1-2 Cutting Small Diameter Cutting Range 8mm to 38mm End feed range: rom 0,100mm to 0,30mm Knurl cutting action Twin straight SW series knurl wheels for male diamond pattern Supplied with ull aced SW2S-30-HS knurl wheels - TiN coated 6 Modular Shank Sizes 8 Modular Heads lexibility Multiple combinations Multiple applications Better performance Designed for the CNC Lathe Precision square shank with preset center height Right or Left hand applications Interchangeable shanks & heads High Speed knurl wheels (TiN coated) Supplied with heavy duty parts 2 Heavy Duty 60º Diamond Cutting Modular Knurling Head - CNCKH-2-R Cutting Cutting Medium Diameter Cutting Range 25mm to 125mm End feed range: rom 0,10mm to 0,40mm Knurl cutting action Two straight R series knurl wheels for male diamond pattern Supplied with ull aced RS-25-HS knurl wheels - TiN coated 3 Extra Heavy Duty 60º Diamond Cutting Modular Knurling Head - CNCKH-3-M Large Diameter Cutting Range 50mm & up End feed range: rom 0,10mm to 0,63mm Knurl cutting action Two straight M series knurl wheels for male diamond pattern Supplied with ull aced MS-25-HS knurl wheels - TiN coated 4 Double Wheel orming Knurling Modular Head - CNCKH-4-M orming Diameter Range: 8mm & up End feed range: rom 0,100mm to 0,30mm Knurl orming action Two M series knurl wheels for straight or diamond pattern Supplied with Beveled MDR/L-25-HSB knurl wheels - TiN coated 5 Single Wheel orming Modular Knurling Head - CNCKH-5-O orming Straight Bump Unlimited Diameter End feed range: rom 0,100mm to 0,30mm Knurl forming action Single O series knurl wheel for straight or diamond pattern Supplied with Beveled OS-25-HSB knurl wheel - TiN coated 6 Shoulder orming Modular Knurling Head - CNCKH-6-4 orming Diameter Range: 8mm & up End feed range: rom 0,100mm to 0,30mm Knurl forming action Two SW series knurl wheels for straight or diamond pattern Supplied with Beveled SW4R/L-25-HSB knurl wheels - TiN coated 7 Straddle orming Modular Knurling Head - CNCKH-7-R orming Diameter Range: 25mm End feed range: rom 0,100mm to 0,30mm Knurl forming action Two R series knurl wheels for straight or diamond pattern Supplied with Beveled RDR/L-30-HSB knurl wheels - TiN coated 7-2 Shoulder Style Straddle orming Modular Knurling Head - CNCKH-7-2 orming Diameter Range: up to 25mm End feed range: rom 0,100mm to 0,30mm Knurl forming action Two SW series knurl wheels for straight or diamond pattern Supplied with Beveled SW2R/L-30-HSB knurl wheels - TiN coated 79 Call: Visit: sales@doriantool.com

81 Cutting 1 Light Duty 60º Diamond Cutting Modular Knurling Head + CNC Modular Knurling Tool Shank Shank Tool Size mm Length Knurl Wheel CNC ,65 SW2 CNC ,65 SW2 CNC ,325 SW2 Knurl Pin Set Modular Head SW2.0P-2S CNCKH-1-2 Supplied with a set of ull aced straight high speed TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern. 2 Heavy Duty 60º Diamond Cutting Modular Knurling Head + CNC Modular Knurling Tool Shank Cutting Shank Tool Size mm Length CNC-20-2-R ,65 CNC-25-2-R ,65 CNC-32-2-R ,325 Knurl Wheel Series R Knurl Pin Set Supplied with a set of ull aced straight high speed knurl wheels, 25 TPI (1mm) for a male diamond pattern. Modular Head KPS C CNCKH-2-R 3 Extra Heavy Duty 60º Diamond Cutting Modular Knurling Head + CNC Modular Knurling Tool Shank Cutting Shank Tool Size mm Length CNC-20-3-M ,8 CNC-25-3-M ,8 CNC-32-3-M ,5 Knurl Wheel Knurl Pin Set Modular Head Series M KPS C CNCKH-3-M Supplied with a set of ull aced straight high speed TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern orming 4 Double Wheel orming Modular Knurling Head + CNC Modular Knurling Tool Shank Shank Tool Size mm Length CNC-20-4-M ,8 CNC-25-4-M ,8 CNC-32-4-M ,5 Knurl Wheel Knurl Pin Set Modular Head Series M KPS C CNCKH-4-M Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern. 5 Single Wheel orming Modular Knurling Head + CNC Modular Knurling Tool Shank orming Shank Tool Size mm Length CNC-20-5-O ,45 CNC-25-5-O ,45 CNC-32-5-O ,15 Knurl Wheel Knurl Pin Set Modular Head Series O KPS C CNCKH-5-O Supplied with one Beveled straight high speed beveled TiN coated knurl wheel, 25 TPI (1mm) for a straight pattern 6 Shoulder orming Modular Knurling Head + CNC Modular Knurling Tool Shank orming Shank Tool Size mm Length CNC ,45 CNC ,45 CNC ,15 Knurl Wheel Knurl Pin Set Modular Head Series SW4 SW4.0P-2S CNCKH-6-4 Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern. 7-R Straddle orming Modular Knurling Head + CNC Modular Knurling Tool Shank orming Shank Tool Size mm Length CNC-20-7-R ,325 CNC-25-7-R ,325 CNC-32-7-R ,325 Knurl Wheel Knurl Pin Set Modular Head Series R KPS C CNCKH-7-R Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern. 7-2 Shoulder Style Straddle orming Knurling Head + CNC Modular Knurling Tool Shank orming Shank Tool Size mm Length CNC ,88 Knurl Wheel Knurl Pin Set Modular Head CNC ,88 Series SW2 SW2.0P-2S CNCKH-7-2 CNC ,675 Supplied with a set of Beveled diagonal high speed beveled TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern. Call: Visit: sales@doriantool.com 80

82 1 SMALL Light Duty 60º Diamond Cutting Modular Knurling Head - SCNCKH Modular Shank Sizes 4 Modular Heads Cutting Small Cutting Range 8mm to 38mm End feed range: rom 0,100mm to 0,30mm Knurl cutting action Twin straight SW series knurl wheels for male diamond pattern Supplied with full faced SW2S-30-HS knurl wheels - TiN coated lexibility Multiple combinations Multiple applications Better performance Designed for the CNC Lathe Precision square shank with preset center height Right or Left hand applications Interchangeable shanks & heads High Speed knurl wheels (TiN coated) Supplied with heavy duty parts 6 SMALL Shoulder orming Modular Knurling Head - SCNCKH-6-2 orming Diameter Range: 6,4mm & up End feed range: rom 0,100mm to 0,30mm Knurl forming action Twin SW series knurl wheels for straight or diamond pattern Supplied with beveled SW2R/L-25-HSB knurl wheels - TiN coated 7-R SMALL Straddle orming Modular Knurling Head - SCNCKH-7-D orming Diameter Range: up to 16mm End feed range: rom 0,100mm to 0,30mm Knurl forming action Twin D series knurl wheels for straight or diamond pattern Supplied with beveled DR/L-30-HSB knurl wheels - TiN coated 7-2 SMALL Shoulder Style Straddle orming Modular Knurling Head - SCNCKH-7-2 orming Diameter Range: up to 16mm End feed range: rom 0,100mm to 0,30mm Knurl forming action Twin SW series knurl wheels for straight or diamond pattern Supplied with beveled SW2R/L-30-HSB knurl wheels - TiN coated 81 Call: Visit: sales@doriantool.com

83 1 SMALL Light Duty 60º Diamond Cutting Modular Knurling Head + SMALL CNC Modular Knurling Tool Shank Shank Size mm Tool Length Knurl Wheel Knurl Pin Set Modular Head SCNC ,6 SW2 Cutting SCNC ,95 SW2 SW2.0P-2S SCNCKH-1-2 SCNC ,95 SW2 Supplied with a set of ull aced straight high speed TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern 6 SMALL Shoulder orming Modular Knurling Head + SMALL CNC Modular Knurling Tool Shank Shank Size mm Tool Length Knurl Wheel Knurl Pin Set Modular Head orming SCNC ,6 SCNC ,95 SCNC ,95 Series SW4 SW2.0P-2S SCNCKH-6-2 Supplied with a set of Beveled diagonal high speed TiN coated knurl wheels, 25 TPI (1mm) for a male diamond pattern 7-R SMALL Straddle orming Modular Knurling Head + SMALL CNC Modular Knurling Tool Shank Shank Size mm Tool Length Knurl Wheel Knurl Pin Set Modular Head orming SCNC-10-7-D ,3 SCNC-12-7-D ,65 SCNC D ,65 Series R KPS C SCNCKH-7-D Supplied with a set of Beveled diagonal high speed TiN coated knurl wheels, 30 TPI (8mm) for a male diamond pattern 7-2 SMALL Shoulder Style Straddle orming Modular Knurling Head + SMALL CNC Modular Knurling Tool Shank Shank Size mm Tool Length Knurl Wheel Knurl Pin Set Modular Head SCNC ,3 orming SCNC ,65 Series SW2 SW2.0P-2S SCNCKH-8-2 SCNC ,65 Supplied with a set of Beveled diagonal high speed TiN coated knurl wheels, 30 TPI (.8mm) for a male diamond pattern Call: Visit: sales@doriantool.com 82

84 Self Centering orming SCKN - Self-Centering Knurling Tool HDSCKN Heavy Duty Self-Centering Knurling Tool Reversible Direction Knurl Pin Set Knurl Wheel Shank Size SCKN-10-DW-D D * KPS SCKN-12-DW-D D * KPS SCKN-162-DW-D D * KPS SCKN-20-DW-M M ** KPS SCKN-25-DW-M M ** KPS SCKN-32-DW-M M ** KPS HDSCK-20-DW-O O ** KPS C HDSCK-25-DW-O O ** KPS C HDSCK-25-DW-P P ** KPS C HDSCK-32-DW-P P ** KPS C Supplied with one (1) set of beveled diagonal high speed knurl wheels, *30 TPI, **25 TPI *** Warning: May cause deflections on small part diameters, and too much pressure on large diameters Self Centering orming SSCK - Shoulder Self-Centering Knurling Tool Reversible Direction Knurl Pin Set Knurl Wheel Shank Size SSCK-10-DW SW2 * SW2.0P-2S SSCK-12-DW SW2 * SW2.0P-2S SSCK-162-DW SW2 * SW2.0P-2S SSCK-20-DW SW4 ** SW4.0P-2S SSCK-25-DW SW4 ** SW4.0P-2S SSCK-32-DW SW4 ** SW4.0P-2S Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels, *30 TPI, **25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters Self Centering orming 3SHKT - Three Swivel Head Knurling Tool Reversible Direction Knurl Wheel Knurl Pin Set Shank Size 3SHKT-12-D D * KPS SHKT-162-D D * KPS SHKT-20-M M ** KPS SHKT-25-M M ** KPS SHKT-32-M M ** KPS * Supplied with three (3) sets of beveled diagonal right and diagonal left high speed TiN coated knurl wheels, 20 TPI, 30 TPI, 40 TPI ** Supplied with three (3) sets of beveled diagonal right and diagonal left high speed TiN coated knurl wheels, 16 TPI, 25 TPI, 35 TPI. *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters ixed orming KT - ixed orming Knurling Tool Knurl Wheel Knurl Pin Set Shank Size KT-10-D KPS KT-12-D KPS KT-162-D KPS KT-20-M KPS KT-25-M KPS KT-32-O KPS Supplied with one (1) set of diagonal high speed beveled TiN coated knurl wheels, *30 TPI, ** 25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters ixed orming SKT - Shoulder ixed orming Knurling Tool Knurl Wheel Knurl Pin Set Shank Size SKT SW2 * SW2.0P-2S SKT SW2 * SW2.0P-2S SKT SW2 * SW2.0P-2S SKT SW4 ** SW4.0P-2S SKT SW4 ** SW4.0P-2S SKT SW4 ** SW4.0P-2S Suppled with one (1) set of beveled diagonal high speed TiN coated knurl wheels, * 30 TPI (0.8mm), ** 25 TPI (1.0mm) *** Warning: May cause deflections on small part diameters, and too much pressure on large diameters ixed orming SWKT - Single Wheel ixed orming Knurling Tool HDSWKT - Heavy Duty Single Wheel ixed orming Knurling Tool Knurl Pin Set Knurl Wheel Shank Size SWKT-831-B B * KPS SWKT-10-D D * KPS SWKT-12-D D * KPS SWKT-162-D D * KPS SWKT-20-M M ** KPS SWKT-25-O O ** KPS SWKT-32-O O ** KPS HDSWKT-20-O O ** KPS C HDSWKT-25-P P ** KPS C HDSWKT-32-P P ** KPS C Supplied with one (1) straight high speed beveled TiN coated knurl wheel, *30 TPI, **25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters 83 Call: Visit: sales@doriantool.com

85 ixed orming SSWKT - Single Shoulder Wheel ixed orming Knurling Tool Knurl Pin Set Knurl Wheel Shank Size SSWKT SW2 * SW2.0P-1S SSWKT SW2 * SW2.0P-1S SSWKT SW2 * SW2.0P-1S SSWKT SW4 ** SW4.0P-1S SSWKT SW4 ** SW4.0P-1S SSWKT SW4 ** SW4.0P-1S Suppled with one (1) beveled straight high speed TiN coated knurl wheel, * 30 TPI (0.8mm), ** 25 TPI (1.00mm) *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters ixed Cutting 107ST - Straight Cutting Knurling Tool With A Square Shank or CNC Knurl Pin Set Knurl Wheel Shank Size R.H. LH. 107ST-12-R-RH/LH RDL* KPS C ST-162-R-RH/LH RDL* KPS C ST-20-M-RH/LH MDL** KPS C ST-25-M-RH/LH MDL** KPS C ST-32-M-RH/LH MDL** KPS C Supplied with one (1) full faced diagonal left high speed TiN coated knurl wheel, * 30 TPI, ** 25 TPI *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters ixed Cutting 107ST - Straight Cutting Shoulder Knurling Tool With A Square Shank or CNC Knurl Pin Set Knurl Wheel Shank Size R.H. LH. 107ST-12-2-R/L SW2L* SW2.0P-1S ST R/L SW2L* SW2.0P-1S ST-20-4-R/L SW4L** SW4.0P-1S ST-25-4-R/L SW4L** SW4.0P-1S ST-32-4-R/L SW4L** SW4.0P-1S Supplied with one (1) full faced diagonal left high speed TiN coated knurl wheel, * 30 TPI (.8mm), ** 25 TPI (1.0mm) *** Warning: May cause deflection on small part diameters, and too much pressure on large diameters ixed orming ACEKT - ace orming Knurling Tool Knurl Pin Set Knurl Wheel Shank Size ACEKT SW2 * SW2.0P-1S ACEKT SW2 * SW2.0P-1S ACEKT SW4 ** SW4.0P-1S ACEKT SW4 ** SW4.0P-1S Supplied with one (1) beveled straight high speed TiN coated knurl wheel, * 30 TPI (.8mm), ** 25 TPI (1.0mm) *** Limited band width from knurl wheel orming TIKT - True Internal orming Knurling Tool Knurl Wheel Knurl Pin Set Shank Size TIKT-12-B B * KPS TIKT-20-D D * KPS TIKT-25-R R ** KPS TIKT-32-M M ** KPS Supplied with one (1) set of beveled diagonal high speed knurl wheels, *30 TPI, **25 TPI *** Warning: May cause deflections on small part diameters, and too much pressure on large diameters orming SIKT - Shoulder Internal orming Knurling Tool Knurl Pin Set Knurl Wheel Shank Size - SIKT SW2 * SW2.0P-1S SIKT SW4 ** SW4.0P-1S SIKT SW4 ** SW4.0P-1S SIKT SW4 ** SW4.0P-1S Supplied with one (1) beveled straight high speed TiN coated knurl wheel, * 30 TPI, ** 25 TPI. orming MMKT - Milling Machine orming Knurling Tool Knurl Pin Set Knurl Wheel Shank Size - MMKT-10-D D * KPS MMKT-12-R R ** KPS MMKT-20-O O ** KPS MMKT-25-O O ** KPS MMKT-32-P P ** KPS Supplied with one (1) beveled straight high speed TiN coated knurl wheel, *30 TPI (0.8mm), **25 TPI (1.0mm) Call: Visit: sales@doriantool.com 84

86 Through orming KTM109 Heavy Duty Style Straddle Square Shank Knurling Tool Reversible Direction Diameter Knurl Arm Set Shank Knurl Wheel Range*** Supplied Optional Size KTM M M* W M W KTM M mm M* W M W KTM M M* W M W KTM M M* W M W KTM M ,2-63mm M* W M W KTM M M* W M W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible Shoulder orming KTW109 Shoulder Style Straddle Square Shank orming Knurling Tool Reversible Direction Diameter Knurl Arm Set Shank Knurl Wheel Range*** Supplied Optional Size KTW SW4* W W M 20 KTW mm SW4* W W M 25 KTW SW4* W W M 32 KTW SW4* W M W KTW ,2-63mm SW4* W M W KTW SW4* W M W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible Through orming KTO Heavy Duty Style Straddle Square Shank Knurling Tool Reversible Direction Diameter Knurl Arm Set Shank Knurl Wheel Range*** Supplied Optional Size KTO O O* W O W KTO O mm O* W O W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: Physically applying a knurl on small diameters may not be possible Shoulder orming KTW Shoulder Style Straddle Square Shank Knurling Tool Reversible Direction Diameter Knurl Arm Set Shank Knurl Wheel Range*** Supplied Optional Size KTW SW4* W W O 25 KTW mm SW4* W W O 32 * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels for a male diamond pattern, 25 TPI ***Warning: Physically applying a knurl on small diameters may not be possible Through orming CNC109-M Side Mount lange Style Square Shank Knurling Tool Diameter Knurl Arm Set Shank Knurl Wheel Range*** Supplied Optional Size CNC M-R/L M* W M W CNC M-R/L mm M* W M W CNC M-R/L M* W M W CNC M-R/L M* W M W CNC M-R/L ,2-63,5mm M* W M W CNC M-R/L M* W M W * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels, 25 TPI *** Warning:This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible Shoulder orming CNC109-4 Side Mount Shoulder Style Square Shank Knurling Tool Diameter Knurl Arm Set Shank Knurl Wheel Range*** Supplied Optional Size CNC R/L SW4* W W M 20 CNC R/L mm SW4* W W M 25 CNC R/L SW4* W W M 32 CNC R/L SW4* W W M 20 CNC R/L ,2-63,5mm SW4* W W M 25 CNC R/L SW4* W W M 32 * Supplied with one (1) set of beveled diagonal high speed TiN coated knurl wheels, 25 TPI *** Warning: This tool has the capability to adjust the wheels until they touch, but physically applying a knurl on small diameters may not be possible 85 Call: Visit: sales@doriantool.com

87 Diametral orming Knurling Tools A diametral adjustment screw regulates the depth of the knurl pattern and the diameter size. The floating head will allow the knurl wheel to self adjust on the work piece - even when the work piece is not perfectly concentric. However, the tool can be used for twin wheel applications or single wheel knurling applications. This tool comes with a square shank to be used on open slot tool holders, or on a square index turret, with a preset center height adjustment which will meet the fixed center height of the CNC and the turret lathe. Body and shank are made of heat-treated, precision ground alloy steel. The dovetail guide ensures the most precise accuracy and rigidity for infinite diameter settings. Heavy Duty Style orming Knurling Tool Straddle application is best when pressure and deflection are a problem. The knurling arms are able to "float" somewhat and center on the workpiece, compensating for any off-centering. It has been developed to make a perfect knurling pattern without putting any pressure on the spindle or on the lathe compound. Uses 2 wheels for straight pattern Uses 2 wheels for 60º diamond pattern 1 Diag. Lt. 1 Diag. Rt. Bump application is best for narrow knurling applications. The knurling arms are moved closer together so that the tool can "bump" against the side of the working part with two wheels touching the part. Single wheel application is best for narrow and quick knurling setup. The knurling arms are moved up so that the bottom knurling wheel is locked on center and can "bump" against the side of the working part. With one wheel touching the part, this configuration allows for a quicker setup and knurling of narrow knurling applications. Knurl wheels are supported in a flanged nest to offer best rigidity to handle heavy duty knurling. The knurl wheels are mounted between thrust washers to insure a smooth and even rotation while knurling is performed. Shoulder Style orming Knurling Tool Uses 2 wheels for straight pattern Uses 2 wheels for 60º diamond pattern 1 Diag. Lt. 1 Diag. Rt. Straddle application is best when pressure and deflection are a problem. The knurling arms are able to "float" somewhat and center on the workpiece, compensating for any off-centering. It has been developed to make a perfect knurling pattern without putting any pressure on the spindle or on the lathe compound. Designed to knurl against a square shoulder. The knurl wheels are mounted on a thrust washer to insure a smooth and even rotation while knurling is performed. The wheels are held at slight pitch to the work part for better end feeding (feeding across the part towards the chuck). Knurling Tool Shank Mounting Standard Tool Shank CNC Side Mounting Shank T Set Screw Knurl Wheel Locking Shim or Standard to Mounting T Set Screw Knurl Wheel Locking Shim or restricted indexing clearance of the CNC Turret Call: Visit: Knurl sales@doriantool.com Locking Screws 86 Pin Set

88 3 WHEEL KNURLING TOOL OR CUTTING & ORMING Infinite Lengths with Diameters Small as 2,16mm to 38mm Heavy Duty Shoulderless Carbide Pin High Speed Pin PROPERTIES 1. or small diameters When side pressure does not allow the use of a one or two wheel knurling tool. 2. or long lengths When support or live center is not permissible. The part would deflect if a standard one or two wheel knurling tool is used. 3. or high precision knurling When the finished diameter of the knurled part demands close tolerance. The three wheel knurling system applies less pressure per wheel controlling the displacement and the form of the material. This makes the knurl uniform and precise. 4. or high production High production without sacrificing performance and quality. 5. or automation When cost is a factor. The high performance of this tool will keep the manufacturing cost lower. 6. Which machine to use on Automatic Screw Machines, CNC Lathes, and Turret Lathes. EATURES: Minimum diameter 2,16mm Maximum diameter 38,1mm or straight or diamond knurl Infinite lengths Precise scroll gear ine diameter adjustment Dial allows for visual diameter adjustment Knurl to a shoulder Self-adjust to parts and tool misalignment Easy to setup Simple to operate Manual knurl diameter release for manual lathes 3WSKT -Three wheel knurling tool with optional round or square shanks Resulting Knurl Pattern Recommended Use: Made of heat treated precision ground alloy steel. The dovetail guide and adjustable arms ensure the most possible accuracy and rigidity. A precise scroll gear allows for fine diameter settings. Scaled dial makes setting the diameter easy. This tool is engineered for most demanding knurling jobs in Screw Machine, C.N.C. Lathe, and Turret Lathe Applications. Square shank can be reversed for right hand or left hand operation. Square shank with preset center height. Straight pattern with 3 straight wheels Male 60º diamond pattern with diagonal wheels (2 Right & 1 Left or 2 Left & 1 Right) or best results, use beveled knurl wheels. End-feed the knurling tool into the blank until the desired length of the knurl is done. The Three Wheel Knurling Tool can knurl up to a shoulder, minimum diameter of 2,16mm up to 38,1mm diameter, and infinite lengths. The Heavy Duty Three Wheel Knurling Tool is recommended for shoulderless applications for improved wheel life. 87 Call: Visit: sales@doriantool.com

89 3 Wheel Knurling Tool Head to the Shoulder Knurling diameter setting Round Shank Shank Mounting Open L Use to Adjust the knurl Diameter Close H Square Shank Capacity H L Specifications Optional Square Shank Optional Round Shank Knurl Wheel Style Knurl Pin Set*** Shank Size Shank Size Square Length Dia. Length 3WSKT mm 75mm 3WRKT mm 75mm 3WKT ,16mm to 6,4mm 44,5mm 40,0mm SW2 * SW2.0P-3S WSKT mm 88mm 3WRKT mm 88mm 3WSKT mm 100mm 3WRKT mm 100mm 3WSKT mm 88mm 3WRKT mm 88mm 3WKT ,16mm to 12,7mm 57,2mm 40,0mm SW2 * SW2.0P-3S WSKT mm 100mm 3WRKT mm 100mm 3WSKT mm 125mm 3WRKT mm 125mm 3WKT ,2mm to 25,4mm 76,2mm 40,0mm SW2 * SW2.0P-3S WSKT mm 100mm 3WRKT mm 100mm 3WSKT mm 125mm 3WRKT mm 125mm 3WKT ,75mm to 38,1m 108mm 62,0mm SW2 * SW2.0P-3S WSKT mm 125mm 3WRKT mm 125mm Open 3-Wheel Knurling Tool Heavy Duty Shoulderless Close H L 3 Wheel Knurling Tool Head Specifications Optional Square Shank Optional Round Shank Capacity H L Knurl Wheel Style Knurl Pin Set*** Shank Size Shank Size Square Length Dia. Length 3WKT-40-M ,75mm to 38,1m 108mm 67,2mm M** SM4.0P-3S WSKT mm 125mm 3WRKT mm 125mm Knurl Tool Head and Optional Shanks are Sold Separately * Supplied with one (1) set of two (2) diagonal right and one (1) diagonal left beveled high speed TiN coated knurl wheels, 30 TPI (0,8mm) ** Supplied with one (1) set of two (2) diagonal right and one (1) diagonal left beveled high speed TiN coated knurl wheels, 25 TPI (1,0mm) *** One (1) set consists of three (3) knurling pins and washers Call: Visit: sales@doriantool.com 88

90 Knurling Wheel Tooth Pattern & Workpiece Knurl Pattern Straight Tooth 30º Diagonal Helix Angle 60º Diamond Angle R.H. L.H. Male emale End-feed End-feed End-feed End-feed End-feed In-feed In-feed In-feed In-feed In-feed Edge Prep ull aced Beveled Edge ull aced: Sharp leading edge for Cutting Type knurling tools only. Beveled Edge: Edge security for forming type knurling tools only. Knurl Wheel Material High Speed Steel Knurl Wheels: Tough and shock resistant. Best recommended for materials such as Carbon Steel, Alloy Steel, and Stainless Steel. Cobalt Knurl Wheels: The 8.5% cobalt content adds hardness and wear resistance to the wheels. Best recommended for abrasive and soft materials such as ree Machining Steel, Aluminum, and nonferrous materials Circular Pitch (inch & mm) 1" 90º Knurl Wheel Series Pattern Grade Edge Prep 2,5mm 2mm 1,8mm 1,6mm 1,2mm 1,0mm 0,8mm 0,7mm 0,6mm 0,5mm 0,3mm A 6,3mm 19,0mm 9,5mm B 3,1mm 7,9mm 4,0mm C 4,7mm 12,7mm 4,7mm AS-TPI-HS High Speed Sharp Corner AS-TPI-HSB TiN Coated Beveled Corner Straight AS-TPI-C Cobalt Sharp Corner AS-TPI-CB TiN Coated Beveled Corner ADR-TPI-HS High Speed Sharp Corner ADR-TPI-HSB Diagonal TiN Coated Beveled Corner ADR-TPI-C Right Cobalt Sharp Corner ADR-TPI-CB TiN Coated Beveled Corner ADL-TPI-HS High Speed Sharp Corner ADL-TPI-HSB Diagonal TiN Coated Beveled Corner ADL-TPI-C Left Cobalt Sharp Corner ADL-TPI-CB TiN Coated Beveled Corner AM-TPI-HS Male High Speed Sharp Corner AM-TPI-HSB Diamond TiN Coated Beveled Corner A-TPI-HS emale High Speed Sharp Corner A-TPI-HSB Diamond TiN Coated Beveled Corner BS-TPI-HS High Speed Sharp Corner BS-TPI-HSB TiN Coated Beveled Corner Straight BS-TPI-C Cobalt Sharp Corner BS-TPI-CB TiN Coated Beveled Corner BDR-TPI-HS High Speed Sharp Corner BDR-TPI-HSB Diagonal TiN Coated Beveled Corner BDR-TPI-C Right Cobalt Sharp Corner BDR-TPI-CB TiN Coated Beveled Corner BDL-TPI-HS High Speed Sharp Corner BDL-TPI-HSB Diagonal TiN Coated Beveled Corner BDL-TPI-C Left Cobalt Sharp Corner BDL-TPI-CB TiN Coated Beveled Corner CS-TPI-HS High Speed Sharp Corner CS-TPI-HSB TiN Coated Beveled Corner Straight CS-TPI-C Cobalt Sharp Corner CS-TPI-CB TiN Coated Beveled Corner CDR-TPI-HS High Speed Sharp Corner CDR-TPI-HSB Diagonal TiN Coated Beveled Corner CDR-TPI-C Right Cobalt Sharp Corner CDR-TPI-CB TiN Coated Beveled Corner CDL-TPI-HS High Speed Sharp Corner CDL-TPI-HSB Diagonal TiN Coated Beveled Corner CDL-TPI-C Left Cobalt Sharp Corner CDL-TPI-CB TiN Coated Beveled Corner CM-TPI-HS Male High Speed Sharp Corner CM-TPI-HSB Diamond TiN Coated Beveled Corner C-TPI-HS emale High Speed Sharp Corner C-TPI-HSB Diamond TiN Coated Beveled Corner NOTE: or forming-type knurling tools, beveled wheels are recommended for longer tool life. or cutting-type tools, full-face (sharp corner) wheels are the only choice. All Dorian Tool knurl wheels are PVD TiN coated to provide less friction and longer tool life. or a complete selection of knurling wheels, please refer to our general catalog. 89 Call: Visit: sales@doriantool.com Pitch

91 Knurl Wheel Series Pattern Grade Edge Prep 2,5mm 2mm 1,8mm 1,6mm 1,2mm 1mm 0,8mm 0,7mm 0,6mm 0,5mm 0,3mm D 4,7mm 12,7mm 4,0mm M 7,9mm 25,4mm 6,0mm O 7,9mm 25,4mm 9,5mm P 12,7mm 31,8mm 12,7mm DS-TPI-HS High Speed Sharp Corner DS-TPI-HSB TiN Coated Beveled Corner Straight DS-TPI-C Cobalt Sharp Corner DS-TPI-CB TiN Coated Beveled Corner DDR-TPI-HS High Speed Sharp Corner DDR-TPI-HSB Diagonal TiN Coated Beveled Corner DDR-TPI-C Right Cobalt Sharp Corner DDR-TPI-CB TiN Coated Beveled Corner DDL-TPI-HS High Speed Sharp Corner DDL-TPI-HSB Diagonal TiN Coated Beveled Corner DDL-TPI-C Left Cobalt Sharp Corner DDL-TPI-CB TiN Coated Beveled Corner D-TPI-HS emale High Speed Sharp Corner D-TPI-HS Diamond TiN Coated Beveled Corner D-TPI-C emale Cobalt Sharp Corner D-TPI-CB Diamond TiN Coated Beveled Corner MS-TPI-HS High Speed Sharp Corner MS-TPI-HSB TiN Coated Beveled Corner Straight MS-TPI-C Cobalt Sharp Corner MS-TPI-CB TiN Coated Beveled Corner MDR-TPI-HS High Speed Sharp Corner MDR-TPI-HSB Diagonal TiN Coated Beveled Corner MDR-TPI-C Right Cobalt Sharp Corner MDR-TPI-CB TiN Coated Beveled Corner MDL-TPI-HS High Speed Sharp Corner MDL-TPI-HSB Diagonal TiN Coated Beveled Corner MDL-TPI-C Left Cobalt Sharp Corner MDL-TPI-CB TiN Coated Beveled Corner M-TPI-HS emale High Speed Sharp Corner M-TPI-HSB Diamond TiN Coated Beveled Corner M-TPI-C emale Cobalt Sharp Corner M-TPI-CB Diamond TiN Coated Beveled Corner OS-TPI-HS High Speed Sharp Corner OS-TPI-HSB TiN Coated Beveled Corner Straight OS-TPI-C Cobalt Sharp Corner OS-TPI-CB TiN Coated Beveled Corner ODR-TPI-HS High Speed Sharp Corner ODR-TPI-HSB Diagonal TiN Coated Beveled Corner ODR-TPI-C Right Cobalt Sharp Corner ODR-TPI-CB TiN Coated Beveled Corner ODL-TPI-HS High Speed Sharp Corner ODL-TPI-HSB Diagonal TiN Coated Beveled Corner ODL-TPI-C Left Cobalt Sharp Corner ODL-TPI-CB TiN Coated Beveled Corner OM-TPI-HS Male High Speed Sharp Corner OM-TPI-HSB Diamond TiN Coated Beveled Corner O-TPI-HS emale High Speed Sharp Corner O-TPI-HSB Diamond TiN Coated Beveled Corner PS-TPI-HS High Speed Sharp Corner PS-TPI-HSB TiN Coated Beveled Corner Straight PS-TPI-C Cobalt Sharp Corner PS-TPI-CB TiN Coated Beveled Corner PDR-TPI-HS High Speed Sharp Corner PDR-TPI-HSB Diagonal TiN Coated Beveled Corner PDR-TPI-C Right Cobalt Sharp Corner PDR-TPI-CB TiN Coated Beveled Corner PDL-TPI-HS High Speed Sharp Corner PDL-TPI-HSB Diagonal TiN Coated Beveled Corner PDL-TPI-C Left Cobalt Sharp Corner PDL-TPI-CB TiN Coated Beveled Corner PM-TPI-HS Male High Speed Sharp Corner PM-TPI-HSB Diamond TiN Coated Beveled Corner P-TPI-C emale High Speed Sharp Corner P-TPI-CB Diamond TiN Coated Beveled Corner NOTE: or forming-type knurling tools, beveled wheels are recommended for longer tool life. or cutting-type tools, full-face (sharp corner) wheels are the only choice. All Dorian Tool knurl wheels are PVD TiN coated to provide less friction and longer tool life. or a complete selection of knurling wheels, please refer to our general catalog. Pitch Call: Visit: sales@doriantool.com 90

92 Knurl Wheel Series Pattern Grade Edge Prep 2,5mm 2mm 1,8mm 1,6mm 1,2mm 1mm 0,8mm 0,7mm 0,6mm 0,5mm 0,3mm R 6,3mm 19,0mm 5,0mm S 6,3mm 19,0mm 6,3mm SW2 RS-TPI-HS High Speed Sharp Corner RS-TPI-HSB TiN Coated Beveled Corner Straight RS-TPI-C Cobalt Sharp Corner RS-TPI-CB TiN Coated Beveled Corner RDR-TPI-HS High Speed Sharp Corner RDR-TPI-HSB Diagonal TiN Coated Beveled Corner RDR-TPI-C Right Cobalt Sharp Corner RDR-TPI-CB TiN Coated Beveled Corner RDL-TPI-HS High Speed Sharp Corner RDL-TPI-HSB Diagonal TiN Coated Beveled Corner RDL-TPI-C Left Cobalt Sharp Corner RDL-TPI-CB TiN Coated Beveled Corner R-TPI-HS emale High Speed Sharp Corner R-TPI-HSB Diamond TiN Coated Beveled Corner R-TPI-C emale Cobalt Sharp Corner R-TPI-CB Diamond TiN Coated Beveled Corner SS-TPI-HS High Speed Sharp Corner SS-TPI-HSB TiN Coated Beveled Corner Straight SS-TPI-C Cobalt Sharp Corner SS-TPI-CB TiN Coated Beveled Corner SDR-TPI-HS High Speed Sharp Corner SDR-TPI-HSB Diagonal TiN Coated Beveled Corner SDR-TPI-C Right Cobalt Sharp Corner SDR-TPI-CB TiN Coated Beveled Corner SDL-TPI-HS High Speed Sharp Corner SDL-TPI-HSB Diagonal TiN Coated Beveled Corner SDL-TPI-C Left Cobalt Sharp Corner SDL-TPI-CB TiN Coated Beveled Corner SM-TPI-HS Male High Speed Sharp Corner SM-TPI-HSB Diamond TiN Coated Beveled Corner S-TPI-HS emale High Speed Sharp Corner S-TPI-HSB Diamond TiN Coated Beveled Corner SW2S-TPI-HS High Speed Sharp Corner SW2S-TPI-HSB TiN Coated Beveled Corner Straight SW2S-TPI-C Cobalt Sharp Corner SW2S-TPI-CB TiN Coated Beveled Corner SW2R-TPI-HS 6,3mm High Speed Sharp Corner ,7mm SW2R-TPI-HSB Diagonal TiN Coated Beveled Corner SW2R-TPI-C Right Cobalt Sharp Corner mm SW2R-TPI-CB TiN Coated Beveled Corner ,3mm SW2L-TPI-HS High Speed Sharp Corner SW2L-TPI-HSB Diagonal TiN Coated Beveled Corner SW2L-TPI-C Left Cobalt Sharp Corner SW2L-TPI-CB TiN Coated Beveled Corner SW2-TPI-HS emale High Speed Sharp Corner SW2-TPI-HSB Diamond TiN Coated Beveled Corner SW2-TPI-C emale Cobalt Sharp Corner SW2-TPI-CB Diamond TiN Coated Beveled Corner SW4 SW4S-TPI-HS High Speed Sharp Corner SW4S-TPI-HSB TiN Coated Beveled Corner Straight SW4S-TPI-C Cobalt Sharp Corner SW4S-TPI-CB TiN Coated Beveled Corner ,7mm 25,4mm SW4R-TPI-HS High Speed Sharp Corner SW4R-TPI-HSB Diagonal TiN Coated Beveled Corner ,4mm SW4R-TPI-C Right Cobalt Sharp Corner ,5mm SW4R-TPI-CB TiN Coated Beveled Corner SW4L-TPI-HS High Speed Sharp Corner SW4L-TPI-HSB Diagonal TiN Coated Beveled Corner SW4L-TPI-C Left Cobalt Sharp Corner SW4L-TPI-CB TiN Coated Beveled Corner SW4-TPI-HS emale High Speed Sharp Corner SW4-TPI-HSB Diamond TiN Coated Beveled Corner SW4-TPI-C emale Cobalt Sharp Corner SW4-TPI-CB Diamond TiN Coated Beveled Corner NOTE: or forming-type knurling tools, beveled wheels are recommended for longer tool life. or cutting-type tools, full-face (sharp corner) wheels are the only choice. All Dorian Tool knurl wheels are PVD TiN coated to provide less friction and longer tool life. or a complete selection of knurling wheels, please refer to our general catalog. Pitch 91 Call: Visit: sales@doriantool.com

93 MILLING CUTTERS AND INSERTS ACE MILLING CORNER ROUNDING CHAMERING DOVETAIL T-SLOT WOODRU KEY SEAT SLOT MILLING SHOULDER MILLING Call: Visit:

94 Convex Radius Cutter - Cutting Rake - 15 for 15 positive square convex radius SDGX inserts d C R H R D1 D 90 R-Range C D D1 d H Min. Max. Qty. SDGX Gage Torx Screw Torx Key QV-16-S ,2 15,9 12, ,4 0,4 1,6 QV-16-S ,5 15,9 12, ,4 0,4 1,6 1 09T308 TS-4.7-8M1 T-15 QV-25-S ,9 25,4 19, ,4 2,0 3,2 1 QV-25-S ,1 25,4 19, ,6 2,0 3, TS M1 T-20 QV-25-S ,9 25,4 16, ,4 2,0 4,8 1 QV-25-S ,1 25,4 16, ,6 2,0 4, TS M1 T-20 QV-50-S ,3 50,8 41, ,8 2,0 4,8 3 QV-25-S ,9 25,4 13, ,4 3,6 6,4 1 QV-25-S ,1 25,4 13, ,6 3,6 6, TS M1 T-20 QV-50-S ,3 50,8 38, ,8 3,6 6,4 3 45º Dove Tail - Cutting Rake - 11 for 11 positive TDEX inserts. d C H D 45 C D d H Qty. TDEX Gage Torx Screw Torx Key D45X-12-TD ,7 12,7 10 3,2 2,9 1 D45X-20-TD ,7 19,1 10 4,0 5, TS M1 T-7 D45X-25-TD ,3 25,4 12 6,3 5,7 3 D45X-25-TD ,2 34, ,1 9,1 2 D45X-50-TD ,2 47, ,1 10,4 3 D45X-60-TD ,9 57, ,9 16,7 2 D45X-65-TD ,9 63, ,5 16,8 3 17T304 TS-4.7-8M1 T TS M1 T Call: Visit: sales@doriantool.com

95 60 Dove Tail Cutter - Cutting Rake - 15 for 15 positive triangle TDEX inserts. d C 30 H D 60 C D d H Qty. TDEX Gage Torx Screw Torx Key D60X-12-TD ,7 12,7 10 8,3 3,6 1 D60X-20-TD ,7 19,1 10 8,3 7, TS M1 T-7 D60X-25-TD ,7 25,4 12 8,3 9,5 3 D60X-35-TD ,7 34, ,0 14, TS-4.7-8M1 T-15 D60X-50-TD ,2 47, ,0 14, TS M1 T-15 D60X-60-TD ,9 57, ,8 19,1 3 D60X-65-TD ,9 63, ,8 19, TS M1 T-20 15º Dove Tail - Cutting Rake - 15 for 15 positive TDEX inserts. d 15 C H D 75 C D d H Qty. TDEX Gage Torx Screw Torx Key D15X-12-TD ,5 12,7 10 9,1 10, TS M1 T-7 D15X-25-TD ,5 25,4 12 9,1 10,7 3 D15X-50-TD ,2 47, ,0 19, TS M1 T-15 D15X-65-TD ,3 63, ,1 25, TS M1 T-20 Double 30 Indexable Chamfer Mill Cutting Rake - 15 for 15 positive triangle TDEX inserts d C 30 H D C D d H Qty. TDEX Gage Torx Screw Torx Key C60-20-TD ,7 19,1 10 5,2 10,4 1 C60-25-TD ,7 25,4 12 5,2 10, TS M1 T-7 C60-35-TD ,7 34,9 16 5,2 10,4 3 C60-40-TD ,2 38,1 16 8,0 15,9 3 C60-50-TD ,2 47,6 20 8,0 15, TS-4.7-8M1 T-15 C60-65-TD ,9 63, ,7 21, TS M1 T-20 Call: Visit: sales@doriantool.com 94

96 WOODRU KEY SEAT CUTTER Cutting Rake - 20 for positive TEHW inserts d C D C D d Qty. TEHW Gage Torx Screw Torx Key DWKC-195-TE , TS-06 T-6 DWKC-196-TE , DWKC-225-TE , DWKC-226-TE , TS-06 T-6 DWKC-228-TE , DWKC-256-TE , TS-06 T-6 DWKC-286-TE , DWKC-288-TE , TS-06 T-6 DWKC-2810-TE , DWKC-328-TE , TS-06 T-6 DWKC-3210-TE , DWKC-4510-TE , TS-06 T-6 T-SLOT CUTTER Cutting Rake - 20 for positive TEHW/CEHW inserts d C N D H C D d H N No. s No.lutes Gage Torx Screw Torx Key SLOT-21-SP SLOT-25-SP SLOT-28-SP SPHX TS M2 T-15 SLOT-32-SP SLOT-36-SD SLOT-40-SD SDGW TS M1 T-20 SLOT-45-SD SLOT-50-SD Call: Visit: sales@doriantool.com

97 90 Aluminum Milling Cutter - Cutting Rake - 7 for 7 positive 35 diamond VCGT inserts d C H D 90 End Mill C D d H Qty. VCGT Gage Torx Screw Torx Key E90-50-VC E90-50-VC TS M1 T Aluminum Milling Cutter - Cutting Rake - 7 for 7 positive 35 diamond VCGT inserts d H1 H C D ace Mill C D d H H1 Qty. VCGT Gage Torx Screw Torx Key E90A-50-VC ,3 10, TS-4.7-8M1 T-15 E90A-63-VC ,3 10,4 2 E90A-75-VC ,4 3 E90A-100-VC ,4 3 E90A-125-VC , TS M1 T Aluminum Milling Cutter - Cutting Rake - 7 for 7 positive trigon WCGT inserts d C D 90 H End Mill C D d H Qty. WCGT Gage Torx Screw Torx Key E90-32-WC , T308 TS M1 T-15 E90-50-WC , ace Mill C D d H H1 Qty. WCGT Gage Torx Screw Torx Key E90A-050-WC ,3 6,3 10,4 3 E90A-063-WC ,3 7 12,4 4 E90A-075-WC ,3 7 12,4 4 E90A-100-WC ,3 8 14,4 5 E90A-125-WC ,3 8 14,4 6 06T308 TS M1 T-15 Call: Visit: sales@doriantool.com 96

98 90 Aluminum Copy Mill - Cutting Rake - 11 for 11 positive VPGT inserts d C D H 90 End Mill C D d H Qty. VPGT Gage Torx Screw Torx Key E90XL-20-VP TS M1 T-7 E90XL-25-VP , E90XL-32-VP , E90XL-42-VP , TS-4.7-8M1 T Call: Visit: sales@doriantool.com

99 Recycle CNMG Turning Edges + 4 Milling Edges After the cutting edges are used on your turning tool holder, do not throw the insert away, it can be used in this milling cutter to utilize four more cutting edges that were not used in your lathe work. rom USED TURNING to NEW MILLING Used Turning New Milling 15 CNMG Recycle Milling Cutter - Cutting Rake - Negative 7 for Negative 80 diamond CNMG inserts d C H 15 D D1 End Mill C D D1 d H Qty. CNMG Gage Torx Screw Torx Key REC15-50-CN ,3 50,8 57, ,4 38, TS M1 T-20 REC15-50-CN ,0 50,8 57, ,4 38,1 d H1 H C D D1 15 ace Mill C D D1 d H H1 Qty. CNMG Gage Torx Screw Torx Key REC15A-076-CN ,5 76,2 82, ,4 7 12,4 5 REC15A-100-CN ,8 101,6 107, ,4 8 14,4 6 REC15A-125-CN ,8 127,0 132, ,4 9 16, TS M1 T-20 Call: Visit: sales@doriantool.com 98

100 Milling Grade Nomenclature DPC20HM D P C 20 H M D 1 Dorian P 2 Material Designation C 3 Coating 20 4 ISO-Hardness H 5 Cutting Application M 6 Machining Operation 1 Name Brand 3 Coating 5 Cutting Application Dorian U Uncoated H High Speed Application C G General Application P PVD Coating U Universal Application R Low Speed Application S Tough & Unstable Application 2 Material Designation 4 ISO-Hardness & Toughness 6 Machining Operation P Carbon & Alloy Steel HT 10 T Turning M Stainless Steel HT 15 S Threading K Cast Iron HT 20 D Drilling N Aluminum & Non ferrous Materials HT 25 G Turning & Grooving S High Temp & Supper Alloys HT 30 P Parting Off H Hardened Material HT 35 M Milling U Multi Material HT 40 Material Grade ISO Grade ANSI Grade Specification DPC20HM HC-P20 C7 Multi Coated CVD, Very Hard, Wear and Abrasive Resistant, ace and Plain Milling, for Carbon and Alloy Steel, Very High Cutting Speed in stable Milling conditions. Dry/Wet Cutting Carbon Steel Alloy Steel DPP25GM HC-P25 C6/C7 DPC30UM HC-P30 C6 DPP35RM HC-P35 C5/6 Coated PVD, Multi Purpose Milling, for Carbon, Alloy Steel & Stainless Steel, Very High Cutting Speed in stable Milling conditions. Dry/Wet Cutting Multi Coated CVD, Hard, Wear Resistant & Tough Substrate, Universal Milling, for Carbon, Alloy Steel & Stainless Steel, High Cutting Speed in stable Milling conditions Dry Cutting Coated PVD, Wear and Impact Resistant & Very Tough Substrate, Difficult Milling, for orging & Casting Carbon, Alloy Steel & Stainless Steel. Dry Cutting DPP40SM HC-P40 C5 Coated PVD, Tough and Impact Resistant Substrate, Very Difficult Milling, for orgings & Castings of Alloy Steel & Stainless Steel, Low to Medium Cutting Speed in unstable conditions. Dry Cutting Stainless Steel Cast Iron DMP35UM HC-M35 C5/6 DMP40RM HC-M40 C5 DKC15HM HC-K15 C2 DKP20UM HC-K20 C3 Coated PVD, Wear and Impact Resistant, Micrograin Substrate for high stability, or Universal, Stainless Steel & Austenitic Stainless Steel, Medium Cutting Speed in stable Milling conditions. Dry/Wet Coated PVD, Wear, Tough and Impact Resistant, Micrograin Substrate for high stability, Multi Purpose, for Austenitic Duplex Stainless Steel, Medium Cutting Speed in stable Milling conditions. Dry/Wet Coated Multi Layer CVD, Very Hard & Wear Resistant Substrate with Very hard and wear resistant Coating, High Speed Milling, for Gray, Spheroidal Graphite, Temper & Alloyed Cast Iron, Dry Cutting Coated Thick PVD,Hard, Tough, Wear & Impact Resistant Substrate, Universal Milling, for Cast Iron Materials & Hardened Steel of 54 HRC, Medium Cutting Speed in stable Milling conditions. Dry Cutting Aluminum High Temp DNU10GM HC-N10 C2 DNP10HM HC-N10 C2 DNC15UM HC-N15 C6 Uncoated, Hard & Wear Resistant Uncoated Micrograin Substrate, General Milling, for Aluminum, non errous Metals and Plastics, Medium to High Cutting Speed in stable Milling conditions. Dry/Wet Cutting Coated Ultra-Thin PVD. High Performance Milling, for Aluminum, non errous Material. or inishing Stainless Steel and Cast Iron, High Cutting Speed in stable Milling conditions. Dry/Wet Cutting Coated TiBN CVD, Hard & Wear Resistant Micrograin Substrate, Universal Milling, for Aluminum, non errous Material, High Cutting Speed in stable Milling conditions. Dry/Wet Cutting 99 Call: Visit: sales@doriantool.com

101 Material Application Grade Annealed Alloy Steel Heat Treated Alloy Steel Tool Steel Hardened Steel Milling Cutting Speed SM (V c ) Annealed Austenitic Stainless Steel Hardened Austenitic Stainless Steel Gray Cast Iron Alloy Cast or all Cast Iron Materials Aluminum, Non errous Materials, Plastics Aluminum, Non errous Materials, Plastics SM V c SM V c SM V c SM V c SM V c SM V c SM V c SM V c SM V c SM V c SM V c SM V c Tool Steel Hardened Steel DPC20HM DPP25GM Carbon Steel Alloy Steel DPC30UM DPP35RM DPP40SM Stainless Steel DMP35UM DMP40RM DKC15HM Cast Iron DKP20UM DNU10GM Aluminum High Temp Alloy DNP10HM DNC15UM Call: Visit: sales@doriantool.com 100

102 Technical Specification Material Application P M K N Geometry Specification Number of Cutting Edges l d s d 1 r DPC20HM DPP25GM DPC30UM DPP35RM DPP40SM DMP35UM DMP40RM DKC15HM DKP20UM DNU10GM DNP10HM DNC15UM APHT PDR-NU ,7 3,5 2,8 0, APHT PDR-NU ,52 5,26 4,5 0, d d1 r l s APKT PDSR-PM ,7 3,5 2,8 0, APKT PDSR-MM ,7 3,5 2,8 0, APKT PDSR-PR ,7 3,5 2,8 0, APKT PDSR-KR ,7 3,5 2,8 0, d r 11 d1 APKT PDSR-PM ,52 5,26 4,5 0, APKT PDSR-MM ,52 5,26 4,5 0, APKT PDSR-PR ,52 5,26 4,5 0, l s APKT PDSR-KR ,52 5,26 4,5 0, APKT PDSR-PU ,52 5,26 4,5 1, APKT PDSR-PU ,52 5,26 4,5 2, APKT PDSR-PU ,52 5,26 4,5 3, r 11 d d1 l s OER SN-PU ,1 4,76-0, r 25 OEX 05T305 SN-PU ,7 3,97 4,6 0, r 25 d d1 d l s l s RDHT 12T3 MOEN-MM ,97 4, d d1 s 101 Call: Visit: sales@doriantool.com

103 Technical Specification Material Application P M K N Geometry Specification Number of Cutting Edges l d s d 1 r DPC20HM DPP25GM DPC30UM DPP35RM d d1 DPP40SM DMP35UM l s 15 d DMP40RM d1 DKC15HM DKP20UM DNU10GM DNP10HM DNC15UM RDKW 1003 MOSN-PU ,18 3, RDKW 1003 MOSN-KU ,18 3, RDKW 12T3 MOSN-PU ,97 3, RDKW 12T3 MOSN-KU ,97 3, d d1 RDKW 1604 MOSN-PU ,76 5, RDKW 1604 MOSN-KU ,76 5, s REMW 1304MOSN-PM ,2 4,76 4, REMW 1304MOSN-MM ,2 4,76 4, REMW 1304MOSN-KM ,2 4,76 4, SDHT-1204 AEN-NU 4 12,70 12,70 4,76 5, SDHT-1504 AEN-NU 4 15,88 15,88 4,76 5, SDHT 1204 AESN-PU 4 12,70 12,70 4,76 5, SDHT 1204 AESN-MU 4 12,70 12,70 4,76 5, SDHT 1204 AESN-KU 4 12,70 12,70 4,76 5, SDHT 1504 AESN-PU 4 15,88 15,88 4,76 5, l s SDMT SN-PU 4 9,52 9,52 3,18 4 0, SDMT SN-PU 4 12,70 12,70 4,76 5,5 0, SDMT 1205 PDSR-PU 4 12,70 12,70 5,56 5, d d1 d d1 s r l s SEHT-1204 AEN-NU 4 12,70 12,70 4,76 5, d d1 l s Call: Visit: sales@doriantool.com 102

104 Technical Specification Material Application P M K N Geometry Specification Number of Cutting Edges l d s d 1 r DPC20HM DPP25GM DPC30UM DPP35RM DPP40SM DMP35UM DMP40RM DKC15HM DKP20UM DNU10GM DNP10HM DNC15UM SEKN 1203 ASN-PM 4 12,70 12,70 3, SEKN 1203 AEN-MM 4 12,70 12,70 3, SEKN 1203 ASN-KM 4 12,70 12,70 3, d 20 SEKN 1504 ASN-PM 4 15,88 15,88 4, SEKN 1504 AEN-MM 4 15,88 15,88 4, SEKN 1504 ASN-KM 4 15,88 15,88 4, l s SEKR 1203 ASN-PM 4 12,70 12,70 3, SEKR 1203 AEN-MM 4 12,70 12,70 3, d l s SEKT 1204 ASN-PM 4 12,70 12,70 4,76 5, SEKT 1204 AEN-MM 4 12,70 12,70 4,76 5, d d1 l s SEKW 1204 ASN-PM 4 12,70 12,70 4,76 5, SEKW 1204 AEN-MM 4 12,70 12,70 4,76 5, SEKW 1204 ASN-KM 4 12,70 12,70 4,76 5, SNMX 1206 ANSN-PM 8 12,70 12,70 6,35 5, SNMX 1206 ANSN-MM 8 12,70 12,70 6,35 5, SNMX 1206 ANSN-KM 8 12,70 12,70 6,35 5, SNEX 1206 ANN-M 8 12,70 12,70 6,35 5, d d1 l s SNMX SN-PM 8 12,70 12,70 6,35 5,2 0, SNMX SN-MM 8 12,70 12,70 6,35 5,2 0, SNMX SN-KM 8 12,70 12,70 6,35 5,2 0, SNMX SN-PM 8 12,70 12,70 6,35 5,2 1, SNMX SN-KM 8 12,70 12,70 6,35 5,2 1, d d1 d d1 l s r l s 103 Call: Visit: sales@doriantool.com

105 Technical Specification Material Application P M K N Geometry Specification Number of Cutting Edges l d s d 1 r DPC20HM DPP25GM DPC30UM DPP35RM DPP40SM DMP35UM DMP40RM DKC15HM DKP20UM DNU10GM DNP10HM DNC15UM SPKN 1203 EDSR-PM 4 12,70 12,70 3, SPKN 1203 EDSR-KM 4 12,70 12,70 3, SPKN 1504 EDSR-PM 4 15,88 15,88 4, SPKN 1504 EDSR-KM 4 15,88 15,88 4, d l s SPKR 1203 EDSR-PM 4 12,70 12,70 9, d l s SPMT EN-PU 4 6,35 6,35 3,18 3,4 0, r 11 d d1 l s TNH 1204 ANSN-KM ,70 4, d l s TPKN 1603 PDSR-PM ,52 3, TPKN 1603 PDSR-KM ,52 3, d 11 TPKN 2204 PDSR-PM ,70 4, TPKN 2204 PDSR-KM ,70 4, l s Call: Visit: sales@doriantool.com 104

106 Radius DK25M DASK25B DASP35B TDEX 60º TDEX EN 0,101mm TDEX EN 0,203mm TDEX EN 0,381mm TDEX EN 0,812mm TDEX EN 0,381mm TDEX EN 0,812mm TDEX EN 0,381mm DK25M / DNU25GT Uncoated, hard and wear resistant C2 Substrate for Aluminum & Non errous materials. DASK25B C2 Substrate with PVD TiN-TiAlN-TiN multi-layer coating. or general purpose milling of non-ferrous metals such as aluminum, copper, brass, and bronze, high temp alloys, 300-series stainless steels and cast iron with medium to high SM. TDEX EN 0,812mm TDEX 45º TDEX EN 0,203mm TDEX EN 0,381mm TDEX-17T304-EN 0,381mm TDEX-17T308-EN 0,812mm TDEX EN 0,381mm TDEX EN 0,812mm TEHW TEHW-0602-AEEN 0,101mm DASP35B C5 Substrate with PVD TiN-TiAlN-TiN multi-layer coating. or general purpose milling of carbon steels, alloy steels and tool steels in annealed state with medium to high SM. DUP25GT C2 Substrate with PVD TiN-TiAlN coating. or general purpose milling of carbon steels, alloy steels, stainless steels, high temp alloys, hardened metals and non ferrous materials with medium to high SM. DNP25GT SDHW C2 Substrate with PVD TiN coating. or general purpose milling of high temp alloys, hardened metals and non ferrous materials with medium SM. SDHW EN 0,812mm DNU10GT SDGX-UEN 3/8" Square Convex Radius Radius DNU25GT DUP25GT SDGX-UEN 3/4 Square Convex Radius SDGX-09C01-E 0,406mm SDGX-09C03-E 1,193mm SDGX-09C04-E 1,574mm SDGX-19C05-E 1,981mm SDGX-19C06-E 2,387mm SDGX-19C07-E 2,768mm SDGX-19C08-E 3,175mm SDGX-19C09-E 3,581mm SDGX-19C10-E 3,962mm SDGX-19C11-E 4,521mm SDGX-19C12-E 4,775mm SDGX-19C13-E 5,156mm SDGX-19C14-E 5,562mm SDGX-19C15-E* 5,943mm SDGX-19C16-E* 6,35mm *All SDGX inserts have 4 cutting edges, except 5,943mm & 6,35mm radius inserts that have 2 cutting edges. or general turning applications at a high SM (V c ). Hard, abrasive and wear resistant micro-grained uncoated substrate, for a hard and sharp cutting edge (not for interrupted cuts). Best for Aluminum, Super Alloys, Plastic and all Non errous metals and materials. DNX10UT or universal turning at a very high SM (V c ). Hard, abrasive and high resistant substrate with a microplus plasma TiAlN coating to improve cutting edge hardness, wear and heat resistant, and better chip flow. Best for Aluminum, Plastic, Super Alloys and low Silicone Aerospace Aluminum. VPGT-NU 35º Triangle Universal ISO Grade Grade DNU10GT DNX10UT VPGT NU VPGT NU WCGT-NU 80º Trigon Universal WCGT-06T308-NU Call: Visit: sales@doriantool.com

107 Rigidity, Repeatability & QUALITY SUPER QUICK CHANGE TOOL POST Call: Visit:

108 Style eatures Application SUPER Quick Change Tool Post Triple Action Locking System Zero Backlash Precise Repeatability within Locking le Position Adjustment Super Heavy Duty Locking Gear and Wedge Style Sliding Gibs Industry Standard Interchangeable Tool holders High Tensile Strength Chromium- Molybdenum Alloy Steel Body, Locking Gear, Sliding Gibs, Locking Gear Head, and Locking le Through-Hardened, Ion Nitrided, and Nickel-plated Body Through-Hardened and Ion Nitrided and Precision Ground Locking Gear and Sliding Gibs for Wear Resistance and Repeatability CNC Precision Ground and Qualified for accuracy and super precise repeatability CNC Toolroom Lathes Manual Toolroom Lathes Engine Lathes Heavy Duty Oil-Country Lathes Super Precision High Speed Tight Tolerances and Excellent inish Requiring Applications Deep Drilling and Boring Heavy Duty Material Removal Multi Turning, Drilling, Boring, Threading Applications No. D1 Turning & acing Holder Quick Change Mounting High Tensile Strength Chromium-Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within.0001 Holds Square Shank Tools Turning and acing Threading and Grooving Cut-Off Applications No. D2 Turning, acing & Boring Holder Boring Bar V Seat Quick Change Mounting High Tensile Strength Chromium-Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within.0001 Holds Square Shank Tools Holds Boring Bars Turning and acing Light to Medium Boring Threading and Grooving Cut-Off Applications No. D4-D41-DQ41S DUAL Heavy Duty Boring Bar Holder Precision Ground and Honed Bore Qualified Bore for Precise Tool Alignment and Squareness Quick-Lock System Aligns Boring Bar Center height and Rake Angle Automatically. our Special lat Machined Locking Screws for High Rigidity Extended Overhangs without Scarring the Boring Bar Systems Up to 3 Capacity Quick Change Mounting High Tensile Strength Chromium- Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within.0001 Precision Boring Applications Heavy Duty Boring Applications Heavy Duty Drilling Applications Deep Boring, Drilling and Threading Applications 107 Call: Visit: sales@doriantool.com

109 Style eatures Application No. D5 Morse Taper Holder Precision Ground Morse Taper Qualified for Precise Tool Alignment and Squareness Designed for Deep Drilling Heavy Duty Drilling Quick Change Mounting High Tensile Strength Chromium-Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within.0001 Deep Drilling Applications Heavy Duty Drilling Applications Reaming and Tapping No. D7-71C Reversible Cut-Off Blade Holder Precision Ground Blade Dovetail Seat Qualified for Precise Tool Alignment and Squareness Quick Change Mounting High Tensile Strength Chromium- Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within.0001 Cut-Off Applications Grooving Applications No. D35 Dovetail Drill Chuck Holder Supplied with a Rohm Chuck Qualified for Precise Tool Alignment and Squareness Designed for Versatility Quick Change Mounting High Tensile Strength Chromium- Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within.0001 Center Drilling Precision Drilling Precision Reaming Tapping Note: Quick Change Tool Holders will fit on the Quadra Tool Post of the same size. Only 2 Quick Change Holders at time will fit on the Quadra Index Tool Post. Call: Visit: sales@doriantool.com 108

110 No. D1 Turning & acing Tool holder This tool holder is best used for holding square shank tool holders close to the tool post to maximize rigidity when turning, facing, and threading. its industry standard tool posts. T A T C D E G D25AXA D30BXA D35CXA D40CA D50DA D60EA No. D2 Turning, acing & Boring Tool holder The V groove makes this holder more versatile so that it can hold either square shank tool holders or boring bars. Holds the tool close to the tool post to maximize rigidity when turning, facing, threading or boring. its industry standard tool posts. T A T C D E G G1 D25AXA D30BXA D35CXA D40CA D50DA D60EA Call: Visit: sales@doriantool.com

111 Dual Boring Bar Quick Change Holder with the Double Locking System NEW or Precise Set-up and Maximum Rigidity Boring Bar Center Line Set-up Set Screw Locking System 360 Collar Locking System Maximum Locking force No Boring Bar Damage Quick Release or boring Bars with flats Use this screw to position and lock center line Quick Lock Boring Bar Center Line Set-up Boring Bar with lat Boring Bar 360 Collar Locking System 360 Collar Locking System Boring Bar Releasing Screw or Boring Bar with no flats do not use this screw to position or lock. Boring Bar without lat 360 Collar Locking System Call: Visit:

112 No. D4-DUAL Heavy Duty Boring Bar Tool holder This holder is best used for holding boring bars. It has four flat-face locking-screws that automatically align the center height and rake angle of the boring bar while locking it rigidly for chatter-free machining. lat-face locking-screws do not scar the boring bar. This holder reduces setup time by eliminating the need to indicate across the boring bar flat. its industry standard tool posts. B A Boring Bar Capacity B C D E G D25AXA-4M-20-DUAL D30BXA-4M-25-DUAL D35CXA-4M-25-DUAL D40CA-4M-32-DUAL D50DA-4M-40-DUAL D60EA-4M-50-DUAL No. D41-DUAL Universal Extra Heavy Duty Boring Bar Tool holder B A Boring Bar Capacity B C D E G D25AXA-41M-25-DUAL D30BXA-41M-32-DUAL D35CXA-41M-32-DUAL D40CA-41M-40-DUAL D50DA-41M-50-DUAL D60EA-41M-60-DUAL No. DQ41S-DUAL Super Universal Over Sized Boring Bar Tool holder B A Boring Bar Capacity B C D E G DQ35CXA-41SM-40-DUAL DQ40CA-41SM-50-DUAL DQ50DA-41SM-60-DUAL DQ60EA-41SM-80-DUAL Call: Visit: sales@doriantool.com

113 No. D5 Morse Taper Tool holder This holder is best used for holding morse taper tools. It can be used for drilling, boring, or reaming operations. its industry standard tool posts. M.T. A Morse Taper C D E G D35CXA MT D40CA MT D50DA MT D60EA MT No. D7-71C Extra Heavy Duty Cut-Off Blade Tool holder This holder is best used for holding cut-off blades. It has a taper locking system for maximum rigidity and performance in cut-off and face grooving operations. its industry standard tool posts. C T D A Slot Grip Blade T C D E G D25AXA-7-71C SGIH D30BXA-7-71C D35CXA-7-71C SGIH D40CA-7-71C to D50DA-7-71C SGIH D60EA-7-71C to No. D35 Drill Chuck Tool holder This holder is best used for holding drills, reamers, taps, etc., without tailstock mounting. It uses a drill chuck mounted directly to a quick change holder. This holder is supplied with a drill-chuck. its industry standard tool posts. T A T Capacity C D E G D25AXA D30BXA D35CXA D40CA Call: Visit: sales@doriantool.com 112

114 Strong Rigid, Quick & PRECISE QUADRA INDEXING QUICK CHANGE Combination O.D. & I.D. Operations O.D. Turning Operations O.D. Chamfering Operations 15º Increments I.D. Turning Operations 113 Call: Visit:

115 CENTER HEIGHT QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N Lathe Swing Over Bed 300,0 320,0 400,0 450,0 500,0 XHD A 63,5 76,2 88,9 101,60 127,0 152,4 B 65,3 81,4 87,9 103,4 132,8 142,6 C 132,3 145,3 162,9 191,1 232,0 250,3 D 12,7 12,7 16,0 19,0 25,40 28,6 E 22,4 28,3 31,6 38,9 48,2 56,1 T-Tool Capacity ,0 Optimim C.H.* 36,1 44,4 46,6 55,9 76,1 87,4 C.H. MIN. 25,3 30,8 36,7 44,6 57,0 69,9 Center Height MAX. 50,0 58,0 56,5 67,2 95,1 104,9 Holding Post M12x1,75 M12x1,75 M16x2,0 M18x2,5 M24x3,0 M27x3,0 *Optimum center height is calculated with the smaller tool size of the tool capacity. NEW LOCKING & INDEXABLE SYSTEM with 24 SUPER PRECISE POSITIONING BALL BEARINGS & 2 PRE-LOADED INDEXING PINS Tool Post Indexing Indexing lexibility every Locking Positions Multi-position of the locking handle Instant Tool Repositioning rom Prototypes to High Production Quick Change Tool Holders 4 Tool Holders Locked Simultaneously 1 to 4 Tool Holders ready to be used Positive Lock with absolute zero backlash Tool holder repeatability within mm Indexing repeatability within mm Tool Post Application 6 sizes of Tool Post available rom tool room to oil country lathes Quick and versatile for finishing Strong for heavy-duty roughing Easy to install Maintenance free Call: Visit: sales@doriantool.com 114

116 Style eatures Application QITPN Quadra Indexing Quick Change Tool Post Heavy duty construction Heat-treated alloy steel body Precision ground our quick change tool holders locked independently Industry Standard holders Positive lock with absolute zero backlash One to four tools ready to be used Precise tool repeatability of 0,00127 mm Cam-Lock tool holder locking system for maximum rigidity Instant tool positioning Highest locking rigidity in the industry Indexing flexibility every positive positions Multi-position of the locking handle Wide range of holders Maintenance-free T -nut for easy mounting Ready to install CNC Toolroom Lathes Manual Toolroom Lathes Engine Lathes Heavy Duty Oil-Country Lathes Super Precision High Speed Tight Tolerances and Excellent inish Requiring Applications Deep Drilling and Boring Heavy Material Removal Multi Turning, Drilling, Boring, Threading Applications No. QITPN-1 Turning & acing Holder Quick Change Mounting High Tensile Strength Chromium-Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within 0,00254mm Holds Square Shank Tools Turning and acing Threading and Grooving Cut-Off Applications No. QITPN-2 Turning, acing & Boring Holder Boring Bar V Seat Quick Change Mounting High Tensile Strength Chromium-Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within 0,00254mm Holds Square Shank Tools Holds Boring Bars Turning and acing Light to Medium Boring Threading and Grooving Cut-Off Applications No. D4-D41-DQ41S DUAL Heavy Duty Boring Bar Holder Precision Ground and Honed Bore Qualified Bore for Precise Tool Alignment and Squareness Quick-Lock System Aligns Boring Bar Center height and Rake Angle Automatically. our Special lat Machined Locking Screws for High Rigidity Extended Overhangs without Scarring the Boring Bar Systems Up to 76,2mm Capacity Quick Change Mounting High Tensile Strength Chromium- Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within 0,00254mm Precision Boring Applications Heavy Duty Boring Applications Heavy Duty Drilling Applications Deep Boring, Drilling and Threading Applications 115 Call: Visit: sales@doriantool.com

117 Style eatures Application No. QITPN-5 Morse Taper Holder Precision Ground Morse Taper Qualified for Precise Tool Alignment and Squareness Designed for Deep Drilling Heavy Duty Drilling Quick Change Mounting High Tensile Strength Chromium-Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within 0,00254mm Deep Drilling Applications Heavy Duty Drilling Applications Reaming and Tapping No. QITPN-7-71C Reversible Cut-Off Blade Holder Qualified for Precise Tool Alignment and Squareness Quick Change Mounting High Tensile Strength Chromium- Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within 0,00254mm Cut-Off Applications Grooving Applications No. QITPN-36 5C Collet Holder 5C Collet Holding System Supplied with Collet Closer Qualified for Precise Tool Alignment and Squareness Designed for Versatility Quick Change Mounting High Tensile Strength Chromium- Molybdenum Alloy Steel Hardened & Black inished CNC Precision Ground and Qualified for Accuracy and Super Precise Tool Change Repeatability within 0,00254mm Miniature to Medium System Tools or Special Tool System and Shapes Accepts Square, Round & Hex Collets Drilling Applications Boring Applications Reaming Applications Tapping rom 1,5875tmm to 25,4mm Diameter Tools Note: The Quadra Tool Holder will fit on the Quick Change Tool Post of the same size Call: Visit:

118 No. QITPN-1 Turning & acing Tool holder This tool holder is best used for holding square shank tool holders close to the tool post to maximize rigidity when turning, facing, and threading. its industry standard tool posts. 1 T 4 3 A T C D E G QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N No. QITPN-2 Turning, acing & Boring Tool holder The V groove makes this holder more versatile so that it can hold either square shank tool holders or boring bars. Holds the tool close to the tool post to maximize rigidity when turning, facing, threading or boring. its industry standard tool posts. 1 1 T UPC No A T C D E G G1 QITP25N QITP30N QITP35N QITP40N QITP50N QITP60N Call: Visit: sales@doriantool.com

119 2 2 2 No. QITPN-4M-DUAL Heavy Duty Boring Bar Tool holder This holder is best used for holding boring bars. It has four flat-face locking-screws that automatically align the center height and rake angle of the boring bar while locking it rigidly for chatter-free machining. lat-face locking-screws do not scar the boring bar. This holder reduces setup time by eliminating the need to indicate across the boring bar flat. its industry standard tool posts. 1 CH E A B 4 3 A Boring Bar Capacity B C D E G QITP25N-4M-20-DUAL QITP30N-4M-25-DUAL QITP35N-4M-25-DUAL QITP40N-4M-32-DUAL QITP50N-4M-40-DUAL QITP60N-4M-50-DUAL CH E A B 4 3 No. QITPN-41M-DUALUniversal Extra Heavy Duty Boring Bar Tool holder A Boring Bar Capacity B C D E G QITP35N-41M-32-DUAL QITP40N-41M-40-DUAL QITP50N-41M-50-DUAL QITP60N-41M-60-DUAL C E A CH B G 4 1 D 3 No. DQ-41S-DUAL Universal Super Over Sized Boring Bar Tool holder A Boring Bar Capacity B C D E G DQ35CXA-41SM-40-DUAL DQ40CA-41SM-50-DUAL DQ50DA-41SM-60-DUAL DQ60EA-41SM-80-DUAL Call: Visit: sales@doriantool.com 118

120 2 2 2 No. QITPN-5 Morse Taper Tool holder This holder is best used for holding morse taper tools. It can be used for drilling, boring, or reaming operations. its industry standard tool posts. M.T A Morse Taper C D E G QITP35N MT QITP40N MT QITP50N MT QITP60N MT No. QITPN-7-71C Extra Heavy Duty Cut-Off Blade Tool holder This holder is best used for holding cut-off blades. It has a taper locking system for maximum rigidity and performance in cut-off and face grooving operations. its industry standard tool posts. 1 T C D 4 3 A Slot Grip Blade T C D E G QITP25N-7-71C SGIH QITP30N-7-71C QITP35N-7-71C SGIH QITP40N-7-71C to QITP50N-7-71C SGIH QITP60N-7-71C to No. QITPN-36 5C Collet Tool holder This holder s wide range of collet adaptability makes this tool ideal for holding drills, taps, chucks, & boring bars. It holds the tools with extreme rigidity without scarring them. its industry standard tool posts A C D E G QITP25N QITP30N QITP35N QITP40N Call: Visit: sales@doriantool.com

121 INDEX Call: Visit:

122 s s s s s Page Page Page Page Page CCDGW-S4T001-KEU 8 CNMG UEM 10 DNGG SE 13 SDGX-09T3C16-E 8 TNMG MEM 12 CCDGW-S4T002-KEU 8 CNMG KER 13 DNGG SE 13 SDGX-1904C05-E 8 TNMG PEM 10 CCGT UEU 6 CNMG ME 12 DNGG SE 13 SDGX-1904C06-E 8 TNMG MEM 12 CCGT NU 9 CNMG MEH 12 DNGG SE 13 SDGX-1904C07-E 8 TNMG PEM 10 CCGT UEU 6 CNMG MEM 12 DNGG SE 13 SDGX-1904C08-E 8 TNMX UEXL 11 CCGT UEXL 7 CNMG MER 12 DNGG SE 13 SDGX-1904C09-E 8 TNMX UEXR 11 CCGT UEXR 7 CNMG PEM 10 DNMA KEU 13 SDGX-1904C10-E 8 TNMX UEXL 11 CCGT NU 9 CNMG PER 10 DNMG KE 13 SDGX-1904C11-E 8 TNMX UEXR 11 CCGT UEU 6 CNMG PEX 11 DNMG ME 12 SDGX-1904C12-E 8 TPG UEN 8 CCGT UEXL 7 CNMG KER 13 DNMG PE 10 SDGX-1904C13-E 8 TPG UEN 8 CCGT UEXR 7 CNMG PEM 10 DNMG UEM 10 SDGX-1904C14-E 8 TPG UEN 8 CCGT-09T302-NU 9 CNMG PER 10 DNMG KE 13 SDGX-1904C15-E 8 TPG UEN 8 CCGT-09T302-UEU 6 CNMG KER 13 DNMG MEM 12 SDGX-1904C16-E 8 TPG UEN 8 CCGT-09T304 UEXL 7 CNMG MEH 12 DNMG PE 10 SNMA KEU 13 TPG UEN 8 CCGT-09T304 UEXR 7 CNMG MER 12 DNMG PEM 10 SNMA KEU 13 TPG UEN 8 CCGT-09T304-NU 9 CNMG PEM 10 DNMG UEM 10 SNMA KEU 13 TPGB UEN 8 CCGT-09T304-UEU 6 CNMG PER 10 DNMG PE 10 SNMA KEU 13 TPGB UEN 8 CCGT-09T308 UEXL 7 CNMG KER 13 DNMG SEM 13 SNMA KEU 13 TPGB UEN 8 CCGT-09T308 UEXR 7 CNMG MEH 12 DNMG KER 13 SNMG PER 10 TPGB UEN 8 CCGT-09T308-NU 9 CNMG PEM 10 DNMG MEM 12 SNMG ME 12 TPGB UEN 8 CCGT NU 9 CNMG PER 10 DNMG PE 10 SNMG UEM 10 TPGB UEN 8 CCGT UEU 6 CNMG MEH 12 DNMG PEM 10 SNMG PE 10 TPGH UEN 8 CCGT UEXL 7 CNMG MER 12 DNMG PER 10 SNMG KER 13 TPGH UEN 8 CCGT UEXR 7 CNMG PEM 10 DNMG SEM 13 SNMG MER 12 TPGH UEN 8 CCGT NU 9 CNMG PER 10 DNMG UEM 10 SNMG PEM 10 TPGH UEN 8 CCGT UEU 6 CNMG MEH 12 DNMG KER 13 SNMG PER 10 TPGH UEN 8 CCGT UEXL 7 CNMG PEM 10 DNMG PEM 10 SNMG KER 13 TPGH UEN 8 CCGT UEXR 7 CNMG PER 10 DNMG PER 10 SNMG MER 12 TPGT UEU 6 CCGW KEU 8 CNMG PER 10 DNMG SEM 13 SNMG PEM 10 TPGT UEU 6 CCGW-09T308-KEU 8 CNMM PST 11 DNMG ME 12 SNMG PER 10 TPGT UEU 6 CCGX UEL 6 CNMM PSH 11 DNMG PE 10 SNMG PEM 10 TPGT-16T302-UEU 6 CCGX UER 6 CNMM PSH 11 DNMG SEM 13 SNMG MEH 12 TPGT-16T304-UEU 6 CCMT PE 7 CNMM PSH 11 DNMG UEM 10 SNMG MEH 12 TPGT-16T308-UEU 6 CCMT PEM 7 CNMM PSH 11 DNMG KER 13 SNMG KER 13 TPGW KEU 8 CCMT PE 7 CNMM PSH 11 DNMG ME 12 SNMG MEH 12 TPGW-16T304-KEU 8 CCMT PEM 7 CNMM PSH 11 DNMG MEH 12 SNMG MER 12 TPGW-16T308-KEU 8 CCMT PE 7 CNMM PSS 11 DNMG MEM 12 SNMG PEM 10 TPHT-16T304-UEN 8 CCMT PEM 7 CNMM PSH 11 DNMG MER 12 SNMG KER 13 TPHT-16T308-UEN 8 CCMT-093T04-SEH 8 CNMM PST 11 DNMG PE 10 SNMG MEH 12 TPMR PEU 7 CCMT-09T304-KEM 9 CNMX UEXL 11 DNMG PEM 10 SNMG PER 10 TPMR PEU 7 CCMT-09T304-MEH 9 CNMX UEXR 11 DNMG PER 10 SNMM PSH 11 TPMR PEU 7 CCMT-09T304-MEM 9 CNMX UEXL 11 DNMG SEH 13 SNMM PSH 11 TPMR PEU 7 CCMT-09T304-PE 7 CNMX UEXR 11 DNMG SEM 13 SNMM PSH 11 VBGT UEU 6 CCMT-09T304-PEM 7 CPGT-05T102-UEU 6 DNMG UEM 10 SNMM PSH 11 VBGT UEU 6 CCMT-09T308-KEM 9 CPGT-05T104-UEU 6 DNMG KER 13 SNMM PSH 11 VBGT UEU 6 CCMT-09T308-MEH 9 CPGT UEU 6 DNMG MEH 12 SNMM PSH 11 VBGW KEU 8 CCMT-09T308-MEM 9 CPGW-05T102-KEU 8 DNMG MEM 12 SNMM PSS 11 VBGW KEU 8 CCMT-09T308-PE 7 CPGW-05T104-KEU 8 DNMG MER 12 SNMM PSH 11 VBGW KEU 8 CCMT-09T308-PEM 7 CPGW KEU 8 DNMG PEM 10 SNMM PSS 11 VBGX UEL 6 CCMT MEM 9 CPGW-09T304-KEU 8 DNMG PER 10 SNMM PSH 11 VBGX UER 6 CCMT PE 7 CPGW-09T308-KEU 8 DNMG PEX 11 SNMM PST 11 VBMT PE 7 CCMT PEM 7 DCGT UEU 6 DNMG SEM 13 SNMM PST 11 VBMT PE 7 CCMT KEM 9 DCGT NU 9 DNMG PEM 10 TCGT UEU 6 VBMT PE 7 CCMT MEM 9 DCGT UEU 6 DNMG PER 10 TCGT UEU 6 VCGT UEU 6 CCMT PEM 7 DCGT UEXL 7 DNMX UEXL 11 TCGT UEXL 7 VCGT NU 9 CDGW KEU 8 DCGT UEXR 7 DNMX UEXR 11 TCGT UEXR 7 VCGT NU 9 CDGW KEU 8 DCGT NU 9 DNMX UEXL 11 TCGT NU 9 VCGT UEU 6 CDGX UEL 6 DCGT UEU 6 DNMX UEXR 11 TCGT UEU 6 VCGT NU 9 CDGX UER 6 DCGT-11T301-UEU 6 DNMX UEXL 11 TCGT-16T302-UEU 6 VCGT UEU 6 CDGX UEL 6 DCGT-11T302-NU 9 DNMX UEXR 11 TCGT-16T304 UEXL 7 VCGT NU 9 CDGX UER 6 DCGT-11T302-UEU 6 DNMX UEXL 11 TCGT-16T304 UEXR 7 VCGT UEU 6 CNGG SE 13 DCGT-11T304 UEXL 7 DNMX UEXR 11 TCGT-16T304-NU 9 VCGT NU 9 CNGG SEM 13 DCGT-11T304 UEXR 7 DNMX UEXL 11 TCGT-16T304-UEU 6 VCGT UEU 6 CNGG SE 13 DCGT-11T304-NU 9 DNMX UEXR 11 TCGT-16T308 UEXL 7 VCGT NU 9 CNGG SEM 13 DCGT-11T304-UEU 6 DNMX UEXL 11 TCGT-16T308 UEXR 7 VCGT NU 9 CNGG SER 13 DCGT-11T308 UEXL 7 DNMX UEXR 11 TCGT-16T308-UEU 6 VCGW KEU 8 CNGG SE 13 DCGT-11T308 UEXR 7 RCGT-0602MO-NU 9 TCGW KEU 8 VCGW KEU 8 CNGG SEM 13 DCGT-11T308-NU 9 RCGT-0803MO-NU 9 TCGW-16T308-KEU 8 VCGW KEU 8 CNGG SER 13 DCGT-11T308-UEU 6 RCGT-1003MO-NU 9 TCGX UER 6 VCGX UEL 6 CNMA KEU 13 DCGT UEU 6 RCMT-0602MO-NU 9 TCGX UER 6 VCGX UER 6 CNMA KEU 13 DCGT UEU 6 RCMT UM 7 TCMT-06T102-PE 7 VCMT PE 7 CNMA KEU 13 DCGW KEU 8 RCMT-1606-MO-SEH 8 TCMT MEM 9 VCMT MEM 9 CNMA KEU 13 DCGX UER 6 RCMT UM 7 TCMT PE 7 VCMT PE 7 CNMG ME 12 DCGX UEL 6 RCMT-2006-MO-SEH 8 TCMT PEM 7 VCMT PEM 7 CNMG PEM 10 DCMT KEM 9 RCMT UM 7 TCMT MEM 9 VCMT MEM 9 CNMG KE 13 DCMT PEM 7 RCMX-1003MO-UEX 7 TCMT PEM 7 VCMT PE 7 CNMG ME 12 DCMT KEM 9 RCMX-1204MO-UEX 7 TCMT-16T304-MEM 9 VCMT PEM 7 CNMG PE 10 DCMT-11T04-SEH 8 RCMX-1606MO-UEX 7 TCMT-16T304-PEM 7 VCMT MEM 9 CNMG SEM 13 DCMT-11T304-KEM 9 RCMX-2006MO-UEX 7 TCMT-16T308-MEM 9 VNMG PE 10 CNMG UEM 10 DCMT-11T304-MEH 9 RCMX-2507MO-UEX 7 TCMT-16T308-PEM 7 VNMG SE 13 CNMG KER 13 DCMT-11T304-MEM 9 RCMX-3209MO-UEX 7 TNMA KEU 13 VNMG PE 10 CNMG ME 12 DCMT-11T304-PE 7 SCGT NU 9 TNMA KEU 13 VNMG PEM 10 CNMG MEH 12 DCMT-11T304-PEM 7 SCMT-09T304-PE 7 TNMA KEU 13 VNMG SE 13 CNMG MEM 12 DCMT-11T308-KEM 9 SCMT-09T308-PEM 7 TNMG PE 10 VNMG UEM 10 CNMG PE 10 DCMT-11T308-MEH 9 SCMT KEM 9 TNMG UEM 10 VNMG PEM 10 CNMG PEM 10 DCMT-11T308-MEM 9 SCMT MEM 9 TNMG MEM 12 VPGT NU 9 CNMG PER 10 DCMT-11T308-PEM 7 SCMT PEM 7 TNMG PE 10 VPGT NU 9 CNMG PEX 11 DCMT PE 7 SCMT PEM 7 TNMG PEM 10 VPGT NU 9 CNMG SEH 13 DCMW-11T304-KEU 8 SDGX-09T3-C04-E 8 TNMG UEM 10 WCGT UEU 6 CNMG SEM 13 DCMW-11T308-KEU 8 SDGX-09T3C12-E 8 TNMG PEM 10 WCGT-06T302-NU Call: Visit: sales@doriantool.com

123 s Jet-Stream Jet-Stream Carbide Bars Carbide Bars Page Page Page Page Page WCGT-06T304-NU 9 ADCLNR/L-2020-K12 15 IWSN AE20M-Q-QCCBB 26 E16M-S-SNR/L-H16 23 WCGT-06T304-UEU 6 ADCLNR/L-2525-M12 15 IWSN AE20M-S-QCCBB 26 E16M-S-STUCR/L WCGT-06T308-NU 9 ADCLNR/L-3232-P12 15 JC AE25M-R-QCCBB 26 E16M-S-STUPR/L WCGT-06T308-UEU 6 ADCLNR/L-3232-P16 15 JC AE25M-T-QCCBB 26 E16M-S-SVMCR/L WCGT NU 9 ADCLNR/L-4040-S12 15 JC AE32M-U-QCCBB 26 E16M-S-SVQCR/L WCGT NU 9 ADCLNR/L-4040-S16 15 JD E04M-H-SCLDR/L E16M-S-SVQPR/L WCGT-S30201-UEU 6 ADDJNR/L-2020-K11 15 JS E05M-H-SCLDR/L E16M-S-SVUCR/L WCGT-S30202-UEU 6 ADDJNR/L-2020-K15 15 JS E05M-H-SWLCR/L E16M-S-SVUPR/L WCMT PE 7 ADDJNR/L-2525-M15 15 JSB PE-M E06M-H-SCLDR/L E16M-S-SVXCR/L WNGG SE 13 ADDJNR/L-3232-P15 15 JSBP-M E06M-H-SNR/L E16M-S-SVXPR/L WNGG SEM 13 ADDJNR/L-4040-S15 15 JSBPS-M E06M-H-SWLCR/L E16M-S-SWLCR/L WNGG SE 13 ADDPNN-2020-K11 15 JSCAP E07M-H-SCLDR/L E16M-S-SWLCR/L WNGG SEH 13 ADDPNN-2020-K15 15 JSCS E07M-H-SNR/L E20M-Q-ADLNR/L WNGG SEM 13 ADDPNN-2525-M11 15 JSCS E07M-H-STUCR/L E20M-Q-NER/L-2 23 WNGG SE 13 ADDPNN-2525-M15 15 JSCS-04-HPV 20 E07M-H-SWLCR/L E20M-Q-SCLCR/L WNMA KEU 13 ADDPNN-3232-P15 15 JSCS E08M-K-SCLDR/L E20M-Q-SDUCR/L WNMA KEU 13 ADDPNN-4040-S15 15 JSN-M6 20 E08M-K-SNR/L E20M-Q-SDXCR/L WNMG UEM 10 ADLER/L Q-K 18 JSLC-HP16L-N 20 E08M-K-STUCR/L E20M-Q-STUCR/L WNMG UEM 10 ADLER/L Q-M 18 JSLC-HP16R-N 20 E08M-K-SWLCR/L E20M-Q-SWLCR/L WNMG ME 12 ADLER/L Q-M 18 JSLC-HP22N 20 E10M-M-SCLCR/L E20M-S-ADLNR/L WNMG UEM 10 ADSDNN-2020-M12 15 JSLC-HP27N 20 E10M-M-SCLPR/L E20M-S-NER/L-2 23 WNMG MEM 12 ADSDNN-2525-M12 15 JSLC-HP72 20 E10M-M-SDNCR/L E20M-S-SCLCR/L WNMG PEM 10 ADSDNN-3232-P12 15 JSLC-HP73 20 E10M-M-SDQCR/L E20M-S-SDUCR/L WNMG UEM 10 ADSDNN-3232-P15 15 JSLC-HP76 20 E10M-M-SDUCR/L E20M-S-SDXCR/L WNMG ME 12 ADSDNN-4040-S15 15 JSLC-HP77 20 E10M-M-SDXCR/L E20M-S-STUCR/L WNMG SEM 13 ADSRNR/L-2020-K12 15 JSLC-HPC3-B 20 E10M-M-SNR/L-H11 23 E20M-S-SWLCR/L WNMG UEM 10 ADSRNR/L-2525-M12 15 JSLC-HPC5 20 E10M-M-STUCR/L E25M-R-ADCLNR/L WNMG KER 13 ADSRNR/L-3232-P15 15 JSLC-HPC6 20 E10M-M-STUCR/L E25M-R-ADDPNR/L WNMG ME 12 ADSRNR/L-4040-S15 15 JSLC-HPCTW-4N 20 E10M-M-STUPR/L E25M-R-ADDUNR/L WNMG MEM 12 ADTENN-2020-K16 16 JSLC-HPCTW-4N-HPV 20 E10M-M-SWLCR/L E25M-R-ADLNR/L WNMG MER 12 ADTENN-2020-K22 16 JSLC-HPD3 20 E12M-K-NER/L-2 23 E25M-R-ADNER/L-3 24 WNMG PEM 10 ADTENN-2525-M16 16 JSLC-HPD4 20 E12M-K-SCLCR/L E25M-R-ADTUNR/L WNMG PER 10 ADTENN-2525-M22 16 JSLC-HPDT3-BL 20 E12M-K-SCLCR/L E25M-R-ADWLNR/L WNMG SEM 13 ADTENN-3232-P22 16 JSLC-HPDT3-BR 20 E12M-K-SCLPR/L E25M-R-SCLCR/L WNMG KER 13 ADTENN-4040-S22 16 JSLC-HPTW3L 20 E12M-K-SCLPR/L E25M-R-SDUCR/L WNMG MEH 12 ADTJNR/L-2020-K16 16 JSLC-HPTW3N 20 E12M-K-SDNCR/L E25M-R-SDXCR/L WNMG MEM 12 ADTJNR/L-2020-K22 16 JSLC-HPTW3R 20 E12M-K-SDQCR/L E25M-R-STUCR/L WNMG MER 12 ADTJNR/L-2525-M16 16 JSLC-HPTW4L 20 E12M-K-SDUCR/L E25M-R-SWLCR/L WNMG PEM 10 ADTJNR/L-2525-M22 16 JSLC-HPTW4R 20 E12M-K-SDXCR/L E25M-T-ADCLNR/L WNMG PER 10 ADTJNR/L-3232-P22 16 JSLC-HPV3 20 E12M-K-SNR/L-H11 23 E25M-T-ADDPNR/L WNMG SEM 13 ADTJNR/L-4040-S22 16 JSLC-HPW3-B 20 E12M-K-STUCR/L E25M-T-ADDUNR/L WNMG MEM 12 ADVJNR/L-2020-K16 16 JS-MC E12M-K-STUPR/L E25M-T-ADLNR/L ADVJNR/L-2525-M16 16 JS-MC E12M-K-SVMCR/L E25M-T-ADNER/L-3 24 ADVJNR/L-3232-P16 16 JS-MC E12M-K-SWLCR/L E25M-T-ADTUNR/L ADWLNR/L-2020-K06 16 JSOR E12M-K-SWLCR/L E25M-T-ADWLNR/L ADWLNR/L-2525-M06 16 JSOR E12M-R-NER/L-2 23 E25M-T-SCLCR/L ADWLNR/L-2525-M08 16 JSOR E12M-R-SCLCR/L E25M-T-SDUCR/L ADWLNR/L-3232-P08 16 JSOR E12M-R-SCLCR/L E25M-T-SDXCR/L ADWLNR/L-4040-S08 16 JSOR E12M-R-SCLPR/L E25M-T-STUCR/L ADWLNRL-2020-K08 16 JSOR E12M-R-SCLPR/L E25M-T-SWLCR/L AS-20R-ADCLNR/L JSOR E12M-R-SDNCR/L E32M-U-ADCLNR/L AS-20R-ADLNR/L JSPLPCK E12M-R-SDQCR/L E32M-U-ADDPNR/L AS-20R-ADTUNR/L JSPLPCK E12M-R-SDUCR/L E32M-U-ADDUNR/L AS-20R-ADWLNR/L JSPLPCK E12M-R-SDXCR/L E32M-U-ADLNR/L AS-25R-ADCLNR/L JSPN-M3 20 E12M-R-SNR/L-H11 23 E32M-U-ADLNR/L AS-25R-ADDUNR/L JSPN-M6 20 E12M-R-STUCR/L E32M-U-ADNER/L-3 24 AS-25R-ADLNR/L JS-T E12M-R-STUPR/L E32M-U-ADTUNR/L AS-25R-ADTUNR/L JT E12M-R-SVMCR/L E32M-U-ADVUNR/L AS-25R-ADWLNR/L JT E12M-R-SWLCR/L E32M-U-ADWLNR/L AS-32R-ADVUNR/L JV E12M-R-SWLCR/L E32M-U-SCLCR/L AS-32S-ADCLNR/L NXE/I E16M-M-NER/L-2 23 E32M-U-SDUCR/L AS-32S-ADDPNR/L SL E16M-M-SCLCR/L E32M-U-SDXCR/L AS-32S-ADDUNR/L SM E16M-M-SCLCR/L E32M-U-STUCR/L AS-32S-ADLNR/L SM-M3 20 E16M-M-SCLPR/L E32M-U-SWLCR/L AS-32S-ADLNR/L SM-M3-T 20 E16M-M-SCLPR/L AS-32S-ADSKNR/L SM-M E16M-M-SDNCR/L AS-32S-ADTUNR/L SM-M E16M-M-SDQCR/L AS-32S-ADWLNR/L SM-M E16M-M-SDUCR/L AS-40S-ADCLNR/L SM-M E16M-M-SDXCR/L AS-40S-ADDUNR/L SM-M6 20 E16M-M-SNR/L-H16 23 AS-40S-ADLNR/L SM-M66 20 E16M-M-STUCR/L AS-40S-ADTUNR/L SM-S4 20 E16M-M-STUPR/L AS-40S-ADVUNR/L T E16M-M-SVMCR/L AS-40S-ADWLNR/L T E16M-M-SVQCR/L AS-50T-ADCLNR-L TS M1 20 E16M-M-SVQPR/L AS-50T-ADDUNR/L TS M1 20 E16M-M-SVUCR/L DT-1/4 HP-QRCK 19 TS M1 20 E16M-M-SVUPR/L DT-1/8 HP-QRCK 19 TS M1 20 E16M-M-SVXCR/L DT-HP90C-1/8x6 19 VXE/I E16M-M-SVXPR/L DT-HPOSC-1/4x6 19 E16M-M-SWLCR/L DT-HP-PLIERS 19 E16M-M-SWLCR/L DT-HPTU-8X4 19 E16M-S-NER/L-2 23 GTS-1M 20 E16M-S-SCLCR/L GTS-2 20 E16M-S-SCLCR/L GTS-3 20 E16M-S-SCLPR/L GXE/I E16M-S-SCLPR/L IDSN E16M-S-SDNCR/L IDSN E16M-S-SDQCR/L ISSN E16M-S-SDUCR/L IWSN E16M-S-SDXCR/L Call: Visit: sales@doriantool.com 122

124 Solution Tool Solution Tool Kool Cut Kool Cut Page Page Page Page ASM100X-10-DVI-MBBB-1400-SB 36 DVM16X-10-STUCR/L-11-CB 32 A20M-R-4-MBQC 61 AE25M-T-6-MBQC 61 ASM100X-12-DVI-MBBB-1600-SB 36 DVM16X-12-SCLCR/L-09-CB 32 A25M-R-4-MBQC 61 AE32M-U-6-MBQC 61 ASM100X-14-DVI-MBBB-1800-CB 36 DVM16X-12-SDNCR-07-CB 32 A32M-S-4-MBQC 61 DNPG SR-N DPP40SG 51 ASM100X-8-DVI-MBBB-1200-SB 36 DVM16X-12-SDUCR/L-07-CB 32 ADCDN-L DNPG SR-N DPP40SG 51 ASM40X-10-DVI-MBBB-0560-SB 36 DVM16X-12-SDXCR-07-CB 32 ADCDN-L DNPG SR-N DPP40SG 51 ASM40X-12-DVI-MBBB-0640-SB 36 DVM16X-12-STUCR/L-11-CB 32 ADCDN-L DNPG SR-N DPP40SG 51 ASM40X-14-DVI-MBBB-0720-CB 36 DVM16X-14-SCLCR/L-09-CB 32 ADCDN-L DNPG SR-N DPP40SG 51 ASM40X-8-DVI-MBBB-0480-SB 36 DVM16X-14-SDNCR/L-07-CB 32 ADCDN-L DNTQ EU-N DUP25UG 51 ASM50X-10-DVI-MBBB-0700-SB 36 DVM16X-14-SDUCR/L-07-CB 32 ADCDN-L DNTQ EU-N DUP25UG 51 ASM50X-12-DVI-MBBB-0800-SB 36 DVM16X-14-SDXCR-07-CB 32 ADCDN-L DNTQ EU-N DUP25UG 51 ASM50X-14-DVI-MBBB-0900-CB 36 DVM16X-14-STUCR/L-11-CB 32 ADCDN-L DNTQ EU-N DUP25UG 51 ASM50X-8-DVI-MBBB-0600-SB 36 DVM20X-08-MQBBN-0240-CB 33 ADCDN-L DNTQ EU-N DUP25UG 51 ASM60X-10-DVI-MBBB-0840-SB 36 DVM20X-08-MQBBN-0240-SB 33 ADCDN-L DNTR EU-N DUP25UG 51 ASM60X-12-DVI-MBBB-0960-SB 36 DVM20X-10-MQBBN-0280-CB 33 ADCDN-L DNTR EU-N DUP25UG 51 ASM60X-14-DVI-MBBB-1080-CB 36 DVM20X-10-MQBBN-0280-SB 33 ADCDN-L DNTR EU-N DUP25UG 51 ASM60X-8-DVI-MBBB-0720-SB 36 DVM20X-12-MQBBN-0320-CB 33 ADCDN-L DQCMH-ITR/L ASM80X-10-DVI-MBBB-1120-SB 36 DVM20X-12-MQBBN-0320-SB 33 ADCDN-L DQCMH-ITR/L ASM80X-12-DVI-MBBB-1280-SB 36 DVM20X-14-MQBBN-0360-CB 33 ADCDN-L > DQCMH-ITR/L ASM80X-14-DVI-MBBB-1440-CB 36 DVM25X-08-MQBBN-0300-CB 33 ADCDN-L > DQCMH-ITR/L ASM80X-8-DVI-MBBB-0960-SB 36 DVM25X-08-MQBBN-0300-SB 33 ADCDN-L > DQCMH-ITR/L DBOMH-12/20M-SCLCR/L-3 34 DVM25X-10-MQBBN-0350-CB 33 ADCDN-L DQCMH-ITR/L DBOMH-12/20M-SCLPR-3 34 DVM25X-10-MQBBN-0350-SB 33 ADCDN-L DQCMH-ITR/L DBOMH-12/20M-SDNCR/L-3 34 DVM25X-12-MQBBN-0400-CB 33 ADCDN-L DQCMH-ITR/L DBOMH-12/20M-SDQCR/L-2 34 DVM25X-12-MQBBN-0400-SB 33 ADCDN-L DQCMH-ITR/L DBOMH-12/20M-SDQCR/L-3 34 DVM25X-14-MQBBN-0450-CB 33 ADCDN-L DQCMH-IUR/L DBOMH-12/20M-SDUCR/L-2 34 DVM32X-08-MQBBN-0384-CB 33 ADCDN-L DQCMH-IUR/L DBOMH-12/20M-SDUCR/L-3 34 DVM32X-08-MQBBN-0384-SB 33 ADCDN-L DQCMH-IUR/L DBOMH-12/20M-SDXCR/L-3 34 DVM32X-10-MQBBN-0448-CB 33 ADCDN-L DQCNH-IR/L DBOMH-12/20M-SNR/L DVM32X-10-MQBBN-0448-SB 33 ADCDN-L DQCNH-IR/L DBOMH-12/20M-STUCR/L-2 35 DVM32X-12-MQBBN-0512-CB 33 ADCDN-L DQCNH-IR/L DBOMH-12/20M-STUCR/L-3 35 DVM32X-12-MQBBN-0512-SB 33 ADCDN-L60-500> DQCNH-IR/L DBOMH-12/20M-SVUCR/L-2 35 DVM32X-14-MQBBN-0576-CB 33 ADCDN-L60-500> SGTL DBOMH-12/20M-SWLCR/L-3 35 STM100X-06-MTB900-SB 31 ADCDN-L60-500> SGTL DBOMH-24/40M-ADCLNR/L-4 37 STM12X-06-ITBNL-11-CB 31 ADDN-MGL-2020-C 42 SGTL DBOMH-24/40M-ADCLNR/L-5 37 STM16X-06-ITBNL-16-CB 31 ADDN-MGL-2525-D 42 SGTL DBOMH-24/40M-ADDNNR STM20X-06-QTB120-SB 31 ADDN-MGL-3232-E 42 SGTL DBOMH-24/40M-ADDNNR STM25X-06-QTB150-SB 31 ADDN-MGR-2020-C 42 SGTL DBOMH-24/40M-ADDNNR STM32X-06-QTB200-SB 31 ADDN-MGR-2525-D 42 SGTL DBOMH-24/40M-ADDQNR/L STM40X-06-MTB360-SB 31 ADDN-MGR-3232-E 42 SGTL DBOMH-24/40M-ADDUNR/L STM50X-06-MTB450-SB 31 ADDN-MTL-2020-C 41 SGTL DBOMH-24/40M-ADDXNR STM60X-06-MTB540-SB 31 ADDN-MTL-2525-D 41 SGTN-2 54 DBOMH-24/40M-ADDXNR STM80X-06-MTB720-SB 31 ADDN-MTL-3232-E 41 SGTN DBOMH-24/40M-ADDXNR ADDN-MTR-2020-C 41 SGTN-3 54 DBOMH-24/40M-ADLNR/L ADDN-MTR-2525-D 41 SGTN-4 54 DBOMH-24/40M-ADLNR/L ADDN-MTR-3232-E 41 SGTN DBOMH-24/40M-ADLNR/L ADKDN-TL SGTN-5 54 DBOMH-24/40M-ADNER/L-3 39 ADKDN-TL SGTN-6 54 DBOMH-24/40M-ADSQCR/L-4 38 ADKDN-TL SGTN-8 54 DBOMH-24/40M-ADTHOR/L-4 39 ADKDN-TL SGTN-9 54 DBOMH-24/40M-ADTUNR/L-3 37 ADKDN-TL SGTR DBOMH-24/40M-ADTUNR/L-4 37 ADKDN-TL SGTR DBOMH-24/40M-ADVUNR/L-3 38 ADKDN-TL SGTR DBOMH-24/40M-ADWLNR/L-4 38 ADKDN-TL SGTR DBOMH-24/40M-ASCLCR/L-4 38 ADKDN-TL SGTR DBOMH-24/40M-ASDQCR/L-3 38 ADKDN-TL SGTR DBOMH-24/40M-ASDUCR/L-3 38 ADKDN-TL SGTR DBOMH-24/40M-ASDUCR/L-4 38 ADKDN-TL SGTR DBOMH-24/40M-ASDXCR/L-3 38 ADKDN-TL SGTR DBOMH-24/40M-ASTUCR/L-3 39 ADKDN-TL TWECOB-DNT DBOMH-24/40M-ASTUCR/L-4 39 ADKDN-TL TWECOB-DNT DBOMH-24/40M-ASVUCR/L-3 39 ADKDN-TL TWECOB-DNT DVM12X-08-SCLCR/L-06-CB 32 ADKDN-TL TWECOB-DNT DVM12X-08-SDNCR-07-CB 32 ADKDN-TL TWECOB-DNT DVM12X-08-SDUCR/L-07-CB 32 ADKDN-TR TWECOB-DNT DVM12X-08-SDXCR-07-CB 32 ADKDN-TR TWECOB-DNT DVM12X-08-STUCR/L-11-CB 32 ADKDN-TR TWECOB-DNT DVM12X-10-SCLCR/L-06-CB 32 ADKDN-TR DVM12X-10-SDNCR-07-CB 32 ADKDN-TR DVM12X-10-SDUCR/L-07-CB 32 ADKDN-TR DVM12X-10-SDXCR-07-CB 32 ADKDN-TR DVM12X-10-STUCR/L-11-CB 32 ADKDN-TR DVM12X-12-SCLCR/L-06-CB 32 ADKDN-TR DVM12X-12-SDNCR-07-CB 32 ADKDN-TR DVM12X-12-SDUCR/L-07-CB 32 ADKDN-TR DVM12X-12-SDXCR-07-CB 32 ADKDN-TR DVM12X-12-STUCR/L-11-CB 32 ADKDN-TR DVM12X-14-SCLCR/L-06-CB 32 ADKDN-TR DVM12X-14-SDNCR/L-07-CB 32 ADKDN-TR DVM12X-14-SDUCR/L-07-CB 32 ADKDN-TR DVM12X-14-SDXCR-07-CB 32 ADKDN-TR DVM12X-14-STUCR/L-11-CB 32 ADKDN-TR DVM16X-08-SCLCR/L-09-CB 32 ADKDN-UL DVM16X-08-SDNCR-07-CB 32 ADKDN-UL DVM16X-08-SDUCR/L-07-CB 32 ADKDN-UL DVM16X-08-SDXCR-07-CB 32 ADKDN-UR DVM16X-08-STUCR/L-11-CB 32 ADKDN-UR DVM16X-10-SCLCR/L-09-CB 32 ADKDN-UR DVM16X-10-SDNCR-07-CB 32 AE20M-Q-6-MBQC 61 DVM16X-10-SDUCR/L-07-CB 32 AE20M-S-6-MBQC 61 DVM16X-10-SDXCR-07-CB 32 AE25M-R-6-MBQC Call: Visit:

125 Swiss Swiss Knurling Tools Knurling Tools Knurling Tools Page Page Page Page Page ADDN-TR/L-1010-H ASVNCR/L 1010-H ST-12-2-R/L 84 CNC-20-7-R 80 MS-TPI-HS 90 ADDN-TR/L-1010-H ASVNCR/L 1212-H ST-12-R-RH/LH 84 CNC MS-TPI-HSB 90 ADDN-TR/L-1010-H ASVNCR/L 1212-K ST R/L 84 CNC ODL-TPI-C 90 ADDN-TR/L-1212-H ASVNCR/L 1616-H ST-162-R-RH/LH 84 CNC-25-2-R 80 ODL-TPI-CB 90 ADDN-TR/L-1212-H ASVNCR/L 1616-K ST-20-4-R/L 84 CNC-25-3-M 80 ODL-TPI-HS 90 ADDN-TR/L-1212-H ASVNCR/L 2020-K ST-20-M-RH/LH 84 CNC-25-4-M 80 ODL-TPI-HSB 90 ADDN-TR/L-1212-H ASVNPR/L 1010-H ST-25-4-R/L 84 CNC-25-5-O 80 ODR-TPI-C 90 ADDN-TR/L-1212-H ASVNPR/L 1212-H ST-25-M-RH/LH 84 CNC ODR-TPI-CB 90 ADDN-TR/L-1616-H ASVNPR/L 1212-K ST-32-4-R/L 84 CNC ODR-TPI-HS 90 ADDN-TR/L-1616-H ASVNPR/L 1616-K ST-32-M-RH/LH 84 CNC-25-7-R 80 ODR-TPI-HSB 90 ADDN-TR/L-1616-H ASVNPR/L 2020-K SHKT-12-D 83 CNC O-TPI-HS 90 ADDN-TR/L-1616-H ASVVBN 1010-H SHKT-162-D 83 CNC O-TPI-HSB 90 ADDN-TR/L-1616-H ASVVBN 1212-H SHKT-20-M 83 CNC-32-2-R 80 OM-TPI-HS 90 ADDN-TR/L-1616-H ASVVBN 1212-K SHKT-25-M 83 CNC-32-3-M 80 OM-TPI-HSB 90 ADDN-TR/L-2020-K ASVVBN 1616-K SHKT-32-M 83 CNC-32-4-M 80 OS-TPI-C 90 ADDN-TR/L-2020-K ASVVCN 1010-H WKT CNC-32-5-O 80 OS-TPI-CB 90 ADDN-TR/L-2020-K ASVVCN 1212-H WKT CNC OS-TPI-HS 90 ADDN-TR/L-2020-K ASVVCN 1212-K WKT CNC OS-TPI-HSB 90 ADDN-TR/L-2020-K ASVVCN 2020-K WKT CNC-32-7-R 80 PDL-TPI-C 90 ADDN-TR/L-2020-K ASVVPN 1010-H WKT-40-M 88 CS-TPI-C 89 PDL-TPI-CB 90 ANSR/L 1212-H02 67 ASVVPN 1212-H WRKT CS-TPI-CB 89 PDL-TPI-HS 90 ANSR/L 1212-H03 67 ASVVPN 1212-K WSKT CS-TPI-HS 89 PDL-TPI-HSB 90 ANSR/L 1616-H02 67 ASVVPN 1616-K WSKT CS-TPI-HSB 89 PDR-TPI-C 90 ANSR/L 1616-H03 67 DT-HP0SC-1/8X6 65 3WSKT DDL-TPI-C 90 PDR-TPI-CB 90 ASCACR/L 1010-H06 66 DT-HP0SC-6X6 65 3WSKT DDL-TPI-CB 90 PDR-TPI-HS 90 ASCACR/L 1212-H06 66 DT-HP90C-6X6 65 3WSKT DDL-TPI-HS 90 PDR-TPI-HSB 90 ASCACR/L 1212-H09 66 DT-HP90C-8/6 65 3WSKT DDL-TPI-HSB 90 P-TPI-C 90 ASCACR/L 1616-H06 66 DT-HP90CE-1/8X6 65 3WSKT DDR-TPI-C 90 P-TPI-CB 90 ASCACR/L 1616-H09 66 DT-HP-PLIERS 65 3WSKT DDR-TPI-CB 90 PM-TPI-HS 90 ASCACR/L 2020-K09 66 DT-HPTU-8X4 65 3WSKT DDR-TPI-HS 90 PM-TPI-HSB 90 ASCNCR/L 1010-H06 66 DT-HPTU-ASSY 65 ADL-TPI-C 89 DDR-TPI-HSB 90 PS-TPI-C 90 ASCNCR/L 1212-H06 66 ADL-TPI-CB 89 D-TPI-C 90 PS-TPI-CB 90 ASCNCR/L 1212-H09 66 ADL-TPI-HS 89 D-TPI-CB 90 PS-TPI-HS 90 ASCNCR/L 1616-H06 66 ADL-TPI-HSB 89 D-TPI-HS 90 PS-TPI-HSB 90 ASCNCR/L 1616-H09 66 ADR-TPI-C 89 DS-TPI-C 90 RDL-TPI-C 91 ASCNCR/L 2020-K09 66 ADR-TPI-CB 89 DS-TPI-CB 90 RDL-TPI-CB 91 ASDACR/L 1010-H07 66 ADR-TPI-HS 89 DS-TPI-HS 90 RDL-TPI-HS 91 ASDACR/L 1212-H07 66 ADR-TPI-HSB 89 DS-TPI-HSB 90 RDL-TPI-HSB 91 ASDACR/L 1212-H11 66 A-TPI-HS 89 ACEKT RDR-TPI-C 91 ASDACR/L 1616-H07 66 A-TPI-HSB 89 ACEKT RDR-TPI-CB 91 ASDACR/L 1616-H11 66 AM-TPI-HS 89 ACEKT RDR-TPI-HS 91 ASDACR/L 2020-K11 66 AM-TPI-HSB 89 ACEKT RDR-TPI-HSB 91 ASDNCR/L 1010-H07 66 AS-TPI-C 89 KT-10-D 83 R-TPI-C 91 ASDNCR/L 1212-H07 66 AS-TPI-CB 89 KT-12-D 83 R-TPI-CB 91 ASDNCR/L 1212-H11 66 AS-TPI-HS 89 KT-162-D 83 R-TPI-HS 91 ASDNCR/L 1616-H07 66 AS-TPI-HSB 89 KT-20-M 83 R-TPI-HSB 91 ASDNCR/L 1616-H11 66 BDL-TPI-C 89 KT-25-M 83 RS-TPI-C 91 ASDNCR/L 2020-K11 66 BDL-TPI-CB 89 KT-32-O 83 RS-TPI-CB 91 ASDPCN 1010-H07 66 BDL-TPI-HS 89 HDSCK-20-DW-O 83 RS-TPI-HS 91 ASDPCN 1212-H07 66 BDL-TPI-HSB 89 HDSCK-25-DW-O 83 RS-TPI-HSB 91 ASDPCN 1212-H11 66 BDR-TPI-C 89 HDSCK-25-DW-P 83 SCKN-10-DW-D 83 ASDPCN 1616-H11 66 BDR-TPI-CB 89 HDSCK-32-DW-P 83 SCKN-12-DW-D 83 ASER/L 1010-H11 67 BDR-TPI-HS 89 HDSWKT-20-O 83 SCKN-162-DW-D 83 ASER/L 1212-H11 67 BDR-TPI-HSB 89 HDSWKT-25-P 83 SCKN-20-DW-M 83 ASER/L 1616-H16 67 BS-TPI-C 89 HDSWKT-32-P 83 SCKN-25-DW-M 83 ASGTHR/L 1010-H02 67 BS-TPI-CB 89 KTM M 85 SCKN-32-DW-M 83 ASGTHR/L 1010-H03 67 BS-TPI-HS 89 KTM M 85 SCNC ASGTHR/L 1212-H02 67 BS-TPI-HSB 89 KTM M 85 SCNC ASGTHR/L 1212-H03 67 CDL-TPI-C 89 KTM M 85 SCNC ASGTHR/L 1616-H02 67 CDL-TPI-CB 89 KTM M 85 SCNC ASGTHR/L 1616-H03 67 CDL-TPI-HS 89 KTM M 85 SCNC-10-7-D 82 ASGTHR/L 2020-K02 67 CDL-TPI-HSB 89 KTO O 85 SCNC ASGTHR/L 2020-K03 67 CDR-TPI-C 89 KTO O 85 SCNC ASGTHR/L 2525-K02 67 CDR-TPI-CB 89 KTW SCNC ASGTHR/L 2525-K03 67 CDR-TPI-HS 89 KTW SCNC ASTACR/L 1010-H11 66 CDR-TPI-HSB 89 KTW SCNC-12-7-D 82 ASTACR/L 1212-H11 66 C-TPI-HS 89 KTW SCNC ASTACR/L 1616-H11 66 C-TPI-HSB 89 KTW SCNC ASTACR/L 2020-K11 66 CM-TPI-HS 89 KTW SCNC ASTNCR/L 1010-H11 66 CM-TPI-HSB 89 KTW SCNC ASTNCR/L 1212-H11 66 CNC R/L 85 KTW SCNC D 82 ASTNCR/L 1616-H11 66 CNC M-R/L 85 MDL-TPI-C 90 SDL-TPI-C 91 ASTNCR/L 1616-H16 66 CNC R/L 85 MDL-TPI-CB 90 SDL-TPI-CB 91 ASTVOR/L 1010-H16 67 CNC M-R/L 85 MDL-TPI-HS 90 SDL-TPI-HS 91 ASTVOR/L 1212-H16 67 CNC R/L 85 MDL-TPI-HSB 90 SDL-TPI-HSB 91 ASTVOR/L 1616-H16 67 CNC M-R/L 85 MDR-TPI-C 90 SDR-TPI-C 91 ASVABR/L 1010-H11 66 CNC R/L 85 MDR-TPI-CB 90 SDR-TPI-CB 91 ASVABR/L 1212-H11 66 CNC M-R/L 85 MDR-TPI-HS 90 SDR-TPI-HS 91 ASVABR/L 1212-K16 66 CNC R/L 85 MDR-TPI-HSB 90 SDR-TPI-HSB 91 ASVABR/L 1616-K16 66 CNC M-R/L 85 M-TPI-C 90 SKT ASVABR/L 2020-K16 66 CNC R/L 85 M-TPI-CB 90 SKT ASVACR/L 1010-H11 66 CNC M-R/L 85 M-TPI-HS 90 SKT ASVACR/L 1212-H11 66 CNC M-TPI-HSB 90 SKT ASVACR/L 1212-K16 66 CNC MMKT-10-D 84 SKT ASVACR/L 1616-K16 66 CNC-20-2-R 80 MMKT-12-R 84 SKT ASVNBR/L 1010-H11 66 CNC-20-3-M 80 MMKT-20-O 84 S-TPI-HS 91 ASVNBR/L 1212-H11 66 CNC-20-4-M 80 MMKT-25-O 84 S-TPI-HSB 91 ASVNBR/L 1212-K16 66 CNC-20-5-O 80 MMKT-32-P 84 SIKT ASVNBR/L 1616-K16 66 CNC MS-TPI-C 90 SIKT ASVNBR/L 2020-K16 66 CNC MS-TPI-CB 90 SIKT Call: Visit:

126 Knurling Tools Milling Milling Milling Tool Post Page Page Page Page Page SIKT APHT PDR-NU 101 QV-50-S TDEX EN 105 D25AXA SM-TPI-HS 91 APHT PDR-NU 101 RDHT 12T3 MOEN-MM 101 TDEX EN 105 D25AXA SM-TPI-HSB 91 APKT PDSR-KR 101 RDKW 1003 MOSN-KU 102 TEHW-0602-AEEN 105 D25AXA SSCK-10-DW-2 83 APKT PDSR-MM 101 RDKW 1003 MOSN-PU 102 TNH 1204 ANSN-KM 104 D25AXA-41M-25-DUAL 111 SSCK-12-DW-2 83 APKT PDSR-PM 101 RDKW 12T3 MOSN-KU 102 TPKN 1603 PDSR-KM 104 D25AXA-4M-20-DUAL 111 SSCK-162-DW-2 83 APKT PDSR-PR 101 RDKW 12T3 MOSN-PU 102 TPKN 1603 PDSR-PM 104 D25AXA-7-71C 112 SSCK-20-DW-4 83 APKT PDSR-KR 101 RDKW 1604 MOSN-KU 102 TPKN 2204 PDSR-KM 104 D30BXA SSCK-25-DW-4 83 APKT PDSR-MM 101 RDKW 1604 MOSN-PU 102 TPKN 2204 PDSR-PM 104 D30BXA SSCK-32-DW-4 83 APKT PDSR-PM 101 REC15-50-CN VPGT NU 105 D30BXA SS-TPI-C 91 APKT PDSR-PR 101 REC15-50-CN VPGT NU 105 D30BXA-41M-32-DUAL 111 SS-TPI-CB 91 APKT PDSR-PU 101 REC15A-076-CN WCGT-06T308-NU 105 D30BXA-4M-25-DUAL 111 SS-TPI-HS 91 APKT PDSR-PU 101 REC15A-100-CN D30BXA-7-71C 112 SS-TPI-HSB 91 APKT PDSR-PU 101 REC15A-125-CN D35CXA SSWKT C60-20-TD REMW 1304MOSN-KM 102 D35CXA SSWKT C60-25-TD REMW 1304MOSN-MM 102 D35CXA SSWKT C60-35-TD REMW 1304MOSN-PM 102 D35CXA-41M-32-DUAL 111 SSWKT C60-40-TD SDGX-09C01-E 105 D35CXA-4M-25-DUAL 111 SSWKT C60-50-TD SDGX-09C03-E 105 D35CXA SSWKT C60-65-TD SDGX-09C04-E 105 D35CXA-7-71C 112 SW2-TPI-C 91 D15X-12-TD SDGX-19C05-E 105 D40CA SW2-TPI-CB 91 D15X-25-TD SDGX-19C06-E 105 D40CA SW2-TPI-HS 91 D15X-50-TD SDGX-19C07-E 105 D40CA SW2-TPI-HSB 91 D15X-65-TD SDGX-19C08-E 105 D40CA-41M-40-DUAL 111 SW2L-TPI-C 91 D45X-12-TD SDGX-19C09-E 105 D40CA-4M-32-DUAL 111 SW2L-TPI-CB 91 D45X-20-TD SDGX-19C10-E 105 D40CA SW2L-TPI-HS 91 D45X-25-TD SDGX-19C11-E 105 D40CA-7-71C 112 SW2L-TPI-HSB 91 D45X-25-TD SDGX-19C12-E 105 D50DA SW2R-TPI-C 91 D45X-50-TD SDGX-19C13-E 105 D50DA SW2R-TPI-CB 91 D45X-60-TD SDGX-19C14-E 105 D50DA-41M-50-DUAL 111 SW2R-TPI-HS 91 D45X-65-TD SDGX-19C15-E 105 D50DA-4M-40-DUAL 111 SW2R-TPI-HSB 91 D60X-12-TD SDGX-19C16-E 105 D50DA SW2S-TPI-C 91 D60X-20-TD SDHT 1204 AESN-KU 102 D50DA-7-71C 112 SW2S-TPI-CB 91 D60X-25-TD SDHT 1204 AESN-MU 102 D60EA SW2S-TPI-HS 91 D60X-35-TD SDHT 1204 AESN-PU 102 D60EA SW2S-TPI-HSB 91 D60X-50-TD SDHT 1504 AESN-PU 102 D60EA-41M-60-DUAL 111 SW4-TPI-C 91 D60X-60-TD SDHT-1204 AEN-NU 102 D60EA-4M-50-DUAL 111 SW4-TPI-CB 91 D60X-65-TD SDHT-1504 AEN-NU 102 D60EA SW4-TPI-HS 91 DKC15HM 99 SDHW EN 105 D60EA-7-71C 112 SW4-TPI-HSB 91 DKP20UM 99 SDMT SN-PU 102 DQ35CXA-41SM-40-DUAL 111 SW4L-TPI-C 91 DMP35UM 99 SDMT SN-PU 102 DQ35CXA-41SM-40-DUAL 118 SW4L-TPI-CB 91 DMP40RM 99 SDMT 1205 PDSR-PU 102 DQ40CA-41SM-50-DUAL 111 SW4L-TPI-HS 91 DNC15UM 99 SEHT-1204 AEN-NU 102 DQ40CA-41SM-50-DUAL 118 SW4L-TPI-HSB 91 DNP10HM 99 SEKN 1203 AEN-MM 103 DQ50DA-41SM-60-DUAL 111 SW4R-TPI-C 91 DNU10GM 99 SEKN 1203 ASN-KM 103 DQ50DA-41SM-60-DUAL 118 SW4R-TPI-CB 91 DPC20HM 99 SEKN 1203 ASN-PM 103 DQ60EA-41SM-80-DUAL 111 SW4R-TPI-HS 91 DPC30UM 99 SEKN 1504 AEN-MM 103 DQ60EA-41SM-80-DUAL 118 SW4R-TPI-HSB 91 DPP25GM 99 SEKN 1504 ASN-KM 103 QITP25N SW4S-TPI-C 91 DPP35RM 99 SEKN 1504 ASN-PM 103 QITP25N SW4S-TPI-CB 91 DPP40SM 99 SEKR 1203 AEN-MM 103 QITP25N SW4S-TPI-HS 91 DWKC-195-TE SEKR 1203 ASN-PM 103 QITP25N-4M-20-DUAL 118 SW4S-TPI-HSB 91 DWKC-196-TE SEKT 1204 AEN-MM 103 QITP25N-7-71C 119 SWKT-10-D 83 DWKC-225-TE SEKT 1204 ASN-PM 103 QITP30N SWKT-12-D 83 DWKC-226-TE SEKW 1204 AEN-MM 103 QITP30N SWKT-162-D 83 DWKC-228-TE SEKW 1204 ASN-KM 103 QITP30N SWKT-20-M 83 DWKC-256-TE SEKW 1204 ASN-PM 103 QITP30N-4M-25-DUAL 118 SWKT-25-O 83 DWKC-2810-TE SLOT-21-SP QITP30N-7-71C 119 SWKT-32-O 83 DWKC-286-TE SLOT-25-SP QITP35N SWKT-831-B 83 DWKC-288-TE SLOT-28-SP QITP35N TIKT-12-B 84 DWKC-3210-TE SLOT-32-SP QITP35N TIKT-20-D 84 DWKC-328-TE SLOT-36-SD QITP35N-41M-32-DUAL 118 TIKT-25-R 84 DWKC-4510-TE SLOT-40-SD QITP35N-4M-25-DUAL 118 TIKT-32-M 84 E90-32-WC SLOT-45-SD QITP35N E90-50-VC SLOT-50-SD QITP35N-7-71C 119 E90-50-VC SNEX 1206 ANN-M 103 QITP40N E90-50-WC SNMX 1206 ANSN-KM 103 QITP40N E90A-050-WC SNMX 1206 ANSN-MM 103 QITP40N E90A-063-WC SNMX 1206 ANSN-PM 103 QITP40N-41M-40-DUAL 118 E90A-075-WC SNMX SN-KM 103 QITP40N-4M-32-DUAL 118 E90A-100-VC SNMX SN-MM 103 QITP40N E90A-100-WC SNMX SN-PM 103 QITP40N-7-71C 119 E90A-125-VC SNMX SN-KM 103 QITP50N E90A-125-WC SNMX SN-PM 103 QITP50N E90A-50-VC SPKN 1203 EDSR-KM 104 QITP50N-41M-50-DUAL 118 E90A-63-VC SPKN 1203 EDSR-PM 104 QITP50N-4M-40-DUAL 118 E90A-75-VC SPKN 1504 EDSR-KM 104 QITP50N E90XL-20-VP SPKN 1504 EDSR-PM 104 QITP50N-7-71C 119 E90XL-25-VP SPKR 1203 EDSR-PM 104 QITP60N E90XL-32-VP SPMT EN-PU 104 QITP60N E90XL-42-VP TDEX EN 105 QITP60N-41M-60-DUAL 118 OER SN-PU 101 TDEX EN 105 QITP60N-4M-50-DUAL 118 OEX 05T305 SN-PU 101 TDEX EN 105 QITP60N QV-16-S TDEX EN 105 QITP60N-7-71C 119 QV-16-S TDEX EN 105 QV-25-S TDEX EN 105 QV-25-S TDEX EN 105 QV-25-S TDEX EN 105 QV-25-S TDEX-17T304-EN 105 QV-25-S TDEX-17T308-EN 105 QV-25-S TDEX EN 105 QV-50-S TDEX EN Call: Visit:

127 NOTES: Call: Visit:

128 ontana Liri Italy MPR08 DT 2017MTG METRIC TOOL GUIDE for everyday machining Dorian Tool International, Inc. 615 County Rd 219, East Bernard TX 77435, USA Phone: Toll free: ax: